Need to pass -DGST_DISABLE_DEPRECATED to avoid warnings when
testing deprecated API such as gst_uri_construct().
Also remove #ifndef GST_DISABLE_DEPRECATED guard from header
file, we don't use those any more for functions, the
GST_DEPRECATED_FOR macro is enough.
The gst_uri_construct function was escaping the location string
as a generic uri string. This is incorrect since the slash('/')
characters are reserved for use in this exact case. The patch
changes the escape_string function mode to handle the path correctly.
I have deleted the escape_string function since it is no longer being
used and have created a unit test for the function. I have also
deprecated this function in favour of the GstUri API.
https://bugzilla.gnome.org/show_bug.cgi?id=783787
This is something bindings can't handle and it causes leaks. Instead
move the ref_sink() to the explicit, new() constructors.
This means that abstract classes, and anything that can have subclasses,
will have to do ref_sink() in their new() function now. Specifically
this affects GstClock and GstControlSource.
https://bugzilla.gnome.org/show_bug.cgi?id=743062
Use g_object_new() instead which nowadays has a shortcut for the
no-properties check. It still does an extra GType check in the
function guard, but there's a pending patch to remove that
and it's hardly going to be a performance issue in practice,
even less so on a system that's compiled without run-time checks.
Alternative would be to move to the new g_object_new_properties()
with a fallback define for older glib versions, but it makes the
code look more unwieldy and doesn't seem worth it.
Fixes deprecation warnings when building against newer GLib versions.
https://bugzilla.gnome.org/show_bug.cgi?id=780903
If guessing that a string matches a flagset, be more thorough
at checking that the string following a string of hex:hex:
actually looks like a flag set string. Add some unit tests
to catch more cases.
https://bugzilla.gnome.org/show_bug.cgi?id=779755
We would add the offset a second time in _scan_for_start_code()
when we found a result, but it's already been added to the data
pointer at the beginning of _masked_scan_uint32_peek(), so the
peeked value would be wrong if the initial offset was >0, and
we would potentially read memory out-of-bounds.
Add unit test for all of this.
https://bugzilla.gnome.org/show_bug.cgi?id=778365
The unit test defines a test parse element that inherit from GstBaseParse.
The test pipeline is: fakesrc ! testparse ! fakesink sync=1
Before the fix b2c05cac8 the first new test would have fail because the
pipeline would have wait doing nothing just after proceeded the seek event.
The second new test would have fail because the pipeline would have
played the media instantly just after proceeded the seek event
(like if sync was FALSE on the sink).
https://bugzilla.gnome.org/show_bug.cgi?id=777780
Allows proper usage of structures in structures in caps. Subtraction
is not implemented due to complications with empty fields representing
all possible values.
The only implementation that doesn't delegate to the already existing
GstStructure functions is the union function.
https://bugzilla.gnome.org/show_bug.cgi?id=775796
As an usecase of URI fragment, it can indicate temporal or spatial
dimension of a media stream. To easily parse key-value pair,
newly added gst_uri_get_media_fragment_table () API will provide
the table of key-value pair likewise URI query.
See also https://www.w3.org/TR/media-frags/https://bugzilla.gnome.org/show_bug.cgi?id=774830
This structure is always allocated by GStreamer, can't be
subclassed or extended, and is never allocated or used on
the stack, so we don't need any padding and can extend it
as we please.
Allows proxying the control interface from one property on one GstObject
to another property (of the same type) in another GstObject.
E.g. in a parent-child relationship, one may need to
gst_object_sync_values() on the child and have a binding (set elsewhere)
on the parent update the value.
Note: that this doesn't solve GObject property forwarding and must be
taken care of by the implementation manually or using GBinding.
https://bugzilla.gnome.org/show_bug.cgi?id=774657
Add unit test to ensure that.
It can be a normal execution path to do some map trials and there is
no need to worry the user in that case.
The application has to check the return value of gst_memory_map.
https://bugzilla.gnome.org/show_bug.cgi?id=765600
Introduce a new operator ':' - e.g. element1 ':' element2
For example, 'uridecodebin : encodebin' -
if the encodebin has multiple profiles compatible with the
decodebin, multiple links will be created.
With '!' , after one delayed link is successfully done, the
pad-added callback is disconnected.
https://bugzilla.gnome.org/show_bug.cgi?id=751450
This carries over code for a similar test from multiqueue to ensure full
control over the dataflow while testing. (The previous attempt was racy
since the fill level changed without any thread sync with the test code.)
https://bugzilla.gnome.org/show_bug.cgi?id=771210
Basically we already have each test with a 20sec timeout,
and testsuite can last more than the default 30secs from
meson. 3 minutes is another arbitrary timeout but should
be good enough.
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large multiqueue max sizes and watermarks like 0.5%.
Also adding a test to check the fill and watermark level behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=770628
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large queue2 max sizes and watermarks like 0.5%.
Also adding a test to check the fill and watermark level behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=769449
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
A new event which precedes EOS in situations where we
need downstream to unblock any pads waiting on a stream
before we can send EOS. E.g, decodebin draining a chain
so it can switch pads.
https://bugzilla.gnome.org/show_bug.cgi?id=768995
Redirection messages are already used in fragmented sources and in
uridecodebin, so it makes sense to introduce these as an official message
type.
https://bugzilla.gnome.org/show_bug.cgi?id=631673
We don't do calculations with different units (buffer offsets and bytes)
anymore but have functions for:
1) getting the number of bytes since the last discont
2) getting the offset (and pts/dts) at the last discont
and the previously added function to get the last offset and its distance from
the current adapter position.
https://bugzilla.gnome.org/show_bug.cgi?id=766647
API: gst_buffer_prev_offset
API: gst_buffer_get_offset_from_discont
The gst_buffer_get_offset_from_discont() method allows retrieving the current
offset based on the GST_BUFFER_OFFSET of the buffers that were pushed in.
The offset will be set initially by the GST_BUFFER_OFFSET of
DISCONT buffers, and then incremented by the sizes of the following
buffers.
The gst_buffer_prev_offset() method allows retrievent the previous
GST_BUFFER_OFFSET regardless of flags. It works in the same way as
the other gst_buffer_prev_*() methods.
https://bugzilla.gnome.org/show_bug.cgi?id=766647
It is better to have separate tests:
1) the test name will tell what is broekn when the test fails
2) we still run the other tests when one assert fails
3) the tests are easier to understand
4) we don't rely on sie effect of previous actions
5) ...
Also ix the assertion message for the name checks (Gst -> fakeobject).
GObject allow calling g_object_notify() within set_property() and
won't notify it twice. As it was raised during review, add a unit test to
make sure.
https://bugzilla.gnome.org/show_bug.cgi?id=766923
This means applications and bin sub-classes can easily track when
a new child element is added to the pipeline sub-hierarchy or
removed.
Currently doesn't signal deep added/removed for elements inside
a bin if a bin is added/removed.
https://bugzilla.gnome.org/show_bug.cgi?id=578933
gst_check_setup_sink_pad() internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free the
buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=765903
The test rely on bus being flushed when setting the bin to the NULL state which
is not the case. This apply only when setting the pipeline state to
NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=765720
This ensures the following special case is handled properly:
1. Queue is empty
2. Data is pushed, fill level is below the current high-threshold
3. high-threshold is set to a level that is below the current fill level
Since mq->percent wasn't being recalculated in step #3 properly, this
caused the multiqueue to switch off its buffering state when new data is
pushed in, and never post a 100% buffering message. The application will
have received a <100% buffering message from step #2, but will never see
100%.
Fix this by recalculating the current fill level percentage during
high-threshold property changes in the same manner as it is done when
use-buffering is modified.
https://bugzilla.gnome.org/show_bug.cgi?id=763757
We need to clear some global state and register a new test
basetransform subclass for each test because we do things
in class_init base on global state.
https://bugzilla.gnome.org/show_bug.cgi?id=623469
The test assumed that if a buffer has the same pointer address as
before it is in fact the same mini object and has been re-used by
the pool. This seems to be mostly true, but not always. The buffer
might be destroyed and when a new buffer is created the allocator
might return the same memory that we just freed.
Instead attach a qdata with destroy notify function to buffer
instances we want to track to make sure the buffer actually
gets finalized rather than resurrected and put back into the pool.
Be notified in the application thread via bus messages about
notify::* and deep-notify::* property changes, instead of
having to deal with it in a non-application thread.
API: gst_element_add_property_notify_watch()
API: gst_element_add_property_deep_notify_watch()
API: gst_element_remove_property_notify_watch()
API: gst_message_new_property_notify()
API: gst_message_parse_property_notify()
API: GST_MESSAGE_PROPERTY_NOTIFY
https://bugzilla.gnome.org/show_bug.cgi?id=763142
Checking the current element's state when we're adding pads to
the parent element is checking the wrong thing.
Silences a 'attempting to add an inactive pad to a running element'
warning when adding a ghost pad to a running parent bin of the parent
bin of the element.
https://bugzilla.gnome.org/show_bug.cgi?id=764176
The alias define GST_TYPE_PARENT_BUFFER_META_API_TYPE is wrong and
breaks the usage of gst_buffer_get_parent_buffer_meta().
This patch fixes the GType alias and make another alias to keep the API
compatibility guarded by GST_DISABLE_DEPRECATED.
Also added a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=763112
When holding a regular ref it will cause the GstBus to never
reach 0 references and it won't be destroyed unless the application
explicitly calls gst_bus_remove_signal_watch().
Switching to weakref will allow the GstBus to be destroyed.
The application is still responsible for destroying the
GSource.
https://bugzilla.gnome.org/show_bug.cgi?id=762552
Showcases the regression introduced by this commit:
Commit: ab55ad7eaa
Author: Stian Selnes <stian@pexip.com>
Date: Wed Jan 27 13:20:23 2016 +0100
ghostpad: Do nothing in _internal_activate_push_default
Fixes a race where an entry is set to BUSY in
gst_system_clock_id_wait_jitter() and is UNSCHEDULED before
gst_system_clock_id_wait_jitter_unlocked() starts processing it. The
wakeup added by gst_system_clock_id_unschedule() must be cleaned up.
Two stress tests are added. One test that triggers the specific issue
described above. The second stresses the code path where a wait is
rescheduled because the poll returned early.
https://bugzilla.gnome.org/show_bug.cgi?id=761586
Change the gst_tracer_record_new() api to take the parameters the make the
spec structure directly. This allows us to own the top-level structure and
also collect the args so that we can take ownership of the sub-structures.
https://bugzilla.gnome.org/show_bug.cgi?id=760821
Only hide GstTracer and GstTracerRecord API behind GST_USE_UNSTABLE_API,
but don't spew any warnings, otherwise everyone has to define this
to avoid compiler warnings.
This reverts parts of commit 89ee5d948d.
We use this class to register tracer log entry metadata and build a log
template. With the log template we can serialize log data very efficiently.
This also simplifies the logging code, since that is now a simple varargs
function that is not exposing the implementation details.
Add docs for the new class and basic tests.
Remove the previous log handler.
Fixes#760267
Changing states up and down while buffers are being pushed is not
a valid use case. If a pad is deactivated and reactivated during
a buffer push it is racy with the check of pushed sticky events
and the actual chainfunction call. As it might call the chain
without noticing the peer pad lost its previous sticky events.
https://bugzilla.gnome.org/show_bug.cgi?id=758340
Adds 3 new tests for testing accept-caps behavior with
proxy-caps pads.
1) A scenario where there is no proxy. The caps should be compared to the
template caps of the pad
2) A scenario where there is a compatible pad. The caps should be compared
to the proxied pad caps (and also with the template)
3) A scenario where there is an incompatible proxy pad. No caps should be
possible at all.
https://bugzilla.gnome.org/show_bug.cgi?id=754112
Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.
Pasting from design docs:
===============================
Stream time is calculated using the buffer times and the preceding SEGMENT
event as follows:
stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time
For negative rates, B.timestamp will go backwards from S.stop to S.start,
making the stream time go backwards.
===============================
Therefore, the calculation for applied_rate < 0 should be:
stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time
and the reverse:
B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)
https://bugzilla.gnome.org/show_bug.cgi?id=756810
The previous change (see bgo #756069) was causing us to free the same pointer
multiple times. If we actually get a sample back, the test fails, no need to
free anything in that case.
The default padding I introduced in d4f81fb4e6 is
actually only 4 pointers and on 32bit platforms already smaller than the union.
Replace it with a fixed 64byte padding. Don't add the normal padding for now.
Fixes#755822
While this technically is an abi break, we decided to do this:
1) the struct is documented to be internal
2) the struct is alloced and freed inside the library
3) there are no public methods that receive or return instances
4) the only code known to use this struct are classes containd here
When adding an element to a bin we need to propagate the GstContext's
to/from the element.
This moves the GstContext list from GstBin to GstElement and adds
convenience functions to get the currently set list of GstContext's.
This does not deal with the collection of GstContext's propagated
using GST_CONTEXT_QUERY. Element subclasses are advised to call
gst_element_set_context if they need to propagate GstContext's
received from the context query.
https://bugzilla.gnome.org/show_bug.cgi?id=705579
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.
Also added unit tests.
Iterator may need to be resynced, for instance if pads are released
during state change.
got_eos should be protected by the object lock of the element, not of
the pad, as is the case throughout the rest of the funnel code.
https://bugzilla.gnome.org/show_bug.cgi?id=755343
In order for gst_harness_new_full to be MT-safe the increase and
decrease of HARNESS_REF must be MT-safe. This allows for creating
multiple harnesses from different threads wrapping the same element.
https://bugzilla.gnome.org/show_bug.cgi?id=754661
As this test is using a short sleep (GST_USECOND, which is 10ms
in microsecond), sometimes that EOS event is received before the
loop in basesrc have run _do_seek() and pushed the update segment.
To solve this issue, we wait for the initial segment (and flush it)
then we wait for the second segment before sending EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=753365
In some cases, probes might want to handle the buffer/event/query
themselves and stop the data from travelling further downstream.
While this was somewhat possible with buffer/events and using
GST_PROBE_DROP, it was not applicable to queries, and would result
in the query failing.
With this new GST_PROBE_HANDLED value, the buffer/event/query will
be considered as successfully handled, will not be pushed further
and the appropriate return value (TRUE or GST_FLOW_OK) will be returned
This also allows probes to return a non-default GstFlowReturn when dealing
with buffer push. This can be done by setting the
GST_PAD_PROBE_INFO_FLOW_RETURN() field accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=748643
If no date and only a time is given in gst_date_time_new_from_iso8601_string(),
assume that it is "today" and try to parse the time-only string. "Today" is
assumed to be in the timezone provided by the user (if any), otherwise Z -
just like the behavior of the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=753455
To be able to disable the slightly "magic" forwarding of the
necessary events between the harnesses.
Also introduce a new test-suite for GstHarness, that documents the
feature, and should hopefully expand into documenting most of the
features the harness possesses.
https://bugzilla.gnome.org/show_bug.cgi?id=752746
Writing a test for unscheduling the gst_clock_id_wait inside the
identity element, found an invalid read, caused by removing the clock-id
when calling _unschedule instead of letting the code calling _wait remove
the clock-id after being unscheduled.
https://bugzilla.gnome.org/show_bug.cgi?id=752055
The check for the presence of the parent in the presence of
the NEED_PARENT flag was missing for the chain function. Also keep
a ref on the parent in case the pad is removed mid-chain.
test_intersect_flagset fails because when caps is being
created, flags and mask are being cast to uint64 while
they should be uint. This results in invalid memory access
or a segfault.
https://bugzilla.gnome.org/show_bug.cgi?id=751628
Adds tests for gst_element_get_compatible_pad for when it has to
request pads.
Note that these tests don't cover the case when it has to request
a pad that already exists.
https://bugzilla.gnome.org/show_bug.cgi?id=751235
Make gst_collect_pads_clip_running_time() function also store the
signed DTS in the CollectData. This signed DTS value can be used by
muxers to properly handle streams where DTS can be negative initially.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Allow for sub-classes which want to collate incoming buffers or
split them into multiple output buffers by separating the input
buffer submission from output buffer generation and allowing
for looping of one of the phases depending on pull or push mode
operation.
https://bugzilla.gnome.org/show_bug.cgi?id=750033
gst/gstmemory.c:570:38: error: implicit conversion from enumeration type 'GstMapFlags' to different enumeration
type 'GstLockFlags' [-Werror,-Wenum-conversion]
fail_unless (gst_memory_lock (mem, GST_MAP_WRITE));
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
Now that locking exclusively dows not always succeed, we need to signal
the failure case from gst_memory_init.
Rather than introducing an API or funcionality change to gst_memory_init,
workaround by checking exclusivity in the calling code.
https://bugzilla.gnome.org/show_bug.cgi?id=750172
gst_memory_lock (mem, WRITE | EXCLUSIVE);
gst_memory_lock (mem, WRITE | EXCLUSIVE);
Succeeds when the part-miniobject.txt design doc suggests that this should fail:
"A gst_mini_object_lock() can fail when a WRITE lock is requested and
the exclusive counter is > 1. Indeed a GstMiniObject object with an
exclusive counter 1 is locked EXCLUSIVELY by at least 2 objects and is
therefore not writable."
https://bugzilla.gnome.org/show_bug.cgi?id=750172
GstFlagSet is a new type designed for negotiating sets
of boolean capabilities flags, consisting of a 32-bit
flags bitfield and 32-bit mask field. The mask field
indicates which of the flags bits an element needs to have
as specific values, and which it doesn't care about.
This allows efficient negotiation of arrays of boolean
capabilities.
The standard serialisation format is FLAGS:MASK, with
flags and mask fields expressed in hexadecimal, however
GstFlagSet has a gst_register_flagset() function, which
associates a new GstFlagSet derived type with an existing
GFlags gtype. When serializing a GstFlagSet with an
associated set of GFlags, it also serializes a human-readable
form of the flags for easier debugging.
It is possible to parse a GFlags style serialisation of a
flagset, without the hex portion on the front. ie,
+flag1/flag2/flag3+flag4, to indicate that
flag1 & flag4 must be set, and flag2/flag3 must be unset,
and any other flags are don't-care.
https://bugzilla.gnome.org/show_bug.cgi?id=746373
The old gst_object_has_ancestor will call the new code. This establishes the
symetry with the new gst_object_has_as_parent.
API: gst_object_has_as_ancestor()
gst_debug_unset_threshold_for_name() used to go into an
infinite loop when there was more than one category in
the list. This test captures the problem by failing
via timeout.
https://bugzilla.gnome.org/show_bug.cgi?id=748321
In order to support some types of protected streams (such as those
protected using DASH Common Encryption) some per-buffer information
needs to be passed between elements.
This commit adds a GstMeta type called GstProtectionMeta that allows
protection specific information to be added to a GstBuffer. An example
of its usage is qtdemux providing information to each output sample
that enables a downstream element to decrypt it.
This commit adds a utility function to select a supported protection
system from the installed Decryption elements found in the registry.
The gst_protection_select_system function that takes an array of
identifiers and searches the registry for a element of klass Decryptor that
supports one or more of the supplied identifiers. If multiple elements
are found, the one with the highest rank is selected.
This commit adds a unit test for the gst_protection_select_system
function that adds a fake Decryptor element to the registry and then
checks that it can correctly be selected by the utility function.
This commit adds a unit test for GstProtectionMeta that creates
GstProtectionMeta and adds & removes it from a buffer and performs some
simple reference count checks.
API: gst_buffer_add_protection_meta()
API: gst_buffer_get_protection_meta()
API: gst_protection_select_system()
API: gst_protection_meta_api_get_type()
API: gst_protection_meta_get_info()
https://bugzilla.gnome.org/show_bug.cgi?id=705991
In order for a decrypter element to decrypt media protected using a
specific protection system, it first needs all the protection system
specific information necessary (E.g. information on how to acquire
the decryption keys) for that stream.
The GST_EVENT_PROTECTION defined in this commit enables this information
to be passed from elements that extract it (e.g. qtdemux, dashdemux) to
elements that use it (E.g. a decrypter element).
API: GST_EVENT_PROTECTION
API: gst_event_new_protection()
API: gst_event_parse_protection()
https://bugzilla.gnome.org/show_bug.cgi?id=705991
Only save the messages we're interested in and expecting.
When run with *:9 we might get additional TRACE level
messages from other categories and then we don't end up
with the number of messages we expect.
This tests add an idle probe on an idle pad from a separate thread
so that the callback is called immediatelly. This callback will sit
still and then we try to push a buffer on this same pad. It verifies
that the idle probe blocks data passing
https://bugzilla.gnome.org/show_bug.cgi?id=747852
When a bin changes states upwards, and a child fails to change,
any child that was already switched will not be reset to its
original state, leaving its state inconsistent with the bin,
which does not change state due to the failure.
If the state change was from NULL to READY, it means that deleting
this bin will cause those children to be deleted while not in
NULL state, which is a Bad Thing. For other upward changes, it
is less of a problem, as a subsequent switch back to NULL will
cause an actual downwards change on those inconsistent elements,
albeit from the "wrong" state.
We now reset state to the original one when a child fails.
Includes unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=747610
Use case: we want to block the source pad of a leaky queue and
drop the buffer that causes the block. If we return PROBE_DROP
then the buffer gets dropped, but we get called again. If we
return PROBE_OK we can't easily drop the buffer. If we just
replace the item into the GstPadProbeInfo structure with NULL,
GStreamer will push a NULL buffer to the next element when we
unblock the pad probe. This patch ensures it doesn't do that.
https://bugzilla.gnome.org/show_bug.cgi?id=734342
Update test_seeking testcase to verify the render and render_list
virtual method handle buffers and buffer list containing multiple
memory blocks correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=747223
GstFileSink implements the render_list virtual method to render
a list of buffers. Update the test_seeking test case to also
check the render_list method implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=747100
Don't unwrap strings that start but don't finish with a double quote. If a
string is delimited by two quotes we unescape them and any special characters
in the middle (like \" or \\). If the first character or the last character
aren't a quote we assume it's part of an unescaped string.
Moved some deserialize_string unit tests because we don't try to unwrap strings
missing that second quote anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=688625
Otherwise baseparse will consider empty streams to be an error while
an empty stream is a valid scenario. With this patch, errors would
only be emitted if the parser received data but wasn't able to
produce any output from it.
This change is only for push-mode operation as in pull mode an
empty file can be considered an error for the one driving the
pipeline
Includes a unit test for it
https://bugzilla.gnome.org/show_bug.cgi?id=733171
This property avoids not linked error when all the pads are unlinked
or when there are no source pads. This is useful in dynamic pipelines
where it can happen that for a short time there are no pads at all or
all downstream pads are not linked yet.
https://bugzilla.gnome.org/show_bug.cgi?id=746436
3 new tests:
1) Tests that a stream that is empty (just an EOS event)
on inactive pad doesn't get through and tamper
with the active pad that still has data
2) Tests that a stream that is shorter than the active one
(pushes EOS earlier) doesn't has its EOS pushed
3) Tests that switching to an inactive stream that has received
EOS will make input-selector push EOS
https://bugzilla.gnome.org/show_bug.cgi?id=746518
Do not do any checks for the start/stop in the new
gst_segment_to_running_time_full() method, we can let this be done by
the more capable gst_segment_clip() method. This allows us to remove the
enum of results and only return the sign of the calculated running-time.
We need to put the old clipping checks in the old
gst_segment_to_running_time() still because they work slightly
differently than the _clip methods.
See https://bugzilla.gnome.org/show_bug.cgi?id=740575
Add a clip argument to gst_segment_to_running_time_full() to disable
the checks against the segment boundaries. This makes it possible to
generate an extrapolated running-time for timestamps outside of the
segment.
See https://bugzilla.gnome.org/show_bug.cgi?id=740575
Add a helper method to get a running-time with a little more features
such as detecting if the value was before or after the segment and
negative running-time.
API: gst_segment_to_running_time_full()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=740575
The position in the segment is relative to the start but the offset
isn't, so subtract the start from the position when setting the offset.
Add unit test for this as well.
Don't stop the pool in set_config(). Instead, let the controlling
element manage it. Most of the time, when an active pool is being
configured is because the caps didn't change.
https://bugzilla.gnome.org/show_bug.cgi?id=745377
A variant of gst_buffer_copy that forces the underlying memory
to be copied.
This is added to avoid adding an extra reference to a GstMemory
that might belong to a bufferpool that is trying to be drained.
The use case is when the buffer copying is done to release the
old buffer and all its resources.
https://bugzilla.gnome.org/show_bug.cgi?id=745287
Demultiplex a stream to multiple source pads based on the stream ids from the
stream-start events. This basically reverses the behaviour of funnel.
https://bugzilla.gnome.org/show_bug.cgi?id=707605
This reverts commit 1911554cff.
This breaks the functionality of GST_PAD_FLAG_NEED_PARENT, the reason for this
flag is that if a pad is removed from a running element, you don't want
functions (such as chain or event) to be called on the pad without a parent set.
This can happen if you remove a request or sometimes pad from a running element.
I don't see the code that caused this in tsdemux, but if it needs to unset
the flag on remove, it should do it itself and then make sure that the parent
exists in any pad function.
Add domain checks for the input values, and a variable precision
calculation that loops if necessary to ensure we never overflow
accumulators and then silently produce garbage results.
Make the (non-public) linear regression function available for
unit testing by putting it in a separate source file the test
can include. Add a unit test that the new regression function
produces sensible results for several inputs taken from real-world
captures.
Pools are allowed to change the size in order to adapt padding. So
don't check the size. Normally pool will change the size without
failing set_config(), but it they endup changing the size before
the validate method may fail on a false positive.
https://bugzilla.gnome.org/show_bug.cgi?id=741420
If a task thread is calling pause on it self and the
controlling/"main" thread stops the task, it could end in a race
where gst_task_func loops and then checks for paused after the
controlling thread just changed the task state to stopped.
Hence the task would actually call func again even though it was
both paused and stopped.
https://bugzilla.gnome.org/show_bug.cgi?id=740001
In this mode we accept previously set filter caps until
upstream renegotiates to something that is compatible
to the current filter caps.
This allows dynamic caps changes in the pipeline even
if there is a queue between any conversion element
and the capsfilter. Without this we would get not-negotiated
errors if timing is bad.
https://bugzilla.gnome.org/show_bug.cgi?id=739002
Use an array of constant strings so if arguments get
removed from it they are not considered leaked, and
valgrind is happy. Still some stuff leaking in GLib
though.
