I'm going to use this new API in gst-omx so an encoder can request
v4l2src to produce buffers matching the encoder stride and slice heights
preventing copies of incoming buffers.
Especially for interlaced input make sure to
a) never mix both fields
b) never read lines after the end of the input frame
c) allocate enough space in the temporary lines to not write outside
the allocated memory area
This fixes various memory corruptions and rescaling artefacts.
At the moment, we only posted QoS messages when frame_drop() was
called, but not in finish_frame() when QoS triggered a late push.
This should fix applications that tries to account the dropped
frames. We also emit a warning on drops so it's more clear what is
happening.
By adding this field, buffer producers can now explicitly set the exact
geometry of planes, allowing users to easily know the padded size and
height of each plane.
GstVideoMeta is always heap allocated by GStreamer itself so we can
safely extend it.
When using gst_video_info_align() user had no easy way to retrieve the
padded size and height of each plane.
This can easily be implemented in fill_planes() as it's already called
in align() with the padded height.
Ideally we'd add a plane_size field to GstVideoInfo but the remaining
padding is too small so that would be an ABI break.
Fix#618
We want to round up when halfing height.
I do have a test for this but it relies on my new video-align tests so
it's part of the next commit. Recording the fix separately if we want to
backport this fix to the stable branch.
Similar to gst_video_info_from_caps() which allows encoded video format,
don't error gst_audio_info_from_caps() with encoded audio format.
Because gst_audio_info_set_format() supports encoded format, current
behavior does not seem to be consistent.
We need to provide twice as many lines as usual to the scaling function
as every second lines would be skipped.
Without this we read from random memory and produce colorful output and
crashes.
Without this, scaling e.g. interlaced UYVY causes corrupted output with
lines as follows: f1 f1 f2 f2, i.e. two lines of each field and only
then the other field.
The watch->messages_bytes is not decreased when the write operation
from the backlog is only partly successfull.
This commit decreases the watch->messages_bytes for the successfully
sent messages.
Fixes#679
Y210 is a 10-bit YUY2, so we may re-use the YUY2 shaders but gl format
is set to RG16
Sample pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw,format=Y210 ! glimagesink
NV16/NV61 is basically the same as NV12/NV21 with a higher chroma resolution.
Since only the size of the UV plane/texture is different, the same shaders are used as for NV12/NV21.
This is done by reusing `gst_gl_memory_setup_buffer` avoiding to
duplicate code.
Without a VideoMeta, mapping those buffers lead to GstBuffer mapping the
buffer in system memory even when specifying the GL flags (through the
buffer merging mechanism) making the result totally broken.
The newly exposed vmethods are pause, resume, stop and clear_all.
The existing reset vmethod is deprecated.
The audio sink will fallback to calling reset if pause or stop
are not provided and will fallback to calling start if
resume is not provided. There is no default clear_all
implementation.
Existing audio sinks continue to work as before.
This change is useful for sinks that need to distinguish
between a pause and a stop (currently both are handled
by a reset) and is needed for https://bugzilla.gnome.org/show_bug.cgi?id=788362https://bugzilla.gnome.org/show_bug.cgi?id=788361
Universal Windows Platform apps are not allowed to use LoadLibrary to
load arbitrary DLLs from the filesystem. They can only use
LoadPackagedLibrary to load DLLs that have been packaged with the app
as assets.
See also: https://gitlab.freedesktop.org/gstreamer/gstreamer/merge_requests/190
If the remainder is not evenly divisable by 4, we'd miss the check
for zero and continue the loop until crashing. Change the branch
to take into account negatives as well.
This more closely matches the SSE loop.
We are using ARC to cleanup after ourselves.
../gst-libs/gst/gl/cocoa/gstglwindow_cocoa.m:159:20: error: unused variable 'queue' [-Werror,-Wunused-variable]
dispatch_queue_t queue = (__bridge_transfer dispatch_queue_t) window->priv->gl_queue;
^
Matroskademux will send gap event when lag of video and audio is over 3 seconds.
audiodecoder needs to handle gap event and set default output caps.
Only audio info is set, while output caps is ignored. This cause the assertion failed.
Need to fill output caps in gst_audio_decoder_negotiate_default_caps() with
negotiated caps to avoid critical info printed when check it later.
This is needed for using GstGL with ANGLE as the GLES implementation
in Universal Windows Platform apps that use the Windows Runtime
(WinRT) instead of Win32, which is deprecated and not allowed in
Windows Store apps.
This has been tested with Servo on the Microsoft HoloLens 2, and seems
to work quite well.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
Simple addition for supporting EXT_platform_device typed display.
It's a kind of special display type (part of EGL specification)
which has no window at all.
To use EGLDevice explicitly, set environment "GST_GL_WINDOW=egl-device"
See also https://www.khronos.org/registry/EGL/extensions/EXT/EGL_EXT_platform_device.txt
* Fix typo
s/nunormalized/normalized/g
* Update GstVideoMasteringDisplayInfo description
Each values are not array.
* Add missing newline between arguments description and
detailed comment.
The gltestsrc element was refactored to inherit from this base class which
handles the GL context. The sub-class only needs to implement the gl_start,
gl_stop and fill_gl_memory vfuncs, along with properly advertizing the GL APIs
it supports through the supported_gl_api GstGLBaseSrc class attribute.
The caps and thus the video info have preference. If the field order is
set in there then it applies to all frames.
This works around issues where the tff field order is only set in the
caps but not additionally in the buffer flags.
Commit c71dd72b "gl/wayland: fix glib mainloop integration" was overeager
in removing the poll result test from the check function. This caused
dispatch to be called even if no new events are available on the
Wayland connection, which in turn would wake up the glib mainloop,
causing effectively a tight loop without ever blocking on the poll.
Fixes#603
basedepayload generates its own segment in a pretty unconventional
manner, relying on information in the caps such as npt-start or
npt-stop, usually set by rtspsrc.
In ONVIF mode, rtspsrc will generate the correct segment and this
logic in rtpbasedepayload will not be needed, this commit allows
rtspsrc to signal that through the caps.
While we can convert between all formats apart from the rate, we
actually need to make sure that we comply with a) the rate of the first
configured pad and b) also all the allowed rates from downstream.
We were previously only fixating the rate in the getcaps
implementation when downstream was requiring a discrete value,
causing negotiation to fail when upstream was capable of rate
conversion, but not made aware that it had to occur.
Instead of fixating the rate, we can simply update our sink
template caps with whatever GValue the downstream caps are holding
as their rate field.
Allows negotiation to successfully complete with pipelines such as:
audiotestsrc ! audio/x-raw, rate=48000 ! audioresample ! audiomixer name=m ! \
audio/x-raw, rate={800, 1000} ! autoaudiosink \
audiotestsrc ! audio/x-raw, rate=44100 ! audioresample ! m.
... and also as known as ITU-T H.273.
The conversion has been handled per plugin for now. That causes
code duplication a lot also some plugins might not be updated with newly introduced
color{matrix,transfer,primaries} enum value(s).
Instead of handling it per plugin, centralized handling can remove such
code duplication and make plugins be up-to-dated.
The extmap attribute allows mapping RTP extension header IDs to
well-known RTP extension header specifications. See RFC8285 for details.
We store the extmap attribute either as string in the caps
extmap-X=extensionname
where X is the integer extension header ID, or as 3-tuple of strings
extmap-X=<direction,extensionname,extensionattributes>
where direction or extensionattributes are allowed to be the empty
string.
Both formats are allowed because usually only the extension name is
given and it's much simpler to handle in caps.
We use this property in gst_gl_display_egl_from_gl_display, to set
foreign_display for the new GstGLDisplayEGL instance. This fixes a
problem where gst_gl_display_egl_finalize calls EglTerminate on a
pre-existing EGL connection.
It seems that eglCreatePlatformWindowSurfaceEXT is failing (with
EGL_BAD_ALLOC) because it thinks an EGL surface has already been created
for the wl_egl_window. The reason is that the "driver_private" field of
the wl_egl_window is getting clobbered by the function
wl_proxy_set_queue().
Since a wl_egl_window is not a wl_proxy, it shouldn't be passed to
wl_proxy_set_queue(). It just wraps a wl_surface (which is a wl_proxy).
And it looks like the queue for that surface is getting set earlier on
in the function anyway.
See https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/issues/621#note_184582
Body_offset mean that so much data have been written.
Without this patch n_vectors somtimes becomes one more than it should
and then there will be an vector that have a random size causing
writev_bytes to cause a "Bad address" error.
This patch fixes the following critical warning:
CRITICAL **: 11:33:32.843: Unknown GL format 0x0 provided
It would happen during the setup of a second pipeline involving the DMABuf
uploader, typically with a v4l2src element. The warning was raised because the
uploader had a cached EGLImage already filled but the formats were not
synchronized accordingly.
The "field-order" is related for all interlace_mode modes except the
"progressive" mode. So instead of or'ing each mode we can use the
already supported GST_VIDEO_INFO_IS_INTERLACED macro.
This makes a pipeline below works:
little endian:
gst-launch-1.0 videotestsrc ! video/x-raw,format=P010_10LE ! glimagesink
big endian:
gst-launch-1.0 videotestsrc ! video/x-raw,format=P010_10BE ! glimagesink
gst_meta_api_type_register() assumes that the last tags element is null, but it wasn't
==17422==ERROR: AddressSanitizer: global-buffer-overflow on address 0x7f4e2a67c998 at pc 0x7f4e2a0c92ac bp 0x7ffcc41f80b0 sp 0x7ffcc41f80a0
READ of size 8 at 0x7f4e2a67c998 thread T0
#0 0x7f4e2a0c92ab in gst_meta_api_type_register ../subprojects/gstreamer/gst/gstmeta.c:94
#1 0x7f4e2a5582c3 in gst_video_afd_meta_api_get_type ../subprojects/gst-plugins-base/gst-libs/gst/video/video-anc.c:1146
#2 0x404c7c in invoke_get_type (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x404c7c)
#3 0x406b5c in dump_irepository (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x406b5c)
#4 0x407089 in main (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x407089)
#5 0x7f4e295b4b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
#6 0x404479 in _start (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x404479)
0x7f4e2a67c998 is located 40 bytes to the left of global variable 'tags' defined in '../subprojects/gst-plugins-base/gst-libs/gst/video/video-anc.c:1232:25' (0x7f4e2a67c9c0) of size 24
0x7f4e2a67c998 is located 0 bytes to the right of global variable 'tags' defined in '../subprojects/gst-plugins-base/gst-libs/gst/video/video-anc.c:1141:25' (0x7f4e2a67c980) of size 24
SUMMARY: AddressSanitizer: global-buffer-overflow ../subprojects/gstreamer/gst/gstmeta.c:94 in gst_meta_api_type_register
Add max-reorder property to make the old hard coded reordering limit of
100 configurable. It's particularly useful in some scenarios to set
max-reorder=0 to disable the behavior that the depayloader will drop
packets.
Note that although the default value is 100, the default limit has
increased with one because of the changed if-test. This was done to
allow the max-reorder value to be more intuitive. See tests.
Instead of checking if the requested GL API is GLES2 (because ANY can
be set) the string is matched with the GLES2 prefix, and if so, then
the string is offset.
RFC 7826 recommends (but does not require) starting at 0,
but at least one known server implementation fails to copy
request sequence numbers <1 into responses due to an
incorrect null check.
The server known to exhibit this behavior is the Parrot
Streaming Server, serving video from their UAV devices.
A fix has been submitted upstream as well:
https://github.com/Parrot-Developers/librtsp/pull/2
The Parrot developers are known to have tested with LibVLC.
In WireShark debugging, LibVLC appears to start with a CSeq
of 2, which is likely why this bug went unnoticed.
This reverts 487595a7d6, which set this to 0 citing the
RFC. The switch to 0 was thus a recent one; it's therefore
possible server implementors relied on the previous
GStreamer client behavior in their tests as well.
Fixes#624.
Since we started depending on GLib 2.44, we can be sure this macro is
defined (it will be a no-op on compilers that don't support it). For
plugins we should just start using `G_DECLARE_FINAL_TYPE` which means we
no longer need the macro there, but for most types in base/gst-libs we
don't want to break ABI, which means it's better to just keep it like it
is (and use the `#ifdef` instead).
The problem is that Gobject Introspections does not understand the const
gfloat matrix[16] as an matrix but as an array of gfloasts but as just
one gfloat.
To fix this i added the annotation to the parameter
descriptions.
