Sebastian Dröge
cb1f2f2294
autoconvert: Cache events and send them downstream once an element was selected
2009-08-09 15:20:48 +02:00
Sebastian Dröge
abe33a5526
autoconvert: Small cleanups
2009-08-09 14:55:26 +02:00
Sebastian Dröge
6115e0cb0e
mpegtsdemux: Don't answer the SEEKING query if we don't know the answer yet
...
A bitrate!=-1 is required for seeking but the bitrate is only calculated
after the second PCR was read.
Fixes bug #590446 .
2009-08-08 22:14:53 +02:00
Sebastian Dröge
282479b443
videoparse: Only provide very fundamental caps in the pad template
...
We can't easily know which caps will can be used because we rely on
libgstvideo's support for video formats.
2009-08-08 10:30:11 +02:00
Sebastian Dröge
5c11f80c04
rawparse: Small cleanups and implement SEEKING query
2009-08-08 10:27:52 +02:00
Sebastian Dröge
60a5d37683
audioparse: Small cleanups
2009-08-08 09:08:16 +02:00
Sebastian Dröge
8433f7a9c6
videoparse: Use libgstvideo for everything instead of our own calculations
...
Also make RGB usage easier by providing xRGB, RGBx, etc. formats
instead of requiring to set red_mask and friends.
2009-08-08 09:08:16 +02:00
Josep Torra
9861908926
mpegtsdemux: fix a memory leak
2009-08-07 19:12:26 +02:00
Josep Torra
1a9b54b781
mpegtsdemux: added VC1, EAC3 and LPCM related to blueray/hdmv
2009-08-07 19:00:23 +02:00
Josep Torra
da95f4a873
mpegpsdemux: added caps for AAC and fixed playback of a clip with LPCM
2009-08-07 18:35:42 +02:00
Josep Torra
3c22fb611b
mpegpsdemux: improved demuxer performance
...
Increased performance doing pull_range in blocks of 32Kb instead of 4Kb.
Caching the value of gst_adapter_available instead of calling it 3 times.
Added some comments with the header descriptions.
Peek enough data to avoid a corner case where could be readed data outside
the buffer.
Speed up some more inlining some functions and keeping another stream pointer
list to be used as iterator.
Sprinkle branch prediction macros accross the code.
Handling the seeking with flush in pull mode in the proper way.
2009-08-07 18:17:28 +02:00
Mark Nauwelaerts
222322e7f3
baseparse: prevent infinite loop when draining
2009-08-07 13:09:24 +02:00
Mark Nauwelaerts
1f2a0d3b3d
baseparse: fix minor memory leak
2009-08-07 13:09:20 +02:00
Mark Nauwelaerts
1f9525d821
flacparse: sync baseparse (some more)
2009-08-07 13:09:15 +02:00
ric
15b29bb834
rtpsource: avoid buffer leak on bad seqnum
...
Fixes #590797
2009-08-06 19:27:20 +02:00
Sebastian Dröge
3f6e84ec61
mpeg[pt]sdemux: Fix SEEKING query
...
Send the BYTES based query downstream, not the orignal one.
2009-08-05 09:36:00 +02:00
Jan Urbanski
5a596e67da
qtmux: Don't require endianness field for 8 bit raw audio
...
Fixes bug #590360 .
2009-08-04 12:58:35 +02:00
Tim-Philipp Müller
2e7b6e44db
flacparse: remove internal bitreader and bytereader now that these are in libgstbase
2009-07-31 16:36:54 +01:00
Tommi Myöhänen
b658293925
outputselector: check for pending srcpad in _get_property()
...
If there is a pending srcpad, return it instead of active srcpad
in gst_output_selector_get_property() function.
2009-07-31 14:07:31 +03:00
Tommi Myöhänen
89788ddc1f
camerabin: Set camerasrc to READY state instead of PAUSED when acquiring allowed caps
2009-07-31 14:07:24 +03:00
Thiago Santos
88e399aac2
rtpasfpay: set padding field to 0 on rtp asf packets
...
The ASF RTP spec demands that packets have their padding removed
and the padding size field set to 0 for packets when puting them
inside the RTP packets
2009-07-31 00:19:19 -03:00
Thiago Santos
7583bf6813
asfmux: Set video stream seekable property to true
...
Video stream always have indexes, so they are all seekable
2009-07-30 10:33:05 -03:00
Thiago Santos
c271548aab
asfmux: Removing useless TODOs
...
After testing in windows and linux, this audio correction field
made no difference so far. All example files I got only had
zeroes in this field
2009-07-30 10:33:05 -03:00
Thiago Santos
80196e1bb8
asfmux: Fixes video stream properties object
...
Fixes stream properties object creation for video content
2009-07-30 10:33:04 -03:00
Thiago Santos
d86de48fa1
asfmux: accept pad requests a little longer
...
asfmux now start rejecting pad requests after it pushes the first
buffer, before this, it was rejecting after going to paused
2009-07-30 10:33:04 -03:00
Thiago Santos
7dd441f8f5
asfmux: adds support to vc-1 streams
2009-07-30 10:33:03 -03:00
Olivier Crête
0672f2d9b2
rtpmux: Remove empty finalize
2009-07-29 17:24:59 -04:00
Thiago Santos
fb624bd416
asfmux: Forcing pad names to be video_%02d and audio_%02d like
2009-07-28 21:37:04 -03:00
Wim Taymans
9232e2278c
rtpsource: allow for NULL caps on buffers
...
Add the NULL caps check where it matters and also cover another case of
potential NULL caps.
Fixes #590030
2009-07-28 18:18:20 +02:00
Olivier Crête
03348629ce
rtpsource: Incoming buffers do not always have caps
2009-07-28 18:16:12 +02:00
Tommi Myöhänen
2d9bdb933d
camerabin: photo iface setter functions return TRUE when used in NULL state
...
We cache the values and apply then when possible.
2009-07-28 09:53:22 +03:00
Tommi Myöhänen
01a7532900
camerabin: do not put video pipeline into READY when start recording camerabin: remember probe IDs and disconnect them when destroying pipelines
2009-07-28 09:53:22 +03:00
Wim Taymans
ffe90f81a4
rtpsession: avoid doing lip-sync in BYE
...
When we get a BYE packet, don't do lip-sync with the SR inside because some
senders have trouble constructing valid SR packets after BYE.
2009-07-27 15:49:54 +02:00
Wim Taymans
9b1bdac9cc
rtpbin: don't do lip-sync after a BYE
...
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
2009-07-27 13:17:20 +02:00
Wim Taymans
7bd35cb8c7
rtpbin: only reconsider once for BYE
...
When iterating the sources of a BYE packet, don't signal a reconsideration for
each of them but signal after we handled all sources.
2009-07-27 12:43:02 +02:00
Thiago Santos
2641cd9d94
asfmux: Adds new plugin asfmux
...
Adds the brand new asfmux plugin, containing 3 elements:
asfmux, rtpasfpay and asfparse. This plugin was developed
as a GSoC 2009 project, with David Schleef as the mentor and
Thiago Santos as the student.
2009-07-24 14:52:28 -03:00
Sebastian Dröge
da7263b51f
mpegdemux: Remove some backward compatibility code
...
Also we always require liboil so use it unconditionally.
2009-07-23 09:58:38 +02:00
Sebastian Dröge
d8b285d7fd
mpegdemux: Implement query type function for the src pads
2009-07-23 09:53:29 +02:00
Olivier Crête
2abe07f963
rtpsession: Free conflicting addresses on finalize
2009-07-22 14:19:57 -04:00
Olivier Crête
d555d570e6
rtpmux: Free the pad private data on pad release
...
Free the pad private data on pad release instead of using a weak ref,
which is not thread safe. Also, lock the content of the pad private using the element's
object lock.
2009-07-22 14:19:57 -04:00
Tim-Philipp Müller
277327e4e5
docs: add pcapparse to docs
2009-07-22 11:45:56 +01:00
Stefan Kost
5e6edd7e7b
mpegdemux: don't add a base_time==-1 to segment positions
...
Fixes assertion about newsegment with start=-1.
2009-07-22 00:33:22 +03:00
Stefan Kost
43657ef1f3
camerabin: small speedup in software zoom
...
Force crop on even pixel position to avoid slowpath in crop & scale.
2009-07-21 17:52:33 +03:00
Sebastian Dröge
86af4924cc
mxfdemux: Implement SEEKING query
2009-07-21 13:51:20 +02:00
Sebastian Dröge
95e50d3598
mpegpsdemux: Implement SEEKING query
...
Fixes bug #588944 .
2009-07-21 13:39:21 +02:00
Sebastian Dröge
1f88ceeba8
mpegtsdemux: Implement SEEKING query
...
Partially fixes bug #588944 .
2009-07-21 13:33:58 +02:00
Sebastian Dröge
e3f08983aa
mpegtsparse: Free the PMT before setting a new one
2009-07-21 13:18:10 +02:00
Mikael Magnusson
6233d1c950
mpegtsparse: Remove old PES PIDs when receiving PAT tables
...
Fixes bug #583470 .
2009-07-21 13:18:09 +02:00
Stefan Kost
a80921e334
camerabin: log formats in preview image conversion
2009-07-20 16:42:44 +03:00
Stefan Kost
64457575e7
camerabin: remove unused variable assignment
...
Result is not needed here, but variable is used later on. Also remove double new
lines in function.
2009-07-20 16:42:43 +03:00
Stefan Kost
ebc417f769
fpsdisplaysink: check query return result before using it
2009-07-20 16:42:43 +03:00
Tim-Philipp Müller
114425d7ee
real: differentiate between 'module does not exist' and genuine module opening errors
...
Don't log a GST_ERROR if one of the codec modules we were looking for
doesn't exist. That's not a genuine error, but somewhat expected.
2009-07-19 15:42:10 +01:00
Matijs van Zuijlen
01200712ea
mpegdemux: Fix integer overflow
...
This breaks playback of files >4 GB as the offset was
a guint before. Changing it to a guint64 fixes this.
2009-07-18 08:44:58 +02:00
Stefan Kost
4ef918df28
camerabin: use gst_caps_replace instead of separate calls
...
This fixes setting snapshot caps back to NULL also.
2009-07-17 15:50:19 +03:00
Zaheer Merali
3d44d92630
mpegtsparse: add component tag to the video component structure in eit
2009-07-17 09:40:12 +01:00
Aleksey Yulin
2db8d6ea0b
mpegtsdemux: Don't use PIDs > MPEGTS_MAX_PID
...
The mpegtsdemux streams array only has MPEGTS_MAX_PID entries
and accessing one afterwards will result in crashes.
Fixes bug #575672 .
2009-07-16 19:52:22 +02:00
Josep Torra
6303b0e80d
pesfilter: Permit unbounded packets for 0xfd (extended stream id).
...
Added parsing of PES extension related data.
Fixes some VC1 related issues.
2009-07-16 16:05:41 +02:00
Zaheer Merali
1a6cd35c50
mpegtsparse: add component tag to structure for component message
2009-07-15 18:27:39 +01:00
Stefan Kost
aace8e130f
camerabin: use nonbuffered io to save memcopies
...
We write large blocks anyway, so no extra buffering please. Also use one
g_object_set to set multiple properties on same object.
2009-07-15 17:44:10 +03:00
Stefan Kost
c73bf8e4b6
camerabin: track todo items
2009-07-15 12:20:17 +03:00
Stefan Kost
ff3ef9a92a
camerabin: leave image/video bin in ready when changing mode
2009-07-15 11:20:30 +03:00
Sebastian Dröge
27d6b25695
amrparse: Sync baseparse changes
2009-07-14 14:10:55 +02:00
Sebastian Dröge
8e1c21f309
aacparse: Add function for the baseparse subclass to push buffers downstream
...
Also handle the case gracefully where the subclass decides to drop
the first buffers and has no caps set yet. It's still required to
have valid caps set when the first buffer should be passed downstream.
2009-07-14 14:10:03 +02:00
Sebastian Dröge
493535dd89
baseparse: Fix seek event leaking
2009-07-14 14:10:03 +02:00
Sebastian Dröge
b870322686
shapewipe: Add BGRA support for video in/output
2009-07-08 17:59:29 +02:00
Sebastian Pölsterl
fc80a08e44
mpegtsdemux: Fix double free
...
The hash table already makes sure that the stream is correctly
free'd when elements are removed.
Fixes bug #587819 .
2009-07-08 15:27:48 +02:00
Miguel Àngel Farré
4266fd443a
mpegtsparse: parse component tag
2009-07-08 10:34:02 +01:00
Miguel Àngel Farré
c90fccd986
mpegtsparse: parse carousel identifier descriptor
2009-07-08 10:33:44 +01:00
Zaheer Abbas Merali
66a5549094
mpegtsparse: add parsing of data broadcast descriptors
2009-07-08 10:33:29 +01:00
Zaheer Abbas Merali
2e6de387ac
mpegtsparse: fix sdt parsing.
...
fix parsing of everything for each service from eit schedule flag on and also
add a running-status parameter to the bus message structure.
2009-07-02 15:58:00 +01:00
Sebastian Dröge
8fade13db1
shapewipe: Add support for ARGB video input/output
2009-07-02 11:27:31 +02:00
Wim Taymans
80856964b5
rtpbin: use new method for netaddress to string
2009-07-01 12:55:03 +02:00
Wim Taymans
4bc5e2f61e
rtpbin: do better cleanup of the src ghostpads
...
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes #561752
2009-06-29 18:48:33 +02:00
Wim Taymans
6eb961e510
rtpsession: add a comment
2009-06-29 16:38:39 +02:00
Wim Taymans
f9cc6b7b1c
rtpbin: add SDES property
...
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-06-29 16:37:54 +02:00
Wim Taymans
ed6002ada8
rtpbin: add SDES property that takes GstStructure
...
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-06-29 16:21:05 +02:00
Wim Taymans
5a50a4138e
rtpbin: removed old gstrtpclient
2009-06-29 16:02:09 +02:00
Sebastian Dröge
0647d963ef
frei0r: Correctly clean up elements to be reusable and not leak memory
2009-06-29 12:02:19 +02:00
Sebastian Dröge
72fca8a828
frei0r: In the filter plugins create the frei0r instances in create() before playback starts
2009-06-29 11:59:13 +02:00
Sebastian Dröge
0de4e9df00
frei0r: In the mixer plugins create the frei0r instances in create() before playback starts
2009-06-29 11:56:59 +02:00
Sebastian Dröge
166ee21b5b
frei0r: In the src plugins create the frei0r instances in create() before playback starts
2009-06-29 11:54:26 +02:00
Sebastian Dröge
867d51fb31
frei0r: Use fixed caps on the filter pads
...
This is required because we have to create a new frei0r
instance for any caps changes and the instances can have history.
Just creating a new instance during playback can result in bad output
right after the caps change.
2009-06-29 11:50:44 +02:00
Sebastian Dröge
cd6422a372
frei0r: Set the default property values correctly
2009-06-27 09:52:22 +02:00
Stefan Kost
3d6d1c2ed2
camerabin: code cleanups
...
Downgrade a WARNING to INFO. Use a bit more compact code. Add a fixme comment.
2009-06-26 18:36:26 +03:00
Stefan Kost
59bfe55110
camerabin: just ref caps, we don't need a writable copy
2009-06-26 18:36:25 +03:00
Stefan Kost
df14237dba
camerabin: no need to ref and unref this temporarily
2009-06-26 18:36:25 +03:00
Stefan Kost
c9208657b1
camerabin: don't leak sink_caps if they would be any-caps
2009-06-26 18:36:25 +03:00
Stefan Kost
a5e9a5eebc
camerabin: don't leak preview images
2009-06-26 18:36:25 +03:00
Stefan Kost
9a692cf602
camerabin: don't leak viewfinder-caps
2009-06-26 18:36:25 +03:00
Stefan Kost
2f93fb8c73
camerabin: insert a few blank lines for readability
2009-06-26 18:36:24 +03:00
Stefan Kost
4ab9f800a8
camerabin: don't leak messages and element refs in preview
2009-06-26 18:36:24 +03:00
Changwoo Ryu
1ab8c008f3
freeze: don't build plugin static lib
...
Pass --tag=disable-static to libtool like we do for other plugins.
Fixes #587023 .
2009-06-26 09:34:11 +01:00
Stefan Kost
e673b099d4
camerabin: don't leak requestpads
...
Requestpads need to be released and unreffed. Add a comment in one case where
we intentionaly don't unref.
2009-06-25 19:34:28 +03:00
Mark Nauwelaerts
8241b05038
capssetter: import element into -bad
2009-06-25 18:10:42 +02:00
Edward Hervey
1bb23517fe
qtmux: Remove unused variable.
2009-06-25 08:38:21 +02:00
Edward Hervey
d6ff39bb35
qtmux: Fix debug statement.
2009-06-25 08:38:10 +02:00
Lasse Laukkanen
c3abf1b267
camerabin: buffer-alloc support fixes to image and video bin handling
...
Keep image bin in PAUSED state in image mode except when processing/saving (PLAYING/READY).
Change output-selector to view finder before setting video bin to READY.
Fix filename sent with img-done signal.
2009-06-24 19:01:01 +03:00
Lasse Laukkanen
18e7091238
camerabin: fix setting mute when video bin elements haven't been created
2009-06-24 18:58:17 +03:00
Lasse Laukkanen
8a39d28002
camerabin: set image bin to PAUSED when starting capture
...
Set image bin to PAUSED also when starting capture using photography
interface.
2009-06-24 18:58:16 +03:00
Lasse Laukkanen
a265e4d2b3
camerabin: leave v4l2camsrc "capture-mode" as video mode when pausing
2009-06-24 18:58:16 +03:00
Sebastian Dröge
6ba122834a
shapewipe: Correctly handle 0/1 fps
2009-06-23 18:24:00 +02:00
Stefan Kost
74f065ee75
camerabin: add local include dir to CFLAGS
2009-06-22 23:49:03 +03:00
Stefan Kost
a971391906
camerabin: code cruft removal and debug logs
...
Remove unused code. Add lots of debug loging. Change comments for local
functions to not use /** gtk-doc start style.
2009-06-22 13:41:16 +03:00
Wim Taymans
1cf9f2d497
h264parse: detect and fix for bad NALU sizes
...
when in AVC mode a nalu size seems invalid, assume the NALU has the size of the
available data instead of looping forever.
Fixes #586354
2009-06-22 11:19:07 +02:00
Carl-Anton Ingmarsson
426a6eaba9
vdpau: change element rank for testing purposes
...
set mpegvideoparse rank to primary and vdpaumpegdec to primary - 1 to get vdpaumpegdec
correctly plugged into playbin
2009-06-20 15:21:40 +01:00
Branko Subasic
c70dbe94b5
rtpbin: add support for buffer-list
...
Add support for sending buffer-lists.
Add unit test for testing that the buffer-list passed through rtpbin.
fixes #585839
2009-06-19 19:10:35 +02:00
Mark Nauwelaerts
11dc33bea0
aacparse: ADIF: do not send bogus timestamps, leave to downstream (decoder)
2009-06-19 18:13:09 +02:00
Mark Nauwelaerts
e29be2546f
qtmux: only use (64-bit) extended (mdat) atom size if needed. Fixes #585319 .
2009-06-19 18:13:06 +02:00
Mark Nauwelaerts
5b672ed441
qtmux: set default movie timescale to microsecond units
2009-06-19 18:13:03 +02:00
Mark Nauwelaerts
d4b5c6ae5b
qtmux: compress/optimize stsc writing
2009-06-19 18:13:00 +02:00
Mark Nauwelaerts
1aeb7d9b54
qtmux: add 3GP style tagging (and refactor appropriately)
2009-06-19 18:12:58 +02:00
Mark Nauwelaerts
b0c0651d7c
qtmux (and variants): handle pixel-aspect-ratio. Fixes #584358 .
2009-06-19 18:12:54 +02:00
Tim-Philipp Müller
98292e9efd
Fix previous commit so that things still work with debug logs enabled
2009-06-19 17:04:48 +01:00
Tim-Philipp Müller
6eb167a176
Make build without warnings with debugging disabled
2009-06-19 16:21:28 +01:00
Sebastian Dröge
29aa30d9a0
frei0r: Make plugin scanning more robust
2009-06-19 11:03:16 +02:00
Sebastian Dröge
b30ebf0108
frei0r: Make sure to only register plugins that have valid propert types
2009-06-19 11:03:16 +02:00
Sebastian Dröge
abffe58d43
frei0r: Remove custom get_unit_size implementation
...
This is already handled by the default one from GstVideoFilter
2009-06-19 11:03:15 +02:00
Sebastian Dröge
ab0a9e3694
frei0r: Fix the klass of the filter elements
2009-06-19 11:03:15 +02:00
Sebastian Dröge
3aabf06c86
frei0r: Free type names
2009-06-19 11:03:15 +02:00
Sebastian Dröge
32a0af3e54
frei0r: Unref the GstCollectPads instance on finalize
2009-06-19 11:03:15 +02:00
Sebastian Dröge
15f1ccaef8
frei0r: Don't allow caps changes in PLAYING/PAUSED
...
Most frei0r source plugins generate output based on
previous output and creating a new instance on caps
changes will let the output start at 0 again.
2009-06-19 11:03:14 +02:00
Sebastian Dröge
d459b814f1
freir0: Add support for frei0r mixer plugins
2009-06-19 11:03:14 +02:00
Sebastian Dröge
6fc47a92df
frei0r: Destroy the f0r_instance_t in stop()
2009-06-19 11:03:14 +02:00
Sebastian Dröge
455981d336
frei0r: Add the frei0r plugin type to the element name
...
This makes it easier to distinguish generators from filters, etc
2009-06-19 11:03:14 +02:00
Sebastian Dröge
e3afdb0bd5
frei0r: Add support for frei0r source/generator plugins
2009-06-19 11:03:14 +02:00
Sebastian Dröge
41869062c6
frei0r: Allow the complete double range for double properties
...
The spec restricts it to [0,1] but some plugins are using the
complete double range.
2009-06-19 11:03:13 +02:00
Sebastian Dröge
6ed5ac184b
frei0r: Use better property nicks
2009-06-19 11:03:13 +02:00
Sebastian Dröge
0a684a3d04
frei0r: First version of a frei0r wrapper plugin
...
Currently this only supports frei0r filters.
2009-06-19 11:03:13 +02:00
Maximilian Högner
d45e804d5a
scaletempo: Explicitely cast to signed integers to fix a segfault
...
Fixes bug #585660 .
2009-06-19 11:02:00 +02:00
Sebastian Dröge
e4730e205f
shapewipe: Implement basic QoS
...
This change is based on Tim's QoS implementation
for jpegdec.
2009-06-19 11:02:00 +02:00
Sebastian Dröge
02b9686463
shapewipe: Proxy queries on the video pads to the correct peers
2009-06-19 11:02:00 +02:00
Sebastian Dröge
09094f2f3d
shapewipe: Proxy bufferalloc on the video sinkpad
2009-06-19 11:02:00 +02:00
Sebastian Dröge
80d5bd7168
shapewipe: Try to work inplace if possible
...
This saves one new, large allocation per frame for the
most cases.
2009-06-19 11:01:59 +02:00
Tim-Philipp Müller
3b99292629
mxfdemux: fix stray semicolons that mess up if statement
2009-06-18 21:17:24 +01:00
Stefan Kost
2bb31a8d4a
camerabin: reset filename after capture to avoid racy when capturing again
...
If we don't reset the filename we cannot check if we still expect the filename
for a subsequent capture pass. The imagebin would good to paused and we set the
filename in that state. This trigers an error-message and would capture to the
old filename.
2009-06-16 19:14:25 +01:00
Stefan Kost
80408b1de2
camerabin: set imagebin to PAUSED on capture and delayed filename setting
...
We need to set imagebin to PAUSED to not fail the bufferalloc. We also need to
keep the filesinks state locked until we have the filename for the run.
2009-06-14 10:56:30 +03:00
Stefan Kost
1187b88acd
outputselector: do the pad_alloc for the pad that is pending and have a fallback
...
We should do the pad_alloc for the pending pad if any, as we will switch to that
pad on next _chain() call. Also do a fallback alloc, if there is no output yet to
not fail state transitions in dynamic pipelines.
2009-06-14 10:56:23 +03:00
LRN
7b28f931bb
Added base libs to debug utils makefile
...
Fixes #585015
2009-06-07 23:01:30 +02:00
Edward Hervey
4f0b03d357
hdvparse: Link against libm because we use pow().
2009-06-06 19:28:07 +02:00
Tim-Philipp Müller
e2ef7a2a8a
id3mux: init genre field in ID3v1 tag to an invalid number
...
So that it is not interpreted as 'Blues' if no genre is to be written.
2009-06-06 02:35:35 +01:00
Tim-Philipp Müller
75cc0245fa
id3mux: don't write ID3v1 tag until specifically instructed to do so
...
ID3v1 tags are one of the most broken and ill-designed things that
exist on this planet. Let's not write them by default.
2009-06-06 02:13:13 +01:00
Tim-Philipp Müller
73f231fac9
id3mux: don't write empty ID3v1 tag
2009-06-06 02:13:13 +01:00
Tim-Philipp Müller
09a304b39a
id3tag: rename new id3tag element to id3mux replacing the one removed from -ugly
2009-06-06 02:13:07 +01:00
Jan Schmidt
def9b999d9
nsf: Fix compiler warning on Solaris.
...
A SEC() macro already exists on Solaris, causing warnings about
redefining it.
2009-06-05 23:52:49 +01:00
Edward Hervey
0aa62012c6
hdvparse: Fix the build on Commander Thaytan's S10SP
2009-06-05 22:20:46 +02:00
Stefan Kost
4d9a0e832c
camerabin: fix link order
...
Move local version up in the link order.
2009-06-05 21:29:46 +03:00
Edward Hervey
0e1ee9031a
hdvparse: Emit a GST_MESSAGE_ELEMENT with some goodness in it.
2009-06-05 20:23:44 +02:00
Edward Hervey
37254a21f4
mpegvideoparse: Add methods to get names of various values.
2009-06-05 20:23:44 +02:00
Edward Hervey
22496517e0
mpegtsdemux: Fix HDV private stream definition/caps.
2009-06-05 20:23:44 +02:00
Edward Hervey
c4ef659ebd
hdvparse: Rewrite from scratch. Handle both hdv-a and hdv-v
...
This time we analyze a lot more information.
Still need to re-add the message emission.
2009-06-05 20:23:44 +02:00
Lasse Laukkanen
6a47f6f594
camerabin: preview image sending optimization
...
* decouple image capturing from image post-processing and encoding
* post image-captured message after image is captured
* post preview-image message with snapshot of captured image
2009-06-05 15:51:31 +03:00
Lasse Laukkanen
bbf48697fb
camerabin: don't lose post processing element in first reset
2009-06-05 15:51:31 +03:00
Lasse Laukkanen
683b72a5fe
camerabin: add debug including dot graph writing
2009-06-05 15:51:31 +03:00
Lasse Laukkanen
430f343522
camerabin: unblock if error occurs during capture
2009-06-05 15:51:31 +03:00
Lasse Laukkanen
ca4bfb2e47
camerabin: ignore night mode handling if already in night mode
2009-06-05 15:51:31 +03:00
Lasse Laukkanen
cbcd4e3330
camerabin: stop ongoing capture if changing resolution
2009-06-05 15:51:30 +03:00
Lasse Laukkanen
cad76384b3
camerabin: limit the size of video bin queue leading to view finder
...
We don't want to show old buffers in view finder.
2009-06-05 15:51:30 +03:00
Lasse Laukkanen
3ff7128293
camerabin: don't proxy gst xoverlay interface
...
Default view finder sink in camerabin is autovideosink which doesn't
support xoverlay iface. If application decides to use another sink
that supports xoverlay, then it can use the interface directly.
2009-06-05 15:51:30 +03:00
Lasse Laukkanen
710faaef68
camerabin: allow configuring photography settings when in NULL state
...
Cache the photography settings if set in NULL state and apply them later
2009-06-05 15:51:30 +03:00
Lasse Laukkanen
53e6e4b0d5
camerabin: crop still image capture frame if necessary
...
If incoming still image capture frame aspect ratio differs from aspect
ratio that application requested, then apply crop to the frame.
2009-06-05 15:51:30 +03:00
Lasse Laukkanen
d8013c1b76
output-selector: serialize setting and actual changing of new active pad
2009-06-05 10:00:38 +03:00
Lasse Laukkanen
97ccdf9460
output-selector: unref latest buffer also when resending has been disabled
2009-06-05 10:00:29 +03:00
Lasse Laukkanen
ab169897b3
output-selector: keep ref to buffer for resending only if explicitly requested
2009-06-05 10:00:14 +03:00
Wim Taymans
eff6395328
inputselector: don't leak pads in iterator
2009-06-04 19:09:34 +02:00
Jan Schmidt
8eac0482fd
mpegdemux: Add a GST_MEMDUMP line in the descriptor parsing
...
Make it possible to see descriptor contents in the debug output
(GST_DEBUG=mpegtsdesc:9), and remove a stray semi-colon.
2009-06-04 16:29:31 +01:00
Jan Schmidt
b8eb0d5dbb
mpegtsdemux: Avoid passing the custom GST_FLOW_NEED_MORE_DATA upstream
...
Don't return GST_FLOW_NEED_MORE_DATA from the chain function at the end
of files.
2009-06-04 16:11:16 +01:00
Sebastian Dröge
a0ad632320
inputselector: Notify when the tags property of the selector sinkpads changes
...
First part of bug #584686 .
2009-06-04 08:57:25 +02:00
Christian Schaller
b14110f1be
dvdspu: add missing header to Makefile.am: gstspu-common.h
2009-06-02 11:23:37 +01:00
Tim-Philipp Müller
bb95218b73
aacparse: fix sample rate extraction from codec data
...
In one case we extracted the sample rate index from the codec data
and saved it as sample rate rather than getting the real sample
rate from the table. Fix that, and also make sure we don't access
non-existant table entries by adding a small helper function that
guards against out-of-bounds access in case of invalid input data.
2009-06-02 00:56:53 +01:00
Tim-Philipp Müller
52904d7175
aacparse, amrparse: remove bogus gst_pad_fixate_caps() calls
2009-06-02 00:56:53 +01:00
Tim-Philipp Müller
44cee1789c
baseparse: propagate return value of GstBaseParse::set_sink_caps()
...
gst_base_parse_sink_setcaps() presumably should fail if the subclass
returns FALSE from its ::set_sink_caps() function.
2009-06-02 00:56:53 +01:00
Tim-Philipp Müller
279727d777
baseparse: don't try to GST_LOG an already-freed caps string
...
The proper way to log caps is via GST_PTR_FORMAT anyway.
2009-06-02 00:56:53 +01:00
Tim-Philipp Müller
f5a03ec2a6
aacparse: set channels and rate on output caps, and keep codec_data
...
Create output caps from input caps, so we maintain any fields we
might get on the input caps, such as codec_data or rate and channels.
Set channels and rate on the output caps if we don't have input caps
or they don't contain such fields. We do this partly because we can,
but also because some muxers need this information. Tagreadbin will
also be happy about this.
2009-06-02 00:56:52 +01:00
Mark Nauwelaerts
7f82fe3b46
gppmux: enhance ftyp brand heuristic. Fixes #584360 .
2009-06-01 22:42:44 +02:00
Sebastian Dröge
7709bf5f2a
shapewipe: Fix some issues that were exposed by the new unit test
2009-06-01 21:25:13 +02:00
Sebastian Dröge
6e9d79e08c
shapewipe: Add documentation and integrate into the build system
2009-06-01 21:25:12 +02:00
Tim-Philipp Müller
7c5ff224fc
sdpdemux: include glib.h before checking if G_OS_WIN32 is defined
2009-05-31 20:24:44 +01:00
Edward Hervey
c80da130d5
hdvparse: Setting rank to NONE so it doesn't get picked up by playbin2.
2009-05-31 18:23:50 +02:00
Edward Hervey
5df5059d56
hdvparse: Emit application message with the parsed information.
2009-05-31 18:23:08 +02:00
Edward Hervey
c6cd4d09e2
hdvparse: New element for parsing private/hdv-a1 streams.
2009-05-31 14:15:43 +02:00
Sebastian Dröge
01b8bacd1b
shapewipe: Adjust border to still have everything transparent at 1.0 and the other way around
2009-05-29 21:07:26 +02:00
Sebastian Dröge
332dae7198
shapewipe: Divide the border value by two, otherwise we use a twice a wide border
2009-05-29 16:55:25 +02:00
Sebastian Dröge
19b4c4f335
shapewipe: Add border property to allow smooth borders
...
...and use a border of 0.01 in the example application.
2009-05-29 16:52:21 +02:00
Jan Schmidt
db7d1a7eeb
mpegtsdemux: Fix bogus uninitialised variable access
...
Typo in the previous commit
2009-05-29 15:44:51 +01:00
Jan Schmidt
f3a9f52536
mpegtsdemux: Use the ISO 639 language code descriptor to send tags.
...
If there is an ISO 639 language descriptor for a stream, send a language
code tag so that players can show a meaningful language for the audio and
subtitle streams.
2009-05-29 15:07:11 +01:00
Sebastian Dröge
febef56cf2
shapewipe: Add a simple shapewipe transition filter & example application
2009-05-29 15:34:03 +02:00
Olivier Crête
f6be4da21d
rtpbin: Transform the right session sdes message
...
Fixes #584165
2009-05-29 10:39:09 +02:00
Olivier Crête
71fe0d7bd3
Add ssrc to application/x-rtp-source-sdes structure
2009-05-29 10:39:09 +02:00
Tim-Philipp Müller
53eeb90c21
audioparse: add support for A-Law and µ-Law
2009-05-28 23:14:46 +01:00
Tristan Matthews
530377c40f
gstspu: Fix compiler warnings on OS/X
...
Fix some warnings for format string args and uninitialized vars on OS/X
Fixes : #584164
Signed-off-by: Jan Schmidt <thaytan@noraisin.net>
2009-05-28 23:11:38 +01:00
Mark Nauwelaerts
f7f056c6b2
qtmux: use different stsd atom type for H263 for ISO and QT variants
...
Fixes #584114 .
2009-05-28 13:56:38 +02:00
Mark Nauwelaerts
840955c226
amrparse: consider header size in byte <-> time conversions
2009-05-28 13:09:24 +02:00
Mark Nauwelaerts
c07be49896
baseparse: fix debug category
2009-05-28 13:08:42 +02:00
Stefan Kost
ff6bea9231
selector: remove not needed instance var (previous commit).
2009-05-28 10:38:50 +03:00
Stefan Kost
addb247436
outputselector: implement pad_alloc on active pad.
2009-05-28 10:15:50 +03:00
Wim Taymans
af89b6de1c
rtpsouce: the network address is in network order
...
Bring the network address in netowkr byte order to the host order.
2009-05-27 11:03:14 +02:00
Jan Schmidt
0716d36b13
gstspu: Convert g_warnings to GST_ERROR, and fix format specifiers
...
Use G_GSSIZE_FORMAT for printing pointer differences, which should work on
both 32-bit and 64-bit systems.
Use GST_ERROR instead of g_warning for printing messages about unknown
packet contents.
2009-05-27 00:51:45 +01:00
Jan Schmidt
35a66554b4
gstspu: Fix a nasty regression, with DVDs randomly crashing
...
Use the local wrapper function when clearing the compositing buffers to
ensure the correct portion is being cleared.
2009-05-27 00:47:05 +01:00
Jan Schmidt
b460592917
mpegdemux: Only treat streams from 0xa0 to 0xaf as LPCM, not 0xa0..0xbf
...
Don't treat some streams (Private Stream 2) as LPCM when they're not. Fixes
playback of files that have private streams in them now that the PES filter
emits such packets.
2009-05-26 21:05:01 +01:00
Tim-Philipp Müller
606daecf70
dvdspu: fix printf formats to avoid compiler warnings
2009-05-26 18:43:18 +01:00
Jan Schmidt
b68a05dbfa
gstspu: Implement PGS rendering and alpha blending
...
Refactor the DVD subpicture compositing, switching it to 8-bit alpha
calculations. Reuse some of the resulting code to implement PGS
subpicture blending.
Implement parsing and collecting of composition objects properly, but
assuming a single active window and colour palette for now. I need more
PGS samples.
2009-05-26 15:58:09 +01:00
Jan Schmidt
7e20e3be45
dvdspu: Move a bunch of vobsub specific logic to a separate file.
...
Start separating out the vobsub logic in preparation for creating
separate renderer objects for each subpicture format.
2009-05-26 15:31:56 +01:00
Jan Schmidt
e0e5975462
dvdspu: Add copyright header and includes to the PGS handler
2009-05-26 15:31:55 +01:00
Jan Schmidt
293a976532
dvdspu: Make the PGS dumping less verbose
2009-05-26 15:31:55 +01:00
Jan Schmidt
871287ba2a
dvdspu: Collect entire PGS packets and queue as events
...
Collect fragmented PGS packets and submit as complete events for
processing at the correct moment.
2009-05-26 15:31:55 +01:00
Jan Schmidt
4e847cb4ac
dvdspu: Add simple PGS handler that dumps the packet info
...
Add setcaps logic on the subpicture sink pad for configuring
which subpicture format is arriving.
Add the first piece of PGS subpicture handling by dumping the stream
contents out to the terminal as the packets arrive.
Add some more debug.
Don't calculate the running time for our subpicture packets twice,
once is enough.
2009-05-26 15:31:54 +01:00
Jan Schmidt
78cd406a76
dvdspu: Add a simple default colour table.
...
When we're not provided with a palette in advance, draw with a grey
colour or two, instead of YUV green.
2009-05-26 15:31:54 +01:00
Jan Schmidt
f7eefea47c
mpegdemux: Add sparse stream filling.
...
First stab at sending new-segment events to effect sparse stream
updates.
2009-05-26 15:31:54 +01:00
Jan Schmidt
e1d778e559
mpegdemux: Add support for outputting sub-picture streams found in files.
...
Output subpicture streams when they are found on the private stream ID.
Don't strip off the first byte of such packets when pushing.
2009-05-26 15:31:53 +01:00
Jan Schmidt
471640e3f3
mpegtsdemux: Add mapping for DVD and Bluray subpicture streams.
...
Add output subpicture pads for DVD (video/x-dvd-subpicture) and Bluray PGS
(subpicture/x-pgs) streams. Remove an unused variable from
the PES filter.
2009-05-26 15:31:53 +01:00
Jan Schmidt
a7cd4b03ad
dvdspu: Don't accidentally lose the colour palette when flushing the SPU
...
Fixes racy startup on DVDs where it sometimes gets entirely the wrong set
of colours in the menus and subtitles.
2009-05-26 15:31:51 +01:00
Wim Taymans
707eaf7684
rtpsource: byteswap the port from GstNetAddress
...
Since the port in GstNetAddress is in network order we might need to byteswap it
before adding it to the source statistics.
2009-05-26 15:42:55 +02:00
Edward Hervey
023af351fb
gstpesfilter: Directly use gst_adapter_take_buffer().
2009-05-25 18:32:26 +02:00
Edward Hervey
410d8f8910
gstpesfilter: Don't peek the adapter if we don't have enough data.
2009-05-25 18:32:26 +02:00
Edward Hervey
849ea99358
gstpesfilter: Don't skip private streams PES but push them out.
...
The one thing we *DO* need to do for those streams is to skip all
the PTS/DTS/Scrambling/DSM/extension/... handling.
2009-05-25 18:32:26 +02:00
Edward Hervey
36cc757bda
mpegtsdemux: Ignore NULL packets as early as possible.
...
This avoids:
* creating a MpegTSStream structure for nothing
* processing packet data for nothing
2009-05-25 18:32:26 +02:00
Edward Hervey
f92f282874
mpegtsdemux: Add mapping for HDV private streams
2009-05-25 18:32:26 +02:00
Wim Taymans
269f3ff1a2
rtpbin: remove ptdemux ghostpads
2009-05-25 13:46:29 +02:00
Michael Smith
1a98c66f4a
adpcmdec: Add new plugin for ms-adpcm decoding.
2009-05-22 16:56:52 -07:00
Edward Hervey
0444aa3374
mpegvideoparse: Detect interlaced content and set it on outgoing caps.
...
I also added the parsing of all the other bits in the sequence extension
header in case we need it later.
2009-05-22 17:19:26 +02:00
Wim Taymans
e8423da78e
rtpbin: add to new signal to remove SSRC pads
2009-05-22 16:41:19 +02:00
Ali Sabil
0d014baaa4
ssrcdemux: emit signal when pads are removed
...
Add action signal to clear an SSRC in the ssrc demuxer.
Add signal to notify of removed ssrc.
See #554839
2009-05-22 16:35:20 +02:00
Wim Taymans
9353ceb530
rtpbin: use our ghostpads instead of its target
...
Since we keep a reference to our ghostpads, we can use them to track sessions.
This avoid us having to mess with the target of the ghostpad.
2009-05-22 15:45:19 +02:00
Wim Taymans
1c85da2d2b
rtpbin: don't warn when getting request pads twice
...
Allow getting the request pads multiple times, just return the previously
created pads.
2009-05-22 15:36:17 +02:00
Wim Taymans
a0b6202baf
rtpsource: add RTP and RTCP source address
...
Add the RTP and RTCP sender addresses in the stats structure.
2009-05-22 13:47:30 +02:00
Wim Taymans
d48dcb0499
rtpsession: reuse source code for SDES
...
Reuse the RTPSource object property instead of duplicating code.
2009-05-22 13:45:15 +02:00
Wim Taymans
142840432b
rtpbin: set target state on new elements
...
Set the state on newly added elements to the state of the parent.
Add some debug info and do some cleanups
2009-05-22 12:20:13 +02:00
Wim Taymans
58c59d7953
rtpbin: unref requests pads after releasing
2009-05-22 11:59:17 +02:00
Wim Taymans
580b20d6cc
mpegtsdemux: fix memleaks and refcounts
...
Use correct constants for PID_type so that we clear the right filter.
provide_clock must return a ref to a clock.
2009-05-22 11:02:07 +02:00
Tim-Philipp Müller
e5b1c976c4
id3tag: canonicalise function names
2009-05-22 09:54:57 +01:00
Tim-Philipp Müller
fdaeae57c9
id3tag: change GType to GstId3Tag so it doesn't conflict with the id3tag plugin in -ugly
2009-05-22 09:51:29 +01:00
Tim-Philipp Müller
02bff8754b
id3tag: register GType of the base class with a less generic name
...
.. so we can easily move the base class into -base later without
causing GType name conflicts.
2009-05-22 01:30:48 +01:00
Olivier Crête
c5ab83a1cb
rtpbin: Implement releasing the streams
...
See #561752
2009-05-22 01:46:04 +02:00
Olivier Crête
451ca5dbc0
rtpbin: Keep jb signals handler
...
Keep the signal handlers so they can be disconnected at release time
See #561752
2009-05-22 01:16:11 +02:00
Wim Taymans
b3aeee2bf2
rtpbin: use the right lock for the sessions
...
Use the right lock when iterating the sessions.
2009-05-22 01:12:57 +02:00
Olivier Crête
fb59348dbe
rtpbin: Free session if request pads are released
...
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.
See #561752
2009-05-22 01:03:55 +02:00
Olivier Crête
4424fd3c93
rtpbin: Implement relasing of the rtp recv pad
2009-05-22 00:51:53 +02:00
Olivier Crête
65d55e6b13
rtpbin: Implement releasing of rtp send pads
2009-05-22 00:44:51 +02:00
Olivier Crête
b831c9b434
rtpbin: Implement release of the recv rtcp pad
...
See #561752
2009-05-22 00:34:36 +02:00
Olivier Crête
ab80a4fa41
rtpbin: Implement releasing of rtcp src pad
...
See #561752
2009-05-22 00:16:19 +02:00
Wim Taymans
e9eae335f1
sdpdemux: rework RTCP sending and RTP receiving
...
When we are dealing with multiast, create the udp src and sink elements pointing
to the multicast addresses. When we are doing unicast, receive data on the local
ports and don't send RTCP because we don't know where we have to send it.
Fixes #583188
2009-05-21 22:22:06 +02:00
Michael Smith
fe38f53572
id3tag: Add new id3 tagging plugin, supports v1, v2.3, and v2.4.
...
By default, does v1 and v2.3, but there are properties to select.
Will hopefully replace id3mux, id3v2mux, in the not-too-distant future.
2009-05-21 13:15:46 -07:00
Edward Hervey
0520a2a53b
mxf: Fix frame_layout for non-interlaced formats. Fixes #583337
2009-05-20 17:15:51 +02:00
Jan Schmidt
90aa8eff4c
fpsdisplaysink: Fix resetting of the sink in NULL
...
Reset the fpsdisplaysink in NULL by removing the textoverlay if we
created it.
Fixes : #582633
2009-05-16 01:26:55 +01:00
Jan Schmidt
48e32a0890
Moved 'y4menc' from -bad to -good
2009-05-16 00:17:00 +01:00
Thiago Santos
405f80dec4
[qtmux] Fixes segfault when adding a blob as first tag.
...
Moves tags data initialization to the function that actually appends
the tags to the list. Fixes #582702
Also fixes some style caught by the pre-commit hook.
2009-05-15 09:21:44 -03:00
Sebastian Dröge
f5ba4904f7
mxfdemux: Use a RW lock to protect metadata and add all pads at once without a lock held
...
This makes it possible, among other things, to do a query in the
pad-added callback.
Fixes bug #582656 .
2009-05-15 11:49:20 +02:00
Jan Schmidt
29b44a5e2f
dvdspu: Push update frame, if any, when entering stills.
...
When entering a still frame generates an updated buffer, make sure
to push it out, otherwise we may not put a frame onscreen with a
rendered button, causing raciness as to whether buttons get drawn
or not when jumping back to the menu on some discs.
2009-05-14 11:28:14 +01:00
Wim Taymans
b20a88702d
y4menc: change my email
...
change my email to something more current
See #580783
2009-05-13 17:55:46 +02:00
Wim Taymans
60f46ec99c
y4menc: don't strip timestamps
...
Fixes #582483
2009-05-13 17:54:47 +02:00
Sebastian Dröge
453794d383
Moved 'deinterlace2' from -bad to -good
...
And remove old deinterlace plugin as deinterlace2 will
be called deinterlace in -good.
2009-05-13 10:47:54 +02:00
Sebastian Dröge
8c13566624
Moved 'flv' from -bad to -good
2009-05-12 21:50:12 +02:00
Jan Schmidt
ad1f7e6ed3
dvdspu: Make the debugging output a bit clearer.
...
Display more info about custom DVD events in the debug messages.
2009-05-11 17:04:09 +01:00
Jan Schmidt
513367a88c
dvdspu: Always push a frame at the start of a still frame, and fix a leak.
...
Make sure to push the frame for a still frame, with discont = true and
timestamp=none, so that it gets displayed by the sink. Also, don't leak
each rendered video frame during still menus.
2009-05-11 17:04:09 +01:00
Jan Schmidt
571a7746fc
dvdspu: Add a guard when we don't have any subpicture buffer to render
2009-05-11 17:04:08 +01:00
Edward Hervey
f9dfc44a67
mpegtsdemux: Protect bitrate estimation against bogus values.
...
If the estimated bitrate is lower than 188 bytes, there's most likely
something completely wrong with the two samples. If that happens,
force recalculation.
Use guint64 for observation PCR, I saw cases where it would overflow.
2009-05-11 16:59:20 +02:00
Edward Hervey
bc062b9acf
mpegtsdemux: Only take PCR from the active stream for bitrate estimation.
2009-05-11 16:58:58 +02:00
Edward Hervey
432dd98321
mpegtsdemux: Change debugging levels for very frequent messages.
...
This allows debugging with mpegtsdemux:4 while being able to track what's
going on (and avoid taking up as much cpu for debugging as for the actual
demuxing process).
2009-05-11 16:53:18 +02:00
Edward Hervey
5aa3358f3b
mpegtsdemux: Revert indentation and comment header file.
...
One shouldn't run gst-indent on .h files, in this case it was un-beautifying
the indentation :)
2009-05-11 16:53:12 +02:00
Mark Nauwelaerts
29d53b22f9
gppmux: Add MPEG-4 part 2 to supported formats. Fixes #581593 .
2009-05-10 21:21:36 +02:00
Tristan Matthews
6451febd14
mxfmux: Fix uninitialized variable compiler warning
...
This will always be set to something but gcc didn't detect
this. Fixes bug #582013 .
2009-05-10 10:41:41 +02:00
Sebastian Dröge
d09515b49f
mxfmux: Write metadata items in reference order
...
This ensures that the metadata items are always written
in the same order and that first comes the preface,
then the identification linked from the preface, ...
Some demuxers can't handle files where the metadata
items are in random order.
2009-05-09 15:50:51 +02:00
Sebastian Dröge
18f8c9b0b4
mxfmux: Fix EOS logic again
2009-05-09 15:50:51 +02:00
Sebastian Dröge
8692ae2a9d
mxfmux: Don't unref NULL buffers if pushing a buffer after the first failed
2009-05-09 15:50:51 +02:00
Zaheer Merali
ff7b54e7da
mpegtsdemux: Add initial naive seeking support and fix duration query.
...
Sync from gst-fluendo-mpegdemux and have seeking/duration query
improvements in. No support however for wrapped around pcrs etc. but a
start nonetheless.
Also fix indentation issues.
2009-05-08 18:26:43 +01:00
Sebastian Dröge
8c57211bd2
deinterlace2: Add a disabled mode for passthrough operation
...
Also allow to change the mode in PAUSED and PLAYING by updating
the caps if necessary.
2009-05-08 15:42:43 +02:00
Christian Schaller
67dd3c11f4
Add ranks to various muxers and encoders in -bad
2009-05-07 17:53:42 +01:00
Arnout Vandecappelle
9542d9e251
mpeg4videoparse: don't leak the config data
...
Clear the config data when going to READY or when disposed.
Fixes #581427
2009-05-05 16:54:39 +02:00
Wim Taymans
46139253bc
rtpssrcdemux: drop unexpected RTCP packets
...
We usually only get SR packets in our chain function but if an invalid packet
contains the SR packet after the RR packet, we must not fail but simply ignore
the malformed packet.
Fixes #581375
2009-05-05 16:50:14 +02:00
Zaheer Abbas Merali
179f5bb850
mpegtsparse: Remember pids that are meant to be stream pids.
...
Fixes #569781
2009-05-04 22:09:05 +01:00
Vincent Genieux
e41401e317
mpegtsparse: Ignore subtable extension when parsing PAT
...
Fixes #569673 .
2009-05-03 17:42:44 +01:00
Vincent Genieux
8ef8daf4db
mpegtsparse: make safe changing the program-numbers property dynamically
...
Fixes #569437 .
2009-05-03 17:21:22 +01:00
Mark Nauwelaerts
9bbacae78f
baseparse: fix (regression in) newsegment handling
...
(aacparse, amrparse, flacparse). Fixes #580133 .
2009-05-03 14:46:58 +02:00
Tim-Philipp Müller
76535b0e1f
docs: make fpsdisplaysink show up in the docs
2009-05-01 14:28:43 +01:00
Tim-Philipp Müller
9b1c7c94b4
fpsdisplaysink: move private struct into plugin struct and use Gst namespace
2009-05-01 14:28:43 +01:00
Tim-Philipp Müller
e101037589
fpsdisplaysink: rename plugin (not element) to debugutilsbad
...
Makes it easier to add further utils here without creating yet another plugin.
2009-05-01 14:28:42 +01:00
Thiago Santos
76aa98549a
qtmux: changes caps of src pads to video/quicktime, variant=something
...
Take a look at bug #580005 for further info.
2009-04-30 14:43:36 -03:00
Tristan Matthews
8d4315ee5c
fpsdisplaysink: init variable to NULL to avoid compiler warning
...
Fixes #580901 .
2009-04-30 17:09:28 +01:00
Wim Taymans
5704bc8f89
dvdspu: do some basic clipping
...
Add some basic clipping of the subtitle region when the subtitle is bigger than
the image we should put it on.
2009-04-30 14:20:16 +02:00
Wim Taymans
f38cb76b5f
dvdspu: don't EOS when the subtitle got EOS
...
Don't forward the EOS on the subtitle pad as the video might still be running.
2009-04-30 14:18:58 +02:00
Stefan Kost
1ae52725d9
fpsdisplay: code cleanup and plug overlay as needed
...
Pluggin the text-ovelay causes some slowdowns and might need a colorspace
converter. We now only check the text-overlay property whne goint to ready and
plug or unplug the text-overlay at that time. If the property changes during
playing, its not switched immediately.
2009-04-30 13:48:07 +03:00
Tristan Matthews
62db462298
flvmux: init variable to NULL to fix compiler warning
...
Fixes #580786 .
2009-04-29 18:53:58 +01:00
Sebastian Dröge
87e9e529e7
flv: Set/require the framed/parsed fields of the audio/mpeg caps to TRUE
2009-04-29 13:56:07 +02:00
Sebastian Dröge
c741c2cd59
flv: Always write at least the minimal tags and write the PAR as tags
2009-04-29 13:16:25 +02:00
Sebastian Dröge
d780d5f095
flv: Add support for muxing some tags
2009-04-29 13:03:46 +02:00
Sebastian Dröge
51e01d6bb5
flv: Add support for title tag
2009-04-29 13:03:27 +02:00
Sebastian Dröge
bf4d7d233d
flv: Fix parsing of tags and add new mappings
...
We shouldn't register a new GstTag for every unknown tag
we find as this might lead to conflicts and also those
tags are essentially unknown.
Add mappings for some known tags and also convert string
dates to GDate, as found in many FLV files.
2009-04-29 09:42:32 +02:00
Olivier Crête
3a4c9c990a
rtpmux: Reject wrong caps
2009-04-28 16:28:40 -04:00
Olivier Crête
6c4eeff781
rtpmux: Fix leak
...
Fixed a leak discovered by Laurent Glayal <spegle@yahoo.fr>
2009-04-28 16:03:49 -04:00
Olivier Crête
905aad3572
rtpmux: Fix leak
...
Fixed a leak discovered by Laurent Glayal <spegle@yahoo.fr>
2009-04-28 15:59:37 -04:00
Olivier Crete
cc51f90c1a
rtpsouce: make WARNING into LOG
...
Since neither rtpmanager nor any of the payloaders properly implement
pad allocation, there is no way for the rtpmanager to inform downstream elements
of the new SSRC if there is an SSRC collision. So the warning is emitted all the
time and it is confusing.
Fixes #580144
2009-04-27 11:11:11 +02:00
Olivier Crete
bf3ea86c2f
rtpsession: notify when SSRC changes
...
Emit a g_object_notify when the SSRc changes because of a collision.
Fixes #580144
2009-04-27 11:11:11 +02:00
Christian Schaller
b627bb5f2d
Add new plugin to spec file and add missing header to gst/dccp/Makefile.am
2009-04-27 10:04:51 +01:00
Thiago Santos
bb86b8ca7e
mp4mux: Changes src caps to application/x-iso-mp4
...
Fixes #580005
2009-04-24 18:53:36 -03:00
Stefan Kost
95520973d0
fpsdisplay: more cleanups
...
Use normal gst-defines in PLUGIN_DEFINE. Shorten _start/stop method names.
More ideas. Move debug category-init down to plugin-init.
2009-04-23 14:38:20 +03:00
Stefan Kost
314f2e26c5
fpsdisplay: use a nicer font family
2009-04-23 14:38:19 +03:00
Stefan Kost
193f638b0a
fpsdisplay: various cleanups, docs and comments
...
Remove unused base_init. Add basic doc blob. Reuse query object. Rename
variables for clarity. Add comments and ToDos.
2009-04-23 14:38:19 +03:00
Stefan Kost
790235e29f
fpsdisplay: remove iface proxy
...
When we get bus messages for setting the xid, we have the real sink element
instance as message_src. No need to proxy the xoverlay iface therefore
(autovideosink does not do it either). Also we don't need to rewrite the
message src of all messages from that sink.
2009-04-23 14:38:19 +03:00
Jan Schmidt
5307933825
input-selector: Forward segment events for the active pad immediately.
...
When a segment event is received on the active pad, forward it downstream
immediately instead of deferring it until the next data buffer arrives. This
fixes problems with segment updates never being sent downstream, like those
needed for sparse streams, or for closing previously opened segments.
This fixes playback of DVD menus with a still video frame and an audio track,
for example.
Fixes : #577843
2009-04-23 11:09:13 +01:00
Olivier Crête
962f9173f2
rtpmux: Fix warning
2009-04-22 18:01:07 -04:00
Olivier Crête
74e0724acf
rtpmux: Set different caps depending on the input
2009-04-22 16:29:44 -04:00
Olivier Crête
098b75c2f2
rtpmux: Only free pad private when pad is disposed
2009-04-22 16:26:08 -04:00
Sebastian Dröge
6734a9980e
flv: Add documentation to flvmux and flvdemux
...
Partially fixes bug #573737 .
2009-04-22 19:52:05 +02:00
Sebastian Dröge
8e84633120
mxf: Mark most fields of the instance struct as private
2009-04-22 19:45:07 +02:00
Sebastian Dröge
4efa891f6f
deinterlace2: Add documentation and integrate into the build system
2009-04-22 19:43:22 +02:00
Sebastian Dröge
e3664d57ad
mxf: Add documentation to mxfmux and update the docs
2009-04-22 19:24:43 +02:00
David Schleef
ef5e486fcd
Add interlaced support to videoparse
...
Add a virtual method in rawparse to set buffer flags. This doesn't
use API from unreleased -base, since it defines GST_VIDEO_BUFFER_TFF
if it's not defined yet.
2009-04-21 18:55:05 -07:00
Olivier Crête
b68fa5111a
Merge branch 'rtpmux-fixes'
2009-04-21 13:27:29 -04:00
Edward Hervey
c717af5c0a
mpegdemux: Only error out at EOS push failure if we don't have any streams.
...
This should remove the bogus error messages while still keeping the original
intent of this, which is to inform the pipeline/application/user that we
could not find any valid streams.
There are many reasons why pushing an event can fail, and not all of them are
because there's no link downstream (it could be because it was blocked, or
flushing).
2009-04-21 16:12:08 +02:00
Zaheer Abbas Merali
51fdc78786
mpegtsdemux: add hack specific for itvhd
...
itvhd masks its h264 video stream as a private stream making it harder for
other set top boxes to decode. this checks for specific program number, video
pid and stream type combination before declaring it as h264.
2009-04-21 12:09:31 +01:00
Zaheer Abbas Merali
c5825f9e1d
mpegtsparse: detect AC3 streams in PMT table
...
add 'has-ac3' boolean to pmt bus message
2009-04-21 12:09:31 +01:00
Zaheer Abbas Merali
39d6074539
itv hd hack
2009-04-21 12:09:31 +01:00
Zaheer Abbas Merali
e8ca380063
hack for itvhd sid to detect mpeg1 as h264
2009-04-21 12:09:31 +01:00
Olivier Crête
9c014d0013
rtpmux: Remove useless caps mangling
2009-04-20 20:24:17 -04:00
Olivier Crête
edd3717150
rtpmux: Rename variable for more clarity
2009-04-20 20:23:39 -04:00
Olivier Crête
655a3d125a
rtpmux: Use GST_BOILERPLATE
2009-04-20 20:23:37 -04:00
Olivier Crête
5af0efd1d3
rtpmux: Do the includes locally
2009-04-20 20:23:02 -04:00
Sebastian Dröge
0ad5dec019
deinterlace2: Make it possible to select interlacing autodetection or to enfore deinterlacing
...
For this add a "mode" property that defaults to "interlaced" for now as
most decoders/demuxers don't properly set the "interlaced" field on the
caps yet.
If this property is set to "auto" the element will work in passthrough
mode unless the caps contain the "interlaced" field.
2009-04-19 17:21:16 +02:00
Zaheer Merali
71be79f668
mpegtsparse: fix leak of GST_TYPE_LIST gvalue
2009-04-18 23:42:57 +01:00
Zaheer Merali
c9ae67fac9
mpegtsparse: fix leak in src_pad_query
2009-04-18 13:09:23 +01:00
Wim Taymans
71076cad54
rtpsession: join the RTCP thread
...
Avoid a case where a joinable thread would be left unjoined, which leaked the
thread structure.
Fixes #577318 .
2009-04-17 16:16:29 +02:00
Sebastian Dröge
63044be8e5
deinterlace2: Use GST_(DEBUG|WARNING|ERROR)_OBJECT instead of the non-OBJECT ones
2009-04-17 15:39:59 +02:00
Sebastian Dröge
9017f1903a
deinterlace2: Reset history if DISCONT is set on the incoming buffer
2009-04-17 15:39:36 +02:00
Sebastian Dröge
6c8f4a36e3
deinterlace2: Fix timestamps for buffers with RFF flag set
2009-04-17 15:39:10 +02:00
Sebastian Dröge
7a30947913
mxf: Properly handle the new interlaced support from libgstvideo for (de)muxing
2009-04-16 22:14:15 +02:00
Sebastian Dröge
a32e180155
deinterlace2: Rename line_length to row_stride and remove output_stride
2009-04-16 17:42:27 +02:00
Sebastian Dröge
ffaef58b59
deinterlace2: Implement support for RFF and ONEFIELD buffer flags
2009-04-16 17:42:27 +02:00
Stefan Kost
e01373662a
fpsdisplaysink: add a initial port of a sink with fps display
...
This now works with a event probe. Needs some extra work.
2009-04-16 18:39:29 +03:00
Lasse Laukkanen
78b208125a
camerabin: clean up and fix assertion fail when setting zoom in NULL state
2009-04-16 16:08:42 +03:00
Lasse Laukkanen
9b0fa11a5d
camerabin: fix format matching when detecting allowed frame rate
2009-04-16 16:08:41 +03:00
Lasse Laukkanen
0847a84f41
camerabin: don't lose pending state when changing resolution
2009-04-16 16:08:40 +03:00
Lasse Laukkanen
65ddcd6d5d
camerabin: change img-done signal parameter from GString* to const gchar*
...
Don't allow setting filename via img-done signal parameter but force app
use filename property. Don't stop capture when setting filename property.
Update check unit test based on the change.
2009-04-16 15:19:20 +03:00
Olivier Crête
d8ba5624ce
rtpmux: Add GST_DEBUG_FUNCPTRs
2009-04-15 13:23:01 -04:00
Olivier Crête
66fca81e23
rtpdtmfmux: Release locked pad on release_pad
...
Release the special pad if the pad is removed from the muxer.
2009-04-15 13:15:55 -04:00
Laurent Glayal
65cb85316b
rtpdtmfmux: Release special on pad dispose
...
Fixes #577690
2009-04-15 13:11:32 -04:00
Wim Taymans
a2fdf5648f
jitterbuffer: prevent overflow in EOS estimation
...
Use a guint64 instead of a guint to hold a 64bit value to prevent completely
bogues EOS estimation values due to overflows.
2009-04-15 18:14:48 +02:00
Wim Taymans
ba6b41dad4
rtpbin: we should not provide a clock
...
There is no need to provide a clock.
2009-04-15 17:44:17 +02:00
Wim Taymans
f7af854c28
jitterbuffer: more estimated EOS fixes
...
Do more accurate EOS estimate and guard against backward timestamps.
2009-04-15 17:28:56 +02:00
Wim Taymans
87da61f965
jitterbuffer: release lock before pushing EOS
...
Make sure we release the jitterbuffer lock before we start pushing out data
because else we might deadlock.
2009-04-15 17:25:02 +02:00
Sebastian Dröge
e539615c79
deinterlace2: Move output buffer from the instance struct to a function parameter
2009-04-15 15:46:44 +02:00
Sebastian Dröge
b66a6f90be
deinterlace2: Add initial support for automatic detection of the field order
2009-04-15 15:33:17 +02:00
Sebastian Dröge
5a95bac390
deinterlace2: Add support for YVYU colorspace
...
This is the same as YUY2 with just Cr and Cb swapped. As
we don't make a difference between them when deinterlacing
this works.
2009-04-15 14:47:49 +02:00
Sebastian Dröge
50424e44ad
mxfmux: Small cleanup
2009-04-13 13:33:00 +02:00
Sebastian Dröge
0fa50e9d77
mxfdemux: Don't use invalid buffer offsets, instead assume offset == 0
2009-04-07 15:49:00 +02:00
Sebastian Dröge
acc912599d
mxf: Fix comparison
2009-04-07 15:45:50 +02:00
Sebastian Dröge
83324d6788
Use UL database for all metadata ULs
2009-04-07 15:20:10 +02:00
René Stadler
d5216a1a66
baseparse: Fix slightly broken buffer-in-segment check (aacparse, amrparse, flacparse)
2009-04-07 05:41:46 +03:00
René Stadler
0293f54d06
baseparse: Fix push mode seeking (aacparse, amrparse)
...
Sending the flush-start event forward before taking the stream lock actually
works, in contrast to deadlocking in downstream preroll_wait (hunk 1).
After that we get the chain function being stuck in a busy loop. This is fixed
by updating the minimum frame size inside the synchronization loop because the
subclass asks for more data in this way (hunk 2).
Finally, this leads to a very probable crash because the subclass can find a
valid frame with a size greater than the currently available data in the
adapter. This makes the subsequent gst_adapter_take_buffer call return NULL,
which is not expected (hunk 3).
2009-04-05 05:26:09 +03:00
Jan Schmidt
0b73fd2870
dvdspu: Add some debug
...
Add a little bit of extra debug. Wrap a hardcoded #if 0 into a define instead.
2009-04-02 14:46:22 +01:00
Tim-Philipp Müller
fffc3ba770
legacyresample: fix negotiation so that upstream can actually fixate to downstream's rate
...
If one side has a preference for a particular sample rate or set of sample rates, we
should honour this in the caps we advertise and transform to and from, so that elements
actually know about the other side's sample rate preference and can negotiate to it
if supported. Also add unit test for this.
2009-04-01 15:45:22 +01:00
Mark Nauwelaerts
ad2c7bffe7
baseparse: Delay newsegment as long as possible.
...
If newsegment is sent (too) early, caps may not yet be fixed/set,
and downstream may not have been linked.
2009-03-31 16:18:00 +02:00
Wim Taymans
d6550696d4
rtpbin: add on_npt_stop signal
...
Add the on_npt_stop signal to rtpbin and rtpjitterbuffer to notify the
application that the NPT stop position has been reached.
2009-03-27 17:44:57 +01:00
Wim Taymans
9605150830
outputselector: reset state when going to READY
...
Reset the last-buffer, the pending pad and the segment when going to the READY
state.
Fixes #576712 .
2009-03-27 11:21:21 +01:00
Mark Nauwelaerts
654ca28f1b
qtmux: fix reusing element
...
State change to READY and then back to PAUSED should still provide
the proper structures as are otherwise freshly available following
a request_new_pad.
Pointed out by Thiago Santos.
2009-03-26 21:56:28 +01:00
Sebastian Dröge
f510be57cd
mxf: Fix compilation and compiler errors with GLib < 2.16.0
2009-03-26 20:28:30 +01:00
Sebastian Dröge
2c51bbdfad
mxf: Fix "cast to pointer type of different size" compiler warning
2009-03-26 14:26:34 +01:00
Sebastian Dröge
9b6d6fd0dd
mxf: Rename forgotten function to fix unresolved symbols error
2009-03-26 13:24:49 +01:00
Sebastian Dröge
f22494b6fe
mxf: Use mxf_u{l,uid}_is_equal() and friends instead of memcmp()
2009-03-26 13:20:18 +01:00
Sebastian Dröge
c1c8b40d42
mxf: Differentiate between UL and UUID
2009-03-26 13:11:07 +01:00
Sebastian Dröge
ce01236e32
mxf: Source files and #include cleanup
2009-03-26 12:46:22 +01:00
Sebastian Dröge
eaea85ed4a
xdgmime: Use GIOs g_content_type_guess() if possible
2009-03-26 12:10:05 +01:00
Sebastian Dröge
81af2259c2
mxf: Use the UL database for some more ULs
2009-03-26 11:51:43 +01:00
Sebastian Dröge
a9f931c467
mxf: Remove some GLib < 2.14 compatibility stuff
2009-03-26 11:42:45 +01:00
Руслан Ижбулатов
f5b298e3d7
xdgmime: Link with winsock library to fix build with MinGW
...
Partially fixes bug #573595 .
2009-03-26 11:33:50 +01:00
Руслан Ижбулатов
dafa530773
dccp: Port DCCP plugin to MinGW
...
Partially fixes bug #573595 .
2009-03-26 11:32:08 +01:00
Sebastian Dröge
6f62242c5f
Merge branch 'mxfmux'
2009-03-26 08:13:10 +01:00
Sebastian Dröge
e5caf2edda
mxfmux: Cleanup
2009-03-26 08:12:02 +01:00
Sebastian Dröge
3b88dce4d1
mxfmux: Fix handling of buffers with more than one edit unit and EOS handling
2009-03-26 08:11:20 +01:00
Wim Taymans
6b2c55e254
selector: merge the tags
...
Merge the tags received on the input-selector sinkpads instead of only keeping
the last one we saw.
2009-03-24 15:23:03 +01:00
René Stadler
83016fa9dc
aacparse: Fix busyloop when seeking. Fixes #575388
...
The problem is that after a discont, set_min_frame_size(1024) is called when
detect_stream returns FALSE. However, detect_stream calls check_adts_frame
which sets the frame size on its own to something larger than 1024. This is the
same situation as in the beginning, so the base class ends up calling
check_valid_frame in an endless loop.
2009-03-23 20:57:15 +02:00
René Stadler
3f90e6ff13
aacparse: Refactor check_valid_frame to expose broken code
...
Just moving code around and removing an unhelpful/misleading comment.
2009-03-23 20:57:15 +02:00
Wim Taymans
fcfc22f6f6
qtmux: fix includes for lseek
...
--
2009-03-23 17:07:16 +01:00
LRN
df124a0b28
win32: fix seeking in large files
...
Use _lseeki64() on Windows to seek in large files.
Fixes #576021 .
2009-03-23 17:07:16 +01:00
Sebastian Dröge
da27eb2380
mxf: Move some static const variables into functions
2009-03-23 15:06:11 +01:00
Stefan Kost
a7a97b9139
Makefile.am: no static libs for plugins
2009-03-22 21:02:45 +02:00
Sebastian Dröge
2224a990a8
mxfmux: Fix error handling
2009-03-22 15:58:50 +01:00
Sebastian Dröge
effb5786da
mxfmux: Fix some memory leaks, improve debugging and handle errors better
2009-03-22 15:51:37 +01:00
Sebastian Dröge
ddced37a8b
mxfmux: Add an error state from which we return immediately
...
Also improve debugging a bit.
2009-03-22 15:35:42 +01:00
Sebastian Dröge
226f23edde
mxf: Optimize mxf_ul_is_subclass() a bit
2009-03-21 10:19:49 +01:00
Sebastian Dröge
b409f71f49
mxf: Start implementing a central UL database and add some helper functions and use them
2009-03-21 10:19:49 +01:00
Sebastian Dröge
a19f0375ec
mxfmux: Make sure to include a picture in the edit units when muxing MPEG2/MPEG4
2009-03-21 10:19:49 +01:00
Sebastian Dröge
992caf48ba
mxfdemux: Remove accidentially committed g_assert_not_reached()
2009-03-21 10:19:49 +01:00
Sebastian Dröge
c6730cd223
mxf: Add support for muxing/demuxing subsampled YUV formats
2009-03-21 10:19:49 +01:00
Sebastian Dröge
c95ba980b2
mxfdemux: Use correct width/height for stride conversions
2009-03-21 10:19:49 +01:00
Sebastian Dröge
a31498d8d4
mxf: Implement stride transformations for raw video content for muxing and demuxing
2009-03-21 10:19:49 +01:00
Sebastian Dröge
b6bac882f9
mxfdemux: Simplify caps selection by using a lookup table
2009-03-21 10:19:49 +01:00
Sebastian Dröge
9aa16c2ea5
mxfmux: Add initial support for muxing raw picture essence
2009-03-21 10:19:48 +01:00
Sebastian Dröge
3d2f7c9ca0
mxfmux: Only add an essence container UL once to the partition and preface
2009-03-21 10:19:48 +01:00
Sebastian Dröge
1925b8e9f7
mxfdemux: Add support for AYUV and v308 YUV colorspaces
2009-03-21 10:19:48 +01:00
Sebastian Dröge
9fd64eee8d
mxfmux: Use the correct edit rate instead of estimating it from the first buffer duration
2009-03-21 10:19:48 +01:00
Sebastian Dröge
6c126cbfdf
mxfdemux: Error out directly if pushing a packet downstream failed
2009-03-21 10:19:48 +01:00
Sebastian Dröge
fc70fb1706
mxfmux: Add support for DV/DIF muxing and add framerate, etc to the caps when demuxing DV/DIF content
2009-03-21 10:19:48 +01:00
Sebastian Dröge
266736817d
mxfmux: Add some debugging and error out on invalid input data
2009-03-21 10:19:48 +01:00
Sebastian Dröge
57ba515539
deinterlace: Fix uninitialized variable compiler warnings
2009-03-21 10:19:48 +01:00
Sebastian Dröge
c5c155884a
mxfmux: Add support for muxing MPEG audio and video
2009-03-21 10:19:48 +01:00
Sebastian Dröge
28e4871217
mxfdemux: Use correct caps type for AC3 audio (audio/x-ac3 instead of audio/ac3)
2009-03-21 10:19:47 +01:00
Sebastian Dröge
654f0627e4
mxfmux: Add support for muxing JPEG2000 code streams
2009-03-21 10:19:47 +01:00
Sebastian Dröge
244c0a4707
mxfmux: Add support for muxing VC-3 (aka DNxHD) video
2009-03-21 10:19:47 +01:00
Sebastian Dröge
60d0dc07bf
mxfmux: Add support for muxing A-Law audio
2009-03-21 10:19:47 +01:00
Sebastian Dröge
0a5dc919fb
mxfmux: Add support for muxing raw audio
2009-03-21 10:19:47 +01:00
Sebastian Dröge
e50039897b
mxf: Add MXF muxer
...
This muxer currently only supports OP1a and is
probably not yet 100% complying to the standards.
2009-03-21 10:19:47 +01:00
Jan Schmidt
cf4485133b
mxfdemux: Fix build on GLib < 2.16 some more
2009-03-18 10:35:43 +00:00
Zaheer Merali
43117a8d86
mxf: Replace g_hash_table_get_values with code working with glib 2.6.
...
Fixes #575565
2009-03-16 17:33:45 +00:00
Tim-Philipp Müller
7a85af3ce6
xdgmime: make xdg typefinder more conservative
...
The whole raison d'etre of this typefinder is to help avoid false
positives when used in combination with our main typefinder in
-base. Its task is not really to typefind audio/video files, even
less so given that it detects *MIME* types, not GStreamer media
types. Therefore, if this typefinder detects an audio or video
type, don't even suggest it - our own typefinders are hopefully
better at this and detect the right type of type on top of that,
and even if they're not we really want to know about it and fix
it. Fixes #575157 .
2009-03-13 22:53:21 +00:00
Wim Taymans
4bff4266d5
rtpbin: don't return FALSE on seek events
...
Silently ignore the seek event instead of returning FALSE.
2009-03-13 16:00:21 +01:00
Josep Torra
6cb429eb4f
mpegpsdemux: workaround to fix playback of certain malformed clips
...
Added a workarround to permit play certain malformed clips where first
SCR is greater than last SCR. Fixes bug #454228
2009-03-13 10:07:18 +00:00
Josep Torra
bfdfc069aa
mpegdemux: Fixed a bug in the TS scanner. Fixes #574009
2009-03-10 21:18:20 +01:00
Jan Schmidt
81a950ddf8
camerabin: Make the tests pass when the camerabin can't initialise.
...
The camerabin tests were throwing glib errors and hanging when
gst-plugins-good elements (jpegenc, videocrop) can't found.
2009-03-07 00:31:07 +00:00
Jan Schmidt
4814c3ca87
camerabin: Partly fix distcheck
...
Don't dist the generated marshal.h header by putting it in the headers
list.
2009-03-07 00:30:23 +00:00
Sebastian Dröge
6b51d475b5
mxfdemux: Store and use the seqnum of the currently running segment everywhere
2009-03-06 17:46:37 +01:00
Sebastian Dröge
424bb07965
mxf: Don't even try to serialize DM frameworks as it will cause an assertion until this is finished
2009-03-06 17:24:03 +01:00
Sebastian Dröge
b5e87b6517
mxf: Don't use NULL GstStructures to prevent warnings
...
Currently serializing of DM Frameworks is not supported
yet by DMS1 and will give us NULL.
2009-03-05 14:40:57 +01:00
Tim-Philipp Müller
3cfe16cc63
photography: declare interface as unstable API by means of a warning
...
Application developers won't know right away which module an interface comes from,
and may assume that it is covered by the usual GStreamer API guarantees, so make
it as clear as possible that this particular API is still subject to change
(should have done that with other libraries in -bad before too really).
2009-03-04 21:30:30 +00:00
Tim-Philipp Müller
c23834eab3
valve: rename plugin file from libfsvalve.* to libgstvalve.*
...
If you're running things uninstalled, you might need to manually
remove the registry to get the plugin's features to show up
correctly. Also, you probably want to do a make clean to get rid
of the old plugin file.
2009-03-04 20:41:10 +00:00
Edward Hervey
6a91eb2f48
gsreal: bring down the rank of the real decoders to MARGINAL.
...
Basically, at this point, the ffmpeg equivalent decoders perform way
better, so we'll make the ffmpeg equivalents PRIMARY and these
MARGINAL.
2009-03-04 20:02:04 +01:00
Josep Torra
ff1a6b4b22
mpegtsdemux: reset sync_lut_len to 0 on READY to NULL
2009-03-04 18:16:31 +00:00
Sebastian Pölsterl
12ac5763f9
mpegtsparse: fix memleak
...
Fix memleak in mpegts_packetizer_clear where MpegTSPacketizerStream is
not freed properly when using foreach_stream_clear function.
2009-03-03 19:08:28 +00:00
Josep Torra
84860befdf
mpegtsdemux: dynamically adjust the sync LUT table
...
Make the sync LUT table adjusted dynamically according to the size
of scanned data. Fixes demuxing buffers of any size.
2009-03-03 18:28:10 +00:00
Olivier Crête
b02708a2f6
autoconvert: Import fsselector from gst-plugins-farsight as autoconvert
...
fsselector is too close to selector, so import is as autoconvert. Not importing
the history because the directory is also called gst/selector and it fails.
2009-03-03 18:53:11 +01:00
Edward Hervey
1068a40d6d
qtmux: Be a bit more verbose in our debug message when failing to renegotiate
2009-03-03 10:12:34 +01:00
Sebastian Dröge
62dbf4b9bc
mxfdemux: Use arrays instead of lists for the metadata registries
2009-03-02 17:00:41 +01:00
Sebastian Dröge
f429818589
xdgmime: Reduce probability to POSSIBLE
2009-03-02 16:29:01 +01:00
Sebastian Dröge
de61b45025
xdgmime: Add locking to the xdg_mime_* calls as it's not thread-safe
2009-03-02 16:27:55 +01:00
Sebastian Dröge
f957ee0aeb
xdgmime: Use g_pattern_match_simple() instead of fnmatch() for Win32 compatibility
2009-03-01 20:18:30 +01:00
LRN
e571138ef6
xdgmime: Fix unused variable compiler warning
2009-03-01 20:13:31 +01:00
Sebastian Dröge
8c4584aa56
xdgmime: Don't warn if we have no MMAP support
2009-03-01 20:12:12 +01:00
Sebastian Dröge
39850d674e
xdgmime: Use g_ntoh[ls] instead of the non-GLib functions for Win32 compatibility
2009-03-01 20:11:07 +01:00
Sebastian Dröge
b30926428d
xdgmime: Use G_BYTE_ORDER instead of relying on LITTLE_ENDIAN to be defined
2009-03-01 20:09:24 +01:00
Tim-Philipp Müller
96a42c80d9
realdec: use gst_plugin_add_dependency()
2009-03-01 00:03:50 +00:00
Sebastian Dröge
ed72bba6a2
mxf: Fix memory leak
...
gst_structure_id_set() will copy GstStructures instead of taking
the ownership.
2009-02-28 20:42:49 +01:00
Sebastian Dröge
b5b2e44563
mxf: Store the metadata type ID inside the class structure
2009-02-28 20:39:42 +01:00
vanista
38dd0f6410
mpegtsdemux: Fix memory leaks when PUSI is missed due to packet loss
...
Fixes bug #573288 .
2009-02-28 19:41:10 +01:00
Edward Hervey
38d3b76d1b
nsf: Don't write further than the limits of the table (size is 75, as defined in the header)
...
gcc 4.3.3 found this one, I'm impressed.
2009-02-28 11:43:56 +01:00
Andrzej Polatyński
22a9d7577f
videoanalyse: Fix brightness calculation to not only use the first rowstride
...
Fixes bug #573391 .
2009-02-27 20:44:20 +01:00
Michael Smith
c0ad05cec4
mpeg4videoparse: Use correct values for checking VO startcode.
...
Fix compiler warning due to condition always being true - since we're
only looking at the final byte of the startcode (not the leading
0x000001), only check for < 0x1f, not < 0x11f
2009-02-27 11:36:58 -08:00
Sebastian Dröge
546bfbecb8
xdgmime: Use empty caps for registering the typefinders with old core versions
...
core before 0.10.22.1 produced assertions when storing typefind factories
with NULL caps in the registry.
2009-02-27 20:21:23 +01:00
Wim Taymans
41b65b421b
mpeg4videoparse: handle more formats
...
We only need a Video Object Start code before we can start pushing out data.
Search for this code also instead of only looking for VOS and VOP.
Fixes #572551 .
2009-02-27 13:08:15 +01:00
Stefan Kost
fab9dfa5d0
camerabin: rework signaling and tests
...
Revert the GString change. There are no marshallers for it. A better change is
now described in http://bugzilla.gnome.org/show_bug.cgi?id=573370 .
Test should work again.
2009-02-27 12:35:14 +02:00
Stefan Kost
5f2d5aa5a5
baseparse: revert last change and properly fix
...
Baseparse internaly breaks the semantics of a _chain function by calling it with
buffer==NULL. The reson I belived it was okay to remove it was that there is
also an unchecked access to buffer later in _chain. Actually that code is wrong,
as it most probably wants to set discont on the outgoing buffer.
2009-02-27 12:27:14 +02:00
David Schleef
becb7fd02c
Add v210 format
2009-02-26 12:49:03 -08:00
David Schleef
0964c00d2b
Fix incorrect "pixel_aspect_ratio" in caps
...
Should be "pixel-aspect-ratio".
2009-02-26 12:49:03 -08:00
Olivier Crête
8961f43ec8
gstrtpbin: Don't forward revc events to sender
...
Don't send events from the receiver to the sender side.
Fixes #572900 .
2009-02-26 13:10:29 +01:00
Stefan Kost
68cb1a84de
baseparse: remove checks for buffer==NULL
...
Accordifn to docs for GstPadChainFunction buffer cannot be NULL. If we would
leave the check, we would also need more such check below.
2009-02-26 11:05:31 +02:00
Stefan Kost
53f975f63c
docs: various doc fixes
...
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
2009-02-25 12:42:36 +02:00
Wim Taymans
9a0e1e0dca
mpegdemux: don't ignore GstFlowReturn values
...
don't ignore the return value of pull_range because we only get a valid non-NULL
buffer when the return value is GST_FLOW_OK. Avoids a crash when the pipeline is
shutting down.
2009-02-25 11:34:45 +01:00
Stefan Kost
518d98899e
camerabin: update signal marshaller and docs
...
Use GString instead of GPointer for the marshaller as this is what the callback uses.
Slightly reformat docs.
2009-02-25 11:41:36 +02:00
Lasse Laukkanen
c81bce2b21
camerabin: unblock correct pad in reset, support fakesink as view finder
2009-02-25 10:45:19 +02:00
Sebastian Dröge
ab1c576ec2
xdgmime: Add new typefinder based on xdgmime
...
This typefinder is mostly useful to filter out any false positives
by the other typefinders like the usual Word document misdetected as
MP3 file.
2009-02-24 15:26:27 +01:00
Edward Hervey
c2c1941ffc
liveadder: Fix build on macosx
2009-02-23 15:25:03 +01:00
Lasse Laukkanen
bde8707b65
camerabin: Add aspect ratio capsfilter for view finder
...
If dealing with larger frame sizes than view finder sink element
accepts then maintain aspect ratio when scaling frames to fit.
2009-02-23 14:20:13 +02:00
Lasse Laukkanen
24d99bbe56
camerabin: Scale incoming frames if their size does not match requested size
...
If capture preparation in videosrc results in frame size different
from requested size, then we need to scale them.
2009-02-23 14:20:12 +02:00
Edward Hervey
6227900c71
dccp: Fix "non-void without return value" compilation issue.
2009-02-22 22:00:58 +01:00
Andoni Morales
7992233522
camerabin: Fix compilation on Windows with Visual Studio
...
Windows doesn't have strcasecmp so we should use
g_ascii_strcasecmp here instead.
Also Windows doesn't have sys/time.h so we first
need to check if it actually exists and if not
we should not include it.
Fixes bug #572315 .
2009-02-22 18:41:08 +01:00
Olivier Crête
00a155333c
Moved rtpmux from gst-p-farsight to -bad
2009-02-21 17:50:35 +01:00
Olivier Crête
ad4d98d70c
Re-indent to Gst style
2009-02-21 17:48:57 +01:00
Olivier Crête
fe071273c4
[MOVED FROM GST-P-FARSIGHT] Document rtp muxer a bit
2009-02-21 17:48:57 +01:00
Laurent Glayal
0bff57a395
[MOVED FROM GST-P-FARSIGHT] Add signals before stream lock and after unlocking
2009-02-21 17:48:57 +01:00
Olivier Crête
a34534df79
[MOVED FROM GST-P-FARSIGHT] Let ssrc through getcaps
2009-02-21 17:48:57 +01:00
Olivier Crête
2c83849849
[MOVED FROM GST-P-FARSIGHT] Rename have_base to have_ts_base
2009-02-21 17:48:57 +01:00
Olivier Crête
7a222b560e
[MOVED FROM GST-P-FARSIGHT] Protect the seqnum with object lock in rtpmux
2009-02-21 17:48:57 +01:00
Olivier Crête
d0c7c0fc6c
[MOVED FROM GST-P-FARSIGHT] Remove unused sink_ts_base
2009-02-21 17:48:57 +01:00
Olivier Crête
f5a8eb59af
[MOVED FROM GST-P-FARSIGHT] Have getcaps to force the same clockrate on all pads
2009-02-21 17:48:57 +01:00
Olivier Crête
44b6071bd7
[MOVED FROM GST-P-FARSIGHT] Validate RTP data in RTP Mux
2009-02-21 17:48:56 +01:00
Olivier Crête
4bfd3b4561
[MOVED FROM GST-P-FARSIGHT] Remove unused clock-rate property
2009-02-21 17:48:56 +01:00
Olivier Crête
10f623547f
[MOVED FROM GST-P-FARSIGHT] Clarify locking in rtpdtmfmux
2009-02-21 17:48:56 +01:00
Laurent Glayal
31ba19c159
[MOVED FROM GST-P-FARSIGHT] Missing format parameter
2009-02-21 17:48:56 +01:00
Olivier Crête
a68ed1d223
[MOVED FROM GST-P-FARSIGHT] Remove .git-darcs-dir files
2009-02-21 17:48:56 +01:00
Håvard Graff
d5f589c82f
[MOVED FROM GST-P-FARSIGHT] Update seqnum base in rtp muxer
...
With help from Wim
2009-02-21 17:48:56 +01:00
Håvard Graff
272f888d9c
[MOVED FROM GST-P-FARSIGHT] Fix some more leaks
2009-02-21 17:48:56 +01:00
Håvard Graff
4749d03a1d
[MOVED FROM GST-P-FARSIGHT] Fix leak
2009-02-21 17:48:56 +01:00
Olivier Crête
363861fac6
[MOVED FROM GST-P-FARSIGHT] Don't unref caps we don't know (thanks Wim)
2009-02-21 17:48:55 +01:00
Olivier Crête
9609426eda
[MOVED FROM GST-P-FARSIGHT] Put per-buffer debug at level LOG
2009-02-21 17:48:55 +01:00
Olivier Crête
95ea8a98fb
[MOVED FROM GST-P-FARSIGHT] Make debug print accurate
2009-02-21 17:48:55 +01:00
Olivier Crête
498635f9b1
[MOVED FROM GST-P-FARSIGHT] Set our caps on the buffers
2009-02-21 17:48:55 +01:00
Olivier Crête
fed3e1c5e8
[MOVED FROM GST-P-FARSIGHT] Take the clock-base stored from the last setcaps
2009-02-21 17:48:55 +01:00
Olivier Crête
1875f490c5
[MOVED FROM GST-P-FARSIGHT] Store the clock-base on setcaps
2009-02-21 17:48:55 +01:00
Olivier Crête
963cec9458
[MOVED FROM GST-P-FARSIGHT] Add padprivate to the request pads
2009-02-21 17:48:55 +01:00
Olivier Crête
4e110b544f
[MOVED FROM GST-P-FARSIGHT] Remove whitespace in gstrtpmux
2009-02-21 17:48:55 +01:00
Olivier Crête
b2f71c2401
[MOVED FROM GST-P-FARSIGHT] Make indentation more correct
2009-02-21 17:48:54 +01:00
Olivier Crête
abbdf7c22f
[MOVED FROM GST-P-FARSIGHT] Fix typo
2009-02-21 17:48:54 +01:00
Olivier Crête
38e339a135
[MOVED FROM GST-P-FARSIGHT] Set seqnum-base and clock-base in caps from rtpmuxer
2009-02-21 17:48:54 +01:00
Zeeshan Ali
0b710c450a
[MOVED FROM GST-P-FARSIGHT] more debug
...
20070815135038-f3f1e-9c7a5490a525c6e8753cb1b8c03354df99132b5c.gz
2009-02-21 17:48:54 +01:00
philippe.kalaf@collabora.co.uk
2f4758bb95
[MOVED FROM GST-P-FARSIGHT] Sync jitterbuffer with CVS -bad
...
20070823212225-2425b-0fe69bf72539678dda45d615a09f1cbf502cc71a.gz
2009-02-21 17:48:54 +01:00
Youness Alaoui
03aa705cb3
[MOVED FROM GST-P-FARSIGHT] missing comment
...
20070820185032-4f0f6-0ab67b6ac40dd4e35a8fe53f3cb6daff65ce43b9.gz
2009-02-21 17:48:54 +01:00
Olivier Crete
620b63a407
[MOVED FROM GST-P-FARSIGHT] Make buffer writable before writing into it
...
20070712195336-3e2dc-91a5fb797cfa4919d4e2f9a728c6d6fbd3b83d93.gz
2009-02-21 17:48:54 +01:00
Olivier Crete
76fb00c0b1
[MOVED FROM GST-P-FARSIGHT] Set pads active when adding them to a potentially running element
...
20070706202459-3e2dc-a3731f885725594def0a7be997fc7b3a739ee967.gz
2009-02-21 17:48:54 +01:00
Olivier Crete
6750edd1d8
[MOVED FROM GST-P-FARSIGHT] Fix multiple ref leaks (patches by SP GLE)
...
20070607120121-3e2dc-061e9ef7a47b1b84fa8f8092f4b8bcc0e6db8c8c.gz
2009-02-21 17:48:53 +01:00
Zeeshan Ali
7d12ea7ba8
[MOVED FROM GST-P-FARSIGHT] send event to all src pads
...
20070528152505-f3f1e-039216c73dc93f64c49962c77a0253cb9cfec4d3.gz
2009-02-21 17:48:53 +01:00
Zeeshan Ali
1cbe838100
[MOVED FROM GST-P-FARSIGHT] print a warning if receive an error iterating sinkpads
...
20070528123749-f3f1e-4c1eb3f511b5610143610a65a94d117f2c3d2580.gz
2009-02-21 17:48:53 +01:00
Zeeshan Ali
5d86b44cd5
[MOVED FROM GST-P-FARSIGHT] deal with all the gst_iterator_next() return values
...
20070528122808-f3f1e-d301644c3be7633ec6dc5e28596e9346d2da6a50.gz
2009-02-21 17:48:53 +01:00
Zeeshan Ali
b6dc9f9bf2
[MOVED FROM GST-P-FARSIGHT] Return correct value from the event handler
...
20070525123116-f3f1e-131b37b5f4521618fe2f1320409a47e65b35ad2d.gz
2009-02-21 17:48:53 +01:00
Zeeshan Ali
30a1e01518
[MOVED FROM GST-P-FARSIGHT] Ville's original patch to fix the traversal of dtmf event
...
20070525102709-f3f1e-6c41d1ef934068a4f4e810e7e981b420075b0c98.gz
2009-02-21 17:48:53 +01:00
zeeshan.ali@nokia.com
8c4e0c21ce
[MOVED FROM GST-P-FARSIGHT] Set the correct ts-offset on the get_prop value
...
20070329135250-65035-a43e222d91d57c0a61cb3287586aaa29abf78674.gz
2009-02-21 17:48:53 +01:00
zeeshan.ali@nokia.com
dd7639beb6
[MOVED FROM GST-P-FARSIGHT] Refactorize state_change
...
20070329135223-65035-23a0107b2e397710f035c6e88cc0e49b65bb4d5d.gz
2009-02-21 17:48:53 +01:00
zeeshan.ali@nokia.com
f224378822
[MOVED FROM GST-P-FARSIGHT] set SSRC on the packets
...
20070329133622-65035-1be6e0aa85a71389f7d257b9cd3e13a73d6b745b.gz
2009-02-21 17:48:53 +01:00
zeeshan.ali@nokia.com
67c77c8029
[MOVED FROM GST-P-FARSIGHT] Code clean-up and more debug output
...
20070329131936-65035-9d499e209e0d7a409c3aa0d1040778babf076179.gz
2009-02-21 17:48:52 +01:00
zeeshan.ali@nokia.com
c950d2323c
[MOVED FROM GST-P-FARSIGHT] Use own clock-base
...
20070328112219-65035-1ba5fefbc65059e9b0c860528a31062ceb6a7331.gz
2009-02-21 17:48:52 +01:00
zeeshan.ali@nokia.com
45c083c2df
[MOVED FROM GST-P-FARSIGHT] Only accept RTP streams that have the same clock-rate
...
20070323163139-65035-fc0b17b0b8a7a041f48994c4f26e96568168bf95.gz
2009-02-21 17:48:52 +01:00
zeeshan.ali@nokia.com
a7afa08394
[MOVED FROM GST-P-FARSIGHT] Some more code-cleanups
...
20070322161552-65035-bda96165e146b4f1d5fea1cc9576a7ab3abebc9e.gz
2009-02-21 17:48:52 +01:00
zeeshan.ali@nokia.com
7b99c695aa
[MOVED FROM GST-P-FARSIGHT] return newpad instead of NULL and warn if failed to create a pad
...
20070322154251-65035-cdb6651e61c2eb0205cc8c24693b43f98a2da718.gz
2009-02-21 17:48:52 +01:00