Add pitch tests with different forward and backward playback rates.
Those tests depend on the libSoundTouch version to validate the buffers
checksums. The actual version uses libSoundTouch 2.3.2, use the
`--force-fallback-for=soundtouch` meson option to build using the same
version.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- fully protect accesses to the libsoundtouch API that is not
thread-safe.
- fully protect accesses to GstPitch members that could be read by a
downstream query thread while written by an upstream streaming thread
or a user thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- use the `GST_PITCH_GET_PRIVATE` accessor when needed
- rename `out_seg_rate` to `output_rate` to use the same name as the parameter
- rename `seg_arate` to `segment_applied_rate` to improve readability
- apply gst-indent to gstpitch.hh/cc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
When changing playing rate, the output segment was not correctly
calculated because the stream time ratio was computed using the previous
input segment rate instead of using the actual rate. This was producing
wrong results for the output segment start and end values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
The h26xdecoder 'stop' method was not called
as the vulkan h26x class rewires the video decoder
'stop' base method to its own one.
It was causing some memory leaks such as dangling parser
and dpb in h26xdecoder base class.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6782>
Modifying the `avoid-reencoding` property of `encodebin` could potentially cause
it to reconfigure itself, in which case the source pad will be removed and then
re-added.
Therefore set that property *before* attempting to link to that pad.
Fixes smart-render
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6757>
when pipline is
glvideomixerelement->glcolorconvertelement->gldownloadelement and
glcolorconvertelement is not passthrough, the gl bufferpool between
glvideomixerelement and glcolorconvertelement will not add gl sync meta
during allocating buffer. This will cause that glcolorconvert's inbuf
has no sync meta to wait for.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6756>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
Fixing deadlock in below case
* GC lock is taken by background thread, and the background thread calls
gst_d3d12_ipc_client_release_imported_data() which takes ipc lock
* ipc lock is already taken in ipc thread and trying to pushing GC data
via gst_d3d12_command_queue_set_notify()
* gst_d3d12_command_queue_set_notify() is trying to take GC lock
but it's already taken by background thread
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Ideally, GPU waiting should be scheduled just before executing command list.
But handling the case outside of converter is a bit complicated.
Under an assumption that constructed command list will be executed
immediately, schedules GPU-side waiting inside of conversion method
to simplify the flow.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Neither LIBDIR nor LIBPL are set with the native windows Python
(unlike MSYS2), so we need to use `prefix` which takes us to the
rootdir of the Python installation.
The name is also different: it's python312.dll, not python3.12.dll.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6734>
`python.get_variable('FOO', [])` becomes `python.get_variable('FOO')`
due to how Meson treats empty arrays in arguments, which breaks the
fallback feature of get_variable().
So we need to actually check whether the variable exists before trying
to fetch it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6734>
Since we don't want to expose video decoding API outside of GStreamer, the
header is removed from installation and both source files are renamed as
-private.
The header must remain in gst-libs because is referred by GstVulkanQueue,
which's the decoder factory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6723>
First it derived mapping was disabled for P010 formats, but also there's an
issue with interlaced frames.
It would be possible to disable derived mapping only for interlaced (H.264
decoder and vadeinterlace) but it would spread the hacks along the code. It's
simpler and contained to disable derived completely for Mesa <23.3
Fixes: #3450
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6729>
Instead of duplicating the GStreamer format to DRM fourcc mapping, this patch
uses the GstVideo library helpers. This duplicates the big O of looking for,
since the two lists are traversed, but it's less error prone.
Partially reverts commit 547f3e8622.
Fixes: #3354
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6731>
The assertion that was present before is a bit too harsh, since there is now
a (understandable) use-case where this could happen.
In gapless use-case, with two files containing the same type (ex:audio). The
first one *does* expose a collection with an audio stream, but decoding
fails (for whatever reason).
That would cause us to have configured a audio combiner, which was never
used (i.e. not active).
Then the second file plays and we (wrongly) assume it should be activated
... whereas the combiner was indeed present.
Demote the assertion to a warning and properly handle it
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3389
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6737>
If waylandsink received buffer rate is high which causes frame
drop, the cached staged buffer will be replaced when next buffer
needs to be rendered and be freed after redraw. But there is
chance to get memory leak if ended without redraw. So need to
free staged buffer when do gst_wl_window_finalize().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6670>
`rsvg_handle_get_dimensions()` and `rsvg_handle_render_cairo()` are
deprecated, and the replacement librsvg functions as specified in the
migration guide are `rsvg_handle_get_intrinsic_size_in_pixels()` and
`rsvg_handle_render_document()`.
However, those are not drop-in replacements, and actually have
breaking semantics for our use-case:
1. `intrinsic_size_in_pixels()` requires SVGs to have width+height or
the viewBox attribute, but `get_dimensions()` does not. It will
calculate the geometry based on element extents recursively.
2. `render_cairo()` simply renders the SVG at its intrinsic size on
the specified surface starting at the top-left, maintaining
whatever transformations have been applied to the cairo surface,
including distorted aspect ratio.
However, `render_document()` does not do that, it is specifically
for rendering at the specified aspect ratio inside the specified
viewport, and if you specify a viewPort that does not match the
aspect ratio of the SVG, librsvg will center it.
Matching the old behaviour with the new APIs is a lot of work for no
benefit. We'd be duplicating code that is already there in librsvg in
one case and undoing work that librsvg is doing in the other case.
The aspect ratio handling in this element is also kinda atrocious.
There is no option to scale the SVG while maintaining the aspect
ratio. Overall, element needs a rewrite.
Let's just disable deprecations. The API is not going anywhere.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6726>
There was an issue with this equality check, which was to figure out what to do
with PCR pids (whether they were part of the streams present or not) and whether
we ignore PCR or not.
Turns out ... we already took care of that further up in the function.
The length check can be simplified by just checking whether the length of
the *original* PMT and the new PMT are identical. Since we don't store "magic"
PCR streams in those, we can just use them as-is.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6713>
Set as much information as possible on the slot (including the associated
track) *before* the associated source pad is added to the element.
We need this so that incoming event/queries can be replied to if they are
received when adding the pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6690>
An application that triggers a state transition from PLAYING to PAUSED
needs to acquire the LIVE_LOCK. Consequently the LIVE_LOCK must not be
taken while pushing anything on the pads because this operation might
get blocked by something that cannot be unblocked without the
application being able to proceed with the state transitions for other
elements in the pipeline. This commit extends the previous behaviour
where the live lock was released before pushing buffers (indirectly
through the unlock before subclass->create) to now also include
unlocking before pushing events.
The issue was discovered in a case for WebRTC where the application
tried to shut down a pipeline but an event originating from a video
source element (based on basesrc) was in the process of being pushed
down the pipeline when it got stuck on the STREAM_LOCK for the pad after
the rtpgccbwe element. This lock in turn was held by the rtcpgccbwe
element as it was in the process of pushing data down the pipeline but
was stuck on the blocking probes installed on dtlssrtpenc to prevent
data from flowing before dtls keys had been negotiated. What should have
happened here is that the blocking probes should be removed, but that
can only happen if the application may continue driving the state
transitions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6671>
A DPB buffer held by codec picture object may not be writable
at the moment, then gst_buffer_make_writable() will unref passed buffer.
Specifically, the use after free or double free can happen if:
* Crop meta of buffer copy is required because of non-zero
top-left crop position
* zero-copy is possible with crop meta
* A picture was duplicated, interlaced h264 stream for example
Interlaced h264 stream with non-zero top-left crop position
is not very common but it's possible configuration in theory.
Thus gst_buffer_make_writable() should be called with
GstVideoCodecFrame.output_buffer directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6706>
A DPB buffer held by codec picture object may not be writable
at the moment, then gst_buffer_make_writable() will unref passed buffer.
Specifically, the use after free or double free can happen if:
* Crop meta of buffer copy is required because of non-zero
top-left crop position
* zero-copy is possible with crop meta
* A picture was duplicated, interlaced h264 stream for example
Interlaced h264 stream with non-zero top-left crop position
is not very common but it's possible configuration in theory.
Thus gst_buffer_make_writable() should be called with
GstVideoCodecFrame.output_buffer directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6706>
The goal of this code was, for programs which were updates (i.e. adding/removing
streams but not completely changing) to allow dynamic addition/removal of
streams without completely removing everything.
But this wasn't 100% tested and there are a bunch of issues which make it fail
in plenty of ways.
For now disable that feature and force the legacy "add all pads again and then
remove old ones" behaviour to make it switch.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6651>
In addition to device removed status monitoring in gst_d3d11_result()
method, if ID3D11Device4 interface is available,
an event handle will be used for device removed status update.
And "device-removed" signal is removed since applications can monitor
the device removed status via gobject notify
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6699>
Adding new property in order to notify users of device removed status.
Once device removed status is detected, application should release
all ID3D12Device objects corresponding to the adapter, including
GstD3D12Device object. Otherwise D3D12CreateDevice() call for the
adapter will fail.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6699>
It seems that when D3D11CreateDevice collides in time
with other D3D11 calls, in particular the proccess of
creating a shader, it can corrupt the memory in the driver.
D3D11 spec doesn't seem to require any thread safety from
D3D11CreateDevice. Following MSDN, it is supposed to be called
in the beginning of the proccess, while GStreamer calls it with each
new pipeline.
Such crashes in the driver were frequently reproducing on the
Intel UHD 630 machine.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6686>
We suspect that it's not thread safe to just create and
destroy the device from any thread, particularly because
of D3D11CreateDevice, that is not documented as thread-safe.
While D3D11CreateDevice is usually protected from outside
by the gst_d3d11_ensure_element_data, it still can cross
with the Release() method of another device.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6686>
If propose_allocation comes before set_caps, self->video_info
has not been extracted from caps and self->video_info.size is 0.
It causes buffer pool fail to set config . So need to use info
size got from query instead when propose_allocation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6666>
Otherwise, if we run in to the copy case, this can cause these
groups to stay around with queued flag set, but never actually
queued, until gst_v4l2_allocator_flush() is called, which then
erroneously frees the associated memories, causing the release
function to decrement the allocator refcount where it was never
incremented, resulting in early allocator disposal, and either
deadlock or use after free.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6552>
Clarify the fact that `encodebasebin->src_pad` is set when using a static source
pad (`encodebin`) and when not set it's dynamically added source
pads (`encodebin2`).
Fixes usage of encodebin2 when profiles are updated
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6667>
The caps obtained from parsing the allocation query is borrowed and
should not be unreffed. This fixes criticals assertion introduced in
1.24.1.
(gst-launch-1.0:242): GStreamer-CRITICAL **: 19:48:02.667:
gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Fixes: 5189e8b956 ("v4l2codecs: decoders: Add DMA_DRM caps support")
Closes#3462
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6679>
We used to only track the first one but this was wrong, so we start
tracking all the children properties here, adapting the test which
was already thought for this to be implemented.
At the same time add some flags to determine how children properties
need to be handled adding a mode that means that all duplicated
children props will be set together when the user sets that particular
child property. This is going to be tested in a following commit.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/918>
Some decoder drivers need to wait enough capture buffers before
starting to decode. But the dequeued buffer flag LAST but empty
has no chance to queue back to driver, which makes decode hang
after seek. So need to queue back such kind of buffer to driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6579>
Output buffers don't have to be writable. Accepting read-only buffers
from the V4L2 buffer pool allows upstream elements to write directly
into the V4L2 buffers without triggering a CPU copy into a new buffer
from the same V4L2 buffer pool every time.
Tested with the vivid output device:
GST_DEBUG=GST_PERFORMANCE:7 gst-launch-1.0 videotestsrc ! v4l2sink device=/dev/video5
With this change, gst_v4l2_buffer_pool_dqbuf() must be allowed to not
resize read-only memories of output buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6572>
../subprojects/gst-plugins-bad/tests/check/libs/gstlibscpp.cc:41:
fatal error: gst/mpegts/gstmpegts-enumtypes.h: No such file or directory
Could only pass the needed deps to the libscpp test, but gets
messier to maintain, so let's at it for consistency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6643>
When using v2.0.2 of the subproject, it triggers werror for
unused functions that come from the fdkaac headers.
This avoids errors like the following when werror is set.
```
subprojects/fdk-aac-2.0.2/fdk-aac/FDK_audio.h:757:29: error: ‘FDKlibInfo_lookup’
defined but not used [-Werror=unused-function]
757 | static FDK_AUDIO_INLINE INT FDKlibInfo_lookup(const LIB_INFO* info,
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6611>
Since https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6153 ,
subtitle "decoders" (i.e. which decode to raw text) are no longer auto-plugged
by parsebin.
But if a given format does not have a parser at all, we would end up outputting
non-time/non-parsed outputs.
In order to mitigate the issue, until such parsers are available, we check if
the subtitle stream is in TIME format or not (i.e. whether it comes from a
parser or demuxer). If not, we attempt to plug in a subtitle "decoder".
Fixes#3463
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6592>
Fix
gstanalyticsmeta.c:134: Warning: GstAnalytics: "@instance"
parameter unexpected at this location
warning (caused by the extraneous empty line in the doc chunk)
and align function arguments with documentation and header file
(handle -> instance).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6585>
* RED_OR_ALPHA8 will map value to alpha for OpenGL, use R8 to avoid
2nd shader
* Determine texel size for proper texture memory preparation
* QByteArray::fromRawData() does shallow copy and thus leads to use of
corrupted memory
* Make sure RGBA dummy texture is fully opaque
* QRhiTexture::create() must be called to allocate texture resources
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6578>
During RTP-Info synchronization, clock_base was temporarily switched
from the actual clock-base to the base RTP time and then back some lines
later.
Instead directly work with the base RTP time. The comment about using a
signed variable for convenience doesn't make any sense because all
calculations done with the value are unsigned.
Similarly, rtp_clock_base was overridden with the rtp_delta when
calculating it, which was fine because it is not used anymore
afterwards. Instead, introduce a new variable `rtp_delta` to make this
calculation clearer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6536>
It's not in the same period as the current RTP base time but always in
the very first period. This avoids using it again at a much later time.
The code in question is only triggered with rtcp-sync=rtp-info.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6536>
It is compared to other extended RTP timestamps all over rtpjitterbuffer
and since 4df3da3bab the initial extended RTP timestamp is not equal
anymore to the plain RTP time.
Continue passing a non-extended RTP timestamp via the `sync` signal for
backwards compatibility. It will always be a timestamp inside the first
extended timestamp period anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6536>
When the buffer DTS is estimated based on arrival time at the
jitterbuffer (rather than provided on the incoming buffer itself),
it shouldn't be used for skew adjustment. The typical case is
packets being deinterleaved from a tunnelled TCP/HTTP RTSP stream,
and the arrival times at the jitter buffer are not well enough
correlated to usefully do skew adjustments.
This restores the original intended behaviour for the 'estimated dts'
path, that was broken years ago during other jitterbuffer refactoring.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6509>
