If the GOP temporal sequence number (TSN) is interpolated from a valid
PTS, then we need to compensate that PTS corresponding to the start of
GOP with the next picture to be decoded, which shall be an I-frame,
based on its sequence number.
https://bugzilla.gnome.org/show_bug.cgi?id=748676
b7dded3: h264parse: don't consider unknown stream-format as avc
5110ad9: h264parse: fix up handling of input caps corner cases
e51db3e: h264parse: Remove dead code
3d739d0: codecparser: h265: Fix the number of tile rows/columns parsing
8482957: h265parse: Fix profile, tier and level setting in caps
4649acb: h265parse: Fix the memory freeing of stored VPS nals
f2beeb7: h265parse: Fix source caps to report cropped dimensions
6886a31: h264parse: Fix profile and level setting in caps
5286c1a: h264parse: Consider SEI NALU as "HEADER" packets
eb97854: videoparsers: h264: bit-exact sync with upstream, minor changes here and there
53074fc: build: Upgrade GStreamer dependency to 1.0
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Before pushing a the new frame, the render() method calls sync() to flush the
pending frames. Nonetheless, the last pushed frame never gets rendered, leading
to a memory leak too.
This patch calls sync() in the destroy() to flush the pending frames before
destroying the window.
Also a is_cancelled flag is added. This flag tells to not flush the event
queue again since the method failed previously or were cancelled by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
Otherwise wl_display_dispatch_queue() might prevent the pipeline from
shutting down. This can happen e.g. if the wayland compositor exits while
the pipeline is running.
Changes:
* renamed unlock()/unlock_stop() to unblock()/unblock_cancel() in gstvaapiwindow
* splitted the patch removing wl_display_dispatch_queue()
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492https://bugzilla.gnome.org/show_bug.cgi?id=749078
wl_display_dispatch_queue() might prevent the pipeline from shutting
down. This can happen e.g. if the wayland compositor exits while the
pipeline is running.
This patch replaces it with these steps:
- With wl_display_prepare_read() all threads announce their intention
to read.
- wl_display_read_events() is thread save. On threads reads, the other
wait for it to finish.
- With wl_display_dispatch_queue_pending() each thread dispatches its
own events.
wl_display_dispatch_queue_pending() was defined since wayland 1.0.2
Original-patch-by: Michael Olbrich <m.olbrich@pengutronix.de>
* stripped out the unlock() unlock_stop() logic
* stripped out the poll handling
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749078https://bugzilla.gnome.org/show_bug.cgi?id=747492
Since frame in the private data means the last frame sent, it would
semantically better use last_frame.
Also, this patch makes use of g_atomic_pointer_{compare_and_exchange, set}()
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
Wayland window has a pointer to the last pushed frame and use it to set the
flag for stopping the queue dispatch loop. This may lead to memory leaks,
since we are not keeping track of all the queued frames structures.
This patch removes the last pushed frame pointer and change the binary flag
for an atomic counter, keeping track of number of queued frames and use it for
the queue dispatch loop.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
This patch takes out the wayland's buffer from the the frame structure. The
buffer is queued to wayland and destroyed in the "release" callback. The
frame is freed in the surface's "done" callback.
In this way a buffer may be leaked but not the whole frame structure.
- surface 'done' callback is used to throttle the rendering operation and to
unallocate the frame, but not the buffer.
- buffer 'release' callback is used to destroy wl_buffer.
Original-patch-by: Zhao Halley <halley.zhao@intel.com>
* code rebase
* kept the the event_queue for buffer's proxy
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749078
This patch fixes several issues found when running the `make distcheck`
target:
- In commit c561b8da, the update of gstcompat.h in Makefile.am was
forgotten.
- In commit c5756a91 add the simple_encoder_source_h in EXTRA_DIST was
forgotten.
- vpx.build.stamp is not generated at all, only vpx.configure.stamp.
- The make target distcleancheck failed because some autogenerated files
were not handled with the DISTCLEANFILES variable.
Note: `make distcheck -jXX` is not currently supported.
Add a cosmetic change to replace VAAPI buffer with VA buffer and most
importantly fix warnings spitted out during build on 64-bit platforms.
../../tests/simple-encoder.c:211:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘gssize’ [-Wformat=]
g_warning ("Invalid VAAPI buffer size (%d)", size);
^
../../tests/simple-encoder.c:217:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘gssize’ [-Wformat=]
g_warning ("Failed to create output buffer of size %d", size);
^
This patch adds a simple-encoder test program that uses libgstvaapi for video
encoding to elementary (raw) streams. Input stream is raw YUV in the Y4M
format. That can be from a regular file or standard input when the input
filename is "-".
Usage: simple-encoder [options]* <source>
Options:
--output|-o output file name
--codec|-c codec to use for video encoding
--bitrate|-b desired bitrate (kbps)
By default, and as an initial patch, the encoded stream shall conform to the
minimally supported profile. That is "Constrained Baseline Profile" for H.264
and "Simple Profile" for MPEG-2. Though, those are the defaults to be
generated by libgstvaapi.
You can find Y4M sample files here http://samples.mplayerhq.hu/yuv4mpeg2/
Original-patch-by: Changzhi Wei <changzhix.wei@intel.com>
* general code clean-up
* removed the yuv reader thread
* re-wrote the y4m file parser
* updated used API fixed some wrong usage
* fixed a lot of memory leaks
* added the bitrate setting
* keep fps' numerator and denominator
* simplified the thread control
* removed custom logging and use glib
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=719528
GST_VAAPI_ENCODER_STATUS_NO_SURFACE and GST_VAAPI_ENCODER_STATUS_NO_BUFFER
are not errors, so they do not have the ERROR namespace.
This patch fixes this typo in documentation.
On s390x, guintptr and GstVaapiID are not compatible types. The
implementation of gst_vaapi_window_new_internal() and all its callers
seem to assume that its third argument is a GstVaapiID, while the
header gives it guintptr type.
https://bugzilla.gnome.org/show_bug.cgi?id=744559
Fix link when building plugin elements without HEVC support. e.g. don't
try to call into gst_vaapi_decoder_h265_set_alignment() if there is no
support HEVC enabled in libgstvaapi.
Also, drop disabled codecs from static template caps. Add the missing
HEVC static template caps into vaapidecodebin too.
Since bug #745728 was fixed the oldest supported version of GStreamer is
1.2. That GStreamer release requires glib 2.32, so we can upgrade our
requirement too.
This patch changes the required version of glib in configure.ac and removes
the hacks in glibcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=748698
In commit 97b768, a regression for GStreamer 1.2 was introduced:
GStreamer 1.2 doesn't check, in gst_buffer_pool_set_config() if the
config option is already set. This patch adds an inline function to
first verify if the option is not in the pool config berfore add it.
In order to reduce the noise, the query type log was downgrade from INFO to
DEBUG, and the shared display address log message is assigned to the object.
Fix regression introduced by bd866479, the query after decide_allocation()
always needs a pool in the first slot.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=748559
This patch only intends to improve readability: in the method
gst_vaapi_window_wayland_sync() the if/do instructions are squashed into a
single while loop.
Also renames the frame_redraw_callback() callback into frame_done_callback(),
which is a bit more aligned to Wayland API.
The Wayland compositor may still use the buffer when the frame done
callback is called.
This patch destroys the frame (which contains the buffer) until the
release callback is called. The draw termination callback only controls
the display queue dispatching.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492
This a cosmetic refactor: gst_vaapidecode_internal_flush() removes its only
label; gst_vaapidecode_finish() is more readable and gst_vaapidecode_purge()
shares the same error message of gst_vaapidecode_internal_flush() when flush
fails.
Add the method gst_vaapidecode_purge(). This method releases the
flushed frames from the decoder.
This new method add more readablity to gst_vaapidecode_destroy()
When a frame is rejected by downstream, the message is logged twice. This
patch removes one of those logging messages.
Also, the reject of a frame doesn't mean an alarming error. This patch demotes
the log message from error to info.
