flacdec converts the src timestamp to a sample number, uses that internally, then reconverts the sample number to a timestamp for the output buffer. Unfortunately, sample numbers can't be represented in an integer number of nanoseconds, and the conversion process was truncating rather than rounding, resulting in sample numbers and output timestamps that were often off by a full sample.
This corrects the time->sample convesion
There's no use in splitting the incoming data down to the segsize
limit - by writing as much as possible in one chunk, we increase
performance and avoid PulseAudio unnecessary rewinds.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The libFLAC API is callback based, and we must only call it to
output data when we know we have enough input data. For this
reason, a single processing step is done when receiving a buffer.
However, if there were metadata buffers still pending, a step
intended for the first audio frame might end up writing that
leftover metadata. Since a single step is done per buffer, this
will cause every buffer to be written one step late.
This would add some latency (a bufferfull's worth), possibly
lose a buffer when seeking or the like, and also cause timestamp
and offset to be applied to the wrong buffer, as updates to
the "current" segment last_stop (from incoming buffer timestamp)
will be applied to an output buffer originating from the previous
incoming buffer.
This fixes the issue by ensuring that, upon receiving the first
audio frame, processing is done till all metadata is processed,
so the next "single step" done will be for the audio frame. After
this, we should keep to 1 input buffer -> 1 output buffer and so
avoid getting out of sync.
https://bugzilla.gnome.org/show_bug.cgi?id=650960
Sine the base class now does the negotiation from the streaming thread we have
to be careful and check if the stream is ready before changing its corked state.
This adds support for various compressed formats (AC3, E-AC3, DTS and
MP3) payloaded in IEC 61937 format (used for transmission over S/PDIF,
HDMI and Bluetooth).
The acceptcaps() function allows bins to probe for what formats the sink
being connected to support. This only works after the element is set to
at least READY.
If the underlying sink changes and the format we are streaming is not
available, we emit a message that will allow upstream elements/bins to
block and renegotiate a new format.
This exposes the source output index of the record stream that we open
so that clients can use this with the introspection if they want (to
move the stream, for example).
Since commit 8bfd80, gst_pulseringbuffer_stop doesn't wait for the
deferred call to be run before returning. This causes a race when
READY->NULL is executed shortly after, which stops the mainloop. This
leaks the element reference which is passed as userdata for the callback
(introduced in commit 7cf996, bug #614765).
The correct fix is to wait in READY->NULL for all outstanding calls to
be fired (since libpulse doesn't provide a DestroyNotify for the
userdata). We get rid of the reference passing from 7cf996 altogether,
since finalization from the callback would anyways lead to a deadlock.
Re-fixes bug #614765.
So that pulsesrc/pulsesink get chosen over other possible PRIMARY
src/sinks by autoaudiosink. Presumably, if pulse is available, it
is always preferred over another src/sink.
Fixes: #647540.
For some reason, in code dating to 2001, encoded jpeg buffers were
rounded up to multiples of 4 bytes. With the added bonus that the
extra bytes are unwritten, causing valgrind issues. Oops. I can't
think of any reason why JPEG buffers need to be multiples of 4 bytes,
so I removed the padding. There might be some code somewhere that
depends on this behavior, so if this needs to be reverted, please fix
the valgrind issues.
This drops support fof PulseAudio versions prior to 0.9.16, which was
released about 1.5 years ago. Testing with very old versions is not
feasible and we don't want to maintain 2 independent code-paths.
Not doing so will cause buffers to be received by downstream without
a time base set.
We use the same method avimux uses to get access to the event when
collectpads got the sink event function.
https://bugzilla.gnome.org/show_bug.cgi?id=640323
Don't use g_assert() for error handling, even if they're highly unlikely.
Either we *know* that something can't happen, in which case we
should just not handle it, or we think something can happen, but it is
very very unlikely that it will ever happen, in which case we should
handle it like any other error instead of asserting.
g_assert() is best left for conditions we have control of, like checking
internal consistency of our code, not checking return values of external
code.
Fixes a bunch of warnings when compiling with -DG_DISABLE_ASSERT:
gstrtpgsmpay.c: In function 'gst_rtp_gsm_pay_handle_buffer':
gstrtpgsmpay.c:130:17: warning: variable 'rtpgsmpay' set but not used
gstspeexenc.c: In function 'gst_speex_enc_encode':
gstspeexenc.c:904:19: warning: variable 'written' set but not used
pulsesink.c: In function 'gst_pulsesink_change_state':
pulsesink.c:2725:9: warning: variable 'res' set but not used
pulsesrc.c: In function 'gst_pulsesrc_change_state':
pulsesrc.c:1253:7: warning: variable 'e' set but not used
GCC 4.6.x spits warnings about such usage of variables. The variables in
raw1394 were marked with G_GNUC_UNUSED as this seemed omre appropriate.
The others were removed.
Instead only store them inside the flac metadata. There's
no point in storing them twice and the flac metadata is
still the official way to store image tags inside flac.
Speex has build in silence detection. If speex_encode_int returns 0,
than there is silence and sample do not need to be transmitted.
This work only if vbr=1 and dtx=1 optionas are enabled.
So if we get 0, we add GAP flag to the sample.
Pulsesink was recently changed to defer uncorking until there is data
to write. This condition will however never occur when EOS in being
rendered (since that marks the end of data). Changing to PAUSED state
while EOS is being waited on results in a hang: pausing corks the
stream, which will never be undone since there is no more data when
going back to PLAYING. If pulsesink is the clock provider, deadlock
ensues since time doesn't continue in corked state and the clock id
for EOS wait never fires.
Fixes#645961.
If we did not know how many frames to expect, then we get an unexpected
end of stream when trying to decode more frames that are there, if there
are leftover bits to pad to the next byte
Looking at the remaining bits in the bitstream after decoding a
single frame can't be used as loop condition. The remaining
bits might not give a complete frame and the speex decoder will
then output nothing but access uninitialized memory, which leads
to valgrind warnings.
Fixes bug #644669.
Allows applications to connect to the "draw" signal of
the element and do their custom drawing there.
Includes an example application demonstrating usage.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=595520
Not doing so can result in a deadlock when two threads enter
gst_pulseringbuffer_open_device at the same time, as
pa_threaded_mainloop_wait releases the mainloop lock while waiting,
allowing another thread to take it, resulting in a deadlock as two
threads waits for the lock the other is holding.
https://bugzilla.gnome.org/show_bug.cgi?id=643087
By allowing larger chunks to be sent, PulseAudio will have a
lower CPU usage. This is especially important on low-end machines,
where PulseAudio can crash if packets are coming in at a higher
rate than PulseAudio can process them.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
After starting the ringbuffer, we wait for enough data to arrive before
uncorking the stream. This will cause the pipeline to stall if we get an
EOS (or otherwise need to flush the stream) before sufficient data
becomes available. This patch makes sure that the stream is uncorked
while flushing to avoid this problem.
Fixes issue with a webkit unit test testing reverse playback of
an MP4 H.264/AAC file.
https://bugzilla.gnome.org/show_bug.cgi?id=639740
This makes the call to pa_stream_cork() during ringbuffer pause()
synchronous, which makes sure that the clock does not advance after we
take a snapshot for start_time.
https://bugzilla.gnome.org/show_bug.cgi?id=639240
Error out when we are asked to read a different size that what was configured as
the jack period size because that would mean something else is wrong.
Fixes#618409
Not only adjust buffer-time and avoid segtotal=0, but instead ensure segtotal is
atleast 2. Do same change on jacksrc. We could also check the latency and buffer
time configured by the client and adjust buffer-time so that we get to the same
number of segments.
Jack overrides user-specified latency-time with the one it gets from jack
itself. It also needs to adjust buffer-time somewhat to avoid segtotal being 0
The gst_jack_audio_client_set_active() flags the port as deactivating and uses
a GCond to wait until the jack_process_cb() has run once more and cleared the
flag. This way the client zero's the buffer. This happens if one manyally go
to PAUSED and then to READY, while leting the mainloop run inbetween.
Add a new connection mode to jacksrc and jacksink. In this new auto-force
connection mode jack will create as many ports as requested/needed in the
pipeline and will then connect as many physical ports as possible, possibly
leaving some ports unconnected.
Also get rid of some leftover g_print.
Fixes#575284.
Original commit message from CVS:
* ext/jack/gstjackaudiosink.c:
* ext/jack/gstjackaudiosrc.c:
Query port latencies for sink/src delays.
* ext/jack/gstjackbin.c:
No printf please.
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* ext/jack/gstjackaudiosink.c:
(gst_jack_audio_sink_allocate_channels):
Include the element name in the port name to avoid duplicate port names.
Original commit message from CVS:
* ext/jack/gstjackaudiosink.c: (gst_jack_audio_sink_class_init):
Work around missing bits of thread-safety on older GLibs some
more to avoid assertions when starting up multiple playbin
objects concurrently (see #512382).
Original commit message from CVS:
* ext/jack/gstjackaudiosink.c: (gst_jack_ring_buffer_open_device),
(gst_jack_ring_buffer_acquire):
Add stdlib include here too.
Original commit message from CVS:
* ext/jack/gstjackaudiosink.c: (gst_jack_ring_buffer_open_device),
(gst_jack_ring_buffer_acquire):
Try t better name clients. properly handle return codes when re-
establishing links.
Original commit message from CVS:
Based on patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_unref_connection):
Don't need to take the connection lock, it will not be used and could
cause deadlocks.
Original commit message from CVS:
Includes patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/Makefile.am:
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_client_init),
(jack_process_cb), (jack_sample_rate_cb), (jack_buffer_size_cb),
(jack_shutdown_cb), (connection_find),
(gst_jack_audio_make_connection), (gst_jack_audio_get_connection),
(gst_jack_audio_unref_connection),
(gst_jack_audio_connection_add_client),
(gst_jack_audio_connection_remove_client),
(gst_jack_audio_client_new), (gst_jack_audio_client_free),
(gst_jack_audio_client_get_client),
(gst_jack_audio_client_set_active):
* ext/jack/gstjackaudioclient.h:
Make an object to manage client connections to the jack server which we
will use in the future to run selected jack elements with the same jack
connection.
Make some stuff a bit more threadsafe.
Activate the jack client ASAP.
* ext/jack/gstjackaudiosink.c:
(gst_jack_audio_sink_allocate_channels),
(gst_jack_audio_sink_free_channels), (jack_process_cb),
(gst_jack_ring_buffer_open_device),
(gst_jack_ring_buffer_close_device),
(gst_jack_ring_buffer_acquire), (gst_jack_ring_buffer_release),
(gst_jack_audio_sink_class_init), (gst_jack_audio_sink_init),
(gst_jack_audio_sink_getcaps):
* ext/jack/gstjackaudiosink.h:
Use new client object to manage connections.
Don't remove and recreate all ports, try to reuse them.
Original commit message from CVS:
second batch :
remove ',' at end of enums as they could confuse older gcc, foreign compilers (forte) and gtk-doc
(in gst-plugins/ext/ this time)
Original commit message from CVS:
Remove all usage of gst_pad_get_caps(), and replace it with
gst_pad_get_allowed_caps() or gst_pad_get_negotiated_cap().
Original commit message from CVS:
Remove all config.h includes from header files, add it to each source file and remove duplicate config.h includes from several source files
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
New typefind system:
* bytestream is now part of the core
* all plugins have been modified to use this new typefind system
* asf typefinding added
* mpeg video stream typefiding removed because it's broken
* duplicate typefind entries removed
* extra id3 typefinding added, because we've seen 4 types of files
(riff/wav, flac, vorbis, mp3) with id3 headers and each of these needs
to work. Instead, I've added an id3 element and let it redo typefiding
after the id3 header. this needs a hack because spider only typefinds
once. We can remove this hack once spider supports multiple typefinds.
* with all this, mp3 typefinding is semi-rewritten
* id3 typefinding in flac/vorbis is removed, it's no longer needed
* fixed spider and gst-typefind to use this, too.
* Other general cleanups
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
Original commit message from CVS:
some jack fixes, alsa touchups, and add rtp by default to the build
if there are any problems building rtp, we're moving it back to experimental ;)
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
Original commit message from CVS:
Finally we're on to a proper jack setup, with a specialized bin and elements
that can only go in a jack bin. I had to fix the parser first to do this, but
to run it, the syntax is like so:
gst-launch jackbin.( filesrc ! mad ! jacksink )
But of course it's not fully functional yet. Sigh.
Original commit message from CVS:
* add notify back to filesrc, it's needed for MVC applications
* remove notify printouts from gst-launch
* cleanup in gst-plugins configure.ac
* some jack updates
* remove SELF_ITERATING flag in favor of SEF_SCHEDULABLE (not a clear name,
but it's what we have for the moment)
* improve parsing of request pad names, no more sscanf
* fixes to the fastscheduler Makefile.am
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
Original commit message from CVS:
s/@GST_PLUGIN_LDFLAGS@/$(GST_PLUGIN_LDFLAGS)/
@-substitued variables variables are defined as make variables automagically,
and this gives the user the freedom to say make GST_PLUGIN_LDFLAGS=-myflag
Original commit message from CVS:
* s/gst_element_install_std_props/gst_element_class_install_std_props/ -- it just makes more sense that way
* added jack element, doesn't quite work right yet but i didn't want to lose the work -- it does build, register,
and attempt to run though
* imposed some restrictions on the naming of request pads to better allow for reverse parsing
* added '%s' to reverse parsing
* added new bin flag to indicate that it is self-iterating, and some lame code in gst-launch to test it out
* fixen on launch-gui
* added pkg-config stuff for the editor's libs
* ext/pulse/pulsesrc.c (gst_pulsesrc_class_init, gst_pulsesrc_init)
(gst_pulsesrc_set_property, gst_pulsesrc_get_property)
(gst_pulsesrc_open): Add a "client" property, as in pulsesink.
Fixes#634914
Instead of using get_allowed_caps on the srcpad, the sinkpad getcaps
should use the getcaps of the srcpad's peer. This way the srcpad
can keep using fixed_caps and sinkpad getcaps exposes all caps
that can be negotiated
https://bugzilla.gnome.org/show_bug.cgi?id=637686
Add property to ignore decoding errors. Default is to ignore a few
decoding errors if the input is packetized, but error out immediately
if the input is not packetized.
Ignoring errors for packetized input most likely doesn't work
properly yet, so don't do that for now.
https://bugzilla.gnome.org/show_bug.cgi?id=623063
Don't uncork in the _start method just yet but wait until we have written some
samples to pulseaudio. This avoid underruns on pulseaudio and less crackling
noises when starting.
Using the symbols for the different Speex modes results
in crashes when using MSVC. Use the library functions to
get the modes instead.
Fixes bug #630378.
Make the is_dead check more clear and add an option to check for the status of
the stream in addition to the context.
We don't need a stream to get the device_description string.
Fixes#630317
We also need to share the main-loop threads as this owns the context. Thus have
a class wide main-loop thread. From this we create a context per client-name.
Instead of always looking up the context, we keep this with the instance. The
reverse mapping is only needed in pulse singal handlers. This saves a lot of
locking. Also one signal handler becomes simpler as ther eis only one mainloop
to notify.
Now valgind happy - no leaks, no bad reads/writes.
This reverts major parts of commit 69a397c32f.
Fixes#628996
Error messages should be translated. URIs and filenames should not
be part of the error message string that's shown to the user.
soup_message->reason_phrase is not translated and not suitable as
error message for users (see libsoup documentation). Also fix up
error codes a bit, as far as possible with the existing codes.
Use g_slist_prepend as we don't care about the order. Check for list == NULL
instead of iterating the list to see if it is empty. Move ctx allocation down
to prevent leak in case of failure.
Don't leak the pulsesink element by having the clock keep a ref to the sink.
Create the clock only once in the constructor and use the baseaudiosink clock
cleanup code.
And as a result, don't ignore WRONG_STATE and NOT_LINKED.
Both mean that it's a good idea to pass them upstream instead
of pretending that everything is good.
Allows the application to modify the client name used to connect when
connecting to the PulseAudio daemon. Note however that updating the
property after the element reached the READY state will have no
effect until the next NULL->READY transition.
Fixes bug #627174.
Before they contained the URL before the actual failure. The other
way around makes more sense and we do the same in other elements
like filesrc.
Fixes bug #627289.
Avoid to create a new PA context for each new client by using a hash
table containing the list of ring-buffers and the shared PA context
for each client. Doing this will improve application memory usage in
the cases where multiple pipelines involving multiple pulsesink
elements are used.
Fixes bug #624338.
If the application requests a state-change and pulsesink fails to open
the ring_buffer device the mainloop attribute of the sink should be
cleaned up to avoid future state-change (NULL->READY) failures.
The existing get_type() implementation is racy, and the
g_type_class_ref() workaround didn't actually work because
it was in the wrong function. Since class creation in GObject
is thread-safe these days (since 2.16), the class_ref workaround
is no longer needed and it is sufficient to ensure the _get_type()
function is thread-safe, which G_TYPE_DEFINE does.
https://bugzilla.gnome.org/show_bug.cgi?id=624338
