According to the HLS spec the remainder of the line following
the comma on EXTINF tag is not required. This patch removes
the fake title and saves some bytes on the playlist.
https://bugzilla.gnome.org/show_bug.cgi?id=741096
A context can create a GLsync object that can be waited on in order
to ensure that GL resources created in one context are able to be
used in another shared context without any chance of reading invalid
data.
This meta would be placed on buffers that are known to cross from
one context to another. The receiving element would then wait
on the sync object to ensure that the data to be used is complete.
This gives more flexibility to the subclasses and permits to remove the
GstVideoAggregatorClass->disable_frame_conversion ugly API.
WARNING: This breaks the API as it removes the disable_frame_conversion
field
API:
+ GstVideoAggregatorClass->find_best_format
+ GstVideoAggregatorPadClass->set_format
+ GstVideoAggregatorPadClass->prepare_frame
+ GstVideoAggregatorPadClass->clean_frame
- GstVideoAggregatorClass->disable_frame_conversion
https://bugzilla.gnome.org/show_bug.cgi?id=740768
If we seek when media is in stop state, playback-test gives
critical error, since context of glimagesink is destroyed during stop.
But since context is not present, we need not handle send_event in glimagesink
Hence adding a condition to check if context is valid.
https://bugzilla.gnome.org/show_bug.cgi?id=740305
Otherwise e.g. videotestsrc ! openh264enc ! ... will drop every second frame
because otherwise the target bitrate can't be reached without loosing too
much quality.
gst_glimage_sink_handle_events can be called from the overlay interface and from
the main thread before GL is setup. Before this change, that would call
_ensure_gl_setup() and deadlock on OSX.
Change things so that it's always safe to call gst_glimage_sink_handle_events()
without stuff deadlocking.
Remove gst_glimage_sink_handle_events call in gst_glimage_sink_init. It was
unnecessary and when the element was instantiated from the main thread, caused a
deadlock in OSX creating the context (thread).
Both Firefox and Chrome uses OPUS as the encoding in their SDP.
Adding this now defacto standard name remove the need for special
case in SDP parsing code.
https://bugzilla.gnome.org/show_bug.cgi?id=737810
with force-aspect-ratio=true, if the width or height changed, the
viewport wasn't being updated to respect the new video width and height
until a resize occured.
Otherwise, it is only possible for the sink pads and the src pads to
have the exact same caps features. We can convert from any feature
to another feature so support that.
Otherwise, it is only possible for the sink pads and the src pads to
have the exact same caps features. We can convert from any feature
to another feature so support that.
Do not try to render a buffer that is already being rendered.
This happens typically during the initial rendering stage as the first
buffer is rendered twice: first by preroll(), then by render().
This commit avoids this assertion failure:
CRITICAL: gst_wayland_compositor_acquire_buffer: assertion
'meta->used_by_compositor == FALSE' failed
https://bugzilla.gnome.org/show_bug.cgi?id=738069
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
If waylandsink is the owner of the display then it is in charge
of catching input events on the surface.
https://bugzilla.gnome.org/show_bug.cgi?id=733682
Signed-off-by: Tifaine Inguere <tifaine.inguere@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
There are two cases covered here:
1) The GstWlDisplay forces the release of the last buffer and the pool
gets destroyed in this context, which means it unregisters all the
other buffers from the GstWlDisplay as well and the display->buffers
hash table gets corrupted because it is iterating.
2) The pool and its buffers get destroyed concurrently from another
thread while GstWlDisplay is finalizing and many things get corrupted.
The main reason behind this is that when the video caps change and the video
subsurface needs to resize and change position, the wl_subsurface.set_position
call needs a commit in its parent in order to take effect. Previously,
the parent was the application's surface, over which there is no control.
Now, the parent is inside the sink, so we can commit it and change size smoothly.
As a side effect, this also allows the sink to draw its black borders on
its own, without the need for the application to do that. And another side
effect is that this can now allow resizing the sink when it is in top-level
mode and have it respect the aspect ratio.
Because we no longer have a custom buffer pool that holds a reference
to the display, there is no way for a cyclic reference to happen like
before, so we no longer need to explicitly call a function from the
display to release the wl_buffers.
However, the general mechanism of registering buffers to the display
and forcibly releasing them when the display is destroyed is still
needed to avoid potential memory leaks. The comment in wlbuffer.c
is updated to reflect the current situation.
This reduces the complexity of having a custom buffer pool, as
we don't really need it. We only need the custom allocation part.
And since the wl_buffer is no longer saved in a GstMeta, we can
create it and add it on the buffers in the sink's render()
function, which removes the reference cycle caused by the pool
holding a reference to the display and also allows more generic
scenarios (the allocator being used in another pool, or buffers
being allocated without a pool [if anything stupid does that]).
This commit also simplifies the propose_allocation() function,
which doesn't really need to do all these complicated checks,
since there is always a correct buffer pool available, created
in set_caps().
The other side effect of this commit is that a new wl_shm_pool
is now created for every GstMemory, which means that we use
as much shm memory as we actually need and no more. Previously,
the created wl_shm_pool would allocate space for 15 buffers, no
matter if they were being used or not.
This also removes the GstWlMeta and adds a wrapper class for wl_buffer
which is saved in the GstBuffer qdata instead of being a GstMeta.
The motivation behind this is mainly to allow attaching wl_buffers on
GstBuffers that have not been allocated inside the GstWaylandBufferPool,
so that if for example an upstream element is sending us a buffer
from a different pool, which however does not need to be copied
to a buffer from our pool because it may be a hardware buffer
(hello dmabuf!), we can create a wl_buffer directly from it and first,
attach it on it so that we don't have to re-create a wl_buffer every
time the same GstBuffer arrives and second, force the whole mechanism
for keeping the buffer out of the pool until there is a wl_buffer::release
on that foreign GstBuffer.
Header will be read each and everytime parse function will be called
which is not necessary since until we have complete data,
we need not parse the header again.
https://bugzilla.gnome.org/show_bug.cgi?id=737984
In gst_hls_demux_get_next_fragment() the next fragment URI gets
stored in next_fragment_uri, but the gst_hls_demux_updates_loop()
can at any time update the playlist, rendering this string invalid.
Therefore, any data (like key, iv, URIs) that is taken from a
GstM3U8Client needs to be copied. In addition, accessing the
internals of a GstM3U8Client requires locking.
https://bugzilla.gnome.org/show_bug.cgi?id=737793
As openh264 has no way to attach any IDs to input frames that we then get on
the output frames, we have to assume that the input has valid PTS. We just
take the frame with the oldest PTS, and if there is no PTS information we take
the one with the oldest DTS.
- update for shaders
- add alpha property
- image placement properties shamelessly borrowed from gdkpixbufoverlay
- image placement properties are GstController able
- use GstGLMemory for the overlay image data
- add support for gles2
Otherwise we could pass on a RGBA formatted buffer and downstream would
misinterpret that as some other video format.
Fixes pipelines of the form
gleffects ! tee ! xvimagesink
Allows callers to properly reference count the buffers used for
rendering.
Fixes a redraw race in glimagesink where the previous buffer
(the one used for redraw operations) is freed as soon as the next
buffer is uploaded.
1. glimagesink uploads in _prepare() to texture n
1.1 glupload holds buffer n
2. glimagesink _render()s texture n
3. glimagesink uploads texture n+1
3.1 glupload free previous buffer which deletes texture n
3.2 glupload holds buffer n+1
4. glwindow resize/expose
5. glimagesink redraws with texture n
The race is that the buffer n (the one used for redrawing) is freed as soon as
the buffer n+1 arrives. There could be any amount of time and number of
redraws between this event and when buffer n+1 is actually rendered and thus
replaces buffer n as the redraw source.
https://bugzilla.gnome.org/show_bug.cgi?id=736740
If EOS or ERROR happens before the download loop thread has reached its
g_cond_wait() call, then the g_cond_signal doesn't have any effect and
the download loop thread stucks later.
https://bugzilla.gnome.org/show_bug.cgi?id=735663
If EOS or ERROR happens before the download loop thread has reached its
g_cond_wait() call, then the g_cond_signal doesn't have any effect and
the download loop thread stucks later.
https://bugzilla.gnome.org/show_bug.cgi?id=735663
If EOS or ERROR happens before the download loop thread has reached its
g_cond_wait() call, then the g_cond_signal doesn't have any effect and
the download loop thread stucks later.
https://bugzilla.gnome.org/show_bug.cgi?id=735663
The internal pad still keeps its EOS flag and event as it can be assigned
after the flush-start/stop pair is sent. The EOS is assigned from the streaming
thread so this is racy.
To be sure to clear it, it has to be done after setting the source to READY to
be sure that its streaming thread isn't running.
https://bugzilla.gnome.org/show_bug.cgi?id=736012
The internal pad still keeps its EOS flag and event as it can be assigned
after the flush-start/stop pair is sent. The EOS is assigned from the streaming
thread so this is racy.
To be sure to clear it, it has to be done after setting the source to READY to
be sure that its streaming thread isn't running.
https://bugzilla.gnome.org/show_bug.cgi?id=736012
The internal pad still keeps its EOS flag and event as it can be assigned
after the flush-start/stop pair is sent. The EOS is assigned from the streaming
thread so this is racy.
To be sure to clear it, it has to be done after setting the source to READY to
be sure that its streaming thread isn't running.
https://bugzilla.gnome.org/show_bug.cgi?id=736012
packetized mode is being set when framerate is being set
which is not correct. Changing the same by checking the
input segement format. If input segment is in TIME it is
Packetized, and if it is in BYTES it is not.
https://bugzilla.gnome.org/show_bug.cgi?id=736252
Previously we only refetched the playlist if downloading a fragment
has failed once. We should also do that if it failed a second or third time,
chances are that the playlist was updated now and contains new URIs.
face detection will be performed only if image standard deviation is
greater that min-stddev. Default min-stddev is 0 for backward
compatibility. This property will avoid to perform face detection on
images with little changes improving cpu usage and reducing false
positives
https://bugzilla.gnome.org/show_bug.cgi?id=730510
* aspect should not be 0 on init
* rename fovy to fov
* add mvp to properties as boxed graphene type
* fix transformation order. scale first
* clear color with 1.0 alpha
https://bugzilla.gnome.org/show_bug.cgi?id=734223
If the language is not specified in the AdaptationSet, use the ContentComponent
node to get it. We only get it if there is only a single ContentComponent as
it doesn't seem clear on what to do if there are multiple entries
https://bugzilla.gnome.org/show_bug.cgi?id=732237
Dynamic pipelines that get and release the sink pads will finalize
the pad without going through gst_gl_mixer_stop() which is where the
upload object is usually freed. Don't leak objects in such case.
Instead always use the low bandwith playlist making things go smoother
as the current heuristic is rather set for normal playback, and
currently it does not behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=734445
When a seek with a negative rate is requested, find the target
segment where gstsegment.stop belongs in and then download from
this segment backwards until the first segment.
This allows proper reverse playback.
If window is resized, GstStructure pointer values have to be rescaled to
original geometry. A get_surface_dimensions GLWindow class method is added for
this purpose and used in the navigation send_event function.
https://bugzilla.gnome.org/show_bug.cgi?id=703486
When flushing, this will prevent dashdemux from trying to download more
fragments or more chunks of the same fragment before stopping.
Also improves the error handling to not transform everything non-ok into
an error.
https://bugzilla.gnome.org/show_bug.cgi?id=734014
templatematch operates on BGR data. In fact, OpenCV's IplImage always
stores color image data in BGR order -- this isn't documented at all in
the OpenCV source code, but there are hints around the web (see for
example
http://www.cs.iit.edu/~agam/cs512/lect-notes/opencv-intro/opencv-intro.html#SECTION00041000000000000000
and http://www.comp.leeds.ac.uk/vision/opencv/iplimage.html ).
gst_templatematch_load_template loads the template (the image to find)
from disk using OpenCV's cvLoadImage, so it is stored in an IplImage in
BGR order. But in gst_templatematch_chain, no OpenCV conversion
functions are used: the imageData pointer of the IplImage for the video
frame (the image to search in) is just set to point to the raw buffer
data. Without this fix, that raw data is in RGB order, so the call to
cvMatchTemplate ends up comparing the template's Blue channel against
the frame's Red channel, producing very poor results.
Previously changing the template property resulted in an exception
thrown from cvMatchTemplate, because "dist_image" (the intermediate
match-certainty-distribution) was the wrong size (because the
template image size had changed).
Locking has also been added to allow changing the properties (e.g. the
pattern to match) while the pipeline is playing.
* gst_element_post_message is moved outside of the lock, because it will
call into arbitrary user code (otherwise, if that user code calls into
gst_templatematch_set_property on this same thread it would deadlock).
* gst_template_match_load_template: If we fail to load the new template
we still unload the previous template, so this element becomes a no-op
in the pipeline. The alternative would be to keep the previous template;
I believe unloading the previous template is a better choice, because it
is consistent with the state this element would be in if it fails to
load the very first template at start-up.
Thanks to Will Manley for the bulk of this work; any errors are probably
mine.
The early return was bypassing the call to gst_pad_push. With no
filter->template (and thus no filter->cvTemplateImage) the rest of this
function is essentially a no-op (except for the call to gst_pad_push).
This (plus the previous commit) allows templatematch to be
enabled/disabled without removing it entirely from the pipeline, by
setting/unsetting the template property.
Delaying the segment event to when caps are decided can cause issues as
the first thing katedec does on its chain function it doing a segment clip.
It will lead to an assertion if the segment format is undefined
https://bugzilla.gnome.org/show_bug.cgi?id=733226
Properly handle the caps event by configuring the kate decoding lib using the
available streamheaders. This makes it possible to decode kate subtitles when
the stream is seeked before katedec gets the initial buffers that are usually
the streamheaders.
https://bugzilla.gnome.org/show_bug.cgi?id=733226
