This allows us to easily get ahold of all pads on a stream-topology message, including
pre-decoder ones, while "pad" only gives us access to the raw pads (as used by discoverer).
Set up targets on READY->PAUSED state change to passthrough by
default. This prevents the targets from being unset on the
first run, while the 'raw' variable would mean that some
target is set.
The identity element should be handled by the GstBin's cleanup,
removing it on the remove_elements function might remove it
too soon, as this function can be called directly from playsink
The playsink was nastily poking a boolean in the structure.
Make those booleans properties, so we are told when they change,
and rebuild the conversion bin when they do.
Some cleanup to go with it too.
https://bugzilla.gnome.org/show_bug.cgi?id=661262
ie, audio/x-raw- for audio, video/x-raw- for video.
Add a trailing - to be more specific. I doubt there's anything
like audio/x-rawhide or something, but you never know.
https://bugzilla.gnome.org/show_bug.cgi?id=661262
The code was doing counterintuitive rewiring of pads when the
bin did not contain any elements. We now add an identity element
in that case, which makes it simpler, and should fix the AC3
passthrough mode when using pulseaudio (but I don't see the bug
here so can't test).
https://bugzilla.gnome.org/show_bug.cgi?id=661262
This is made possible by filtering errors. This is required to let
harware accelerated element query the video context. The video context
is used to determine if the HW is capable, and thus if the element is
supported or not.
Fixes bug #662330.
If the pad block never happens because there is no data flow at all, the
callback is never fired and the reference is never released. This causes a
reference cycle between the pad and element, so valgrind is not very vocal
about it (memory is still reachable).
The bins' getcaps was bypassing the inner elements, and thus
failing to account for the caps transformations they allow,
which caused YUV video pipelines to fail with ximagesink, which
does not support YUV, even though the convenience bin includes
a colorspace converter for just this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=660816
The new code was checking for a prefix, and would find video/
first. Check in two passes, first checking for a perfect match,
and falling back to a prefix check if nothing was found.
https://bugzilla.gnome.org/show_bug.cgi?id=657261
The fact that a decoder is not compatible with the fixed sink
is currently happenning in the case where we have hardware accelerated
video decoders on the system (especially vaapi elements that are actually plugged),
and the user is providing a sink that doesn't support the surface.
A simple example that shows how it used to crash on a system where gstreamer-vaapi
is installed:
gst-launch playbin2 video-sink=xvimagesink uri=/codec/supported/by/vaapi
What we are now doing in this case, is avoid using the accelerated
decoder and plug a "normal" decoder instead (if avalaible).
This commit doesn't handle the case where we have hardware accelerated
demuxing.
gstsubtitleoverlay.c: In function 'gst_subtitle_overlay_video_sink_event':
gstsubtitleoverlay.c:1736:22: error: 'target' may be used uninitialized in this function
With unfixed caps we can't reliably decide if the final caps
are going to be "raw" (e.g. supported by a sink) or not.
We will get here again later when the caps are fixed.
If subdrained isn't initialized to FALSE then a chain might think
that its group is drained when in fact it's not and this can cause
a switch too early or even cause a deadlock.
This reverts commit b0b4e286c8.
We agreed that the previous (pre-.35) behaviour is broken and a bug and the
current behaviour is correct, deterministic and allows the application to
handle stuff properly while the old behaviour can't be handled properly by
applications and just worked in some applications by luck.
The solution to the problem that was solved by relying on the old, broken
behaviour would be, to make decodebin2/playbin2 more aware of decoders and
improve the autoplugging of decoders by considering the caps supported by the
sink instead of just using something with the highest rank.
See bug #656923.
Fixes regression since 0.10.33 where sinks that can cope with non raw
caps or custom caps are not autoplugged if there's a sink configured
with the properties video-sink and audio-sink which cannot handle
the stream. This change checks for compatibility on the configured one
and use it if success. Otherwhise it tries with the found factories.
This reverts commit a22faad18a. Instead
of disabling subtitles completelly when video stream have custom caps,
just let the sutbtileoverlay cope with them as now it's able to.
Implement handling of non raw video streams by avoiding colorspace
elements and autoplugging a compatible renderer if available. Fallback
to passthrough if no compatible renderer is found.
Only log in debug log for now, since the check is a bit
half-hearted, its purpose is mostly to make sure people
use gst_filename_to_uri() or g_filename_to_uri().
https://bugzilla.gnome.org/show_bug.cgi?id=654673
g_value_get_object() does not give us our own ref.
Fixes "Trying to dispose object "flacparse", but it still has a parent "registry0".
You need to let the parent manage the object instead of unreffing the object directly."
and similar warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=658416
This is done by adding a capsfilter after every parser/converter that contains
all possible caps supported by downstream elements. A capsfilter is necessary
here because the decoder is only selected after the parser selected a format
and the parser can't know what downstream would support otherwise.
This reverts commit 105814e2c7.
The general consensus seems to be that we should revert this for
now. If such behaviour is desired, we should probably enable it
via a flag. And maybe use the scaletempo plugin instead.
Make enums for the chroma siting for easier use in the videoinfo.
Make enums for the color range, color matrix, transfer function and the
color primaries. Add these values to the video info structure in a Colorimetry
structure. These values define the exact colors and are needed to perform
correct colorspace conversion. Use a couple of predefined colorimetry specs
because in practice only a few combinations are in use.
Add view_id to the video frames to identify the view this frame represents in
multiview video.
Remove old gst_video_parse_caps_framerate, use the videoinfo for this.
Port elements to new colorimetry info.
Remove deprecated colorspace property from videotestsrc.
Rework the audio caps similar to the video caps. Remove
width/depth/endianness/signed fields and replace with a simple string
format and media type audio/x-raw.
Create a GstAudioInfo and some helper methods to parse caps.
Remove duplicate code from the ringbuffer and replace with audio info.
Use AudioInfo in the base audio filter class.
Port elements to new API.
Instead of just assuming all pads are created at the same time,
remember which ones are actually new (via ->pending_blocked_pads).
This allows the following use-case to properly work:
* Upstream starts with audio-only
* Only that pad gets data, blocks and a real audio sink is created
* Upstream laters adds a video stream
* A new pad is requested, blocks and reconfiguration kicks in in
order to add a new real video sink
When we don't have specific {audio|video|text}-sink properties, don't
set them on playsink when reconfiguring.
If we do that, we end up setting the previous configured sink to
GST_STATE_NULL resulting in any potentially pending push being returned
with GST_FLOW_WRONG_STATE which will cause the upstream elements to
silently stop.
https://bugzilla.gnome.org/show_bug.cgi?id=655279
When we have a multi-stream (i.e. audio and video) input and the demuxer
adds/removes pads for a new stream (common in a mpeg-ts stream when the
program stream mapping is updated), the algorithm for EOS handling was
previously wrong (it would only drop the EOS of the *last* pad but would
let the EOS on the other pads go through).
The logic has only been changed a tiny bit for EOS handling resulting in:
* If there is no next group, let the EOS go through
* If there is a next group, but not all pads are drained in the active
group, drop the EOS event
* If there is a next group and all pads are drained, then the ghostpads
will be removed and the EOS event will be dropped automatically.
This allows us to make parsers accept both parsed and unparsed input
without decodebin plugging them in a loop until things blow up, ie.
without affecting applications that still use the old playbin or the
old decodebin.
(Making parsers accept parsed input is useful for later when we want
to use parsers to convert the stream-format into something the decoder
can handle. It's also much more convenient for application authors
who can plug parsers unconditionally in transcoding pipelines, for
example).
This is especially needed when switching between a non-sparse and sparse
video stream, see bug #537382. It also lowers the time needed for switching
between streams a bit.
In particular, in audio only cases whose (estimated) metadata provides bitrate
information, the buffer-size based on such bitrate (and buffer-duration)
will be much more reasonable than queue2 default buffer-size.
For streams at low bitrates we need to set a limit in time because the limit
in bytes might not reached too late, sometimes more than 30 seconds.
This limit can only be set if upstream is seekable (see #584104)
Closes#647769
These reconfigure based on the caps and plugin in converters if
necessary. This also makes switching between compressed and raw
streams work flawlessly without loosing the states of any element
somewhere or having running time problems.
Before playbin2 would use different selectors for raw audio and
compressed audio (and the same for video) and used different
pads from playsink. This made the involved logic much more
complex and was not implemented completely in playsink, which
made it impossible to support files with a compressed and
uncompressed stream that is support by the sink.
playbin2 handles raw/non-raw streams the same now and the
decision is left to playsink, which now can also handle
caps changes from raw to non-raw and the other way around.
Fixes bug #632788.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the
needed Android.mk files.
Androgenizer can be found here:
http://git.collabora.co.uk/?p=user/derek/androgenizer.git
In addition to ensuring that an element we want to select in
autoplug-select can enter the READY state, we also now check if it can
accept the caps we wish to plug it for. This is handy for sinks that
need to perform a probe to figure out whether they can actually handle a
given format.
Post better error messages in case typefind/decodebin2 are missing or
could not be loaded for some reason (e.g. because they inadvertently
got blacklisted).
https://bugzilla.gnome.org/show_bug.cgi?id=644892
Parsers are the only element class that are not changing the data and
could lead to an infinite loop. Other element classes like demuxers,
e.g. id3demux, can be used multiple times in a row and sometimes are.
Previously we only checked against the raw caps but we should also
check against the return value of autoplug-continue. Additionally fix
a thread-safety issue with accessing the raw caps.
Add "source-setup" signal for convenience and discoverability. No need
to figure out "notify::source", look up the notify callback signature,
then do an g_object_get() to get the source element..
https://bugzilla.gnome.org/show_bug.cgi?id=626152
...instead of copying the array. Returning NULL will result
in the original factories array to be used and prevents a useless
array copy in most use cases.
...instead of copying the array. Returning NULL will result
in the original factories array to be used and prevents a useless
array copy in most use cases.
Add notes about the behaviour if multiple signal handlers are connected.
For most autoplug-* signals only the first signal handler will ever
be invoked.
Also add to the autoplug-sort docs that the signal handler can return NULL
to specify that the order should change and other handlers get the chance
to sort the array.
This lock is taken when activating a group, which could result in
calling the autoplug-continue callback, which also needs this lock
to access the sinks.
See bug #642174.
Don't build merge the caps of all sinks but check them one-by-one
until one supports the caps. Also get reffed caps from the sinkpads
instead of a writable copy and add debug output if a sink claims to
support ANY caps.
Some things aren't quite right yet and cause problems (0-sized buffers
with PREROLL flag set cause crashes in elements that don't expect those;
getting pipeline back to preroll/playing again when audio/video streams
have different lengths and a seek past the end of one of the stream
happens doesn't always work, etc.). Needs further investigation in the
next cycle.
https://bugzilla.gnome.org/show_bug.cgi?id=633700https://bugzilla.gnome.org/show_bug.cgi?id=634699
Fix a bug when reconfiguring the playsink where the subpicture
stream is broken by attempting to connect it through
streamsynchroniser and second time.
Advance stop times too when they are getting higher than the
stop time of segments, avoiding assertions.
The stop time has to be advanced too so that running time keep in sync
for gapless mode.
https://bugzilla.gnome.org/show_bug.cgi?id=631312
Where it was previously located, we would get async-done for the first
unknown-type, even if other valid streams would appear afterwards.
decode_bin_expose() will take care of posting async-done when the group
is exposed.
But we still want to post it in case the typefinding returned an unknown
type, in which case we will post it after posting an error.
These two changes ensure we do as much as possible before posting async-done.
That is, if eos is received which will not be forwarded, and the stream
has not yet seen any data, then send a buffer to preroll downstream
(which might otherwise be accomplished by the eos event).
Streamsynchronizer excepts to see stream-changed msg for all streams, but to
arrange for this, video and subtitle streams need to be decoupled by means
of queues (due to pad blocks that may occur).
Fixes#626463.
Specifically, as the latter may have one thread pushing EOS to several streams,
that needs to be decoupled into various thread to prevent preroll hanging
problems.
This fixes a race condition in playbin2's gapless mode, where the
EOS of other streams might arrive in the sinks before the last stream
ends and the switch to the new track happens. The EOS sinks won't
accept any new data then and playback stops.
To prevent this, delay all EOS events until all streams are EOS
and advance the sinks of the EOS streams by filler newsegment
events if necessary.
Fixes bug #625118.
Logic for choice of GST_PAD_LINK_CHECK_* is as follows:
* Where return of pad_link wasn't checked before : NOTHING
* Where linking is between known compatible elements : NOTHING
* All other cases : TEMPLATE_CAPS
Slashes down playsink reconfigure by up to 50% cpu time.
This makes sure that we always keep the display aspect ratio and
add black borders if necessary, which is usually something you want
for viewing a video.
Before gapless playback failed when switching between audio-only,
video-only and audio-video files, when choosing different clocks
and when the different streams had different durations.
This is now handled by a helper element, which keeps track of the
running times of all streams and synchronizes them.
Fixes bug #602437.
Fixes spurious errors that happen after an error and playing a working
stream afterwards or signals that are emitted for non-active groups.
Fixes bug #624266.
This reverts commit 9d7538247f.
If the DVD subpicture caps are not part of the raw caps, uridecodebin
doesn't qualify resindvdbin as raw source and plugs decodebins, which
causes broken DVD playback because of bugs elsewhere.
This change was originally added to only expose supported, raw subtitles,
e.g. if the subtitle sink did not support DVD subpictures but a converter
to some supported format exists. It's not very important right now because
we have nothing (that is autoplugged) to convert from plaintext/pango-markup
or DVD subpictures to something else.
Fixes bug #623583.
Otherwise the uridecodebin will be still a child of playbin2 and
its signals will still be connected. In future state changes this
will then emit unrelated signals that will confuse playbin2 or,
even worse, cause crashes and assertions.
Fixes bug #623318.
If an error happens, the PAUSED state will never be reached. If an
application re-uses decodebin2 (like totem) where one would normally
set to READY between each file, the cleanup that normally happens in
the PAUSED=>READY codepath will never be called, resulting in the
following file to re-use the previous demuxer/decoder/...
https://bugzilla.gnome.org/show_bug.cgi?id=622807
We need to clear the pointer to our ts-offset element when we destroy the video
chain elements to make sure nobody derefs it to invalid memory afterwards.
Otherwise we would end up with a bogus ->audiochain->ts_offset field
which would cause segfaults/assertions when trying to modify the
'ts-offset' property in update_av_offset().
Was easy to trigger when using a list of audio+video files mixed with
video-only files in totem.
Use the pad caps when they are available to continue the autoplugging. If the
pad caps are set, they are fixed and then we can directly continue autoplugging.
Use an accumulator for the autoplug-sort signal so that we can stop the emission
when a signal handler produced a valid result. This avoids the object handler
to overwrite the results from user signals.
Fixes#621161
Move the convert_frame function to playsink and make it part of the API. This is
in preparation to add the convert_frame signal to playsink.
See #620279
If a file contains raw streams (not requiring a decoder) that we do
not want (expose-all-streams == FALSE), we would previously consider
those of unknown-type (missing a decoder) ... whereas in fact it was just
because they don't need decoders.
This only applies if expose-all-streams is FALSE.
API : expose-all-streams
If disabled:
* only the streams that CAN be decoded and match the final caps will have a
decoder plugged in and be exposed.
* the streams that COULD HAVE BEEN decoded but do not match the finals caps
will not have a decoder plugged in and will not be exposed.
If no decoder is available to decode a certain stream, then the missing element
message will still be emitted regardless of the value of the property.
https://bugzilla.gnome.org/show_bug.cgi?id=617868
Unreffing it whenever the sinks are removed will make the volume
element unavailable after a playbin reuse because it is only
recreated if the audio sink has changed.
Fixes bug #614288.
Change playbin2 to not error out if there are subtitles and audio
but no video. If visualizations are enabled the subtitles are rendered on top
of the visualization stream, otherwise the subtitles are not linked at all and
only the audio is played (and a warning message is posted).
If there are only subtitles but neither audio nor video an error message is
still posted.
Fixes bug #610866.
For this add subtitle encoding properties to playsink and subtitleoverlay
and update the values in the containing elements.
Also update the font description in textoverlay or the used renderer
element if it is changed during playback.
Fixes bug #610310.
Use the same translated message string for missing core elements as
playbin uses, which is a bit nicer and also indicates that there is
something wrong with the user's GStreamer installation (which arguably
is the case if elements like typefind or queue2 are missing).
Otherwise the ghostpad will still be linked to the peer and there
will still be a reference kept, leading to nothing being unlinked
and destroyed until decodebin2 is finalized.
This fixes reuse of decodebin2 if a raw stream is connected to
its sinkpad.
This makes sure that we don't destroy the last reference before the
element gets back to NULL state. Fixes assertion failures if a playbin2
instance is reused but different sinks are automatically chosen because
of different caps.
This reverts commit 7335ce5d3e.
Support abusing the uri property to configure the next uri to play
outside of the about-to-finish handler for the time being after all.
We also shouldn't use thread private structures for this, since it
should be possible to block the thread that emitted about-to-finish
while the main thread sets the uri property. See #607226.
When reusing a decodebin2 element, clear the properties we might have changed,
to their default values or else we might end up with old configuration.
Fixes#608484
When we are dealing with a source that produces raw audio/video, we don't use a
decodebin2 to decode the data and we thus don't have the drained/about-to-finish
signal emited. To fix this, we add a padprobe on the source pads and emit the
drained signal ourselves. This then makes playbin2 emit the about-to-finish
signal for raw sources such as cdda://
Fixes#607116
We don't want to end up setting values on elements where the property is of
a different type than we expect. Can't transform the value either, since we
can't really make assumptions about the scale and transform function.
Fixes crashes when using playbin2 with apexsink (#606949).
Changing the URIs in a state > READY results in unexpected behaviour,
i.e. the new URIs are only used after the current track has finished.
Fixes bug #607226.
In this case the video still goes through the text chain and
subtitles are still going in there, in case subtitles are
enabled again. This makes sure that re-enabling subtitles
happens instantly.
Fixes hanging video when disabling subtitles, caused by an
unliked video pad.
This is necessary because the sinks don't notice the group switches
and the decoders/demuxers have a different running time than the
sinks.
Fixes bug #537050.
In some cases (all buffers dropped by a parser) a decodebin2
chain might receive an EOS before it gets enough data to
expose a decoded pad. In the case that no streams can expose
a pad we should error out instead of hang.
Fixes#542758
Just counting how many messages were sent and how many were received
is not good enough because they might've been duplicated (e.g. by the
visualization audio tee). Comparing the sequence numbers should give
better results in that case.
Otherwise the async state change from READY->PAUSED of the
uridecodebins will take playbin2 from PLAYING->PAUSED again
during gapless group switches.
Fixes bug #602000.
When a decodebin2 receives no-more-pads of a group it
can set that group's multiqueue buffering thresholds to
'playing' buffering method, avoiding that it buffers
too long and cause problems when using with queue2.
See the associated bug for details.
Fixes#600787
During a group switch return the cached duration of the old group
because the old group still didn't finish playback. If we have no
cached duration return FALSE.
Fixes bug #585969.
Make sure, to only "simulate" subtitle no-more-pads if it was still
pending and also handle errors in the subtitle pipeline as warnings
after the subtitles prerolled.
Don't set the suburidecodebin to READY after errors, handle_message
will usually be called from the streaming thread and doing that
from there is obviously not a good idea.
Now the caps property isn't set anymore for the subtitle caps
but instead in the autoplug-continue signal it is detected
if the caps belong to a supported subtitle stream.
This makes automatic use of newly installed plugins.
First of all, make sure that suburidecodebin never
errors out because of not-linked in case external subtitles
are used but then subtitles are disabled.
And then make sure that external subtitles always start from
the correct position and are not racing until EOS if they
get unselected and selected again.
This will make sure that no subparse is ever plugged and subtitleoverlay,
that subpicture streams are handled the same was as subtitles and that
subtitle renderers are used if available.
Fixes bugs #595123, #570753, #591662, #591706.
Using the object lock here can and will lead to deadlocks because
of deep-notifies of property changes: the deep-notify handler will
get the parent of objects, which will take the object lock again.
Fixes bug #600479.
Use the faster gst_element_link_pads because we know for sure the sinkpad name
and we don't need to have the function search for a suitable pad anymore.
We want to return NOT_LINKED for unselected pads but only for pads
from the normal uridecodebin. This makes sure that subtitle streams
are not raced past audio/video from decodebin2's multiqueue.
For pads from suburidecodebin OK should always be returned, otherwise
it will most likely stop with an error.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
Set the output caps on the srcpad before pushing the buffer because else core
will do a rather expensive check to see if we can actually accept those caps on
the srcpad.
Install a custom acceptcaps function instead of using the default expensive
check. We accept whatever downstream accepts so we pass along the acceptcaps
call to the downstream peer.
