Currently vaGetSurfaceBufferWl() is used to create wayland buffers.
Unfortunately this is not implemented by the 'media-driver' and Mesa VA-API
drivers. And the implementation provided by 'intel-vaapi-driver' is not
compatible with a Wayland server that uses the iris Mesa driver.
So create the Wayland buffers manually with the zwp_linux_dmabuf_v1 wayland
protocol. Formats and modifiers supported by the Wayland server are taken
into account. If necessary, VPP is enabled to convert the buffer into a
supported format.
Fall back to vaGetSurfaceBufferWl() if creating buffers via dambuf protocol
fails.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/346>
Committing the first buffer for a surface must not be done before
ack_configure() has been sent for the xdg_surface.
With weston, the commit will fail with "error 3: xdg_surface has never been
configured".
Wait in gst_vaapi_window_wayland_show() until configure is done to avoid
this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/346>
The double reference lists may be required by drivers and there should
be no P frames in the of stream. The old way of converting P frames to
B frames is by setting `low-delay-b` property, which is unconvenient
and has bad user experience, since most of the users do not know when
to set this property, and if it is not set correctly, the encoding
pipeline fails or even hangs on some platforms. VA driver now provides
a attribute to query whether both reference lists must be un-NULL for
a profile/entrypoint pair.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/284>
In HEVC, P and B definitions are different from AVC: P frames have
just one reference list and so 1 MV, while B frames have two reference
lists and so 2 MVs. No matter B or P, ist reference lists can contain
forward/backward reference. So P and B can both have bi-directions
dependency, the difference is just their reference list
number (i.e. MV number). This is different from the AVC.
The *low delay b mode* refers to a special HEVC mode, in which the
stream just contain I and B frames, without P frames, and all B frames
only have forward direction dependencies (i.e. all inter frames have 2
reference lists but no backward reference in both lists). This is
similar to AVC I/P mode, but changing the P to the forward dependent
B.
The `low-delay-b` property is now just used to simply convert all P
frames to B frames when driver does not support P frames (so both
reference lists have the same references frames). This is a little
different from the meaning of low delay b mode (the two ref lists may
have the different reference frames). And the driver now can report
whether it supports P frames correctly, so there is no need to use
this property and deprecate it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/284>
Like build_template_raw_caps_by_codec(), this function can detect and
build the caps for specified codec based on the query of the profiles.
The result is coded caps such as video/x-h265, video/x-h264. The result
can be used as the template of encode's src or decode's sink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/354>
The synthetic profiles, such as H264 baseline, H265 intra, etc. are
added at the end of processing all available VA profiles. This
generated an non-optimal caps for negotiation, since the synthetic
profiles don't have frame size ranges.
This patch adds those possible synthetic profiles when the associated
profile is processed, with its frame size ranges.
Now allowed sink caps are simpler.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/363>
The vaCreateContext do not need to specify the surfaces for the
context creation now. So we do not need to bind any surface to the
context anymore. Surfaces should be the resource belong to display
and just be used in encoder/decoder context.
The previous manner has big limitation for decoder. The context's
surface number is decided by dpb size. All the surfaces in dpb will
be attached to a gstbuffer and be pushed to down stream, and the
decoder need to wait down stream free the surface and go on if not
enough surface available. For more and more use cases, this causes
deadlock. For example,
gst-launch-1.0 filesrc location=a.h264 ! h264parse ! vaapih264dec
! x264enc ! filesink location=./output.h264
will cause deadlock and make the whole pipeline hang.
the x264enc encoder need to cache more than dpb size surfaces.
The best solution is seperating the surfaces number and the dpb size.
dpb and dpb size shoule be virtual concepts maintained by the decoder.
And let the surfaces_pool in context maintain the re-use of all surfaces.
For encoder, the situation is better, all the surfaces are just used
as reference frame and no need to be pushed to down stream. We can
just reserve and set the capacity of the surfaces_pool to meet the
request.
Fix: #147Fix: #88
Co-Author: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/353>
Instead of using dmabuf allocator in source pad, when raw video caps
are negotiated, it uses VA allocator as before, since it is stable
in more use cases, for example transcoding, and more backend drivers.
Dmabuf allocator is only used when dmabuf caps feature is negotiated.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/352>
iHD doesn't provide a full implemention for rendering surfaces and
i965 has problems in wayland. And I suspect this path is followed
by other driver implementations.
This patch demotes the rank of vaapisink to secondary, so it will
not be autoplugged avoiding bad experience of users.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/336>
Registering only stream's DBP size number of surfaces for decoding VA
surfaces brings issues for certain streams. This change register all
possible number of reference surfaces in a stream, which is 16.
Fixes: #94
The h265 encoder just support tune mode:
(0): none - None
(3): low-power - Low power mode
So, no need to check and set the high compression parameters.
And by the way, the current ensure_tuning_high_compression manner
of choosing the hightest profile idc as the best compression profile
is not correct. Unlike h264, in h265 the higher profile idc number
does not mean it has more compression tools, and so it has better
compression performance. It may even be un-compatible with the lower
profile idc. For example, the SCREEN_CONTENT_CODING profile with idc
9 is not compatible with 3D_MAIN profile with idc 8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/348>
Right now, all outputs are handled. The means that the registry object for
all but the last are leaked. As a result the sizes are not used correctly.
With two outputs, at first the mode and physical size of the second output
are used. If the first output changes the mode, then the physical size of
the second output is used in combination with the resolution of the first
output. The resulting pixel aspect ratio is incorrect.
There seems to be no way to determine on which output the window is shown,
so just use the first one to get consistent results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/341>
When the element's state changes to NULL, it can still receive
queries, such as the image formats. The display is needed in such
queries but not well protected for MT safe.
For example, ensure_allowed_raw_caps() may still use the display
while it is disposed by gst_vaapi_plugin_base_close() because of
the state change.
We can keep the display until the element is destroyed. When the
state changes to NULL, and then changes to PAUSED again, the display
can be correctly set(if type changes), or leave untouched.
Fix: #260
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/343>
