Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* configure.ac:
* gst/auparse/gstauparse.c: (gst_au_parse_reset),
(gst_au_parse_parse_header), (gst_au_parse_chain):
* gst/auparse/gstauparse.h:
Use audioconvert for converting from non-native endianness floats
in auparse instead of doing it ourself. Fixes#424527.
This needs the audioconvert from plugins-base CVS.
Original commit message from CVS:
* configure.ac:
* gst/auparse/gstauparse.c: (gst_au_parse_reset),
(gst_au_parse_parse_header), (gst_au_parse_chain):
* gst/auparse/gstauparse.h:
Revert last change as we don't want plugins-good to depend on
plugins-base CVS now.
Original commit message from CVS:
* configure.ac:
Require gst-plugins-base CVS for audioconvert with non-native
float support and width/depth fix in libgstriff.
Patch by: René Stadler <mail at renestadler dot de>
* gst/auparse/gstauparse.c: (gst_au_parse_reset),
(gst_au_parse_parse_header), (gst_au_parse_chain):
* gst/auparse/gstauparse.h:
Don't swap the floats ourself if they're not in native endianness.
Instead let audioconvert handle this. Fixes#339838.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_add_srcpad),
(gst_id3demux_sink_activate):
Don't leak caps: make gst_id3demux_add_srcpad() not take ownership of the
caps passed to it (previouslly one code path assumes it takes ownership
while another one assumes it doesn't).
* configure.ac:
* tests/files/Makefile.am:
* tests/files/id3-407349-1.tag:
* tests/files/id3-407349-2.tag:
Add directory where data for unit tests can be stored.
* tests/Makefile.am:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/id3demux.c: (pad_added_cb), (error_cb),
(read_tags_from_file), (run_check_for_file),
(check_date_1977_06_23), (GST_START_TEST), (id3demux_suite):
Add unit test for id3demux, and in particular for bug #407349. Only
testing pull-mode for now; push mode doesn't work yet because the test
files are smaller than ID3_TYPE_FIND_MIN_SIZE.
Original commit message from CVS:
* configure.ac:
Activate monoscope when building with --enable-experimental. Fix
--enable-external configure switch description.
* sys/sunaudio/gstsunaudiomixer.c: (gst_sunaudiomixer_base_init):
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_dispose):
Help gst-indent.
Original commit message from CVS:
=== release 0.10.5 ===
2006-12-21 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
releasing 0.10.5, "The Path of Thorns"
Original commit message from CVS:
* configure.ac:
Make sure libcaca can actually be used instead of just checking for
/usr/bin/caca-config, so we don't wrongly try to build cacasink when
cross-compiling (fixes#384587).
Original commit message from CVS:
* configure.ac:
libflac-1.1.3 changed API again, but we can't build against it yet,
so make sure our check doesn't use libflac-1.1.3 and add a comment
to this effect.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
add build stuff for v4l2, needs --enable-experimental until
the last bits are resolved
Original commit message from CVS:
* configure.ac:
Require CVS of GStreamer core and -base (for
GST_TAG_EXTENDED_COMMENT and gst_tag_parse_extended_comment()).
* ext/taglib/gstid3v2mux.cc:
Write extended comment tags properly (#348762).
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame):
Extract COMM frames into extended comments, which makes it
easier to properly retain the description bit of the tag
and maintain this information when re-tagging (#348762).
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* configure.ac:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Send the newsegment event in the streaming thread.
Fixes#347529
Original commit message from CVS:
2006-06-19 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
If we have libraw1394 >= 1.2.1, then we need libiec61883.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(scan_encoded_string), (parse_picture_frame):
Extract images from ID3v2 tags (APIC frames). Fixes#339704.
* configure.ac:
Require core >= 0.10.8 (for GST_TAG_IMAGE and
GST_TAG_PPEVIEW_IMAGE used in the patch above).
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis dot com>
* configure.ac:
We should use $SED and not $(SED) in configure.ac (#343678).
Original commit message from CVS:
2006-06-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
We now require libraw1394 >= 1.1.0 and that version onwards all
have .pc files.
Original commit message from CVS:
2006-05-31 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
Detect libiec61883 and set necessary CFLAGS and LIBS for dv1394.
* ext/raw1394/Makefile.am:
Add CFLAGS.
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_iec61883_receive),
New method, to receive using libiec61883.
(gst_dv1394src_iso_receive),
#ifdef'd out if libiec61883 is present.
(gst_dv1394src_bus_reset),
Get userdata correctly if using libiec61883.
(gst_dv1394src_create),
When using libiec61883, only poll one fd and no need to read.
(gst_dv1394src_discover_avc_node),
Replace g_warnings.
(gst_dv1394src_start),
Create new handle when we know which dv port. More reliable
than setting port on an existing handle. Initialise libiec61883.
(gst_dv1394src_stop):
If using libiec61883, then cleanup its handle properly.
* ext/raw1394/gstdv1394src.h:
Add libiec61883 handle.
Original commit message from CVS:
* configure.ac:
figure out where plugins-base plugins are
* tests/check/Makefile.am:
use plugins-base plugins, so we have typefind functions
* tests/check/elements/id3v2mux.c: (test_taglib_id3mux_with_tags):
increase num-buffers, this makes sure the test errors out instead
of timing out when no typefind functions are present
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* pkgconfig/.cvsignore:
* pkgconfig/Makefile.am:
* pkgconfig/gstreamer-plugins-good-uninstalled.pc.in:
add a .pc file so other modules can use good plugins in tests
Original commit message from CVS:
* configure.ac:
Don't compile udp and rtsp plugins on win32 (mingw) or other
systems that don't have <sys/socket.h> for some reason (#316203).
Original commit message from CVS:
* configure.ac:
Bump -base requirement to 0.10.5 for gst_tag_from_id3_user_tag(),
used by id3demux.
* gst/id3demux/gstid3demux.c: (plugin_init):
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_user_text_identification_frame),
(parse_unique_file_identifier):
Add support for UFID and TXXX frames and extract musicbrainz tags.
Original commit message from CVS:
* configure.ac:
Bump requirements to current core and -base CVS
(core for new typefind helper API, and -base for the
WAVFORMATEX support that was added to libgstriff and
is needed by wavparse).
* gst/apetag/Makefile.am:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain),
(gst_tag_demux_sink_activate):
Use new typefind helpers for typefinding instead of our
home-grown stuff; also, do typefinding in pull-mode if
upstream supports that.
Original commit message from CVS:
Gdkpixbuf ported from 0.8 to 0.10 by Renato Filho <renato.filho@indt.org.br>. gst_loader and gdkpixbufanimation still need port.
Original commit message from CVS:
* configure.ac:
Bump core and plugins-base requirement to 0.10.2.2
for API additions (and 1 migration of gst_bin_find_unconnected_pad)
Original commit message from CVS:
* configure.ac:
* ext/gconf/gconf.c: (gst_gconf_render_bin_from_key):
Use new functions from core to render a bin from a
string. Fixes build. Up requirements to core CVS.
Original commit message from CVS:
* configure.ac:
Use plain AS_LIBTOOL_TAGS instead of AS_LIBTOOL_TAGS([CXX]), just
like in the core and gst-plugins-base. Fixes build on Solaris (fixes
#326683; patch by: Brian Cameron <brian dot cameron at sun dot com>)
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/cdio/Makefile.am:
* ext/cdio/gstcdio.c:
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c:
* ext/cdio/gstcdiocddasrc.h:
Port libcdio cdda source, formerly known as cddasrc, now known as
cdiocddasrc (fixes#323327). Should also read CD-TEXT if available,
but that's not tested (fixes#317658).
Original commit message from CVS:
add Sun Audio plugin. Verified that nothing breaks and that make check works.
Don't think the docs gets properly built yet, but I don't understand exactly how to enable that.
Original commit message from CVS:
* configure.ac:
Update comment in OSS includes check.
* sys/oss/gstossdmabuffer.c:
* sys/oss/gstosshelper.c:
* sys/oss/gstossmixer.c:
* sys/oss/gstossmixertrack.c:
* sys/oss/gstosssink.c:
* sys/oss/gstosssrc.c:
* sys/oss/oss_probe.c:
Don't assume the OSS soundcard.h include is always in
the sys/ directory. Instead, use the existing defines
from config.h to include the right file. Fixes
compilation on OpenBSD 3.8 (#323718).
Original commit message from CVS:
* configure.ac:
fix up GST_PLUGIN_LDFLAGS
* gst/rtsp/rtspconnection.c:
fix includes (see #317043)
* gst/videofilter/Makefile.am:
stop installing this library
Original commit message from CVS:
2005-10-02 Andy Wingo <wingo@pobox.com>
* configure.ac (GST_PLUGIN_LDFLAGS): Change to be like -base.
* ext/flac/gstflacenc.c: Ported to 0.9.
* ext/flac/gstflacdec.c (gst_flacdec_loop): Handle errors better.
* ext/flac/Makefile.am: Add the GST_PLUGINS_BASE cflags and libs,
and link to gsttagedit. Enable flacenc.
* ext/flac/gstflacdec.c: Re-enable tag reading.
Original commit message from CVS:
* configure.ac:
Fix unexpanded autoconf macro GST_DOC, which has been renamed
to GST_DOCBOOK_CHECK (see common/m4/gst-doc.m4) (#316202).
Original commit message from CVS:
Andrewio Patrickoforus Wingonymus - 5 additional tests for your sins
Add a regression test for level and fix a casting bug that made the additional
channels turn out wrong
Original commit message from CVS:
2005-08-25 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstladspa.h:
* ext/ladspa/gstladspa.c: Halfway-ported. Doesn't compile yet.
* ext/ladspa/gstsignalprocessor.h:
* ext/ladspa/gstsignalprocessor.c: New files, the start of a base
class for DSP elements.
* configure.ac: Sort the external libs checks, add a ladspa check,
output the ladspa makefile.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/speex/Makefile.am:
* ext/speex/gstspeex.c: (plugin_init):
* ext/speex/gstspeexdec.c: (speex_get_query_types),
(gst_speex_dec_init), (speex_dec_src_query), (speex_dec_src_event),
(speex_dec_event), (speex_dec_chain):
Port speexdec. Leads to some unfamiliar warnings on console,
but works otherwise.
Original commit message from CVS:
2005-08-04 Andy Wingo <wingo@pobox.com>
* sys/oss/gstossaudio.c (plugin_init): Second-class citizen.
* gst/videobox/gstvideobox.c (gst_video_box_get_size): Update for
API changes.
* configure.ac (DEFAULT_AUDIOSINK, DEFAULT_VIDEOSINK): Set to
autoaudiosink and autovideosink.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/libpng/Makefile.am:
* ext/libpng/gstpng.c:
* ext/libpng/gstpngenc.c:
Ported pngenc , still have to port pngdec...
Original commit message from CVS:
* configure.ac:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
* gst/wavparse/Makefile.am:
Ported wavparse to 0.9 . Playing, seeking and state changes work.
Could need more loving on the headers though.
Original commit message from CVS:
2005-07-18 Andy Wingo <wingo@pobox.com>
* configure.ac (DEFAULT_AUDIOSINK, DEFAULT_AUDIOSRC): Use alsa by
default. Also because it's the only thing that really works. (This
is used in the GConf elements).
Use AS_LIBTOOL_TAGS. Fix crap commit re: gettext.
Original commit message from CVS:
2005-07-16 Philippe Khalaf <burger@speedy.org>
* gst/fdsrc/gstfdsrc.c:
* gst/fdsrc/gstfdsrc.h:
* gst/fdsrc/Makefile.am:
Moved fdsrc 0.9 port from gstreamer/gst/elements to here.
Original commit message from CVS:
2005-07-08 Andy Wingo <wingo@pobox.com>
* gst/avi/Makefile.am (libgstavi_la_CFLAGS): No gettext hacks, the
defines come from config.h.
* autogen.sh: Run autopoint, etc.
* Makefile.am (DIST_SUBDIRS, SUBDIRS): Go into po/.
* configure.ac: Add gettext stuff.
Original commit message from CVS:
2005-07-05 Andy Wingo <wingo@pobox.com>
* gst/videobox/gstvideobox.c: Clean up, port to 0.9, use
BaseTransform.
* gst/videobox/Makefile.am: Link to base libs, include
plugins-base cflags, dist the README.
* configure.ac (GST_PLUGIN_ALL, AC_CONFIG_FILES): Add videobox to
the build.
Original commit message from CVS:
2005-07-04 Andy Wingo <wingo@pobox.com>
* examples/level/:
* examples/level/Makefile.am:
* examples/level/README:
* examples/level/demo.c:
* examples/level/plot.c: Examples moved out of the source dir. Not
updated tho.
* configure.ac: Add level to the build.
* gst/level/Makefile.am:
* gst/level/gstlevel.h:
* gst/level/gstlevel.c: Cleaned up, ported to 0.9.
Original commit message from CVS:
2005-07-01 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
* ext/mad/Makefile.am:
* sys/oss/Makefile.am:
Roll gstreamer-interfaces-0.9.pc into gstreamer-plugins-base-0.9.pc
Original commit message from CVS:
Fixed a few things to enable the mad and effectv to be able to find the headers in the gst-plugins-base/gst-libs and to link against the libs in there.
Original commit message from CVS:
Since dirac 0.5.0 the framerate in dirac is expressed as a rational number. Fix build and up requirement to 0.5.0, and also pass parameters to gst_diracdec_link in the right order. (fixes#167959)
Original commit message from CVS:
* configure.ac: Pull in librfb from my CVS tree, because it is
too small and annoying to be separate. Move rfbsrc plugin
to gst/.
* ext/Makefile.am:
* ext/librfb/Makefile.am:
* ext/librfb/gstrfbsrc.c:
* gst/librfb/Makefile.am:
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfb.c:
* gst/librfb/rfb.h:
* gst/librfb/rfbbuffer.c:
* gst/librfb/rfbbuffer.h:
* gst/librfb/rfbbytestream.c:
* gst/librfb/rfbbytestream.h:
* gst/librfb/rfbcontext.h:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
* gst/librfb/rfbutil.h:
Original commit message from CVS:
* configure.ac:
* ext/flac/gstflacenc.c: (gst_flacenc_init),
(gst_flacenc_seek_callback), (gst_flacenc_write_callback),
(gst_flacenc_tell_callback), (gst_flacenc_chain),
(gst_flacenc_change_state):
* ext/flac/gstflacenc.h:
Update for API change in flac-1.1.1. Update requirement in
configure.ac. Fixes#162974.
Original commit message from CVS:
* configure.ac:
* gst/games/Makefile.am:
* gst/games/gstpuzzle.c:
add a puzzle game with...
* gst/games/gstvideoimage.c:
* gst/games/gstvideoimage.h:
... full colorspace support (that includes YUV9 and RGB16)) stolen
from videotestsrc and made into something that would be a nice
library for a lot of other plugins.
Original commit message from CVS:
* configure.ac:
don't compile faad plugin if a RC of 2.0 is found
* gst/asfdemux/gstasfdemux.c:
(gst_asf_demux_process_ext_content_desc):
try to make Solaris compiler happier
Original commit message from CVS:
* configure.ac:
Fix indentation, fix v4l2 plugin detection.
* ext/Makefile.am:
Fix libmms location (Maciej, use diff -u!).
* ext/alsa/gstalsa.c: (gst_alsa_init):
Initialize caps cache to NULL.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Only change state on audiosink if it exists.
Original commit message from CVS:
* configure.ac:
* ext/speex/gstspeexdec.h:
* ext/speex/gstspeexenc.h:
Fixes#158382. Make speex plugin compatible with both 1.0 and 1.1.
Fix detection code in configure.ac
Original commit message from CVS:
* configure.ac: look for musepack headers as musepack/*.h
(fixes#159847)
* ext/musepack/gstmusepackdec.h: use <musepack/*.h>
* ext/musepack/gstmusepackreader.h: same
Original commit message from CVS:
* configure.ac: add audioresample and cairo plugins. Remove
HAVE_MMX stuff, because it's not used.
* ext/Makefile.am: same
* ext/audioresample/Makefile.am: You are not ready for an
audio resampling element based on audioresample.
* ext/audioresample/gstaudioresample.c:
* ext/audioresample/gstaudioresample.h:
* ext/cairo/Makefile.am: You are not ready for overlay elements
based on cairo. Don't look too closely, these elements kinda
suck right now.
* ext/cairo/gstcairo.c: new
* ext/cairo/gsttextoverlay.c: new
* ext/cairo/gsttextoverlay.h: new
* ext/cairo/gsttimeoverlay.c: new
* ext/cairo/gsttimeoverlay.h: new
* gst-libs/gst/media-info/media-info-priv.h: fix compile
problem with compilers that don't support variadic macros.
Original commit message from CVS:
* configure.ac: Applied patch from bug #143659, making default
sources and sinks OS-dependent (for Solaris), and added code
for OS/X.
* gconf/gstreamer.schemas.in: use OS-dependent sinks in gconf.
Original commit message from CVS:
2004-12-09 Thomas Vander Stichele <thomas at apestaart dot org>
* configure.ac: move GCONF macro outside conditional for the am
conditional. Fixes#160439
Original commit message from CVS:
* configure.ac:
* ext/libvisual/visual.c: (gst_visual_get_type),
(libvisual_log_handler), (gst_visual_getcaps),
(gst_visual_srclink), (gst_visual_change_state), (make_valid_name),
(plugin_init):
Update libvisual to 0.1.7. Link in the debug handling to gstreamer
* ext/smoothwave/Makefile.am:
* ext/smoothwave/demo-osssrc.c: (main):
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_class_init),
(gst_smoothwave_init), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain), (gst_sw_change_state),
(plugin_init):
* ext/smoothwave/gstsmoothwave.h:
Make gstsmoothwave a working element in the 20th century.
* gst/chart/gstchart.c: (gst_chart_init), (gst_chart_srcconnect):
Fix incorrect link function
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audiofilter_link):
fix link function to always query channels and query width for
floats
* configure.ac:
add equalizer dir
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_get_type),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_init), (gst_iir_equalizer_finalize),
(arg_to_scale), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace), (gst_iir_equalizer_setup),
(plugin_init):
add an equalizer
Original commit message from CVS:
* configure.ac: update for swfdec-0.3 and liboil-0.2
* ext/swfdec/gstswfdec.c: update for swfdec-0.3
* ext/swfdec/gstswfdec.h: same
* gst/videofilter/gstvideobalance.c: update for liboil-0.2
* gst/videotestsrc/videotestsrc.c: same
Original commit message from CVS:
- say explicitly in the ./configure output that we're looking for libsidplay 1.36.x
(as siddec won't compile against 2.x.x)
Original commit message from CVS:
* configure.ac: remove NASM check, since we don't use it. Update
dirac check to 0.4
* ext/dirac/gstdiracdec.cc: update to current 0.4 API
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_link):
Initialized variables.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_change_state),
(gst_qtdemux_loop_header), (qtdemux_parse), (qtdemux_parse_trak),
(gst_qtdemux_handle_esds), (qtdemux_audio_caps): Fix seeking, add
SVQ3 format
Original commit message from CVS:
* Trying to correct the GST_CHECK_CONFIGPROG macro. It works perfectly for
I hope i dont break anything.
* Shifting the MAS plugin back from gst-rotten.
Original commit message from CVS:
2004-08-19 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
* ext/lame/Makefile.am:
* ext/lame/gstlame.c: (gst_lame_class_init),
(gst_lame_set_property), (gst_lame_get_property), (gst_lame_setup):
Only enable lame presets if version of lame has presets in API
Original commit message from CVS:
Patch from Gernot Ziegler <gz@lysator.liu.se> rewriting the
GL sink plugin. (Bug #147302)
* configure.ac: Test for OpenGL
* sys/Makefile.am: Use test for OpenGL
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c: rewrite
* sys/glsink/glimagesink.h: rewrite
Original commit message from CVS:
2004-06-22 Zaheer Abbas Merali <zaheerabbas at merali.org>
* configure.ac:
Add objective-c support if running in Darwin/Mac OS X
* sys/Makefile.am:
* sys/osxvideo:
* sys/osxvideo/Makefile.am:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
Add osxvideosink, a cocoa-based osx video sink
Original commit message from CVS:
2004-06-12 Zaheer Abbas Merali <zaheerabbas@merali.org>
* configure.ac:
Added ogg library so that OSX detects libtheora properly
Original commit message from CVS:
* configure.ac: OSS portability
* ext/arts/gst_arts.c: idem
* sys/oss/gstosselement.c: idem
* sys/oss/gstossmixer.c: idem
* sys/oss/gstosssink.c: idem
* sys/oss/gstosssrc.c: idem
* sys/oss/oss_probe.c: idem
- check for soundcard.h in different places for some BSD
Original commit message from CVS:
* AUTHORS:
Add me to the authors file
* configure.ac:
Increase the libdv requirement to >= version 0.100
* ext/dv/gstdvdec.c: (gst_dvdec_init), (gst_dvdec_src_convert),
(gst_dvdec_src_query), (gst_dvdec_handle_sink_event),
(gst_dvdec_push), (gst_dvdec_loop), (gst_dvdec_change_state):
* ext/dv/gstdvdec.h:
Add support for the new_media flag when sending DISCONT events
Make the querying work when video pad is not linked
Original commit message from CVS:
- reenable speex plugins for speex 1.1.5 (API/ABI compatible with 1.0.x)
- fix a cast warning that prevent compilation of speexenc
Original commit message from CVS:
* configure.ac: Minor cosmetic change to convince the buildbot to
reautogen.
* sys/sunaudio/gstsunaudio.c: (gst_sunaudiosink_class_init),
(gst_sunaudiosink_init), (gst_sunaudiosink_getcaps),
(gst_sunaudiosink_pad_link), (gst_sunaudiosink_chain),
(gst_sunaudiosink_setparams), (gst_sunaudiosink_open),
(gst_sunaudiosink_close), (gst_sunaudiosink_change_state),
(gst_sunaudiosink_set_property), (gst_sunaudiosink_get_property):
More hacking. Plays audio now.
Original commit message from CVS:
- change sunaudio category to Sink/Audio
- change HAVE_FIONREAD macro to GST_CHECK_FIONREAD
- add conditional include for FIONREAD ioctl on more files
Original commit message from CVS:
* configure.ac:
remove -DG_DISABLE_DEPRECATED. It's not usable without workarounds
if you want to work against glib 2.2 and 2.4
Original commit message from CVS:
* configure.ac: Add sunaudio
* examples/Makefile.am: make gstplay depend on gconf
* gst/ffmpegcolorspace/gstffmpegcodecmap.c: Remove c99-isms
* gst/ffmpegcolorspace/imgconvert.c: (build_rgb_palette),
(convert_table_lookup), (img_convert): remove c99-isms
* gst/ffmpegcolorspace/imgconvert_template.h: make a constant
unsigned, to fix a warning on Solaris
* gst/mpeg1sys/systems.c: bcopy->memcpy
* gst/rtjpeg/RTjpeg.c: (RTjpeg_yuvrgb8): bcopy->memcpy
* sys/Makefile.am: Add sunaudio
Original commit message from CVS:
* autogen.sh:
* configure.ac:
* ext/mad/gstid3tag.c: (gst_id3_tag_chain):
compute offsets correctly for internal buffers so timestamps are set
correctly when we can't seek. Also handle cases where there are no
offsets. (based on a patch by David Moore, fixes#142507)
Original commit message from CVS:
* configure.ac:
enable shout2 by default
* ext/shout2/gstshout2.c: (gst_shout2send_protocol_get_type),
(gst_shout2send_base_init), (gst_shout2send_init),
(gst_shout2send_connect), (gst_shout2send_change_state):
* ext/shout2/gstshout2.h:
make this work again. Based on a patch by Zaheer Merali (fixes
#142262)
* ext/theora/theora.c: (plugin_init):
don't set rank on encoders
Original commit message from CVS:
* configure.ac:
check for kdemacros.h, too (should fix#141821)
* ext/vorbis/vorbisdec.c: (vorbis_dec_event), (vorbis_dec_chain):
don't crash if no header was sent, but nicely error out (fixes part
of #141554)
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/libvisual/Makefile.am:
* ext/libvisual/visual.c:
add initial support for libvisual (http://libvisual.sourceforge.net)
libvisual is still quite alpha, so expect crashes in there :)
Original commit message from CVS:
* configure.ac:
* sys/v4l2/gstv4l2element.h:
Workaround for missing struct v4l2_buffer declaration in Suse 9
and Mandrake 10 linux/videodev2.h header file (#135919).
Original commit message from CVS:
Try a bit harder to get the correct Qt dir. At some point I'll split this
out into a real check for Qt, but for now I just want the KIO plugin to
actually build.
Original commit message from CVS:
* configure.ac:
* gst-libs/gst/gconf/Makefile.am:
* pkgconfig/Makefile.am:
move gstreamer-gconf pkgconfig files to pkgconfig/ dir. Make sure
they get rebuilt properly
* configure.ac:
when checking for vorbis, try pkgconfig first.
* gst/modplug/gstmodplug.cc:
add fixate function
Original commit message from CVS:
* configure.ac: the Hermes library controls hermescolorspace, not
colorspace.
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_init): minor pet peeve: disable code with #ifdef,
not /* */
* ext/sdl/sdlvideosink.c: Change XID to unsigned long.
* ext/sdl/sdlvideosink.h: ditto.
* gst/colorspace/gstcolorspace.c: Fix old comments about Hermes
Original commit message from CVS:
2004-02-20 Andy Wingo <wingo@pobox.com>
* gst/intfloat/, gst/oneton: Removed, replaced by audioconvert and
interleave respectively.
* gst/interleave/deinterleave.c: New plugin: deinterleave
(replaces on oneton).
* gst/interleave/interleave.c: New plugin: interleave.
* gst/interleave/plugin.h: Support file.
* gst/interleave/plugin.c: Support file.
* configure.ac: Remove intfloat and oneton, add interleave.
* ext/sndfile/gstsf.c: Handle events better.
* gst/audioconvert/gstaudioconvert.c: Change to support int2float
and float2int operation. int2float has scheduling problems as
noted in in2float_chain.
Original commit message from CVS:
2004-02-20 Benjamin Otte <otte@gnome.org>
* ext/xine/Makefile.am:
* ext/xine/gstxine.h:
* ext/xine/xine.c:
* ext/xine/xineaudiodec.c:
* ext/xine/xinecaps.c:
add first version of xine plugin wrapper. Currently only wraps the
QDM2 win32 DLL, and even that only in proof-of-concept quality.
* configure.ac:
* ext/Makefile.am:
add xine plugin wrapper, disabled by default. Use --enable-xine to
build. Note that it'll segfault on gst-register if you don't remove
the goom and tvtime post plugins from xine.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(qtdemux_parse), (qtdemux_parse_trak), (qtdemux_audio_caps):
add extradata parsing for QDM2.
change around debugging prints.
Original commit message from CVS:
Convert a few inner loops to use liboil. This is currently
optional, and is only enabled if liboil is present (duh!).
* configure.ac: Check for liboil-0.1
* gst/intfloat/Makefile.am:
* gst/intfloat/gstint2float.c: (conv_f32_s16), (scalarmult_f32),
(gst_int2float_chain_gint16):
* gst/videofilter/Makefile.am:
* gst/videofilter/gstvideobalance.c: (gst_videobalance_class_init),
(tablelookup_u8), (gst_videobalance_planar411):
* gst/videotestsrc/Makefile.am:
* gst/videotestsrc/gstvideotestsrc.c: (plugin_init):
* gst/videotestsrc/videotestsrc.c: (splat_u8), (paint_hline_YUY2),
(paint_hline_IYU2), (paint_hline_str4), (paint_hline_str3),
(paint_hline_RGB565), (paint_hline_xRGB1555):
Original commit message from CVS:
2004-02-03 Benjamin Otte <in7y118@public.uni-hamburg.de>
* common/m4/ax_create_stdint_h.m4:
* configure.ac:
add AX_CREATE_STDINT_H to get correct type definitions for a52dec in
_stdint.h.
* Makefile.am:
remove generated _stdint.h in DISTCLEANFILES
* ext/a52dec/gsta52dec.c:
include _stdint.h for a52dec. (should fix#133064)
Original commit message from CVS:
2004-01-30 Benjamin Otte <in7y118@public.uni-hamburg.de>
* configure.ac:
use AC_C_INLINE
* configure.ac:
* ext/Makefile.am:
* ext/theora/Makefile.am:
* ext/theora/theoradec.c:
add theora video decoder. Does just do simple decoding for now and
has been tested against Theora cvs only.
* ext/vorbis/vorbisdec.c: (vorbis_dec_event):
always reset packetno on DISCONT
Original commit message from CVS:
* configure.ac:
* gst/colorspace/Makefile.am:
* gst/colorspace/gstcolorspace.c:
* gst/colorspace/gstcolorspace.h:
* gst/colorspace/yuv2rgb.c:
* gst/colorspace/yuv2rgb.h:
Duplicate the ext/hermes colorspace plugin, and remove Hermes
code and GPL code. Fix for new caps negotiation. Rewrite
much of the format handling code, and some of the conversion
code. Basically, rewrote almost everything. This element
handles I420, YV12 to RGB conversions.
* ext/hermes/Makefile.am:
* ext/hermes/gsthermescolorspace.c:
Rename colorspace to hermescolorspace. Fix negotiation issues.
Remove non-Hermes related code. This element handles lots of
RGB to RGB conversions, but no YUV.
* ext/hermes/gstcolorspace.c:
* ext/hermes/gstcolorspace.h:
* ext/hermes/rgb2yuv.c:
* ext/hermes/yuv2rgb.c:
* ext/hermes/yuv2rgb.h:
* ext/hermes/yuv2rgb_mmx16.s:
* ext/hermes/yuv2yuv.c:
* ext/hermes/yuv2yuv.h:
Remove old code.
Original commit message from CVS:
2004-01-01 Ronald Bultje <rbultje@ronald.bitfreak.net>
* configure.ac:
Fix configure check for mpeg2enc. We need 1.6.1.93 instead of
1.6.1.92, since the pkg-config file of 1.6.1.92 is borked and
it therefore uses the wrong include paths. Too bad... Note
that 1.6.1.93 is not release yet. ;).
Also add a check for mplex, which is now using the lib'ified
mplex from mjpegtools, too.
* ext/ffmpeg/gstffmpegcodecmap.c:
Add codec_tag for 3ivx/xvid. For xvid, this should fix playback
issues. I don't think ffmpeg handles 3ivx correctly, so this
probably won't work. But it won't hurt either.
* ext/ffmpeg/gstffmpegdec.c: (gst_ffmpegdec_connect),
(gst_ffmpegdec_chain):
* ext/ffmpeg/gstffmpegenc.c: (gst_ffmpegenc_connect),
(gst_ffmpegenc_chain_audio):
Fix memleak in audio encoding. Close codec if open fails, this
calls the cleanup routines so we can re-use the context.
* ext/mpeg2enc/gstmpeg2enc.cc:
Fix pad template names/types, fix memory issue with getcaps().
* ext/mpeg2enc/gstmpeg2encoder.cc:
* ext/mpeg2enc/gstmpeg2encoder.hh:
Fix compile issue with new caps system (const thingy).
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.hh:
We read a first frame right on initing, so that we have a caps
when we init the output. This caps is cached in padprivate and
read as first frame.
* ext/mplex/Makefile.am:
* ext/mplex/gstmplex.cc:
* ext/mplex/gstmplex.h:
* ext/mplex/gstmplex.hh:
* ext/mplex/gstmplexibitstream.cc:
* ext/mplex/gstmplexibitstream.hh:
* ext/mplex/gstmplexjob.cc:
* ext/mplex/gstmplexjob.hh:
* ext/mplex/gstmplexoutputstream.cc:
* ext/mplex/gstmplexoutputstream.hh:
We wrap mjpegtools mplex. So I rewrote the plugin. The old plugin
had issues, didn't do capsnego, supported only a subset of the
mplex features and required a mplex fork in our local CVS. Plus
that it worked agaist a very old mplex version. Rewriting was
faster than updating it.
* gst-libs/ext/Makefile.am:
* gst-libs/ext/mplex/INSTRUCT:
* gst-libs/ext/mplex/Makefile.am:
* gst-libs/ext/mplex/README:
* gst-libs/ext/mplex/TODO:
* gst-libs/ext/mplex/ac3strm_in.cc:
* gst-libs/ext/mplex/audiostrm.hh:
* gst-libs/ext/mplex/audiostrm_out.cc:
* gst-libs/ext/mplex/aunit.hh:
* gst-libs/ext/mplex/bits.cc:
* gst-libs/ext/mplex/bits.hh:
* gst-libs/ext/mplex/buffer.cc:
* gst-libs/ext/mplex/buffer.hh:
* gst-libs/ext/mplex/fastintfns.h:
* gst-libs/ext/mplex/format_codes.h:
* gst-libs/ext/mplex/inputstrm.cc:
* gst-libs/ext/mplex/inputstrm.hh:
* gst-libs/ext/mplex/lpcmstrm_in.cc:
* gst-libs/ext/mplex/mjpeg_logging.cc:
* gst-libs/ext/mplex/mjpeg_logging.h:
* gst-libs/ext/mplex/mjpeg_types.h:
* gst-libs/ext/mplex/mpastrm_in.cc:
* gst-libs/ext/mplex/mpegconsts.cc:
* gst-libs/ext/mplex/mpegconsts.h:
* gst-libs/ext/mplex/mplexconsts.hh:
* gst-libs/ext/mplex/multplex.cc:
* gst-libs/ext/mplex/outputstream.hh:
* gst-libs/ext/mplex/padstrm.cc:
* gst-libs/ext/mplex/padstrm.hh:
* gst-libs/ext/mplex/stillsstream.cc:
* gst-libs/ext/mplex/stillsstream.hh:
* gst-libs/ext/mplex/systems.cc:
* gst-libs/ext/mplex/systems.hh:
* gst-libs/ext/mplex/vector.cc:
* gst-libs/ext/mplex/vector.hh:
* gst-libs/ext/mplex/videostrm.hh:
* gst-libs/ext/mplex/videostrm_in.cc:
* gst-libs/ext/mplex/videostrm_out.cc:
* gst-libs/ext/mplex/yuv4mpeg.cc:
* gst-libs/ext/mplex/yuv4mpeg.h:
* gst-libs/ext/mplex/yuv4mpeg_intern.h:
* gst-libs/ext/mplex/yuv4mpeg_ratio.cc:
We don't fork mjpegtools' mplex in our CVS anymore.
* gst/avi/gstavidemux.c: (gst_avi_demux_src_getcaps),
(gst_avi_demux_add_stream):
* gst/avi/gstavidemux.h:
Add getcaps() function for proper caps nego. This makes some
parts of AVI playback/reading work.
* sys/ximage/ximagesink.c: (gst_ximagesink_sinkconnect):
Resize window on new capsnego. This is probably wrong, but
I'm still committing it because with current capsnego, the
first successfull capsnego is auto-fixated, therefore rounded
down to the lowest values in the caps. this results in a 16x16
XWindow that is not reized when real capsnego finishes.
Dave, I see more cases of this, do you know a proper solution?
* tools/gst-launch-ext.in:
Fix MPEG-4 AAC (Apple iPod/iTunes) file commandline.
Original commit message from CVS:
* configure.ac: X_DISPLAY_MISSING is set to 1 if AC_PATH_XTRA fails to
find X development files. I don't understand the previous tests and
they fail on my debian/ppc unstable. This one works.
* examples/gstplay/player.c: (main): Set the pipeline to READY before
exiting.
* gst-libs/gst/play/gstplay.c: (gst_play_get_length_callback),
(gst_play_set_video_sink), (gst_play_set_audio_sink),
(gst_play_set_visualization): Add some safety checks in set_ methods
and state_change. This was throwing some ugly CRITICAL messages when
pipeline was getting disposed and casts were failing.
Original commit message from CVS:
2003-12-21 Ronald Bultje <rbultje@ronald.bitfreak.net>
* configure.ac:
Improve mpeg2enc detection. This is for distributions that do
ship mjpegtools, but without mpeg2enc. Also does object check
for might there ever be ABI incompatibility.
* ext/mpeg2enc/gstmpeg2enc.cc:
Add Andrew as second maintainer (he's helping me), and also add
an error if no caps was set. This happens if I pull before capsnego
and that's something I should solve sometime else.
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup):
Fix time parsing.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_audio_pad_link),
(gst_matroska_mux_track_header):
Add caps to templates.
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_sink_factory):
Add mpegversion=1 to prevent confusion with MPEG/AAC.
* gst/mpegstream/gstmpegdemux.c:
Remove layer since it causes warnings about unfixed caps.
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_get):
Fix obvious typo (we error out if caps were set, we should of
course error out if *no* caps were set).
* sys/oss/gstosselement.c: (gst_osselement_convert):
Fix format conversion, we confused bits/bytes.
* sys/oss/gstosselement.h:
Improve documentation for 'bps'.
* sys/v4l/TODO:
Remove stuff about plugins that need removing - this was done
ages ago.
* sys/v4l/gstv4lmjpegsrc.c: (gst_v4lmjpegsrc_init),
(gst_v4lmjpegsrc_src_convert), (gst_v4lmjpegsrc_src_query):
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_init), (gst_v4lsrc_src_convert),
(gst_v4lsrc_src_query):
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_init),
(gst_v4l2src_src_convert), (gst_v4l2src_src_query):
Add get_query_types(), get_formats() and query() functions.
Original commit message from CVS:
This is a first attempt at a wrapper for the lib'ified mpeg2enc of
mjpegtools. Currently, there's a few release candidates for mjpegtools-1.6.2
available, but no stable version yet.
I've made 4 small subclasses to wrap input, output, options and generic
encoding model. The last .cc file is the GStreamer plugin element.
Note that it doesn't actually work yet, I'm doing something wrong with
header parsing and Andrew asked me to commit so he could help debugging
that. Apart from that, we should soon be able to make top-quality MPEG
encodes! :).
mpeg2enc licensing is tricky, btw, I don't even want to start discussing
that...
Original commit message from CVS:
Adding a new plugin: switch.
It takes N input and only has 1 output. You can "switch" the forwarded input through properties ("nb_sources", "active_source") and i will probably add tuner interface support soon.
It should be able to handle any kind of data passing through it.
It is still a work in progress don't consider it usable for production yet.
Original commit message from CVS:
Fix v4l detection (it requires X, but X is detected after v4l, so this needed to be swapped). Also add X requirement to v4l2
Original commit message from CVS:
tagging stuff and build fixes. In detail:
- make gdk-pixbuf loader work when distchecking
- fix invalid syntax in ffmpeg Makefile. wildcards for EXTRA_DIST are not allowed. This broke builds where distdir != srcdir
- fix ffmpeg cvs grabbing when srcdir != distdir
- new id3tag plugin for id3 tag reading/writing (uses mad's libid3tag)
- mad and libid3tag require mad/libid3tag v0.15. Fixed configure to require that
- added ogg demuxer in ext/ogg. The demuxer does not handle events yet. Especially getting seeking right will require some effort or code copying from libvorbis.
- added raw vorbis detection to typefinding. oggdemux requires a typefind function to detect its contents.
- tags plugin in gst/tags. Provides API in <gst/tags/gsttagediting.h>. API includes tag matching GStreamer <=> ID3 and GStreamer <=> vorbis and writing/reading vorbiscomments or ID3v1 tags. Also included is a simple vorbiscomment reader/writer. Writing will not really work though until someone writes oggmux.
- various build fixes. Mostly missing (DIST)CLEANFILES.
- vorbisenc handles tag writing.
Now it's YOUR turn to fix and write more plugins that handle writing/reading of tags. :)
Original commit message from CVS:
set default errorlevel to NONE. Make configure change it to ERROR (the current value) when running cvs builds. This should make releases not output any debugging information at all
Original commit message from CVS:
add initial version of gdkpixbuf loader for gtk that is capable of loading AVI and mpeg videos as GdkPixbufAnimation. I'm not sure if such a thing would be useful or too much trouble, so I'll throw it at enough testers to figure it out ;) We might want to disable it by defualt though in the future. (Currently there is not even a configure switch implemented to disable it.)
This includes a fix to not use GError in gstgdkpixbuf's typefind function and to only return GST_TYPE_FIND_MINIMUM when doing typefinding via gdk as this breaks quite a bit with the GStreamer loader installed.
Original commit message from CVS:
first bunch of conversions to new plugin_init. Includes libs/gst, gst/id3, sys/oss, ext/gnomevfs, gst/typefind and ext/mad.
You guessed it, everything Rhythmbox needs ;)
fixed BMP typefind and made gnomevfs one plugin instead of two while doing this
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
Some interface implementations for video4linux/video4linux2 plugins:
* a Tuner interface, with which one can select inputs and stations. Audio
work is underway here, but unfinished.
* A Xoverlay interface with which one can do simple overlay. Similar to
the API of the v4l/Xv XFree86 extension. Widget implementation for
GTK-2.0 coming up in the sandbox.
* Colorbalance - for adapting colors (brightness, contrast, etc.) - pretty
basic and maybe somewhat overdesigned. But it'll do for now.
Apart from these interfaces, there's also a loadable library 'xwindowlistener'
that listenes to X for the movement of a window and the overlap of other
windows. This is partly copied from xawtv (and thus partly GPL :(), but it's
needed for the xoverlay interface implementation in the v4l/v4l2 elements.
Lastly, some small changes to remove redundant properties from the v4l/v4l2
elements since these can be done much simpler. Comments appreciated!
Original commit message from CVS:
New typefind system:
* bytestream is now part of the core
* all plugins have been modified to use this new typefind system
* asf typefinding added
* mpeg video stream typefiding removed because it's broken
* duplicate typefind entries removed
* extra id3 typefinding added, because we've seen 4 types of files
(riff/wav, flac, vorbis, mp3) with id3 headers and each of these needs
to work. Instead, I've added an id3 element and let it redo typefiding
after the id3 header. this needs a hack because spider only typefinds
once. We can remove this hack once spider supports multiple typefinds.
* with all this, mp3 typefinding is semi-rewritten
* id3 typefinding in flac/vorbis is removed, it's no longer needed
* fixed spider and gst-typefind to use this, too.
* Other general cleanups
Original commit message from CVS:
Add new element: frame dropper. This element inserts/drops frames to go from a certain input framerate to a certain output framerate. It's extremely simple and that's why it's so cute.
Original commit message from CVS:
Now set XVIDEO_LIBS only if the Xv library is found. Fixed matroska check
so that it doesn't stop the configure if it fails.
Original commit message from CVS:
A big rewrite of the spec file and some ffmpeg disting fixes. The ffmpeg plugin still doesn't build for me, but I think I am getting close :)
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
Plugins cleanup:
* stereo2mono, mono2stereo, int2float, float2int: replaced by audioconvert.
* stereosplit replaced by oneton.
* vumeter replaced by level (and was broken anyway).
* avifile replaced by ffmpeg.
* mjpegtools duplicates functionality of jpeg. jpeg now works with jpeg-mmx,
too, which makes mjpegtools unneeded.
* allow for jpegmmx instead of jpeg.
* openquicktime replaced by qtdemux and ffmpeg. Broken anyway.
* XMMS is broken and will never be fixed.
* vga is broken and will not be fixed anywhere soon.
* videosink has never worked. If it works, add it back to replace xvideosink.
Original commit message from CVS:
* caps refcounting fixes for float2int
* fixed wrt setting of caps on int pad with dynamic number of sink pads in float2int
* added libsndfile plugin (currently only the src is implemented) - currently only float output, noninterleaved is implemented
Original commit message from CVS:
Corrected the configure.ac so it actually works. Updated some c files
so that they build on Solaris. This mostly involved supporting ISO
style variable-argument macros.
Original commit message from CVS:
Updated autogen.sh/configure.ac and various Makefiles to make the
configure script set up all gcc specific compiler arguments, rather
than hardcoding them in the Makefile.am files
Original commit message from CVS:
Adds divx/xvid encoders.
* divx encoder is based on divx4linux (commercial, closed-source)
* xvid encoder is based on xvidcore (http://www.xvid.org/, GPL - Christian? ;) )
Both use a GstCaps that doesn't conform with what we currently use, I might fix that later on or so. For now, it doesn't matter, it's just a test. We're also missing corresponding decoders (ffmpeg can decoded this too, but that's not the point), these might come later too.
Original commit message from CVS:
Added initial version of audioconvert, a generic converter of integer audio/raw formats.
It currently supports conversion of
- channels (mono/stereo only, until someone tells me how to mix other channels)
- endianness (little/bi endian)
- signedness
- width (8, 1, 24 and 32 bits)
- depth (1 - width bits)
missing:
- enough testing (I intend to write a testsuite for this, but that's pending)
- samplerate conversion
- other goodies like format conversion etc
Expect bugs when using it.
problems this should solve:
- encoding wav files on big endian machines
- goom working with mono audio files in gst-player
- Iain's soundcard (that one is a problem in itself)
- complaints about missing conversion
- too many age old, nearly unmaintained plugins (stereo2mono etc.)
Have fun.
Original commit message from CVS:
Port some changes from 0.6.0/0.6.1 back to HEAD (.pc files moved to pkg-config/, .m4 file moved from plugins to core)
Original commit message from CVS:
add FreeBSD patches from Andrew Turner and add missing ivorbis m4 to cvs, also disable ivorbis plugin as the test mistakes ordinary vorbis for tremor
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
Original commit message from CVS:
drop mpeg2dec 0.2.1 support in favor of 0.3.0.
keeping old code around in cvs for a while just in case someone needs it.
Original commit message from CVS:
add last part of shout2 plugin patch, but it do not get built even with --enable -experimental, will try and investigate
Original commit message from CVS:
Added *BSD (and Darwin) ioctl cdaudio playing. Couple bugfixes. 'end-track','current-track' and 'cddb-discid' properties and 'track-change' signal for the element.
