This should fix pipelines such as this one to work as expected
... ! opusenc ! capsfilter caps='audio/x-opus,
channels=1; audio/x-opus, channels=2' ! ...
The expectation is that the encoder will propose the first structure
before the second one to the source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3673>
The number of expected pads was:
* Defaulting to 1
* Or being overriden by GST_MESSAGE_STREAMS_SELECTED
This fails if upstream isn't a selectable source and has multiple streams, and
would therefore cause failures with multi-stream gapless playback
Fixes#1672
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
It is quite possible to have the blocking probe called from different streaming
threads when all expected pads are present.
* Notify all waiters by using g_cond_broadcast instead of g_cond_signal
* Properly remove the probe after waiting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
gst_element_add_pad() is supposed to activate the pad if the element
state is >= PAUSED and the pad is not already active.
Unfortunately, before this patch, the activation was performed while the
element lock was still taken, which ended causing a deadlock in
gst_pad_start_task() as it attempted to post `stream-status` message in
the element, which also requires the element lock.
Elements could work around this bug by activating the pad manually
before adding it to the element.
This patch fixes the problem by performing pad activation only after the
element lock has been released.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3635>
Commit d3a66f9851 introduced a potential deadlock with two parallel release_pad
calls, where one could release the main multiqueue lock (qlock) while still
holding the reconf_lock and then calling other routines which in some conditions
may try to acquire qlock again. The second release_pad could already acquire the
qlock and then start waiting on reconf_lock, which may never be possible because
because the first one isn't releasing it until it can acquire qlock.
Fix it by holding reconf_lock for the whole durationg of qlock, making this
particular deadlock impossible.
Fixes#1642
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3571>
This is recommended by various specifications for such framerates, while
for integer framerates we continue using centiframes to allow for some
more accuracy.
Using N means that no rounding error accumulates, eventually leading to
outputting a packet with a different duration.
Some tools such as MediaInfo determine that a stream is variable
framerate if any packet has a different duration than the others, and
there is no reason I can see for not using the full 4 bytes of
resolution that the mp4 timescale offers.
Example problematic pipeline:
```
videotestsrc num-buffers=5001 ! video/x-raw,framerate=60000/1001,width=320,height=240 ! \
videoconvert ! x264enc bitrate=80000 speed-preset=1 tune=zerolatency ! h264parse ! \
video/x-h264,profile=high-10 ! mp4mux ! filesink location="result2.mp4"
```
This results in a media file that MediaInfo detects as variable
framerate because the 5000th packet has duration 99 instead of 100.
With this patch, the timescale is 60000 and all packets have duration
1001.
Related issue for context: https://bugzilla.gnome.org/show_bug.cgi?id=769041
Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3049>
The VAAPI vaQueryVideoProcPipelineCaps() requires the context as the
parameter. So far, we always pass VA_INVALID_ID and it can succeed.
But the API does not say that and in theory, a valid context is required.
Now the new platform really needs a valid context and so we have to
delay that query until the context is created.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3613>
NVDEC launches CUDA kernel function (ConvertNV12BLtoNV12 or so)
when CuvidMapVideoFrame() is called. Which seems to be
NVDEC's internal post-processing kernel function, maybe
to convert tiled YUV to linear YUV format or something similar.
A problem if we don't pass CUDA stream to the CuvidMapVideoFrame()
call is that the NVDEC's internel kernel function will use default CUDA stream.
Then lots of the other CUDA API calls will be blocked/serialized.
To avoid the unnecessary blocking, we should pass our own
CUDA stream object to the CuvidMapVideoFrame() call
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3605>
Using the "GstBin" flags to check if an adaptive demuxer is streams-aware isn't
a good idea since it prevents using elements which aren't bins.
Instead we see if a collection was posted by the demuxer by the time a pad is
added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3601>
If a discontinuity is detected in push mode, we need to clear the cached section
observations since they might have potentially changed.
This was only done properly when operating with TIME segments (dvb, udp,
adaptive demuxers, ...) but not with BYTE segments (such as with custom app/fd
sources).
We still don't want to flush out the PCR observations, since this might be
needed for seeking in push-based BYTE sources.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1650
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3584>
This reverts the decision from
https://bugzilla.gnome.org/show_bug.cgi?id=754230
where it was decided that we rather play safe and only use the `tfdt` if
it is "significantly different" to the sum of sample durations.
As the specification says
If the time expressed in the track fragment decode time (‘tfdt’) box
exceeds the sum of the durations of the samples in the preceding
movie and movie fragments, then the duration of the last sample
preceding this track fragment is extended such that the sum now
equals the time given in this box.
we have to use the `tfdt` in general to allow for it to signal gaps in
the stream.
A muxer producing fragments might not yet know the full duration of the
last sample of a previous fragment if the next fragment starts with a
gap, and knowing the actual start of the next fragment would potentially
require to violate latency requirements.
Additionally, the existence of `tfdt` allows to avoid accumulating
rounding errors from summing up the durations.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3586>
... when rendering on external HWND. ShowWindow() will cause
synchronous message passing to window thread and then can be blocked.
At the same time, window thread can wait for GStreamer thread.
Instead of the synchronous call, queue the task to window message
and performs from the window thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3583>
The rtpjitterbuffer test drop_messages_interval uses a GstClockTime for
the message drop interval. This property is defined as a guint. On
systems with 64-bit time_t but 32-bit uint, this can cause the
g_object_set function to fail to read the arguments properly.
Fixes: #1656
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3580>
Deadlock sequence:
* From a streaming thread, d3d11videosink sends synchronous message
to the parent window, so that internal (child) window can be
constructed on the parent window's thread
* App thread (parent window thread) is waiting for pipeline's
state change (to GST_STATE_NULL) but streaming thread is
blocked and waiting for app thread
To avoid the deadlock, GstD3D11WindowWin32 should send message
to the parent window asynchronously.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3570>
If we keep the old events they can be end up being passed to the app, that could
discard the protection information because it has been seen before.
Drive by improvement: use g_queue_clear_full instead of foreach+clear for
protection events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3547>
On macOS, a Cocoa event loop is needed in the main thread to ensure
things like opening a GL window work correctly. In the past, this was
patched into glib via Cerbero, but that prevented us from updating it.
This workaround simply runs an NSApplication and then calls the
main function on a secondary thread, allowing GStreamer to correctly
display windows and/or system permission prompts, for example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3532>
When a session request is coming in, ERROR occurs when the callee is busy.
But peer_status is the status of the caller, which is of course None when
calling someone, while self.peers[callee_id][2] is that of the callee.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2460>
jpegdec is capable to parse input frames, but if jpegparse is before,
there's no need to reparse frames. This patch configure jpegdec as
packetized, skipping parsing, if negotiated sink caps has the boolean
field 'parsed' as true.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2464>
Systems like musl libc don't support ISO 6937 in iconv. This ensures
that the MPEG-TS plugin can cope with that. There is existing support
in the plugin for other methods, so it seems to have been the original
intent anyway.
Fixes: #1314
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3245>
According to comment in gst_pulsering_stream_latency_cb, latency updates
happen every 100 ms. The code in gst_pulsering_stream_latency_cb does
not care about the actual state of the ringbuffer, pbuf->acquired or
not.
Thus, every 100 ms the ringbuf->segdone may be set, even though the
object itself might be in 'destroyed' state. On next
gst_pulseringbuffer_acquire the segdone is not touched, so playback may
resume with invalid/wrong segdone value. This finally leads to a period
of silence playing after resuming the pipeline.
The problem was found on 'not-yet-released'-hardware and so far was not
reproducible on desktop computer.
Removing the callback as long as the ringbuffer is not in 'acquired'
state solves the problem reliably on the hardware device that the issue
was detected on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3082>
Apparently mesa 22.3.0 has updated the egl headers, and eglplatform.h now
contains commit
3670d645f4
after which xlib headers don't get included by default anymore but are
dependent upon whether USE_X11 was defined.
This breaks headless builds of gstreamer-vaapi because we always define
an internal define USE_X11 as either 1 or 0.
Change these defines to GST_VAAPI_USE_XYZ instead to avoid this.
Fixes#1634
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3555>
This wasn't really done, and is needed in order to detect potential section
changes for sections that have got identical information (such as when switching
between streams that have the same PAT/PMT pid and subtable information).
Other checks exist in tsbase to detect if the "new" PAT/PMT really is an update or not.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3530>
gst_plugin_load_by_name() assumed a plugin has a filename,
which isn't true for static plugins, leading to criticals.
If a plugin is already loaded, just return the loaded plugin,
which makes it work for static plugins as well as saving a
moment for already-loaded dynamic plugins.
Add locking in gst_plugin_is_loaded(), as a plugin may be
still being loaded in another thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3552>
Currently the element calls abort when failed to prepare reference
picture set. This can happent when the input stream is somehow
corrupted, like a rtsp strem with lost packets. Now it will only
return with GST_FLOW_ERROR instead of terminating whole process.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3505>
An end packet is only produced once for the last subtitle, so multiple
GAP events between subtitles would result only in a single end packet
and nothing else otherwise. This would potentially starve downstream
then, so instead forward the GAP events in that case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3534>
Starting with glib 2.75, `NULL` is `nullptr`, which cannot be
implicitly coerced to `0`, unlike `NULL`. So explicitly pass `0`.
```
[3206/4524] Compiling C++ object subprojects/gst-plugins-bad/sys/directshow/gstdirectshow.dll.p/dshowvideosink.cpp.obj
FAILED: subprojects/gst-plugins-bad/sys/directshow/gstdirectshow.dll.p/dshowvideosink.cpp.obj
"cl" "-Isubprojects\gst-plugins-bad\sys\directshow\gstdirectshow.dll.p" "-Isubprojects\gst-plugins-bad\sys\directshow" "-I..\subprojects\gst-plugins-bad\sys\directshow" "-Isubprojects\gst-plugins-bad" "-I..\subprojects\gst-plugins-bad" "-Isubprojects\gst-plugins-base\gst-libs" "-I..\subprojects\gst-plugins-base\gst-libs" "-Isubprojects\gstreamer\libs" "-I..\subprojects\gstreamer\libs" "-Isubprojects\gstreamer" "-I..\subprojects\gstreamer" "-Isubprojects\orc" "-I..\subprojects\orc" "-I..\subprojects\gst-plugins-bad\sys\directshow\strmbase\baseclasses" "-Isubprojects\gst-plugins-base\gst-libs\gst\video" "-Isubprojects\gstreamer\gst" "-Isubprojects\gst-plugins-base\gst-libs\gst\audio" "-Isubprojects\gst-plugins-base\gst-libs\gst\tag" "-IC:/gst-install/include/glib-2.0" "-IC:/gst-install/lib/glib-2.0/include" "-IC:/gst-install/include" "/MD" "/nologo" "/showIncludes" "/utf-8" "/W2" "/EHsc" "/O2" "/Zi" "/wd4018" "/wd4146" "/wd4244" "/wd4305" "/utf-8" "/we4002" "/we4003" "/we4013" "/we4020" "/we4027" "/we4029" "/we4033" "/we4045" "/we4047" "/we4053" "/we4062" "/we4098" "/we4101" "/we4189" "/utf-8" "-D_MBCS" "/wd4189" "/wd4456" "/wd4701" "/wd4703" "/wd4706" "/wd4996" "-DHAVE_CONFIG_H" "/Fdsubprojects\gst-plugins-bad\sys\directshow\gstdirectshow.dll.p\dshowvideosink.cpp.pdb" /Fosubprojects/gst-plugins-bad/sys/directshow/gstdirectshow.dll.p/dshowvideosink.cpp.obj "/c" ../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(62): warning C5051: attribute 'noinline' requires at least '/std:c++20'; ignored
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(123): error C2664: 'LRESULT SendMessageA(HWND,UINT,WPARAM,LPARAM)': cannot convert argument 3 from 'nullptr' to 'WPARAM'
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(123): note: A native nullptr can only be converted to bool or, using reinterpret_cast, to an integral type
C:\Program Files (x86)\Windows Kits\10\include\10.0.19041.0\um\winuser.h(3690): note: see declaration of 'SendMessageA'
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(635): error C2664: 'BOOL SystemParametersInfoA(UINT,UINT,PVOID,UINT)': cannot convert argument 2 from 'nullptr' to 'UINT'
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(635): note: A native nullptr can only be converted to bool or, using reinterpret_cast, to an integral type
C:\Program Files (x86)\Windows Kits\10\include\10.0.19041.0\um\winuser.h(13153): note: see declaration of 'SystemParametersInfoA'
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(1593): error C2664: 'LRESULT SendMessageA(HWND,UINT,WPARAM,LPARAM)': cannot convert argument 3 from 'nullptr' to 'WPARAM'
../subprojects/gst-plugins-bad/sys/directshow/dshowvideosink.cpp(1593): note: A native nullptr can only be converted to bool or, using reinterpret_cast, to an integral type
C:\Program Files (x86)\Windows Kits\10\include\10.0.19041.0\um\winuser.h(3690): note: see declaration of 'SendMessageA'
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3528>
The stream selection is done on the currently outputting tracks, but in order to
(de)activate the backing streams we can only do it if the input and output
period are identical.
Fixes crash when doing stream selection during period migration
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3525>
This adds "id" variants to most debugging functions, and allows providing a
string identifier instead of a GObject.
This allows providing unified and clearer debug logs for all the
non-gobject-based items, and opens the way for more unified logging.
As an extension, copying the object name is avoided as much as possible, by
using it directly instead of going through another copy.
* API : gst_debug_message_get_object_id
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3483>
This regression was introduce by fix for making buffer pool thread safe. When
we renegotiate, the pool will be setup after we set the format. But the code
has been simplified to only get the pool once before, which caused a null
pointer deref.
Fixes 94ba019 ("v4l2: Fix SIGSEGV on 'change state' during 'format change'")
Related to !3481Fixes#1626
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3513>
There are cases where user might want to be in full control of the
timeline and not be limited by the checks that are being done by GES
to go from one timeline layout to another, this should be doable as
it is a valid use case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3501>
When coloring is in use, those escape codes are going to be created many times
for almost all debug lines.
Don't create plenty of temporary allocations, and instead build the escape code
ourselves statically
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3498>
Because of the asynchronous resolving of mDNS ICE candidates it is
possible that GstWebRTCICE outlives webrtcbin. This in turn prolongs
the lifetime of the GstWebRTCNiceStream objects via refs in
nice_stream_map. Thus the GstWebRTCICETransport objects held in
GstWebRTCNiceStream may be invalid at the time they are accessed by
the _on_candidate_gathering_done() callback since GstWebRTCNiceStream
doesn't take a reference to them. Doing so would create a circular
reference, so instead this commit introduces weak references to the
transport objects and then we can check if the objects are valid before
accessing them.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3502>
And even that vaav1dec doesn't use vabasedec negotiate vmethod, it should align
with the new scheme of using base's width & height for surface size and
output_info structure for downstream display size negotiation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3480>
This vmethod can be used by decoders with the same VA decoder reopen logic:
same profile, chroma, width and height.
Also a new public method called gst_va_base_dec_set_output_state() with the
common GStreamer code for setting the output state, which is always called by
the negotiate vmethod.
In order to do this refactoring, new variables in vabasedec have to be populated
by the decoders:
* width and height define the resolution set in VA decoder. In the case of H264
would be de coded_width and codec_height, or max_width and max_height in AV1.
* output_info is the downstream video info used for negotiation in
gst_va_base_dec_set_output_state().
* input_state, from codec parent class shall be also held by vabasedec
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3480>
There could be multi-GPU setups where the non-first has more
entrypoints than the first one, and the elements names are not
homogeneous, leading to pipeline building error.
This patch add the render node in the elements names when they belong
to the non-first device.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3491>
To fix the warning on Alderlake
vafilter gstvafilter.c:534:gst_va_filter_ensure_filters:<vafilter0>
vaQueryVideoProcFiltersCaps: list argument exceeds maximum number
Increase the number of caps to 16 as vadumpcaps does.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3473>
We want to make it so that we prefer a higher, not lower, number of
channels. Otherwise, this pipeline would convert from 2 to 1 channels:
gst-launch-1.0 audiotestsrc ! audio/x-raw,channels=2 ! opusenc ! queue ! opusdec ! queue ! opusenc ! fakesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3494>
In cases where an invalid input packet is submitted to the decoder we emit a
warning but reporting the flow error upstream would also be useful. This came up
with a case were the application interacts directly with the decoder, using a
mechanism similar to GstHarness.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3463>
Whenever the surface is resized before the stream is negotiated, we endup
with an assertion in libgstvideo.
gst_video_center_rect: assertion 'src->h != 0' failed
This fixes it, by following the style aready in place, which is to ensure
surfaces have a minimum size of 1x1.
Fixes#1139
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3467>
gst-launch-1.0 audiotestsrc ! udpsink host=127.0.0.1
gst-launch-1.0 udpsrc ! audioconvert ! autoaudiosink
would crash with a floating point exception when clipping the input
buffer owing to a division by zero because no caps event was received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3469>
Windows supports various IPC methods but that's completely
different form that of *nix from implementation point of view.
So, instead of adding shared memory functionality to existing
shm plugin, new WIN32 shared memory source/sink elements
are implemented in this commit.
Each videosink (server) and videosrc (client) pair will communicate
using WIN32 named pipe and thus user should configure unique/proper
pipe name to them (e.g., \\.\pipe\MyPipeName).
Once connection is established, videosink will create named shared memory
object per frame and client will be able to consume the object
(i.e., memory mapped file handle) without additional copy operation.
Note that implementations under "protocol" directory are almost
pure C/C++ with WIN32 APIs except for a few defines and debug functions.
So, applications can take only the protocol part so that the application
can send/receive shared-memory object from/to the other end
even if it's not an actual GStreamer element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3441>
Currently in rtp_session_send_rtp(), the existing ntp-64 RTP header
extension timestamp is updated with the actual NTP time before sending
the packet. However, there are some circumstances where we would like
to preserve the original timestamp obtained from reference timestamp
buffer metadata.
This commit provides the ability to configure whether or not to update
the ntp-64 header extension timestamp with the actual NTP time via the
update-ntp64-header-ext boolean property. The property is also exposed
via rtpbin. Default property value of TRUE will preserve existing
behavior (update ntp-64 header ext with actual NTP time).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1580
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3451>
- Based heavily on the existing Qt5 integration however:
- The sharing of OpenGL resources is slightly different
- The integration with the scengraph is a bit different
- Wayland, XCB and KMS have been smoke tested. Android, MacOS/iOS,
Windows may or may not work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3281>
Make sure that group-id of a given play item are made consistent from the
start (sources) and all the way through the output.
This ensures that we can reliably detect that we have switched to the next play
item on the output of decodebin3 (and we can therefore properly free/release it)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When shutting down, we want to remove the urisourcebin blocking probes ... but
we also want to propagate a GST_FLOW_FLUSHING upstream (and not
GST_FLOW_NOT_LINKED) to make the upstream task gracefully stop instead of
posting an error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When `is_selection_done` is called, it checks that all the requested streams are
present in the active stream list ...
... except there could very well be a (about to be removed) stream from the
previous selection present.
Therefore filter the list of streams we add to the message by the streams which
are actually requested.
Fixes issues when switching between different stream types (ex: video-only to
audio-only).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
Previously we tried to route an incoming RTCP FB FIR to the correct ssrc
using the "media source" component of the RTCP FB message. However,
according to RFC5104 (section 4.3.1.2) the "media source" SHALL be set
to 0. Instead the ssrc(s) in use are propagated via the FCI data. Now
a specific GstForceKeyUnit event is sent for every ssrc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3292>
RTP source statistics are tracked for local senders by
treating them as a receiver of their own outbound packets.
Accordingly, track the highest packet seqnum so that the
packets-lost calculation generates a sensible number instead
of always reporting -$number_of_packets_sent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3454>
There was a drm/drm_mode.h included added recently, drm/ is usually
referencing the linux kernel header, but we only requires the libdrm
headers to be installed. On top of this, including drm_mode.h is never
needed as its already included by drm.h.
Fixes#1596
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3452>