Some servers might not provide 100% matching PDT when doing updates, or accross
variants. This would cause the code matching segments using PDT to fail if the
segment PDT was 1 microsecond (or whatever small value) before the candidate
segment. And would pick the (wrong) following segment as the matching one.
In order to be more tolerant when matching, we instead check whether the
candidate segment is within the first segment of the segment we are trying to
match.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
If we end up with a segment with an internal time that varies from the supposed
one, this could be for two reasons:
* We guess-timated the wrong segment to go to when advancing or switching
variants. In that case we try to find the actual segment to go to (just before
this change).
* There was a complete playlist change (for whatever reason) and we can't find a
replacement. In that case we want to carry on playback from this position but
need to remember that we moved (by setting the stream to DISCONT, and
resetting the new mapping).
Fixes playback on several broken stream
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
Since the default value of `m3u8->discont_sequence` (before parsing of the
playlist data) was 0 .. we would never properly detect the presence of that
field if it was present with a value of 0.
This would later on cause havoc in playlist synchronization where we would
assume it didn't have a discontinuity sequence specified (whereas it did, and it
was 0).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
A lot of streams will do a poor job of estimating proper duration of fragments
in the playlist, but over several fragments have it correct.
Instead of constantly trying to realign the estimated stream time, allow for a
more realistic tolerance of 3-4 video frames
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
When updating playlists, we want to know whether the updated playlist is
continuous with the previous one. That is : if we advance, will the next
fragment need to have the DISCONT buffer set on it or not.
If that happens (because we switched variants, or the playlist all of a sudden
changed) we remember that there is a pending discont for the next fragment. That
will be used and resetted the next time we get the fragment information.
Previously this was only partially done. And it was racy because it was set
directly on `GstAdaptiveDemux2Stream->discont` when a playlist was updated,
instead of when the next fragment was prepared.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
When dealing with live streams, the function was assuming that all segments of
the playlist had valid stream_time. But that isn't TRUE, for example in the case
of failing to synchronize playlists.
Fixes losing sync due to not being able to match playlist on updates
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
Even if no new synchronization information is available.
This is necessary because the timestamp offset logic in rtpbin depends
on the base RTP time that is determined by the jitterbuffer, but this
changes all the time (especially in mode=slave) and the timestamp
offsets have to be updated accordingly. Doing so is especially important
if they're only determined by the RTP-Info, which never changes from the
very beginning.
The interval can be configured via the new min-sync-interval property.
Synchronization happens at least that often, but at most as often as the
old sync-interval property allows.
Both intervals are now based on the monotonic system clock.
Additionally, clean up synchronization code a bit, only emit either
inband NTP or RTCP SR synchronization at the same time, based on which
one has the more recent time information, and only emit RTP-Info
synchronization if it wasn't provided previously at the same time as the
NTP-based synchronization information.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
There is generally no requirement to ignore RTCP SR if the RTP time of
the SR differs a lot from the last received RTP packet. The mapping
between RTP and NTP time stays valid until there was a stream reset, in
which case we wouldn't use that information anyway.
When using rtcp-sync-send-time=false the default of 1s difference can
easily be exceeded, e.g. if encoding of the stream after capture adds
more than 1s of latency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Never is useful for some RTSP servers that report plain garbage both via
RTCP SR and RTP-Info, for example.
NTP is useful if synchronization should only ever happen based on RTCP
SR or NTP-64 RTP header extension.
Also slightly change the behaviour of always/initial to take RTP-Info
based synchronization into account too. It's supposed to give the same
values as the RTCP SR and is available earlier, so will generally cause
fewer synchronization glitches if it's made use of.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Instead of switching on the very first stream, require that all streams
have switched before switching to the different synchronization
mechanism.
Without this there will be a noticeable gap during the switch. E.g. when
going from RTP-Info to NTP-based association, first the first stream
only would get an offset, then the first two, ... then all of them.
Depending on the order of streams this will cause a lot of changes in
ts-offset during the transition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Previously these parameters were randomly changed in the body of the
function to avoid having to declare a new variable, which made the code
very hard to follow. By marking them as const this won't be possible
anymore in the future.
Also the RTP clock-base (RTP time from RTSP RTP-Info) is an unsigned
64 bit integer as it's an extended RTP timestamp.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Both were entangled previously and very hard to follow what happens
under which conditions. Now as a very first step the code decides which
of the two cases it is going to apply, and then proceeds accordingly.
This also avoids calculating completely invalid values along the way and
even printing them int the debug output.
Also improve debug output in various places.
This shouldn't cause any behaviour changes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
This simplifies the code as it's a much simpler case than the normal
inter-stream synchronization, and interleaving it with that only
reduces readability of the code.
Also improve some debug output in this code path.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Adds a separate vtenc_h265a element (with a _hw variant as usual) for the HEVCWithAlpha codec type.
Decided to go with a separate element to not break existing uses of the normal HEVC encoder.
The preserve_alpha property is still only used for ProRes, no need for it here because we explicitly say we want alpha
when using the new element.
For now, the HEVCWithAlpha has an issue where it does not throttle the amount of input frames queued internally.
I added a quick workaround where encode_frame() will block until enqueue_frame() callback notifies it that some space
has been freed up in the internal queue. The limit was set to 5, which should be enough I guess? Hopefully this is not
too prone to race conditions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6664>
When we are dealing with parsed inputs (i.e. using identity), we need to ensure
that we have a valid stream collection (and therefore DBCollection) before
anything flows dowsntream.
In those cases, we hold onto those events until we get such a collection.
Fixes#3356
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
This commit separates collection and selections into a new separate structure:
DecodebinCollection.
This provides a much cleaner/saner way of dealing with collections being
updated, gapless playback, etc...
There is now a list of DecodebinCollection in flight, of which two are special:
* input_collection, the currently inputted/merged collection
* output_collection, the currently active collection on the output of multiqueue
Handling GST_EVENT_SELECT_STREAMS is split, by looking for the collection to
which it applies. And the requested streams are stored in it. IIF that
collection is output_collection we can do the switch, else it will be updated
when it becomes active.
Detecting which collection/selection is active is done by looking at the
GST_EVENT_STREAM_START on the output of the multiqueue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
* Move the handling of GST_EVENT_STREAM_START on a slot to a separate function
* There was a lot of usage of `gst_stream_get_stream_id()` for the slot
active_stream. Cache that instead of constantly querying it.
* Rename the variables in `handle_stream_switch()` to be clearer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
* Centralize associating an output to a slot in one function, including properly
resetting those fields
* Rename functions to be more explicit
* Move code to "reset" an output stream into a dedicated function (will be used
later)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
* Rename the function names to be clearer, with prefixes
* Pass the input (or stream) directly where appropriate
* Document usage, inputs, ownership
* Rename variables for clarity where applicable
* Avoid double lock/unlock if callee can handle it directly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
Simplify its usage by having it directly create the message if the collection
changed. This is what caller were always doing and avoids releasing selection
locks yet-another-time
Also use it in more places to avoid code repetition
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
`StdVideoDecodeH265PictureInfo.flags.IsReference` refers to section 3.132 ITU-T
H.265 specification:
reference picture: A picture that is a short-term reference picture or a
long-term reference picture.
`GstH265Picture.ref` doesn't reflect this, but we need to query the NAL type of
the processed slice.
This patch fixes the validation layer error
`VUID-vkCmdBeginVideoCodingKHR-slotIndex-07239` while using the NVIDIA driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6901>
Conceptually identical to the present signal of d3d11videosink.
This signal will be emitted with current render target
(i.e., swapchain backbuffer) and command queue. Signal handler
can record GPU commands for an overlay image or to blend
an image to the render target.
In addition to d3d12 resources, videosink will send
d3d11 and d2d resources depending on "overlay-mode"
property, so that signal handler can render by using
preferred/required DirectX API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6838>
The idea of using separate command queue per videosink was that
swapchain is bound to a command queue and we need to flush the
command queue when window size is changed. But the separate
queue does not seem to improve performance a lot.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6838>
On various 32 bit systems, time_t is actually 64 bits while long is
still only 32 bits. The macro would wrongly trigger its assertion in
this case if a value with more than 68 years worth of seconds is
converted.
Examples are various newer 32 bit platforms and old ones that are
compiled with -D_TIME_BITS=64.
Also statically assert that time_t is either 32 or 64 bits. Other values
might need adjustments in the macro.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6869>
The prime_fds for multi planes may be the same. For example, on Intel's
platform, the NV12 surface may have the same FD for the plane0 and the
plane1. Then, the DRM_IOCTL_GEM_CLOSE will close the same handle twice
and get an "Invalid argument 22" error the second time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6914>
From the spec (chapter 34, v1.3.283):
````
UNORM: the components are unsigned normalized values in the range [0, 1]
SRGB: the R, G and B components are unsigned normalized value that represent
values using sRGB nonlinear encoding, while the A component (if one
exists) is a regular unsigned normalized value
```
The difference is the storage encoding, the first one is aimed for image
transfers, while the second is for shaders, mostly in the swapchain stage in the
pipeline, and it's done automatically if needed [1].
As far as I have checked, other frameworks (FFmpeg, GTK+), when import or export
images from/to Vulkan, use exclusively UNORM formats, while SRGB formats are
ignored.
My conclusion is that Vulkan formats are related on how bits are stored in
memory rather their transfer functions (colorimetry).
This patch does two interrelated changes:
1. It swaps certain color format maps to try first, in both
gst_vulkan_format_from_video_info() and gst_vulkan_format_from_video_info_2(),
the UNORM formats, when comparing its usage, and later check for SRGB.
2. It removes the code that check for colorimetry in
gst_vulkan_format_from_video_info_2(), since it not storage related.
1. https://community.khronos.org/t/noob-difference-between-unorm-and-srgb/106132/7
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6797>
This mirrors the behaviour in vp8enc / vp9enc and is generally more
useful than using any framerate from the caps as it provides some degree
of accuracy if the stream doesn't have timestamps perfectly according to
the framerate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6891>
Turns out AudioConvertHostTimeToNanos and AudioGetCurrentHostTime are macOS-only APIs, which prevents apps using
GStreamer on iOS from being accepted into App Store.
This commit replaces those functions with a manual version of what they do - mach_absolute_time() for the current time,
and data from mach_timebase_info() at the beginning to convert host timestamps to nanoseconds.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6789>
The `videosink` refernce in main() is a floating one, so it should not
be unref'ed (the playbin practically takes ownership of it).
This prevents a "gst_object_unref: assertion '((GObject *)
object)->ref_count > 0' failed" at runtime.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6883>
Using g_error() crashes the application, producing a coredump e.g. when
the user closes the video window, which can be confusing (especially on
the very first tutorial).
Let's change this to log the error message without crashing, using
g_printerr(), like subsequent tutorials.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6883>
To simplify the description, I'm assuming we only have two streams: video and audio.
For the video stream, we have the following events :
- STREAM_START => stream->wait set to true
- NEW_SEGMENT(1) => blocked waiting in gst_stream_synchronizer_wait
- FLUSH_START => unblocked
- FLUSH_STOP => stream->wait reset to false
- NEW_SEGMENT(2) => not waiting, since stream->wait is false
Then for the audio stream, we have the following events :
- STREAM_START => stream->wait set to true
- NEW_SEGMENT(2) => blocked waiting in gst_stream_synchronizer_wait for ever.
Note: The first NEW_SEGMENT event and the FLUSH_START, FLUSH_STOP events of the audio stream
are dropped before being received by the streamsynchronizer element, because the decodebin audio pad src
is not yet linked to the playsink audio pad sink.
To fix this deadlock, we don't reset stream->wait to false in the FLUSH_STOP event when it is not
waiting for the EOS of the other streams.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6763>
If we have constant duration buffers, set the duration on
outgoing buffers, like rtpmp4adepay does. This fixes
problems with (for example) muxers like mp4mux not writing
the duration of the final sample into the index.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6878>
_get_osfhandle() expects valid fd and CRT will abort program
if given paramerter is invalid. The fd can be invalidated
in various way, file was deleted by other process after
we open a file. To avoid it, our own exception
handler must be installed so that _get_osfhandle() can return
INVALID_HANDLE_VALUE if fd is invalid.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6877>
In some cases you want to ensure that a specific element factory is used
while requiring some specific caps but this was not possible. You can
now do `qtmux:video/x-prores,variant=standard|factory-name=avenc_prores_ks`
to ensure that the `avenc_prores_ks` factory is used to produce the
'standard' variant of prores video stream.
This also enhances a bit the documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6875>
The encoder can specify the a preferred_output_delay value to get better throughput
performance. The higher delay may get better HW performance, but it may increases
the encoder and pipeline latency.
When the output queue length is smaller than preferred_output_delay, the encoder
will not block to waiting for the encoding output. It will continue to prepare and
send more commands to GPU, which may improve the encoder throughput performance.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4359>
This counter is incremented once for every segment, meaning it would
e.g. overflow after 24 days when using 1ms segments. Once that happens,
completely wrong positions are reported and invalid memory is handed out
for writing/reading the next segments.
As the affected variables are unfortunately part of the public API of
the struct, a second set of variables is added together with accessor
functions and both variables are kept in sync for backwards
compatibility.
All existing users of the two variables are moved to the new ones but
external code might still run into the overflow.
This also slightly breaks API as external code updating the variables
will have no effect anymore but the only known user of this is
pulsesink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6740>
If the muxer times out because of the latency deadline it can happen
that some pads have no caps yet. In that case skip creation of streams
for these pads and create updated section tables once the first buffer
arrives later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6823>
This makes sure that for sparse streams (KLV, DVB subtitles, ...) the
muxer does not wait until the next buffer is available for them but
times out on the latency deadline and outputs data.
For non-live pipelines it will still be necessary for upstream to
correctly produce gap events for sparse streams.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6823>
* gst_ffmpegviddec_frame() is the only caller of gst_ffmpegviddec_video_frame()
and has the same signature. Just move the checks into a single function and
use that.
* Make it clear which frames are the input and output ones in
gst_ffmpegviddec_video_frame() to make issues like the one fixed in the previous
commit more obvious.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6851>
The FORCE_KEYFRAME frame which has GST_VIDEO_CODEC_FRAME_FLAG_FORCE_KEYFRAME
bit set should be the sync point. So we should let it be an IDR frame to begin
a new GOP, rather than just promote it to an I frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6619>
The FORCE_KEYFRAME frame which has GST_VIDEO_CODEC_FRAME_FLAG_FORCE_KEYFRAME
bit set should be the sync point. So we should let it be an IDR frame to begin
a new GOP, rather than just promote it to an I frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6619>
__STDC_NO_ATOMICS doesn't seem to exist. In fact the only compiler
I've found that sets any of those is msvc, but it sets
__STDC_NO_ATOMICS__, not __STDC_NO_ATOMICS.
__STDC_NO_ATOMICS__ is the one documented by C11 standard.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6848>
This fixes the code regarding dropping "ghost frames", that is to say input
frames which ended up not producing any decoded frame.
The iteration itself makes sense.. but it was stopping at the "input" frame and
not the decoded frame we just got back.
When dealing with I-frame codecs, ffmpeg will decode frames in separate frames,
so there is no guarantee that they are decoding in order.
Fixes playback issues with such codecs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6842>
Set the P and B frame qp to I frame value to avoid generating delta
QP between different frame types. For ICQ and QVBR modes, we can
only set the qpi value, so the qpp and qpb values should be set to
the same value as the qpi.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6841>
Address below message reported by SDK debug layer.
ID3D12Device::CheckFeatureSupport: Unsupported Decode Profile Specified.
Use ID3D12VideoDevice::CheckFeatureSupport with D3D12_FEATURE_VIDEO_DECODE_PROFILES
to retrieve a list of supported profiles
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6839>
There's nothing requiring <= 64 channels except for getting the reorder
map and creating a channel mixing matrix, but those won't be possible to
call anyway as channel positions can only express up to 64 channels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6819>
Certain V4L2 fourccs don't (yet) have DRM counter parts, in which case
we can't create DMA_DRM caps for them. This is usually the case for
specific tilings, which are represented as modifiers for DMA formats.
While using these tilings is generally preferable - because of e.g.
lower memory usage - it can result in additional conversion steps when
interacting with DMA based APIs such as GL, Vulkan or KMS. In such cases
using a DMA compatible format usually ends up being the better option.
Before the addition of DMA_DRM caps, this was what playbin3 ended up
requesting in various cases - e.g. prefering NV12 over NV12_4L4 - but
the addition of DMA_DRM caps seems to confuse the selection logic.
As a simple and quite robust solution, assume that peers supporting
DMA_DRM caps always prefer these and reorder the caps accordingly.
In the future we plan to have a translation layer for cases where
there is a matching fourcc+modifier pair for a V4L2 fourcc, ensuring
optimal results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6645>
Doing it in gst_play_new() means that bindings that directly call
g_object_new() with the GType wouldn't end up initializing both.
This affects at least the Python and GJS bindings.
gst_init() is nonetheless only called from gst_play_new() once because
calling it from class_init would likely lead to problems as that's
called from somewhere in the middle of GObject.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6801>
Don't add an extra ref if non-floating as that ref will never be
unreffed.
gst_bin_add() is transfer floating (alias to transfer none).
Fixes a leak when a non-floating ref was provided as a return value in
the request-aux-sender signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6807>
Use of VK_PIPELINE_STAGE_2_ALL_COMMANDS_BIT instead of
specific VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR
Fix for VUID-vkCmdPipelineBarrier2-srcStageMask-03849
pDependencyInfo->pImageMemoryBarriers[0].srcStageMask
(VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR) is not compatible with
the queue family properties
(VK_QUEUE_GRAPHICS_BIT|VK_QUEUE_COMPUTE_BIT|VK_QUEUE_TRANSFER_BIT|
VK_QUEUE_SPARSE_BINDING_BIT|VK_QUEUE_PROTECTED_BIT) of this
command buffer. The Vulkan spec states: The srcStageMask member
of any element of the pMemoryBarriers, pBufferMemoryBarriers, or
pImageMemoryBarriers members of pDependencyInfo must only
include pipeline stages valid for the queue family that was
used to create the command pool that commandBuffer was allocated
from (
https://www.khronos.org/registry/vulkan/specs/1.3-extensions/
html/vkspec.html#VUID-vkCmdPipelineBarrier2-srcStageMask-03849)
The frame barrier should use a compatible srcStageMask for all
the queues.
Remove reset_pipeline_stage_mask as it is redundant
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6780>
Add pitch tests with different forward and backward playback rates.
Those tests depend on the libSoundTouch version to validate the buffers
checksums. The actual version uses libSoundTouch 2.3.2, use the
`--force-fallback-for=soundtouch` meson option to build using the same
version.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- fully protect accesses to the libsoundtouch API that is not
thread-safe.
- fully protect accesses to GstPitch members that could be read by a
downstream query thread while written by an upstream streaming thread
or a user thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- use the `GST_PITCH_GET_PRIVATE` accessor when needed
- rename `out_seg_rate` to `output_rate` to use the same name as the parameter
- rename `seg_arate` to `segment_applied_rate` to improve readability
- apply gst-indent to gstpitch.hh/cc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
When changing playing rate, the output segment was not correctly
calculated because the stream time ratio was computed using the previous
input segment rate instead of using the actual rate. This was producing
wrong results for the output segment start and end values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
The h26xdecoder 'stop' method was not called
as the vulkan h26x class rewires the video decoder
'stop' base method to its own one.
It was causing some memory leaks such as dangling parser
and dpb in h26xdecoder base class.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6782>
Modifying the `avoid-reencoding` property of `encodebin` could potentially cause
it to reconfigure itself, in which case the source pad will be removed and then
re-added.
Therefore set that property *before* attempting to link to that pad.
Fixes smart-render
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6757>
when pipline is
glvideomixerelement->glcolorconvertelement->gldownloadelement and
glcolorconvertelement is not passthrough, the gl bufferpool between
glvideomixerelement and glcolorconvertelement will not add gl sync meta
during allocating buffer. This will cause that glcolorconvert's inbuf
has no sync meta to wait for.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6756>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
Fixing deadlock in below case
* GC lock is taken by background thread, and the background thread calls
gst_d3d12_ipc_client_release_imported_data() which takes ipc lock
* ipc lock is already taken in ipc thread and trying to pushing GC data
via gst_d3d12_command_queue_set_notify()
* gst_d3d12_command_queue_set_notify() is trying to take GC lock
but it's already taken by background thread
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Ideally, GPU waiting should be scheduled just before executing command list.
But handling the case outside of converter is a bit complicated.
Under an assumption that constructed command list will be executed
immediately, schedules GPU-side waiting inside of conversion method
to simplify the flow.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Neither LIBDIR nor LIBPL are set with the native windows Python
(unlike MSYS2), so we need to use `prefix` which takes us to the
rootdir of the Python installation.
The name is also different: it's python312.dll, not python3.12.dll.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6734>
`python.get_variable('FOO', [])` becomes `python.get_variable('FOO')`
due to how Meson treats empty arrays in arguments, which breaks the
fallback feature of get_variable().
So we need to actually check whether the variable exists before trying
to fetch it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6734>
Since we don't want to expose video decoding API outside of GStreamer, the
header is removed from installation and both source files are renamed as
-private.
The header must remain in gst-libs because is referred by GstVulkanQueue,
which's the decoder factory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6723>
First it derived mapping was disabled for P010 formats, but also there's an
issue with interlaced frames.
It would be possible to disable derived mapping only for interlaced (H.264
decoder and vadeinterlace) but it would spread the hacks along the code. It's
simpler and contained to disable derived completely for Mesa <23.3
Fixes: #3450
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6729>
Instead of duplicating the GStreamer format to DRM fourcc mapping, this patch
uses the GstVideo library helpers. This duplicates the big O of looking for,
since the two lists are traversed, but it's less error prone.
Partially reverts commit 547f3e8622.
Fixes: #3354
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6731>
The assertion that was present before is a bit too harsh, since there is now
a (understandable) use-case where this could happen.
In gapless use-case, with two files containing the same type (ex:audio). The
first one *does* expose a collection with an audio stream, but decoding
fails (for whatever reason).
That would cause us to have configured a audio combiner, which was never
used (i.e. not active).
Then the second file plays and we (wrongly) assume it should be activated
... whereas the combiner was indeed present.
Demote the assertion to a warning and properly handle it
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3389
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6737>
If waylandsink received buffer rate is high which causes frame
drop, the cached staged buffer will be replaced when next buffer
needs to be rendered and be freed after redraw. But there is
chance to get memory leak if ended without redraw. So need to
free staged buffer when do gst_wl_window_finalize().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6670>
`rsvg_handle_get_dimensions()` and `rsvg_handle_render_cairo()` are
deprecated, and the replacement librsvg functions as specified in the
migration guide are `rsvg_handle_get_intrinsic_size_in_pixels()` and
`rsvg_handle_render_document()`.
However, those are not drop-in replacements, and actually have
breaking semantics for our use-case:
1. `intrinsic_size_in_pixels()` requires SVGs to have width+height or
the viewBox attribute, but `get_dimensions()` does not. It will
calculate the geometry based on element extents recursively.
2. `render_cairo()` simply renders the SVG at its intrinsic size on
the specified surface starting at the top-left, maintaining
whatever transformations have been applied to the cairo surface,
including distorted aspect ratio.
However, `render_document()` does not do that, it is specifically
for rendering at the specified aspect ratio inside the specified
viewport, and if you specify a viewPort that does not match the
aspect ratio of the SVG, librsvg will center it.
Matching the old behaviour with the new APIs is a lot of work for no
benefit. We'd be duplicating code that is already there in librsvg in
one case and undoing work that librsvg is doing in the other case.
The aspect ratio handling in this element is also kinda atrocious.
There is no option to scale the SVG while maintaining the aspect
ratio. Overall, element needs a rewrite.
Let's just disable deprecations. The API is not going anywhere.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6726>
There was an issue with this equality check, which was to figure out what to do
with PCR pids (whether they were part of the streams present or not) and whether
we ignore PCR or not.
Turns out ... we already took care of that further up in the function.
The length check can be simplified by just checking whether the length of
the *original* PMT and the new PMT are identical. Since we don't store "magic"
PCR streams in those, we can just use them as-is.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6713>
Set as much information as possible on the slot (including the associated
track) *before* the associated source pad is added to the element.
We need this so that incoming event/queries can be replied to if they are
received when adding the pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6690>
An application that triggers a state transition from PLAYING to PAUSED
needs to acquire the LIVE_LOCK. Consequently the LIVE_LOCK must not be
taken while pushing anything on the pads because this operation might
get blocked by something that cannot be unblocked without the
application being able to proceed with the state transitions for other
elements in the pipeline. This commit extends the previous behaviour
where the live lock was released before pushing buffers (indirectly
through the unlock before subclass->create) to now also include
unlocking before pushing events.
The issue was discovered in a case for WebRTC where the application
tried to shut down a pipeline but an event originating from a video
source element (based on basesrc) was in the process of being pushed
down the pipeline when it got stuck on the STREAM_LOCK for the pad after
the rtpgccbwe element. This lock in turn was held by the rtcpgccbwe
element as it was in the process of pushing data down the pipeline but
was stuck on the blocking probes installed on dtlssrtpenc to prevent
data from flowing before dtls keys had been negotiated. What should have
happened here is that the blocking probes should be removed, but that
can only happen if the application may continue driving the state
transitions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6671>
A DPB buffer held by codec picture object may not be writable
at the moment, then gst_buffer_make_writable() will unref passed buffer.
Specifically, the use after free or double free can happen if:
* Crop meta of buffer copy is required because of non-zero
top-left crop position
* zero-copy is possible with crop meta
* A picture was duplicated, interlaced h264 stream for example
Interlaced h264 stream with non-zero top-left crop position
is not very common but it's possible configuration in theory.
Thus gst_buffer_make_writable() should be called with
GstVideoCodecFrame.output_buffer directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6706>
A DPB buffer held by codec picture object may not be writable
at the moment, then gst_buffer_make_writable() will unref passed buffer.
Specifically, the use after free or double free can happen if:
* Crop meta of buffer copy is required because of non-zero
top-left crop position
* zero-copy is possible with crop meta
* A picture was duplicated, interlaced h264 stream for example
Interlaced h264 stream with non-zero top-left crop position
is not very common but it's possible configuration in theory.
Thus gst_buffer_make_writable() should be called with
GstVideoCodecFrame.output_buffer directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6706>
The goal of this code was, for programs which were updates (i.e. adding/removing
streams but not completely changing) to allow dynamic addition/removal of
streams without completely removing everything.
But this wasn't 100% tested and there are a bunch of issues which make it fail
in plenty of ways.
For now disable that feature and force the legacy "add all pads again and then
remove old ones" behaviour to make it switch.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6651>
In addition to device removed status monitoring in gst_d3d11_result()
method, if ID3D11Device4 interface is available,
an event handle will be used for device removed status update.
And "device-removed" signal is removed since applications can monitor
the device removed status via gobject notify
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6699>
Adding new property in order to notify users of device removed status.
Once device removed status is detected, application should release
all ID3D12Device objects corresponding to the adapter, including
GstD3D12Device object. Otherwise D3D12CreateDevice() call for the
adapter will fail.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6699>
It seems that when D3D11CreateDevice collides in time
with other D3D11 calls, in particular the proccess of
creating a shader, it can corrupt the memory in the driver.
D3D11 spec doesn't seem to require any thread safety from
D3D11CreateDevice. Following MSDN, it is supposed to be called
in the beginning of the proccess, while GStreamer calls it with each
new pipeline.
Such crashes in the driver were frequently reproducing on the
Intel UHD 630 machine.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6686>
We suspect that it's not thread safe to just create and
destroy the device from any thread, particularly because
of D3D11CreateDevice, that is not documented as thread-safe.
While D3D11CreateDevice is usually protected from outside
by the gst_d3d11_ensure_element_data, it still can cross
with the Release() method of another device.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6686>
If propose_allocation comes before set_caps, self->video_info
has not been extracted from caps and self->video_info.size is 0.
It causes buffer pool fail to set config . So need to use info
size got from query instead when propose_allocation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6666>
Otherwise, if we run in to the copy case, this can cause these
groups to stay around with queued flag set, but never actually
queued, until gst_v4l2_allocator_flush() is called, which then
erroneously frees the associated memories, causing the release
function to decrement the allocator refcount where it was never
incremented, resulting in early allocator disposal, and either
deadlock or use after free.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6552>
Clarify the fact that `encodebasebin->src_pad` is set when using a static source
pad (`encodebin`) and when not set it's dynamically added source
pads (`encodebin2`).
Fixes usage of encodebin2 when profiles are updated
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6667>
The caps obtained from parsing the allocation query is borrowed and
should not be unreffed. This fixes criticals assertion introduced in
1.24.1.
(gst-launch-1.0:242): GStreamer-CRITICAL **: 19:48:02.667:
gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Fixes: 5189e8b956 ("v4l2codecs: decoders: Add DMA_DRM caps support")
Closes#3462
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6679>
We used to only track the first one but this was wrong, so we start
tracking all the children properties here, adapting the test which
was already thought for this to be implemented.
At the same time add some flags to determine how children properties
need to be handled adding a mode that means that all duplicated
children props will be set together when the user sets that particular
child property. This is going to be tested in a following commit.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/918>
Some decoder drivers need to wait enough capture buffers before
starting to decode. But the dequeued buffer flag LAST but empty
has no chance to queue back to driver, which makes decode hang
after seek. So need to queue back such kind of buffer to driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6579>
Output buffers don't have to be writable. Accepting read-only buffers
from the V4L2 buffer pool allows upstream elements to write directly
into the V4L2 buffers without triggering a CPU copy into a new buffer
from the same V4L2 buffer pool every time.
Tested with the vivid output device:
GST_DEBUG=GST_PERFORMANCE:7 gst-launch-1.0 videotestsrc ! v4l2sink device=/dev/video5
With this change, gst_v4l2_buffer_pool_dqbuf() must be allowed to not
resize read-only memories of output buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6572>
../subprojects/gst-plugins-bad/tests/check/libs/gstlibscpp.cc:41:
fatal error: gst/mpegts/gstmpegts-enumtypes.h: No such file or directory
Could only pass the needed deps to the libscpp test, but gets
messier to maintain, so let's at it for consistency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6643>
When using v2.0.2 of the subproject, it triggers werror for
unused functions that come from the fdkaac headers.
This avoids errors like the following when werror is set.
```
subprojects/fdk-aac-2.0.2/fdk-aac/FDK_audio.h:757:29: error: ‘FDKlibInfo_lookup’
defined but not used [-Werror=unused-function]
757 | static FDK_AUDIO_INLINE INT FDKlibInfo_lookup(const LIB_INFO* info,
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6611>
Since https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6153 ,
subtitle "decoders" (i.e. which decode to raw text) are no longer auto-plugged
by parsebin.
But if a given format does not have a parser at all, we would end up outputting
non-time/non-parsed outputs.
In order to mitigate the issue, until such parsers are available, we check if
the subtitle stream is in TIME format or not (i.e. whether it comes from a
parser or demuxer). If not, we attempt to plug in a subtitle "decoder".
Fixes#3463
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6592>
Fix
gstanalyticsmeta.c:134: Warning: GstAnalytics: "@instance"
parameter unexpected at this location
warning (caused by the extraneous empty line in the doc chunk)
and align function arguments with documentation and header file
(handle -> instance).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6585>
* RED_OR_ALPHA8 will map value to alpha for OpenGL, use R8 to avoid
2nd shader
* Determine texel size for proper texture memory preparation
* QByteArray::fromRawData() does shallow copy and thus leads to use of
corrupted memory
* Make sure RGBA dummy texture is fully opaque
* QRhiTexture::create() must be called to allocate texture resources
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6578>
