gstreamer/subprojects/gst-plugins-bad/sys/d3d11/gstd3d11window_dummy.cpp

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

337 lines
10 KiB
C++
Raw Normal View History

d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
/*
* GStreamer
* Copyright (C) 2020 Seungha Yang <seungha@centricular.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "gstd3d11window_dummy.h"
#include "gstd3d11pluginutils.h"
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
#include <wrl.h>
/* *INDENT-OFF* */
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
using namespace Microsoft::WRL;
/* *INDENT-ON* */
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
GST_DEBUG_CATEGORY_EXTERN (gst_d3d11_window_debug);
#define GST_CAT_DEFAULT gst_d3d11_window_debug
struct _GstD3D11WindowDummy
{
GstD3D11Window parent;
ID3D11Texture2D *fallback_texture;
ID3D11VideoProcessorOutputView *fallback_pov;
ID3D11RenderTargetView *fallback_rtv;
GstD3D11Fence *fence;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
};
#define gst_d3d11_window_dummy_parent_class parent_class
G_DEFINE_TYPE (GstD3D11WindowDummy, gst_d3d11_window_dummy,
GST_TYPE_D3D11_WINDOW);
static void gst_d3d11_window_dummy_on_resize (GstD3D11Window * window,
guint width, guint height);
static GstFlowReturn gst_d3d11_window_dummy_prepare (GstD3D11Window * window,
guint display_width, guint display_height, GstCaps * caps,
GstStructure * config, DXGI_FORMAT display_format, GError ** error);
static void gst_d3d11_window_dummy_unprepare (GstD3D11Window * window);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
static gboolean
gst_d3d11_window_dummy_open_shared_handle (GstD3D11Window * window,
GstD3D11WindowSharedHandleData * data);
static gboolean
gst_d3d11_window_dummy_release_shared_handle (GstD3D11Window * window,
GstD3D11WindowSharedHandleData * data);
static void
gst_d3d11_window_dummy_class_init (GstD3D11WindowDummyClass * klass)
{
GstD3D11WindowClass *window_class = GST_D3D11_WINDOW_CLASS (klass);
window_class->on_resize =
GST_DEBUG_FUNCPTR (gst_d3d11_window_dummy_on_resize);
window_class->prepare = GST_DEBUG_FUNCPTR (gst_d3d11_window_dummy_prepare);
window_class->unprepare =
GST_DEBUG_FUNCPTR (gst_d3d11_window_dummy_unprepare);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
window_class->open_shared_handle =
GST_DEBUG_FUNCPTR (gst_d3d11_window_dummy_open_shared_handle);
window_class->release_shared_handle =
GST_DEBUG_FUNCPTR (gst_d3d11_window_dummy_release_shared_handle);
}
static void
gst_d3d11_window_dummy_init (GstD3D11WindowDummy * self)
{
}
static GstFlowReturn
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
gst_d3d11_window_dummy_prepare (GstD3D11Window * window,
guint display_width, guint display_height, GstCaps * caps,
GstStructure * config, DXGI_FORMAT display_format, GError ** error)
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
{
gst_clear_object (&window->compositor);
gst_clear_object (&window->converter);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
/* We are supporting only RGBA, BGRA or RGB10A2_LE formats but we don't know
* which format texture will be used at this moment */
gst_video_info_from_caps (&window->info, caps);
window->render_rect.left = 0;
window->render_rect.top = 0;
window->render_rect.right = display_width;
window->render_rect.bottom = display_height;
window->input_rect.left = 0;
window->input_rect.top = 0;
window->input_rect.right = GST_VIDEO_INFO_WIDTH (&window->info);
window->input_rect.bottom = GST_VIDEO_INFO_HEIGHT (&window->info);
gst_video_info_set_format (&window->render_info,
GST_VIDEO_FORMAT_BGRA, display_width, display_height);
/* TODO: not sure which colorspace should be used, let's use BT709 since
* it's default and most common one */
window->render_info.colorimetry.primaries = GST_VIDEO_COLOR_PRIMARIES_BT709;
window->render_info.colorimetry.transfer = GST_VIDEO_TRANSFER_BT709;
window->render_info.colorimetry.range = GST_VIDEO_COLOR_RANGE_0_255;
if (config) {
gst_structure_set (config, GST_D3D11_CONVERTER_OPT_BACKEND,
GST_TYPE_D3D11_CONVERTER_BACKEND, GST_D3D11_CONVERTER_BACKEND_SHADER,
nullptr);
} else {
config = gst_structure_new ("converter-config",
GST_D3D11_CONVERTER_OPT_BACKEND, GST_TYPE_D3D11_CONVERTER_BACKEND,
GST_D3D11_CONVERTER_BACKEND_SHADER, nullptr);
}
GstD3D11DeviceLockGuard lk (window->device);
window->converter = gst_d3d11_converter_new (window->device, &window->info,
&window->render_info, config);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
if (!window->converter) {
GST_ERROR_OBJECT (window, "Cannot create converter");
g_set_error (error, GST_RESOURCE_ERROR, GST_RESOURCE_ERROR_FAILED,
"Cannot create converter");
return GST_FLOW_ERROR;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
}
window->compositor =
gst_d3d11_overlay_compositor_new (window->device, &window->render_info);
if (!window->compositor) {
GST_ERROR_OBJECT (window, "Cannot create overlay compositor");
g_set_error (error, GST_RESOURCE_ERROR, GST_RESOURCE_ERROR_FAILED,
"Cannot create overlay compositor");
return GST_FLOW_ERROR;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
}
return GST_FLOW_OK;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
}
static void
gst_d3d11_window_dummy_unprepare (GstD3D11Window * window)
{
GstD3D11WindowDummy *self = GST_D3D11_WINDOW_DUMMY (window);
gst_clear_d3d11_fence (&self->fence);
}
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
static void
gst_d3d11_window_dummy_on_resize (GstD3D11Window * window,
guint width, guint height)
{
GstVideoRectangle src_rect, dst_rect, rst_rect;
dst_rect.x = 0;
dst_rect.y = 0;
dst_rect.w = width;
dst_rect.h = height;
if (window->force_aspect_ratio) {
src_rect.x = 0;
src_rect.y = 0;
src_rect.w = GST_VIDEO_INFO_WIDTH (&window->render_info);
src_rect.h = GST_VIDEO_INFO_HEIGHT (&window->render_info);
switch (window->method) {
case GST_VIDEO_ORIENTATION_90R:
case GST_VIDEO_ORIENTATION_90L:
case GST_VIDEO_ORIENTATION_UL_LR:
case GST_VIDEO_ORIENTATION_UR_LL:
src_rect.w = GST_VIDEO_INFO_HEIGHT (&window->render_info);
src_rect.h = GST_VIDEO_INFO_WIDTH (&window->render_info);
break;
default:
src_rect.w = GST_VIDEO_INFO_WIDTH (&window->render_info);
src_rect.h = GST_VIDEO_INFO_HEIGHT (&window->render_info);
break;
}
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
gst_video_sink_center_rect (src_rect, dst_rect, &rst_rect, TRUE);
} else {
rst_rect = dst_rect;
}
window->render_rect.left = rst_rect.x;
window->render_rect.top = rst_rect.y;
window->render_rect.right = rst_rect.x + rst_rect.w;
window->render_rect.bottom = rst_rect.y + rst_rect.h;
window->first_present = TRUE;
}
static gboolean
gst_d3d11_window_dummy_open_shared_handle (GstD3D11Window * window,
GstD3D11WindowSharedHandleData * data)
{
GstD3D11Device *device = window->device;
ID3D11Device *device_handle;
HRESULT hr;
ComPtr < ID3D11Texture2D > texture;
ComPtr < IDXGIKeyedMutex > keyed_mutex;
ID3D11RenderTargetView *rtv;
GstMemory *mem;
GstD3D11Memory *dmem;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
D3D11_TEXTURE2D_DESC desc;
gboolean use_keyed_mutex = FALSE;
device_handle = gst_d3d11_device_get_device_handle (device);
if ((data->texture_misc_flags & D3D11_RESOURCE_MISC_SHARED_NTHANDLE) ==
D3D11_RESOURCE_MISC_SHARED_NTHANDLE) {
ComPtr < ID3D11Device1 > device1_handle;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
hr = device_handle->QueryInterface (IID_PPV_ARGS (&device1_handle));
if (!gst_d3d11_result (hr, device))
return FALSE;
hr = device1_handle->OpenSharedResource1 (data->shared_handle,
IID_PPV_ARGS (&texture));
} else {
hr = device_handle->OpenSharedResource (data->shared_handle,
IID_PPV_ARGS (&texture));
}
if (!gst_d3d11_result (hr, device))
return FALSE;
texture->GetDesc (&desc);
use_keyed_mutex = (desc.MiscFlags & D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX) ==
D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX;
if (use_keyed_mutex) {
hr = texture->QueryInterface (IID_PPV_ARGS (&keyed_mutex));
if (!gst_d3d11_result (hr, device)) {
GST_ERROR_OBJECT (window, "Keyed mutex is unavailable");
return FALSE;
}
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
}
mem = gst_d3d11_allocator_alloc_wrapped (nullptr,
device, texture.Get (), desc.Width * desc.Height * 4, nullptr, nullptr);
if (!mem) {
GST_ERROR_OBJECT (window, "Couldn't allocate memory");
return FALSE;
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
}
dmem = GST_D3D11_MEMORY_CAST (mem);
rtv = gst_d3d11_memory_get_render_target_view (dmem, 0);
if (!rtv) {
GST_ERROR_OBJECT (window, "Render target view is unavailable");
gst_memory_unref (mem);
return FALSE;
}
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
if (keyed_mutex) {
hr = keyed_mutex->AcquireSync (data->acquire_key, INFINITE);
if (!gst_d3d11_result (hr, device)) {
GST_ERROR_OBJECT (window, "Couldn't acquire sync");
gst_memory_unref (mem);
return FALSE;
}
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
}
/* Everything is prepared now */
gst_d3d11_window_dummy_on_resize (window, desc.Width, desc.Height);
/* Move owned resources */
data->render_target = gst_buffer_new ();
gst_buffer_append_memory (data->render_target, mem);
if (keyed_mutex)
data->keyed_mutex = keyed_mutex.Detach ();
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
return TRUE;
}
static gboolean
gst_d3d11_window_dummy_release_shared_handle (GstD3D11Window * window,
GstD3D11WindowSharedHandleData * data)
{
GstD3D11WindowDummy *self = GST_D3D11_WINDOW_DUMMY (window);
GstD3D11Device *device = window->device;
HRESULT hr;
/* TODO: cache owned resource for the later reuse? */
if (data->keyed_mutex) {
hr = data->keyed_mutex->ReleaseSync (data->release_key);
gst_d3d11_result (hr, device);
GST_D3D11_CLEAR_COM (data->keyed_mutex);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
} else {
/* If keyed mutex is not used, let's handle sync manually by using
* fence. Issued GPU commands might not be finished yet */
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
if (!self->fence)
self->fence = gst_d3d11_device_create_fence (device);
if (!self->fence) {
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
GST_ERROR_OBJECT (self, "Couldn't Create event query");
return FALSE;
}
if (!gst_d3d11_fence_signal (self->fence) ||
!gst_d3d11_fence_wait (self->fence)) {
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
GST_ERROR_OBJECT (self, "Couldn't sync GPU operation");
return FALSE;
}
}
gst_clear_buffer (&data->render_target);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
return TRUE;
}
GstD3D11Window *
gst_d3d11_window_dummy_new (GstD3D11Device * device)
{
GstD3D11Window *window;
g_return_val_if_fail (GST_IS_D3D11_DEVICE (device), NULL);
window = (GstD3D11Window *)
g_object_new (GST_TYPE_D3D11_WINDOW_DUMMY, "d3d11device", device, NULL);
window->initialized = TRUE;
gst_object_ref_sink (window);
d3d11videosink: Add support for drawing on application's own texture Add a way to support drawing on application's texture instead of usual window handle. To make use of this new feature, application should follow below step. 1) Enable this feature by using "draw-on-shared-texture" property 2) Watch "begin-draw" signal 3) On "begin-draw" signal handler, application can request drawing by using "draw" signal action. Note that "draw" signal action should be happen before "begin-draw" signal handler is returned NOTE 1) For texture sharing, creating a texture with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend if possible because we cannot ensure sync a texture which was created with D3D11_RESOURCE_MISC_SHARED and it would cause glitch with ID3D11VideoProcessor use case. NOTE 2) Direct9Ex doesn't support texture sharing which was created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words, D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop. NOTE 3) Because of missing synchronization around ID3D11VideoProcessor, If shared texture was created with D3D11_RESOURCE_MISC_SHARED, d3d11videosink might use fallback texture to convert DXVA texture to normal Direct3D texture. Then converted texture will be copied to user-provided shared texture. * Why not use generic appsink approach? In order for application to be able to store video data which was produced by GStreamer in application's own texture, there would be two possible approaches, one is copying our texture into application's own texture, and the other is drawing on application's own texture directly. The former (appsink way) cannot be a zero-copy by nature. In order to support zero-copy processing, we need to draw on application's own texture directly. For example, assume that application wants RGBA texture. Then we can imagine following case. "d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink" ^ |_ allocate new Direct3D texture for RGBA format In above case, d3d11convert will allocate new texture(s) for RGBA format and then application will copy again the our RGBA texutre into application's own texture. One texture allocation plus per frame GPU copy will hanppen in that case therefore. Moreover, in order for application to be able to access our texture, we need to allocate texture with additional flags for application's Direct3D11 device to be able to read texture data. That would be another implementation burden on our side But with this MR, we can configure pipeline in this way "d3d11h264dec ! d3d11videosink". In that way, we can save at least one texture allocation and per frame texutre copy since d3d11videosink will convert incoming texture into application's texture format directly without copy. * What if we expose texture without conversion and application does conversion by itself? As mentioned above, for application to be able to access our texture from application's Direct3D11 device, we need to allocate texture in a special form. But in some case, that might not be possible. Also, if a texture belongs to decoder DPB, exposing such texture to application is unsafe and usual Direct3D11 shader cannot handle such texture. To convert format, ID3D11VideoProcessor API needs to be used but that would be a implementation burden for application. Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
2020-12-23 14:49:12 +00:00
return window;
}