Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): New test, partially disabled until
basesink is fixed.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_push_state_continue),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Move the common code for posting state-change messages into
one function.
Broadcast the state signal after we posted the messages.
Mark the bin as busy when it's doing a state-change.
Make sure async-start/done messages don't interfere with the bin's
state when it's busy.
After the state change, let the bin check which elements completed the
state change while it was busy so that it can update its state.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
Make sure we don't reference the buffer/event after we have given away
ownership in the queue.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_flush),
(gst_multi_queue_chain), (gst_multi_queue_sink_event):
Update queue state _after_ adding the item in the queue because else we
could end up being full without the element added yet.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_continue_func),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
* gst/gstbin.h:
Immediatly commit the toplevel bin state when receiving an async-done
message. This enables us to avoid spawning a thread to commit the state
in some common cases and it also avoids some races.
Avoid spawning a state thread when adding/removing async elements to a
toplevel bin. Instead we immediatly update the bin state.
Get rid of iterating all the children when getting the state in the bin
because it is now always up-to-date.
Fix bug where locked elements would always return _SUCCESS even it they
returned NO_PREROLL before being locked.
Fix the order of the state_change, async-start/done messages that was
sometimes incorrect.
Mark the state_dirty field as deprecated, we don't need it anymore as we
are always up-to-date.
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_continue_state):
Small debug inprovements.
Return the previous element state return when nothing is pending instead
of blindly returning SUCCESS.
* tests/check/generic/sinks.c: (GST_START_TEST), (pad_blocked_cb),
(gst_sinks_suite):
Add a whole bunch of new testcases.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_item_destroy),
(gst_multi_queue_item_new):
Don't use GSlice because we don't depend on >= 2.10 yet.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Work around the brokenness of the event vmethod in basetransform. Prefer
to return TRUE when the subclass returned FALSE (meaning don't forward
the event).
* libs/gst/base/gstbasetransform.h:
Clarify the docs.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
Fix wrong getter for enums in controller.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init):
Intercept criticals and warnings in the Gst-Phonon log domain, so
ASSERT_CRITICAL() etc. can be used in gst-phonon's unit tests as
well.
Original commit message from CVS:
* gst/gstparamspecs.c: (_gst_param_fraction_validate):
Since this file doesn't include "gst.h" it will not go through the
macros that disable GST_LOG if debugging was disabled.
Original commit message from CVS:
* libs/gst/check/Makefile.am:
* libs/gst/check/gstcheck.h:
* pkgconfig/gstreamer-check-uninstalled.pc.in:
* pkgconfig/gstreamer-check.pc.in:
Ugly 'fix' for the controller unit test on the p5 bot: in
fail_unless_equals_float() check whether the values are 'almost
equal' by allowing a small absolute error, which should be good
enough for our use cases (normal numbers and values close to 0).
Proper fixage left to floating point arithmetic aficionados.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.h:
API: add fail_unless_equals_float() and assert_equals_float().
Add documentation for some of the macros.
* tests/check/libs/controller.c: (GST_START_TEST):
Use newly-added asserts.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_push):
Show the caps change in the log to help spotting the case of not
exactly matching caps.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gstreamer-plugins-docs.sgml:
* docs/plugins/gstreamer-plugins-sections.txt:
Pull fdsink into the docs too.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Actually use the new functions with min/max checks for the trigger and
none interpolation modes for get() and get_value_array() instead of
just the latter.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_free):
Unset the minimum and maximum GValues when freeing the corresponding
GstControllerProperty struct.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(interpolate_trigger_get),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Protect against values larger or smaller than the minimum or maximum
allowed value for the property when using values that can be compared.
Optimize trigger interpolator a bit by taking the last requested value
into account instead of always looping through the complete list.
Fix coding style a bit, everywhere else we use "return foo" instead
of "return (foo)".
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the protection against too large or too small
values.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c: (DEFINE_CUBIC_GET):
Use gst_util_guint64_to_gdouble for conversions.
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* gst/gstbin.c: (find_message), (bin_replace_message), (is_eos),
(gst_bin_remove_func), (gst_bin_element_set_state),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Add helper function to find messages.
Generate the async-done messages together with the state change
messages.
Small cleanups in handling toplevel bins.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
Clarify docs: The get_all, get_value_array(s) functions
don't modify the GObject properties.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
Original commit message from CVS:
* gst/gstparamspecs.c: (gst_param_spec_fraction_get_type):
Don't use GLib-2.10 functions, we still depend on
GLib-how-old-is-it-again-2.8.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_class_init):
Fix signal signature.
* gst/gstsegment.c:
Add small clarification in the api docs.
* plugins/elements/gstfilesrc.c: (gst_file_src_set_location):
States are protected with object lock.
