Make sure that the requested stream selection isn't identical to the current
one. If that's the case, just carry on as usual.
This avoids multiple `streams-selected` posting ... when the selection didn't
change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2185>
* glimagesink is not a recommended one on Windows
* Remove directdrawsink section
* d3dvideosink is legacy and should not be recommended
* Add d3d11videosink part
* directsoundsink should be deprecated
* Add wasapisink/wasapi2sink part
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2144>
The current way names the level by the number of B frames it contains, the
less it contains, the higher level it is. So the non ref B frames are in the
lowest layer and the B frames in the highest level refer to I/P frames.
But the widely used way is just the opposite, the ref B frames are in the
lower level and non ref B frames are at the highest level.
The is just a terminology change, and does not have any effect for compression
result and quality.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2149>
It doesn't matter for measurement purposes whether receiving them takes
a while and various PTP servers are not prioritizing to send them,
causing them to be dropped unnecessarily and preventing proper
synchronization with such servers.
This is especially a problem if the RTTs in the network are very low
compared to the additional delay imposed by the server.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2161>
timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>
In case of re-syncing (i.e. moving to another partition to avoid too much of an
interleave), there was previously no checks to figure out whether a given
partition was already fully handled (i.e. when coming across it again after a
previous resync).
In order to handle this at least for single-track partitions, check whether we
have reached the essence track duration, and if so skip the partition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>
The essence track position should only be overriden if we sucesfully switched to
another position. In case of EOS we do not want to override it else we would
increase the track position *again* at the end of this function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>
This field is used by DXVA/NVDEC/VA, and each specification
describes (NVDEC is not well documented) that it's the number of
bits used in short_term_ref_pic_set().
DXVA doesn't explicitly mention that whether the size of
emulation preventation bytes (EPB) is inclusive or not, but
VA is clearly specifying that it's the size after removing
EPB. Excluding EPB size here makes more sense therefore.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1930>
The documentation could be read to mean that the caller continuous to
'own' the buffer, and that there is some other mechanism to find out
when to unref it.
Clarify that "not taking ownership" here means "taking a reference",
and specify that you can unref it at any time after calling the
function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2110>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
When building for Android, chances are that gstreamer is going to be
loaded from Java using System.loadLibrary(). In that case we can
initialize GStreamer (including static plugins), redirect log functions,
etc.
This code is copied from cerbero because it can be used with
gstreamer-full-1.0 too. Cerbero needs to be adapted to drop that code
and generate gst_init_static_plugins() function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/617>
Added GstVaFeature enum type, and new parameter for VA allocator's
set_format() and get_format(). Also added a new parameter in VA pool
gst_va_pool_new_with_config() and
gst_buffer_pool_config_set_va_allocation_params().
This new parameter will define if derived images will by used for
buffer mapping.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2057>
Expose description of vendor for user information, similar to
the description property of d3d11device.
Also, set description and DRM device path on GstContext structure
so that user can read them and it will be printed on terminal
when gst-launch-1.0 is used
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2064>
The console HANDLE will be keep signalled state unless application
reads console input buffer immediately. So we should read and flush
console input buffer from the thread where the event is signalled,
instead of GMain context thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2058>
Configure playsink tried element with the bus of the main pipeline.
That tried element can be a gl video sink, which would benefit from being
able to propagate context messages to the main pipeline and have other
internal pipeline elements configured with it. Having different elements
configured with the same GL context allows them to share buffers with
video/x-raw(memory:GLMemory) caps and achieving zero-copy.
Thanks to Alicia Boya García <aboya@igalia.com> for her work co-debugging
the issue and contributing to find a solution.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2056>
Sources that can internally handle buffering shouldn't have yet-another
buffering element after it. This can be simply detected by checking if it can
answer a TIME BUFFERING query just after creation.
If that is the case, we can expose the element source pads directly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
By default, the classification is
"Converter/Filter/Colorspace/Scaler/Video/Hardware", but if VA
post-processor driver supports either color balance, skin tone
enhancement, sharpening or noise reduction, "Effect" is added.
Thus, if vapostproc ranking is raised, it can be chosen by
autovideosink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2066>
g_signal_disconnect*() doesn't stop any existing callbacks from running
which means that if the notify::state callback is in progress in one
thread and the data channel object is finalize()ed in another thread,
then there could be a use-after-free trying lock the data channel
object.
We can't reasonably use a GWeakRef as we don't have a 'parent' object to
free the GWeakRef after the data channel is finalized. This is also
complicated by the fact that the application can hold a reference to the
data channel object that would live beyond the lifetime of webrtcbin
itself.
We solve this by implementing a ghetto weak-ref solution internally with
a list of outstanding data channels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
If things progress fast enough, some state changes may not be seen be
the waiting code.
Fix by:
1. keeping a list of all the state changes
2. waiting checks each entry and if the relevant state is found, all
states up to and including then are removed.
This ensures that any waits will see all the state sets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Input (sink pads) is the already-ssrc-muxed stream with the relevant rtp
sdes header extensions already applied:
- mid
- stream-id
- repaired-stream-id
Output (src pads) have the pads separated into individual ssrc's as
that's what rtpbin gives us.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Each rtpbin exposed recv_src pad is now exposed as webrtcbin src_%u pad
now with no meaining applied to the value of %u. Previously this used
to mean the mline in the SDP. If this is is still required, then the
transceiver can be retrieved from the pad and the "mlineindex" property
from the transciever. The "mid" is also retrievable from the
transceiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
When creating a transceiver when creating an answer, the media kind of the
transceiver was never set correctly initially. This would lead to a
GST_WARNING being produced about changin a transceiver's media kind.
Fix by retrieving the GstSDPMedia kind from the offer instead as the answer
GstSDPMedia has not been set as the answer caps have not been chosen yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
In order to other plugins use gstva objects, such as allocators and buffer
pools, this merge request move them from the va plugin to the gstva library.
This objects are not exposed in <gst/va/gstva.h> since they are not expected
to be used by users, only by plugin implementators.
Because of the surface copy design, which is used to implement allocator's
mem_copy() virtual function, depends on the vafilter, which is kept inside
the plugin, memory copy through VAPosproc is disabled and removed temporarly.
Also added some missing parameter validation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
Untabifying header file.
The logging category was moved from the plugin generic category to
the display category. It can argue that video formats hacks are
display dependant.
Added validations for input parameters.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
... and add more encoding options.
QSV API supports dynamic bitrate change without IDR insertion.
That's more efficient way of runtime encoding option update
than starting from new sequence with IDR per bitrate option change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>
FFMPEG 5+ doesn't allow overriding the codec anymore (causes a segfault if you
attempt to do that). But the best part is ... that with the current caps
implementation in pad template and gst_ffmpeg_caps_to_codecid() we would never
replace it by anything different than the existing codec id.
Fixes#1054
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2052>
../gst-libs/gst/mpegts/gst-dvb-section.c:206:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_events = 12;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:365:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_streams = 12;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:543:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_streams = 12;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:885:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_services = 8;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:1316:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_services = 8;
^
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
Check that `self` and `self->callback` are defined. `self` can be set to
`NULL` in `remove_listener`, and `self->callback` can be set to `NULL`
inside `gst_amc_surface_texture_jni_set_on_frame_available_callback`.
This can cause a segfault since the Java object can outlive the C
object, and call the callback after `remove_listener` is called.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2024>
Use the return value from gst_element_link_pads() and gst_bin_add()
Fixes:
../ext/gl/gstglmixerbin.c:305:12: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
gboolean res = TRUE;
^
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2038>
Produce an error if we try to use the feature of holding capture buffer
but it is not supported by the driver. Ingoring this can lead to stalls
as the driver will run-out of capture buffer to decode into. This
affects slice decoders but also split-field interlaced decoding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
This flag is set when the stream is interlaced and the specific
slice is made of single parity fields rather the paired at the
macroblock layer. This is rarely needed in late decoding process
but the Rockchip RKVDEC HW interface requires it, hence needs to
be passed through V4L2 Stateless interface.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
The official releases of libxml2 have been migrated to gitlab where
they are published for download via HTTP instead of FTP. Besides
adapting to the new location we now also get the benefit that the
tarball can be downloaded in restricted networks where FTP might be
blocked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2020>
Some problematic H265 stream may miss the reference frame in the DPB,
and get some message like: "No short term reference picture for xxx".
So there may be empty entries in ref_pic_list0/1 when passing to
decode_slice() function of sub class. We need to check the NULL pointer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2018>
Specify modules to look for OpenEXR when CMake is used, as we may have
CMake config files instead of pkg-config files that result from building
OpenEXR, which may be built with CMake which is typically the case on Visual
Studio builds.
In this case, Meson does seem to find the 'OpenEXR' package with CMake
after trying pkg-config, but does not consider it enough without the
'modules:' argument.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2014>
This reverts commit 3cad3455377d5a22faa138d9df840257059776c8.
That commit was breaking the association between an audio and
a video track in the standard case.
In practice, to support carrying separate MediaStream, we are
going a way to map what MediaStreamTrack belong to what MediaStream,
but that will require some thinking about the API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2023>
From https://datatracker.ietf.org/doc/html/draft-ietf-mmusic-msid-16:
> Multiple media descriptions with the same value for msid-id and
> msid-appdata are not permitted.
Our previous implementation of simply using the CNAME as the msid
identifier and the name of the transceiver as the msid appdata was
misguided and incorrect, and created issues when bundling multiple
video streams together: the ontrack event was emitted with the same
streams for the two bundled medias, at least in Firefox.
Instead, use the transceiver name as the identifier, and expose
a msid-appdata property on transceivers to allow for further
customization by the application. When the property is not set,
msid-appdata can be left empty as it is specified as optional.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2003>
WebKit is not going to render anything until a URI is set, leading to a
WPE posting a `WPE View did not render a buffer` error message. To avoid
requiring the user to know it if they only want to use
`wpesrc::load-bytes` we can just use `about:blank` as default and
everything will work as users would expect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1492>
This was not a problem here because even if we end up accidentally
linking to the wrong pad, things will work out eventually as long as
one pad-added is emitted for each pad that is added.
But it will be a huge problem if someone copies this code and changes
something that requires different handling for different sorts of
pads. The resultant code will be racy. Let's not do this, it's a bad
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2008>
Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11
input support and re-written nvcuda{h264,h265}enc elements.
Newly writeen elements have some differences compared with old
nv{h264,h265}enc including non-backward compatible changes.
* RGBA is not a supported input format any more:
New elements will support only YUV formats to avoid implicit conversion
done by hardware. Ideally it should be done by upstream element
in order to have more control on it. Moreover, RGBA support can cause
redundant RGBA -> YUV conversion if multiple encoders are
used for the same RGBA input
* Subsampled planar format support is dropped:
I420 and YV12 format are not supported formats for Direct3D11.
Although it's supported in CUDA mode, it's not a hardware friendly
memory layout and it will waste GPU memory since UV planes
will have large padding due to the memory layout requirement of NVENC.
* GL support is dropped: Similar to the RGBA case,
GL support in encoder would be suboptimal if GL input is
used by multiple encoders, because each encoder will copy GL memory
into CUDA memory.
Upstream cudaupload element can be used for GL <-> CUDA
interop instead.
* No more pre-allocation of encoder input surfaces. New implementation
will use input CUDA memory without copy (zero-copy) or
will copy into a NVENC's input buffer struct in case of
system memory input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
Dispatches a list of active touch events to the wpe view on each
received TOUCH_FRAME event. Touch inputs currently only move the cursor,
since wpe doesn't seem to support clicking/scrolling or zooming with
touch input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
