To achieve maximum throughput, waiting on command commit thread
is not ideal. And render-delay will introduce unwanted latency.
Best is to split thread and wait finished decoding job in a dedicated
output thread
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
Meson devenv already overrides GST_PLUGIN_PATH and
GST_PLUGIN_SYSTEM_PATH so only built plugins can be found. That means
unit tests are allowed to use every plugins.
This makes easier to run some unit tests under devenv instead of through
"meson test".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5748>
When creating a new VA pool set config size to zero because it's not used.
Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
When creating a new VA pool set config size to zero because it's not used.
Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
When creating a new VA pool set config size to zero because it's not used.
Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
VA drivers allocate surfaces given their properties, so there's no need to
provide a buffer size to the VA pool.
Though, the buffer size is provided by the driver, or the canonical size
is used for single planed surfaces.
This patch removes the need to provide a size for the function
gst_va_pool_new_with_config() and adds a helper method to retrieve the surface
size, gst_va_pool_get_buffer_size(). Also change the callers accordingly.
Changes for custom VA pool creation will be addressed in the following commits.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
It is racy and may cause us to accidentally keep forwarding data past
the EOS. The only reason to stop dropping would be when we encounter a
stream-start, segment, or segment-done event, either in push_one
(already queued) or in the sink pad's event function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5766>
Use gst_data_queue_push_force() for most events so they
are immediately enqueued. Only gap events and actual buffer
data will now block when the queue is full.
This fixes a problem with non-flushing seek handling
where events following a segment-done event would block
if they precede the SEGMENT event, since only SEGMENT
events would clear the 'eos' state of the multiqueue
queue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5801>
Test included.
The problem appears when aggregator drops the query while
it's being proccessed by the klass->sink_query handler.
This can happen on FLUSH_START event. If the query is still
in the queue, it can be safely dropped, but if it's already
in the klass->sink_query() handler, then sink pad has no
choice and has to wait for the proccessing to complete.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5765>
If the ladspa plugin is enabled explicitly or via auto-features, the
liblrdf dependency can not be disabled.
As the RDF parsing currently provides hardly any features, the possibility
to disable it fairly useful.
Fixes: #3168
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5794>
With the way the runtime checks are currently set up, every single
openh264 release, no matter how minor, is considered an ABI break and
requires gst-plugins-bad recompilation. This is unnecessarily strict
because it doesn't allow downstream distributions to ship any openh264
bug fix version updates without breaking gstreamer's openh264 support.
Years ago, at the time when gstreamer's openh264 support was merged,
openh264 releases were done without a versioned soname (the library was
just libopenh264.so, unversioned). Since then, starting with version
1.3.0, openh264 has started using versioned sonames and the intent has
been to bump the soname every time there's a new release with an ABI
change.
This patch drops the strict version check. meson.build already has a
minimum requirement on openh264 version 1.3.0 where soname versioning
was added, which should be good enough to ensure that the library is
using soname versioning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5780>
Apparently external-oes is not supported by the plugin as texture target,
while DMABuf uploading prefers it because it's zero copy.
This patch enables DMABuf uploading and rendering by using either 2D or
rectangle texture targets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5795>
This simplifies the way it picks the closest caps to preference and take into
consideration the framerate to avoid picking high resolution at 5fps or so.
Simply calculate a "distance" of caps A and B from the preference and put
closest first, sorting by framerate first.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5777>
This avoid a build failure when compiling against OpenSSL 3.2.0. The
problem is when windows.h is included before WinSock2.h. Because
windows.h includes winsock.h[1]. Defining _WINSOCKAPI_ stops windows.h
including winsock.h.
Error:
```
[748/1041] Compiling C object ext/dtls/gstdtls.dll.p/gstdtlscertificate.c.obj
FAILED: ext/dtls/gstdtls.dll.p/gstdtlscertificate.c.obj
[...]
Windows Kits\10\include\10.0.17763.0\shared\ws2def.h(235): error C2011: 'sockaddr': 'struct' type redefinition
Windows Kits\10\include\10.0.17763.0\um\winsock.h(482): note: see declaration of 'sockaddr'
```
[1] https://stackoverflow.com/a/1372836
Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5770>
The original idea was to select the type of mapping (either using derive images
or downloading the image) in runtime, under the assumption that both methods
shared the same memory layout (offsets and strides), because a single
GstVideoMeta is assigned by the buffer pool at allocation time. Nonetheless, in
recent hardware this assumption is invalid, raising memory access errors.
This patch removes completely the mapping type selection at runtime, using the
method selected when the allocator is configured, synced with the bufferpool
allocation.
This problem was fixed originally for iHD driver only. But now it makes sense to
remove all of it.
Original-patch-by: Mengkejiergeli Ba <mengkejiergeli.ba@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5760>
When exporting a DMABuf from a VASurface the user might tell that the surface
was allocated with certain fourcc, but the returned VADRMPRIMESurfaceDescriptor
migth tell a different fourcc, as in the case or radeonsi driver, for duplicated
fourcc, such as YUY2 and YUYV.
Originally it was supposed to be a failed exportation. This patch relax this
validation by allowing different fourcc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5760>
In multi-card scenario, user can set GST_MSDK_DRM_DEVICE env variable to
choose the device. This patch can align vpl's queried results with the
users' choice by passing deviceID when creating mfx implementation.
Co-authored-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5697>
This is a bit of a hack solution has I think the correct solution is to
expose model caps on sinkpad (eventually sinkpads). Till then I think
this is reasonable.
- Add a property to onnxinference to set datatype.
- Fix internal buffer allocation size based on datatype.
- Extract method to remove alphe channel and convert to planar image
when requested. Also template the method to support writing to buffers
of different datatype.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5761>
The `GstFlowCombiner` is responsible for tracking the flow of each
stream and handle the overal flow return value. Without that, we
can end up with the following scenario:
- Audio+video stream
- Only the video stream is linked downstream
- The audio stream goes EOS, video doesn't yet
-> We update the Flow in the combiner with OK as all streams are not EOS
- Video goes EOS because downstream returned EOS
-> `qtdemux` returns `FLOW_OK` forever because the unlinked audio pad
has `last_flowret==FLOW_OK`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5724>
Windows does not support fork() so all tests will run in a single
process, and global variables will be reused across multiple tests.
Thus, each test should reset global variables.
Also, setup pad chain/event functions before playing state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5752>
When requesting an asset from different threads we had no
guarantee that during the time we lookup an asset (which didn't exist)
and the time we create the asset with the same type/ID another thread
could not end up doing the same thing. In turns we could end up with
2 different threads loading the exact same asset and the cache
basically forgetting about one of the entries meaning that the user
would never get notified about one of those being ready to be used.
There was also the case when requesting "sync" where the user was
requesting an asset while another thread is creating it so it was
still in "ASSET_INITIALIZING" state, meaning that the returned asset
would be NULL which would be considered as an error in apps.
Since the cache lock is recursive we can just take it during the whole
ges_asset_request_async call and have other method still hold it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5732>
There is an existing PMT mapping between PCR_%s and an mpegtsmux sink
pad name, where %s equals the program number that the PCR corresponds
to. We re-purpose this functionality to also support a mapping between
PCR_%s and an arbitrary PID. If this mapping is set, then the header PCR
PID is set to this value, and PCR is attached to the stream with this
PID.
Note: the current implementation also attaches PCR to the video stream,
so this may be inefficient.
Co-authored-by: Jordan Yelloz <jordan.yelloz@collabora.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5726>
Clip tile rows and cols to 64 as describe in AV1 specification
to avoid writing outside array range but preserve sb_cols
and sb_rows value which are used to futher computation.
Fixes ZDI-CAN-22226 / CVE-2023-44429
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5702>
in the case of an upstream element proposing a buffer pool,
use it to allocate the buffer image with the given parameters
set by the upstream element.
Besides the buffer pool handling is sync'd with GstBaseTransform
base class.
See the case of vulkanupload ! vulkanh264enc
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5651>
When the subclass attempts to finish without an explicit `out_buffer`,
we take a buffer from our adapter. We need to make this buffer writable
before copying the metadata.
This led to data races such as in the following pipeline, which randomly
messed up the buffer PTS:
gst-launch-1.0 -e audiotestsrc timestamp-offset=5555 num-buffers=100 \
! opusenc ! tee name=t ! queue ! opusparse ! fakesink silent=0 \
t. ! queue ! opusparse ! fakesink silent=0 -v | grep '0000, dur'
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5718>
Direct3D feature level 10 supported GPUs were released
more than 15 years ago, around the time when Windows
Vista / 7 were released. Also our d3d11 plugin/library
does not support feature level 9.x very well already.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5709>
The tags and caps were leaked for unknown streams, I'm not sure they'd be valid
in that case, but better safe than sorry.
The tags ownership is transfered when calling `gst_adaptive_demux_track_new()`
so unreffing those afterwards was a mistake.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5714>
We were previously always querying index 0, and while the number of planes per
buffer will never change, it seems more proper to query the right buffer rather
than always the first one.
This was found while reading strace logs, and wondering why the
V4L2_BUF_FLAG_MAPPED flag was present on all ¬0 indices even though that
happened before VIDIOC_EXPBUF.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5647>
- GstAnalyticRelationMeta is a base class for analytics
meta. It's able to store analytics results (GstAnalyticRelatableMtd)
and describe the relation between each analysis results.
- GstAnalysisRelationMeta also contain an algorithm able to explore
analysis results relation using a bfs.
- Relation(edge) between analysis results (vertice) are stored in an adjacency-matrix
that allow to quickly identify if two analysis results are related and by
which relation they related. It also work for indirect relation
and can provide the path of analysis results by which two
analysis results are related.
- One allocation per buffer to store analysis results. Here we rely on
the application to guess how much space will be required to store all
analysis results. This is something that could be improved
significantly but it's a starting point.
- Define common analysis results, classification, object-detection,
tracking that are subclass of GstAnalyticRelatableMtd. The also
provide exemple of how to extend GstAnalyticRelatableMtd to have them
benefit for the mechanim to express relation with other analysis
results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4962>
Whenever that caps changes does not imply that a new segment will start.
Don't reset the last_ts if only the caps have changed. This fixes issues
if you have a stream without only first frame with TS=0, and have resolution
change happening. This was a regression introduced by !3059, which issue was
described in #1352. The reported issue is still fix after this change.
Fixes#1034
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5687>
During the video session memory allocation, the property flags can
be different from the expected ones, so do not expect all the
property flags and test it with G_MAXUINT32
It's failing with driver 525.47.26 and NVidia HW NVIDIA GeForce
RTX 3050 and 2060
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4850>
The fake video decoder ignores input bitstream except
to enforce caps restrictions. It reads video width,
height and framerate from caps. Then it just pushes
video frames without doing any decoding.
The fake video decoder just draws a snake moving from
left to right in the middle of the frame. This is a
light weight drawing while it still provides an idea
about how smooth is the rendering.
The fake video decoder inherits from GstVideoDecoder.
It is useful to measure how smooth will be the whole
rendering pipeline if you had the most efficient video
decoder. Also useful to bisect issues for example when
suspecting issues in a specific video decoder.
Handles mpeg2, mpeg4, h263, h264, theora, vp8, wmv3, msmpeg,
flash-video, vp6, vp9, wmv1, wmv2, divx but more can be
added if needed.
For now it can only output RGBA, RGBx, BGRA, BGRx.
Its rank is 0 (none) but I added a property to change it so
that it can be selected by decodebin.
gst-launch-1.0 fakevideodec rank=512 \
playbin uri=http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4http://bugzilla.gnome.org/show_bug.cgi?id=723778Closes#679
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5636>
From a multimedia perspective GLES >= 2 has the big advantage of
supporting external textures (`OES_EGL_image_external` /
`OES_EGL_image_external_essl3`), allowing various YUV formats to be
imported directly by drivers.
It appears unlikely by now that the extension will ever be ported to
GL with Vulkan becoming more popular, leaving GL without an "official"
way to import YUV formats.
Further more, for Gst internal purposes it's likely that GLES2 works
equally well if not better on most drivers these days, especially on
embedded devices.
Thus switch the default for EGL context creation to GLES2. This won't
affect apps that create their own context, but `gst-launch-1.0` etc.,
which are often used for testing so people don't have to pass
`GST_GL_API=gles2`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5509>
By sealing for future writes, we broke Wayland SHM support. It seems like the
wayland library maps the SHM in read/write mode. This is visible through no
display and an error message like this:
wl_shm@7: error 2: failed mmap fd 43: Operation not permitted
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5684>
Take the case into account when user filters have been set before the
source gets updated.
Note that the further linking of the filters, if present, happens below
in the `gst_camera_bin_check_and_replace_filter()` calls.
The audio filter is still affected by the same issue but left out for
now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5527>
If this property is enabled then the jitterbuffer will do the normal PTS
calculations according to the configured mode instead of making use of
the RFC7273 media clock.
The timestamp calculated from the RFC7273 media clock will only be
stored in the reference timestamp meta, if addition of that meta is enabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
When this property is used, it is assumed that the system clock is
synced close enough to the media clock used by an RFC7273 stream.
As long as both clocks are at most a few seconds from each other this
will give the correct results and avoids having to create an actual
network clock that has to sync first.
If the system clock is actually synchronized to the media clock then
everything will behave exactly the same, otherwise the reference
timestamp meta will be correct but the buffer timestamps will be off by
the difference between the two clocks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
Do more checks for clock equality than just checking pointers. The same
NTP/PTP clock might be used as pipeline clock but a new instance, so
instead also check what clock they are synced to.
Also handling setting / resetting of the media clock and pipeline clock
correctly by resetting the media clock's state accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
This allows configuring the TTL that is used for multicast packets sent
out on the sockets, and is defaulting to 1 as before. The default might
change at some point.
In some networks multiple hops are needed to reach the PTP clock and
this allows to configure GStreamer in a way that works in such networks.
At a later time, per-domain or per-interface TTL configurations might be
added when needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5649>
Even if IDXGIOutput6 says current display colorspace is HDR,
captured texture via IDXGIOutputDuplication::AcquireNextFrame()
is converted frame by OS unless we use IDXGIOutput5::DuplicateOutput1()
with DXGI_FORMAT_R16G16B16A16_FLOAT format, in order for captured
frame to be scRGB color space. Then application should perform
tonemap operation based on reported display white level, color primaries, etc.
Since we don't have any tonemapping implementation, ignores colorimetry
reported by IDXGIOutput6.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3128
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5671>
This commit makes sure that pads are valid for linking
after the pads has been temporarily unlocked in the linking process.
Not doing this opens up for a race condition where
pads potentially can be linked twice.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5670>
