Sebastian Dröge
f6f078e847
omxvideodec: Don't forget to free a GList
2012-12-20 12:02:30 +01:00
Sebastian Dröge
20280afa1f
omxvideodec: Map OMX_COLOR_FormatYUV420PackedPlanar to I420 too
...
This is used on the Raspberry Pi.
2012-12-20 11:56:29 +01:00
Sebastian Dröge
a80e2b9053
omxvideodec: During negotiation of the output format make sure we use the correct OpenMAX format
2012-12-20 11:55:36 +01:00
Sebastian Dröge
07e0d674a0
omxvideodec: If negotiation fails this could also mean that the component can't do it at this point yet
2012-12-20 11:42:17 +01:00
Sebastian Dröge
7354baec66
omxvideodec: Improve format negotiation a bit
...
Don't leak caps and make sure to fixate caps.
2012-12-20 11:40:28 +01:00
Sebastian Dröge
a70a71b9a5
omx: Also initialize nStep field of the OMX structures
2012-12-19 13:05:28 +01:00
Sebastian Dröge
73dc5bb199
omx: Initialize struct version with the OMX version we compiled with
2012-12-19 13:03:37 +01:00
Sebastian Dröge
9c464924a5
omxvideodec: Extract data from the input buffer, not the codec data
2012-12-19 12:44:31 +01:00
Sebastian Dröge
b93d86abbe
omx: Use has_suffix() instead of has_prefix() for the Broadcom hack
2012-12-19 12:19:12 +01:00
Sebastian Dröge
5105daba1a
omx: Add hack to load and initialize libbcm_host.so
...
Needed on the Raspberry Pi. Patch based on a patch by
George Kiagiadakis <george.kiagiadakis@collabora.com>
2012-12-19 11:31:51 +01:00
Sebastian Dröge
7c53535026
configure: Add configure option to pack OpenMAX structures
...
This is required to set to 4 for the Raspberry Pi for example.
2012-12-19 11:26:36 +01:00
George Kiagiadakis
147dd89e21
omx: Initialize structures to version 1.1.2
2012-12-19 11:26:36 +01:00
Sebastian Dröge
31bf1c8bd6
config: Add raspberry-pi configuration in a different directory
2012-12-19 11:26:36 +01:00
George Kiagiadakis
78035a4848
raspberry: Add a gstomx.conf for the Raspberry Pi
2012-12-19 11:07:25 +01:00
Sebastian Dröge
3244201b49
omx: Fix some compilation errors caused by circular includes
2012-12-12 17:45:39 +00:00
Sebastian Dröge
7fa4616598
omx: Fix refcount problem with frames being dropped because of decoder bugs
2012-11-12 15:14:09 +01:00
Sebastian Dröge
2481ceb8c4
omx: Update to new GLib thread API
2012-11-12 11:29:48 +01:00
Sebastian Dröge
bced70525a
omx: Use open/close vfuncs
2012-10-22 14:34:53 +02:00
Sebastian Dröge
9d0e582484
omx: Handle video meta correctly
2012-10-22 14:28:04 +02:00
Sebastian Dröge
5fdb490f1a
omx: Port to video base classes from -base
2012-10-22 14:20:41 +02:00
Tim-Philipp Müller
49ba281e8b
omx: gst_element_class_set_details_simple() -> set_static_metadata()
2012-10-17 17:57:43 +01:00
George Kiagiadakis
f93feb2644
omx: fix debug statement
2012-09-03 12:37:02 +03:00
George Kiagiadakis
8a669ee308
omx: use recursive_lock inside set_last_error(), since this function may be called from an event handler
2012-09-03 12:36:53 +03:00
Tim-Philipp Müller
3f963f87fb
omx: fix plugin name for new GST_PLUGIN_DEFINE API
2012-08-03 19:32:13 +01:00
Sebastian Dröge
48163f60f0
omx: Update for allocation query API changes
2012-07-10 09:57:09 +02:00
Sebastian Dröge
e84fee6488
omx: Fix compilation after gst_pad_start_task() API changes
2012-06-20 11:09:13 +01:00
George Kiagiadakis
7b3dac67af
omx: Fix spelling mistake found by lintian: s/Seperate/Separate/
2012-05-08 16:16:00 +03:00
George Kiagiadakis
158775f497
Implement a new custom recursive mutex type and fix locking in callbacks so that in-context calls are allowed.
...
According to the OMX specification, implementations are allowed to call
callbacks in the context of their function calls. However, our callbacks
take locks and this causes deadlocks if the unerlying OMX implementation
uses this kind of in-context calls.
A solution to the problem would be a recursive mutex. However, a normal
recursive mutex does not fix the problem because it is not guaranteed
that the callbacks are called from the same thread. What we see in Broadcom's
implementation for example is:
- OMX_Foo is called
- OMX_Foo waits on a condition
- A callback is executed in a different thread
- When the callback returns, its calling function
signals the condition that OMX_Foo waits on
- OMX_Foo wakes up and returns
The solution I came up with here is to take a second lock inside the callback,
but only if recursion is expected to happen. Therefore, all calls to OMX
functions are guarded by calls to gst_omx_rec_mutex_begin_recursion() / _end_recursion(),
which effectively tells the mutex that at this point we want to allow calls
to _recursive_lock() to succeed, although we are still holding the master lock.
2012-05-07 17:01:16 +03:00
George Kiagiadakis
5c15caef8e
omx: Add hack to disable setting roles to components.
...
Conflicts:
omx/gstomx.c
2012-05-03 13:21:18 +02:00
George Kiagiadakis
7ca067be28
omxvideodec: Implement no-empty-eos-buffer hack, as in omxvideoenc.
...
Conflicts:
omx/gstomxvideodec.c
2012-05-03 12:24:43 +02:00
George Kiagiadakis
4aa3fa8a0d
omxvideodec: Fix coding style in the drain-may-not-return hack code
2012-05-03 12:20:05 +02:00
Arun Raghavan
34a83c184e
omx: Fix trivial debug print bug
2012-04-26 09:42:54 +05:30
Arun Raghavan
9e4cddee7e
omxvideodec: Add hack for Ducati components not returning from drain
...
This happens on the Galaxy Nexus, and causes the pipeline to hang waiting
endlessly for a drain. The hack replaces the wait with a wait + 500ms timeout.
2012-04-26 09:42:52 +05:30
Arun Raghavan
036cd16756
omx: Fix deadlock between ending a flush and the event handler
...
gst_omx_port_set_flushing() calls OMX_FillThisBuffer at the end of a flush
without releasing the port lock, and this can cause a deadlock with the
EventHandler. This patches fixes this by dropping the lock for the duration of
the fill buffer call.
2012-04-26 09:42:50 +05:30
Sebastian Dröge
d99fa5e3b3
omx: Update video encoder/decoder base classes from gst-plugins-bad
2012-04-24 15:41:38 +02:00
Sebastian Dröge
3523724970
omxaudioenc: Use gst_buffer_extract() to copy the input buffer data to the OpenMAX buffer
2012-04-16 08:35:33 +02:00
Alessandro Decina
e6e3f05948
Fix relative/absolute path glitch
...
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>
2012-04-13 17:16:42 -04:00
Olivier Crête
ff2603a727
Port to Gst 0.11
2012-04-13 12:16:34 -04:00
Reynaldo H. Verdejo Pinochet
766dc7c541
Enable building with Android's buildsystem
...
This change adds prelimary buildsystem hooks to
build gst-omx with the Android buildsystem. Like
the rest of GStreamer's Android hooks, the process
relies on the availability of androgenizer. A tool
developed by Collabora to automatically generate
Android.mk files from within the auto* setup.
Androgenizer is currently available at:
http://cgit.collabora.com/git/user/derek/androgenizer.git/
2012-01-19 14:08:12 -03:00
Sebastian Dröge
4fd185be6f
basevideocodec: Don't use G_TYPE_REGISTER_BOXED() yet
...
This would require GLib 2.26.
2011-12-14 21:15:29 +01:00
Jonas Larsson
887d43c290
omxaudioenc: Add hack for encoder components that don't allow empty EOS buffers
2011-12-14 10:09:34 +01:00
Jonas Larsson
2cab5b5db5
omxvideoenc: Fix deadlock when using the EOS hack
2011-12-14 10:07:29 +01:00
Sebastian Dröge
3db75118dd
omxvideoenc: Remove workaround for basevideocodec bug
2011-12-12 14:26:48 +01:00
Sebastian Dröge
4c225f9cdd
omxvideodec: Remove workaround for basevideocodec bug
2011-12-12 14:26:34 +01:00
Matej Knopp
30005be2e5
basevideo: Make GstVideoFrame a reference counted boxed object
...
...and also clear all existing frames when resetting the decoder or encoder.
2011-12-12 14:24:47 +01:00
Sebastian Dröge
9e6665e8f8
omx: Add hack for encoder components that don't allow empty EOS buffers
2011-12-09 12:24:01 +01:00
Dake Gu
b8b64ac746
omxaacenc: Generate and set codec_data on the caps for raw AAC
2011-12-09 10:21:47 +01:00
Alessandro Decina
247e410df0
basevideoencoder: handle failures in start() and stop()
2011-12-08 11:56:58 +01:00
Vincent Penquerc'h
f27ca88ecc
basevideoenc: do not try to calculate latency from an unknown framerate
...
It'll divide by zero, and latency is unknown for an unknown framerate.
Fixes an assert in the schroenc test.
https://bugzilla.gnome.org/show_bug.cgi?id=657419
2011-12-08 11:55:03 +01:00
Sebastian Dröge
8e662fffb0
basevideoencoder: Only make the header buffer metadata writable, not the buffer
2011-12-08 11:50:49 +01:00
Sebastian Dröge
9ea6e7d2f2
basevideoencoder: Fix handling of force-keyunit events
2011-12-08 10:18:36 +01:00
Sebastian Dröge
766f5bd161
omxaudioenc: Don't forward EOS events immediately but let all other events be handled by the base class
...
Previously this logic was inversed, which did not make any sense at all.
2011-12-06 13:28:41 +01:00
Sebastian Dröge
064e4c628c
omxaudioenc: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:47:25 +01:00
Sebastian Dröge
05ad3343bf
omxvideodec: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:47:12 +01:00
Sebastian Dröge
bd60f141e9
omxvideoenc: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:46:51 +01:00
Sebastian Dröge
0cb32a4ebd
omx: Improve debugging of buffer handling
2011-12-05 13:18:09 +01:00
Sebastian Dröge
781e61d569
omxvideoenc: Drop EOS events in ::finish()
...
The event will be forwarded downstream from the srcpad
loop function after the last buffer was generated by the
component. Forwarding it after ::finish() will use the
sinkpad streaming thread and does not guarantee that
the encoder is completely drained.
2011-12-05 08:12:48 +01:00
Sebastian Dröge
b4e632cefe
omxvideodec: Properly drop frames due to QoS
...
Instead of finishing them they should be passed to drop(), which
will then send QoS messages.
2011-12-01 16:20:36 +01:00
Jonas Larsson
9c4b926c41
omxh264enc: Add support for resending headers after a forced-keyframe
2011-11-29 12:21:32 +01:00
Sebastian Dröge
458199abfb
basevideoencoder: Pass the all-headers field of the force-key-unit event to the subclass
2011-11-29 12:20:09 +01:00
Sebastian Dröge
3cb4bbe97e
basevideoencoder: Implement full support for the new force-key-unit event
...
Including support for the running-time and count fields.
2011-11-29 12:20:09 +01:00
Sebastian Dröge
11b2dea82d
basevideoencoder: Use new force-keyunit event API from gst-plugins-base
2011-11-29 12:20:09 +01:00
Sebastian Dröge
77db7e5780
basevideoencoder: Adjusting padding is not required for -bad libraries
2011-11-29 12:20:09 +01:00
Sebastian Dröge
db756fb190
basevideoencoder: Move some fields to the private part of the instance struct
2011-11-29 12:20:09 +01:00
Sebastian Dröge
050700d561
basevideoencoder: Make headers metadata writable before pushing downstream
...
The timestamp, duration, etc of the headers has to be changed.
2011-11-29 12:20:09 +01:00
Sebastian Dröge
1f3f8c9dc5
basevideoencoder: Push the downstream force-keyframe event after the next keyframe
...
Even if the corresponding GstVideoFrame doesn't have the is_sync_point
flag set.
2011-11-29 12:20:09 +01:00
Sebastian Dröge
38b3f1ac00
basevideoencoder: Don't push an upstream force-keyunit event downstream
2011-11-29 12:20:09 +01:00
Jonas Larsson
36d2a21aa3
basevideoencoder: Add initial support for the all-headers field of the force-keyframe event
...
See bug #607742 .
2011-11-29 12:20:09 +01:00
Tim-Philipp Müller
b42f17240a
basevideodecoder: some more debug logging
2011-11-28 16:17:19 +00:00
Tim-Philipp Müller
f40c93efb0
basevideodecoder: add API to drop a frame and post a QoS message on the bus
...
https://bugzilla.gnome.org/show_bug.cgi?id=640017
API: gst_base_video_decoder_drop_frame()
2011-11-28 16:17:19 +00:00
Tim-Philipp Müller
f27800d598
docs: fix comment in gst_base_video_decoder_get_max_decode_time() docs
2011-11-28 16:17:19 +00:00
Tim-Philipp Müller
f1bbb0f8a4
basevideodecoder: fix weird event list handling
...
Get rid of weird code that copies a list manually, taking
ownership of the elements and then frees the old list. Instead,
just take over the old list entirely. (If the intent was to
reverse the list, one could use g_list_reverse() instead).
Then, push events in the list out from last to first (since they
were prepended as they came in) instead of just pushing out the
last in the list and leaking the others.
2011-11-28 16:17:19 +00:00
Sebastian Dröge
217ac7b3be
omxaudioenc: Use audio base classes from gst-plugins-base instead of having our own copies
2011-11-25 11:31:58 +01:00
Sebastian Dröge
9917fbe4c5
omxaudioenc: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 10:00:31 -08:00
Sebastian Dröge
be4e1e184e
omxvideoenc: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 09:59:43 -08:00
Sebastian Dröge
1c0396de0e
omxvideodec: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 09:58:58 -08:00
Sebastian Dröge
47d66cadfa
omx: Only disabling of a port is like flushing, enabling is like unflushing
2011-11-17 14:38:54 -08:00
Sebastian Dröge
c144ebd054
omx: Enabling/disabling a port is also like flushing
...
The component returns all buffers to us and shouldn't get any
new buffers passed anymore.
2011-11-17 14:11:51 -08:00
Sebastian Dröge
8a5fbb876c
omxaudioenc: Signal the drain GCond even if downstream returned an error
2011-11-17 11:29:39 -08:00
Sebastian Dröge
1ba8ec3d37
omxvideoenc: Signal the drain GCond even if downstream returned an error
2011-11-17 11:29:39 -08:00
Sebastian Dröge
1371dafae4
omxvideodec: Signal the drain GCond even if downstream returned an error
2011-11-17 11:29:18 -08:00
Sebastian Dröge
cc50d894af
basevideoencoder: Only call ::reset once in READY->PAUSED
2011-11-17 10:34:19 -08:00
Sebastian Dröge
7df465bfb3
omxaudioenc: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:47 -08:00
Sebastian Dröge
2408e0d33a
omxvideoenc: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:47 -08:00
Sebastian Dröge
30610a746e
omxvideodec: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:47 -08:00
Sebastian Dröge
879349ba11
omxvideoenc: Set force_keyframe to FALSE after handling it
...
There's no reason why the base class should forward the event
further downstream if we already handled it and will insert a
keyframe.
2011-11-16 12:02:08 -08:00
Sebastian Dröge
c99af4a32e
omxvideodec: Always push buffers downstream, even if we didn't find a corresponding GstVideoFrame
2011-11-16 11:21:25 -08:00
Sebastian Dröge
70b735da82
omx: Fix debug level for flushing in wrong state from ERROR to DEBUG
...
It's not really an error and doesn't matter at all if flush is called
when the component is not running.
2011-11-15 09:47:55 -08:00
Sebastian Dröge
1b58fa487e
omxh264enc: Detect bytestream stream format and don't put SPS/PPS into the caps for this format
2011-11-15 08:40:07 -08:00
Sebastian Dröge
22ba4e1b9e
omxvideoenc: Add vfunc for handling the output frames
...
This can be used by subclasses to override the buffer flags
or to handle some frames differently than the default behaviour.
2011-11-15 08:28:32 -08:00
Sebastian Dröge
0f07403ff2
omxvideodec: Don't release buffers twice if dropping because of QoS
2011-11-14 12:50:26 -08:00
Sebastian Dröge
6736a39671
omx: Add XXX to the nOffset reset hack comment for QCOM
2011-11-14 09:13:06 -08:00
Sebastian Dröge
1ab4e4b945
omxaudioenc: Make srcpad caps setting threadsafe
2011-11-10 15:18:08 +01:00
Sebastian Dröge
0a4e222e60
omxvideoenc: Make srcpad caps setting threadsafe
2011-11-10 15:17:56 +01:00
Sebastian Dröge
30d2f970f9
omxvideodec: Make srcpad caps setting threadsafe
2011-11-10 15:17:41 +01:00
Sebastian Dröge
f0775fac6f
omxaudioenc: Make the srcpad task and the sinkpad streaming thread handling threadsafe
2011-11-10 15:10:14 +01:00
Sebastian Dröge
b62ffe1ada
omxaudioenc: Always flush the ports and make sure no processing is happening in ::flush
...
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-10 15:03:05 +01:00
Sebastian Dröge
fbe171ee2c
omxvideoenc: Always flush the ports and make sure no processing is happening in ::reset
...
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-10 15:02:22 +01:00
Sebastian Dröge
e56cff5f2a
omxvideoenc: Fix minor race condition when draining after upstream signalled EOS
2011-11-10 15:01:36 +01:00
Sebastian Dröge
05e4b48855
omxaudioenc: Improve EOS handling
...
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-10 14:56:19 +01:00
Sebastian Dröge
56bcfc0397
omxvideoenc: Improve EOS handling
...
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-10 14:56:11 +01:00
Sebastian Dröge
1b7742ca98
omxaudioenc: Improve debugging of EOS and draining
2011-11-10 14:54:33 +01:00
Sebastian Dröge
abd399ecbc
omxvideoenc: Improve debugging of EOS and draining
2011-11-10 14:54:17 +01:00
Sebastian Dröge
b36db47cba
omxvideodec: Log if acquiring buffer for EOS failed
2011-11-10 14:51:06 +01:00
Sebastian Dröge
3412ecf538
omxvideodec: The component is not started in READY
2011-11-10 14:42:13 +01:00
Sebastian Dröge
8c1aee4171
omxaudioenc: No need to signal the drain cond when going from READY to PAUSED
...
Also the component is not started in READY
2011-11-10 14:41:50 +01:00
Sebastian Dröge
de7d237851
omxvideoenc: No need to signal the drain cond when going from READY to PAUSED
...
Also the component is not started in READY.
2011-11-10 14:41:50 +01:00
Sebastian Dröge
6e41e31e6c
omxvideodec: Always flush the ports and make sure no processing is happening in ::reset
...
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-09 15:46:39 +01:00
Sebastian Dröge
60a6c1b49f
omxvideodec: Fix minor race condition when draining after upstream signalled EOS
2011-11-09 15:45:20 +01:00
Sebastian Dröge
92c26f684a
omxvideodec: Improve EOS handling
...
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-09 15:44:11 +01:00
Sebastian Dröge
c026bee8c6
omxvideodec: Improve debugging of EOS and draining
2011-11-09 15:43:32 +01:00
Sebastian Dröge
59faafc30b
omxvideodec: The component is not started already when going from READY to PAUSED
2011-11-09 15:42:46 +01:00
Sebastian Dröge
6c2cca3e94
omxvideodec: No need to signal the drain cond when going from READY to PAUSED
2011-11-09 15:42:13 +01:00
Sebastian Dröge
b66fd610d6
omx: Always reset buffer flags for output ports, even in flushing/error state
2011-11-09 15:41:02 +01:00
Sebastian Dröge
cf22a12156
omxvideodec: Improve debugging in case of QoS-related frame drops
2011-11-09 09:00:57 +01:00
Sebastian Dröge
fb5d700ec9
omxvideoenc: Release the video codec stream lock before acquiring an input buffer
...
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:47:00 +01:00
Sebastian Dröge
b45197c0d7
omxaudioenc: Release the audio encoder stream lock before acquiring an input buffer
...
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:47:00 +01:00
Sebastian Dröge
3da6d8bfa3
omxvideodec: Release the video codec stream lock before acquiring an input buffer
...
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:47:00 +01:00
Sebastian Dröge
17d0751887
omxaudioenc: Don't try to drain the component after EOS
...
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 11:10:57 +01:00
Sebastian Dröge
2d6239678f
omxvideoenc: Don't try to drain the component after EOS
...
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 11:10:52 +01:00
Sebastian Dröge
9251e0004c
omxvideodec: Don't try to drain the component after EOS
...
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 11:08:06 +01:00
Sebastian Dröge
b10c2cfc72
omxvideodec: Implement dropping of too late frames via QoS
2011-11-08 09:09:28 +01:00
Sebastian Dröge
093a27fea3
omxaudioenc: Minor code refactoring
2011-11-08 08:31:58 +01:00
Sebastian Dröge
ae6616ad0d
omxvideoenc: Minor code refactoring
2011-11-08 08:31:43 +01:00
Sebastian Dröge
d4eb77fa2b
omxvideodec: Make sure to always release buffers back to OMX
2011-11-08 08:31:32 +01:00
Sebastian Dröge
1d071c05dc
omx: Also properly release buffers when in error state
2011-11-08 08:24:49 +01:00
Jonas Larsson
0682012181
omx: Properly release buffers during flushing
...
We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer()
but instead of doing nothing we have to put them back into our queue.
Otherwise the buffer is leaked and we will have too few buffers in
the future.
2011-11-08 08:24:49 +01:00
Sebastian Dröge
9151617d39
omxvideodec: Free pending frames after draining component
2011-11-07 14:00:47 +01:00
Sebastian Dröge
0b301021de
omxvideoenc: Free pending frames after draining the component
2011-11-07 14:00:35 +01:00
Sebastian Dröge
636cdd31bf
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 11:07:01 +01:00
Sebastian Dröge
9a6cea5af3
omxvideoenc: Fix deadlock between srcpad stream lock and ::reset()
2011-11-07 11:05:29 +01:00
Sebastian Dröge
95b06504f9
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 11:04:27 +01:00
Sebastian Dröge
a80ca97ec3
omxvideoenc: Free all pending frames after draining the component
2011-11-07 10:58:44 +01:00
Sebastian Dröge
be1f75d2f4
omxvideodec: Always free all pending frames when caps changes require reconfiguration
2011-11-07 10:58:24 +01:00
Sebastian Dröge
0c0aa78373
omxaudioenc: Only drain the component a single time and only after processing started
2011-11-04 09:44:04 +01:00
Sebastian Dröge
d5371b9208
omxvideodec: Only drain the component a single time and only after processing started
2011-11-04 09:44:04 +01:00
Sebastian Dröge
3a17d11109
omxvideoenc: Only drain the component a single time and only after processing started
2011-11-04 09:44:04 +01:00
Sebastian Dröge
fa6881c1cc
omx: Reset buffer flags to 0 after it was consumed by the component or the element
...
Some implementations don't reset the flags and the standard is not
really clear on the expected behaviour. Let's just always reset the
flags as they're not valid at this point anymore.
2011-11-04 09:04:16 +01:00
Sebastian Dröge
ef67a43702
omxvideoenc: Better handling of encoder parameters
...
Only set them if necessary and allow to use the component
defaults.
2011-11-02 13:50:14 +01:00
Sebastian Dröge
08fabd6a07
omxvideoenc: Make unsupported bitrate/quantizer settings less fatal
2011-11-02 13:22:50 +01:00
Sebastian Dröge
ec9dde48e5
omxvideodec: If no stride was set for the OMX output port assume GStreamer stride
...
This is not really correct but there's nothing else we could do.
2011-11-02 10:39:50 +01:00
Sebastian Dröge
7ebef2941b
omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride
...
This is not really correct but there's nothing else we could do.
2011-11-02 10:39:10 +01:00
Sebastian Dröge
1ef38751c7
omxaudioenc: Implement draining of the component and use it
...
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:46:09 +01:00
Sebastian Dröge
8eaf25c10e
omxvideoenc: Implement draining of the component and use it
...
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:41:46 +01:00
Sebastian Dröge
e4b7ffcc1b
omxvideodec: Implement draining of the component and use it
...
This makes sure that all buffers are decoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:23:22 +01:00
Sebastian Dröge
2f2c17a1b5
omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer
2011-11-01 16:23:22 +01:00
Sebastian Dröge
f93a45fb66
omxaudioenc: Forward downstream flow returns to upstream
2011-11-01 15:10:12 +01:00
Sebastian Dröge
21faf556ff
omxvideoenc: Forward downstream flow returns to upstream
2011-11-01 15:10:01 +01:00
Sebastian Dröge
3b4260e54f
omxvideodec: Forward downstream flow returns to upstream
2011-11-01 13:58:38 +01:00
Sebastian Dröge
10a5680692
omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 15:21:07 +02:00
Sebastian Dröge
6689faa661
omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 15:20:47 +02:00
Sebastian Dröge
cf6f14d03c
omxvideodec: Move locking at the correct place
2011-10-20 14:30:38 +02:00
Sebastian Dröge
72fa93956b
omx: Remove QCOM hack to reset nOffset in EmptyBufferDone
...
This is now done in a generic way that does not require any
hacks because it will work without any side effects on any
OMX implementation.
2011-10-14 10:27:47 +02:00
Sebastian Dröge
2750a8869b
omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0
...
Some OMX implementations don't reset nOffset when the complete
buffer is emptied but instead only reset nFilledLen. We reset
nOffset to 0 if nFilledLen == 0, which is safe to do because
the offset *must* be 0 if the buffer is not filled at all.
Seen in QCOM's OMX implementation.
2011-10-14 10:26:21 +02:00
Sebastian Dröge
ac8085dce9
omxvideoenc: If one parameter/configuration is not supported don't skip the next
2011-10-10 10:38:29 +02:00
Sebastian Dröge
37967b4316
omxh264dec: Require stream-format=byte-stream
...
Other stream-formats are unlikely to be supported by OMX components.
2011-10-03 09:13:29 +02:00
Sebastian Dröge
bb1dd8aaba
omxvideodec: Add API for subclasses to prepare/convert frames
2011-09-29 10:44:20 +02:00
Sebastian Dröge
febb83ec54
omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
...
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-28 10:35:38 +02:00
Sebastian Dröge
e364088596
omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
...
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-28 10:35:37 +02:00
Sebastian Dröge
ab9ce7db7d
omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers
...
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-28 10:35:37 +02:00
Sebastian Dröge
792cdb7d1f
omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes
2011-09-28 10:35:31 +02:00
Sebastian Dröge
a7f77e22a4
omx: Change a g_assert() into a GST_WARNING_OBJECT()
2011-09-27 12:28:22 +02:00
Sebastian Dröge
837fc4ca66
omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone
2011-09-26 13:05:23 +02:00
Sebastian Dröge
7dbf68a232
omxaudioenc: Add a check to prevent a zero-sized OMX buffer
2011-09-23 17:04:15 +02:00
Sebastian Dröge
d5452a53b0
omxvideoenc: Add some more checks for correct OMX buffer sizes
2011-09-23 17:04:14 +02:00
Sebastian Dröge
5659bd3b4f
omxvideodec: Add some more checks for OMX buffer sizes
2011-09-23 16:40:30 +02:00
Sebastian Dröge
f0fe1148b7
omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer()
...
This correctly works around the QCOM race condition that happens when calling
FTB after setting the new state and before reaching it.
2011-09-14 10:16:41 +02:00
Sebastian Dröge
3ba45aa0af
omxvideodec: Negotiate video format with downstream and what the component claims to support
2011-09-02 14:43:43 +02:00
Vincent Penquerc'h
fa2dff1ad6
basevideoencoder: fix element leak
...
and this concludes an hour of yelling at the bloody test failing,
only to track down the problem not being in the test.
https://bugzilla.gnome.org/show_bug.cgi?id=657368
2011-08-26 10:27:16 +02:00
Sebastian Dröge
9eb39ceef2
omxvideoenc: Release basevideocodec stream lock while waiting for a buffer
...
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-19 09:23:58 +02:00
Sebastian Dröge
e583c48222
omxvideodec: Release basevideocodec stream lock while waiting for a buffer
...
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-19 09:23:54 +02:00
Sebastian Dröge
e494792ca4
basevideodecoder: Fix deadlock
2011-08-18 10:24:40 +02:00
Sebastian Dröge
024f61e75a
baseaudiodecoder: Don't take the stream lock in the seek handler
...
This will lead to deadlocks
2011-08-18 10:03:20 +02:00
Sebastian Dröge
58104f9ce5
basevideo: Fix locking, especially if both pads have different streaming threads
2011-08-18 10:02:50 +02:00
Sebastian Dröge
d439d8c337
basevideo: Don't call g_type_class_peek_parent() in class_init
...
This is already done by the GObject boilerplate macro
2011-08-18 09:42:02 +02:00
Sebastian Dröge
6991638d72
baseaudiodecoder: Don't call g_type_class_peek_parent() in class_init
...
This is already done by the boilerplate macro
2011-08-18 09:40:46 +02:00
Sebastian Dröge
affd6e2eb9
baseaudiodecoder: Fix thread safety issues if both pads have different streaming threads
2011-08-18 09:34:38 +02:00
Sebastian Dröge
fc511eb45d
baseaudiodecoder: Delay sending of serialized events to finish_frame()
2011-08-18 09:17:04 +02:00
Sebastian Dröge
c5360dfae8
omxaudioenc: Always require at least OMX_MIN_PCMPAYLOAD_MSEC per input buffer
2011-08-17 14:33:31 +02:00
Sebastian Dröge
d42390efd9
baseaudioencoder: Add support for requesting a minimum and maximum number of samples per frame
...
This extends the special case of a fixed number of samples per frame
that was supported before already.
2011-08-17 14:28:44 +02:00
Sebastian Dröge
1daa53e554
omxaudioenc: Handle inbuf==NULL properly in ::handle_frame()
2011-08-17 14:17:18 +02:00
Sebastian Dröge
0928205ed4
omxaacenc: Implement ::get_num_samples() vfunc
2011-08-17 13:04:19 +02:00
Sebastian Dröge
d1e1980e01
omxaudioenc: Add vfunc to get the number of samples inside a buffer
2011-08-17 13:03:50 +02:00
Sebastian Dröge
92545e554c
omxaudioenc: Release baseaudioencoder stream lock while waiting for a buffer in ::handle_frame()
...
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-17 11:34:31 +02:00
Sebastian Dröge
60a1e0e967
baseaudioencoder: Fix thread safety issues if both pads have different streaming threads
2011-08-17 11:34:04 +02:00
Sebastian Dröge
ebc740ea06
baseaudioencoder: Taking the OBJECT lock in reset() is not needed
2011-08-17 09:58:01 +02:00
Sebastian Dröge
c24533c8be
omxaudioenc: Remove hack that only applies to the video encoder class
2011-08-16 11:03:24 +02:00
Sebastian Dröge
422ca1796b
omxaacenc: Add initial version of OpenMAX AAC encoder element
2011-08-16 10:49:21 +02:00
Sebastian Dröge
3f33a577a9
omxaudioenc: Add initial version of audio encoder base class
2011-08-16 10:48:36 +02:00
Sebastian Dröge
c0202cc283
baseaudioencoder: Delay sending of serialized events to finish_frame()
2011-08-15 14:14:11 +02:00
Sebastian Dröge
0a44778d61
audio: Integrate audio base classes into the build system and fixup
2011-08-15 13:06:51 +02:00
Sebastian Dröge
0d07b52760
audio: Add audio decoder/encoder base classes
...
Taken from http://cgit.collabora.com/git/user/manauw/gst-plugins-bad.git/log/?h=baseaudio
2011-08-15 12:56:00 +02:00
Sebastian Dröge
b673e37546
basevideoencoder: Proxy the width/height/framerate/PAR constraints of downstream caps to upstream
...
This allows to specify constraints on the compressed downstream caps
by muxers or capsfilters, which will then be forwarded to upstream
and allows video converters to fulfill the constraints.
Code based on Mark Nauwelaerts audio encoder base class.
2011-08-12 12:30:07 +02:00
Sebastian Dröge
9ea8ecc191
basevideoencoder: Remove old ::getcaps() comment
2011-08-12 12:30:07 +02:00
Sebastian Dröge
f91a4e53db
basevideoencoder: Remove ::get_caps() vfunc
...
Subclasses can set the caps more efficiently and this only
caused additional indirections.
2011-08-12 12:30:07 +02:00
Sebastian Dröge
75c843670f
omxvideoenc: Use "video/x-raw-yuv" as sink template caps instead of strict I420 caps
2011-08-10 10:24:48 +02:00
Sebastian Dröge
274b3b3526
omxmpeg4videodec: Don't require width/height on sink pad caps
2011-08-10 10:23:39 +02:00
Sebastian Dröge
7a09447406
omxvideodec: Use "video/x-raw-yuv" as src template caps instead of strict I420 caps
2011-08-10 10:21:15 +02:00
Sebastian Dröge
8e422b7cc2
omxvideoenc: Set the state back to StateLoaded even if an error happened
2011-08-10 09:56:30 +02:00
Sebastian Dröge
9dcaf5c2bb
omx: Don't hold any locks while calling OMX_SendCommand()
...
It might call into one of the callbacks and lead to deadlocks, e.g.
with the Qualcomm OMX implementation.
2011-08-10 09:49:57 +02:00