The old one did the mistake of not actually advancing the ringbuffer, it just
adjusted the segbase, introducing the whole lenght of the ringbuffer as an
extra delay in the pipeline.
Also make sure that the resync can never go back in time, producing the same
timestamps that has already been produced, as this can cause severe problems
for sinks and other synching mechanisms.
Fixes#594256
Add section docs for multichannel, so that it has a short desc in the toc too.
Move the section docs in adio up, so that the follow the copyright like
elsewhere.
Unparent and free the ringbuffer when going to NULL, like we do with the
audiosrc element. We can do this now because we correctly manage the time
jumping back to 0.
Hack around thread-safety issues in GObject and our racy _get_type()
functions (we could easily fix the _get_type() functions, but we still
need to hack around the GObject class races until we require a newer
GLib version, I think).
Use the unadjusted internal clock times to calculate the internal/external
offset when calibrating the clock.
When going to NULL, unparent and free the ringbuffer, like we do in the source
element.
See #578506
Add two methods for getting the unadjusted time of the clock and one for
adjusting an internal time. We will need these methods for correctly handling
the time after a gst_audio_clock_reset().
Add a debug category and some debug lines to the audio clock.
API: gst_audio_clock_get_time()
API: gst_audio_clock_adjust()
API: GST_AUDIO_CLOCK_CAST()
After we pause the stream and interrupt the writeout to the ringbuffer, also adjust
the amount of output samples we consumed. We can't do this reliably with the
current API when we are doing trick modes but we can do the right thing for
normal playback.
Original commit message from CVS:
Patch by: José Alburquerque <jaalburqu svn gnome org>
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_new):
* gst-libs/gst/audio/gstaudioclock.h:
Make gst_audio_clock_new use const gchar* to ease the wrapping of
C++ bindings. Fixes#566723.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_change_state):
Avoid holding the OBJECT_LOCK when calling ringbuffer functions that
take the ringbuffer lock because rinbuffer lock > OBJECT_LOCK. We can do
this because the async_play method is deprecated and usually not called
anymore.
Original commit message from CVS:
* gst-libs/gst/audio/Makefile.am:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/multichannel.h:
* gst-libs/gst/audio/testchannels.c:
* win32/MANIFEST:
* win32/common/audio-enumtypes.c:
(gst_audio_channel_position_get_type),
(gst_ring_buffer_state_get_type),
(gst_ring_buffer_seg_state_get_type),
(gst_buffer_format_type_get_type), (gst_buffer_format_get_type):
* win32/common/audio-enumtypes.h:
* win32/common/multichannel-enumtypes.c:
* win32/common/multichannel-enumtypes.h:
* win32/vs6/grammar.dsp:
* win32/vs6/libgstaudio.dsp:
* win32/vs7/libgstaudio.vcproj:
* win32/vs8/libgstaudio.vcproj:
Switch glib-mkenum for gst-libs/gst/audio from multichannel- to
audio- in order to wrap all enums declarations of that library.
This modification should not matter since that header file is not a
public header (it will be included by public headers).
Modify win32 crap^Wfiles accordingly.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.h:
* gst-libs/gst/audio/gstbaseaudiosink.h:
Complete Sebastien's commit from the 13th by exporting the
_slave_method_get_type() methods.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps):
Pause the write thread before deactivating and releasing the ringbuffer
to avoid a deadlock when we do gapless playback with different sample
rates in playbin2. Fixes#564929.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
Make GstAudioSrcSlaveMethod get_type() function non-static
as it's public now.
* win32/common/libgstaudio.def:
* win32/common/libgstnetbuffer.def:
Add some missing functions to the list of exported symbols.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_slave_method_get_type),
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosink.h:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_slave_method_get_type),
(gst_base_audio_src_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
API: Add GST_TYPE_BASE_AUDIO_(SRC|SINK)_SLAVE_METHOD to the
public API. This is needed for the C++ bindings to be able
to use this base classes. Fixes bug #564200, #564206.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_offset), (gst_base_audio_src_create):
Avoid nasty int overflows after about 12 hours and 25 minutes when these
code paths are triggered.
A free beer to Håvard Graff for finding this!
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_event),
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
Really fix audiosink drain handling by keeping track of the running_time
of the last sample.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
Time is already in running_time. Remove base_time handling. Fixes
audiosinks not draining and thus chopping some audio in the end.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
Add one log message to check for audio_drained. Sync one log message
with the condition. Send EOS after draining audio in pull mode.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_callback):
Use gst_base_sink_do_preroll() to wait for PLAYING and before waiting
for the latency to expire, fixes#559567.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_class_init), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_activate), (gst_audioringbuffer_release),
(gst_audioringbuffer_stop):
Implement a separate activate functions to start monitoring the segments
or, in pull mode, pulling in data.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_init), (gst_base_audio_sink_dispose),
(gst_base_audio_sink_query_pad), (gst_base_audio_sink_query),
(gst_base_audio_sink_setcaps), (gst_base_audio_sink_callback),
(gst_base_audio_sink_activate_pull),
(gst_base_audio_sink_async_play),
(gst_base_audio_sink_change_state):
Implement pad and element convert query function.
Activate the ringbuffer.
Use the segment last_stop value as the offset to pull.
Use new basesink _do_preroll() method to preroll in the pulling thread.
Take appropriate locking in the pulling thread.
* gst-libs/gst/audio/gstringbuffer.h:
Update some docs.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_convert),
(gst_ring_buffer_activate), (gst_ring_buffer_is_active):
* gst-libs/gst/audio/gstringbuffer.h:
Add methods to more accuratly control the pulling thread of a
ringbuffer.
Add format conversion helper code to the ringbuffer.
API: GstRingBuffer:gst_ring_buffer_activate()
API: GstRingBuffer:gst_ring_buffer_is_active()
API: GstRingBuffer:gst_ring_buffer_convert()
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_acquire), (gst_audioringbuffer_release),
(gst_audioringbuffer_stop):
Signal thread startup earlier so that we can immediatly go into pull
mode when we have to and block on preroll.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read):
In pull mode we want the callback to prepull a buffer we can preroll on
even when we are not yet playing.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Fix debug statements (space between '%' and actual format).
Original commit message from CVS:
* gst-libs/gst/audio/audio.h: (GST_AUDIO_FIELD_SIGNED):
Remove trailing comma from enum list, which causes problems
with -pendantic (#550729).
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audioringbuffer_stop):
Disable a code path that is now called but causes a deadlock for some
reason and is unneeded.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_stop):
Since we now call stop, we trigger this code path that causes a deadlock
is apparently not needed.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_stop):
Also allow the case where the ringbuffer was paused when we try to stop
it so that the basesrc stop function is still called.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
When not slaved to another clock also subtract the base_time from our
internal clock time to get the running time.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstaudiosrc.h:
More docs and shuffling. What can we do with the hundreds of #defines.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
* gst-libs/gst/audio/gstaudiofilter.h:
* gst-libs/gst/audio/gstringbuffer.h:
* gst-libs/gst/interfaces/propertyprobe.h:
* gst-libs/gst/tag/gsttagdemux.h:
Reducing number of dundocumented symbols.
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
Fix doc comment syntax.
* gst-libs/gst/interfaces/propertyprobe.c:
Add more doc-comments and a FIXME: for the signal.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query), (gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_render):
Report latency even if we are not live instead of hiding it.
Take ts-offset and render-delay of the basesink into account when
scheduling samples.
Rework the clipping code so that we can take the various offsets into
account and still do correct clipping.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
* gst-libs/gst/audio/multichannel.h:
API: Make gst_audio_check_channel_positions() public.
* tests/check/libs/audio.c: (GST_START_TEST):
Add some simple checks for gst_audio_check_channel_positions().
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
Add a gtk-doc chunk for the new properties to have a Since: indication.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_dispose),
(gst_base_audio_src_get_property), (gst_base_audio_src_setcaps),
(gst_base_audio_src_change_state):
Provide readable actual-buffer-time and actual-latency-time properties
that reflect the configured ringbuffer values. Fixes#524724.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Allow rear center together with rear left/right and other previously
conflicting channel positions. The reason why they weren't allowed
was the channel mixing implementation in audioconvert.
Also take this into account when fixing channel layouts.
Allow setting channel positions for 1/2 channels when using
gst_audio_set_structure_channel_position().
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_compatible), (gst_channel_mix_detect_pos),
(gst_channel_mix_fill_one_other), (gst_channel_mix_fill_others),
(gst_channel_mix_fill_special), (gst_channel_mix_fill_matrix):
Major rewrite of the channel mixing.
We now allow previously conflicting channel positions to appear
together (rear center and rear left/right for example).
Fixes bug #533817.
Rework the way channels are mixed together to take more possible
channel positions into account, properly mix from/to side channels
and don't assume that either center, left&right or nothing of a
specific position is available anymore.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Adjust unit tests with non-standard 1/2 channel layouts to the more
correct new behaviour.
Add a unit test for 5.1->Stereo downmixing.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_init),
(gst_audio_clock_reset), (gst_audio_clock_get_internal_time):
* gst-libs/gst/audio/gstaudioclock.h:
Add method to inform the clock that the time starts from 0 again. We use
this info to calculate a clock offset so that the time we report in
internal_time is monotonically increasing, as required by the clock base
class. Fixes#521761.
API: GstAudioClock::gst_audio_clock_reset()
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_change_state):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Reset reported time when we (re)create the ringbuffer.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
Allow non-standard 2 channel layouts.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some tests for converting and remapping non-standard 1 and 2
channel layouts.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_sync_latency):
We can only use our optimal calibration if we prerolled before the
latency expired.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c: (gst_gnome_vfs_src_init),
(gst_gnome_vfs_src_finalize),
(gst_gnome_vfs_src_received_headers_callback),
(gst_gnome_vfs_src_create), (gst_gnome_vfs_src_stop):
* ext/gnomevfs/gstgnomevfssrc.h:
Set the ICY caps on the srcpad from where they get picked up by the base
class now and set on the outgoing buffers.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
* sys/v4l/v4lsrc_calls.c: (gst_v4lsrc_buffer_new):
BaseSrc now sets the caps on outgoing buffers automatically.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play),
(gst_base_audio_sink_change_state):
Change the way in which the ringbuffer is started when dealing with a
slaved clock and latency. We now sync to the clock until we reach
upstream latency before starting the ringbuffer. This has the effect
that we can accurately align the master and slave clocks and let the
rate correction code take care of the initial drift or rounding errors
instead of leaving them uncorrected with the old approach.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render), (gst_base_audio_sink_async_play):
Revert previous patch that attempted to more accurately calculate the
initial offset between master and slave clock. The best thing we can do
in general is take the time of both clocks as the diff since we don't
know when the actual preroll happened.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_acquire):
Choose to allocate one less segment but require one additional segment
as latency.
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audioringbuffer_acquire):
No need to increment the number of segments in the source.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (clock_convert_external),
(gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_none_slaving), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play):
Remove adding latency when returning the internal time while subtracting
it again when we use the value a little later.
When calculating the end timestamp, we are making a rounding error
with the current algorithm. Ensure that we don't accumulate these
rounding errors when aligning samples by not resampling at all if we
don't need to. Fixes#419351.
Make the initial calibration of the clock slaving a little more
predictable and accurate. Also handle the case where we don't do
clock slaving.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query):
Report the latency with the new seglatency parameter.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_debug_spec_buff), (gst_ring_buffer_parse_caps),
(gst_ring_buffer_acquire):
* gst-libs/gst/audio/gstringbuffer.h:
Add new field to the ringbufferspec to specify the expected latency
between the underlying device read/write pointer, this is needed
when writing sinks that sit a little closer to the hardware.
Add some more docs for other fields.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.h:
Clarify some docs.
* gst-libs/gst/audio/gstbaseaudiosrc.c: (slave_method_get_type),
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_set_slave_method),
(gst_base_audio_src_get_slave_method),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Add property and methods for selecting the clock slave method in the
source, like in the sink.
We only implement "none" and "re-timestamp" for now.
API: gst_base_audio_src_set_slave_method()
API: gst_base_audio_src_get_slave_method()
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_may_start):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
* gst/playback/gstplayback.c: (plugin_init):
* gst/volume/gstvolume.c: (plugin_init):
Work around missing bits of thread-safety on older GLibs some
more to avoid assertions when starting up multiple playbin
objects concurrently (see #512382).
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving), (gst_base_audio_sink_render):
Guard against over and underflows because of clock slaving.
When we are using our own clock, still compensate for any calibrations
that we might have done to our clock.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_release):
Small debug improvement.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Fix bug in determining the sample start/stop position, we want to base
this decision on the fact that we are going forwards or backwards, not
slower or faster. This fixes some ugly resync warnings when playing at
very slow speeds.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h:
Rename recently added buffer types to make more sense.
* ext/alsa/gstalsasink.c: (alsasink_parse_spec),
(gst_alsasink_write):
Adapt for above API changes.
Fixes bug #520523.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Fix duration when no clock was provided. Fixes#520300.
Original commit message from CVS:
2008-02-29 Julien Moutte <julien@fluendo.com>
* ext/alsa/gstalsa.c: (gst_alsa_open_iec958_pcm),
(gst_alsa_probe_supported_formats): Probe for IEC958 pcm to
detect
if we can do SPDIF output.
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (set_hwparams), (alsasink_parse_spec),
(gst_alsasink_prepare), (gst_alsasink_close),
(gst_alsasink_write):
* ext/alsa/gstalsasink.h: Initial support for SPDIF.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h: Add non linear buffer
types
to support AC3, EC3 and IEC958 buffers.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(GST_AUDIO_CHANNEL_POSITIONS_FIELD_NAME),
(gst_audio_get_channel_positions), (gst_audio_set_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(add_list_to_struct), (gst_audio_set_caps_channel_positions_list),
(gst_audio_fixate_channel_positions):
Fix confusing terminology in docs and code: structure fields are
'fields' and not 'properties'.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions), (add_list_to_struct):
Give more useful warning messages if one of the channel
layout enums passed to us is invalid and if the "channels"
field in the caps has a GType we don't expect.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c:
(gst_audio_filter_class_init):
Initialize the GstRingerBuffer class to get it's debug category
initialized. gst_ring_buffer_parse_caps() uses the ringbuffer debug
category and otherwise we get some g_critical(). Fixes bug #512334.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
Ref audio clock class from a thread-safe context to make sure
we're not bit by GObjects lack of thread-safety here (#349410),
however unlikely that may be in practice.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audio_filter_get_type):
Don't set element details for the abstract GstAudioFilter class.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c:
(gst_audio_filter_class_init), (gst_audio_filter_get_unit_size):
Implement get_unit_size() vmethod of GstBaseTransform.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_open_device),
(gst_audioringbuffer_close_device), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release), (gst_audioringbuffer_start),
(gst_audioringbuffer_pause), (gst_audioringbuffer_stop),
(gst_audio_sink_create_ringbuffer):
Improve debug output.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_pause), (gst_ring_buffer_delay):
Prevent some functions from doing things and failing when the
ringbuffer is not yet acquired.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Add debug info.
When going from PLAYING to PAUSED, pause the ringbuffer before calling
the parent state change function, just like the audiosink, because the
parent waits for the element to finish its processing before completing
the state change. This makes going to PAUSED a lot snappier.
When going from READY to PAUSED, don't allow the ringbuffer to start
yet.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain):
Our EOS time contains the base_time, _wait_eos() expects a running_time
so we have to subtract the base_time again before calling the function.
This fixes an EOS regression where the base_time was added twice and EOS
took longer and longer in certain situations.
Fixes#498767.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstbaseaudiosink.c: (slave_method_get_type),
(gst_base_audio_sink_set_provide_clock),
(gst_base_audio_sink_get_provide_clock),
(gst_base_audio_sink_set_slave_method),
(gst_base_audio_sink_get_slave_method),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_drain),
(gst_base_audio_sink_none_slaving),
(gst_base_audio_sink_handle_slaving):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Expose methods for some object properties so that subclasses can more
easily configure them.
Added slave method none, that completely disables slaving to the
internal clock.
API: gst_base_audio_sink_set_provide_clock()
API: gst_base_audio_sink_get_provide_clock()
API: gst_base_audio_sink_set_slave_method()
API: gst_base_audio_sink_get_slave_method()
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_set_provide_clock),
(gst_base_audio_src_get_provide_clock),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Expose methods for some object properties so that subclasses can more
easily configure them.
API: gst_base_audio_src_set_provide_clock()
API: gst_base_audio_src_get_provide_clock()
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_parse_caps):
Return NULL instead of an enum that happens to be 0, fixes warning
on MSVC (#492114).
* gst-libs/gst/audio/gstringbuffer.h:
No trailing commas in enum list (for gcc-2.9x).
* gst/videotestsrc/videotestsrc.c: (random_char):
Make information loss explicit instead of implicitly truncating to
eight bits via the return value. Fixes runtime error on MSVC when
using the debug CRT (#492114).
* win32/common/config.h.in:
Fix a bunch of '#undef FOO bar', which MSVC doesn't like (#492114).
* win32/common/libgstinterfaces.def:
* win32/common/libgstrtp.def:
Export a few more symbols (#492114).
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/audio.h:
Readd the deprecation guards, but preserve compilability.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
Don't guard deprecated enum with #ifndef DISABLE_DEPRECATED, or
compilation with DISABLE_DEPRECATED and without REMOVE_DEPRECATED
(ie. normal cvs builds) will fail.
Original commit message from CVS:
* docs/libs/Makefile.am:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/audio.h:
* gst-libs/gst/interfaces/mixer.c:
tell gtk-doc about the deprecation guard. Apply more doc fixes.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstaudiofilter.h:
* gst-libs/gst/interfaces/mixer.h:
* gst-libs/gst/rtp/gstbasertpdepayload.c:
* gst-libs/gst/rtp/gstbasertpdepayload.h:
* gst-libs/gst/sdp/gstsdpmessage.c:
Fix the docs according to what gtk-doc complained about.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_change_state):
Also explicitly release the ringbuffer when going to NULL because it
is required in the setcaps function, before the state change to PAUSED
completes.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain):
Use new basesink method to make our EOS drain interruptable.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Also handle the case where there is no clock set on the audio source,
like in the unit tests.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_async_play):
When slaved to the clock, don't try to align a sample with the previous
one when going to PLAYING again.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_set_property):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/rtp/gstrtcpbuffer.c: (gst_rtcp_ntp_to_unix),
(gst_rtcp_unix_to_ntp):
* gst-libs/gst/rtsp/gstrtspmessage.c: (gst_rtsp_message_get_type):
* gst/playback/gstqueue2.c:
* tests/examples/seek/seek.c: (set_scale):
Fix a bunch of compile warnings shown with Forte.
* gst/audiorate/gstaudiorate.c:
Always pull in config.h before including any system headers.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_init):
Disable pull mode scheduling, we're not ready for it yet and it subtly
breaks a lot of things.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_provide_clock),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Allow othe clocks than the internal clock to be used for the pipeline.
Add property to disable clock provide.
API: GstBaseAudioSrc::provide-clock
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
When skew slaving, try to hover around the middle of a segment so that
we at most drift by half a segment.
If we are aligning in the oposite direction of the clock skew, we don't
have to resync.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
Use gst_util_uint64_scale() instead of doing the math
with double for GST_FRAMES_TO_CLOCK_TIME() and
GST_CLOCK_TIME_TO_FRAMES(). For large timestamps this
prevents rounding errors. Fixes#467667.
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
When clipping a buffer with no timestamp, assume it is
within the segment without warnings.
Fixes: #460978
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/audio.c: (gst_audio_buffer_clip):
* gst-libs/gst/audio/audio.h:
* tests/check/libs/audio.c: (GST_START_TEST), (audio_suite):
API: Add buffer clipping function for raw audio buffers. Fixes#456656.
Also add deprecation guards for gst_audio_structure_set_int() to the
header.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_callback):
Quick hack to make audiosinks stop at EOS when operating in
pull-mode; needs to be fixed properly some day.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_init): Enable pull-mode operation.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
After an interrupt (PAUSED/flush) assume that the next sample should not
be aligned to the previous sample. Fixes#417992.
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (_do_init),
(gst_base_audio_src_create):
* po/POTFILES.in:
When posting a warning message because samples were dropped, post
something more intelligible than he default error message for clock
errors which is just confusing in this context (#432984).
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving):
Don't try to create invalid calibration parameters by making the
internal time go backwards, instead make external time go forward.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c: (slave_method_get_type),
(gst_base_audio_sink_class_init), (gst_base_audio_sink_init),
(gst_base_audio_sink_query), (gst_base_audio_sink_get_time),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_event),
(clock_convert_external), (gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_handle_slaving), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Store private stuff in GstBaseAudioSinkPrivate.
Add configurable clock slaving modes property.
API:: GstBaseAudioSink::slave-method property
Some more latency reporting tweaks.
Added skew based clock slaving correction and make it the default until
the resampling method is more robust.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:(gst_base_audio_sink_render):
Use gst_guint64_to_gdouble for conversion.
* win32/MANIFEST:
Add new files to the win32 MANIFEST.
* win32/common/libgstaudio.def:
* win32/common/libgstpbutils.def:
Add new exported functions.
* win32/vs6/gst_plugins_base.dsw:
* win32/vs6/libgstdecodebin.dsp:
* win32/vs6/libgstplaybin.dsp:
Change the link to libgstpbutils.lib.
* win32/vs6/libgstdecodebin2.dsp:
Add a new project for decodebin2.
* win32/vs6/libgstpbutils.dsp:
Add a new project for pbutils.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_async_play):
Fix regression that made GStreamer skip the first samples of audio.
Fixes#414684.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func):
* gst-libs/gst/audio/gstaudiosrc.c: (audioringbuffer_thread_func):
Improve debugging.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query), (gst_base_audio_sink_event),
(gst_base_audio_sink_render), (gst_base_audio_sink_async_play):
Improve latency and clock slaving calculations.
Improve slave clock calibration.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full):
When we are asked to render N sample to 0 bytes, return N.
