Optimize linking by only releasing the pad locks when there are link functions
installed on the pads.
Add some G_LIKELY here and there.
Move error paths out of the main code flow.
Keep track of installed number of probes to shortcut emission.
Allow NULL callbacks, this is useful for blocking probes.
Improve probe selection based on the mask, an empty mask for the data or the
scheduling flags equals that all probes match.
Add some more debug info.
Don't check the flushing flag in the probe callback handler, this needs to be
done before calling the handler.
Fix blocking probes.
Fix unit tests
Make the PadBlock callback take a GstBlockType parameter to handle the different
kind of stages in the pad block. This provides for more backwards compatibility
in the pad block API.
Separate blocking and unblocking into different methods, only blocking can do a
callback, unblock is always immediately. Also removed synchronous blocking, it
can always be implemented with a callback.
Make pad block call the callback as soon as the pad is not in use. This makes it
possible to make sure that when the callback is called, no activity is happening
on the pad and that no activity will ever happen until the pad is unblocked
again. This makes pad blocking work when there is no dataflow or after EOS and
greatly helps dynamic pipelines.
Move the probe handling right where we wait on the pad block. The two are
related but not the same and the probe can eventually influence the pad
blocking as we'll se later.
Fix up some broken unit tests or tests that fail with the new behaviour.
Rework _push_event() a little so that it drops events on blocking pads.
Make sure that events are forwarded when we unblock.
Add counter on the pad to keep track of busy pads.
Implement a default buffer-list function in case the element doesn't implement
one.
Also pass buffer-lists to the have-data signal, this allows us to remove some
backward compatibility code.
Change the sticky event array so that it contains a pending and an active event.
Events on the sinkpad are copied to the pending array and after the eventfunc
returned TRUE, moved to the active event. This allows us to queue new events
like when we do per-pad offsets without removing the currently active event.
Remove the active argument from the gst_pad_get_sticky_event() method, the
pending events are not something we want to expose.
When linking pads and when copying a segment event from the sourc pad to the
sinkpad, apply the src and sinkpad offsets to the segment base. Make sure that
we only modify the event stored on the sinkpad and never the one on the source
pad.
When changing the pad offset, perform the segment copy with the updated offsets.
When pushing a segment event, apply the srcpad offset before sending the event
to the peer pad.
This part is missing the adjustment of the segment event on the sinkpad, which
is for a later patch.
Add methods to adjust the offset. This will be used to change the segment events
with an offset so that we can tweak the timing of the stream on a per-pad base.
First store the sticky event on the sinkpad in the inactive state, then check
for the flushing flag. We want to have the events on sinkpads at all times,
ready to be activated when the pad becomes active.
Make a function to call the eventfunc and perform a caps check when we are
dispatching a caps event.
This makes sure that all code paths correctly check that the caps are
acceptable before sending the caps to the eventfunction.
Update the design docs with some clear rules for how sticky events are
handled.
Reimplement the sticky tags, use a small structure to hold the event and its
current state (active or inactive).
Events on sinkpads only become active when the event function returned success
for the event.
When linking, only update events that are different.
Avoid making a copy of the event array, use the object lock to protect the event
array and release it only to call the event function. This will need to check
if something changed, later.
Disable a test in the unit test, it can't work yet.
gst_pad_template_get_caps(), gst_pad_get_pad_template_caps()
and gst_pad_get_pad_template() return a new reference of the
caps or template now and the return value needs to be
unreffed after usage.
This reverts commit cf4fbc005c.
This change did not improve the situation for bindings because
queries are usually created, then directly passed to a function
and not stored elsewhere, and the writability problem with
miniobjects usually happens with buffers or caps instead.
Resetting the result is not necessary when resyncing because
pads that previously got the event will be skipped and we
need to consider the results of the previous pushes.
Fix replace of caps events when linking: we need to unref the old ones.
Make sure we pass error values around.
Move backward compat code into the default handler for now.
Don't use the buffer caps for negotiation anymore but use the CAPS events.
Make the _set_caps method produce the CAPS event, add some backward
compatibility code to trigger the setcaps functions on src and sinkpads.
Remove all negotiation code from the chain functions.
Don't use the GST_PAD_CAPS variable anymore to store the caps but retrieve the
caps from the sticky event array.
Remove the context again, adding an extra layer of refcounting and object
creation to manage an array is too complicated and inefficient. Use a simple
array again.
Also implement event updates when calling gst_pad_chain() and
gst_event_send_event() directly.
Pass the context downstream when it got updated.
Have two ways of informing downstream of events, do a full context update when
the CONTEXT_PENDING flag is set and simply forward the event otherwise.
Set the CONTENT_PENDING flag when linking pads.
We don't need to old context anymore when updating the context of a pad.
If there is no custom getcaps function on a sink pad, then changes in
downstream caps will never be propagated, so there is no point in trying to
renegotiate the capabilities.
This reverts commit 9ef1346b1f.
Way to much for one commit and I'm not sure we want to get rid of the pad caps
just like that. It's nice to have the buffer and its type in onw nice bundle
without having to drag the complete context with it.
Resetting the result is not necessary when resyncing because
pads that previously got the event will be skipped and we
need to consider the results of the previous pushes.
Copy the sticky events from the srcpad to the sinkpad when linking pads. Set the
STICKY_PENDING flag to make sure that the sticky events are dispatched before
pushing the next buffer to the element.
Add the sticky flag to events and a sticky index.
Keep sticky events in an array on each pad.
Remove GST_EVENT_SRC(), it is causing refcycles with sticky events, was not used
and is not very interesting anyway.
Remove pad_alloc and all references. This can now be done more efficiently and
more flexible with the ALLOCATION query and the bufferpool objects. There is no
reverse negotiation yet but that will be done with an event later.
As GST_SCHEDULING reports when buffers pass through pads due to
gst_pad_push calls, they are a good way of tracking the progress of
buffers through pipelines. As such, adding output of the buffer pointers
to these messages allows tracking of specific buffers, easing debugging.
Check the sinkpad for the flushing state before calling the chainfunction on the
pad. We do this by checking the cache (which is also cleared on the srcpad when
the sink is set to flushing).
Fixes#641928
Make the _get_caps functions behave like the _get_caps_reffed variants and
remove the _reffed variants. This means that _get_caps doesn't return a writable
caps anymore and an explicit _make_writable() is needed before modifying the
caps.
There is no need to cache the peer chainfunction as we can just as efficiently
get to it from the peer object. Also not caching the chain function works better
because then we automatically get the new chainfunctions when they change.
Build the cache while we push data. When we don't have a cache, we run the
slowpath and collect cacheable properties. When all conditions are met, keep the
cached data around so that we can more efficiently push data around.
Otherwise the source will stay at NULL, the event is passed to the
peerpad via gst_pad_send_event() and then the peerpad is set as
source of the event instead of the originating pad.
A flush-stop event would make a pad unflushing, causing it
to start acting as an activated pad. This, for example,
could lead to the chain function being called when stuff
isn't initialized.
This could happend when setting qtdemux to NULL while a seek
was being handled in the upstream filesrc (in push mode).
This patch makes it check if it is activated before setting
it to unflushing.
This is the same behaviour as if we had a pad template caps of
GST_CAPS_ANY on any of the pads (i.e. the actual check will be done
during caps negotiation).
Instead just check that the caps intersect with the pad template.
The elements should properly accept/refuse the caps in setcaps().
Shaves off calling the default implementation of acceptcaps which does
an expensive gst_pad_get_caps() (so if you have 50 of those elements in
a row, you'd be doing factorial(50) gst_pad_get_caps...).
Does not break any module unit test and most apps work fine.
https://bugzilla.gnome.org/show_bug.cgi?id=622740
Since everything GstXML related has been deprecated, we can now skip the
libxml includes from the public headers when GST_DISABLE_DEPRECATED is
defined.
See #463435.
Pipeline serialisation to and from XML is horribly broken for all
but the most simple use cases, and will likely never be fixed.
Make sure everyone playing around with these tools is aware of
this, to avoid frustration. See countless bug reports in bugzilla.
Fixes bug #622685.
A pad is 'negotiable' when its container element is in a state greater
than GST_STATE_READY
API:gst_pad_is_negotiable
API:gst_pad_set_negotiable
API:GST_PAD_NEGOTIABLE
https://bugzilla.gnome.org/show_bug.cgi?id=618644
Just truncate and then fixate. We check for empty caps in the begin and a
fixate-func that empties a caps would be broken. It also helps lazy caps impl.
in bug 618853 by avoiding the gst_caps_get_size().
We need to check the pad caps on the srcpad as well as on the sinkpad. Revert
this commit as it removes the check on the srcpad and can leave the srcpad
unnegotiated (or negotiated with wrong caps)
This reverts commit 07dc1e5b49.
This check is not necesarry as we are not negotiating anymore. And it can
be wrong if upstream can't produce this caps anymore, but downstream can
process them fine.
When we unblock a pad with the same user_data, the destroy callback is not
called. This leads to refcounting leaks that cannot be avoided. Instead always
call the destroy notify whenever we install a new pad block.
In particular, this fixes a nasty pad leak in decodebin2.
Also update the unit test to have more accurate comments and test the required
behaviour.
The default gst_pad_fixate_caps() previously would only fixate each individual
struct. In case there are multiple structs, the resulting caps would still not
be fixed. In the spirit of how individual structs are fixated, this patch
changes gst_pad_fixate_caps() to remove all but the first struct.
Fixes#595886
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
Post the structure change messages on the sinkpads of the elements. This allows
us to catch unlinked pads earlier without ending up with inconsistent element
degrees.
The internal links function is deprecated since some time and
there already were GST_REMOVE_DEPRECATED markers in the source file,
now add them to the header too.
Fixes bug #592209.
This makes the generated code faster since:
* It won't have to read an undirect value (which will most likely be
outside of the L1/L2 cache)
* We know that value never changes (the compiler has no clue that it doesn't).
Move MT safety to main description (it does not belong to Return: or Since:
statement). Add a few missing return docs. Downgrade a normal comment froma doc
comment. Fix a doc header to only contain symbol name.
Reuse buffer code for bufferlists. Not sure if this measurably impacts performance
for the simple buffer case, if it does after doing some benchmarks, we can
decouple it later.
Fixes#572285
Post a stream-status message indicating that a new task was created so that the
application has a chance to change the properties of the task.
Fix unit test to take into account the new ref of the message.
Move the gst_pad_can_link() implementation from gstutils to gstpad and use
gst_pad_link_prepare() to make it work correctly and also check the caps.
Make the broken implementation in gstutils static.
Small cleanups in the _get_fixed_caps() function.
Fixes#575682.
Keep track of when a new callback is installed in the callback and call the new
callback in that case.
Add unit test for checking pad blocking.
Fixes#573823.
When de/activating a pad in pull mode the pad needs to de/activate the
peer pad it is connected to, failure to be able to do this in activation mode
is an error.
However if there is no peerpad, we can still deactivate the pad correctly and
assume the application will deactivate the unlinked peer pad eventually.
Fixes#574163.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_configure_src):
When we use gst_pad_alloc_buffer() without wanting to set the caps we
also don't need to check if the caps are compatible because the caller
presumably is going to perform its own custom checks. Fixes some cases
where basetransform elements would error out when it was not needed.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_range), (gst_pad_pull_range):
Revert a patch from 21 months ago that broke caps negotiation in pull
mode. Basically, having a buffer pass over a pad will trigger the
setcaps function when caps change, just like in push mode.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes#510354.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked):
Original patch by : Simon Descaries
Fix small refount leak in caps compatibility check.
Fixes#551676.
Original commit message from CVS:
* gst/gstpad.c: (add_unref_pad_to_list),
(gst_pad_get_internal_links_default):
Add fallback when calling the deprecated function on an element that
implements the new internal_link handler.
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* docs/gst/gstreamer-sections.txt:
* win32/common/libgstreamer.def:
* gst/gstpad.c: (gst_pad_init),
(gst_pad_set_iterate_internal_links_function),
(int_link_iter_data_free), (iterate_pad),
(gst_pad_iterate_internal_links_default),
(gst_pad_iterate_internal_links), (gst_pad_get_internal_links):
* gst/gstpad.h:
Add threadsafe replacement functions for getting internal links of an
element. Deprecate the old internal links functions.
API:GstPad::gst_pad_set_iterate_internal_links_function()
API:GstPad::GstPadIterIntLinkFunction
API:GstPad::gst_pad_iterate_internal_links()
API:GstPad::gst_pad_iterate_internal_links_default()
* gst/gstghostpad.c: (gst_proxy_pad_do_iterate_internal_links),
(gst_proxy_pad_init):
Implement threadsafe internal links.
* tests/check/elements/tee.c: (GST_START_TEST), (tee_suite):
Unit test for internal links on tee. See #549504.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default):
Make the internal links function less thread-unsafe and add some
comments, dunno why.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_acceptcaps_default),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full):
Remove silly redundant debug.
Add some more debug info.
Clarify the docs regarding new caps received from pad_alloc.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Only sanity-check the buffer size if requested_caps == buffer_caps
(ie. don't take pad caps into account, they're not relevant here)
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_event_default_dispatch):
The default event function on a sinkpad should return TRUE when
there are no internal links but should collect the return values from
the internal links otherwise.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Move size sanity check to the right place: downstream may return
a buffer with a smaller size if the buffer caps are different than
the requested ones, as may happen when doing reverse negotiation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_buffer_alloc_unchecked):
Add sanity check to make sure we don't get smaller buffers
than requested (and fallback to normal buffer alloc if we do).
Original commit message from CVS:
* gst/gstconfig.h.in:
Add 'id' for example.
* gst/gstpad.c:
* gst/gstutils.c:
* plugins/elements/gstfdsink.c:
Link to signals. Doc and comment fixes.
Original commit message from CVS:
* gst/gstpad.c:
* tests/check/gst/gstpad.c:
Be sure that we have a new copy of the caps and not
reffed caps from a template
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_dispose):
Really unlink the peer pad instead of setting the peer pointer to NULL
when we dispose the pad.
This correctly calls the unlink functions and makes sure that the peer
does not have a handle to invalid memory. See #504671.
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add testsuite for above case.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_peer_query):
* gst/gstpad.h:
Add function to perform a query on the peer of a pad.
API: gst_pad_peer_query()
Original commit message from CVS:
* docs/design/part-TODO.txt:
Add some more TODO items
* gst/gstbin.c: (find_message), (gst_bin_change_state_func):
Improve debugging.
* gst/gstcaps.c: (gst_caps_intersect):
Optimize trivial intersection case between identical caps pointers.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func):
* gst/gstpad.c:
Fix spelling and grammar mistakes.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_push):
Show the caps change in the log to help spotting the case of not
exactly matching caps.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_caps_unlocked),
(gst_pad_acceptcaps_default), (gst_pad_configure_sink),
(gst_pad_configure_src):
Added simple version of improved caps checking. It was previously
assumed that a setcaps function would check the validity of the caps but
people prefer us to check caps against the template automatically.
Fixes#421543.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't get empty paths on the PATH variables
* gst/gstpad.c (gst_pad_is_active, gst_pad_set_blocked_async):
Don't format for the uncommon terminal width of 84 characters.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full),
(gst_pad_chain_unchecked), (gst_pad_push):
Revert last commit. This needs some more thoughts.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps), (gst_pad_alloc_buffer_full),
(gst_pad_chain_unchecked), (gst_pad_push):
Check in set_caps if the caps are compatible with the pad and remove
two functions that are redundant now. Fixes#421543.
Original commit message from CVS:
Patch by: <syrjala at sci dot fi>
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_send_event):
Fix possible deadlock if pad eventfunc is not specified. Fixes#421177.
Improve debugging.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default),
(gst_pad_dispatcher):
Improve debugging of default pad dispatcher and query functions.
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Allow
getrange() to return buffers with other caps, while we fix
demuxers and typefind, or otherwise change part-negotiation.txt.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_activate_pull): Refuse to activate unlinked
sink pads in pull mode. In addition to being correct, fixes
filesrc ! decodebin ! identity ! fakesink.
(gst_pad_get_range, gst_pad_pull_range): Don't call
gst_pad_set_caps() if the caps changes; instead error out with
GST_FLOW_NOT_NEGOTIATED, as discussed in part-negotiation.txt.
Original commit message from CVS:
2007-01-10 Andy Wingo <wingo@pobox.com>
* docs/design/part-negotiation.txt: Update with, um, one way that
pull-mode negotiation might work?
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_get_allowed_caps): Remove the restriction
that the pad must be a src pad; makes sense to call it the other
way in pull mode, and the logic is symmetric anyway.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Set caps
on the pads if necessary, as in push()/chain(). Update docs.
Shouldn't affect existing pull() usage as it is currently only
being used on buffers without caps.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_add_pad):
* gst/gstghostpad.c: (gst_ghost_pad_new_full):
* gst/gstpad.c: (gst_pad_init):
Set pads to FLUSHING when they are created. Check, warn and fix when a
demuxer adds an inactive pad to itself when running. Fixes#339326.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c:
Fix documentation for gst_pad_dispatcher. Fixes#374475.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c: (gst_pad_init), (pre_activate),
(gst_pad_set_blocked_async), (gst_pad_acceptcaps_default),
(gst_pad_accept_caps), (handle_pad_block), (gst_pad_push_event):
Some small cleanups. Improve debugging.
* gst/gstpad.h:
Signal all waiting threads with a broadcast instead of just one.
Fixes#369942.
Original commit message from CVS:
* docs/design/part-events.txt:
Update some docs.
* docs/design/part-block.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
Revert BLOCKING patch, it tries to be smart without really having a
clear idea what or how. So, now we discard all FLUSHING events again on
a blocking pad. Should fix gnonlin again.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
Patch by: Sebastien Cote <sebas642 at yahoo dot ca>
* gst/gstpad.c: (gst_pad_get_caps_unlocked),
(gst_pad_save_thyself):
Update some docs.
Write pad direction in XML output. Fixes#345496.
Original commit message from CVS:
* docs/design/part-block.txt:
Further explain the use of flushing on blocked pads.
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
* gst/gstpad.h:
Added new GstPadFlag : GST_PAD_BLOCKING.
Adds the notion of pads really blocking, which enables to properly
handle FLUSH_START/FLUSH_STOP events on blocked pads.
Fixes#358999
API: gst_pad_is_blocking()
API: GST_PAD_IS_BLOCKING() macro
API: GST_PAD_BLOCKING GstPadFlag
Original commit message from CVS:
* gst/gstinfo.c: (_gst_debug_nameof_funcptr):
Fix locking order, handle NULL function values properly.
* gst/gstinfo.h:
Fix docs.
* gst/gstpad.c: (gst_pad_buffer_alloc_unchecked):
Initialised variable before using it and fix debug statement to
print the address of the function rather than the address of the
variable on the stack holding the address of the function.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_start_task), (gst_pad_pause_task),
(gst_pad_stop_task):
Improve debugging for task functions.
* gst/gsttask.c: (gst_task_func), (gst_task_set_lock),
(gst_task_start), (gst_task_pause), (gst_task_join):
Make sure that the task function started and finished after a
join().
Don't try to push the task function on the threadpool multiple
times.
Improve the g_warning message with some useful suggestions
about how to fix the problem.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gsttask.c: (gst_task_join):
Small doc updates.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_stop_task):
When pad (de)activation failed for some reason, restore the old
activation mode and set the pad to flushing instead of assuming the
pad is deactivated.
If the _task_join() failed, reinstall the task on the pad so that it can
be stopped later and return an error.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_dispose),
(gst_pad_get_property), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_set_blocked_async),
(gst_pad_set_activate_function),
(gst_pad_set_activatepull_function),
(gst_pad_set_activatepush_function), (gst_pad_set_chain_function),
(gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_internal_link_function), (gst_pad_set_link_function),
(gst_pad_set_unlink_function), (gst_pad_set_getcaps_function),
(gst_pad_set_acceptcaps_function),
(gst_pad_set_fixatecaps_function), (gst_pad_set_setcaps_function),
(gst_pad_set_bufferalloc_function), (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_get_caps),
(gst_pad_peer_get_caps), (gst_pad_accept_caps),
(gst_pad_peer_accept_caps), (gst_pad_set_caps),
(gst_pad_configure_sink), (gst_pad_configure_src),
(gst_pad_get_allowed_caps), (gst_pad_get_negotiated_caps),
(gst_pad_buffer_alloc_unchecked), (gst_pad_alloc_buffer_full),
(gst_pad_query), (gst_pad_load_and_link), (handle_pad_block),
(gst_pad_chain_unchecked), (gst_pad_push), (gst_pad_get_range),
(gst_pad_send_event):
Use _DEBUG_OBJECT when it makes sense.
Protect GST_PAD_CAPS with the OBJECT_LOCK.
Small cleanups and code reflows.
Avoid caps refcounting in _accept_caps.
Refactor alloc_buffer so that the code performed on the peer is in a
separate function. Also if the pad does not implement a buffer alloc
function, we should still check if the pad is flushing before falling
back to the default allocator.
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_activate_pull),
(gst_pad_activate_push):
Use some more macros where it makes sense.
Allow pad mode switching instead of asserting. When a pad
is activated in one mode and we activate it in another,
deactivate it first before activating it in a different mode.
Fixes#329198.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_chain_unchecked), (gst_pad_chain),
(gst_pad_push), (gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
* gst/gstpad.h:
Lots of comments and docs added to the pad functions.
Flesh out the expected behaviour of the get_range() functions.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_push):
Restore acceptcaps checking behaviour now that good plugins have
been released.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_link):
Must set peer pads before calling the link function, otherwise
a task started from a link function might get a flow-not-linked
result when trying to push because the other thread where the
linking happens hasn't had a chance to set the peers yet. This
might happen for example when a queue gets linked to a downstream
element, as queue starts a streaming task when its source pad
gets linked. Happens in real life when playing back flac/musepack
files in playbin (#332390).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_property):
Use g_value_get_object() instead of g_value_dup_gst_object(),
to avoid double-reffing the pad template (which we then sink,
so this worked previously if (and only if) the pad template
was floating.
* gst/gstpadtemplate.c: (gst_pad_template_init),
(gst_pad_template_pad_created):
Never return floating references to pad templates, create
them as initially-sunken.
Document an extra function (and make this stop sinking our
pad template, since that is now guaranteed to do nothing,
since we created it sunken).
* gst/gstghostpad.c:
Fix docs typo.
Original commit message from CVS:
2006-04-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_blocked_async): More debug.
* libs/gst/base/gstbasetransform.c
(gst_base_transform_sink_eventfunc): When resetting our segment on
FLUSH_STOP, also update the flag saying we haven't seen a
newsegment.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_alloc_buffer_full),
(gst_pad_push):
Don't leak buffers, caps and pads on negotiation errors.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_alloc_buffer_full),
(gst_pad_push):
Don't pound the cpu to pieces by checking get_caps when accept_caps
is called with the same caps as the pad already has.
Use GST_DEBUG_OBJECT when outputting caps change information.
Original commit message from CVS:
* gst/gstbuffer.h:
Documentation fix.
* gst/gstpad.c: (gst_pad_init), (gst_pad_acceptcaps_default),
(gst_pad_accept_caps), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_chain), (gst_pad_push):
Make the default acceptcaps behaviour be to check the requested
caps against the gst_pad_get_caps output.
Ensure that gst_pad_accept_caps is used to check caps when a pad
doesn't have a setcaps function, so that pads automatically refuse
caps that they don't allow in their pad template. (Fixes#332986)
When a buffer with attached caps is pushed, ensure that the source
pad receives those caps even if the element didn't call
gst_pad_set_caps first.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_blocked_async):
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe): Make those function act on the
ghostpad target when it's a ghostpad. (Closes#331727)
------------------------------------------------------
Original commit message from CVS:
2006-02-19 Julien MOUTTE <julien@moutte.net>
* gst/gstinfo.h: Add GST_STR_NULL to the second string.
* gst/gstpad.c: (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_getcaps_function): GST_DEBUG_PAD_NAME evaluates to
2 strings. You can't use the STR_NULL macro on that.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_getcaps_function)
* gst/parse/grammar.y: (gst_parse_found_pad), (gst_parse_perform_delayed_link)
Fixed NULL pointer used in GST_CAT_DEBUG using GST_STR_NULL macro
So now, we can use --gst-debug-level=5 on Windows
* win32/common/libgstcontroller.def:
Added export of gst_controller_init
* win32/vs6/libgstcontroller.dsp:
Fixed Release post build configuration
Original commit message from CVS:
* gst/gstcaps.c:
Clarify behaviour of _is_equal() when passing NULL parameters.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_set_caps):
Cleanups. Don't unref NULL caps.
When setting the same caps, protect caps of the pad with
proper lock.
Use full functionality of _is_equal() when comparing caps.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gst.h: Include glib-compat.h.
* gst/glib-compat.h: Add G_GNUC_NULL_TERMINATED.
* gst/glib-compat.c: Include the public and the private header.
* gst/glib-compat-private.h: Copied here from glib-compat.h.
* gst/gstvalue.c:
* gst/gstpad.c:
* gst/gstregistryxml.c: s/glib-compat/glib-compat-private/.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_send_event): Doc more. Take stream lock on
behalf of event function if necessary. It should no longer be
necessary to take the stream lock in pad's event functions. Fixes
#320299.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_new_from_static_template):
* gst/gstpad.h:
add gst_pad_new_from_static_template functions
* gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
* gst/elements/gsttee.c: (gst_tee_init):
and use them
Original commit message from CVS:
* gst/glib-compat.c: (g_value_dup_gst_object):
* gst/glib-compat.h:
* gst/gstpad.c: (gst_pad_set_property):
use gst_object_ref when setting the pad template; this will
trigger the pad template leaks on GLib 2.6 and the slaves
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/gstpad.c: (gst_pad_get_property):
GST_PAD_PAD_TEMPLATE(pad) gets the pad template, while
GST_PAD_TEMPLATE(pad) does a cast. We want the former here.
(#321452)
Original commit message from CVS:
2005-11-14 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_active): Change docs; parent's
STATE_LOCK not necessary. Fixes#311489.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_caps), (gst_pad_peer_get_caps):
While checking the flag for reentrancy in the gstcaps function
is nice to detect recursive invocations, it also makes it
impossible to call getcaps from multiple threads, which must be
possible. So, checking for recursive calls has to go.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added check for bug #317341
* gst/gstbuffer.c:
* gst/gstbuffer.h:
Some more spiffifying.
* gst/gstghostpad.c: (gst_ghost_pad_do_link):
Call peer linkfunction if we are a source pad. Totally fixes
#317341
* gst/gstpad.c:
Update docs, source pads should call the peer linkfunction
so they can atomically perform the pad link.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_blocked_async):
comparing a flag and a gboolean rarely returns coherent results...
Added two characters (!!) to make that work correctly.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer), (handle_pad_block),
(gst_pad_push), (gst_pad_push_event):
Unlock blocked pads when they are flushed.
Original commit message from CVS:
2005-10-16 Julien MOUTTE <julien@moutte.net>
* gst/gstcaps.c: (gst_caps_intersect): Fix a bad bug with a
simple
fix. Because of unsigned ints, caps intersection was going nuts
and
trying to access structures with G_MAXUINT index. That fixes
videotestsrc ! ffmpegcolorspace ! fakesink
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked): logs
consistency.
Original commit message from CVS:
2005-10-12 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_pause_task): Actually return FALSE if
there is no task. Shouldn't affect any code, as nothing in our
plugins checks this return value.
(gst_pad_stop_task): Also take the stream lock if the pad has no
task. Docs updated.
Original commit message from CVS:
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_activate_pull), (gst_pad_activate_push):
Cleanup activation code. Reset old state if
activation failed.
Original commit message from CVS:
2005-10-11 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (pre_activate): Renamed from pre_activate_switch,
take the mode we're going to as an arg. Go head and set the mode
and flushing flags now, so that if the activate function starts a
thread all the flags will be in the right state.
(post_activate): Renamed also. Just handle making sure streaming
finishes for the deactivation case, and setting the deactivated
mode.
(gst_pad_set_active): Complain loudly if deactivation fails.
(gst_pad_activate_pull): Adapt to pre/post_activate changes.
(gst_pad_activate_push): Adapt to pre/post_activate changes,
remove the terrible hack.
Original commit message from CVS:
* docs/design/part-states.txt:
Some more docs.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_recalc_state),
(gst_bin_change_state_func), (bin_bus_handler):
Doc updates. Don't distribute the same clock over and over again.
* gst/gstclock.c:
* gst/gstclock.h:
Doc updates.
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark),
(gst_pad_get_type), (gst_pad_push), (gst_pad_push_event),
(gst_pad_send_event):
* gst/gstpad.h:
Make probe emission threadsafe again.
Register quarks and move _get_name() from utils.
Doc updates.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_change_state), (gst_pipeline_provide_clock_func):
Only redistribute the clock of it changed.
* gst/gstsystemclock.h:
Doc updates.
* gst/gstutils.c:
* gst/gstutils.h:
Moved the _flow_get_name() to GstPad.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_event_default_dispatch):
give events a chance to be handled by event probes when the pad
is not linked
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_push), (gst_pad_push_event):
emit have-data before checking for peers. This allows
for probe handlers to connect elements. This helps autopluggers.
* check/gst/gstpad.c: (GST_START_TEST), (_probe_handler),
(gst_pad_suite):
add six checks, linked/unlinked with no/true/false probe
Original commit message from CVS:
2005-10-03 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_activate_push): There is a race condition
whereby calling a pad's activatepush() function can start a thread
that starts to push or pull before the pad gets the FLUSHING flag
unset. Hack around it by holding the stream lock until the flag is
set. Need to replace this with a proper solution. Together with
the ghost pad fixes, this fixes mp3 playing/tagreading.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_change_state):
Only error is an error.
* gst/gstbin.c: (gst_bin_change_state):
Better debugging.
* gst/gstpad.c: (gst_pad_alloc_buffer), (gst_pad_chain):
Also call pad_block in pad alloc.
* gst/gstutils.c: (gst_flow_get_name):
Better debugging.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_change_state):
Make state change function use 3 queues again, we were
adding elements in the wrong order.
* gst/gstghostpad.c: (gst_ghost_pad_do_unlink):
Some debug info,
* gst/gstpad.c: (gst_pad_dispose):
Added some debug info first.
Original commit message from CVS:
* common/gtk-doc.mak:
don't fail on building XML, FC4 slave shows a bunch of doc
missing bits that I don't get
* gst/gstpad.c:
* gst/gstpipeline.c:
* gst/gststructure.c:
some doc updates
Original commit message from CVS:
* docs/README:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_chain):
* gst/gstpluginfeature.c:
* gst/gstutils.c:
various doc updates
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
change an assert into an error until it gets fixed properly
Original commit message from CVS:
2005-09-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstutils.c: New file.
(test_buffer_probe_n_times): A simple buffer probe test. More to
come, foolios.
* gst/gstutils.c (gst_pad_add_buffer_probe): Connect to
have-data::buffer, not have-data.
(gst_pad_add_event_probe): Likewise for have-data::event.
(gst_pad_add_data_probe): More docs. The part about 'resolving the
peer' isn't quite right yet though.
(gst_pad_remove_buffer_probe, gst_pad_remove_event_probe)
(gst_pad_remove_data_probe): Change to take the guint handler_id
as their arg, not the function+data, which is more glib-like.
* gst/gstpad.c (gst_pad_emit_have_data_signal): Add a detail to
the signal emission to indicate if the data is a buffer or an
event.
(gst_pad_get_type): Initialize buffer and event quarks.
(gst_pad_class_init): have-data is now a detailed signal, yes it
is.
Original commit message from CVS:
* check/gst/gstpad.c: (GST_START_TEST), (name_is_valid),
(gst_pad_suite):
add tests for valid pad naming
* gst/check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func):
add ASSERT_WARNING
remove printing of code, it is fragile when the code contains
% and the line number is enough info
* gst/check/gstcheck.h:
* gst/gstpad.c: (gst_pad_template_new):
fix memleaks
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer):
Catch misbehaving pad_alloc functions that don't
set up caps and do it for them.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_pad_buffer_alloc):
Add comment.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Make state change function thread-safe.
* gst/gstpad.c: (gst_pad_alloc_buffer):
Set offset on generic buffer allocated by fallback.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/gstelement.sgml:
* gst/gstpad.c:
* libs/gst/controller/gst-controller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_new),
(gst_controller_find_controlled_property):
run the wingo-magic script against the docs
Original commit message from CVS:
* gst/base/gstadapter.c: (gst_adapter_flush):
Flushing out 0 bytes is ok for this function.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
no newsegment gives a warning and sets the start/stop to
invalid.
* gst/base/gstbasetransform.c: (gst_base_transform_change_state),
(gst_base_transform_set_passthrough):
Some debug info.
* gst/gstminiobject.c: (gst_mini_object_ref):
Check refcount here too.
* gst/gstpad.c: (gst_pad_init):
Pads are initially flushing and refusing data.
* gst/gstutils.c: (gst_element_link_pads_filtered):
When adding a capsfilter element make sure it has the
same state as the parent bin.
Original commit message from CVS:
* gst/gstbin.h:
removed ';' from the end of macro defs
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/.cvsignore:
* gst/gstbus.h:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_set_state), (activate_pads),
(gst_element_save_thyself):
* gst/gstevent.c: (gst_event_new_newsegment):
* gst/gstevent.h:
* gst/gstiterator.c:
* gst/gstiterator.h:
* gst/gstpad.c:
* gst/gstprobe.h:
* gst/gstutils.c: (gst_pad_query_convert):
* gst/gstutils.h:
fixed parameter name mismatches between source, header and docs
added some more docs, resolved the last batch of unused elements in
docs (now someone needs to doc them)
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Make sure all tasks are stopped.
* check/gst/gstbin.c: (GST_START_TEST):
Unref after usage for proper valgrinding.
* gst/gstpad.c: (gst_pad_finalize), (gst_pad_stop_task):
Really wait for the task to stop before destroying the
mutex.
* gst/gstqueue.c: (gst_queue_sink_activate_push),
(gst_queue_src_activate_push):
Small cleanups. Don't stop the task when we did not start
it.
* gst/gsttask.c: (gst_task_get_type), (gst_task_init),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause),
(gst_task_join):
* gst/gsttask.h:
Protect the stream lock with the object lock.
Disallow setting the stream lock when running.
Add cleanup_all to wait for the threadpool to finish.
Remove code to autoallocate a mutex if none was provided.
Add _join() to wait for a task to stop.
Protect the thread pool with a global lock.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_new_and_alloc):
some debugging
* gst/gstcaps.h:
whitespace fixes
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_alloc_buffer):
more debugging
* gst/gststructure.c: (gst_caps_structure_fixate_field_boolean):
* gst/gststructure.h:
add a fixate function for booleans; add a FIXME that these func
names should probably be gst_structure_fixate_*
Original commit message from CVS:
* check/Makefile.am:
clean up environment for when registry gets built versus
when actual tests are run; valgrind seems to not report
leaks if GST_PLUGIN_PATH is set to some specific values
* check/gst/gstbin.c: (GST_START_TEST):
add more refcounting checks; maybe this exposes a
preroll lock bug ?
* common/check.mak:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/check/gstcheck.h:
* gst/gstbin.c: (bin_element_is_semi_sink), (gst_bin_get_state),
(gst_bin_change_state):
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_chain):
add/fix debugging/whitespace
Original commit message from CVS:
* check/Makefile.am:
set GST_TOOLS_DIR
* gst/check/gstcheck.c: (gst_check_message_error):
* gst/check/gstcheck.h:
add a fail_unless_equals_int
add fail_unless for error messages
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Small update.
* gst/gstbin.c: (unlink_pads), (gst_bin_add_func),
(gst_bin_remove_func):
Unlinking pads while holding the bin LOCK is not a good
idea.
* gst/gstpad.c: (gst_pad_class_init),
(gst_pad_link_check_hierarchy), (gst_pad_get_caps_unlocked),
(gst_pad_accept_caps), (gst_pad_set_caps), (gst_pad_send_event):
No prob setting template after creating the pad.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added some more tests for wrong hierarchy
* docs/design/part-overview.txt:
Some updates.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_dispose):
Cleanups.
* gst/gstelement.c: (gst_element_remove_pad), (gst_element_seek),
(gst_element_dispose):
Some more cleanups.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_check_hierarchy), (gst_pad_link_prepare),
(gst_pad_get_caps_unlocked), (gst_pad_accept_caps),
(gst_pad_set_caps), (gst_pad_send_event):
Check for correct hierarchy when linking pads. Moving to
strict requirement for ghostpads when linking elements in
different bins.
* gst/gstpad.h:
Clean ups. Added WRONG_HIERARCHY return value.
Original commit message from CVS:
* gst/gstpad.c: (fixate_value), (gst_pad_default_fixate),
(gst_pad_fixate_caps):
Implement default fixation once again, so that gst_pad_fixate()
actually does anything at all. This probably needs to be some
sort of a last resort, and use profile-based fixation first, but
since that doesn't exist yet, this is the best we have. Fixes
visualization in Totem.
Original commit message from CVS:
Removed plugable schedulers.
Removed Scheduler/Manager from elements.
Removed gsttypes.h, rearranged includes.
Removed dependency pad<->element, element<>pipeline, and
various others, fix includes.
implement gst_pad_get_parent() with gst_object_get_parent()
Make GstTask sefcontained.
Fix _get_state() on GstBin, it did not return ASYNC with a 0
timeout.
Fix endless loop in iterator_fold_with_resync.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Added more debug info in the negotiate process.
* gst/gstmessage.h:
Prepare for segment playback.
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_set_caps):
Better debugging.
* gst/gstutils.c:
Some more docs.
* tools/gst-launch.c: (main):
NULL pipeline on errors.
