We validate the header extensions length of an RTP buffer by comparing
it against the block size. Since we multiply the length in words by 4 to
get the length in bytes, a suitably large length could cause a wrapround
of the uint16, giving a lower length which erroneously passes the check
and allows the buffer to be mapped.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/864>
This is explicitly specified as valid in the RFC, where the
syntax for both parameters is:
";" "client_port" "=" port [ "-" port ]
";" "server_port" "=" port [ "-" port ]
This is useful for applications where RTCP is either not necessary
or not possible.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/846>
When user is passing the actual interlace-mode when calling
gst_video_decoder_set_interlaced_output_state() it should not be
overidden by the input interlace-mode.
Needed to fix#825 as we want to keep interlace-mode=interleaved from
parsers and have the OMX decoder producing interlace-mode=alternate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/852>
Rename remaining `gst_video_color_transfer_{encode,decode}` functions on
the `GstVideoTransferFunction` enumeration to
`gst_video_transfer_function_{encode,decode}` permitting
gobject-introspection to turn these into associated functions and place
them under the respective `<enumeration>` block in gir XML files.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/805>
gst_pad_get_current_caps() may be wrong when there is a renegotiation in
progress for the pad and we have not yet received or selected the buffer
with different caps yet.
Fix by storing the caps through in a similar way to the existing code
for buffer/video-info selection machinery.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/813>
This allows subclasses that notice missing reference frames to request a
new sync point to allow seamless decoding again. While doing so the
subclass can also signal whether it wants a) all following input frames
until the sync point to be discarded or b) all output frames until the
sync point to be marked as corrupt.
Sending of force-keyunit events for this can be throttled by the
application via the "min-force-keyunit-interval" property.
This replaces custom behaviour for the same in various decoders, for
example openh264dec.
Based on patches by Haakon Sporsheim <haakon@pexip.com> and
Stian Selnes <stian@pexip.com>.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/730>
If the first frame(s) at the very beginning or after a flush are not a
sync point then the base class would discard them before passing them to
the subclass.
This also fixes the previously broken distance_from_sync handling: it
was never reset at sync points.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/730>
This can be used by applications to configure decoders so that corrupted
frames are directly discarded instead of being forwarded inside the
pipeline. It is a replacement for the "output-corrupt" property of the
ffmpeg decoders.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/730>
This can be used by subclasses to mark output frames as known to be
corrupted, for example if reference frames were missing. ffmpeg's
decoders can signal this.
In addition this flag is propagated downstream if the input frame had it
set.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/730>
This is not actually required (anymore?). Source pad caps can be
negotiated at any time regardless of any configured (or existing) sink
pads and videoaggregator comes up with some fixated caps based on the
downstream caps.
Subclasses can override this behaviour as needed by overriding
update_src_caps().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/793>
`gst_gl_memory_read_pixels` reads pixels from `GLMemory` into the
pointer, effectively writing to it. This is opposite from
`gst_gl_memory_texsubimage` which reads texture data from `read_pointer`
into `GLMemory`.
Both cases are clarified by changing `read_pointer` to `write_pointer`,
and explaining what `gst_gl_memory_texsubimage` does in addition to
referring back to `gst_gl_memory_read_pixels`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/806>
These then don't require going through the generic code path via AYUV64
first but can be converted directly.
This speeds up processing of
videotestsrc ! v210 ! videoconvert ! other_format ! fakesink
by a factor of 1.55 for I420/YV12 and 1.40 for the other destination
formats and reduces memory pressure considerably.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/775>
The type is called GstVideoTransferFunction so the function names should
match, otherwise gobject-introspection is keeping the functions as
global functions instead of methods on the type.
The same mistake was also made in lots of other APIs over the years, but
here we can at least fix it for 1.18 still.
Thanks to Marijn Suijten for noticing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/807>
For audio we copy metas that have no tags at all, or that only have the
"audio" and/or "audio-channels" tag. Audio codecs don't change the
audio aspect of the stream and in almost all cases don't change the
number of channels. They might however change the sample rate (e.g.
Opus). Subclasses that change the number of channels will have to
override ::transform_meta() accordingly.
For video we copy metas that have no tags at all, or that only have the
"video" and/or "video-size" and/or "video-orientation" tag. Video codecs
don't change the "video" aspect of the stream and in almost all cases
don't change the resolution or orientation. Subclasses that rescale or
change the orientation will have to override ::transform_meta()
accordingly.
See https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/576#note_610581
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/801>
Some languages have an ISO 639-2 representation but no 639-1
representation, for example where "eng" has a two-letter
equivalent in "en", "enm" doesn't have one.
Discarding those languages from our static table caused functions
such as gst_tag_get_language_code_iso_639_2T() or
gst_tag_get_language_code_iso_639_2B() to return NULL for
valid language codes such as "enm", potentially causing users
of these API such as mpegtsmux to discard language code tags
as invalid.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/785>
Call gst_aggregator_selected_samples() after filling the queues
(but before preparing frames).
Implement GstAggregator.peek_next_sample.
Add an example that demonstrates usage of the new API in combination
with the existing buffer-consumed signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/728>
5 seconds might not be enough value for timeout in case an application
is running on a device with very limited computing power.
Note that ANGLE uses 10 seconds timeout value. So even if a timeout
happens here, it's also ANGLE's timeout condition as well
(meaning that bad things will happen either way)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/769>
It was not working properly and the implementation of the smartencoder
element was weird. This introduce a number of changes (which are all
in one single commit because they basically all work together and lead
to basically reimplementing the element):
* Make smartencoder a bin so that the reencoding chain of elements are
inside of it instead of not having any parent. Those elements were not
be visible when dumping the pipeline which was very confusing.
* Make encodebin create the right encoder with a capsfilter (and parser)
to properly enforce the format specified by the user, and so that the
encoder properties specified in the encoding profile are respected.
* Use `decodebin` to do the decoding instead of selecting a decoder
ourself and not plug any parser etc...
* Ensure that negotiated format in the sinkpad of smart encoder is fixed
through time when the user requested a non dynamic output
* Add a parser at the beginning of the smart encoder
* Handle errors when reencoding
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/751>
This adds linear 32x32 NV12 based tiles. This format is notably used by
Allwinner VCU and exposed in V4L2 as being "SUNXI Tiled" format. In this
patch we generalize the plane info calculation so we can share this part
with the 4L4 variant.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/754>
All UI elements will follow Single-Threaded Apartments (STA) model.
As a result, we should access them from dedicated UI thread.
Due to the nature of the threading model, ANGLE will wait the UI
thread while closing internal window/swapchain objects.
A problem here is that when destroying GstGLWindow from the UI thread,
it will wait GstGLContext's internal thread. Meanwhile, the GstGLContext's
internal thread will be blocked because ANGLE wants to access the UI thread.
That will cause a deadlock or exceptions.
In short, application should not try to call
gst_element_set_state(pipeline, GST_STATE_NULL) from a UI thread.
That's a limitation of current implementation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/745>
Add property "handle-segment-change" for user to allow pushing
custom segment event. For now, this property can work only for
time format GstSegment.
This property can be useful in case application controls timeline
of stream such as there is timestamp discontinuity but playback is
expected to be continuous. Multi-period scenario of MPEG-DASH is an
example of this use case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/663>
Since we are using VideoMeta, the converter (similarly to the video_frame_copy
utility) should have no issue dealing with frames that are slightly larger.
This situation occure as some element will use padded width/height for
allocation, which results in a VideoMeta width/height being larger then the
display width/height found in the negotiated caps.
Fixes#790
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/747>
For example, BT709, BT601, and BT2020_10 all have theoretically
different transfer functions, but the same function in practice. In
these cases, we should use the fast path for negotiating. Also,
BT2020_12 is essentially the same as the other three, just with one more
decimal point, so it gives the same result for fewer bits. This is now
also aliased to the former three.
Also make videoconvert do passthrough if the caps have equivalent
transfer functions but are otherwise matching.
As of the previous commit, we write the correct transfer function for
BT601, instead of the (functionally identical but different ISO code)
transfer function for BT709. Files created using GStreamer prior to that
commit write the wrong transfer function for BT601 and are, strictly
speaking, 2:4:5:4 instead. However, this commit takes care of
negotiation, so that conversions from/to the same transfer function are
done using the fast path.
Fixes#783
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/724>
If the cropping or scaling input or output rects put us completely
outside the input/output frame respectively, we can't draw anything
except black safely. Check for those conditions and don't set up a
configuration that attempts to access out of bounds memory outside
the input/output framebuffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/696>
If the frames passed in to gst_video_converter_frame()
have a different layout than was configured for, the
conversion code might go out of bounds and crash.
Do a sanity check on each frame passed in, and in the
absence of a return value in the API, just
refuse the conversion in invalid cases and leave the
destination frame untouched so it's obvious to
users that it was broken.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/696>
This patch was taken from #629#note_178766, the comment made
at the time was:
The root issue is a mismatch between the initialization of render_rect
in GstGLWindowX11Private and what's expected in the draw_cb function.
Because render_rect is not explicitly initialized to a width and height
of -1 (unlike gstglwindow_wayland_egl.c which does initialize to -1),
the less-than check for explicitly-set render_rect at gstglwindow_x11.c:453-454
always fails, even when the parent_win has been set and the render rectangle
has never been set.
Maybe this came from copying the similar check in the wayland code? Regardless,
I think the correct inequality should be '<= 0' (on both lines).
Alternatively initialization could be changed, but other sinks, e.g.
xvimagesink don't appear to use -1 to mean "unset" render_rect this way.
The issue can be reproduced by running the example in
tests/examples/gl/qt/videooverlay/ on X11, and resizing the output
window
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/701>
Previously we only handled one event at a time, which could lead to the
following two suboptimal situations:
- frame 0 at 20ms, frame 1 at 40ms and two force-keyunit events at 10ms
and 15ms. We would create a new keyframe for both of the frames.
- 100 force-keyunit events with running-time NONE would cause all
following 100 frames to be made into a keyframe.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/684>
Also not optimal but at least simplifies the code a bit and doesn't
require g_list_length() and g_list_append() in a few places.
For 2.0 there are some more candidates to change but unfortunately
they're currently part of the API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/683>
This means we cannot access [view layer] or view.bounds from the OpenGL
thread. This also means that we need to call the main thread when
setting the window handle. However, we cannot perform that
synchronously as that may deadlock with the application performing the
set_window_handle() call.
We need to defer the actual update and run it asynchronously and wait
for the window handle update internally at each point it is needed.
Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/372
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/681>
The gir generator wrongly assume that the vfunc
GstGLFilterClass.filter() and the method gst_gl_filter_filter_texture()
are related. As a result it complains about not matching argument names.
Workaround this by naming both of their arguments input and output.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/664>
the old manner does not consider the profile idc. The profile idc should
play an more important role in recognizing the profile than the other
information. And there is no need to mix profiles of different extensions
together to find the closest profile when the bits stream is not standard,
different extensions support different features and should not be mixed.
The correct way should be recognize the extension category by profile idc
firstly, and then find the closest profile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/645>
GstH265FormatRangeExtensionProfile declares the common bits used
for not only format range extensions profiles, but also for several
different h265 extension profiles, such as high throughput, screen
content coding extensions, etc. And So the old name is not proper.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/645>
If there are two elements and threads attempting to query each other for
an OpenGL context. The locking may result in a deadlock.
We need to unlock each element's context_lock when querying another
element for the OpenGL context in order to allow any other element to
take the lock when the other element is querying for an OpenGL context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/642>
When receiving an instant-rate-change event, store the updated
seek flags and replace the flags in any input segments with them
to allow for instant switching between trickmodes and not.
When receiving an instant-rate-change event, store the updated
seek flags and replace the flags in any input segments with them
to allow for instant switching between trickmodes and not.
It's possible that a buffer might be within the segment proper,
but not within the "valid" part we're playing, which is only
things after the 'offset' part of the segment. In that case,
the running-times of the buffer-start and buffer-stop will be
GST_CLOCK_TIME_NONE, and we'd better not schedule playback that
far in the future.
This commit modifies GstVideoMasteringDisplayInfo and GstVideoContentLightLevel
structs so that each value is to be more like hdr_metadata_infoframe struct
of linux drm header and DXGI_HDR_METADATA_HDR10 struct of Windows.
So each value is no more fraction but normalized one as per CTA 861.G spec.
Also the unit of each value will be consistent with H.264, H.265
specifications, hdr_metadata_infoframe struct for linux and
DXGI_HDR_METADATA_HDR10 struct for Windows.
[38/1301] Generating GstVideo-1.0.gir with a custom command.
../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideoaggregator.c:231: Error: GstVideo: identifier not found on the first line:
*
^
Because the color value is stored in MSB, so we can reuse the
Y210 code for P012_LE / P012_BE
Sample pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw,format=Y212_LE ! glimagesink
This can be used to have compositor display either the background
or a stream on a lower zorder after a live input stream freezes
for a certain amount of time, for example because of network
issues.
gst_gl_window_quit() will attempt to send a message but will be called
from GstGLContext's finalize handler and so the weak ref that backs
gst_gl_window_get_context will return NULL as it has already been
cleared. We need that context in send_message_async to decide whether
to run the provided callback immediately or queue in GCD
Without this fix, it is possible that outbuf is not initialized, which
will result in segfault when call gst_buffer_replace (&outbuf, NULL). In
addition, the patch fixes potential memory leak in restart path.
The segfault can be reproduced by the pipeline below:
GST_GL_PLATFORM=egl \
gst-launch-1.0 videotestsrc ! msdkh265enc ! msdkh265dec ! \
'video/x-raw(memory:DMABuf)' ! glimagesink
In the situation that the direct dmabuf path is chosen, but with an
unsupported texture format, this causes accept to fail rather than
continue and fail at the upload stage. It is also possibly necessary to
reconfigure after falling back from direct to non-direct dmabuf upload
paths.
The wordlen ("length") MUST represent the total "number of 32-bit words
in the extension, excluding the four-octet extension header" (rfc3550).
There are cases where already existent padding is reused for adding
the new extension. So the new wordlen should be updated if the new
added extension makes it to increase.
This patch introduces a new API to send and parse mouse scroll events. Mouse
event coordinates are sent relative to the display space of the related output
area. This is usually the size in pixels of the window associated with the
element implementing the GstNavigation interface.
This patch introduces a property which, if set to FALSE, prevents RTP
basepayloader from scaling the RTP time when a segment's rate is not
equal to 1.0. The specification is ambiguous on this subject and some
clients expect the timestamps not to be scaled.
This allows us to remove races when setting the wl_queue on wayland
objects with wl_proxy_set_queue() as each created object is created with
the queue already set.
We can also move all our initilization code into the window as we
can retrieve all wayland objects from each window instance. This
removes a possible race when integrating with external API's as we would
always attempt to immediately retrieve a small set of wayland objects.
That is no longer the case with the objects from each window instance.
Automatic negotiation of texture-target=external-oes does not work
without separating the external-oes support out of the DirectDmabuf
uploader into a separate DirectDmabufExternal uploader.
gst_gl_upload_transform_caps() is missing a NULL pointer check in case
the current upload method's transform_caps returns a NULL pointer. In
the following loop over all upload methods, NULL pointer return values
are already handled correctly.
Some drivers support directly importing DMA buffers in some formats into
external-oes textures only, for example because the hardware contains
native YUV samplers.
Note that in these cases colorimetry can only be passed as hints and
there is no feedback whether the driver supports the required YUV
encoding matrix and quantization range.
Allow creating EGL images from DMA buffers in formats that the driver
only supports for the external-oes texture target.
Pass the intended texture target to gst_egl_image_from_dmabuf_direct so
that _gst_egl_image_check_dmabuf_direct can decide whether to create an
EGL image for a format that can only be targeted at external-oes
textures by the driver. Allow creating GstGLMemoryEGL objects from these
DMA buffers.
The GST_VIDEO_BUFFER_FLAG_TOP_FIELD flag is a superset of
GST_VIDEO_BUFFER_FLAG_BOTTOM_FIELD as they are defined using other
flags. As a result we can't use GST_BUFFER_FLAG_IS_SET() to check for
those flags.
ANGLE_surface_d3d_render_to_back_buffer extension is only available
with Microsoft fork of ANGLE. Note that Microsoft's ANGLE repository
has been deprecated.
Previously we would simply use them without any locking at all, while
using the object lock for setting them. Nothing prevented new callbacks
to be set in the meantime, potentially calling a callback with already
freed user_data.
To prevent this move the callbacks into a reference counted struct and
use the appsrc/appsink mutex to protect access to it, which is used in
all functions calling the callbacks already anyway.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/issues/729
