Original commit message from CVS:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
Added some documentation about security handling
start implementing security handling for rfb 3.3
Original commit message from CVS:
* ChangeLog:
Add missing newline.
* gst/librfb/rfbdecoder.c:
Fix the build (missing stdlib.h).
* gst/spectrum/gstspectrum.c:
* gst/spectrum/gstspectrum.h:
Use basetransform segment so that it is correctly managed on flushes
and start/stop. Report message timestamp as stream time, which is what
an application can understand. (Yes these are adapted from wim recent
level element changes)
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (calc_ntp_ns_base),
(gst_rtp_bin_change_state), (new_payload_found), (create_send_rtp):
Calculate and configure the NTP base time so that we can generate better
NTP times in SR packets.
Set caps on new ghostpad.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Clean debug statement.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_internal_links), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Add ntp-ns-base property to convert running_time to NTP time.
Handle NEWSEGMENT events on send and recv RTP pads so that we can
calculate the running time and thus NTP time of the packets.
Simplify getting the current NTP time using the pipeline clock.
Implement internal links functions.
Use the buffer timestamp to calculate the NTP time instead of the clock.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_chain), (gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links),
(gst_rtp_ssrc_demux_src_query):
* gst/rtpmanager/gstrtpssrcdemux.h:
Implement internal links function.
Calculate the diff between different streams, this might be used later
to get the inter stream latency.
* gst/rtpmanager/rtpsession.c: (rtp_session_send_rtp):
Simple cleanup.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp), (rtp_source_get_new_sr):
Make the clock skew window a little bigger.
Apply the clock skew to all buffers, not just one with a new timestamp.
Calculate and debug sender clock drift.
Use extended last timestamp to interpollate for SR reports.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_start),
(gst_spectrum_transform_ip):
Use the correct parameter order for the memset calls.
Thanks to Christian Schaller for noticing.
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
Original commit message from CVS:
* gst/real/gstrealvideodec.c: (gst_real_video_dec_chain),
(gst_real_video_dec_setcaps):
Add some more debugging.
Don't set LONG for width/height in caps.
Set correct output buffer size when caps changed.
The custom message sent to the decoder should not include the format and
subformat. Fixes#471554.
Original commit message from CVS:
2007-09-03 Johan Dahlin <johan@gnome.org>
* gst/nsf/gstnsf.c: (gst_nsfdec_finalize), (start_play_tune):
* gst/nsf/gstnsf.h:
Add support for (very) basic tagging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_client),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain), (create_stream),
(gst_rtp_bin_init), (caps_changed), (new_ssrc_pad_found),
(create_recv_rtp), (create_recv_rtcp), (create_send_rtp):
* gst/rtpmanager/gstrtpbin.h:
Updated example pipelines in docs.
Handle sync_rtcp buffers from the SSRC demuxer to perform lip-sync.
Set the default latency correctly.
Add some more points where we can get caps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Add ts-offset property to control timestamping.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_send_rtcp), (gst_rtp_session_sync_rtcp),
(gst_rtp_session_cache_caps), (gst_rtp_session_clock_rate),
(gst_rtp_session_sink_setcaps), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Various cleanups.
Feed rtpsession manager with NTP time based on pipeline clock when
handling RTP packets and RTCP timeouts.
Perform all RTCP with the system clock.
Set caps on RTCP outgoing buffers.
* gst/rtpmanager/gstrtpssrcdemux.c: (find_demux_pad_for_ssrc),
(create_demux_pad_for_ssrc), (gst_rtp_ssrc_demux_base_init),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain):
* gst/rtpmanager/gstrtpssrcdemux.h:
Also demux RTCP messages.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rb), (rtp_session_process_sr),
(rtp_session_process_rr), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_send_bye),
(session_start_rtcp), (session_report_blocks), (session_cleanup),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Remove the get_time callback, the GStreamer part will feed us with
enough timing information.
Split sync timing and RTCP timing information.
Factor out common RB handling for SR and RR.
Send out SR RTCP packets for lip-sync.
Move SR and RR packet info generation to the source.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp),
(rtp_source_process_sr), (rtp_source_process_rb),
(rtp_source_get_new_sr), (rtp_source_get_new_rb),
(rtp_source_get_last_sr):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Use caps on incomming buffers to get timing information when they are
there.
Calculate clock scew of the receiver compared to the sender and adjust
the rtp timestamps.
Calculate the round trip in sources.
Do SR and RR calculations in the source.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop):
Use extended timestamp to release buffers from the jitterbuffer so that
we can handle the rtp wraparound correctly.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Improve Comments.
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state), (gst_rtp_session_parse_caps),
(gst_rtp_session_clock_rate), (gst_rtp_session_sink_setcaps),
(gst_rtp_session_event_send_rtp_sink), (create_recv_rtp_sink),
(create_send_rtp_sink):
Also parse the sink caps for clock-rate instead of only relying on the
result of the signal.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Make sure we fetch the clock rate for payloads we are sending out so
that we can use it for SR reports.
Original commit message from CVS:
* gst/switch/gstswitch.c (gst_switch_chain, gst_switch_set_property):
If all information is known at time of setting start-time
property, send new segments then.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state),
(gst_rtp_session_event_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Distribute synchronisation parameters to the session manager so that it
can generate correct SR packets for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_base_time),
(rtp_session_set_timestamp_sync), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Add methods for setting sync parameters.
Set correct RTP time in SR packets using the sync params.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Record last RTP <-> GST timestamp so that we can use them to convert NTP
to RTP timestamps in SR packets.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_clear_pt_map):
Add some more advanced example pipelines.
* gst/rtpmanager/gstrtpsession.c: (rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_send_rtcp):
Add some debug and FIXME.
Release LOCK when performing session cleanup.
* gst/rtpmanager/rtpsession.c: (session_report_blocks):
Add some debug.
* gst/rtpmanager/rtpsource.c: (calculate_jitter),
(rtp_source_send_rtp):
Make sure we always send RTP packets with the session SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query):
When synchronizing buffers, take peer latency into account.
Don't try to add our latency to invalid peer max latency values.
Original commit message from CVS:
2007-08-27 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_handle_seek_pull):
Make sure we initialize the seek result.
Original commit message from CVS:
* examples/switch/switcher.c (main):
* gst/switch/gstswitch.c (gst_switch_chain):
Make switch more reliable and also not lock up when
sink pad caps change.
Original commit message from CVS:
* gst/mpegtsparse/flutspatinfo.c:
* gst/mpegtsparse/flutspatinfo.h:
* gst/mpegtsparse/flutspmtinfo.c:
* gst/mpegtsparse/flutspmtinfo.h:
Update licences to reflect LGPL-ness of these files also.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.signals:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpclient.h:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpptdemux.h:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpsession.h:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/rtpmanager/gstrtpssrcdemux.h:
Rename all GstRTPFoo structs to GstRtpFoo so that GST_BOILERPLATE
registers a GType that's different than the GstRTPFoo types that
farsight registers (luckily GType names are case sensitive). Should
finally fix#430664.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin wh9 net>
* configure.ac:
* gst/festival/Makefile.am:
* gst/festival/gstfestival.c:
Port festival plugin to GStreamer-0.10 (#461377).
Original commit message from CVS:
2007-08-22 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_pull_tag):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_metadata_item),
(gst_flv_parse_tag_script), (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): Handle pixel aspect ratio through
metadata tags like ASF does. Fluendo muxer supports this and
Flash players can support it as well this way.
Original commit message from CVS:
2007-08-22 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_pull_tag):
* gst/flv/gstflvparse.c: (gst_flv_parse_metadata_item),
(gst_flv_parse_tag_script), (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): Make sure we don't try filling up the
index if no times object was parsed. Fix the way we decide to
push
tags and emit no-more-pads. Fix some printf typing in debugging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_set_property):
When drop-on-latency is set but we have no latency configured, just push
the buffer as fast as possible.
Fix typo in comment.
Original commit message from CVS:
* configure.ac:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/flutspatinfo.c:
* gst/mpegtsparse/flutspatinfo.h:
* gst/mpegtsparse/flutspmtinfo.c:
* gst/mpegtsparse/flutspmtinfo.h:
* gst/mpegtsparse/flutspmtstreaminfo.c:
* gst/mpegtsparse/flutspmtstreaminfo.h:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
* gst/mpegtsparse/mpegtsparsemarshal.list:
Add mpeg transport stream parser written by:
Alessandro Decina. Includes a couple of files from the
Fluendo transport stream demuxer that Fluendo have
kindly allowed to be licenced under LGPL also.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(bpwsinc_set_property), (bpwsinc_get_property):
* gst/filter/gstbpwsinc.h:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (lpwsinc_build_kernel), (lpwsinc_set_property),
(lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
* tests/check/elements/lpwsinc.c: (GST_START_TEST):
Use generator macros for the process functions for the different
sample types, add lower upper boundaries for the GObject properties
so automatically generated UIs can use sliders and change frequency
properties to floats to save a bit of memory, even ints would in
theory be enough. Also rename frequency to cutoff for consistency
reasons.
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.signals:
* docs/plugins/inspect/plugin-gstrtpmanager.xml:
Regenerated for the above changes.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (process_32), (process_64),
(bpwsinc_build_kernel), (bpwsinc_push_residue),
(bpwsinc_transform), (bpwsinc_start), (bpwsinc_query),
(bpwsinc_query_type), (bpwsinc_event), (bpwsinc_set_property):
* gst/filter/gstbpwsinc.h:
Implement latency query and only forward those samples downstream
that actually contain the data we want, i.e. drop kernel_length/2
in the beginning and append kernel_length/2 (created by convolving
the filter kernel with zeroes) to the end.
* tests/check/elements/bpwsinc.c: (GST_START_TEST):
Adjust the unit test for this slightly changed behaviour.
* gst/filter/gstlpwsinc.c: (lpwsinc_build_kernel):
Reset residue length only when actually creating a residue.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_sink_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix EOS handling.
Convert some DEBUG into WARNINGs.
Pause task when flushing.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(rtcp_thread), (gst_rtp_session_event_recv_rtcp_sink):
Use system clock for RTCP session management timeouts.
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_bye_ssrc), (on_bye_timeout), (on_timeout):
Release the session lock when emiting signals.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (process_32), (process_64),
(lpwsinc_build_kernel), (lpwsinc_push_residue),
(lpwsinc_transform), (lpwsinc_start), (lpwsinc_query),
(lpwsinc_query_type), (lpwsinc_event), (lpwsinc_set_property):
* gst/filter/gstlpwsinc.h:
Implement latency query and only forward those samples downstream
that actually contain the data we want, i.e. drop kernel_length/2
in the beginning and append kernel_length/2 (created by convolving
the filter kernel with zeroes) to the end.
* tests/check/elements/lpwsinc.c: (GST_START_TEST):
Adjust the unit test for this slightly changed behaviour.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_set_index),
(gst_flv_demux_get_index):
Fix locking and refcounting on the index.
Original commit message from CVS:
2007-08-14 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_adapter_flush), (gst_flv_demux_chain),
(gst_flv_demux_pull_tag), (gst_flv_demux_do_seek),
(gst_flv_demux_handle_seek), (gst_flv_demux_sink_event),
(gst_flv_demux_src_event), (gst_flv_demux_query),
(gst_flv_demux_change_state), (gst_flv_demux_set_index),
(gst_flv_demux_get_index), (gst_flv_demux_dispose),
(gst_flv_demux_class_init): First method for seeking in pull
mode using the index built step by step or coming from metadata.
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (FLV_GET_STRING),
(gst_flv_parse_metadata_item), (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video): Parse
more metadata types and keyframes index.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_build_kernel):
* gst/filter/gstlpwsinc.c: (lpwsinc_build_kernel):
Improve debugging a bit.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(bpwsinc_start):
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(lpwsinc_start):
Reset the residue in BaseTransform::start to get a clean residue
on stream changes.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (process_32), (process_64):
* gst/filter/gstlpwsinc.c: (process_32), (process_64):
Fix processing with buffer sizes that are larger than the filter
kernel size.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_build_kernel):
Fix a segfault with more than one channel and don't rebuild
the kernel & residue with every buffer.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_mode_get_type),
(gst_bpwsinc_window_get_type), (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (bpwsinc_build_kernel), (bpwsinc_set_property),
(bpwsinc_get_property):
* gst/filter/gstbpwsinc.h:
Add support for a bandreject mode and allow specifying the window
function that should be used.
* gst/filter/gstlpwsinc.c:
And another small formatting fix.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (process_32), (process_64),
(bpwsinc_build_kernel), (bpwsinc_setup), (bpwsinc_get_unit_size),
(bpwsinc_transform), (bpwsinc_set_property),
(bpwsinc_get_property):
* gst/filter/gstbpwsinc.h:
Apply the same changes to the bandpass filter:
- Support double input
- Fix processing for input with >1 channels
- Specify frequency in Hz
- Specify actual filter kernel length
- Use transform instead of transform_ip as we're working
out of place anyway
- Factor out filter kernel generation and update the filter
kernel when the properties are set
Fix bandpass filter kernel generation to actually generate
a bandpass filter by creating a highpass instead of a second
lowpass.
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init):
Small formatting fix.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (process_32), (process_64),
(lpwsinc_build_kernel), (lpwsinc_set_property),
(lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
Specify the actual filter length instead of a weird
2N+1. Setting the property will round to the next odd number.
Also remove now obsolete FIXMEs.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_window_get_type),
(gst_lpwsinc_class_init), (gst_lpwsinc_init),
(lpwsinc_build_kernel), (lpwsinc_set_property),
(lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
Allow choosing between hamming and blackman window. The blackman
window provides a better stopband attenuation but a bit slower
rolloff.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (process_32), (process_64),
(lpwsinc_build_kernel):
Fix processing if the input has more than one channel.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_dispose),
(gst_bpwsinc_init), (bpwsinc_setup), (bpwsinc_transform_ip),
(bpwsinc_set_property), (bpwsinc_get_property):
"this" is a C++ keyword, use "self" instead.
Add TODOs and FIXMEs and remove two wrong FIXMEs.
* gst/filter/gstlpwsinc.c:
Add FIXMEs and a new TODO.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_dispose),
(gst_lpwsinc_class_init), (gst_lpwsinc_init), (process_32),
(process_64), (lpwsinc_build_kernel), (lpwsinc_setup),
(lpwsinc_get_unit_size), (lpwsinc_transform),
(lpwsinc_set_property), (lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
Add double support, replace "this" with "self" as the former
is a C++ keyword.
Implement the frequency property in Hz instead of fraction
of sampling frequency.
Remove some unecessary FIXMEs and add some TODOs, add some
required locking and refactor the kernel generation into a
separate function that is also called when the properties
change now.
And use BaseTransform::transform instead of transform_ip
as the convolution is done out of place anyway. Should
be done in place later.
Original commit message from CVS:
* configure.ac:
* gst/stereo/Makefile.am:
* gst/stereo/gststereo.c: (gst_stereo_base_init),
(gst_stereo_class_init), (gst_stereo_init),
(gst_stereo_transform_ip), (gst_stereo_set_property),
(gst_stereo_get_property):
* gst/stereo/gststereo.h:
Port the stereo element to GStreamer 0.10.
Original commit message from CVS:
* gst/filter/Makefile.am:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_dispose),
(gst_bpwsinc_base_init), (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (bpwsinc_setup):
* gst/filter/gstbpwsinc.h:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_dispose),
(gst_lpwsinc_base_init), (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (lpwsinc_setup):
* gst/filter/gstlpwsinc.h:
Use GstAudioFilter as base class and don't leak the memory
of the filter kernel and residue.
Original commit message from CVS:
* gst/real/gstrealvideodec.c: (gst_real_video_dec_chain),
(gst_real_video_dec_activate_push), (open_library),
(gst_real_video_dec_init), (gst_real_video_dec_finalize):
* gst/real/gstrealvideodec.h:
Remove some old unused vars.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps):
Small cleanups.
* gst/real/gstrealvideodec.c: (gst_real_video_dec_chain),
(open_library):
Remove fragment and timestamp correction code from the decoder to make
the caps and buffer contents compatible with matroska/ffdec_rvx0/...
Original commit message from CVS:
Patch by: Ian Munro <imunro at netspace net au>
* gst/bayer/gstbayer2rgb.c:
Include our own "_stdint.h" instead of <stdint.h> (which may not
be available).
* gst/speed/gstspeed.h:
Native HP-UX compiler dosn't seem to like enum typedefs before the
actual enum was defined.
* gst/vmnc/vmncdec.c:
Fix wrong usage of GST_ELEMENT_ERROR macro (#461373).
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps):
Use the proper context variable when setting the password !
LOG => WARNING for errors.
Give proper path when opening the codec (needs a '/' at the end).
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_child_proxy_get_child_by_index),
(gst_iir_equalizer_child_proxy_get_children_count),
(gst_iir_equalizer_child_proxy_interface_init),
(gst_iir_equalizer_class_init), (arg_to_scale), (setup_filter),
(gst_iir_equalizer_compute_frequencies):
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_class_init):
* gst/equalizer/gstiirequalizer3bands.c:
(gst_iir_equalizer_3bands_class_init):
* gst/equalizer/gstiirequalizernbands.c:
Better algorith for the center frequencies. Subtract band filters from
input for negative gains. Rework the gain mapping.
Original commit message from CVS:
2007-07-19 Julien MOUTTE <julien@moutte.net>
* configure.ac:
* gst/flv/Makefile.am:
* gst/flv/gstflvdemux.c: (gst_flv_demux_flush),
(gst_flv_demux_cleanup), (gst_flv_demux_chain),
(gst_flv_demux_pull_tag), (gst_flv_demux_pull_header),
(gst_flv_demux_seek_to_prev_keyframe), (gst_flv_demux_loop),
(gst_flv_demux_sink_activate),
(gst_flv_demux_sink_activate_push),
(gst_flv_demux_sink_activate_pull), (gst_flv_demux_sink_event),
(gst_flv_demux_change_state), (gst_flv_demux_dispose),
(gst_flv_demux_base_init), (gst_flv_demux_class_init),
(gst_flv_demux_init), (plugin_init):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (FLV_GET_BEUI24), (FLV_GET_STRING),
(gst_flv_demux_query_types), (gst_flv_demux_query),
(gst_flv_parse_metadata_item), (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_type), (gst_flv_parse_header):
* gst/flv/gstflvparse.h: Adds a first draft of an FLV demuxer.
It does not do seeking yet, it supports pull and push mode so
YES
you can use it to play youtube videos directly from an HTTP uri.
Not so much testing done yet but it parses metadata, reply to
duration queries, etc...
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_create):
Add example to the docs. Fix buffer-offset-end and add some debug.
Original commit message from CVS:
Patch by: Hans de Goede <j.w.r.degoede at hhs dot nl>
* gst/modplug/gstmodplug.cc:
add several missing supported mime-types to the modplug plugin.
Fixes#456901.
Original commit message from CVS:
* gst/multifile/Makefile.am:
* gst/multifile/gstmultifile.c:
* gst/multifile/gstmultifilesink.c:
* gst/multifile/gstmultifilesink.h:
* gst/multifile/gstmultifilesrc.c:
* gst/multifile/gstmultifilesrc.h:
Add .h files to be able to add it to the docs.
Original commit message from CVS:
* gst/videosignal/gstvideodetect.c: (gst_video_detect_420),
(gst_video_detect_set_property), (gst_video_detect_get_property):
* gst/videosignal/gstvideodetect.h:
Add property to adjust the center, sensitivity is now the distance from
this center.
Original commit message from CVS:
* gst/videosignal/gstvideodetect.c: (gst_video_detect_420),
(gst_video_detect_set_property), (gst_video_detect_get_property),
(gst_video_detect_class_init):
* gst/videosignal/gstvideodetect.h:
* gst/videosignal/gstvideomark.c: (gst_video_mark_draw_box),
(gst_video_mark_420), (gst_video_mark_set_property),
(gst_video_mark_get_property), (gst_video_mark_class_init):
* gst/videosignal/gstvideomark.h:
Add left and bottom offset properties to control the position of the
pattern.
Original commit message from CVS:
* examples/switch/switcher.c (my_bus_callback, switch_timer,
last_message_received, main):
* gst/switch/gstswitch.c (gst_switch_release_pad,
gst_switch_request_new_pad, gst_switch_chain, gst_switch_event,
gst_switch_set_property, gst_switch_get_property,
gst_switch_get_linked_pad, gst_switch_getcaps,
gst_switch_bufferalloc, gst_switch_dispose, gst_switch_init):
* gst/switch/gstswitch.h (switch_mutex, GST_SWITCH_LOCK,
GST_SWITCH_UNLOCK):
Add an extra lock to protect against certain variables instead of
using the object lock. Fix case where caps are different in the
sink pads causes deadlock. Update example to use different caps
on each sink pad.
Original commit message from CVS:
* ext/timidity/gsttimidity.c: (gst_timidity_loop):
* ext/timidity/gstwildmidi.c: (gst_wildmidi_loop):
* gst/tta/gstttaparse.c: (gst_tta_parse_loop):
When driving the pipeline, also post an error when we get a
not-linked flow return from downstream.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c:
(mpeg_util_parse_extension_packet), (mpeg_util_parse_sequence_hdr),
(mpeg_util_parse_picture_hdr):
* gst/mpegvideoparse/mpegvideoparse.c:
(mpegvideoparse_handle_sequence), (mpegvideoparse_drain_avail):
Fix some silly bugs with calculating the guard sizes.
Properly compare the old sequence header structure with the new one.
Don't error out on an invalid sequence - just ignore it.
Original commit message from CVS:
* gst/real/gstrealvideodec.c: (gst_real_video_dec_decode):
Printf fix in debug statement; also print the right number there.
Original commit message from CVS:
* ext/libmms/gstmms.h:
No reason to use gpointers instead of typed pointes here as far as I
can see.
* ext/mythtv/gstmythtvsrc.c:
* ext/neon/gstneonhttpsrc.c:
* gst/switch/gstswitch.c:
Don't use gtk-doc magic markers for things that aren't meant to be
parsed by gtk-doc. Makes gtk-doc complain a bit less.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c (gst_spectrum_set_property,
gst_spectrum_event, gst_spectrum_transform_ip):
Use lock to protect from concurrent access.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_chain),
(gst_real_audio_dec_setcaps):
* gst/real/gstrealvideodec.c: (gst_real_video_dec_chain):
Don't crash when we get a buffer and our input caps haven't been set
yet; also, don't leak all the input buffers (realaudiodec only).
Original commit message from CVS:
* ext/x264/gstx264enc.c (gst_x264_enc_init_encoder):
This needs a version check.
* gst/bayer/Makefile.am:
Fix the build.
Original commit message from CVS:
* configure.ac:
* gst/bayer/Makefile.am:
* gst/bayer/gstbayer.c:
* gst/bayer/gstbayer2rgb.c:
Add a Bayer-to-RGB converter. You know you want one, uh-huh.
Partial fix for #314160.
Original commit message from CVS:
* gst/switch/gstswitch.c (ARG_ACTIVE_SOURCE, ARG_STOP_VALUE,
ARG_LAST_TS, parent_class, gst_switch_release_pad,
gst_switch_request_new_pad, gst_switch_chain, gst_switch_event,
gst_switch_set_property, gst_switch_get_property, gst_switch_getcaps,
gst_switch_dispose, gst_switch_init, gst_switch_class_init):
* gst/switch/gstswitch.h (previous_sinkpad, nb_sinkpads, stop_value,
current_start, last_ts):
Allow application to provide a stop timestamp, so a new segment
update can be sent before switching.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps),
(gst_real_audio_dec_finalize):
* gst/real/gstrealaudiodec.h:
* gst/real/gstrealvideodec.c: (open_library), (close_library):
* gst/real/gstrealvideodec.h:
Use GModule instead of using dlsym() directly. Fixes#430598.
Original commit message from CVS:
* gst/speed/gstspeed.c: (speed_src_event), (speed_sink_event),
(speed_chain), (speed_change_state):
Fix event handling a bit by replacing completely dubious code
written by someone else with completely dubious code written
by me. Should at least fix#412077 though.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
Add some debug info.
* gst/rtpmanager/rtpsession.c: (rtp_session_init),
(rtp_session_send_rtp):
Store real user name in the session.
Original commit message from CVS:
* gst/rtpmanager/async_jitter_queue.c: (signal_waiting_threads),
(async_jitter_queue_pop_intern_unlocked):
Fix the case where the buffer underruns and does not block.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_base_init),
(create_recv_rtcp), (create_send_rtp), (create_rtcp),
(gst_rtp_bin_request_new_pad):
Rename RTCP send pad, like in the session manager.
Allow getting an RTCP pad for receiving even if we don't receive RTP.
fix handling of send_rtp_src pad.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
When no pt map could be found, fall back to the sinkpad caps.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Fix pad names.
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_create_source), (rtp_session_process_sr),
(rtp_session_send_rtp), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Unlock session when performing a callback.
Add callbacks for the internal session object.
Fix sending of RTP packets.
first attempt at adding NTP times in the SR packets.
Small debug and doc improvements.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Update stats for SR reports.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst/rtpmanager/gstrtpbin.c: (create_stream),
(gst_rtp_bin_class_init), (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Make default jitterbuffer latency configurable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Debuging cleanups.
Original commit message from CVS:
* gst/y4m/gsty4mencode.c: (gst_y4m_encode_init),
(gst_y4m_encode_setcaps):
* tests/check/elements/y4menc.c: (GST_START_TEST):
Plug some leaks; try to make build bot happy again.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_finalize):
Don't use GLib-2.10 API, we only require GLib 2.8 at the moment.
Original commit message from CVS:
* configure.ac:
Disable rtpmanager for now because it depends on CVS -base.
* gst/rtpmanager/Makefile.am:
Added new files for session manager.
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(create_stream), (pt_map_requested), (new_ssrc_pad_found):
Some cleanups.
the session manager can now also request a pt-map.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_base_init),
(gst_rtp_session_class_init), (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread), (start_rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_process_rtp), (gst_rtp_session_send_rtp),
(gst_rtp_session_send_rtcp), (gst_rtp_session_clock_rate),
(gst_rtp_session_get_time), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_recv_rtcp_sink),
(gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_send_rtcp_src),
(gst_rtp_session_request_new_pad):
* gst/rtpmanager/gstrtpsession.h:
We can ask for pt-map now too when the session manager needs it.
Hook up to the new session manager, implement the needed callbacks for
pushing data, getting clock time and requesting clock-rates.
Rename rtcp_src to send_rtcp_src to make it clear that this RTCP is to
be send to clients.
Add code to start and stop the thread that will schedule RTCP through
the session manager.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_new_ssrc), (on_ssrc_collision), (on_ssrc_validated),
(on_bye_ssrc), (rtp_session_new), (rtp_session_set_callbacks),
(rtp_session_set_bandwidth), (rtp_session_get_bandwidth),
(rtp_session_set_rtcp_bandwidth), (rtp_session_get_rtcp_bandwidth),
(source_push_rtp), (source_clock_rate), (check_collision),
(obtain_source), (rtp_session_add_source),
(rtp_session_get_num_sources),
(rtp_session_get_num_active_sources),
(rtp_session_get_source_by_ssrc),
(rtp_session_get_source_by_cname), (rtp_session_create_source),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye),
(rtp_session_process_app), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_get_rtcp_interval),
(rtp_session_produce_rtcp):
* gst/rtpmanager/rtpsession.h:
The advanced beginnings of the main session manager that handles the
participant database of RTPSources, SSRC probation, SSRC collisions,
parse RTCP to update source stats. etc..
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_finalize), (rtp_source_new),
(rtp_source_set_callbacks), (rtp_source_set_as_csrc),
(rtp_source_set_rtp_from), (rtp_source_set_rtcp_from),
(push_packet), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_process_bye),
(rtp_source_send_rtp), (rtp_source_process_sr),
(rtp_source_process_rb):
* gst/rtpmanager/rtpsource.h:
Object that encapsulates an SSRC and its state in the database.
Calculates the jitter and transit times of data packets.
* gst/rtpmanager/rtpstats.c: (rtp_stats_init_defaults),
(rtp_stats_calculate_rtcp_interval), (rtp_stats_add_rtcp_jitter):
* gst/rtpmanager/rtpstats.h:
Various stats regarding the session and sources.
Used to calculate the RTCP interval.
Original commit message from CVS:
* gst/nsf/types.h:
Rename #ifndef header guard symbol to something less generic, so
types.h doesn't get skipped over when compiling on MingW. Include
GLib headers and use those to set the endianness and the basic
types so that this isn't entirely broken for non-x86 architectures.
Original commit message from CVS:
* gst/mve/gstmvedemux.c: (gst_mve_audio_init):
Use G_LITTLE_ENDIAN instead of LITTLE_ENDIAN, so stuff compiles on
MingW (no idea though why we add a BYTE_ORDER endianness field if
the audio is compressed).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry dot fr>
* ext/pango/gstclockoverlay.c: (gst_clock_overlay_render_time):
Fix unused variable warning if HAVE_LOCALTIME_R is undefinied
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_audio_caps):
* gst/audioresample/gstaudioresample.c: (audioresample_do_output):
Use the correct format strings for integer formats.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
Some more custom marshallers.
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(clock_rate_request), (create_stream), (gst_rtp_bin_class_init),
(pt_map_requested), (new_ssrc_pad_found), (create_recv_rtp):
* gst/rtpmanager/gstrtpbin.h:
Prepare for caching pt maps.
Connect to signals to collect pt maps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add request_clock_rate signal.
Use scale insteat of scale_int because the later does not deal with
negative numbers.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_class_init),
(gst_rtp_pt_demux_chain):
* gst/rtpmanager/gstrtpptdemux.h:
Implement request-pt-map signal.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_init), (gst_rtp_bin_provide_clock):
* gst/rtpmanager/gstrtpbin.h:
Provide a clock.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Add some debug and comments.
Fix double unref() in error cases.
Original commit message from CVS:
* gst/qtdemux/gstrtpxqtdepay.c: (gst_rtp_xqt_depay_process),
(gst_rtp_xqt_depay_change_state):
* gst/qtdemux/gstrtpxqtdepay.h:
Try to recover from packet loss a little better.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_prepare_current_sample),
(gst_qtdemux_chain), (qtdemux_parse_samples):
* gst/qtdemux/qtdemux_dump.c: (qtdemux_dump_ctts):
* gst/qtdemux/qtdemux_dump.h:
* gst/qtdemux/qtdemux_fourcc.h:
* gst/qtdemux/qtdemux_types.c:
Process 'ctts' atoms, which are present in AVC ISO files (.mov files
with h264 video).
Use the offset present in 'ctts' to calculate the PTS for each packet
and set the PTS on outgoing buffers.
Fixes#423283
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_sink_setcaps):
Remove 'channel-positions' field when munging input caps into
1-channel output caps (I guess technically we should set the
position for each channel on the output caps if it's non-NONE,
but I'll save that as a task for another day).
Original commit message from CVS:
* gst/vmnc/vmncdec.c: (gst_vmnc_dec_class_init),
(gst_vmnc_dec_init), (vmnc_dec_finalize), (gst_vmnc_dec_reset),
(vmnc_handle_wmvi_rectangle), (render_colour_cursor),
(render_cursor), (vmnc_make_buffer), (vmnc_handle_wmvd_rectangle),
(vmnc_handle_wmve_rectangle), (vmnc_handle_wmvf_rectangle),
(vmnc_handle_wmvg_rectangle), (vmnc_handle_wmvh_rectangle),
(vmnc_handle_wmvj_rectangle), (render_raw_tile), (render_subrect),
(vmnc_handle_raw_rectangle), (vmnc_handle_copy_rectangle),
(vmnc_handle_hextile_rectangle), (vmnc_handle_packet),
(vmnc_dec_setcaps), (vmnc_dec_chain_frame), (vmnc_dec_chain),
(vmnc_dec_set_property), (vmnc_dec_get_property):
Redesign to include a parser for raw files (no timestamps in that
mode yet, though).
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_add_new_pads),
(gst_deinterleave_remove_pads), (gst_deinterleave_process),
(gst_deinterleave_chain):
Don't leak input buffer in chain function; maintain our own list of
source pads - there are no guarantees about the order of the list
in the GstElement struct, and we want a very specific order; lastly,
some more debugging.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_util_find_start_code),
(collect_packets), (set_par_from_dar), (set_fps_from_code),
(mpeg_util_parse_extension_packet), (mpeg_util_parse_sequence_hdr),
(mpeg_util_parse_picture_hdr):
* gst/mpegvideoparse/mpegpacketiser.h:
* gst/mpegvideoparse/mpegvideoparse.c:
(mpegvideoparse_handle_sequence), (mpegvideoparse_handle_picture),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (plugin_init):
* gst/mpegvideoparse/mpegvideoparse.h:
Move the MPEG specific byte parsing into the mpegpacketiser code.
Add parsing of picture types, that just feeds into a debug message
for now.
Fix some 64-bit format strings.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_init):
A 10 band EQ should be initialized to 1 bands and not to 3.
Original commit message from CVS:
* configure.ac:
* gst/mpeg1videoparse/Makefile.am:
* gst/mpeg1videoparse/gstmp1videoparse.c:
* gst/mpeg1videoparse/gstmp1videoparse.h:
* gst/mpeg1videoparse/mp1videoparse.vcproj:
* gst/mpegvideoparse/Makefile.am:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_packetiser_init),
(mpeg_packetiser_free), (mpeg_packetiser_add_buf),
(mpeg_packetiser_flush), (mpeg_find_start_code),
(get_next_free_block), (complete_current_block),
(append_to_current_block), (start_new_block), (handle_packet),
(collect_packets), (mpeg_packetiser_handle_eos),
(mpeg_packetiser_get_block), (mpeg_packetiser_next_block):
* gst/mpegvideoparse/mpegpacketiser.h:
* gst/mpegvideoparse/mpegvideoparse.c: (mpegvideoparse_get_type),
(gst_mpegvideoparse_base_init), (gst_mpegvideoparse_class_init),
(mpv_parse_reset), (gst_mpegvideoparse_init),
(gst_mpegvideoparse_dispose), (set_par_from_dar),
(set_fps_from_code), (mpegvideoparse_parse_seq),
(gst_mpegvideoparse_time_code), (gst_mpegvideoparse_flush),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (gst_mpegvideoparse_change_state),
(plugin_init):
* gst/mpegvideoparse/mpegvideoparse.h:
* gst/mpegvideoparse/mpegvideoparse.vcproj:
Port mpeg1videoparse to 0.10 and give it rank SECONDARY-1, so
that it's below existing decoders.
Rename it to mpegvideoparse to reflect that it handles MPEG-1 and
MPEG-2 now.
Re-write the parsing code so that it collects packets differently
and timestamps Picture packets correctly.
Add a list of FIXME's at the top.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(audioresample_check_discont), (audioresample_transform):
Don't trigger discontinuities for very small imperfections; a filter
flush will sound bad, and many plugins have rounding errors leading
to these.
Original commit message from CVS:
* gst/audioresample/debug.h:
* gst/audioresample/resample.c: (resample_init):
Since I really am not interested in a debug line for each sample
being processed, move the library's debugging to its own category,
libaudioresample
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (_do_init),
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init),
(gst_iir_equalizer_band_get_type),
(gst_iir_equalizer_child_proxy_get_child_by_index),
(gst_iir_equalizer_child_proxy_get_children_count),
(gst_iir_equalizer_child_proxy_interface_init),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_finalize), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_setup), (plugin_init):
* gst/equalizer/gstiirequalizer.h:
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_base_init),
(gst_iir_equalizer_nbands_class_init),
(gst_iir_equalizer_nbands_init),
(gst_iir_equalizer_nbands_set_property),
(gst_iir_equalizer_nbands_get_property):
* gst/equalizer/gstiirequalizernbands.h:
Refactor plugin into a base class and a first subclass (nband eq). The
nband eq uses GstChildProxy and is controlable. More subclasses will
follow.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c:
* gst/qtdemux/qtdemux.h:
Share qtdemux debug category across all files, otherwise all debugging
in files other than qtdemux.c would end up in the default category.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_start),
(gst_spectrum_event), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
One FIXME less, by resolving message timestamps against the playback
segment.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_set_property),
(gst_spectrum_transform_ip):
Fix and cleanup default property values.
Add FIXMEs for stuff that looks rather wrong.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (message_handler):
* gst/spectrum/demo-osssrc.c: (message_handler):
Remove two obsolete and confusing comments.
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_init), (gst_dtsdec_sink_event):
A few small clean-ups.
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps):
More debug output for failure cases.
Original commit message from CVS:
* configure.ac:
* gst/app/Makefile.am:
* gst/app/gstapp.c:
* gst/app/gstappsrc.c:
* gst/app/gstappsrc.h:
Add a new plugin/library to make it easy for apps to shove
data into a pipeline.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_init):
* gst/real/gstrealvideodec.c: (gst_real_video_dec_init):
Use gst_pad_use_fixed_caps() on source pads, to avoid negotiation
errors in certain situations (e.g. dec ! cs ! ximagesink and the
imagesink window is resized); also, some minor clean-ups.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_class_init),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace):
Rename "values" property to "band-values" and change type into a
GValueArray, so it's more easily bindable and the range of the
values passed in is defined and checked etc.; also do some
locking.
Original commit message from CVS:
* gst/videocrop/gstvideocrop.c:
(gst_video_crop_get_image_details_from_caps),
(gst_video_crop_transform_packed_complex):
Fix cropping for packed 4:2:2 formats YUYV/YUY2 and UYVY.
* tests/icles/videocrop-test.c: (check_bus_for_errors),
(test_with_caps), (main):
Block streaming thread before changing filter caps while the
pipeline is running so that we don't get random not-negotiated
errors just because GStreamer can't handle that yet.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
(gst_multi_file_sink_class_init):
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_class_init):
* gst/mve/gstmvedemux.c: (gst_mve_video_create_buffer),
(gst_mve_video_palette), (gst_mve_video_code_map),
(gst_mve_audio_init), (gst_mve_audio_data), (gst_mve_timer_create),
(gst_mve_demux_chain):
* gst/mve/gstmvemux.c: (gst_mve_mux_push_chunk):
* gst/mve/mveaudioenc.c: (mve_compress_audio):
* gst/mve/mvevideodec16.c: (ipvideo_copy_block):
* gst/mve/mvevideodec8.c: (ipvideo_copy_block):
* gst/mve/mvevideoenc16.c: (mve_encode_frame16):
* gst/mve/mvevideoenc8.c: (mve_encode_frame8):
Use proper print statements.
Fixes build on mac os x.
<wingo> oo look at me my name is edward i'm hacking on macos wooo
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/interleave/deinterleave.c (gst_deinterleave_add_new_pads):
Use fixed caps on src pads.
(gst_deinterleave_remove_pads): Remove src pads, not sink pads. I
seem to have reverse midas disease!
(gst_deinterleave_process): Proxy timestamps, offsets, durations,
and set caps on outgoing buffers. Fixes#395597, I think.
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/interleave/interleave.c (gst_interleave_init): Init the
activation mode properly.
(gst_interleave_src_setcaps, gst_interleave_src_getcaps)
(gst_interleave_init): Set a setcaps and getcaps function on the
src pad, so that we can implement pull-mode negotiation.
(gst_interleave_sink_setcaps): Renamed from
gst_interleave_setcaps, as it only does the sink logic now.
Implement both for pull-mode and push-mode.
(gst_interleave_process): Set caps on our outgoing buffer.
(gst_interleave_src_activate_pull): Fix some more bogus casts.
What is up with this.
Original commit message from CVS:
* gst/mve/gstmvedemux.c: (gst_mve_demux_get_src_query_types),
(gst_mve_demux_handle_src_query), (gst_mve_demux_handle_src_event),
(gst_mve_add_stream):
Support SEEKING query (bad news now delivered properly!); add event
function to source pads to make sure seeks aren't propagated
upstream, even if they aren't handled.
Original commit message from CVS:
2007-01-07 Andy Wingo <wingo@pobox.com>
* configure.ac:
* gst/interleave/Makefile.am:
* gst/interleave/plugin.h:
* gst/interleave/plugin.c:
* gst/interleave/interleave.c:
* gst/interleave/deinterleave.c: New elements interleave and
deinterleave, implement channel interleaving and deinterleaving.
The interleaver can operate in pull or push mode but the
deinterleaver is more like a demuxer and can only operate in push
mode.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_finalize):
Don't call the RAFreeDecoder since it randomly causes segfaults.
* gst/real/gstrealaudiodec.h:
indent properly.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz@topfrose.de>
* gst/real/Makefile.am:
* gst/real/gstreal.c: (plugin_init):
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_chain),
(gst_real_audio_dec_setcaps), (gst_real_audio_dec_init),
(gst_real_audio_dec_base_init), (gst_real_audio_dec_change_state),
(gst_real_audio_dec_finalize), (gst_real_audio_dec_set_property),
(gst_real_audio_dec_get_property), (gst_real_audio_dec_class_init):
* gst/real/gstrealaudiodec.h:
Added RealAudio wrapper elementfactory.
Modified structures so it can also work on x86_64 using the
adequate .so .
Original commit message from CVS:
* configure.ac:
* gst/qtdemux/Makefile.am:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_moov):
Check for zlib and if available pass it explicitly to the linker
when linking qtdemux. If not available (or --disable-external has
been specified!), disable the bits in qtdemux that use it. Fixes
build on MingW (#392856).
Original commit message from CVS:
* configure.ac:
Real video .so are now also available for x86_64, so we can build the
Real plugin on i386 AND x86_64.
* gst/real/Makefile.am:
* gst/real/gstreal.c: (plugin_init):
New plugin file for real .so wrapper plugins.
* gst/real/gstrealvideodec.c: (gst_real_video_dec_alloc_buffer),
(gst_real_video_dec_decode), (gst_real_video_dec_chain),
(gst_real_video_dec_activate_push), (gst_real_video_dec_setcaps),
(open_library), (close_library), (gst_real_video_dec_init),
(gst_real_video_dec_base_init), (gst_real_video_dec_finalize),
(gst_real_video_dec_set_property),
(gst_real_video_dec_get_property), (gst_real_video_dec_class_init):
* gst/real/gstrealvideodec.h:
Moved RealVideo element to separate file
Cleaned up code some more.
Make it work on x86_64.
Try several possible locations for .so
Separate opening/closing libraries in separate functions.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_post_progress),
(gst_qtdemux_chain):
Don't post BUFFERING messages in streaming mode if the stream
headers are behind the movie data; instead, post "progress" element
messages as a temporary solution. Apps might get confused and do
silly things to the pipeline state if they see buffering messages
from different sources and don't realize they come from different
sources (#387160).
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_chain),
(gst_qtdemux_add_stream):
Don't output g_warning for an unsupported format, just send a
GST_ELEMENT_WARNING and don't add the pad.
Fix the case where it doesn't check for a NULL pad in streaming mode.
Fixes#387137
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak):
Fix crash dereferencing NULL pointer if there's no stco atom.
Fixes#387122.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_src_query_types),
(gst_qtdemux_handle_src_query), (gst_qtdemux_handle_src_event):
We don't support seeking in streaming mode, so don't even try.
Implement seeking query so apps can query seekability properly
(see #365414). Fix duration query.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Add AMR-WB to the list of supported formats.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_tree):
Fix non-working redirects from inetfilm.com (handle 'alis' reference
data type as well). Fixes#378613.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin wh9 net>).
* gst/modplug/gstmodplug.cc:
Fix modplug duration query. Fixes#384294.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler de>
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Fix caps for 24 bit raw PCM audio (2).
Fixes#383471.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak),
(qtdemux_video_caps):
Handle more H263 variants.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler de>
* gst/replaygain/gstrganalysis.c: (gst_rg_analysis_event):
Call the base class handler. Fixes#380610.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak):
Remove some asserts and replace them with a proper error
message. Fixes#379261.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak):
Don't parse extra sample params for raw pcm. Fixes#374914.
Original commit message from CVS:
* configure.ac:
* gst/videoparse/Makefile.am:
* gst/videoparse/gstvideoparse.c:
A little pluggy to make sense out of the random chunks we get
from multifilesrc.
Original commit message from CVS:
* gst/multifilesink/Makefile.am:
* gst/multifilesink/gstmultifilesink.c:
* gst/multifilesink/gstmultifilesink.h:
* gst/multifilesink/multifilesink.vcproj:
Remove the old one.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_tree),
(qtdemux_parse_trak):
Handle unbounded length streams a bit better. Fixes#367696.
Original commit message from CVS:
* configure.ac:
* gst/multifilesink/Makefile.am:
* gst/multifilesink/gstmultifilesink.c:
* gst/multifilesink/gstmultifilesink.h:
I copied over filesink a while ago and modified it to work
as multifilesink. Might as well check it in. This could
use some work before being declared useful.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
Patch by: Josep Torra Valles <josep at fluendo com>
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(next_entry_size), (qtdemux_inflate), (qtdemux_parse_moov),
(qtdemux_parse_tree), (qtdemux_parse_trak), (qtdemux_tag_add_str),
(qtdemux_tag_add_num), (qtdemux_tag_add_date),
(qtdemux_tag_add_gnre):
Make compile with Forte compiler, mostly don't do pointer arithmetic
with void pointers (#362626).
Original commit message from CVS:
Patch by: Josep Torra Valles <josep at fluendo com>
* gst/nsf/fds_snd.c:
* gst/nsf/mmc5_snd.c:
* gst/nsf/nsf.c:
* gst/nsf/vrc7_snd.c:
* gst/nsf/vrcvisnd.c:
Fix some things the Forte compiler warns about (#362626).
Original commit message from CVS:
* configure.ac:
* gst/deinterlace/Makefile.am:
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_base_init),
(gst_deinterlace_class_init), (gst_deinterlace_init),
(gst_deinterlace_stop), (gst_deinterlace_transform_caps),
(gst_deinterlace_set_caps), (gst_deinterlace_transform_ip),
(gst_deinterlace_set_property), (gst_deinterlace_get_property):
* gst/deinterlace/gstdeinterlace.h:
Port simple deinterlacer from 0.8. Use at your own risk, don't blame
me for anything it does or does not do to your precious pictures.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (extract_initial_length_and_fourcc),
(gst_qtdemux_loop_state_header):
Printf format fixes.
* sys/dvb/gstdvbsrc.c:
Use "_stdint.h".
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* ext/gnomevfs/gstgnomevfssink.c:
* ext/gnomevfs/gstgnomevfssrc.c:
Fix URI interface implementation return type.
* ext/pango/gsttextoverlay.c: (gst_text_overlay_set_property):
Fix what looks like a copy/paste issue when assigning values.
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
(gst_audio_filter_template_get_type):
Cast to prevent Forte warnings.
* gst-libs/gst/cdda/gstcddabasesrc.c: (gst_cdda_base_src_create):
Fix URI interface implementation return type.
gst_pad_query_position requires a signed integer pointer as
3rd parameter, GstClockTime is unsigned.
* gst/audioconvert/audioconvert.c:
Fix integer overflow when treated as signed.
* gst/audioresample/resample.c: (resample_add_input_data):
Cast to prevent warnings on Forte.
* gst/ffmpegcolorspace/imgconvert.c: (build_rgb_palette):
Fix integer overflow when treated as signed.
* gst/ffmpegcolorspace/imgconvert_template.h:
Fix integer overflow when treated as signed. RGBA_OUT shifts bits.
* gst/playback/gstdecodebin.c: (queue_filled_cb),
(cleanup_decodebin):
Who initialises a guint to -1!
Cast function pointers to prevent warnings on Forte.
* gst/playback/gstplaybasebin.c: (queue_deadlock_check),
(queue_threshold_reached):
Cast function pointers correctly to prevent warnings on Forte.
* gst/playback/gststreaminfo.c: (gst_stream_info_dispose):
Cast function pointers correctly to prevent warnings on Forte.
* gst/subparse/gstssaparse.c: (gst_ssa_parse_setcaps):
Obvious change to unsigned, 0xEF > max signed char.
* gst/tcp/gstmultifdsink.c: (get_buffers_max), (count_burst_unit):
GstClockTime is unsigned, initialise correctly.
* gst/tcp/gsttcp.c: (gst_tcp_socket_write):
Cast so pointer arithemetic doesn't cause warnings on Forte.
* gst/videorate/gstvideorate.c:
Use correct return value.
* tests/examples/seek/scrubby.c:
GstClockTime is unsigned, initialise correctly.
