Fix gstreamer-vaapi includedir for GStreamer 1.2 setups. i.e. use
the pkgconfig version (1.0) instead of the intended API version (1.2).
libgstvaapi1.0-dev and libgstvaapi1.2-dev packages will now conflict,
as would core GStreamer 1.0 and GStreamer 1.2 dev packages anyway.
Add gst_vaapi_get_config_attribute() helper function that takes a
GstVaapiDisplay and the rest of the arguments with VA types. The aim
is to have thread-safe VA helpers by default.
Make sure to configure the encoder with the set of packed headers we
intend to generate and submit. i.e. make selection of packed headers
to submit more robust.
Cache the first compatible GstVaapiProfile found if the encoder is not
configured yet. Next, factor out the code to check for the supported
rate-control modes by moving out vaGetConfigAttributes() to a separate
function, while also making sure that the attribute type is actually
supported by the encoder.
Also fix the default set of supported rate control modes to not the
"none" variant. It's totally useless to expose it at this point.
Introduce GstVaapiContextUsage so that to explicitly determine the
usage of a VA context. This is useful in view to simplifying the
creation of VA context for VPP too.
Unknown attributes, or attributes that are not supported for the given
profile/entrypoint pair have a return value of VA_ATTRIB_NOT_SUPPORTED.
So, return failure in this case.
Move GstVideoOverlayComposition handling to separate source files.
This helps keeing GstVaapiContext core implementation to the bare
minimal, i.e. simpy helpers to create a VA context and handle pool
of associated VA surfaces.
Improve documentation and debug messages. Clean-up APIs, i.e. strip
them down to the minimal set of interfaces. They are private, so no
need expose getters for instance.
Make sure that libgstvaapi private headers remain internally used to
build libgstvaapi libraries only. All header dependencies were reviewed
and checks for IN_LIBGSTVAAPI definition were added accordingly.
Also rename GST_VAAPI_CORE definition to IN_LIBGSTVAAPI_CORE to keep
consistency.
Set a valid GstVideoCodecFrame.system_frame_number when decoding a
stream in standalone mode. While we are at it, improve the debugging
messages to also include that frame number.
When decoding failed, or that the frame was dropped, the associated
surface proxy is not guaranteed to be present. Thus, the GST_DEBUG()
message needs to check whether the proxy is actually present or not.
https://bugzilla.gnome.org/show_bug.cgi?id=722403
[fixed gst_vaapi_surface_proxy_get_surface_id() to return VA_INVALID_ID]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Don't emit NAL HRD parameters for now in the SPS headers because the
SEI buffering_period() and picture_timing() messages are not handled
yet. Some additional changes are necessary to get it right.
https://bugzilla.gnome.org/show_bug.cgi?id=722734
Fix default CPB buffer size to something more reasonable (1500 ms)
and that still fits the level limits. This is a non configurable
property for now. The initial CPB removal delay is also fixed to
750 ms.
https://bugzilla.gnome.org/show_bug.cgi?id=722087
Round down the calculated, or supplied, bitrate (kbps) into a multiple
of the HRD bitrate scale factor. Use a bitrate scale factor of 64 so
that to have less losses in precision. Likewise, don't round up because
that could be a strict constraint imposed by the user.
Fix the level calculation involving bitrate limits. Since we are
targetting NAL HRD conformance, the check against MaxBR from the
Table A-1 limits shall involve cpbBrNalFactor depending on the
active profile.
Submit sequence parameter buffers only once, or when the bitstream
was reconfigured in a way that requires such. Always submit packed
sequence parameter buffers at I-frame period, if the VA driver needs
those.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
Make sure to submit the packed headers only if the underlying VA driver
requires those. Currently, only handle packed sequence and picture
headers.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
The VAEncSequenceParameterBuffer.ip_period value reprents the distance
between the I-frame and the next P-frame. So, this also accounts for
any additional B-frame in the middle of it.
This fixes rate control heuristics for certain VA drivers.
https://bugzilla.gnome.org/show_bug.cgi?id=722735
Fix level characterisation when the bitrate is automatically computed
from the active coding tools. i.e. ensure the bitrate once the profile
is completely characterized but before the level calculation process.
Document and rename a few functions here and there. Drop code that
caps num_bframes variable in reset_properties() since they shall
have been checked beforehand, during properties initialization.
Clean-up GstBitWriter related utility functions and simplify notations.
While we are at it, also make bitstream writing more robust should an
overflow occur. We could later optimize for writing headers capped to
their maximum possible size by using the _unchecked() helper variants.
Drop private header since it was originally used to expose internals
to the plugin element. The proper interface is now the properties API,
thus rendering private headers totally obsolete.
Add support for hue, saturation, brightness and constrat adjustments.
Also fix cap info local copy to match the really expected cap subtype
of interest.
https://bugzilla.gnome.org/show_bug.cgi?id=720376
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Change the submission order of VA objects so that to make that process
more logical. i.e. submit sequence parameter first, if any; next the
packed headers associated to sequece, picture or slices; and finally
the actual picture and associated slices.
Various clean-ups to improve consistency and readability: rename some
variables, drop unused macro definitions, drop initialization of vars
that are zero-initialized from the base class, drop un-necessary casts,
allocate GPtrArrays with a destroy function.
Fix frame cropping rectangle calculation to handle horizontal resolutions
that don't match a multiple of 16 pixels, but also the vertical resolution
that was incorrectly computed for progressive sequences too.
https://bugzilla.gnome.org/show_bug.cgi?id=722089
For non "Constant-QP" modes, we could provide more reasonable heuristics
for the target bitrate. In general, 48 bits per macroblock with all the
useful coding tools enable looks safe enough. Then, this rate is raised
by +10% to +15% for each coding tool that is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=719699
Add support for "high-compression" tuning option. First, determine the
largest supported profile by the hardware. Next, check any target limit
set by the user. Then, enable each individual coding tool based on the
resulting profile_idc value to use.
https://bugzilla.gnome.org/show_bug.cgi?id=719696
Allow user to precise the largest profile to use for encoding due
to target decoder constraints. For instance, if CABAC entropy coding
mode is requested by "constrained-baseline" profile only is desired,
then an error is returned during codec configuration.
Also make sure that the suitable profile we derived actually matches
what the HW can cope with.
https://bugzilla.gnome.org/show_bug.cgi?id=719694
Refine the heuristic to determine the maximum size of a coded buffer
to account for the exact number of slices. set_context_info() is the
last step during codec reconfiguration, no additional change is done
afterwards, so re-using the num_slices field here is fine.
https://bugzilla.gnome.org/show_bug.cgi?id=719953
Automatically derive the minimum profile and level to be used for
encoding, based on the activated coding tools. The encoder will
be trying to generate a bitstream that has the best chances to be
decoded on most platforms by default.
Also change the default profile to "constrained-baseline" so that
to ensure maximum compatibility when the stream is decoded.
https://bugzilla.gnome.org/show_bug.cgi?id=719691
Fix lookup for a suitable HW profile, as to be used by the underlying
hardware, based on heuristics that lead to characterize the SW profile,
i.e. the one used by the SW level encoding logic.
Also fix constraint_set0_flag (A.2.1) and constraint_set1_flag (A.2.2)
as they should respectively match the baseline and main profile.
https://bugzilla.gnome.org/show_bug.cgi?id=719827
The libgstvaapi core encoders are meant to support raw bitstreams only.
Henceforth, we are always producing a stream in "byte-stream" format.
However, the "codec-data" buffer which holds SPS and PPS headers is
always available. The "lengthSizeMinusOne" field is always set to 3
so that in-place "byte-stream" format to "avc" format conversion could
be performed.
Various clean-ups to improve consistency and readability: rename some
variables, drop unused macro definitions, drop initialization of vars
that are zero-initialized from the base class, drop un-necessary casts.
Fix lookup for a suitable HW profile, as to be used by the underlying
hardware, based on heuristics that lead to characterize the SW profile,
i.e. the one used by the SW level encoding logic.
Automatically derive the minimum profile and level to be used for
encoding, based on the activated coding tools. Improve lookup for
the best suitable level with the new MPEG-2 helper functions.
Also change the default profile to "simple" so that to ensure maximum
compatibility when the stream is decoded.
https://bugzilla.gnome.org/show_bug.cgi?id=719703
Various clean-ups to improve consistency and readability: drop unused
macro definitions, drop initialization of vars that are zero-initialized
from the base class, drop un-necessary casts.
Add encoder "tune" option to override the default behaviour that is to
favor maximum decoder compatibility at the expense of lower compression
ratios.
Expected tuning options to be developed are:
- "high-compression": improve compression, target best-in-class decoders;
- "low-latency": tune for low-latency decoding;
- "low-power": tune for encoding in low power / resources conditions.
Only expose the exact static set of supported rate-control properties
to the upper layer. For instance, if the GstVaapiEncoderXXX class does
only support CQP rate control, then only add it the the exposed enum
type.
Add helper macros and functions to build a GType for an enum subset.
Add gst_vaapi_encoder_set_keyframe_period() interface to allow the
user control the maximum distance between two keyframes. This new
property can only be set prior to gst_vaapi_encoder_set_codec_state().
A value of zero for "keyframe-period" gets it re-evaluated to the
actual framerate during encoder reconfiguration.
Improve codec reconfiguration to be performed only through a single
function. That is, remove the _set_context_info() hook as subclass
should not alter the parent GstVaapiContextInfo itself. Besides, the
VA context is constructed only at the final stages of reconfigure().
Add interface to communicate the encoder resolution and related info
like framerate, interlaced vs. progressive, etc. This new interface
supersedes gst_vaapi_encoder_set_format() and doesn't use any GstCaps
but rather use GstVideoCodecState.
Note that gst_vaapi_encoder_set_codec_state() is also a synchronization
point for codec config. This means that the encoder is reconfigured
there to match the latest properties.
Add interface to communicate configurable properties to the encoder.
This covers both the common ones (rate-control, bitrate), and the
codec specific properties.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_bitrate() interface to allow the user control
the bitrate for encoding. Currently, changing this parameter is only
valid before the first frame is encoded. Should the value be modified
afterwards, then GST_VAAPI_ENCODER_STATUS_ERROR_OPERATION_FAILED is
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_rate_control() interface to request a new
rate control mode for encoding. Changing the rate control mode is
only valid prior to encoding the very first frame. Afterwards, an
error ("operation-failed") is issued.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Instal <gst/vaapi/gstvaapiutils_h264.h> header but only expose the
H.264 levels in there. The additional helper functions are meant
to be private for now.
Fix formts for various GST_DEBUG et al. invocations. More precisely,
make size_t arguments use the %zu format specifier accordingly; force
XID formats to be a 32-bit unsigned integer; and fix the format used
for gst_vaapi_create_surface_with_format() error cases since we have
been using strings nowadays.
The following helper functions are no longer used, thus are removed:
- gst_vaapi_video_format_from_structure()
- gst_vaapi_video_format_from_caps()
- gst_vaapi_video_format_to_caps()
Replace gst_vaapi_display_get_{decode,encode}_caps() APIs with more
more convenient APIs that return an array of GstVaapiProfile instead
of GstCaps: gst_vaapi_display_get_{decode,encode}_profiles().
Replace gst_vaapi_display_get_{image,subpicture}_caps() APIs, that
returned GstCaps, with more convenient APIs that return an array of
GstVideoFormat: gst_vaapi_display_get_{image,subpicture}_formats().
Fix display creation code to check that any display obtained from a
neighbour actually has the type we expect. Note: if display type is
set to "any", we can then accept any VA display type.
The GLTextureUploadMeta implementation assumed that for each upload()
sequence, the supplied texture id is always the same as the one that
was previously cached into the underlying GstVaapiTexture. Cope with
any texture id change the expense to recreate the underlying VA/GLX
resources.
https://bugzilla.gnome.org/show_bug.cgi?id=719643
Improve robustness when some expected packets where not received yet
or that were not correctly decoded. For example, don't try to decode
a picture if there was no valid frame headers parsed so far.
https://bugs.freedesktop.org/show_bug.cgi?id=57902
Conformance test Base_Ext_Main_profiles/BA3_SVA_C.264 complys with
extended profile specifications. However, the SPS header has the
constraint_set1_flag syntax element set to 1. This means that, if
a Main profile compliant decoder is available, then it should be
able to decode this stream.
This changes makes it possible to fall-back from Extended profile
to Main profile if constraint_set1_flag is set to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=720190
Recognize streams marked as conforming to the "Constrained Baseline
Profile". If VA driver supports that as is, fine. Otherwise, fallback
to baseline, main or high profile.
Constrained Baseline Profile conveys coding tools that are common
to baseline profile and main profile.
https://bugzilla.gnome.org/show_bug.cgi?id=719947
[Added fallbacks to main and high profiles]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The GStreamer codecparser layer now parses the scaling lists in zigzag
scan order, as expected, so that to match the original bitstream layout
and specification. However, further convert the scaling lists into
raster scan order to fit the existing practice in most VA drivers.
https://bugzilla.gnome.org/show_bug.cgi?id=706406
- gst_vaapi_utils_h264_get_level():
Returns GstVaapiLevelH264 from H.264 level_idc value
- gst_vaapi_utils_h264_get_level_idc():
Returns H.264 level_idc value from GstVaapiLevelH264
- gst_vaapi_utils_h264_get_level_limits():
Returns level limits as specified in Table A-1 of the H.264 standard
- gst_vaapi_utils_h264_get_level_limits_table():
Returns the Table A-1 specification
* Profiles:
- gst_vaapi_utils_h264_get_profile():
Returns GstVaapiProfile from H.264 profile_idc value
- gst_vaapi_utils_h264_get_profile_idc():
Returns H.264 profile_idc value from GstVaapiProfile
* Chroma formats:
- gst_vaapi_utils_h264_get_chroma_type():
Returns GstVaapiChromaType from H.264 chroma_format_idc value
- gst_vaapi_utils_h264_get_chroma_format_idc():
Returns H.264 chroma_format_idc value from GstVaapiChromaType
The previous fix was only valid to express the maximum size of the
macroblock layer, i.e. without any headers. Now, also account for
the slice headers and top picture header, but also any other header
we might stuff into the VA coded buffer, e.g. sequence headers.
Fix coded buffer size for each codec. A generic issue was that the
number of macroblocks was incorrectly computed. The second issue was
specific to MPEG-2 were the max number of bits per macroblock, and
as defined by the standard, was incorrectly mapped to the (lower)
H.264 requirement. i.e. 4608 bits vs. 3200 bits limit.
Change get_context_info() into a set_context_info() function that
initializes common defaults into the base class, thus allowing the
subclasses to specialize the context info further on.
The set_context_info() hook is also the location where additional
context specific data could be initialized. At this point, we are
guaranteed to have valid video resolution size and framerate. i.e.
gst_vaapi_encoder_set_format() was called beforehand.
Clean public APIs up so that to better align with the decoder APIs.
Most importantly, gst_vaapi_encoder_get_buffer() is changed to only
return the VA coded buffer proxy. Also provide useful documentation
for the public APIs.
Kill GstVaapiEncoderSyncPic objects that are internally and temporarily
allocated. Rather, associate a GstVaapiEncPicture to a coded buffer
through GstVaapiCodedBufferProxy user-data facility.
Besides, use a GAsyncQueue to maintain a thread-safe queue object of
coded buffers.
Partial fix for the following report:
https://bugzilla.gnome.org/show_bug.cgi?id=719530
Fix the GstVaapiEncoderClass parent class type. Make sure to validate
subclass hooks as early as possible, i.e. in gst_vaapi_encoder_init(),
thus avoiding useless run-time checks. Also simplify the subclass
initialization process to be less error prone.
Refactor the GstVaapiCodedBuffer APIs so that to more clearly separate
public and private interfaces. Besides, the map/unmap APIs should not
be exposed as is but appropriate accessors should be provided instead.
* GstVaapiCodedBuffer: VA coded buffer abstraction
- gst_vaapi_coded_buffer_get_size(): get coded buffer size.
- gst_vaapi_coded_buffer_copy_into(): copy coded buffer into GstBuffer
* GstVaapiCodedBufferPool: pool of VA coded buffer objects
- gst_vaapi_coded_buffer_pool_new(): create a pool of coded buffers of
the specified max size, and bound to the supplied encoder
* GstVaapiCodedBufferProxy: pool-allocated VA coded buffer object proxy
- gst_vaapi_coded_buffer_proxy_new_from_pool(): create coded buf from pool
- gst_vaapi_coded_buffer_proxy_get_buffer(): get underlying coded buffer
- gst_vaapi_coded_buffer_proxy_get_buffer_size(): get coded buffer size
Rationale: more optimized transfer functions might be provided in the
future, thus rendering the map/unmap mechanism obsolete or sub-optimal.
https://bugzilla.gnome.org/show_bug.cgi?id=719775
Add gst_vaapi_surface_proxy_copy() function that creates a new surface
proxy with the same information from the parent proxy, except that the
user-defined destroy notify function is not copied over.
The underlying VA surface is pushed back to the video pool only when
the last reference to the parent surface proxy is released.
Optimize gst_vaapiencode_handle_frame() to avoid extra memory allocation,
and in particular the GstVaapiEncObjUserData object. i.e. directly use
the VA surface proxy from the source buffer. This also makes the user
data attached to the GstVideoCodecFrame more consistent between both
the decoder and encoder plug-in elements.
Add gst_buffer_new_allocate() and gst_buffer_fill() implementations.
Fix gst_buffer_new_wrapped_full() implementation to handle the destroy
notify function.
Add initial API for video encoding: only basic interfaces and small
encoder objects are implemented so far.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
GstBitWriter provides a bit writer that can write any number of bits
to a pre-allocated memory buffer. Helper functions are also provided
to write any number of bits from 8, 16, 32 and 64 bit variables.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Extend GstVaapiContextInfo structure to hold the desired rate control
mode for encoding purposes. For decoding purposes, this field is not
used and it is initialized to GST_VAAPI_RATECONTROL_NONE.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add GstVaapiRateControl types and GType values in view to supporting
rate controls for encoding. This is meant to be used for instance in
GstVaapiContext.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This library is using symbols that don't exist in GStreamer 0.10 so
it needs to link to built-in implementation (libgstvaapi-videoutils).
https://bugzilla.gnome.org/show_bug.cgi?id=712282
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Destroy VPP output surface pool on exit. Also avoid a possible crash
in double-free situation caused by insufficiently reference counted
array of formats returned during initialization.
The <gst/vaapi/gstvaapicontext.h> header was removed from the public
set of APIs. So, don't make public headers (gstvaapidecoder.h) depend
on private files.
Add gst_vaapi_fitler_set_deinterlacing_references() API to submit the
list of surfaces used for forward or backward reference in advanced
deinterlacing mode, e.g. Motion-Adaptive, Motion-Compensated.
The list of surfaces used as deinterlacing references shall be live
until the next call to gst_vaapi_filter_process().
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix deinterlacing flags to make more sense. The TFF (top-field-first)
flag is meant to specify the organization of reference frames used in
advanced deinterlacing modes. Introduce the more explicit flag TOPFIELD
to specify that the top-field of the supplied input surface is to be
used for deinterlacing. Conversely, if not set, this means that the
bottom field of the supplied input surface will be used instead.
Add a couple of helper functions:
- gst_vaapi_filter_has_operation(): checks whether the VA driver
advertises support for the supplied operation ;
- gst_vaapi_filter_use_operation(): checks whether the supplied
operation was already enabled to its non-default value.
The user-defined destroy notify function is meant to be called only when
the surface proxy was fully released, i.e. once it actually released the
VA surface back to the underlying pool.
Fix GstVaapiPicture, GstVaapiSlice and GstVaapiSurfaceProxy initialization
sequences to have the expected default values set beforehand in case of an
error raising up further during creation. i.e. make it possible to cleanly
destroy those partially initialized objects.
https://bugzilla.gnome.org/show_bug.cgi?id=707108
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix ensure_operations() to release the VPP operations array if non
NULL, prior to returning to the caller. The former function was also
renamed to a more meaningful get_operations() since the caller owns
the returned array that needs to be released.
Fix first-time operation lookup through find_operation() if the set
of supported operations was not initially determined through the
gst_vaapi_filter_get_operations() helper function.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix intiialization of GstVaapiFilterOpData for colorbalance related
operations. In particular, fill in the va_subtype field accordingly.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
VASurfaceAttrib and VAProcFilterParameterBufferType are symbols
that need to be guarded for libva 0.34 and 0.33, respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=709102
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix calculation of MCU count for image sizes that are not a multiple
of 8 pixels in either dimension, but also for non-common sampling
factors like 4:2:2 in non-interleaved mode.
Add support for images with multiple scans per frame. The Huffman table
can be updated before SOS, and thus possibly requiring multiple uploads
of Huffman tables to the VA driver. So, the latter must be able to cope
with multiple VA buffers of type 'huffman-table' and with the correct
sequential order.
Improve robustness when some expected packets where not received yet
or that were not correctly decoded. For example, don't try to decode
a picture if there was no valid frame headers.
Improve debugging and error messages. Rename a few variables to fit the
existing naming conventions. Change some fatal asserts to non-fatal
error codes.
Split the input buffer data into decoder units that represent a JPEG
segment. Handle scan decoder unit specifically so that it can include
both the scan header (SOS) but also any other ECS or RSTi segment.
That way, we parse the input buffer stream only once at the gst-vaapi
level instead of (i) in gst_vaapi_decoder_jpeg_parse() to split the
stream into frames SOI .. EOI and (ii) in decode_buffer() to further
determine segment boundaries and decode them.
In practice, this is a +15 to +25% performance improvement.
Fix decode_buffer() function to gracefully skip comment (COM) segments.
This fixes decoding of streams generated by certain cameras, e.g. like
the Logitech Pro C920.
https://bugzilla.gnome.org/show_bug.cgi?id=708208
Signed-off-by: Junfeng Xu <jun.feng.xu@intel.com>
Look for the exact image bounds characterised by the <SOI> and <EOI>
markers. Use the gst_jpeg_parse() codec parser utility function to
optimize the lookup for the next marker segment.
https://bugzilla.gnome.org/show_bug.cgi?id=707447
Fix calculation of the offset to the next marker segment since the
correction of the codecparser part to match the API specification.
i.e. the GstJpegMarkerSegment.size field represents the size in bytes
of the segment minus any marker prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=707447
Signed-off-by: Junfeng Xu <jun.feng.xu@intel.com>
Fix detection of VA/JPEG decoding API with non-standard libva packages.
More precisely, some packages were shipping with a <va/va.h> header that
did not include <va/va_dec_jpeg.h>.
https://bugzilla.gnome.org/show_bug.cgi?id=706055
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
As a last resort, if video processing capabilities (VPP) are not available,
or they did not produce anything conclusive enough, then try to fallback to
the original rendering code path whereby the whole VA surface is rendered
as is, no matter of video cropping or deinterlacing requests.
Note: under those conditions, the visual outcome won't be correct but at
least, something gets displayed instead of bailing out.
Try to use VA/VPP processing capabilities to handle video cropping and
additional rendering flags that may not be directly supported by the
underlying hardware when exposing a suitable Wayland buffer for the
supplied VA surface. e.g. deinterlacing, different color primaries than
BT.601, etc.
Update the frame redraw infrastructure with a new FrameState stucture
holds all the necessary information used to display the next pending
surface.
While we are at it, delay the sync operation down to when it is actually
needed. That way, we keep performing additional tasks meanwhile.
Disable video cropping in MPEG-2 codec because it is partially implemented
and actually because nobody implements it that way, and the standard spec
does not specify the display process either anyway.
Most notably, there are two possible use cases for sequence_display_extension()
horizontal_display_size & vertical_display_size: (i) guesstimating the
pixel-aspect-ratio, or (ii) implement some kind of span & scan process
in conjunction with picture_display_extension() information.
https://bugzilla.gnome.org/show_bug.cgi?id=704848
This fixes the following issue:
CC libgstvaapi_0.10_la-gstvaapidecoder_mpeg4.lo
gstvaapidecoder_mpeg4.c:113: error: redefinition of typedef
'GstVaapiDecoderMpeg4Class'
gstvaapidecoder_mpeg4.c:44: note: previous declaration of
'GstVaapiDecoderMpeg4Class' was here
make[5]: *** [libgstvaapi_0.10_la-gstvaapidecoder_mpeg4.lo] Error 1
make[5]: Leaving directory
`/builddir/build/BUILD/gstreamer-vaapi-0.5.5.1/gst-libs/gst/vaapi'
https://bugzilla.gnome.org/show_bug.cgi?id=705148
Add basic deinterlacing support, i.e. bob-deinterlacing whereby only
the selected field from the input surface is kept for the target surface.
Setting gst_vaapi_filter_set_deinterlacing() method argument to
GST_VAAPI_DEINTERLACE_METHOD_NONE means to disable deinterlacing.
Also move GstVaapiDeinterlaceMethod definition from vaapipostproc plug-in
to libgstvaapi core library.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add ProcAmp (color balance) adjustments for hue, saturation, brightness
and contrast. The respective range for each filter shall be the same as
for the VA display attributes.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Sharpening is configured with a float value. The supported range is
-1.0 .. 1.0 with 0.0 being the default, and that means no sharpening
operation at all.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Noise reduction is configured with a float value. The supported range
is 0.0 .. 1.0 with 0.0 being the default, and that means no denoise
operation at all.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add helper functions to ensure an operation VA buffer is allocated to
the right size; that filter caps get parsed and assigned to the right
operation too; and that float parameters are correctly scaled to fit
the reported range from the VA driver.
Add gst_vaapi_video_format_from_string() helper function to convert from
a video format string representation to a suitable GstVideoFormat. This
is just an alias to gst_video_format_from_string() for GStreamer 1.0.x
builds, and a proper iteration over all GstVideoFormat string representations
otherwise for earlier GStreamer 0.10.x builds.
