The GST_VIDEO_FORMAT_Y410, GST_VIDEO_FORMAT_Y412_LE and GST_VIDEO_FORMAT_Y412_BE
formats in fact are packed formats, which have just 1 plane. But we have special
setting for them rather than using get_single_planar_format_gl_swizzle_order().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5314>
As we don't have any mapping from YUV formats + modifiers to an equivalent
emulated format (e.g. NV12 + modifier -> R8+modifier/RG88+modifier), do no
allow these formats to be used with the indirect DMABuf uploader.
Fixes#2942
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5270>
Fixes a potential GPU stall if an immediately freed texture/buffer is
attempted to be reused immediately by the CPU, e.g. when uploading.
Problematic scenario is this:
1. element does GPU processing reading from texture
2. frees the buffer back to the pool
3. pool acquire returns the just released buffer
4. GPU processing then has to wait for the previous GPU operation to
complete causing a stall
If there was a reliable way to know whether a buffer had been finished
with across all GPU drivers, we would use it. However as that does not
exist, this workaround is to keep the released buffer unusable until the
next released buffer.
This is the same approach as is used in the qml (Qt5) elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5144>
When using `gst_sdp_media_set_media_from_caps` on `application/x-rtp` caps
without `clock-rate` it wrongly reports missing payload type even if `payload`
is present in the caps.
This seems to be a copy&paste error from the error message for missing payload
type.
When using payload=10, both `clock-rate` and some other media properties are
defined by the RTP standard so I was wondering whether I could omit `clock-rate`
and was confused about the error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5250>
Add gst_audio_ring_buffer_set_errored() that will mark the
ringbuffer as errored only if it is currently started or paused,
so gst_audio_ringbuffer_stop() can be sure that the error
state means that the ringbuffer was started and needs stop called.
Fixes a crash with osxaudiosrc if the source element posts
an error, because the ringbuffer would not get stopped and CoreAudio
would continue trying to do callbacks.
Also, anywhere that modifies the ringbuffer state, make sure to
use atomic operations, to guarantee their visibility
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5205>
If a depayloader aggregates multiple RTP buffers into one buffer only
the last RTP buffer was checked for header extensions. Now the
depayloader remembers all RTP packets pushed before a output buffer is
pushed and checks all RTP buffers for header extensions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4979>
Don't call wait_event() at all for gap events, as basesink will
end up waiting for the time that the gap event would be rendered
out at the audio device. There's no need to render it at all,
just treat it as a handy point to resync the audio if needed,
let the ringbuffer render silence, and place the next buffer
into the ringbuffer where it belongs.
The only thing we really need to do is make sure the ringbuffer
and clock are running, and wait for preroll.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2749
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5178>
These 10bit formats are identical to NV12_16L32S, but 64bytes of data is being
prefixed with 16bytes data with four pixels of lower 2bits per byte. For
MT2110T, the lower two bits set so each bytes contains a column of 4 pixels,
also describe as tiled lower 2 bits. MT2110T has been chosen as a name to match
the vendor chosen name. This format is unlikely to exist for other vendors.
For MT2110R, the 2 low bits are in raster order.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3444>
When this flag is enabled, the transform_caps() simply set passthrough
to generate the raw caps. This is not correct, because the sink and
src have different format/drm-format fields.
We already add system memory conversion for DMABuf manner, so no more
need for this flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _nvmm_upload_transform_caps() only simply apply
"memory:NVMM" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
And in _nvmm_upload_accept(), we should only accept the "memory:NVMM"
feature in input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _directviv_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
And in _directviv_upload_accept(), we should only accept the system
memory as input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _gl_memory_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
And in _gl_memory_upload_propose_allocation(), we should only allocate
the allocator and buffer pool for the caps with "memory:GLMemory"
feature.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _upload_meta_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _raw_data_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
We also should recognize the system memory caps in _accept() early, if
the input is not system memory, we just return early.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
Most of the time, the RGB kind formats are OpenGL native supported
format which has only one plane. They can be imported at one shot
using no matter DIRECT or INDIRECT mode.
While YUV kind formats which have multi planes have two ways to import.
They can be DIRECT imported, which requires GL_OES_EGL_image_external
extension. The output format should be RGBA and TARGET should be set
as OES after imported. The other way, they can be INDIRECT imported,
which makes each plane as a texture. In this mode, the imported textures
have different fourcc from the original format. For example, the NV12
format can be imported as a R8 texture for the first plane and RG88
texture for the second plane. The output TARGET should be sets as 2D
in this mode.
When converting sink caps to src caps, we first filter the feature of
"video/x-raw(memory:DMABuf)" and system memory. Then Based on the
external_only flag (INDIRECT mode does not care while DIRECT mode cares),
we transform the drm-format into the gst video format.
When converting src caps into sink caps, we first filter the correct
TARGET(INDIRECT mode contains 2D only while DIRECT mode contains 2D,
OES or both of them) gstructure. Then Based on the include_external flag
(INDIRECT mode always true while DIRECT mode depends on TARGET), we
transform the gst video format into drm-format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
Shader compilation was failing on macOS:
gstglslstage.c:519:_compile_shader:<glslstage1> fragment shader compilation failed:
ERROR: 0:10: 'input_swizzle' : syntax error: Array size must appear after variable name
Co-authored-by: Matthew Waters <matthew@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5123>
The current way of dma caps uses the drm-format to replace the orginal
format field. The absence of format field means it can accept all formats.
It causes problems when clipping with other old DMA or video/x-raw(ANY)
caps, the result will contain both format field and drm-format field,
which is not valid DMA caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4981>
This GST_VIDEO_FORMAT_DMA_DRM is introduced for DMABuf kind feature
usage. It represent the DMA DRM kind memory. And like the ENCODED
format, it should not be interpreted and mapped as normal video format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4981>
The drop-frame rules are specified in “SMPTE ST 12-3:2016” and are
consistent with the traditional ones:
“
To minimize fractional time deviation from real time, the first two
super-frame numbers (00 and 01) shall be omitted from the count at the
start of each minute except minutes 00, 10, 20, 30, 40, and 50. Thus the
first eight frame numbers (0 through 7) are omitted from the count at
the start of each minute except minutes 00, 10, 20, 30, 40, and 50.
”
Where “super-frame” is a group of 4 frames for 120 FPS.
Fixes#2797
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5028>
The current implementation copies metas without checking if the buffer
is writable.
The operation that needs to be done, replacing the input buffer and
copying the metas, is only part of that process. We create a new function
that does both.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4912>
This reverts commit 893e4ed0dd.
This caused regressions in existing elements which override/set things
like QoS and such in their own init functions. If the base class does
this in ::constructed() now it will override the subclass settings
again with its own, which can have unintended side-effects.
Case in point is gdkpixbufsink which disabled QoS there, and this
patch would reliably make the unit test fail in valgrind because
now frames are dropped because of QoS (when QoS should really be
disabled).
Fixes#2794
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5006>
When gst_element_set_state is called in _setup_locked and errors, the
callback is already processed before we reach handle_current_async, and
the timer is started even though it's finished processing, which results
in a NULL pointer crash later in async_timeout_cb.
To fix this, we check that it's still processing before calling
handle_current_async.
Fixes#1683
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4936>
This will cause an integer overflow a little bit further down because we
allocate a bit more memory to allow for a NUL-terminator.
The caller should've avoided passing that much data in already as it's
not going to be a valid image and there's likely not even that much data
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4894>
glfilter will unref input buffer after _transform() call immidiately,
but gpu may still reading input buffer for rendering because gl
api is executed async. Need hold reference for input buffer by
adding parent meta to output buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4801>
Appsink will unref prev sample in dispose function. Which is later
when V4L2 video decoder link with appsink as V4L2 video decoder
will close V4L2 device fd during GST_STATE_CHANGE_READY_TO_NULL.
If the video buffer return to V4L2 video decoder after the decoder
closed V4L2 device fd, V4L2 can't release the video frame buffer
which allocated with MMAP mode as application can't call
VIDIOC_REQBUFS 0 to release the video frame buffer by V4L2 driver.
The memory of the video frame will leak.
Unref the gstbuffer in stop() function, so V4L2 video decoder
can received all video frame buffers and release it before close
V4L2 device fd.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4818>
This patch adds gst_egl_image_from_dmabuf_direct_target_with_dma_drm() and
add gst_egl_image_from_dmabuf_with_dma_drm() functions
New function gst_egl_image_from_dmabuf_direct_target_with_dma_drm(), where
gst_egl_image_from_dmabuf_direct_target() is a specialization of the first.
And gst_egl_image_from_dmabuf() is a specialization of new function
gst_egl_image_from_dmabuf_with_dma_drm()
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
It internally uses gst_gl_context_egl_get_dma_formats() instead of fetching
modifiers by itself.
Thus gst_egl_image_check_dmabuf_direct() is a decorator of this new function.
Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
By calling the internal function gst_gl_context_egl_fetch_dma_formats() the an
array of structures holding a DMA fourcc format and its modifiers (another array of
structure holing modifier and if it's external only) will be stored.
Users would call gst_gl_context_egl_get_format_modifiers() to get the array of
modifiers of a specific DMA fourcc format.
Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
When the alignment contains nothing, all its fields are 0 and always
can be satisfied. So there is no need to validate it in this case.
And there are a lot of places just setting this alignment to default
all zero value, this validation generates lots of warnings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4674>
Add d3d11 conversion path to make gst_video_convert_sample() work
for GstD3D11Memory.
Note that just adding "d3d11download" to the exisitng code is
suboptimal from GstD3D11 point of view because:
* d3d11convert element can support crop/colorspace-conversion/scale
all at once while existing software pipeline needs intermediate steps
for the conversion
* "Process everything on GPU then download it to CPU memory" would be likely
faster than "download GPU memory to CPU then processing it on CPU"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2715>
Subclasses may want to override the pad template with different formats
or with a different pad subclass.
The original beahviour is still available by calling
gst_gl_mixer_class_add_rgba_pad_templates() in _class_init() of the
subclass.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
Upon creating a window, glimagesink and osxvideosink now set the policy to
NSApplicationActivationPolicyRegular, which lets us show an icon in the Dock
for convenience and appear in the top menu bar like other apps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4573>
This is no longer needed since the introduction of `gst_macos_main()` in 1.22.
Before that existed, we had a patch for GLib in Cerbero, which did work but made it
impossible to update GLib at all. The code being removed was a fail-safe in case of
running without said patch being applied. It's no longer needed, since for macOS
we just wrap our GStreamer with an NSApplication using `gst_macos_main()`.
Warnings will be displayed if no NSApp/NSRunLoop is found wherever needed,
pointing the user towards using the new API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4366>
The proxy and queue are created in the gst_gl_window_wayland_egl_open()
function and will be recreated on open. This leaks both objects, the
wayland client documentation mentions that they should be destroyed
using the appropriate destroy functions.
Found during valgrind memory leak testing, these blocks were marked as
definitely lost.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4354>
The first serialized events that can be send on a src pad are a CAPS and then a
SEGMENT event.
When handling events from user in appsrc, we used to send a segment
automatically if the SEGMENT has not been sent yet.
This breaks if the CAPS event was not send either as we were now sending
a SEGMENT before the CAPS.
Fix this by delaying such events until the CAPS has been configured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
Adding propose_allocation is to meet the requirement of Application to
request buffers. Application sometimes need to create buffer pool
and request buffers to maintain buffer management itself, and Gstreamer plugin
import Application's buffers to use. So, add propose_allocation in
appsink like waylandsink and kmssink etc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4185>
In gst_video_info_dma_drm_to_caps() the caps are newly created, so there's no
need for make it writable. In gst_video_info_dma_drm_from_caps() a copy of the
caps is done, which implies a gst_caps_make_writable().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4195>
This allow allocating memory from any DRM driver that supports this
method. It additionally allow exporting DMABuf. This allocator depends
on libdrm and will be stubbed if the dependency is missing. This is derived
from kmssink dumb allocator.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
These parameters are not actually `out` parameters but must
be allocated and zero-initialized by the calling function.
Marking them as `out caller-allocates` will cause memory
corruptions when calling these APIs from e.g., Python code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4051>
Do not store cached EGL images in GstMemory QData. Instead, use a
per-DmabufUpload GHashTable to store cache entries with a weak
reference to the GstMemory.
This allows two glupload elements on separate tee branches to have
their own EGL image cache. For this pipeline:
gst-launch-1.0 v4l2src ! tee name=t \
t. ! queue ! glupload ! fakesink
t. ! queue ! glupload ! fakesink
this gets rid of the occasional critical error message:
GStreamer-CRITICAL **: 08:26:33.194: gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3880>
If we have caps then we can only set exactly those caps, if we have no
caps yet then negotiating anything is not very meaningful because the
caps are defined by the application and not downstream.
Avoids, among other things, an unnecessary allocation query and spurious
useless caps being set before the first buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3757>
We create a new context in `gst_gl_context_create_thread()` and then
activate it on the current thread. Thereafter we assume that the
current thread continues to be the active thread for that context and
call `gst_gl_context_fill_info()` which asserts that the current
thread is the active thread.
However, if at the same time a different thread calls
`send_message_async()`, it will call into
`gst_gl_window_cocoa_send_message_async()` which will schedule the
message to be invoked using GCD. That anonymous function will also
call `gst_gl_context_activate()`, which creates a race, which can lead
to:
```
gst_gl_context_fill_info: assertion 'context->priv->active_thread == g_thread_self ()' failed
```
Fix it by using `gst_gl_context_thread_add()` to invoke `fill_info()`
on the context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3732>
This should fix pipelines such as this one to work as expected
... ! opusenc ! capsfilter caps='audio/x-opus,
channels=1; audio/x-opus, channels=2' ! ...
The expectation is that the encoder will propose the first structure
before the second one to the source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3673>
gst-launch-1.0 audiotestsrc ! udpsink host=127.0.0.1
gst-launch-1.0 udpsrc ! audioconvert ! autoaudiosink
would crash with a floating point exception when clipping the input
buffer owing to a division by zero because no caps event was received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3469>
Currently, when rtspsrc property add-reference-timestamp-metadata=true,
a downstream rtph264depay element will attach multiple copies of the
same GstReferenceTimestampMeta to the depayloaded media buffers. This
can have signficant performance impacts further downstream in a pipeline
like the following:
rtspsrc add-reference-timestamp-metadata=true ! rtph264depay ! h264parse ! ... ! rtph264pay ! ...
For example, if there are 10 packet buffers for a frame of RTP H.264
video, each of those packet buffers will contain the same reference
timestamp meta. The rtph264depay element will then attach all 10
metadata to the depayloaded frame. And then later when we payload the
frame buffer again for proxying, we now have 10 more buffers each with
10 instance of the same metadata. Allocating/deallocating 100+ instances
of metadata @ 30fps for multiple streams has a pretty large performance
impact.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1578
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3431>
The tile width in pixel is not always available. Notably for
8L128 10bit format, the tile is 8x128 bytes, and the pixel
format is fully packed. That means that the tile contains at
least 6 pixels per line, but it also hold some bits of the
pixel from the same line on the previous or next tile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
In current tile representation, only tiles with power of two
width and height in bytes are supported. This limitation
prevents adding more complex tiles formats.
In this patch, we deprecate tile_ws and tile_hs from GstVideoFormatInfo and
replace if with an array of GstVideoTileInfo. Each plane tiles are then
described with their pixels width/height, line stride and total size.
The helper gst_video_format_info_get_tile_sizes() that depends on the
deprecated API is also being removed. This can simply be removed as it wasn't
in any stable release yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
Setting force_live lets aggregator behave as if it had at least one of
its sinks connected to a live source, which should let us get rid of the
fake live test source hack that is probably present in dozens of
applications by now.
+ Expose API for subclasses to set and get force_live
+ Expose force-live properties in GstVideoAggregator and GstAudioAggregator
+ Adds a simple test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3008>
When a tile format is padded and imported as DMABuf, the stride
contains the information about the actual width and height in
number of tiles. This information is needed by the detiling shader
in order accuratly calculate the location of pixels. To fix that,
we also copy the offset and strides into the otuput format and
the converter will ensure that the shader is recompiled whenever
the stride changes.
This fixes video corruptions observed when decoding on MT8195
with videos that aren't not aligned to 64bytes in width.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3365>
Posting latency messages causes a full and potentially expensive latency
recalculation of the pipeline. While subclasses should check whether the latency
really changed or not before calling this function, we ensure that we do not
post such messages if it didn't change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3282>
duplicate symbol '__invoke_on_main' in:
/Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstvulkan-1.0.a(cocoa_gstvkwindow_cocoa.m.o)
/Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstgl-1.0.a(cocoa_gstglwindow_cocoa.m.o)
ld: 1 duplicate symbol for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Also make the same change in iOS for consistency.
Continuation of https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1132
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3242>
This allows correct handling of wrapping around backwards during the
first wraparound period and avoids the infamous "Cannot unwrap, any
wrapping took place yet" error message.
It allows makes sure that for actual timestamp jumps a valid value is
returned instead of 0, which then allows the caller to handle it
properly. Not having this can have the caller see the same timestamp (0)
for a very long time, which for example can cause rtpjitterbuffer to
output the same timestamp for a very long time.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1500
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3202>
The implementation was inconsistent between create and destroy. EGLImage
creation and destruction is requires for EGL 1.5 and up, while
otherwise the KHR version is only available if EGL_KHR_image_base
feature is set. Not doing these check may lead to getting a function
pointer to a stub, which is notably the case when using apitrace.
Fixes#1389
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2925>
We need to call this to register the MusixBrainz tags before we use
them in an XMP schema.
Fixes this critical when attempting to run jpegparse on a JPEG
containing MusicBrainz XMP tags:
GStreamer-CRITICAL **: 20:41:07.885: gst_tag_get_type: assertion 'info != NULL' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3092>
The purpose of a deep buffer copy is to be able to release the source
buffer and all its dependencies. Attaching the parent buffer meta to
the newly created deep copy needlessly keeps holding a reference to the
parent buffer.
The issue this solves is the fact you need to allocate more
buffers, as you have free buffers being held for no reason. In the good
cases it will use more memory, in the bad case it will stall your
pipeline (since codecs often need a minimum number of buffers to
actually work).
Fixes#283
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2928>
when creating a profile from a discoverer info.
There is no justification for the existing code, and talking with
Thibault he cannot remember why the sort was in place.
On the other hand, this allows GES users to not have to implement
a callback for the select-tracks-for-object callback when using
it to trim a single clip, which the output profile was built from:
track elements will be placed in the appropriate track by default,
that is the one that will be connected to the matching profile.
For multi-clip timelines, the situation doesn't change, users will
still have to implement a callback and do the leg work of placing
track elements (if any) in a matching track (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
chroma-format, bit-depth-chroma, bit-depth-luma are all informative
fields set by the H265 and H265 parser upon receiving an SPS.
They shouldn't be constrained downstream of the parser, instead
if a user wants those to ultimately match certain values they
should do so by constraining a profile.
In this case however, we also always remove the profile constraint
in order to let encoders pick a suitable one as a function of the
raw input video format and their own capabilities.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.
In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.
Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.
We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.
Relevant upstream merge requests / issues:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
It is entirely possible for the cancellable to be cancelled (and freed)
in gst_rtsp_connection_flush() while there may be an ongoing read/write
operation.
Nothing prevents gst_rtsp_connection_flush() from waiting for the
outstanding read/writes.
This could lead to a crash like (where cancellable has been freed
within gst_rtsp_connection_flush()):
#0 0x00007ffff4351096 in g_output_stream_writev (stream=stream@entry=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6af950, cancellable=cancellable@entry=0x7fff300288a0, error=error@entry=0x7ffe2c6af958) at ../subprojects/glib/gio/goutputstream.c:377
#1 0x00007ffff44b2c38 in writev_bytes (stream=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6afb90, block=block@entry=1, cancellable=0x7fff300288a0) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:1320
#2 0x00007ffff44b583e in gst_rtsp_connection_send_messages_usec (conn=0x7fff30001370, messages=messages@entry=0x7ffe2c6afcc0, n_messages=n_messages@entry=1, timeout=timeout@entry=3000000) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:2056
#3 0x00007ffff44d2669 in gst_rtsp_client_sink_connection_send_messages (sink=0x7fffac0192c0, timeout=3000000, n_messages=1, messages=0x7ffe2c6afcc0, conninfo=0x7fffac019610) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:1929
#4 gst_rtsp_client_sink_try_send (sink=sink@entry=0x7fffac0192c0, conninfo=conninfo@entry=0x7fffac019610, requests=requests@entry=0x7ffe2c6afcc0, n_requests=n_requests@entry=1, response=response@entry=0x0, code=code@entry=0x0) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:2845
#5 0x00007ffff44d3077 in do_send_data (buffer=0x7fff38075c60, channel=<optimized out>, context=0x7fffac042640) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:3896
#6 0x00007ffff4281cc6 in gst_rtsp_stream_transport_send_rtp (trans=trans@entry=0x7fff20061f80, buffer=<optimized out>) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream-transport.c:632
#7 0x00007ffff4278e9b in push_data (stream=0x7fff40019bf0, is_rtp=<optimized out>, buffer_list=0x0, buffer=<optimized out>, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2586
#8 check_transport_backlog (stream=0x7fff40019bf0, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2645
#9 0x00007ffff42793b3 in send_tcp_message (idx=<optimized out>, stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2741
#10 send_func (stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2776
#11 0x00007ffff7d59fad in g_thread_proxy (data=0x7fffbc062920) at ../subprojects/glib/glib/gthread.c:827
#12 0x00007ffff7a8ce2d in start_thread () from /lib64/libc.so.6
#13 0x00007ffff7b12620 in clone3 () from /lib64/libc.so.6
Fix by adding a cancellable lock and returning an extra reference used
across all read/write operations. gst_rtsp_connection_flush() can free
the in-use cancellable and it will no longer affect any in progress
read/write.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2799>
4x downscaling of chroma with co-sited chroma has never worked
it seems.
Fixes incorrect videotestsrc output and videoconvert conversions
to Y41B, YUV9, YVU9 and IYU9 with co-sited chroma.
e.g.
gst-launch-1.0 videotestsrc ! video/x-raw,format=Y41B,width=1280,height=720 ! \
videoconvert ! autovideosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2789>
SMPTE 170M and 240M use the same RGB and white point coordinates
and therefore both primaries can be considered functionally
equivalent.
Also, some transfer functions have different name but equal
gamma functions. Adding another colorimetry compare function
to deal with thoes cases at once
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765>
Raw memory upload should always be the least preferred input
caps, only added by the raw memory uploader as the last thing
in the caps.
Caps negotiation should still choose raw data when it needs to,
and other upload methods that can accept raw data buffers will still do so.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2725>
This reverts commit 6f9ae5d758.
The _transform_caps() function can't tell the difference
between the caller wanting to know the output caps
for the current method, or all possible output caps. If
it includes caps for all possible methods, glupload can
end up negotiating and sending the wrong output caps
downstream.
Partially reverts !2687Fixes#1310
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2699>
If no filter caps are provided with a caps query, always
generate a full set of all caps from all upload methods,
not just the configured one. This is needed to handle
renegotiation when dealing with raw sysmem caps - as the upload
method might accept raw sysmem caps, but only the raw data
uploader adds those to the caps query.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
This reverts commit f3292dc156.
Only the raw data uploader should add sysmem caps to the
actual caps query, because we want them to be at the
lowest priority. If upstream does select to send raw
caps, then the correct upload method will still
be chosen because the accept_caps implementation
will accept them
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
When checking if we need to reconfigure when uploading, check
specifically the output caps of the current method will
result in compatible/incompatible caps, not the full set
of output caps from all upload methods.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
