Never skip the state change to playing, even if the element is already in the
right state. We need this because we also distribute the base_time while doing
the state change and skipping this step would leave some elements without a new
base_time.
Fixes#600313
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
Post the structure change messages on the sinkpads of the elements. This allows
us to catch unlinked pads earlier without ending up with inconsistent element
degrees.
When we detect a pad unlink in progress, we will not be updating the degree of
the parent element. This can cause false loop detected warnings because the
degree counter is invalid. Handle this case by marking the iterator as 'dirty'
when we detect a pad unlink and avoid emiting the warning in this case. We have
to continue our state change as good as we can, we will eventually resync when
the pad unlink completed.
When an element is added to the bin, only set the index if we have a
cached index, rather than setting a NULL index on elements that might
have a default index object of their own.
Cache the last index that was set with _set_index() and return this in the
_get_index() call.
Set the cached index on newly added elements.
Fixes#566881
When we get an ASYNC_DONE message when a state change was busy, set the
pending_async_done flag so that after the state change completes, the bin can
check if all async elements are finished. Don't only do this for the bin itself
but for all elements.
This fixes some bins in bins that simulate async state changes by posting ASYNC
messages (such as sdpparse in uridecodebin/playbin2).
Bin collects segment-start messages and segent-done messages. it posts a
segment-done message to its parent, once it has received a segment-done for
each segment-start. Imho it should also send a segment-start if it receives the
first segment start and if parent is !=NULL. This is needed for bins in bins,
so that also higher order bins can group segment-starts and segment-dones.
Right now higher order bins will post a segment-done for each segment-done
received.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_set_index_func), (gst_bin_set_clock_func),
(gst_bin_change_state_func):
Use an iterator to set the clock and the index so that we can release
the object lock appropriately. Fixes#566393.
Original commit message from CVS:
* gst/gstbin.c: (_gst_boolean_accumulator), (gst_bin_class_init),
(gst_bin_recalculate_latency), (gst_bin_do_latency_func),
(gst_bin_change_state_func):
* gst/gstbin.h:
Add do-latency signal with the old default fallback implementation. This
allows for custom latency calculations for when the default is not
sufficient.
API: GstBin::do-latency signal.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c: (gst_bin_recalculate_latency),
(gst_bin_change_state_func):
* gst/gstbin.h:
Add method to recalculate and redistribute the latency on a bin.
API: gst_bin_recalculate_latency().
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_start),
(gst_bin_handle_message_func), (gst_bin_query):
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Copy seqnums from events to messages so that they can all be related
back to eachother.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes#510354.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
Take the (recursive) state lock between getting the locked state of an
element and changing the element state. This allows the application to
lock an element's state and then change its state without races.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
When an element is in the locked state we still want to update the
base_time of the element.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_handle_async_done),
(gst_bin_handle_message_func):
Fix race for bins that simulate ASYNC state changes by inserting
ASYNC_START and ASYNC_DONE messages in their bus. We need to check for
pending ASYNC messages even when the bin does not have ASYNC children.
We note detect this behaviour because we will receive an ASYNC message
that is originating from the bin itself.
Fixes races with decodebin2 state changes.
* tests/check/gst/gstbin.c: (GST_START_TEST):
Add some more debug.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/gstreamer.types.in:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_index_func):
* gst/gstconfig.h.in:
* gst/gstelement.c: (gst_element_get_index):
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature),
(gst_registry_binary_read_cache):
* gst/gstregistryxml.c: (load_feature),
(gst_registry_xml_read_cache), (gst_registry_xml_save_feature):
* plugins/Makefile.am:
* tools/gst-indent:
* tools/gst-inspect.c: (print_index_info), (print_element_list),
(print_plugin_features), (print_element_features):
* tools/gst-xmlinspect.c: (print_event_masks),
(print_element_info):
* win32/common/gstconfig.h:
Remove GST_DISABLE_(ENUMTYPES|INDEX|URI) everywhere.
Disabling the indexers and URI handler code will only reduce the
required amount of memory by a very small amount but on the other hand
requires much more maintaince work. Apart from that many places of
code are broken when disabling them.
Disabling the enum types doesn't reduce the required amount of memory
by more than a few bytes and makes it hard to fix bugs like #539772,
i.e. use the enums as GObject properties.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_dispose):
Use the GLib stuff to create a private structure.
Add some locking around some dispose methods to make them a little
safer, see #529723. Patch by: Antoine Tremblay <hexa00 at gmail dot com>
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Move GParamSepc macros to standart section.
* gst/gstbin.c:
Dn't document _get_type - its in private section in docs anyway and
this doc-blob was incomplete.
* gst/gstclock.h:
Fix wrong symbol names in docs.
* gst/gstmacros.h:
Add once doc sentence.
* tests/check/gst/.cvsignore:
Ignore more.
Original commit message from CVS:
* docs/random/ensonic/profiling.txt:
More ideas.
* gst/gstbin.c:
Fix typo and give better log output.
* gst/gstdebugutils.c:
* gst/gstdebugutils.h:
More ideas, make graphs a bit smaller and fix param name in macro.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (gst_bin_continue_func):
Change email, cleanups add some more debug and comments.
Also set bus and clock on new elements when the pipeline was in error.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_done):
Correctly set the next state if all of our async children commited their
state. This makes sure we can actually cancel the state change in
progress. Fixes a regression in Rhythmbox when seeking.
Original commit message from CVS:
* gst/gstbin.c: (remove_from_queue):
Work around a problem with pipelines containing (semi)loops until a
proper, more complicated solution is ready. See #475455.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_latency_fold), (gst_bin_query):
A latency query fails when one of the sinks fail.
* gst/gstelement.c: (gst_element_set_base_time):
Improve debugging.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (clear_queue),
(do_bin_latency), (gst_bin_change_state_func):
* gst/gstpipeline.c: (gst_pipeline_change_state):
Move latency query from GstPipeline to GstBin so that we can also
use it when async-handling is enabled on bins.
Original commit message from CVS:
* gst/gstbin.c: (is_eos), (gst_bin_add_func),
(bin_handle_async_start), (gst_bin_handle_message_func):
Improve debugging.
When adding elements, insert messages into the bus of the newly added
element and make sure the element is the source of the message. This
allows the parent bin to intercept the message and do the
right thing. It also avoids us posting ASYNC_START and CLOCK_PROVIDE
messages to the app (which is not allowed).
Update some docs.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix testsuite so that is does not work around messages that should not
have been posted in the first place.
Original commit message from CVS:
* gst/gstbin.c: (add_to_queue), (remove_from_queue), (clear_queue),
(update_degree), (gst_bin_sort_iterator_next):
Fix annoying bug in the sorted iterator where a sink that is not really
a sink (when it has downstream links) screwed up the iterator.
* tests/check/gst/gstbin.c: (GST_START_TEST), (gst_bin_suite):
Unit test to verify the fix.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_element_set_state),
(bin_handle_async_start), (gst_bin_handle_message_func):
Move ASYNC_START message posting to where it belongs, similar to
async_done.
Don't post ASYNC_START when we are in error.
Post ASYNC_START when we added an async element to a bin.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
Always change the state of a NO_PREROLL element even if it has ASYNC
elements inside (in case of a bin).
* tests/check/generic/sinks.c: (GST_START_TEST), (gst_sinks_suite):
Unit test for this case.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Add some more TODO items
* gst/gstbin.c: (find_message), (gst_bin_change_state_func):
Improve debugging.
* gst/gstcaps.c: (gst_caps_intersect):
Optimize trivial intersection case between identical caps pointers.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func):
* gst/gstpad.c:
Fix spelling and grammar mistakes.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_change_state_func),
(bin_handle_async_done), (gst_bin_handle_message_func):
Don't forget about the fact that some element went ASYNC even after a
resync. This makes us post the ASYNC_DONE message correctly.
Fixes#462558.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_continue_func):
Check that the state_cookie hasn't changed since the continue_func
was scheduled. Avoids problems where the state changes back to
something it shouldn't be because it was changed in the meantime.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_push_state_continue),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Move the common code for posting state-change messages into
one function.
Broadcast the state signal after we posted the messages.
Mark the bin as busy when it's doing a state-change.
Make sure async-start/done messages don't interfere with the bin's
state when it's busy.
After the state change, let the bin check which elements completed the
state change while it was busy so that it can update its state.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_continue_func),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
* gst/gstbin.h:
Immediatly commit the toplevel bin state when receiving an async-done
message. This enables us to avoid spawning a thread to commit the state
in some common cases and it also avoids some races.
Avoid spawning a state thread when adding/removing async elements to a
toplevel bin. Instead we immediatly update the bin state.
Get rid of iterating all the children when getting the state in the bin
because it is now always up-to-date.
Fix bug where locked elements would always return _SUCCESS even it they
returned NO_PREROLL before being locked.
Fix the order of the state_change, async-start/done messages that was
sometimes incorrect.
Mark the state_dirty field as deprecated, we don't need it anymore as we
are always up-to-date.
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_continue_state):
Small debug inprovements.
Return the previous element state return when nothing is pending instead
of blindly returning SUCCESS.
* tests/check/generic/sinks.c: (GST_START_TEST), (pad_blocked_cb),
(gst_sinks_suite):
Add a whole bunch of new testcases.
Original commit message from CVS:
* gst/gstbin.c: (find_message), (bin_replace_message), (is_eos),
(gst_bin_remove_func), (gst_bin_element_set_state),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Add helper function to find messages.
Generate the async-done messages together with the state change
messages.
Small cleanups in handling toplevel bins.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_done):
Make sure that the child bin stops after completing the async state
change so that the parent can continue the state change to PLAYING.
Fixes#441159.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_get_state_func),
(gst_bin_continue_func):
Enable latency for next release.
Restore STATE_LOCK around recalc_state that was left out during the
rewrite and could result in racy behaviour when _get_state and
recalc_state are run concurrently. See #440463.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_dispose),
(gst_bin_set_property), (gst_bin_get_property),
(gst_bin_remove_func), (gst_bin_handle_message_func):
* gst/gstbin.h:
'private' is a c++ keyword, let's not use that in header files,
otherwise c++ compilers will throw a tantrum.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_dispose), (gst_bin_set_property), (gst_bin_get_property),
(gst_bin_remove_func), (gst_bin_handle_message_func):
* gst/gstbin.h:
Add a property for bins that handle the state change of their childs.
Fixes#435880
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_element_set_state):
Prepare for release where we warn against possible app breakage in the
case of live pipelines along with an env var to enable/disable live
preroll mode (GST_COMPAT=[no-]live-preroll).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* gst/gstbin.c:(gst_bin_add):
Use GST_STR_NULL to prevent NULL pointer to be passed to GST_CAT_DEBUG.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_min_max_init), (bin_query_latency_fold),
(bin_query_latency_done):
Also report the live parameter of a latency query.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
add new API and fix the build
* gst/gstbin.c: (gst_bin_recalc_state):
* gst/gstelement.c: (gst_element_message_full),
(gst_element_get_state_func), (gst_element_set_state_func):
use new API and improve logging
* gst/gstutils.c: (gst_element_state_change_return_get_name):
* gst/gstutils.h:
API: add function to get StateChangereturn names to improve logs
Original commit message from CVS:
2006-10-06 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/gst.c: (gst_init_get_option_group):
Fix empty declaration and type mismatch.
* gst/gstbin.c: (gst_bin_change_state_func):
Fix type mismatch.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state),
(gst_element_change_state_func):
Fix type mismatches.
* gst/gstinfo.c: (gst_debug_compare_log_function_by_func),
(gst_debug_remove_log_function), (_gst_debug_nameof_funcptr):
Cast as appropriate.
* gst/gstobject.c: (gst_class_signal_connect):
Cast as appropriate. The function pointer parameter really
has the wrong type but would break API if we change it.
* gst/gstquery.c:
Fix redefinition of _FILE_OFFSET_BITS caused on Solaris wrt
order of including string.h.
* gst/gstutils.c: (gst_element_state_get_name):
Remove unreachable line.
* gst/gstxml.c: (gst_xml_parse_doc):
Fix type mismatch.
All these caught by Forte.
Original commit message from CVS:
* gst/gstbin.c:
Update documentation.
* gst/gstelement.c: (gst_element_class_init),
(gst_element_release_request_pad), (gst_element_set_clock),
(gst_element_get_index), (gst_element_add_pad),
(gst_element_remove_pad), (gst_element_get_random_pad),
(gst_element_send_event), (gst_element_get_query_types),
(gst_element_query), (gst_element_post_message),
(gst_element_message_full), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_save_thyself),
(gst_element_restore_thyself):
Documentation updates.
Rename last bit of the new-pad -> pad-added signal rename.
Fix the case where an element query would only work if the source
pad was linked.
Avoid some useless type checking in message handling.
* gst/gstevent.c:
* gst/gstevent.h:
* gst/gstutils.c:
Documentation updates.
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/gstbin.c: (compare_interface), (gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Can't use GPOINTER_TO_INT and GINT_TO_POINTER with GTypes.
GTypes are gulongs and thus the top 4 bytes might be cut
off on some platforms when doing GPOINTER_TO_INT, leading
to invalid GTypes and bad things happening.
Also add a check to make sure the type passed in is really
an interface type.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_restore_thyself):
* gst/gstxml.c: (gst_xml_make_element):
Fix deserialisation from XML. Set parent manually
instead of using gst_bin_add(), since gst_bin_add()
will unlink all pads of the element being added.
Fixes#341667.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_duration_done), (gst_bin_query):
Make it clear with a FIXME and a real define what the #if 0
previously disabled.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic at sonicpulse dot de>
* gst/gstbin.c: (gst_bin_handle_message_func):
Update docs.
Don't leak bin refcount when a state recalc is
in progress and we delay another one #339808.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_handle_message_func),
(bin_query_max_init), (bin_query_position_fold),
(bin_query_position_done), (gst_bin_query):
Position query should also take max of all streams.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* docs/random/release:
Move the current documentation of how to do a release to the top
of the file.
* gst/gstbin.c: (gst_bin_class_init),
(gst_bin_handle_message_func):
Allow multiple state-recalculation threads. (Closes#328873)
Original commit message from CVS:
* gst/gstbin.c: (bin_remove_messages), (bin_query_duration_done):
Don't cache duration messages if we're not going to use or
free them.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_dispose), (gst_bin_provide_clock_func),
(gst_bin_remove_func), (gst_bin_handle_message_func),
(bin_query_duration_fold), (bin_query_generic_fold):
Clean up references to the clock provider when disposed or when
handling a clock-lost message from it.
Unref sinks when performing a query via gst_iterator_fold, as the
gst_bin_iterate_sinks iterator refs each item. (Fixes#323874)
* gst/gstclock.c: (gst_clock_class_init), (gst_clock_dispose),
(gst_clock_set_master):
Drop our reference to the master clock, if any, when we are disposed.
* gst/gsttypefindfactory.c: (gst_type_find_factory_dispose):
Chain up in dispose.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_dispose):
Guard gst_object_unref call against a NULL object (dispose
can theoretically be called multiple times).
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
* gst/gstclock.c: (gst_clock_id_wait):
Added some more debug info.
* libs/gst/base/gstadapter.c:
Added more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_chain):
Added some comments.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_wait), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
No need to store the clock, the parent element class already
has it.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_add_func):
Updates for clock_set returning a gboolean
* gst/gstclock.c: (gst_clock_entry_new), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_class_init),
(gst_clock_init), (gst_clock_finalize),
(gst_clock_get_internal_time), (gst_clock_get_time),
(gst_clock_slave_callback), (gst_clock_set_master),
(gst_clock_get_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property),
(gst_clock_get_property):
* gst/gstclock.h:
Implement master/slave. When setting a clock as a slave, a
periodic timeout is scheduled to sample master and slave times.
Then the slave clock is recalibrated to match offset and rate
of the master clock.
Update logging a bit.
Add flag so that a clock can state that is cannot be slaved to
another clock.
* gst/gstelement.c: (gst_element_set_clock):
* gst/gstelement.h:
The set_clock returns a gboolean for when an element cannot
deal with the selected clock in the pipeline.
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_set_clock):
* gst/gstpipeline.h:
Handle the case where the selected clock cannot be set on
the pipeline.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_class_init),
(gst_net_client_clock_init), (gst_net_client_clock_finalize),
(gst_net_client_clock_set_property),
(gst_net_client_clock_get_property),
(gst_net_client_clock_observe_times):
* gst/net/gstnetclientclock.h:
Use regression code in GstClock parent, remove duplicated
functionality.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (gst_bin_remove_func): Wim claims I can remove this
state_broadcast call.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_provide_clock_func), (gst_bin_add_func),
(gst_bin_remove_func), (bin_bus_handler):
* gst/gstbin.h:
Removing a clock provider from a bin, triggers a clock lost message
so that a new clock will be selected.
Adding a clock to a bin triggers a clock provider message.
Make sure we reselect a clock when we received a clock lost message.
Keep a reference to the element that provided the clock.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_dispose), (gst_bin_provide_clock_func),
(gst_bin_sort_iterator_new), (gst_bin_iterate_sorted):
Refactor the sort iterator so it can be used while holding the
LOCK too.
Make clock selection select a clock closest to the source.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
Added some more checks. Specifically the case where NO_PREROLL
elements are in the pipeline.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
Post READY->PAUSED state change messages too.
Fix bug where VOID was posted as pending state...
* gst/gstbin.c: (gst_bin_recalc_state):
use _element_continue_state() to continue the state change.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_commit_state), (gst_element_set_state_func),
(gst_element_change_state), (gst_element_change_state_func):
Lots of state change cleanups, assign the STATE_RETURN in
a new continue_state() function that also propagates the
last return value from a state change to the app.
Update some debug statements with proper category.
Original commit message from CVS:
* gst/gstbin.c:
Fix typo in docs.
* gst/gstelement.c: (gst_element_commit_state):
Remove unused value.
* gst/gstiterator.c:
Mention that the returned element is reffed in the docs.
Original commit message from CVS:
* docs/README:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c:
doc updates
* gst/gstregistry.c: (gst_registry_scan_path_level):
fix for a nasty little missed situation where an installed plug-in
which was in the cache did not get overridden by an uninstalled one
which was earlier in the plugin path because the newly created plugin
for the uninstalled one (not in the registry) didn't get its
->registered set to TRUE
Original commit message from CVS:
* gst/gstbin.c: (message_check), (bin_replace_message),
(bin_remove_messages), (is_eos), (gst_bin_add_func),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_change_state_func), (gst_bin_dispose), (bin_bus_handler):
Reworked the message handling a bit, cache the messages instead of
only the senders. alows us to do more in the future.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_recalc_func),
(bin_bus_handler):
* gst/gstelement.c: (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_state_dirty), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_duration),
(gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Seriously, this is better than a previous commit as we only need
to notify the fact that an element changed state in a streaming
thread, marking the state of the parents dirty, hence the
STATE_DIRTY message instead of abusing a boolean in a STATE_CHANGE
message.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (bin_bus_handler):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_segment_start), (gst_message_new_segment_done),
(gst_message_new_duration), (gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Make messages future proof.
state-change gets a flag if it was a message comming from the
streaming thread.
segment-start/stop can also be specified in other formats.
A message to notify an app that a pipeline changed playback
duration.
Also fix a GstMessage leak in -launch
Original commit message from CVS:
* check/Makefile.am:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
* check/states/sinks2.c:
Moved sinks2 testcode in sinks check.
* gst/gstbin.c: (gst_bin_provide_clock_func), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_recalc_state),
(gst_bin_change_state_func), (bin_bus_handler):
Fix potential race condition when _get_state() iterated over an
ASYNC element right before it posted a state completion.
* gst/gstclock.h:
Do proper cast here.
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
A playback rate of 0.0 is not allowed.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_provide_clock_func),
(is_eos), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_change_state_func),
(gst_bin_dispose), (bin_bus_handler):
* gst/gstbin.h:
Prepare to make current EOS message queue more generic.
Fix some typos.
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Rename base to stream_time.
* gst/gstmessage.h:
Fix typo in docs.
Original commit message from CVS:
* docs/design/part-states.txt:
Some more docs.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_recalc_state),
(gst_bin_change_state_func), (bin_bus_handler):
Doc updates. Don't distribute the same clock over and over again.
* gst/gstclock.c:
* gst/gstclock.h:
Doc updates.
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark),
(gst_pad_get_type), (gst_pad_push), (gst_pad_push_event),
(gst_pad_send_event):
* gst/gstpad.h:
Make probe emission threadsafe again.
Register quarks and move _get_name() from utils.
Doc updates.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_change_state), (gst_pipeline_provide_clock_func):
Only redistribute the clock of it changed.
* gst/gstsystemclock.h:
Doc updates.
* gst/gstutils.c:
* gst/gstutils.h:
Moved the _flow_get_name() to GstPad.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/gstbin.c: (gst_bin_iterate_sorted):
Pass GType and size arguments to gst_iterator_new() in the right
order (maybe we should make _new() take the GType as first argument
just like _new_list()?) (#318447).
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (gst_bin_get_state_func): Renamed from
gst_bin_get_state, cleaned up (but no logic changes).
(bin_element_is_sink): Comment updates.
(sink_iterator_filter): Remove needless cast.
(gst_bin_iterate_sinks): Doc update.
(gst_bin_change_state_func): Renamed from gst_bin_change_state,
cleaned up (but no logic changes).
Original commit message from CVS:
* gst/gstbin.c: (is_eos), (update_degree), (gst_bin_change_state),
(gst_bin_dispose), (bin_bus_handler):
Fix typos, add comments.
Clear EOS list when going to PAUSED from any direction and do it
in a threadsafe way.
Get base time in a threadsafe way too.
Fix confusing debug in the change_state function.
Various other mall cleanups.
* gst/gstelement.c: (gst_element_post_message):
Fix very verbose bus posting code.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_set_property), (gst_pipeline_get_property),
(gst_pipeline_change_state):
Small ARG_ -> PROP_ cleanup
Original commit message from CVS:
* gst/gst.c: (init_pre):
* gst/gstbin.c: (gst_bin_add_func):
log distributing clocks and base time
* gst/gstregistry.c: (gst_registry_add_plugin),
(gst_registry_scan_path_level), (gst_registry_scan_path):
clean up the debugging output a little
* gst/gstutils.c: (gst_element_state_get_name):
warn about a memleak (I've actually seen this be used, though
it was probably a bug)
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_change_state):
Only error is an error.
* gst/gstbin.c: (gst_bin_change_state):
Better debugging.
* gst/gstpad.c: (gst_pad_alloc_buffer), (gst_pad_chain):
Also call pad_block in pad alloc.
* gst/gstutils.c: (gst_flow_get_name):
Better debugging.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Add bus to bin.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(add_to_queue), (clear_queue), (reset_degree), (update_degree),
(find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state), (gst_bin_dispose):
A bin does not have a bus, it gets the bus from the parent.
* gst/gstelement.c: (gst_element_requires_clock),
(gst_element_provides_clock), (gst_element_is_indexable),
(gst_element_is_locked_state), (gst_element_change_state),
(gst_element_set_bus_func):
Small cleanups.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_init), (gst_pipeline_provide_clock_func):
The pipeline provides a bus.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Update TODO.
* gst/gstbin.c: (add_to_queue), (clear_queue), (reset_outdegree),
(update_outdegree), (find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state):
* gst/gstelement.h:
Remove element variable, we keep element info in the iterator now.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Enable check that works now.
* gst/gstbin.c: (add_to_queue), (clear_queue), (reset_outdegree),
(update_outdegree), (find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state):
* gst/gstbin.h:
Redid the state change algorithm using a topological sort algo.
Handles all cases correctly.
Exposed iterator for state change order.
* gst/gstelement.h:
Temp storage for state changes. Need to get rid of this soon.
Original commit message from CVS:
* gst/gstbin.c: (bin_element_is_semi_sink), (gst_bin_change_state):
use gst_object_has_ancestor().
* gst/gstobject.c: (gst_object_has_ancestor):
* gst/gstobject.h:
gst_object_has_ancestor() copied from gstbin.c as it is a
usefull function.
* tests/instantiate/create.c: (create_all_elements):
* tests/lat.c: (handoff_src), (handoff_sink):
* tests/sched/runxml.c: (main):
* tests/seeking/seeking1.c: (main):
* tests/threadstate/threadstate2.c: (bus_handler), (timeout_func),
(main):
Fix compilation of some tests.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_change_state):
Make state change function use 3 queues again, we were
adding elements in the wrong order.
* gst/gstghostpad.c: (gst_ghost_pad_do_unlink):
Some debug info,
* gst/gstpad.c: (gst_pad_dispose):
Added some debug info first.
Original commit message from CVS:
* check/gst/gstbin.c: (test_children_state_change_order_flagged_sink),
(test_children_state_change_order_semi_sink), (gst_bin_suite):
Added test to check state change order in bins (can still be made
to fail here under heavy disk load; bails out with 'Push on pad
fakesink:sink0, but it was not activated in push mode').
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_change_state):
Fix state change order when there is only a semi sink (#316856)
* gst/gstbus.c: (gst_bus_class_init):
Use _class_peek_parent(), not _class_ref(); fix docs to say
'default main context' instead of 'mainloop' where that is
what's meant.
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_set_state):
Fix typos in debug messages
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func):
Some more debug info.
* gst/gstelement.c: (gst_element_send_event):
Simplify send_event
* gst/gstelement.h:
Don't know how flags got broken.
* gst/gstquery.h:
Added new query.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* gst/gstbin.c: (bin_bus_handler):
Be a bit more conservative about the posted message.
* gst/gstbus.c: (gst_bus_post):
Some cleanups, warn wrong return values.
Original commit message from CVS:
* docs/pwg/advanced-types.xml:
Well done to Michael for catching my deliberate introduction
of this spelling mistake.
* gst/gstbin.c: (gst_bin_remove_func), (bin_bus_handler):
* gst/gstelement.h:
Add GST_ELEMENT_UNPARENTING to prevent races so that we can
unlink pads before removing the element from the bin.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* gst/gstbin.c: (bin_bus_handler):
* gst/gstmessage.c: (gst_message_finalize), (_gst_message_copy),
(gst_message_new), (gst_message_new_eos), (gst_message_new_error),
(gst_message_new_warning), (gst_message_new_tag),
(gst_message_new_state_changed), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_custom):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
Change GST_MESSAGE_SRC to be a GObject rather than a GstObject, so
that applications can sensibly post custom messages with references
to their own objects.
Original commit message from CVS:
* check/Makefile.am:
clean up environment for when registry gets built versus
when actual tests are run; valgrind seems to not report
leaks if GST_PLUGIN_PATH is set to some specific values
* check/gst/gstbin.c: (GST_START_TEST):
add more refcounting checks; maybe this exposes a
preroll lock bug ?
* common/check.mak:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/check/gstcheck.h:
* gst/gstbin.c: (bin_element_is_semi_sink), (gst_bin_get_state),
(gst_bin_change_state):
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_chain):
add/fix debugging/whitespace
Original commit message from CVS:
2005-08-17 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasetransform.c: Debug changes.
* gst/gstutils.h:
* gst/gstutils.c (gst_bin_watch_for_state_change): Add function to
ensure bins post state change messages. A bit of a hack but I can't
think of a way to avoid it.
* check/gst/gstbin.c (test_watch_for_state_change): Added test.
Original commit message from CVS:
* gst/gstbin.c: (bin_bus_handler):
Make default message forwarding from child->bus to bin->bus
threadsafe and make it not emit warnings if the parent has no bus.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Small update.
* gst/gstbin.c: (unlink_pads), (gst_bin_add_func),
(gst_bin_remove_func):
Unlinking pads while holding the bin LOCK is not a good
idea.
* gst/gstpad.c: (gst_pad_class_init),
(gst_pad_link_check_hierarchy), (gst_pad_get_caps_unlocked),
(gst_pad_accept_caps), (gst_pad_set_caps), (gst_pad_send_event):
No prob setting template after creating the pad.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST), (gst_bin_suite):
Added checks for hierarchy consistency whan adding linked
elements to bins.
* check/gst/gstelement.c: (GST_START_TEST), (gst_element_suite):
Added check to test element scheduling without bin/pipeline.
* check/pipelines/simple_launch_lines.c: (GST_START_TEST):
First add elements to bin, then link.
* gst/gstbin.c: (unlink_pads), (gst_bin_add_func),
(gst_bin_remove_func):
Unlink pads from elements added/removed from bin to maintain
hierarchy consistency.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added some more tests for wrong hierarchy
* docs/design/part-overview.txt:
Some updates.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_dispose):
Cleanups.
* gst/gstelement.c: (gst_element_remove_pad), (gst_element_seek),
(gst_element_dispose):
Some more cleanups.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_check_hierarchy), (gst_pad_link_prepare),
(gst_pad_get_caps_unlocked), (gst_pad_accept_caps),
(gst_pad_set_caps), (gst_pad_send_event):
Check for correct hierarchy when linking pads. Moving to
strict requirement for ghostpads when linking elements in
different bins.
* gst/gstpad.h:
Clean ups. Added WRONG_HIERARCHY return value.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_loop),
(gst_base_src_activate_push):
Send discont event from the loop function, as pads
aren't activated yet in the activate_push handler.
* gst/gstbin.c: (bin_bus_handler):
Don't leak element name.
Original commit message from CVS:
Removed plugable schedulers.
Removed Scheduler/Manager from elements.
Removed gsttypes.h, rearranged includes.
Removed dependency pad<->element, element<>pipeline, and
various others, fix includes.
implement gst_pad_get_parent() with gst_object_get_parent()
Make GstTask sefcontained.
Fix _get_state() on GstBin, it did not return ASYNC with a 0
timeout.
Fix endless loop in iterator_fold_with_resync.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_get_times),
(gst_base_sink_do_sync), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Store and use discont values when syncing buffers as described
in design docs.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_push):
Push discont event when starting.
* gst/elements/gstidentity.c: (gst_identity_transform):
Small cleanups.
* gst/gstbin.c: (gst_bin_change_state):
Small cleanups in base_time distribution.
* gst/gstelement.c: (gst_element_set_base_time),
(gst_element_get_base_time), (gst_element_change_state):
* gst/gstelement.h:
Added methods for the base_time of the element.
Some MT fixes.
* gst/gstpipeline.c: (gst_pipeline_send_event),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time),
(gst_pipeline_get_last_stream_time):
* gst/gstpipeline.h:
MT fixes.
Handle seeking as described in design doc, remove stream_time
hack.
Cleanups clock and stream_time selection code. Added accessors
for the stream_time.
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST),
(gst_bin_suite):
add more things to check
* gst/gstbin.c: (gst_bin_change_state), (bin_bus_handler):
* gst/gstelement.c:
more debug
Original commit message from CVS:
* check/gst/gstbin.c: (START_TEST), (gst_bin_suite):
add test for state change message on a bin
* check/gst/gstelement.c: (START_TEST), (gst_element_suite):
add another test
* gst/gstbin.c: (gst_bin_init):
* gst/gstbus.c: (gst_bus_init), (gst_bus_post):
* gst/gstelement.c: (gst_element_post_message),
(gst_element_set_state):
* gst/gstelementfactory.c: (gst_element_factory_create):
* gst/gstmessage.c: (gst_message_new):
* gst/gstscheduler.c:
various debugging additions and cleanups
Original commit message from CVS:
* examples/Makefile.am:
* examples/helloworld/helloworld.c: (event_loop), (main):
* examples/queue/queue.c: (event_loop), (main):
* examples/queue2/queue2.c: (main):
Update a couple of the examples to work again.
* gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_empty),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_handle_event):
Spelling corrections and extra debug.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (is_eos),
(gst_bin_add_func), (bin_element_is_sink), (gst_bin_get_state),
(gst_bin_change_state), (gst_bin_dispose), (bin_bus_handler):
* gst/gstbin.h:
* gst/gstpipeline.c: (gst_pipeline_init), (gst_pipeline_dispose),
(gst_pipeline_change_state):
* gst/gstpipeline.h:
Move the bus handler for children to the GstBin, and create a
separate bus for receiving messages from children to the one the
bus sends 'upwards' on.
Original commit message from CVS:
* gst/gstbin.c: (clear_queue), (remove_all_from_queue),
(gst_bin_change_state):
Lame attempt at making the state change function a bit
more readable.
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_state), (gst_bin_iterate_state_order),
(gst_bin_change_state):
Cleanup the get_state() function a little, make sure it
iterates the same set of elements.
Added stub iterate_state_order().
Original commit message from CVS:
Added support for live sources and other elements that
cannot do preroll.
Updated design docs, added live-source design doc.
Implemented live source functionality in basesrc
Fix error condition in _bin_get_state()
Implement live source handling in -launch.
Added check for live sources.
Fixed case in GstBin where elements were changed state
multiple times.
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* gst/gstbin.c: (bin_element_is_sink), (has_ancestor),
(bin_element_is_semi_sink), (append_child), (gst_bin_change_state):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_send_event), (gst_pad_start_task):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop),
(gst_queue_sink_activate), (gst_queue_src_activate),
(gst_queue_change_state):
* gst/gstqueue.h:
Fix state changes for non sinks. We now change sinks, then elements
with unconnected srcpads, then the rest.
More efficient queue unlocking in flush and state changes.
Set the pad activate mode even if it does not have an activate
function.
Original commit message from CVS:
2005-05-16 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (sink_iterator_filter): Err... um...
* check/gst/gstbin.c (test_ghost_pads): New test for the
ghosting-if-elements-not-in-same-bin behavior.
Original commit message from CVS:
2005-05-14 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (gst_bin_iterate_sinks): Use sink_iterator_filter
so as to get the refs right.
(sink_iterator_filter): New function, wraps bin_element_is_sink,
unreffing objects that don't pass the filter.
Original commit message from CVS:
2005-05-14 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (gst_bin_change_state): Fix state changes if a bin
has no sinks.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_init),
(gst_basesink_activate):
* gst/base/gstbasesrc.c: (gst_basesrc_unlock),
(gst_basesrc_is_seekable):
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(bin_element_is_sink), (gst_bin_change_state):
* gst/gstelement.c: (gst_element_add_pad), (gst_element_query):
* gst/gstelement.h:
Identify sinks by their flag to avoid overly complicated
checks (fow now).
Do state changes even for elements not reachable from the
sinks.
BaseSink is a sink now :)
Some more debugging info in the basesrc.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (cb_parent_unset),
(gst_bin_get_state):
If a child is removed from a bin while we remove the child from
the bin and while we're retrieving its state, signal this to the
get_state function so we abort the wait (instead of waiting for
a timeout) and can immediately re-iterate over all other elements.
Original commit message from CVS:
2005-05-10 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfakesink.c (gst_fakesink_render): Er, emit with
*all* the arguments.
* gst/base/gstbasetransform.c (gst_base_transform_event): Grab the
stream lock if it's a FLUSH_DONE; normal flushes don't get the
lock (according to the docs -- if this is wrong change the docs).
* gst/gstpipeline.c (gst_pipeline_change_state): Set the bus to
flush messages in the NULL state.
* gst/gstbus.c (gst_bus_post): If a bus is flushing, unref the
message immediately and return.
(gst_bus_set_flushing): New function. If a bus is flushing, it
flushes out any queued messages and immediately unrefs new
messages. This is so when an element goes to NULL, all of the
unhandled messages coming from it can be freed, and their
references to the element dropped. In other words: message source
ref considered harmful :P
* gst/gstbin.c (gst_bin_change_state): Unref peer element when
we're finished with it.
* gst/gstmessage.c (gst_message_new_state_changed):
Original commit message from CVS:
Added state change code.
Added/updated docs.
Added sink base class, make fakesink extend the base class.
Small cleanups in GstPipeline.
