Commit graph

7949 commits

Author SHA1 Message Date
Sebastian Dröge
e31922913f Automatic update of common submodule
From 44ecce7 to 7aa65b5
2010-03-09 21:32:47 +00:00
Sebastian Dröge
42ff597f41 videobox: Fix autocropping for odd width/height differences 2010-03-09 21:03:18 +00:00
Sebastian Dröge
1819fcb4a5 videobox: Use libgstvideo for format specific stuff 2010-03-09 21:03:18 +00:00
Sebastian Dröge
79e720052a audiofx: Sync properties to the stream time 2010-03-09 21:03:18 +00:00
Sebastian Dröge
4381b9296f videobox: Make properties controllable 2010-03-09 21:03:18 +00:00
Sebastian Dröge
7dcb294b54 videobox: Some cleanup 2010-03-09 21:03:18 +00:00
Sebastian Dröge
f8b7308c21 effectv: Use controller where possible, optimize a bit and make properties threadsafe 2010-03-09 21:03:18 +00:00
Sebastian Dröge
ca6566ea66 build: Make some more rules silent if requested 2010-03-09 21:03:18 +00:00
Sebastian Dröge
3e2e82afef configure: Use automake 1.11 silent rules instead of shave if available
This makes sure that we use something that is still maintained and
also brings back libtool 1.5 support.
2010-03-09 21:03:18 +00:00
Benjamin Otte
2a5f368bc7 png: fractions don't allow doubles 2010-03-09 19:15:07 +01:00
Benjamin Otte
b5a3b9cb1c flx: fix description
It's video, not audio
2010-03-09 19:15:07 +01:00
Tim-Philipp Müller
5d07a2c88f Back to development 2010-03-09 17:45:27 +00:00
Tim-Philipp Müller
e39295317b Release 0.10.21 2010-03-09 00:28:16 +00:00
Tim-Philipp Müller
e75942876b Update .po files 2010-03-09 00:24:45 +00:00
Tim-Philipp Müller
8127670c86 Revert "Add 4:2:2, 4:1:1, and 4:4:4 output support"
This reverts commit 637c26f61a.
2010-03-09 00:09:34 +00:00
Tim-Philipp Müller
01b6861527 Release 0.10.20 2010-03-08 23:42:51 +00:00
Tim-Philipp Müller
e83ecaa368 Update .po files 2010-03-08 23:42:06 +00:00
Tim-Philipp Müller
de56a874ae flacdec: don't send second newsegment event in framed mode, fixes long playback delay
Don't send another newsegment event if the upstream muxer/parser has already
sent one (otherwise the sink will wait for $duration before starting playback).
Fixes long delay until playback starts with flac-in-ogg files.

Fixes #610959.
2010-03-08 17:10:31 +00:00
Wim Taymans
66709a7a68 rtspsrc: configure multicast correctly
Take the transport destination for multicast.
Disable loop and autojoin for multicast on the udpsinks.
2010-03-08 17:48:46 +01:00
Wim Taymans
83a0c73dc0 multicast: always configure loop and ttl
Also configure TTL and loop parameters when we add a client after initializing
the sender.
2010-03-08 17:48:37 +01:00
Wim Taymans
cabe01ef95 Revert "rtph263depay: baseclass handles timestamps for us"
This reverts commit 564581e1b8.

If we don't call push_ts, there will be no timestamp at all on the outgoing
buffer.

Fixes #612154
2010-03-08 17:48:27 +01:00
Benjamin M. Schwartz
637c26f61a Add 4:2:2, 4:1:1, and 4:4:4 output support 2010-03-08 17:48:11 +01:00
Wim Taymans
529f443a61 rtpsource: use payload size to estimate bitrate
Use the length of the payload for estimating the receiver bitrate so that it
matches the calculations done on the sender side. Together with the number of
packets one can scale the bitrate with the header overhead of the lower
transport.
2010-03-08 17:48:04 +01:00
Wim Taymans
c971d1a9ab rtpsource: refactor bitrate estimation
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
2010-03-08 17:48:00 +01:00
Tristan Matthews
a0a6d4ff3b added bitrate estimation to receiver-side stats, fixes #611213 2010-03-08 17:47:55 +01:00
Wim Taymans
968c981e74 h263pay: fix typo in debug 2010-03-08 17:47:14 +01:00
Tim-Philipp Müller
4379378239 Release 0.10.19 2010-03-06 00:43:03 +00:00
Tim-Philipp Müller
bcad939757 Update .po files 2010-03-06 00:42:09 +00:00
Tim-Philipp Müller
552d6b703d 0.18.4 pre-release 2010-03-03 20:29:30 +00:00
Edward Hervey
869ff4263f matroskademux: Make sure we don't send invalid newsegments
Fixes #611501
2010-03-02 21:20:45 +01:00
Edward Hervey
be186bd089 matroskademux: Mark streams as being EOS at the right time.
This allows us to stop streaming only when all streams have gone past the
segment.stop and not before.

Fixes #611501
2010-03-02 21:20:31 +01:00
Sebastian Dröge
ad71d43f52 matroskademux: Advance sparse streams only as much as required to keep the gap smaller than 500ms
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.

Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
2010-02-27 12:20:06 +01:00
Tim-Philipp Müller
ec642338e3 0.10.18.3 pre-release 2010-02-24 21:31:00 +00:00
Alessandro Decina
49b2a94644 Make sure FLUSH_STOP is sent so not to leave downstream flushing. 2010-02-24 02:05:49 +01:00
Volker Grabsch
673459c711 configure: Use $PKG_CONFIG instead of pkg-config to fix cross compilation
Fixes bug #610839.
2010-02-23 17:25:54 +01:00
Sebastian Dröge
bcd06ea527 rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer
...not only when going to READY. This sets high_level and friends to
a more useful value.
2010-02-23 17:24:03 +01:00
Sebastian Dröge
0a12e69024 rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero 2010-02-23 17:20:02 +01:00
Wim Taymans
3a09d334a0 rtpmp4gdepay: avoid division by 0
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.

Fixes #610265
2010-02-23 12:58:03 +01:00
Wim Taymans
e43839eae9 dvdepay: don't output frames until we have a header
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.

Fixes #610556
2010-02-23 12:54:36 +01:00
David Hoyt
ad05705afb jpegdec: Fix invalid memory access by first checking and then reading
Fixes bug #610483.
2010-02-22 20:55:29 +01:00
Philippe Normand
3ab666762f pulsesink: gst_pulsesink_get_mute: set result earlier.
In the cases where no buffer was process yet or the index is not
available, get_pulsesink_get_mute() would unconditionally return
FALSE.

https://bugzilla.gnome.org/show_bug.cgi?id=610337
2010-02-22 20:49:03 +01:00
Tim-Philipp Müller
6aade594ac pkgconfig: fix gstreamer-plugins-good uninstalled .pc file
Fix gst-plugins-base reference/requirement. This caused spurious
problems with uninstalled -ugly/-bad not finding -good plugins in
their unit tests (when distchecking).
2010-02-19 12:35:29 +00:00
Tim-Philipp Müller
56a8c9143c 0.10.18.2 pre-release 2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
27569e53e8 Make git ignore shapewipe examples and tests 2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
8c46cce875 flvdemux: minor micro-optimisation
We know these values don't change during the loop, but the compiler
doesn't and has to re-check them for every iteration.
2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
ec9add84a8 flvdemux: remove static keyword from variables that shouldn't be static
Multiple flvparse/flvdemux instances should be able to operate without
trampling over each other by accidentally re-using the same (static)
variables. (Spotted by Mark Nauwelaerts)
2010-02-19 12:13:07 +00:00
Tim-Philipp Müller
07fa73f199 docs: add Since: markers for new jitterbuffer properties 2010-02-19 12:13:07 +00:00
Robert Swain
8d801f41d8 qtdemux: Fix off-by-one logic error in frame rate cap regression commit 2010-02-18 18:20:24 +01:00
Thiago Santos
f1c61e1d84 qtdemux: Use the correct duration when comparing segments
Do not confuse QtDemuxSegments with GstSegments when
comparing the total file duration with the segment duration

Fixes #610296
2010-02-18 07:53:34 -03:00
Robert Swain
2723de585e qtdemux: add durations modulo 1<<32
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.

Fixes #610280
2010-02-17 18:06:29 +01:00