Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
Allow refcount of 3 and 4 because some state thread might still be busy
with it.
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (store_callback),
(GST_START_TEST):
Improve test_async_order to also work when both timers are already
expired when we get scheduled to check it.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
Original commit message from CVS:
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Disable part of the gst_buffer_try_new_and_alloc test, because
it can happily succeed on 64-bit systems where there's more address
space available.
Original commit message from CVS:
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add unit test for the improved caps checking from bug #421543.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_finalize), (update_time_level), (apply_segment),
(apply_buffer), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Refactor an cleanup queue a bit.
Do better time level calculations that also work when the srcpad is not
yet running.
Remove some unneeded debug lines.
* tests/check/elements/queue.c: (GST_START_TEST), (queue_suite):
Added testcase for time level measurement.
Try to make some stuff more racefree.
Original commit message from CVS:
Based on patch by: Peter Kjellerstedt <pkj at axis com>
* gst/Makefile.am:
* gst/gstparse.c: (gst_parse_launchv), (gst_parse_launch):
* gst/gstparse.h:
* gst/gstutils.c: (gst_parse_bin_from_description):
* gst/gstutils.h:
Maintain API and ABI when --disable-parse is used. Now that
we have an appropriate error code, we can just return NULL and the
appropriate error when gst_parse_launch() is used despite it having
been disabled (#342564).
* tests/check/Makefile.am:
* tests/check/pipelines/.cvsignore:
* tests/check/pipelines/parse-disabled.c:
Make sure these functions exist and return NULL plus a GError when
--disable-parse is used.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
* libs/gst/controller/gstinterpolation.c:
Don't crash if someone tries to set an interpolation mode that
is invalid or that isn't supported yet. Fixes#422295.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add a test case for the above.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbuffer.c: (gst_buffer_try_new_and_alloc):
* gst/gstbuffer.h:
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
API: add gst_buffer_try_new_and_alloc() plus unit test (#431940).
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(mixed_thread), (mixed_async_cb), (gst_systemclock_suite):
Unref some more to make valgrind happy.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter),
(gst_system_clock_id_wait_async), (gst_system_clock_id_unschedule):
Fix anoying regression that survived a few releases. When adding an
async entry while blocking on a sync entry, the sync entry will unblock
but still be busy, so it should continue to wait instead of returning
_BUSY to the app.
Add some comments here and there.
* tests/check/gst/gstsystemclock.c: (mixed_thread),
(mixed_async_cb), (GST_START_TEST), (gst_systemclock_suite):
Add testcase for this.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/Makefile.am (noinst_HEADERS):
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc32.h: Add ABI checks for PPC32.
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc32.h: Add ABI checks for PPC32.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Add unit test for the GstURIHandler interface in filesrc. This also
tests the newly added file://localhost/foo/bar support.
Original commit message from CVS:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_hppa.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
Add ABI structs for HPPA (see #393796).
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see #393796).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST), (queue_suite):
enable queue test again, add tests for the leaky behaviour
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
Original commit message from CVS:
* tests/check/elements/.cvsignore:
ignore more
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
try to narrow test failure
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
It is acceptable to have a refcount of 2 or 3 at this point in the
test, because the pipeline might be just posting its state_change
message. The next line then waits for that message to appear using
bus_poll, so that should be fine too.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_id_wait):
Make period ids add the interval to the origial requested time instead
of the possibly updated time which can be wrong when there are multiple
waiters for the same id. Fixes#382592.
* gst/gstsystemclock.c: (gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Fix restart in the async notify thread when an async entry is added to
the front of the list. Fixes#381492.
* tests/check/gst/gstsystemclock.c: (store_callback),
(notify_callback), (GST_START_TEST), (gst_systemclock_suite):
Added test for multiple async waits.
Added test for async wait order.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes#377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set_value):
If someone tries to set a non-UTF8 string field on a structure,
don't just print a warning, but also ignore the request and do
not change/add that field to the structure.
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Test for the above.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_list):
Fix refcounting here too, just like we did for _new_valist() a few
days ago (#357180) (thanks to René Stadler). Also remove all those
'Since: 0.9' from the gtk-doc blobs.
* tests/check/libs/controller.c: (controller_refcount_new_list),
(gst_controller_suite):
Unit test for the above.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_list_is_empty):
* gst/gsttaglist.h:
* docs/gst/gstreamer-sections.txt:
API: add gst_tag_list_is_empty() (#360467).
* tests/check/gst/gsttag.c: (GST_START_TEST):
And a test case.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_is_tag_list):
* gst/gsttaglist.h:
Minor fixes to GST_IS_TAG_LIST and gst_is_tag_list().
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Small test for the above.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva org>
* gst/gstevent.c: (_gst_event_copy):
Fix gst_mini_object_make_writable() and gst_event_copy() for events
with event structures by setting the parent refcount address of the
copied structure to the address of the refcount member of the newly
copied event rather than the address of the refcount member of the
original event. Fixes#358737.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Unit test for the above.
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add test for the previous fix; add some more tests
for correct refcounting behaviour; fix a few leaks
in test cases; call gst_controller_init() at start
of all tests.
Original commit message from CVS:
* gst/gst.c: (init_pre), (scan_and_update_registry),
(ensure_current_registry_nonforking),
(ensure_current_registry_forking), (ensure_current_registry),
(init_post), (gst_debug_help), (gst_deinit):
* gst/gst_private.h:
* gst/gstregistry.c: (gst_registry_finalize),
(gst_registry_remove_features_for_plugin_unlocked),
(gst_registry_remove_plugin), (gst_registry_scan_path_level),
(gst_registry_scan_path),
(_priv_gst_registry_remove_cache_plugins),
(_priv_gst_registry_cleanup):
* gst/gstregistry.h:
Re-commit the registry changes, along with an extra fix:
When a cached plugin is encountered at a different file path,
update the stored path in the registry cache so that the parent
process knows where it actually is now when it re-reads the registry
cache. Fixes the thing that broke distcheck with the previous commit.
* tests/check/Makefile.am:
Clean up files named 'core' too when running make clean.
* tests/examples/manual/Makefile.am:
Set up a registry path for running these tests, and clean it properly
for distcheck.
Original commit message from CVS:
* tests/check/gst/gstcaps.c: (GST_START_TEST), (gst_caps_suite):
Add some tests for gst_caps_intersect().
* tools/gst-launch.c: (event_loop):
Print all buffering percentages we get, even the 100% one.
Original commit message from CVS:
* gst/gstformat.c: (gst_format_register):
Fix locking order (must take lock before using n_values).
* gst/gstvalue.c: (gst_value_serialize_enum),
(gst_value_deserialize_enum_iter_cmp),
(gst_value_deserialize_enum):
Fix serialisation/deserialisation of custom registered GstFormats.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Unit test for custom format serialisation/deserialisation.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_parent):
* gst/gstpipeline.c: (do_pipeline_seek):
Small cleanups in docs and code.
* gst/gstsegment.c: (gst_segment_clip):
* tests/check/gst/gstsegment.c: (GST_START_TEST):
if stop == start and start is in the segment, no clipping should be
done. Also add a test for this.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Update ascii art in documentation.
* gst/gstghostpad.c: (gst_proxy_pad_do_internal_link),
(gst_proxy_pad_set_target_unlocked), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_set_target):
Small cleanups and leak fixes.
Remove some checks now that the internal pad is never NULL.
Fix the case where linking pads without a target would create nasty
criticals. Fixes#341029.
Don't assign a GstPadLinkReturn to a gboolean and mess up the return
value of _set_target().
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Some more tests for creating and linking untargeted ghostpads.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstghostpad.c: (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_new_no_target), (gst_ghost_pad_new),
(gst_ghost_pad_new_from_template),
(gst_ghost_pad_new_no_target_from_template):
* gst/gstghostpad.h:
Refactored *_new() functions.
Templates are now used as a g_object_new() parameter.
Use template in _do_getcaps() if we don't have a target.
Small documentation cleanups.
Added two new constructors:
gst_ghost_pad_new_from_template()
gst_ghost_pad_new_no_target_from_template()
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Added tests for new ghostpad instanciation functions.
API additions: gst_ghost_pad_new_from_template,
gst_ghost_pad_new_no_target_from_template
Original commit message from CVS:
* gst/gstxml.c:
Improve and detypofy docs.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstxml.c: (GST_START_TEST), (gst_xml_suite):
Add a basic test suite for GstXML.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_merge_structure):
* gst/gstcaps.h:
Fix docs and indentation again.
* tests/check/gst/gstquery.c: (GST_START_TEST):
Fix leak in tests and add some more tests.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstquery.c: (gst_query_new_segment):
* tests/check/gst/gstquery.c: (GST_START_TEST):
Initialize variables when creating a new segment query.
Fixes#353121.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstelement.c: (gst_element_get_bus):
* tests/check/gst/gstelement.c: (GST_START_TEST):
Check for NULL before _reffing the bus. Fixes#353122.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_make_metadata_writable),
(gst_buffer_create_sub):
Copy duration/offset_end/caps when creating a subbuffer of the
complete parent.
Make the subbuffer read-only when we make the metadata writable for
now. Fixes#351768.
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Added check for metadata copy when creating subbuffers.
Original commit message from CVS:
* gst/gstutils.c: (gst_util_set_value_from_string):
Fix memleak (#351502).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Add unit test for most of gst_util_set_value_from_string()
(not that one would want to encourage use of this function).
Original commit message from CVS:
* gst/gstinfo.c: (gst_debug_print_object):
Make GST_PTR_FORMAT print messages as well.
* tests/check/gst/gstinfo.c: (printf_extension_log_func),
(GST_START_TEST), (gst_info_suite):
More tests.
Original commit message from CVS:
2006-08-11 Andy Wingo <wingo@pobox.com>
* configure.ac:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packetizer_new):
* tests/check/libs/gdp.c: (gst_dp_suite): GST_DISABLE_DEPRECATED
is only for users of API that don't want to see deprecated
functions in the headers; people that want to compile out
deprecated code should pass -DGST_REMOVE_DEPRECATED into the
CFLAGS. Fixes the build of multifdsink, or will soon..
Original commit message from CVS:
* libs/gst/controller/gstcontroller.h:
fix ABI size-correction
* tests/check/libs/gdp.c: (gst_dp_suite):
make tests that use deprecated API conditional
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/gstconfig.h.in:
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_print_segment),
(_gst_info_printf_extension_ptr),
(_gst_info_printf_extension_segment):
API: add GST_SEGMENT_FORMAT, which is a printf extension we
register that lets us easily dump GstSegments into debug
logs (#350419).
* tests/check/gst/gstinfo.c: (segment_printf_extension_log_func),
(info_segment_format_printf_extension), (gst_info_suite):
Add simple unit test that logs a bunch of different segments (not
valgrinded at the moment because of leaks in gst_debug_add_log_function).
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
Use the architecture information from config.h and not gcc macros
in order to properly disable a test that fails on PPC64.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer_any), (gst_dp_packet_from_caps_any),
(gst_dp_crc), (gst_dp_header_payload_length),
(gst_dp_header_payload_type), (gst_dp_packet_from_event),
(gst_dp_packet_from_event_1_0), (gst_dp_buffer_from_header),
(gst_dp_caps_from_packet), (gst_dp_event_from_packet_0_2),
(gst_dp_event_from_packet), (gst_dp_validate_header),
(gst_dp_validate_payload):
Make debug category static
Constify the crc table.
Do some more arg checking in public functions.
Fix some docs and do some small cleanups.
* tests/check/libs/gdp.c: (GST_START_TEST), (gst_dp_suite):
Add some more checks to see if GDP deals with bogus input.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
Remove unnecessary ref/unref pair
* gst/parse/grammar.y:
Make sure to free the parse buffer on all code paths.
Move a g_free up to the error handler where it's easier to see.
* tests/check/gst/gstevent.c: (test_event):
Extending timeout for downstream travelling events to 10 seconds to
hopefully avoid intermittent failure on the buildbots.
* tests/check/pipelines/parse-launch.c: (run_delayed_test):
Don't manually set the state of the src element - it will happen as a
natural consequence of the pipeline changing state, and that way it
will do it in the right order too.
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Make all uses of identity and fakesink have silent=true to avoid
serialising every passing data structure, which is breaking tests
on FC4 for some unknown reason.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Oops, meant to uncomment this line too to dampen the noise a bit.
Original commit message from CVS:
* gst/parse/grammar.y:
* gst/parse/parse.l:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (parse_suite):
Fix some of the leaks exposed by extending the parse-launch testsuite,
and move the 3 I can't figure out into a separate test that won't run
the pipelines unless the appropriate line is uncommented.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
the test_buffer test fails at line 140 on ppc64 at the following
check:
fail_unless (GST_BUFFER_FLAG_IS_SET (newbuffer, GST_BUFFER_FLAG_IN_CAPS),
"GST_BUFFER_IN_CAPS flag should have been copied !");
See bug #348114 for more details.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail com>
* gst/gstutils.c: (gst_element_unlink):
Free iterator when done (#347311).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
And add a test case for this.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_array), (_gst_value_initialize):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Make GstValueArray comparison be order dependent as designed.
Add checks for value lists and value array comparisons.
Fixes#347221
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_name_default),
(gst_object_set_name):
Random micro-optimisation: don't use a hash table
with strings as keys and the usual strdup/strcmp
involved, but rather just use the GQuark of the
type name as key, since it needs to be looked up
anyway to get the type name string.
* tests/check/gst/gstobject.c: (GST_START_TEST):
Fix various leaks.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_copy), (gst_buffer_create_sub):
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
No point in checking if the size of the subbuffer > 0, the
code handles it correclty as demonstrated by unit test.
Also add a unit test for the zero sized _new_and_alloc and
_copy. Fixes#346663.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* configure.ac:
don't set CFLAGS and friends for gcov, done from GST_GCOV now
* tests/check/Makefile.am:
clean up gcov files
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* tests/check/Makefile.am:
gst-inspect every element; this makes sure that we also get
coverage on element's get/set functions
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Push coverage from 59.04% to 70.00%
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (block_callback),
(GST_START_TEST), (gst_ghost_pad_suite):
Added some more ghostpad tests, mainly blocking
and probes.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
fix a leak if no flags are set
* tests/check/gst/gstvalue.c: (GST_START_TEST):
fix leak in tests
Original commit message from CVS:
* gst/gstevent.c: (_gst_event_initialize):
* gst/gstformat.c: (_gst_format_initialize):
make sure some essential types used by events are registered
as part of gst_init()
* gst/gstvalue.c: (gst_value_serialize_flags):
if no flags are set, serialize them to a value that represents NONE
so that deserializing them works
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
add tests for serialization and deserialization of flags
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
2006-04-29 Thomas Vander Stichele <thomas at apestaart dot org>
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
add more asserts on refcounts
do more cleanup at end of tests
fix test leaks showing in FC5
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer):
Don't try to serialize a GValue with a NULL buffer.
Fixes#339821.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Added check for serialisation of NULL buffers.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register),
(gst_element_factory_create), (gst_element_factory_make):
Some cleanups.
Fixed a FIXME.
Updated docs (Fixes#131079)
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
Small cleanups.
* tests/check/gst/gstelement.c: (GST_START_TEST),
(gst_element_suite):
Added testcase for elementfactory class field.
Original commit message from CVS:
* gst/parse/grammar.y:
Fix a leak in parse-launch for any source-or-sink named element
references used.
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Unref the pipeline if it exists after we've failed parsing.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Unref a pad we reffed.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Unref bins
Original commit message from CVS:
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix a variety of memleaks in sinks check, which are only sometimes
shown by running the tests under valgrind (weird?).
Original commit message from CVS:
* configure.ac:
* tests/check/Makefile.am:
disable some tests when we don't have a registry
* tests/check/gst/gstutils.c: (gst_utils_suite):
don't build the part that needs parsing
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstevent.h:
* gst/gstmessage.h:
gst_[buffer|event|message]_ref() macros are replaced by a static
inline functions because gcc-4.1 will about if the return value
isn't used.
* tests/check/gst/gstevent.c: (event_probe):
gst_event_ref now has to be given a GstEvent* , fix check accordingly.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/basesrc.c: (eos_event_counter),
(basesrc_eos_events_pull), (basesrc_eos_events_push),
(basesrc_eos_events_push_live_op), (basesrc_eos_events_pull_live_op),
(gst_basesrc_suite), (main):
... and add some tests for the base source EOS stuff.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_buffer_probe_n_times):
Test case originally showed the problem fixed below,
but was then amended. Add checks back at the place
where they used to be.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (data_probe), (buffer_probe),
(event_probe), (GST_START_TEST):
Only events up to the pipeline EOS are counted, there are
some more when going to NULL currently which we don't care
about for now.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_parse_bin_from_description),
(gst_utils_suite):
Add some simple tests for gst_parse_bin_from_description() and
gst_bin_find_unconnected_pad() (#329069).
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_unlink_pads):
Don't leak pad references.
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/generic/states.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstcaps.c: (GST_START_TEST):
* tests/check/gst/gstelement.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstiterator.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Fix a bunch of leaks. Make generic/sinks.c
use a bit less cpu by slowing the buffer rate
between fakesrc and fakesink.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/gstquery.c: (GST_START_TEST), (gstquery_suite),
(main):
Add a very simple check that should have caught the memleak I fixed
last night (if not for the slice allocator hiding it)
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/fakesink.c: (chain_async_buffer),
(chain_async), (chain_async_return), (GST_START_TEST),
(fakesink_suite), (main):
Added fakesink test that checks prerolling and clipping
behaviour.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Make check run faster so that buildbots don't timeout.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_mini_object_lcopy):
Fix lcopy for mini objects, the mini object needs to be ref'ed.
* tests/check/gst/gstminiobject.c: (my_foo_init),
(my_foo_get_property), (my_foo_set_property), (my_foo_class_init),
(test_value_collection), (gst_mini_object_suite):
Add test to ensure refcounts end up as expected when passing
GstMiniObjects through g_object_get() and g_object_set().
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_init),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Added more documentation.
Make sure the last_pos value is updated properly.
Make sure to_stream_time and to_running_time don't
operate on wrong values.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Update check.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/libsabi.c: (GST_START_TEST), (gstabi_suite),
(main):
* tests/check/libs/struct_i386.h:
Added ABI check for libs, this time for real
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstplugin.h:
* gst/gstregistry.h:
* tests/benchmarks/complexity.c:
* tests/benchmarks/mass-elements.c:
* tests/check/Makefile.am:
* tools/Makefile.am:
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
various fixes to make
--disable-nls --disable-registry --disable-loadsave --disable-parse --disable-gst-debug
work and get the core .so down to 360444 bytes after stripping
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST):
Updated check, add some scaling accuracy checking code.
* gst/gstutils.c: (gst_util_div128_64),
(gst_util_uint64_scale_int64), (gst_util_uint64_scale),
(gst_util_uint64_scale_int):
Fix 6 times faster division code. Optimize for common
1/1 and less common X/1 cases.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
More checks.
* gst/gstclock.c: (gst_clock_finalize), (gst_clock_set_master),
(do_linear_regression), (gst_clock_add_observation):
Cleanups.
Release lock when the clock cannot be slaved.
Catch the case where the regression returned an invalid denominator.
* gst/gstutils.c: (gst_util_div128_64_iterate),
(gst_util_div128_64), (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Add protentially more performant non-iterative 128/64 divide function
that unfortunatly does not work yet.
Shortcut the trivial 0/X = 0 case.
Remove the warnings on overflow.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/fdsrc.c: (GST_START_TEST):
Use a cmdline define to specify the location of a file to use for
testing, to avoid breaking distcheck.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added more checks for the high precision uint64 cases.
* gst/gstutils.c: (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Implement high precission (guint64 * guint64) / guint64.
Original commit message from CVS:
* check/gst/gstminiobject.c: (thread_ref), (GST_START_TEST),
(gst_mini_object_suite):
don't use check calls from threads; check probably isn't
threadsafe and using a lock to make it threadsafe would
defeat the purpose of this check
* gst/check/gstcheck.c:
* gst/check/gstcheck.h:
use GST_DEBUG some more
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added test for scaling.
* gst/gstclock.h:
Small doc fix.
* gst/gstutils.c: (gst_util_uint64_scale_int):
Implemented high precision scaling code.
Original commit message from CVS:
2005-11-23 Andy Wingo <wingo@pobox.com>
* check/net/gstnetclientclock.c (test_functioning): Adjust to
rate_num/rate_denom change.
* gst/net/gstnetclientclock.c
(gst_net_client_clock_observe_times): Take the SLAVE_LOCK not the
OBJECT_LOCK. Don't call add_observation with the lock.
* gst/gstclock.c (gst_clock_init): Initialize the rate as a
fraction.
(gst_clock_adjust_unlocked): Adjust using uint64_scale and the
rate fraction.
(gst_clock_set_calibration, gst_clock_get_calibration): Change to
deal with rate as a fraction whose numerator and denominator are
GstClockTime values.
(gst_clock_set_master): Only use the OBJECT_LOCK to set the
master; the other fields are protected by the SLAVE_LOCK.
(do_linear_regression): Note that this must be called with the
SLAVE_LOCK.
(gst_clock_add_observation): Take the SLAVE_LOCK, not the
OBJECT_LOCK. Call set_calibration instead of touching the
variables directly.
(gst_clock_set_property, gst_clock_get_property): Protect
master/slave parameters with the SLAVE_LOCK.
* gst/gstclock.h (GstClock): Remove rate, add rate_numerator and
rate_denominator. PR3C1S3. Add a new lock, the SLAVE_LOCK, and
note that all of the instance variables that add_observation and
the set_master functions use are protected by that lock and not
the OBJECT_LOCK.
(GST_CLOCK_SLAVE_LOCK, GST_CLOCK_SLAVE_UNLOCK): New macros.
* gst/gstclock.c (gst_clock_add_observation): No longer requires
the caller to take the object lock.
Original commit message from CVS:
* check/gst/gststructure.c: (GST_START_TEST):
* gst/gststructure.c: (gst_structure_parse_value):
Oops, broke automatic string type parsing.
Add a test to catch it in future.
Original commit message from CVS:
* check/gst/capslist.h:
Comment test cases
* check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Test automatic value type detection in gst_structure_from_string.
* gst/gststructure.c: (gst_structure_parse_value):
Add fraction as a type we try and guess automatically in
caps/structure strings.
Original commit message from CVS:
* check/gst/gstcaps.c: (GST_START_TEST):
Extend caps string tests to check that a caps to string
conversion is reversible and produces the same caps.
* gst/gststructure.c: (gst_structure_value_get_generic_type):
Output "fraction" as the generic type fraction range, so caps
serialisation and deserialisation works.
* check/gst/capslist.h:
* gst/gstvalue.c: (gst_value_deserialize_fraction):
Support 'MIN' and 'MAX' for deserialising fractions.
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
* check/gst/gstevent.c: (test_event), (GST_START_TEST):
Block the fakesrc srcpad when we send an event, to avoid
contention on the stream_lock causing random test failures.
Original commit message from CVS:
* check/gst/capslist.h:
* check/gst/gstcaps.c: (GST_START_TEST):
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
* gst/gststructure.c: (gst_structure_parse_range),
(gst_structure_fixate_field_nearest_fraction):
* gst/gststructure.h:
* gst/gstvalue.c: (gst_value_init_fraction_range),
(gst_value_free_fraction_range), (gst_value_copy_fraction_range),
(gst_value_collect_fraction_range),
(gst_value_lcopy_fraction_range), (gst_value_set_fraction_range),
(gst_value_set_fraction_range_full),
(gst_value_get_fraction_range_min),
(gst_value_get_fraction_range_max),
(gst_value_serialize_fraction_range),
(gst_value_transform_fraction_range_string),
(gst_value_compare_fraction_range),
(gst_value_deserialize_fraction_range),
(gst_value_intersect_fraction_fraction_range),
(gst_value_intersect_fraction_range_fraction_range),
(gst_value_subtract_fraction_fraction_range),
(gst_value_subtract_fraction_range_fraction),
(gst_value_subtract_fraction_range_fraction_range),
(gst_value_collect_fraction), (gst_value_fraction_multiply),
(gst_value_fraction_subtract), (gst_value_deserialize_fraction),
(gst_value_transform_string_fraction), (_gst_value_initialize):
* gst/gstvalue.h:
Implement fraction ranges and extend GstFraction to support
arithmetic subtraction, as well as deserialization from integer
strings such as "100"
Add a testsuite as for int and double range set operations
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (GST_EVENT_FILLER): Removed. Can be added back
during the stable series if we need it. Fixes#319178.
* gst/gstevent.c (gst_event_new_filler): Removed.
* check/gst/gstevent.c: Update comment about filler events.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (GstEventTypeFlags): New data type, the flags of
the event type (upstream, downstream, serialized). Renamed
GST_EVDIR_* and GST_EVSER to GST_EVENT_TYPE_*.
(GstEventType): Use GstEventTypeFlags. Rename CUSTOM_UP to
CUSTOM_UPSTREAM, CUSTOM_DS to CUSTOM_DOWNSTREAM, etc.
* gst/gstevent.c: Update for new CUSTOM event names.
* check/gst/gstevent.c: Update check for new CUSTOM event names.
* gst/gstevent.h:
* gst/gstevent.c (gst_event_type_get_flags): New function. Fixes
bug #319392.
Original commit message from CVS:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add a deserialisation test for fractions
* examples/metadata/read-metadata.c: (message_loop),
(make_pipeline), (main):
Fix up metadata reading sample.
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Debug format fix
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't try and fixate empty caps
* gst/gst_private.h:
Wrap in G_BEGIN_DECLS/G_END_DECLS
* gst/gstvalue.c: (gst_value_collect_fraction),
(gst_value_set_fraction), (gst_value_get_fraction_denominator),
(gst_value_transform_string_fraction),
(gst_value_compare_fraction):
Add some extra guards to ensure that we don't end up
with an invalid denominator of 0 in a gstfraction and
that fractions always get reduced.
Original commit message from CVS:
2005-11-19 Andy Wingo <wingo@pobox.com>
* check/gst/gstvalue.c (test_string): Add test for bug #165650.
* gst/gstvalue.c (gst_string_wrap): Trying to serialize a NULL
string should produce an error, given the lack of a way to
represent NULL strings. Fixes#165650.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c: Turn off debugging.
* check/net/gstnetclientclock.c (test_functioning): Assert that the
times connverge somewhat. Can't make a real test.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (do_linear_regression): Use all
integer arithmetic. Return the minimum of the domain, which can be
set as "internal" for gst_clock_set_calibration.
(gst_net_client_clock_observe_times): Call _set_calibration.
(gst_net_client_clock_new): Call _set_calibration instead of
rate_offset.
* check/net/gstnetclientclock.c (test_functioning): Use the right
adjustment api.
* gst/gstclock.h:
* gst/gstclock.c (gst_clock_get_calibration)
(gst_clock_set_calibration): New functions, obsolete the ones I
added yesterday. Doh. Precision issues mean we have to extrapolate
from a point in the more recent past than 1970.
(gst_clock_get_rate_offset, gst_clock_set_rate_offset): Mark as
obsolete.
(gst_clock_adjust_unlocked): Use the right calibration data.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_thread):
Whoops, check the right fd. Also add some debugging.
(gst_net_client_clock_observe_times): Adjust for int64 offset.
(do_linear_regression): Add a crapload of debugging. Subtract off
the minimum values from the input series to discard unneeded bits.
Use only int arithmetic. There is still double arithmetic when
calculating the intercept that needs fixing. Return boolean to
indicate success; FALSE would mean the domain or range is too
great. Still needs fixes.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_class_init):
Port goes all the way to MAXUINT16.
* gst/net/gstnettimeprovider.c: Make the port range the same as
for the kernel: 0 assigns, otherwise ports are less than
MAXUINT16.
* check/net/gstnettimeprovider.c: Adapt for 0 == kernel assigns
port change.
* check/net/gstnetclientclock.c (test_functioning): Add the start
of another test.
Original commit message from CVS:
2005-11-17 Andy Wingo <wingo@pobox.com>
* check/Makefile.am (check_PROGRAMS):
* check/net/gstnetclientclock.c: Add a most minimal test for the
net client clock. More to come later.
* gst/net/gstnet.h:
* gst/net/Makefile.am: Add netclientclock.
* gst/net/gstnetclientclock.h:
* gst/net/gstnetclientclock.c: New files, implement an untested
GstClock that takes its time from a network time provider.
Implements the algorithm in network-clock.scm.
* tests/network-clock.scm (*window-size*): Rename from
*queue-length*.
* tests/network-clock.scm (network-time):
* tests/network-clock-utils.scm (q-push): Update callers.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* check/net/gstnettimeprovider.c: Check to see that the time
provider actually provides times. Works, yo!
Original commit message from CVS:
* check/Makefile.am:
Enable more tests.
* check/elements/fakesrc.c: (GST_START_TEST):
Set element to NULL before disposing it.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h:
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: Use the timepacket stuff in the
provider, include it from gstnet.h, and add it to the build.
* gst/net/gstnettimepacket.h:
* gst/net/gstnettimepacket.c: New files, abstracts out the packet
sending and receiving.
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h: New part of core to hold network elements and
objects. Put in core because it exposes API that applications want
to use. The library is named libgstnet-tempname right now because
of the existing libgstnet in gst-plugins-base. Solution is
probably to rename the one in plugins-base; will file a bug for
the freeze break.
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: New object to export a GstClock's
get_time call over the network.
* configure.ac:
* gst/Makefile.am (lib_LTLIBRARIES): Add gstnet to the build.
* check/Makefile.am:
* check/net/gstnettimeprovider.c: A most minimal test suite. Will
get additions shortly.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_set_base_time): Add debugging.
* gst/gstpipeline.c (gst_pipeline_set_new_stream_time): Document
using GST_CLOCK_TIME_NONE to disable base time management.
(do_pipeline_seek, gst_pipeline_change_state): Don't reset stream
time if it was NONE before.
(gst_pipeline_change_state): Only munge the base time if
stream_time != GST_CLOCK_TIME_NONE.
* check/gst/gstpipeline.c (test_base_time): Punt around the
problem of the probe not being called, because that's not the
issue I'm looking at. Add a check that setting stream_time to NONE
disables base time management.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): Punt around the
problem of the probe not being called, because that's not the
issue I'm looking at...
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): Add check that the
base time and stream time are reset correctly.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): New test for buffer
timestamps with live capture.
* gst/elements/gstfakesrc.c (gst_fake_src_create): If the datarate
is 0 but we are a live source, timestamp the buffers using the
element's clock.
Original commit message from CVS:
2005-11-10 Andy Wingo <wingo@pobox.com>
* check/gst/gstbin.c (test_message_state_changed_children): Style
fix..
* gst/gstbus.c (poll_destroy, poll_func, gst_bus_poll): Implement
gst_bus_poll with the signal watch. Ensures that poll and a signal
watch see the same messages.
* check/gst/gstbus.c (test_watch_with_poll): New test, checks that
a poll and a watch at the same time get the same messages.
Original commit message from CVS:
patch by: Tim-Philipp Müller <tim at centricular dot net>
* gst/gststructure.c: (gst_structure_parse_field),
(gst_structure_from_string):
Forward-port a 0.8 patch to handle escaped spaces in structure string, so that gst_parse_launch() can deal with spaces in filtered link
caps (fixes#164479)
* check/gst/capslist.h:
* check/gst/gststructure.c: (GST_START_TEST):
add unit tests for this change
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added check for bug #317341
* gst/gstbuffer.c:
* gst/gstbuffer.h:
Some more spiffifying.
* gst/gstghostpad.c: (gst_ghost_pad_do_link):
Call peer linkfunction if we are a source pad. Totally fixes
#317341
* gst/gstpad.c:
Update docs, source pads should call the peer linkfunction
so they can atomically perform the pad link.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST):
Uncomment fixed check.
* docs/design/part-TODO.txt:
Updated TODO.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
If we are going to PLAYING, post the right pending state
when we post the intermediate paused message.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state):
Don't post state changes that were between the same state
and were not ASYNC.
Original commit message from CVS:
2005-11-03 Andy Wingo <wingo@pobox.com>
* check/states/sinks.c (test_livesrc_sink): Add checks that the
state-changed messages actually have the right order and the right
values.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
Added some more checks. Specifically the case where NO_PREROLL
elements are in the pipeline.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
Post READY->PAUSED state change messages too.
Fix bug where VOID was posted as pending state...
* gst/gstbin.c: (gst_bin_recalc_state):
use _element_continue_state() to continue the state change.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_commit_state), (gst_element_set_state_func),
(gst_element_change_state), (gst_element_change_state_func):
Lots of state change cleanups, assign the STATE_RETURN in
a new continue_state() function that also propagates the
last return value from a state change to the app.
Update some debug statements with proper category.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
An extra refcount is taken in basesrc.
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop):
Small cleanups, check for flushing after being unlocked from the
LIVE_LOCK. take refcounts correctly (not yet everywhere).
Don't send out EOS when going to READY.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstghostpad.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (GST_START_TEST):
wait on thread to die so we can check refcount correctly
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_recalc_func),
(bin_bus_handler):
* gst/gstelement.c: (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_state_dirty), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_duration),
(gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Seriously, this is better than a previous commit as we only need
to notify the fact that an element changed state in a streaming
thread, marking the state of the parents dirty, hence the
STATE_DIRTY message instead of abusing a boolean in a STATE_CHANGE
message.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (bin_bus_handler):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_segment_start), (gst_message_new_segment_done),
(gst_message_new_duration), (gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Make messages future proof.
state-change gets a flag if it was a message comming from the
streaming thread.
segment-start/stop can also be specified in other formats.
A message to notify an app that a pipeline changed playback
duration.
Also fix a GstMessage leak in -launch
Original commit message from CVS:
* gst/gstpluginfeature.c: (gst_plugin_feature_check_version):
* gst/gstpluginfeature.h:
* gst/gstregistry.c: (gst_default_registry_check_feature_version):
* gst/gstregistry.h:
* docs/gst/gstreamer-sections.txt:
Add new API to check plugin feature version requirements.
* check/gst/gstplugin.c: (test_version_checks), (gst_plugin_suite):
Some basic tests for the above.
Original commit message from CVS:
* check/Makefile.am:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
* check/states/sinks2.c:
Moved sinks2 testcode in sinks check.
* gst/gstbin.c: (gst_bin_provide_clock_func), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_recalc_state),
(gst_bin_change_state_func), (bin_bus_handler):
Fix potential race condition when _get_state() iterated over an
ASYNC element right before it posted a state completion.
* gst/gstclock.h:
Do proper cast here.
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
A playback rate of 0.0 is not allowed.
Original commit message from CVS:
* check/gst/gstevent.c: (GST_START_TEST):
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesrc.c: (gst_base_src_default_newsegment):
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Added extra flag to newsegment for future API freeze.
Updated check and base elements.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/states/sinks.c (test_src_sink): Cleanups from the state
change patch.
(test_livesrc_sink): Sync on the state.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Merge from
the state change patch.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/gst/gstghostpad.c (test_ghost_pads): Merge from the state
change patch.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/gst/gstbin.c: Merge in some style fixes and additional
checks from Wim's state change patch.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_parse_state_changed):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Added extra field to STATE_CHANGE message with the pending
state, which will be different from the new state soon.
Original commit message from CVS:
2005-10-07 Andy Wingo <wingo@pobox.com>
* check/elements/fakesrc.c (test_no_preroll): New check, checks
that setting a live fakesrc to PAUSED returns NO_PREROLL both
times.
* gst/base/gstbasesrc.c (gst_base_src_change_state): Allow a
NO_PREROLL from gst_element_change_state to fall through.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_link_pads):
fix a bug in the case where neither element has a pad
* check/gst/gstelement.c: (GST_START_TEST), (gst_element_suite):
add a test for that case
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_push), (gst_pad_push_event):
emit have-data before checking for peers. This allows
for probe handlers to connect elements. This helps autopluggers.
* check/gst/gstpad.c: (GST_START_TEST), (_probe_handler),
(gst_pad_suite):
add six checks, linked/unlinked with no/true/false probe
Original commit message from CVS:
* check/gst/gstbin.c:
* check/states/sinks.c:
fix tests for the new warning
* check/gst/gstpipeline.c:
add a test for pipeline and bus interaction
* gst/gstelement.c:
elements should be NULL if they get disposed; add a warning if not
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Change for new bus API.
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
Change for new bus signal API.
* gst/gstbus.c: (gst_bus_class_init), (gst_bus_have_pending),
(gst_bus_source_prepare), (gst_bus_source_check),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (gst_bus_poll), (gst_bus_async_signal_func),
(gst_bus_sync_signal_handler), (gst_bus_add_signal_watch):
* gst/gstbus.h:
Remove support for multiple GSources operating on different
message types as it is too complex and unneeded when using
signals.
Added support for receiving signals from the bus.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_do_simplify):
Thou shalt not free a structure and then continue using it
in the next loop iteration.
* check/gst/gstcaps.c: (check_fourcc_list), (test_simplify),
(gst_caps_suite):
Add test case for caps simplification.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Add bus to bin.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(add_to_queue), (clear_queue), (reset_degree), (update_degree),
(find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state), (gst_bin_dispose):
A bin does not have a bus, it gets the bus from the parent.
* gst/gstelement.c: (gst_element_requires_clock),
(gst_element_provides_clock), (gst_element_is_indexable),
(gst_element_is_locked_state), (gst_element_change_state),
(gst_element_set_bus_func):
Small cleanups.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_init), (gst_pipeline_provide_clock_func):
The pipeline provides a bus.
Original commit message from CVS:
* check/gst/gstpipeline.c: (GST_START_TEST), (gst_pipeline_suite):
add another check
* gst/gstbus.c:
add some doc
* gst/gstinfo.c: (_gst_debug_init):
slightly more readable color for refcount debugging
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Enable check that works now.
* gst/gstbin.c: (add_to_queue), (clear_queue), (reset_outdegree),
(update_outdegree), (find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state):
* gst/gstbin.h:
Redid the state change algorithm using a topological sort algo.
Handles all cases correctly.
Exposed iterator for state change order.
* gst/gstelement.h:
Temp storage for state changes. Need to get rid of this soon.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_subbuffer_init):
Set READONLY flag on subbuffers, so that gst_buffer_make_writable()
works correctly in all circumstances (we could have just copied
the parent buffer's readonly flag, but conceptually it seems
cleaner to mark all subbuffers as read-only). (based on patch
by Alessandro Decina, #314710).
* check/gst/gstbuffer.c: (create_read_only_buffer),
(test_make_writable), (test_subbuffer_make_writable),
(gst_test_suite):
Add some tests for gst_buffer_make_writable().
Original commit message from CVS:
* check/gst/gstbin.c: (test_children_state_change_order_flagged_sink),
(test_children_state_change_order_semi_sink):
Fix test case: we can't rely on a fixed state change order when
going from READY => PAUSED because the sink might commit its
new state first when the first buffer created by the source
reaches the sink before the source has finished its change state.
(Test case still fails at times, see #316856, comment 5 onwards)
Original commit message from CVS:
* check/gst/gstbin.c: (test_children_state_change_order_flagged_sink),
(test_children_state_change_order_semi_sink), (gst_bin_suite):
Added test to check state change order in bins (can still be made
to fail here under heavy disk load; bails out with 'Push on pad
fakesink:sink0, but it was not activated in push mode').
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_change_state):
Fix state change order when there is only a semi sink (#316856)
* gst/gstbus.c: (gst_bus_class_init):
Use _class_peek_parent(), not _class_ref(); fix docs to say
'default main context' instead of 'mainloop' where that is
what's meant.
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_set_state):
Fix typos in debug messages
Original commit message from CVS:
* check/gst/gstvalue.c: (test_date), (gst_value_suite):
Add simplistic test suite for GST_TYPE_DATE serialisation and
deserialisation.
Original commit message from CVS:
2005-09-22 Andy Wingo <wingo@pobox.com>
* gst/gstbuffer.c (gst_buffer_get_caps): Like all our _get
accessors returning refcounted objects, return a ref.
* check/gst/gstbuffer.c (GST_START_TEST): Use refcount-idempotent
accessor for caps. IDEMPOTENCE. Oh yes.
