vaapioverlay is only registered if the VA driver support the blend
operation.
This patch only executes the test if vaapioverlay is available,
otherwise the test is bail out without raising an error.
A plugin similar to the base compositor element but
uses VA-API VPP blend functions to accelerate the
overlay/compositing.
Simple example:
gst-launch-1.0 -vf videotestsrc ! vaapipostproc \
! tee name=testsrc ! queue \
! vaapioverlay sink_1::xpos=300 sink_1::alpha=0.75 \
name=overlay ! vaapisink testsrc. ! queue ! overlay.
We can get all the information about the video format at one shot
when we create the test context for getting the supported formats.
The current way to get the width and height ranges are inefficient,
since it calls the function gst_vaapi_profile_caps_append_encoder()
and it creates another temporal context to detect the resolution
information.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Some profile, such as H265_MAIN_444 on new Intel platform, may only
support ENTRYPOINT_SLICE_ENCODE_LP entrypoint. This leads two
problems:
1. We need to specify the tune mode like `vaapih265enc tune=low-power`
every time when we need to use this kind of profile. Or we can not
create the encoder context successfully.
2. More seriously, we set the entrypoint to a fixed value in
init_context_info() and so the create_test_context_config() can not
create the test context for these profile and can not get the
supported video formats, either.
We now change the entrypoint setting based on the tune option of the
encoder. If no tune property provided, we just choose the first
available entrypoint.
Instead of init_context_info() setting the passed profile, it is
assumed that it has to be set by each encoder.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
The symbol GST_VAAPI_ENTRYPOINT_INVALID is just a representation of
zero, which was already used as an invalid value tacitly. This patch
only makes it explicit.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
We use GST_VAAPI_OBJECT_NATIVE_DISPLAY with wrong parameter for x11
pixmap creation, which causes crash if we run the internal test case
of:
test-decode --pixmap
We now set encode->allowed_sinkpad_caps to NULL if we fail to get
surfaces formats. This causes two problem:
1. gst_video_encoder_proxy_getcaps use NULL as its caps parameter,
which changes its behavior. It will use encode's sinkpad template
rather than empty caps to do the clip job. So even if we fail to set
allowed_sinkpad_caps, gst_video_encoder_proxy_getcaps can still return
valid caps.
2. We should just set the allowed_sinkpad_caps once. The NULL point
make the ensure_allowed_sinkpad_caps function works again and again.
Don't reset the can_dmabuf field. This restores the
close/reset logic that existed prior to commit
ca2942176b in regards to
dmabuf support.
Plugins only call gst_vaapi_plugin_base_set_srcpad_can_dmabuf
once during startup, but may need to reset the other private
fields multiple times during negotiation. Thus, can_dmabuf
should be exempt from the resets.
Fixes#208
The old way make the one config for each profile/entrypoint pair,
which is not very convenient for description the relationship
between them. One profile may contain more than one entrypoints
to within it, so a set like data structure should be more suitable.
GstVaapiMiniObject and GstVaapiObject are deprecated.
This is the first step to remove them by porting GstVaapiSurface as
a GstMiniBuffer descendant.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
There are several internal functions with 'create' name, but they
don't create any new structure, but rather it initializes that
structure. Renaming those function to reflect better their purpose.
GstVaapiMiniObject and GstVaapiObject are deprecated.
This is the first step to remove them by porting GstVaapiCodedBuffer
as a GstMiniBuffer descendant.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
GstVaapiMiniObject and GstVaapiObject are deprecrated. This is the
first step to remove them, by porting GstVaapiImage as a
GstMiniObject.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
The GstVaapiMiniObject is obsolete and we need to replace it. This
patch turns GstVaapiContext into a plain C structure with its own
reference counting mechanism.
Also this patch removes unused overlays attributes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Issue detected by Coverity
`info_to_pack.h264_slice_header` is always allocated by
gst_vaapi_feipak_h264_encode(), thus checking it to free it afterwards
in doesn't make much sense. But it requires to be free on the error
path.
There may be a null pointer dereference, or else the comparison
against null is unnecessary.
In gst_vaapi_encoder_h264_fei_encode: All paths that lead to this null
pointer comparison already dereference the pointer earlier
Issue detected by Coverity
An unsigned value can never be negative, so this test will always
evaluate the same way.
In add_slice_headers: An unsigned value can never be less than 0
Issue detected by Coverity
There may be a null pointer dereference, or else the comparison
against null is unnecessary.
In gst_vaapi_encoder_h264_fei_encode: All paths that lead to this null
pointer comparison already dereference the pointer earlier
Issue detected by Coverity
`info_to_pak` variable in gst_vaapi_encoder_h264_fei_encode() is
declared in the stack, but it is free in
gst_vaapi_feienc_h264_encode() as if declared on the heap.
This patch initializes the structure and removes the free.
A non-heap pointer is placed on the free list, likely causing a crash
later.
In gst_vaapi_encoder_h264_fei_encode: Free of an address-of
expression, which can never be heap allocated.
Issue detected by Coverity
If the FEI mode is not handled the created resources should be
released and return and error code.
The system resource will not be reclaimed and reused, reducing the
future availability of the resource.
In gst_vaapi_encoder_h264_fei_encode: Leak of memory or pointers to
system resources
This issue was detected by Coverity.
If the function returns an error value, the error value may be mistaken
for a normal value.
In cb_mouse_event: Value returned from a function is not checked for
errors before being used
The base plugin public API function implementations determine
which pad should be passed to the internal helper functions.
Currently, only the base plugin static sinkpad and static
srcpad are supported/used. However, this change enables future
API functions to be added that can accept a pad (i.e. request pad)
from an element subclass (e.g. a GstVideoAggregator subclass).
Define a struct (GstVaapiPadPrivate) to encapsulate the
pad-specific data (i.e. buffer pool, allocator, info,
caps, etc.).
Add an interface to retrieve the data struct for a given
pad.
Finally, update the base plugin to use the data struct
throughout the implementation.
This will enable us to easily extend the base plugin in the
future to allow for N-to-1 pad subclasses (e.g. overlay/
composite).
We do not need to maintain a standalone list of decoder's output
template for raw formats and that is easy to make mistake(for
example, the AYVU is wrong in that list, should be VUYA).
Just use GST_VAAPI_FORMATS_ALL to replace the raw formats list for
src template.
We need to provide more precise template caps for postproc's src
and sink pads. The GST_VIDEO_FORMATS_ALL make all video formats
available which are really superfluous.
Don't try to decode until the first I-frame is received within the
currently active sequence. i965 H265 decoder don't show any artifact
but it crashes.
Fixes: #98
GST_VAAPI_FORMATS_ALL collects all declared formats in video-format
as a caps template string, and make them available in caps with
memory:VASurface feature.
Fixes: #199
