Small micro-optimisation: look up value table for fundamental types
via an array dedicated to fundamental types instead of going through
a hash table lookup. Since there can be only 255 fundamental types,
the table size/efficiency trade-off should be acceptable, esp. since
the most commonly-used types are all fundamental types. The size of
the table could probably be minimised further if needed by allocating
the table dynamically and only expanding it on demand.
GTypes are not ints and as such are not guaranteed to fit into an int
(with the exception of fundamental types), so we really shouldn't put
them into int variables. Even if a rather unlikely obscure corner case,
this has actually been a problem at some point in the past, see commit
99f16655f4.
Add a bunch of vararg getter convenience functions to complement
the vararg setter functions, and a basic unit test. Fixes#534208.
API: gst_structure_get()
API: gst_structure_id_get()
API: gst_structure_get_valist()
API: gst_structure_id_get_valist()
Don't dump hundreds of kB of hexdata into debug logs when converting
taglists containing huge images into a string. Instead, shorten the
buffer data so that the string is still readable and debug logs
stay managable. Can be turned off with GST_DEBUG_OPTIONS=full-tags.
See #584988.
The first time one calls gst_element_factory_make(), gst recreates the plugin
feature and the element factory. As a side effect we ref the class to fill
in detail we already have filled from the registry cache. This patch changes
the behaviour to just update the existing entries. The factory is now attached
to the type and set in gst_element_base_class_init().
Add a GType->GstValueTable hashtable mapping.
Avoid _get_type() multiple times when we can.
Use GSlice for fraction range dynamic memory
Add G_LIKELY when we can
Improve lookup of the value table using the hashtable
Fix some memory leaks shown by the new serialisation/deserialisation unit
test. Split the gst_string_wrap function in gstvalue.c into components and
use them to make gst_string_take_and_wrap, which takes ownership of the
string, avoiding a strdup.
Add some G_LIKELY/UNLIKELY, and clean up some leaks in error paths.
Reword this message a bit to make it clearer what it means, namely that
the state change may have failed for good reasons, but that the element
just failed to post a proper error on the bus. This is not an internal
GStreamer bug, and we really don't need people to flood bugzilla with
bug reports if one such plugin bug ever makes it into the wild.
Add gst_segment_to_position() that converts a running_time to a position in the
segment. A faulty variant of this function is currently used in inputselector
but we'll need it for frame stepping too.
API: GstSegment::gst_segment_to_position()
Use string_warp/unwrap to escape delimiters, otherwise deserialisation fails.
Also move GST_ASCII_IS_STRING to private header to avoid keeping it in sync.
Also use '\0' when terminating a string for better readability.
Update framestep document, we want to pass the flush flag in the step-done
message.
Add flush flag to the gstmessage.
Update examples to use the new step-done message api.
Implement framestep with playback rates < 0.0 too.
Add new STEP event and methods for creating/parsing the event
Update design docs.
Add new STEP_DONE message and method to create/parse.
API: GstEvent::gst_event_new_step()
API: GstEvent::gst_event_parse_step()
API: GstMessage::gst_message_new_step_done()
API: GstMessage::gst_message_parse_step_done()
Fixes minor memory leak in unit tests caused by the recent changes.
Since we're expected to take ownership of the GValue in the structure
field struct here, we need to unset it if we don't use it.
Make gst_tag_list_get_string() return FALSE for NULL strings and
empty strings, and gst_tag_list_get_pointer() return FALSE for
NULL pointers, like we do with dates and buffers.
Fixes#560345.
Also warn if an element or application tries to add a field with an
empty string to a structure (NULL strings are still needed and
allowed though) and do all those checks in the right function.
Fixes#559643.
Use gst_structure_id_empty_new() in combination with GST_QUARK
rather than gst_structure_id_new() when creating message, event,
query and taglist structures. Mostly just because we can.
Use the element START_TIME to keep track of the running time when the pipeline
paused so that it can be used to restore the base_time.
Take the start_time before setting the children to PAUSED so that we can
distribute the start_time to the children.
Add a start_time field and some methods. The start_time will contain the
running_time of when the element last went to paused. This time can be user to
report the position in PAUSED but also to do more correct clipping and
stepping later.
This reverts commit bebfde7502.
This change shouldn't be done in a stable release series as
applications are actually expecting the sender to be an
GstElement. One example is totem.
Unset the running flag after we released the lock for posting the stream-status
message. If we set the running flag to FALSE too early, the join method will
just continue without waiting for the message to be posted, leading to potential
crashes.
When writing a cache chunk fails, we were freeing the node and jump to a final
cleanup which dereferenced a null pointer. Leve freeing the node to the cleanup
code in fail_free_list. (sorry for committing wrong fix before).
When writing a cache chunk fails, we were freeing the node and jump to a final
cleanup which dereferenced a null pointer. Leve freeing the node to the cleanup
code in fail_free_list.
Move MT safety to main description (it does not belong to Return: or Since:
statement). Add a few missing return docs. Downgrade a normal comment froma doc
comment. Fix a doc header to only contain symbol name.
The padding of GstClock is a GstClockTime and not a
gpointer, so adding a pointer requires the padding
size to be changed depending on the pointer size.
Use an union instead.
Fixes bug #582878.
Add a gst_element_lost_state_full() with an extra argument to control
distribution of a new base_time. We will need this for flushing step
operations.
API: GstElement::gst_element_lost_state_full()
dot does not take the head/tail labels into account. For unfixed caps they get
quite large. Double the padding to make it sort of readable in more cases. Also
make normal font bigger and caps-label font smaller to increase our luck.
Possibly fixes GObject class creation/unref race conditions when
creating the last-message string in fakesink for events with
structures that have fields with these enum types.
If deserializing a property fails, check if the value type is a string and if so
attempt to create a bin from the string value. This allows to e.g. specify
audio-sink/video-sink for playbin on gst-launch commandline.
Reuse buffer code for bufferlists. Not sure if this measurably impacts performance
for the simple buffer case, if it does after doing some benchmarks, we can
decouple it later.
Fixes#572285
Buffer lists are a means to manage disjoint buffers as one buffer. It's also
possible to put many of those buffers into a list.
The idea is that when support is added to various elements, we will be able to
more efficiently slice and dice buffers, reduce the amount of memcpy and also
reduce data passing overhead.
The implementation is kept simple on purpose, reusing all of the memory
management features we have for miniobjects and buffers.
Access to the bufferlist object is done with an iterator, which allows for
efficient iteration and modification of the list.
See #572285
When an element lost its state but was busy doing a state change, still post the
async-start message with the base_time reset flag or else we might end up with
an old base_time.
this can happen when a sink is goin async to paused and then a flushing seek is
performed. This would cause the base_time to remain unmodified because the
async-start message was not sent.
Remove the static function set on the TaskPool before _prepare() is called and
allow for assigning a function to a Task when we _push().
Update the examples
Post a stream-status message indicating that a new task was created so that the
application has a chance to change the properties of the task.
Fix unit test to take into account the new ref of the message.
Call the leave_thread callback before we signal the thread performing the _join
so that we can be sure that the listener still has valid info in the callback.
The printf extension mechanism changed in glibc 2.10, and the older
register_printf_function is deprecated. Detect and use the new
mechanism where available.
When its disabled, we poison some symbols to force a build error if they are
used. Dunno how useful this acually is, but we need to disable the poisoning
when we include this ourself. Also don't define some of the dummies, as they
are getting replaced with defines and that creates code that does not compile.
gst_static_pad_template_get_caps () actually returns a reference to the
caps and it's cleaner to unref them after usage. The core will, however,
always hold a reference to the caps so this didn't result in a memory
leak.
And, for our release manager, the in-commit-message keywords
for the previous commit:
API: GST_PARAM_MUTABLE_READY
API: GST_PARAM_MUTABLE_PAUSED
API: GST_PARAM_MUTABLE_PLAYING
API: gst_param_spec_is_mutable
When we get an ASYNC_DONE message when a state change was busy, set the
pending_async_done flag so that after the state change completes, the bin can
check if all async elements are finished. Don't only do this for the bin itself
but for all elements.
This fixes some bins in bins that simulate async state changes by posting ASYNC
messages (such as sdpparse in uridecodebin/playbin2).
Two new log levels to dump FIXMEs into the log and to log data
in form of a hex dump (#578114).
API: GST_CAT_FIXME_OBJECT
API: GST_CAT_MEMDUMP_OBJECT
API: GST_CAT_FIXME
API: GST_CAT_MEMDUMP
API: GST_FIXME_OBJECT
API: GST_MEMDUMP_OBJECT
API: GST_FIXME
API: GST_MEMDUMP
If that block is entered, then start_time becomes GST_CLOCK_TIME_NONE.
Since start_time is invalid, the code will enter the block at line 434 and
new_base_time will be set there.
Move the checks for using an unscheduled entry from the unsafe GstClock to the
SystemClock object so that we can perform the correct locking.
fix a leak and potential deadlock then the async thread fails to start.
Sprinkle some G_LIKELY around because we can.
Keep a counter for the amount of outstanding wakeups that we produce and only
perform a write/read to the control socket when 1 or 0 respectively.
don't poll when waiting for the entries to be unblocked and clear their wakeup
counts, just act on the signal when the wakeup count is 0.
unscheduled entries will clear their wakeup count themselves.
Keep track of when we wakeup the async thread because the list of entries has
changed.
don't try to see if the list changed because we can't really know when one entry
is added multiple times.
Only wake up the async thread when we add an async entry to the head of the list
and the old entry was BUSY.
when an entry being waited on in the async thread is unscheduled, clear the
wakeup queue so we can continue waiting on other entries.
When an entry being waited on in the async thread is unlocked because an earlier
entry was added to the list, set the entry to OK again. This makes sure that
only the entries being waited on have the BUSY flag set and wake up the timer
poll when they are unscheduled.
Yes, 'codec' isn't exactly the best word, but let's be consistent with AUDIO_CODEC
and VIDEO_CODEC (which may be 'raw' formats as well after all). Prerequisite for
bug #576552.
Running configure with e.g. --disable-dst-debug was compiling out the debug
system (ABI break). Now stubs are added and only if one does e.g.
make CFLAGS="-DGST_REMOVE_DISABLED" the symbols are ommitted.
Move the gst_pad_can_link() implementation from gstutils to gstpad and use
gst_pad_link_prepare() to make it work correctly and also check the caps.
Make the broken implementation in gstutils static.
Small cleanups in the _get_fixed_caps() function.
Fixes#575682.
Fixes build with -Werror caused by '_FILE_OFFSET_BITS redefined' warning on
OpenSolaris where _FILE_OFFSET_BITS may be defined both in our config.h
and via stdio.h (#575695).
Bin collects segment-start messages and segent-done messages. it posts a
segment-done message to its parent, once it has received a segment-done for
each segment-start. Imho it should also send a segment-start if it receives the
first segment start and if parent is !=NULL. This is needed for bins in bins,
so that also higher order bins can group segment-starts and segment-dones.
Right now higher order bins will post a segment-done for each segment-done
received.
Long caps fields like enums are ellipsised. If caps are not negotiated, use
head- and taillabel to place them closer to the pads. Use smarter way to indent.
Keep track of when a new callback is installed in the callback and call the new
callback in that case.
Add unit test for checking pad blocking.
Fixes#573823.
When de/activating a pad in pull mode the pad needs to de/activate the
peer pad it is connected to, failure to be able to do this in activation mode
is an error.
However if there is no peerpad, we can still deactivate the pad correctly and
assume the application will deactivate the unlinked peer pad eventually.
Fixes#574163.
This will be mostly useful in all elements that have some kind of internal
seek/index table. Currently almost all of them (or even all of them)
are using a linear search although the used array is already sorted,
wasting some CPU time without good reason.
Fixes bug #573623.
unref and copy functions are sometimes used as function
pointers for example in the case of g_hash_table_new_full
as a GDestroyNotify function.
Currently GstBuffer, GstEvent, GstMessage and GstQuery
define their respective unref and copy functions as
macros, making use of gst_mini_object_unref/copy.
This approach works very well for most cases, except
for some automatically generated bindings (currently Vala),
where the memory management semantics are defined
declaratively.
The possible solutions would be to either convert all
the macros into static inline function, or change the
signature of gst_mini_object_unref to take a void*
instead of a GstMiniObject*.
Fixes bug #572480.
Add a GST_MESSAGE_REQUEST_STATE that can be posted by element when they would
like to have the application change the state of the pipeline. the primary use
case is to pause the pipeline when an audio mixer is mixing a higher priority
stream but it can also be used for other purposes.
Add some docs and a unit test.
Implement the REQUEST_STATE message in gst-launch.
API: gst_message_new_request_state()
API: gst_message_parse_request_state()
API: GST_MESSAGE_REQUEST_STATE
When the target pad disappears (because it was explicitly unlinked or the
element was removed/unreffed) make sure we receive a notify with the unlink
function on the proxy pad and clear the target. We use a simple flag to not do
this and cause deadlocks when the target was changed explicitly using the
ghostpad functions.
Update the unit test because we now unref the target sooner (and correctly).
This tag will list a homepage for the media,
i.e. the artist's or movie's homepage.
This is different to GST_TAG_LOCATION as the latter
lists the original location of the media.
Fixes bug #571227.
The previous commit was bogus, as was the check before. We just point m to the file data,
so neither it nor its members will be NULL. Better check if we have enough data.
Add a property to select the clock type, currently REALTIME and MONOTONIC when
posix timers are available.
Implement the systemclock with GstPoll instead of GCond. This allows us to
schedule timeouts with nanosecond precission on newer kernels and with ppoll
support. It's also resilient to changes to the systemclock because of NTP or
similar.
Add a special timer mode in GstPoll that makes it only use the control socket
with a timeout to schedule timeouts. Also add a pair of methods to wakeup the
timeout thread.
API: GstPoll::gst_poll_new_timer()
API: GstPoll::gst_poll_write_control()
API: GstPoll::gst_poll_read_control()
Remove class-to-interface-struct cast macros which don't work,
don't make sense, and in some cases wouldn't even compile if
used. Removal should be ok seeing that code which uses any of
these is broken and bound to crash. Fixes#565607.
API: remove GST_IMPLEMENTS_INTERFACE_CLASS
API: remove GST_IS_IMPLEMENTS_INTERFACE_CLASS
API: remove GST_URI_HANDLER_CLASS
Allocate every structure that is directly written to the binary
registry with g_malloc0(). Otherwise some parts of it will be
uninitialized (struct padding because of alignment, etc) and
valgrind will complain about it.
Add a new variable that keeps track of the status of the control socket. This
allows us to avoid doing a read() on the control socket when we did not write
anything to it.
Fixes#568438.
Link libgstreamer with $(LIBM) as it uses math functions.
Add a configure check for socket and nsl library and add
them to LIBS if they're found. This is needed on Solaris
for socket() and gethostbyname().
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_set_main_context), (gst_bus_create_watch):
Fix order of members in GstBusSource structure - the first member
must be the parent structure ie. GSource. Should make bus sources
attached to non-default main contexts work in all cases now (ie.
primarily in cases where the callback has a non-NULL user data
argument). Fixes#562170.
* tests/check/gst/gstbus.c: (test_custom_main_context):
Add unit test for the above, based on code by
Justin Karneges <justin at affinix com>.
Original commit message from CVS:
* gst/gst.c:
Create a registry if there is none also when the option for
gst-disable-registry-update has been selected. Fixes#567002
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_wakeup_main_context):
The lock order should be maincontext > OBJECT_LOCK so we need to release
the object lock when waking up the mainloop to avoid deadlocks.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_set_index_func), (gst_bin_set_clock_func),
(gst_bin_change_state_func):
Use an iterator to set the clock and the index so that we can release
the object lock appropriately. Fixes#566393.
Original commit message from CVS:
* gst/gstindex.c: (gst_index_get_type):
Add a debugging category for GstIndex, first little step in making
indexing top-notch.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_pads_activate):
* gst/gstobject.c: (gst_object_dispatch_properties_changed):
* gst/gstutils.c: (gst_pad_proxy_getcaps), (gst_pad_proxy_setcaps),
(gst_pad_add_data_probe_full), (gst_pad_add_event_probe_full),
(gst_pad_add_buffer_probe_full), (gst_pad_remove_data_probe),
(gst_pad_remove_event_probe), (gst_pad_remove_buffer_probe):
Assign debug statements to relevant categories instead of the 'default'
category so they don't get lost in debugging.
Original commit message from CVS:
* gst/gstdebugutils.c:
Add some ideas, how to make the graph smaller.
* gst/gstutils.c:
Add a comment from a debug session.
* libs/gst/base/gstbasetransform.c:
Log more context.
* libs/gst/controller/gstinterpolationcontrolsource.c:
Indet.
* plugins/elements/gstcapsfilter.c:
Fix typo in docs.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_dispose), (gst_bus_get_property),
(gst_bus_wakeup_main_context), (gst_bus_set_main_context),
(gst_bus_post), (gst_bus_source_prepare), (gst_bus_source_finalize),
(gst_bus_create_watch):
Make GstBusSource work with non-default main contexts (#562170).
* tests/check/gst/gstbus.c: (message_func_eos), (message_func_app),
(test_watch), (test_watch_with_custom_context), (gst_bus_suite):
Add test case for GstBusSource with a non-default main context.
* tests/check/libs/.cvsignore:
Ignore more.
Original commit message from CVS:
* gst/gstregistrybinary.c: (unpack_element), (unpack_const_string),
(unpack_string)::
Wrap multi-line macros in G_STMT_{START|END}.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstquark.c:
* gst/gstquark.h:
* gst/gstquery.c: (gst_query_new_uri), (gst_query_set_uri),
(gst_query_parse_uri):
* gst/gstquery.h:
API: Add URI query type. This is useful to query the URI
of a sink/source element and can be used by demuxers that
need to get data from other files.
This query should go upstream by default.
Fixes bug #562949.
* plugins/elements/gstfdsink.c: (gst_fd_sink_query):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_query):
* plugins/elements/gstfilesink.c: (gst_file_sink_query):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_query):
Implement URI query.
Original commit message from CVS:
* gst/gstghostpad.c:
* tests/check/gst/gstghostpad.c:
Don't forward gst_pad_set_caps() on a source ghostpad to its target.
That would cause the ghostpad to emit notify::caps two times (fist
from gst_pad_set_caps() and after from on_src_target_notify()).
Original commit message from CVS:
* gst/gstghostpad.c:
* tests/check/gst/gstghostpad.c:
In a source ghostpad, when caps are changed in the target pad, the
change needs to be reflected in the ghostpad.
Fixes#564863.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_found_tags_for_pad):
Add FIXME for 0.11 to set the pad as message source and not
the element. Otherwise it's impossible to detect for which
pad the tags were found without adding an event probe
or something similar to the pad.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttagsetter.c:
* gst/gsttagsetter.h:
Rename api added in previous commit and add since tag to docs.
API: gst_tag_setter_reset_tags()
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttagsetter.c:
* gst/gsttagsetter.h:
Add function to reset tagsetter for element reuse.
API: gst_tag_setter_flush()
Original commit message from CVS:
* gst/gsttaglist.c:
* tests/check/gst/gsttag.c:
More complete unit tests. Fix handling of empty taglists (they were
not merged before).
Original commit message from CVS:
* gst/gsttaglist.h:
* gst/gsttagsetter.c:
Update GstTagSetter and GstTagMergeMode documentation. Mention
that tags can come from events and from application. Fix example.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_get_compatible_pad):
Check if the caps of the pads are compatible before returning
a pad and claiming it is compatible. This, among other things,
fixes a bug with gst-launch where an incompatible pad is chosen
and linking fails. Fixes bug #544003.
Original commit message from CVS:
Patch by: 이문형 <iwings at gmail dot com>
* gst/gstpoll.c: (gst_poll_fd_ctl_write), (gst_poll_fd_has_error):
Adds support for FD_CONNECT event (win32). See #562258.
Original commit message from CVS:
Patch by: Simon Holm Thøgersen <odie at cs dot aau dot dk>
* gst/gstregistry.c: (gst_registry_scan_path_level):
Reduce the number of stat() calls for every file from three times
to one time. Fixes bug #560360.
Original commit message from CVS:
* gst/gstregistrybinary.c:
In win32 codepath, if we fail to write the registry, create the
directory for it and try again, matching the behaviour in non-win32
codepaths.
Original commit message from CVS:
* gst/gstquery.c:
* gst/gstquery.h:
Add GstQueryType for custom queries instead of having to use the
not-so-very-convenient registration infrastructure to register new
types.
Original commit message from CVS:
Patch by: Andrew Feren <acferen at yahoo dot com>
* gst/gstobject.c: (gst_object_default_deep_notify):
Unref the GEnumClass after usage again. Fixes bug #561501.
Original commit message from CVS:
* gst/gstbin.c: (_gst_boolean_accumulator), (gst_bin_class_init),
(gst_bin_recalculate_latency), (gst_bin_do_latency_func),
(gst_bin_change_state_func):
* gst/gstbin.h:
Add do-latency signal with the old default fallback implementation. This
allows for custom latency calculations for when the default is not
sufficient.
API: GstBin::do-latency signal.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c: (gst_bin_recalculate_latency),
(gst_bin_change_state_func):
* gst/gstbin.h:
Add method to recalculate and redistribute the latency on a bin.
API: gst_bin_recalculate_latency().
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_finalize):
Avoid costly typechecking for trivially correct pointers.
* gst/gstpoll.c: (gst_poll_wait):
Add some G_LIKELY here and there.
* libs/gst/base/gstadapter.c: (gst_adapter_push):
Add some debug info.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_write_chunk),
(gst_registry_binary_initialize_magic),
(gst_registry_binary_write_cache),
(gst_registry_binary_check_magic):
* gst/gstregistrybinary.h:
Don't write and check a CRC for the binary registry file. It's
guaranteed that the registry is completely written (it's first written
to a temporary file and then moved) and if the registry was corrupted
by some hardware failure we would have bigger problems.
Bump binary registry version to 0.10.21.1 for this as it's an
incompatible change and to ensure that the registry gets rebuild
after the update.
This saves some milliseconds for reading/writing the registry.
Fixes bug #560399.
Original commit message from CVS:
* gst/gstvalue.c: (gst_type_is_fixed), (gst_value_is_fixed):
Reorganize some more, be more conservative with the GST_TYPE_ARRAY not
being fixed and inline the trivial check.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_copy), (_gst_caps_free),
(gst_caps_merge_structure), (gst_caps_get_structure),
(gst_caps_copy_nth), (gst_caps_set_simple),
(gst_caps_set_simple_valist), (gst_caps_is_fixed),
(gst_caps_is_equal_fixed), (gst_caps_intersect),
(gst_caps_subtract), (gst_caps_normalize), (gst_caps_do_simplify),
(gst_caps_to_string):
Callgrind micro optimisations.
Avoid array bounds checks and force inline of trivial function.
* gst/gstobject.c: (gst_object_set_name_default):
-1 is equivalent to letting glib to the strlen but then there is more
room for optimisations and it's not our fault.
* gst/gststructure.c: (gst_structure_id_empty_new_with_size):
no need to clear the array, we're cool.
* gst/gstvalue.c: (gst_type_is_fixed), (gst_value_is_fixed):
The most common _is_fixed() check is done on fundamental glib base
types so we check this first instead of doing a huge amount of
useless GST_TYPE_ARRAY calls.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_empty_new_with_size):
No need to memset, we can clear the value ourselves.
* gst/gstvalue.c: (gst_type_is_fixed),
(gst_value_get_compare_func):
Some optimisations from a few callgrind sessions:
When checking if a type is fixed, check for trivial fundamental types
first before checking types for which we need to get the type followed
by the heavy duty type checks, this reduces the amount of
g_type_fundamental() calls a lot.
When getting the compare function, first check for our registered types.
If that fails, do the heavy duty g_type_is_a() checks, reduces the
amount of g_type_is_a() considerably.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_start),
(gst_bin_handle_message_func), (gst_bin_query):
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Copy seqnums from events to messages so that they can all be related
back to eachother.
Original commit message from CVS:
2008-11-04 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c (gst_util_seqnum_next): Refactor for clarity.
Also add API: to previous changelog entry.
Original commit message from CVS:
2008-11-04 Andy Wingo <wingo@pobox.com>
Add sequence numbers to events and messages. See #559250.
* gst/gstutils.c (gst_util_seqnum_next, gst_util_seqnum_compare):
New functions.
* gst/gstevent.h:
* gst/gstevent.c (_gst_event_copy, gst_event_new): Initialize new
events with a new sequence number, and copy it when copying.
(gst_event_get_seqnum, gst_event_set_seqnum): Accessors for an
event's sequence number.
* gst/gstmessage.h:
* gst/gstmessage.c (_gst_message_copy, gst_message_new_custom):
(gst_event_get_seqnum, gst_event_set_seqnum): As with events, so
with messages.
* docs/gst/gstreamer-sections.txt: Add new functions to the docs.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full):
Set the last_stop to a more meaningful position when configuring the
segment. ie. the start/stop of the segment or clipped against the
updated segment boundaries.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add some unit tests for the last_stop.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstutils.h:
API: Move float endianness conversion macros from libgstfloatcast
to core as it's useful in general, even in core. Fixes bug #555196.
This adds GDOUBLE_FROM_BE, GDOUBLE_FROM_LE, GDOUBLE_TO_BE,
GDOUBLE_TO_LE, GDOUBLE_SWAP_LE_BE, GFLOAT_FROM_BE, GFLOAT_FROM_LE,
GFLOAT_TO_BE, GFLOAT_TO_LE, GFLOAT_SWAP_LE_BE.
Also add GST_READ_ and GST_WRITE_ macros for floats and doubles:
GST_READ_FLOAT_LE, GST_READ_FLOAT_BE, GST_READ_DOUBLE_LE,
GST_READ_DOUBLE_BE, GST_WRITE_FLOAT_LE, GST_WRITE_FLOAT_BE,
GST_WRITE_DOUBLE_LE, GST_WRITE_DOUBLE_BE.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_configure_src):
When we use gst_pad_alloc_buffer() without wanting to set the caps we
also don't need to check if the caps are compatible because the caller
presumably is going to perform its own custom checks. Fixes some cases
where basetransform elements would error out when it was not needed.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Remove item from the todo list because it was fixed with the latency
state change rewrites.
* docs/design/part-seeking.txt:
* docs/design/part-segments.txt:
Update some docs.
* gst/gstevent.c: (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_new_seek),
(gst_event_parse_seek), (gst_event_new_latency),
(gst_event_parse_latency):
Use quarks to construct and parse events.
* gst/gstquark.c: (_priv_gst_quarks_initialize):
* gst/gstquark.h:
Add some more quarks to the table.
Emit a warning when the quark tables are not in sync.
* tests/check/gst/gstbus.c: (GST_START_TEST):
Add an assert.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_source_finalize),
(gst_bus_add_watch_full_unlocked), (gst_bus_add_watch_full),
(gst_bus_enable_sync_message_emission),
(gst_bus_disable_sync_message_emission),
(gst_bus_add_signal_watch_full), (gst_bus_remove_signal_watch):
Fix deadlock, g_source_get_id() cannot be called in finalize.
Keep track of the watch source by keeping a pointer to the source object
instead.
Use the bus lock to protect access to the pointer to the current
watch source.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbus.c: (gst_bus_source_finalize),
(gst_bus_add_watch_full), (gst_bus_add_signal_watch_full):
Only allow one bus watch to be set at a time. This is necessary
because the dispatcher pops the message from the bus and the second
watcher will then get NULL or the next message (and the first won't
get this next message then, etc). If more than one "watcher" is
required signal watches should be used. Fixes bug #526044.
Original commit message from CVS:
* gst/gstxml.c:
Clarify that the save_thyself() and restore_thyself() virtual
functions of GstObject need to be overriden, not
gst_object_(save|restore)_thyself() which is impossible.
Fixes bug #555700.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_range), (gst_pad_pull_range):
Revert a patch from 21 months ago that broke caps negotiation in pull
mode. Basically, having a buffer pass over a pad will trigger the
setcaps function when caps change, just like in push mode.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.h (GST_GHOST_PAD_CAST):
* gst/gstghostpad.c (GST_GHOST_PAD_CAST): Fix unintended API
removal: re-add GST_GHOST_PAD_CAST to the header.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.h (GstProxyPad, GstProxyPadClass, GstGhostPad)
(GstGhostPadClass): Publically expose these structures so as to
allow easy subclassing from C. Hide the member data behind a
private opaque data pointer.
* gst/gstghostpad.c: Adapt to store instance data in the type
instance's private data region, not in the public struct.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_write_cache):
If we can't get a cache file don't try to save something to it.
Dereferencing NULL pointers usually isn't a good idea.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.c (gst_ghost_pad_construct): If we got a
template via g_object_get(), be sure to unref it.
* gst/gstbuffer.h (GST_BUFFER_FREE_FUNC): Fix incorrect doc.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstutils.h:
Always use the unaligned variants of GST_READ_UINT* and GST_WRITE_UINT*
as it's too easy to break the ISO C strict aliasing rules with simple
casts to the corresponding type and this would introduce hard to debug
bugs. Fixes bug #545714.
API: Add GST_READ_UINT24_(LE|BE) and GST_WRITE_UINT24_(LE|BE).
Original commit message from CVS:
* gst/gstbuffer.h: (GST_BUFFER_FREE_FUNC):
* gst/gstghostpad.c: (gst_ghost_pad_construct):
Add 'Since' bits to gtk-doc chunks for new API.
Original commit message from CVS:
2008-10-06 Andy Wingo <wingo@pobox.com>
* gst/gstbuffer.h (GST_BUFFER_FREE_FUNC): New API, a free function
that will be called on the malloc_data to free it. Basically a way
to avoid subclassing when all you need is a different free
function, i.e. free() instead of g_free().
* gst/gstbuffer.c (gst_buffer_finalize): Free malloc_data via
calling the free function.
(gst_buffer_init): Initialize the free function to g_free.
Original commit message from CVS:
2008-10-06 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.h:
* gst/gstghostpad.c (gst_ghost_pad_construct): New function,
finishes the initialization of ghost pad. Useful for language
bindings and subclassers of GstGhostPad. Fixes#539108.
(gst_ghost_pad_new_full): Use the new constructor.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes#510354.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_structure_change),
(gst_message_parse_structure_change):
* gst/gstmessage.h:
Implement STRUCTURE_CHANGED messages. These messages will be used to
signal the parent bin of link/unlink operations that could require a
resync when doing a state change. See ##510354.
API: gst_message_new_structure_change()
API: gst_message_parse_structure_change()
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked):
Original patch by : Simon Descaries
Fix small refount leak in caps compatibility check.
Fixes#551676.
Original commit message from CVS:
Based on patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gstelement.c: (gst_element_sync_state_with_parent):
Avoid leaking the parent ref when we fail changing the state of the
element using gst_element_sync_state_with_parent(). Fixes#551978.
Original commit message from CVS:
* gst/gstpad.c: (add_unref_pad_to_list),
(gst_pad_get_internal_links_default):
Add fallback when calling the deprecated function on an element that
implements the new internal_link handler.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttaglist.c:
* gst/gsttaglist.h:
Add new tags for geo location and clarify purpose of existing location
tag. Fixes#481169
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* docs/gst/gstreamer-sections.txt:
* win32/common/libgstreamer.def:
* gst/gstpad.c: (gst_pad_init),
(gst_pad_set_iterate_internal_links_function),
(int_link_iter_data_free), (iterate_pad),
(gst_pad_iterate_internal_links_default),
(gst_pad_iterate_internal_links), (gst_pad_get_internal_links):
* gst/gstpad.h:
Add threadsafe replacement functions for getting internal links of an
element. Deprecate the old internal links functions.
API:GstPad::gst_pad_set_iterate_internal_links_function()
API:GstPad::GstPadIterIntLinkFunction
API:GstPad::gst_pad_iterate_internal_links()
API:GstPad::gst_pad_iterate_internal_links_default()
* gst/gstghostpad.c: (gst_proxy_pad_do_iterate_internal_links),
(gst_proxy_pad_init):
Implement threadsafe internal links.
* tests/check/elements/tee.c: (GST_START_TEST), (tee_suite):
Unit test for internal links on tee. See #549504.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_get_compatible_pad):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstpad.c: (name_is_valid), (GST_START_TEST):
Fix all leaks due to the bug in gst_pad_template_new() by which it does
not steal the refcount of the given caps as stated.
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
Original commit message from CVS:
* gst/gstiterator.c:
* gst/gstiterator.h:
After 3 years it's about time to revise the documentation of the
iterator objects.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default):
Make the internal links function less thread-unsafe and add some
comments, dunno why.
Original commit message from CVS:
* gst/gst_private.h:
Include gstinfo.h even if GST_DISABLE_GST_DEBUG is defined. Fixes
build with --disable-gst-debug.
Original commit message from CVS:
* gst/gstpadtemplate.c: Revert last change, since it breaks
a few plugins, ffmpeg, alaw, and mulaw. Code is correct,
but shouldn't be enabled until we've released fixed versions
of -good and -ffmpeg.
Original commit message from CVS:
* gst/gstpadtemplate.c:
The old behaviour was that gst_pad_template_new() takes ownership of
the caps. As we now call g_object_new() which calls g_object_set() and
which copies the caps, we have to unref them to not leak them. Fixes
make valgrid for me.
Original commit message from CVS:
* gst/gstobject.c:
Due to popular request also include ObjectType in
gst_object_get_path_string(). Makes gst-launch -v bit more useful.
Original commit message from CVS:
* gst/gstutils.c: Remove check in gst_pad_query_convert() that
src_val must be positive, because that's not a requirement.
This causes problems with converting negative granulepos
values for Dirac.
* gst/gstquery.c: Same, gst_query_new_convert().
Original commit message from CVS:
* gst/gstutils.c: Remove check in gst_pad_query_convert() that
src_val must be positive, because that's not a requirement.
This causes problems with converting negative granulepos
values for Dirac.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_add_observation):
Add some more debugging to the clock slaving code.
* win32/common/libgstbase.def:
Add new basetransform method.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
Take the (recursive) state lock between getting the locked state of an
element and changing the element state. This allows the application to
lock an element's state and then change its state without races.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
When an element is in the locked state we still want to update the
base_time of the element.
Original commit message from CVS:
patch by: Murray Cumming <murrayc@murrayc.com>
* gst/gstutils.c:
Mention that this is just like gst_buffer_merge() but with extra
unreffing for C coders. Advise language bindings not to wrap it.
Fixes Bug #533856.
Also fix file comment.
Original commit message from CVS:
* gst/gstregistrybinary.c:
Don't use g_mkstmp() on win32, it's unsafe if glib is using a different
libc.
Fixes#544776.
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* gst/gst.c: (init_pre):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_structure_is_subset_field):
Fix subset test.
* tests/check/gst/gstcaps.c: (GST_START_TEST):
Improve unit test subset tests and add a testcase for the subset failure
cases.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Improve subtraction unit test.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/gststructure.c:
(gst_structure_fixate_field_nearest_fraction):
Avoid overflows in fixation code when dealing with MAXINT values, which
v4l2src seems to do.
Fixes#546328.
* tests/check/gst/gststructure.c: (GST_START_TEST):
Make a unit test to check the fix.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_handle_async_done),
(gst_bin_handle_message_func):
Fix race for bins that simulate ASYNC state changes by inserting
ASYNC_START and ASYNC_DONE messages in their bus. We need to check for
pending ASYNC messages even when the bin does not have ASYNC children.
We note detect this behaviour because we will receive an ASYNC message
that is originating from the bin itself.
Fixes races with decodebin2 state changes.
* tests/check/gst/gstbin.c: (GST_START_TEST):
Add some more debug.
Original commit message from CVS:
* gst/gsttaglist.c:
Argh. actually save the text before committing. Now adds
gst_tag_merge_strings_with_comma() to gst_tag_register().
Original commit message from CVS:
* gst/gsttaglist.c:
* gst/gsttaglist.h:
Do as tim pointed out and actually register the new tag. Also improve
te docs and use gst_tag_merge_strings_with_comma() method to allow
retriving all keywords merged in one list.
Original commit message from CVS:
* gst/gstpadtemplate.c:
(gst_pad_template_class_init), (gst_static_pad_template_get),
(gst_pad_template_new), (gst_pad_template_pad_created),
(gst_pad_template_set_property), (gst_pad_template_get_property):
Add "name-template", "direction", "presence" and "caps" properties,
so that gst_pad_template_new() is just a thin wrapper around
g_object_new(), which is better for bindings. (Fixes: #539772)
Original commit message from CVS:
* gst/gsturi.c:
Be more liberal in what URIs we accept.
Do not unescape bits of the URI for no apparent reason before passing to
the element. Fixes#545352.
Original commit message from CVS:
Patch by: Robert Schwebel <r.schwebel@pengutronix.de>
* gst/gst.c:
Include gstconfig.h as macros from it are used. Fixes bug #545607.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/gstreamer.types.in:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_index_func):
* gst/gstconfig.h.in:
* gst/gstelement.c: (gst_element_get_index):
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature),
(gst_registry_binary_read_cache):
* gst/gstregistryxml.c: (load_feature),
(gst_registry_xml_read_cache), (gst_registry_xml_save_feature):
* plugins/Makefile.am:
* tools/gst-indent:
* tools/gst-inspect.c: (print_index_info), (print_element_list),
(print_plugin_features), (print_element_features):
* tools/gst-xmlinspect.c: (print_event_masks),
(print_element_info):
* win32/common/gstconfig.h:
Remove GST_DISABLE_(ENUMTYPES|INDEX|URI) everywhere.
Disabling the indexers and URI handler code will only reduce the
required amount of memory by a very small amount but on the other hand
requires much more maintaince work. Apart from that many places of
code are broken when disabling them.
Disabling the enum types doesn't reduce the required amount of memory
by more than a few bytes and makes it hard to fix bugs like #539772,
i.e. use the enums as GObject properties.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_acceptcaps_default),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full):
Remove silly redundant debug.
Add some more debug info.
Clarify the docs regarding new caps received from pad_alloc.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Only sanity-check the buffer size if requested_caps == buffer_caps
(ie. don't take pad caps into account, they're not relevant here)
Original commit message from CVS:
* configure.ac:
Remove AC_ISC_POSIX macro; it's broken on some platforms and not needed.
Add check (taken from -base) for winsock, adds WIN32_LIBS
* gst/Makefile.am:
Add WIN32_LIBS to LIBADD for libgstreamer. Needed now that gstpoll uses
winsock.
Define GST_EXPORTS when building libgstreamer (only used on win32)
* gst/gst_private.h:
* gst/gstinfo.h:
Use GST_EXPORT instead of locally-defined (and incorrect IMPORT_SYMBOL)
for symbols that we need to export in both these files.
* gst/gstpoll.c:
Include gst_private.h higher up to avoid some compile problems on win32.
Original commit message from CVS:
* gst/gstcaps.c:
Previous commit was wrong NULL caps does not exist
and indicate an error, so also add a FIXME to
gst_caps_is_equal where NULL caps are accepted.
Original commit message from CVS:
* gst/gstplugin.c:
* gst/gstregistry.c:
GstRegistryPool doesn't exist; don't refer to it in docs.
Don't refer to functions that don't exist in docs, it's
unhelpful.
Original commit message from CVS:
* gst/gstchildproxy.c: (gst_child_proxy_base_init):
Add FIXMEs for 0.11 to use GST_TYPE_OBJECT in the signature
of the the child-added / -removed signals as GstChildProxy
only supports GstObjects.
Original commit message from CVS:
* gst/gstplugin.c: (CHECK_PLUGIN_DESC_FIELD), (gst_plugin_load_file):
Print error debug message if plugin description fields that should
be set are NULL.
* gst/gstregistrybinary.c: (gst_registry_binary_save_const_string):
Don't crash if the string to serialise is NULL (it really should
not be, but apparently this used to work with the xml registry ...).
Original commit message from CVS:
* gst/gstevent.c:
Use gst_format_get_name() to improve debug output.
* gst/gstpreset.c:
Remove #ifdef'ed code. Add TODO comment.
* gst/gstsegment.c:
Add debug output to ease spotting format != segment.format assertions.
Original commit message from CVS:
* configure.ac:
* gst/gstpreset.c:
Rename DATADIR to GST_DATADIR to avoid build problems
on win32. Patch By: David Schleef <ds@schleef.org>
Fixes: #536857
Original commit message from CVS:
Patch by: Rob Bradford <rob at robster dot org dot uk>
* gst/gstregistry.c: (gst_registry_scan_path_level):
Don't recurse into .debug directories as some distros install
the debugging symbols next to the plugins in .debug directories
and dlopen() crashes on them sometimes. Fixes bug #508070.
Add FIXME for 0.11 to not recurse into directories at all because
it's very inconsistent to the behaviour of other PATH environment
variables.
Original commit message from CVS:
* gst/gstelement.c:
* gst/gstelement.h:
Deprecated gst_element_get_pad() as it can't be used sanely. It's not
clear of the reference to the resulting pad must be released later
or not, resulting in possible leaks. Fixes bug #533865.
Original commit message from CVS:
Patch by: José Alburquerque <jaalburqu at svn dot gnome dot org>
* gst/gstelementfactory.c:
Small doc fix. Fixes#535285.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_event_default_dispatch):
The default event function on a sinkpad should return TRUE when
there are no internal links but should collect the return values from
the internal links otherwise.
Original commit message from CVS:
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Get all missing elements from a parse launch string if possible
(ie. if the FATAL_ERRORS flag has been specified). Fixes#528178.
Original commit message from CVS:
* gst/gstparse.c: (_gst_parse_escape), (gst_parse_launchv):
* gst/gstutils.c: (gst_parse_bin_from_description):
* gst/parse/grammar.y: (graph):
More guards against bad input; typo fix; some minor clean-ups.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Move size sanity check to the right place: downstream may return
a buffer with a smaller size if the buffer caps are different than
the requested ones, as may happen when doing reverse negotiation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_buffer_alloc_unchecked):
Add sanity check to make sure we don't get smaller buffers
than requested (and fallback to normal buffer alloc if we do).
Original commit message from CVS:
* gst/gstevent.c:
Document that gst_event_new_tag() and gst_event_new_navigation()
take ownership of the taglist/structure passed to them. (#533635).
Original commit message from CVS:
* gst/gstmessage.c: (gst_message_new_error),
(gst_message_new_warning), (gst_message_new_info):
* gst/gstmessage.h:
Mark the debug string parameters as const. Fixes bug #533490.
Original commit message from CVS:
* gst/gstinfo.c:
Explain why we copy the list.
* gst/gstpipeline.c:
Improve docs.
* gst/gstutils.c:
Add one debug-log statement to help tracing probelms with linking pads.
Original commit message from CVS:
* gst/parse/grammar.y:
Remove unneeded value unset.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add unit test for de/serialization of caps.
Original commit message from CVS:
* gst/gstsegment.c:
* tests/check/gst/gstsegment.c:
No, let's not use g_slice_{dup|copy} here, since they only exist
since GLib 2.14 and we still depend only on >= 2.12. Also add
unit test for gst_segment_copy().
Original commit message from CVS:
* gst/gstutils.h: (GST_BOILERPLATE_FULL):
Try to fix 'dereferencing type-punned pointer will break strict
aliasing rules' warnings with C++ compilers and GLib >= 2.14.0: GLib
changed the default GType typedef from gulong to gsize at some point,
but kept GType typedef'ed to gulong for C++ for ABI reasons; the
g_once_* functions all take a gsize * though, so work around the type
mismatch for C++ by doing everything in gsize and casting to GType
later.
Original commit message from CVS:
* gst/gstinfo.h (GST_FUNCTION):
Reverted GST_FUNCTION to the old version as we don't want the
full signature in C++ code. Also added support for MSVC.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon net>
* gst/gstbus.c: (gst_bus_source_dispatch):
Don't print a warning if the queue is empty when we try to pop
here. That could happen if another thread or callback set the
bus to flushing between the source's check/prepare and the
dispatch being called (#531538).
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_set_calibration):
Make some checks actually useful.
* gst/gstregistrybinary.c: (gst_registry_binary_load_plugin):
Remove some unused code. Unsigned integers tend to be >= 0.
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_get_mini_object):
Fix 'Since:' version in gst_value_dup_mini_object() docs blurb: this
function was not in the unscheduled 0.10.19 release.
Original commit message from CVS:
* gst/gstdebugutils.c: (debug_dump_element_pad):
Remove some code that is unused after Stefan's refactoring and uses
uninitialized variables now, resulting in a compiler warning.
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Run g_str_has_suffix() only on the file name, not the
entire file path.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstevent.c: (gst_event_has_name):
* gst/gstevent.h:
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add method to conveniently check the name of a custom event with
gst_event_has_name().
Reformat the event docs so that related methods are put together instead
of the default alphabetical sort.
Update unit test with new method.
API: GstEvent::gst_event_has_name()
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_dispose):
Use the GLib stuff to create a private structure.
Add some locking around some dispose methods to make them a little
safer, see #529723. Patch by: Antoine Tremblay <hexa00 at gmail dot com>
Original commit message from CVS:
* gst/gst.c: (init_post), (gst_deinit):
* tests/check/gst/gstpipeline.c: (GST_START_TEST), (pipeline_thread),
(test_concurrent_create), (gst_pipeline_suite):
Ref some more classes in gst_init() to work around thread-safety
issues in pre-2.16 GLibs, and add basic unit test.
Original commit message from CVS:
patch by: Jason Zhao <e3423c@motorola.com>
* docs/gst/running.xml:
* gst/gst.c:
Enable/disable scan_and_update_registry() based on commandline switch
or environment variable. Fixes#520468.
* ChangeLog:
Fix typo in my previous commit.
Original commit message from CVS:
* gst/gstregistrybinary.c:
Add a warning of we hit unhandled factories when saving.
More debug logging detail, but move to LOG category.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_make):
Unref the factory after it was used the last time, not before.
* gst/gstindexfactory.c: (gst_index_factory_make):
Improve debugging a bit and don't leak a ref to the index factory with
each call.
Original commit message from CVS:
* gst/gstsegment.c:
The glib macro seems to be borked. Use g_slice_copy directly and cast
in the hope that this fixes the warning on 64bit.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Move GParamSepc macros to standart section.
* gst/gstbin.c:
Dn't document _get_type - its in private section in docs anyway and
this doc-blob was incomplete.
* gst/gstclock.h:
Fix wrong symbol names in docs.
* gst/gstmacros.h:
Add once doc sentence.
* tests/check/gst/.cvsignore:
Ignore more.
Original commit message from CVS:
* gst/gsturi.c: (gst_uri_get_protocol):
Fix leak: g_strdown operates on the string in place, while
g_ascii_strdown() returns a newly-allocated string.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_merge_strings_with_comma):
Use g_value_take_string() instead of the deprecated
g_value_set_string_take_ownership().
Original commit message from CVS:
* gst/gstregistrybinary.c: (_gst_crc32):
Return the old CRC instead of 0 if we give a NULL buffer
or a buffer with a length of 0.
Original commit message from CVS:
* gst/gsturi.c: (gst_uri_protocol_check_internal),
(gst_uri_get_protocol), (gst_uri_has_protocol),
(gst_uri_construct), (gst_uri_handler_set_uri):
A valid URI scheme can also include '+', '-' and '.' additional
to alphanumeric characters as per RFC 3986 Section 3.1.
Handle URI schemes case insensitive in all places and convert
to lower-case when constructing an URI or setting an URI with
the GstURIHandler interface. Fixes bug #528868.
All elements can still assume (as before) that they will
get passed URIs with a lower-case URI scheme by the GstURIHandler
interface.
Original commit message from CVS:
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
Don't use g_atomic_set_int where it's not needed.
Original commit message from CVS:
* gst/gstutils.c:
* gst/gstutils.h:
API: Deprecate gst_atomic_int_set(), g_atomic_int_set() should be used
now that we depend on new enough GLib.
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_set_colored),
(gst_debug_set_default_threshold), (_gst_debug_category_new),
(gst_debug_category_set_threshold):
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_set_qos_enabled):
* libs/gst/net/gstnettimeprovider.c:
(gst_net_time_provider_set_property):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* gst/gstregistrybinary.c: (_gst_crc32),
(gst_registry_binary_write),
(gst_registry_binary_initialize_magic),
(gst_registry_binary_write_cache),
(gst_registry_binary_check_magic),
(gst_registry_binary_read_cache):
* gst/gstregistrybinary.h:
Add crc32 checksum to the binary registry file and check this before
accepting a registry file.
Also free the data list when writing to the registry file fails.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature),
(gst_registry_binary_load_plugin):
If an element supports the Uri interface, returns a valid pointer
to the supported URI protocols but this pointer contains nothing
don't try to save that as it will corrupt the registry.
Don't unref the plugin if we added it to the registry already but
fail to load a feature as gst_registry_add_plugin() takes ownership
of the plugin.
Improve debugging a bit.
Original commit message from CVS:
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* gst/gstparamspecs.c:
* gst/gstparamspecs.h:
Add GST_PARAM_CONTROLLABLE and GST_PARAM_USER_SHIFT. Move paramspec
docs to own section.
* gst/gstvalue.c:
This now only documents GValue.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.h:
Remove GST_PARAM_CONTROLLABLE.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_load_feature),
(gst_registry_binary_load_plugin):
Fix a typo in a debug message and revert change from yesterday as
gst_registry_add_plugin() will only fail if something is really wrong
already and we can't survive it anyway.
Original commit message from CVS:
* gst/gst.c: (init_post), (gst_deinit):
Pre-register GstGError GType from a thread-safe context
(fixes#527967); unref enum type classes in deinit.
