For alaw/mulaw we should also try to initialize the channel positions in the
ringbuffer's audio info. This allow pulsesink to directly use the channel
positions instead of using the default zero-initialized ones, which doesn't
work well.
https://bugzilla.gnome.org/show_bug.cgi?id=751144
This new clock slaving method allows for installing a callback that is
invoked during playback. Inside this callback, a custom slaving
mechanism can be used (for example, a control loop adjusting a PLL or an
asynchronous resampler). Upon request, it can skew the playout pointer
just like the "skew" method. This is useful if the clocks drifted apart
too much, and a quick reset is necessary.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
https://bugzilla.gnome.org/show_bug.cgi?id=708362
We only get here if we don't have any srcpad caps, and we're going
to override the GstAudioInfo a few lines below anyway without ever
using it if for whatever reason we get caps here.
memcmp will blindly compare the reserved fields, as well as any
padding the compiler may choose to sprinkle in GstSegment.
Fixes valgrind complaints in unit tests, as well as some found via
https://bugzilla.gnome.org/show_bug.cgi?id=738216
When the ringbuffer is deactivated and then acquired, if the audio clock
provided by the sink gets reset to zero, we need to add an offset to the
clock to make sure that subsequent samples are written out at the right
times. While we need to leave this to derived classes to take care of
when they provide their own clock (since that clock may or may not be
reset to zero), we can do this ourselves if we know the provided clock
is our own (which does reset to zero on a re-acquire).
Make sure to update the output segment to track the segment
we're decoding in, but don't actually push it downstream until
after buffers are decoded.
https://bugzilla.gnome.org/show_bug.cgi?id=744806
If we have timestamps on input buffers and are in trickmode no-audio
mode, then don't pass anything to the subclass for decode and simply
send gap events downstream
Only for forward playback for now - reverse requires accumulating
GAP events and pushing out in reverse order.
https://bugzilla.gnome.org/show_bug.cgi?id=735666
In trickmode no-audio mode, or when receiving a GAP buffer,
discard the contents and render as a GAP event instead.
Make sure when rendering a gap event that the ring buffer will
restart on PAUSED->PLAYING by setting the eos_rendering flag.
This mostly reverts commit 8557ee and replaces it. The problem
with the previous approach is that it hangs in wait_preroll()
on a PLAYING-PAUSED transition because it doesn't commit state
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=735666
The decoder can fail to drain on EOS if there was only one gather
set, because it will never have sent the segment event downstream
and set the output segment, and fail to detect that the rate < 0.0
Make sure to send pending events before sending all the gather data
for decode.
Don't render out silence samples to a buffer, just
start the clock running, since any buffer with the
GAP flag will be discarded in render() now anyway.
Make the base audio sink throw away buffers marked GAP, or all
incoming buffers when performing a trick play with
GST_SEGMENT_TRICKMODE_NO_AUDIO flag set, and make sure to start
the ringbuffer when that happens so the clock starts running.
Preserve the timing calculations when rendering, so state is all
updated the same, but just don't render samples.
https://bugzilla.gnome.org/show_bug.cgi?id=735666
Some audio sink sub-classes (pulsesink) don't start their clock
when the ringbuffer starts, but always have to on EOS. When we
explicitly need to start the ringbuffer, make sure sub-classes will
do it by (ab)using the existing eos_rendering flag.
Otherwise calls to get the clock time might change its internal state
and the internal/external time for calibration get unbalanced leading to
a clock jump
https://bugzilla.gnome.org/show_bug.cgi?id=740834
The same was done already in the decoder, and we cleaned some state just above
manually that would also be taken care of by reset().
This makes sure that the element is in the same state before start() is called
the very first time and every future call after the element was used already.
The implementation of that vfunc might want to use the object lock for
something too. It's generally not a good idea to keep the object lock while
calling any function implemented elsewhere.
Also the ringbuffer can only be NULL at this point, remove a useless if block.
And in the sink actually hold the object lock while setting the ringbuffer on
the instance. Code accessing this is expected to use the object lock, so do it
here ourselves too.
Allows subclasses to do custom caps query replies.
Also exposes the standard caps query handler so subclasses can just
extend on top of it instead of reimplementing the caps query proxying.
Allows decoders to proxy downstream restrictions on caps.
Also implements accept-caps query to prevent regressions caused by the
new fields on the return of a caps query that would cause the accept-caps
to fail as it uses subset caps comparisons
The spec mentions a version of the MPEG-2 frame with a base frame and
extension frame. I don't have IEC 13818-3 to figure out what that is,
and don't see any references in search results, so it's a FIXME for now.
https://bugzilla.gnome.org/show_bug.cgi?id=736797
When playing chained data the audio ringbuffer is released and
then acquired again. This makes it reset the segbase/segdone
variables, but the next sample will be scheduled to play in
the next position (right after the sample from the previous media)
and, as the segdone is at 0, the audiosink will wait the duration
of this previous media before it can write and play the new data.
What happens is this:
pointer at 0, write to 698-1564, diff 698, segtotal 20, segsize 1764, base 0
it will have to wait the length of 698 samples before being able to write.
In a regular sample playback it looks like:
pointer at 677, write to 696-1052, diff 19, segtotal 20, segsize 1764, base 0
In this case it will write to the next available position and it
doesn't need to wait or fill with silence.
This solution is borrowed from pulsesink that resets the clock to
start again from 0, which makes it reset the time_offset to the time
of the last played sample. This is used to correct the place of
writing in the ringbuffer to the new start (0 again)
https://bugzilla.gnome.org/show_bug.cgi?id=737055
Move the assert to the error handling block at the end of the function so the
the logging is still triggered. Reword the logging slightly and add another
comment to hint what went wrong.
Fixes#737138
Issue:
During a PAUSED->PLAYING transition when we are rendering an audio buffer in AudioBaseSink
we make adjustments to the sink's provided clock i.e. fix clock calibration using the external
pipeline clock, within "gst_audio_base_sink_sync_latency function inside gstaudiobasesink.c".
For the calibration adjustment we need to get the sink clock time using "gst_audio_clock_get_time".
But before calling "gst_audio_clock_get_time" we acquire the Object Lock on the Sink. If sink is
a pulsesink, "gst_audio_clock_get_time" internally calls "gst_pulsesink_get_time" which needs to
acquire Pulse Audio Main Loop Lock before querying Pulse Audio for its stream time using
"pa_stream_get_time". Please see "gst_pulsesink_get_time in pulsesink.c".
So the situation here is we have acquired the Object lock on Sink and need PA Main Loop Lock.
Now Pulse Audio Main Thread itself might be in the process of posting a stream status
message after Paused to Playing transition which in turn acquires the PA Main loop lock and
needs the Object Lock on Pulse Sink. This causes a deadlock with the earlier render thread.
Fix:
Do not acquire the object Lock on Sink before querying the time on PulseSink clock. This is
similar to the way we have used get_time at other places in the code. Acquire it after the
get_time call. This way PA Main loop will be able to post its stream status message by
acquiring the Sink Object lock and will eventually release its Main Loop lock needed for
gst_pulsesink_get_time to continue.
https://bugzilla.gnome.org/show_bug.cgi?id=736071
As was done for the base video decoder in commit 695675, don't
flush out the decoder on a new SEGMENT event. Segment events
may be a new segment, but are also often segment updates for
the current segment where the old data should be kept. For new
segments, a STREAM_START event will already trigger a drain, but
make sure to flush any remaining partial data then as well.
https://bugzilla.gnome.org/show_bug.cgi?id=734666
With most decoder libraries, and especially when accessing codecs via
OpenMAX or similar APIs, we don't have the ability to properly related
the output buffers to a number of input samples. And could e.g. get
a fractional number of input buffers decoded at a time.
Previously this would in the end lead to an error message and stopped
playback. Change it to a warning message instead and try to handle it
gracefully. In theory the subclass can now get timestamp tracking
wrong if it completely misuses the API, but if on average it behaves
correct (and gst-omx and others do) it will continue to work properly.
Also add a test for the new behaviour.
We don't change it in the encoder yet as that requires more internal logic
changes AFAIU and I'm not aware of a case where this was a problem so far.
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
We were returning in various places without unreffing the caps, and
we were also leaking (overwriting) the caps we got from _get_current_caps()
Spotted by Haakon Sporsheim in #gstreamer
Clock slaving can clip start time to zero, giving us a shorted
duration than we originally got. To keep in sync, we must then
discard the samples falling before that zero timestamp.
This possibly fixes random distortion caused by constant PA
underflows which are never resynced.
Fixes problem in audioconvert, which would end up using
a mixmatrix when converting between different mono format
because it thinks MONO positioning is different from
unpositioned channels, which is not the case in this
special case. The mixmatrix would end up being 0.0 so
audioconvert would convert to silence samples.
https://bugzilla.gnome.org/show_bug.cgi?id=724509
We call the _get_time function from the provided clock and we don't lock
the sink object for performance reasons. Make sure we only read and
check variables once so that they don't change while we are executing
the code.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=720661
For default caps generation when handling gap events that are sent
before any buffer, try to use caps that are closer to what upstream
provided to avoid fixating rate or channels to 1 as default.
So there are the steps:
1) Try to set rate, channels and channel-mask from upstream if provided
2) Fixate the rate and channels to the default rate and channels from
audio lib
3) Fixate the caps just to be sure everything is fixed
4) If no channel-mask was provided and channels > 2, use a default
channel-mask (taken from audioconvert code)
https://bugzilla.gnome.org/show_bug.cgi?id=722144
Before trying to generate a default fixated caps when handling a gap
event, make sure that the same strategy that is used when handling
a buffer has been attempted. Otherwise audiodecoder will ignore
upstream caps settings such as rate and channels and will likely
end with a caps with channels=1 and rate=1.
https://bugzilla.gnome.org/show_bug.cgi?id=722144
Port a change from audiobasesink from def07410, to ignore setcaps
when the caps don't actually change, and avoid a reconfiguration
and reset of the ringbuffer in that case.
And don't assume in other code that set_format() preserves any fields at
all. These assumptions were already made here for fields that were changed
by set_format().
If there are no caps from the audio decoder when handling a GAP
event - as when one is received right at the start on a DVD without
initial audio - then choose any default caps for downstream and
then send the GAP, so the audio sink has a configured format in
which to start the ringbuffer.
Also, make the audio sink reject a GAP without caps with a clearer
error message.
Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=603921
Fixes "Unitialized Scalar Variable" issues reported by Coverity.
Has the added advantage of detecting whether somebody *does* use those
fields (ending up with a invalid address).
https://bugzilla.gnome.org/show_bug.cgi?id=720810
So that it avoids to send an allocation query twice.
One from an early call to gst_audio_encoder_negotiate from a
subclass, then one from gst_audio_encoder_allocate_output_buffer.
Which means that previously gst_audio_encoder_negotiate was not
clearing the GST_PAD_FLAG_NEED_RECONFIGURE even on success.
Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=719684
Raise an error in case no frames are decoded before EOS and we
have input, meaning that data was received but it was somehow invalid.
Based on the videodecoder change, merged here for consistency.
https://bugzilla.gnome.org/show_bug.cgi?id=711094
Allows using -1 to make audiodecoder never post an error message
after decoding errors.
Based on the videodecoder change, merged here for consistency.
https://bugzilla.gnome.org/show_bug.cgi?id=711094
gst_audio_ring_buffer_set_channel_positions() checks whether the given
positions are identical with the current setup and returns
immediately if so. But it also clears need_reorder flag before this
comparison, thus this flag might be wrongly cleared if the function is
called twice with the same channel positions.
Move the flag clearance after the check.
https://bugzilla.gnome.org/show_bug.cgi?id=709754
This avoids triggering plenty of extra code/methods/overhead downstream when
we can just quickly check whenever we want to set caps whether they are
identical or not
https://bugzilla.gnome.org/show_bug.cgi?id=706600
We have no way of tell the caller of the exact error (e.g. if we're flushing),
so will have to wait until the caller uses API that returns a GstFlowReturn,
for example when pushing this buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=700006
Clamp timestamp interpollation to 0 to avoid going negative. This should not
happen, really, but until the interpolation is improved this seems better.
ringbuffer was released after setting values to its spec field
in gst_audio_base_src_setcaps(). This led to failure in case
gst_audio_base_src_setcaps() is called more than one time.
https://bugzilla.gnome.org/show_bug.cgi?id=696540
The _1_0 suffixed environment variables override the
non-suffixed ones, so if we're in an environment that
sets the _1_0 suffixed ones, such as jhbuild, we need
to set those to make sure ours actually always get
used.
We need to mark our clock as using some other clock source. Alsa source uses the
clock type to decide if it can use alsa driver timestamps or not.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=690465
Use new ringbuffer ERROR state to make all the various
threads bail out correctly when the subclass posts an
error. It's a bit iffy to communicate this properly
between the different bits of code.
https://bugzilla.gnome.org/show_bug.cgi?id=690197
In SKEW mode, use next_sample == -1 to check for the first sample
when starting to read samples so it resyncs the ringbuffer and
timestamps are ok.
Suggestion from Teemu Katajisto <teemu.katajisto@digia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=648359
This reverts commit e39fbe6b7e.
Looks like we need to pass the full .la file after all in a setup
with libtool, or it might not find the library, e.g. like
ERROR: can't resolve libraries to shared libraries: gstfft-1.0
Conflicts:
gst-libs/gst/audio/Makefile.am
gst-libs/gst/pbutils/Makefile.am
Also see https://bugzilla.gnome.org/show_bug.cgi?id=603710
These are now converted into silence buffers if they have
a duration or cause the ringbuffer and clock to be started
if they don't have a duration.
Fixes bug #685273.
Just change default value, since we also don't want to fail
if we want to deactivate and aren't active or want to activate
and are already active.
https://bugzilla.gnome.org/show_bug.cgi?id=685490
Only provide a clock when we are not flushing, this means that we have posted a
PROVIDE_CLOCK message. We used to check if we were acquired but that doesn't
work anymore now that we do the negotiation async in the streaming thread: it's
possible that we are still negotiating when the pipeline asks us for a clock.
Make it possible for subclasses to provide the timestamp (as an absolute time
against the pipeline clock) of the last read data.
Fix up alsa to provide the timestamp received from alsa. Because the alsa
timestamps are in monotonic time, we can only do this when the monotonic clock
has been selected as the pipeline clock.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=635256
Sometimes the decoder would use the allocator for something else than just
allocating output buffers, for example, querying different parameters.
This patch expose a getter accessor for the negotiated memory allocator.
Sometimes the encoder would use the allocator for something else than just
allocating output buffers, for example, querying different parameters.
This patch expose a getter accessor for the negotiated memory allocator.
The decoder might have been de-activated in the meantime (resulting
in NULL pad caps).
If the decoder really isn't configured, then it will error out further
down when checking whether the GST_AUDIO_INFO_IS_VALID()
https://bugzilla.gnome.org/show_bug.cgi?id=667562
When the ringbuffer gets restarted (like in setcaps), we *will* have
to resync against the new values.
Without this we end up blindly assuming the new samples align to the
old ones.
If we're in continuous mode where we'll play the entire CD from
start to finish, send a TOC event downstream so any downstream
muxers can write a TOC to indicate where the various tracks
start and end.
Add a flag argument to the pack and unpack function so that we can expand it
later when needed. We could for example prefer a High Quality pack/unpack
operation later.
DTS type I-III specify the burst length in bits. Only type IV (which we
do not currently support) needs it to be specified in bytes. Thanks to
Julien Moutte for pointing this out.
Avoid pushing out buffers with the same timestamp only if the out buffers are
decoded from the same input buffer. Instead keep the timestamps when upstream
pushes consecutive buffers with the same ts.
... so subclass can also rely upon never being bothered with some NULL buffer
it can't do any interesting with, or with any data before it received
any format configuration (and setup properly).
The available channel positions are all channels from SMPTE 2036-2-2008
(in that order) and DTS Coherent Acoustics, which are basically all 28
channels that currently can appear.
The channels are now expressed in the caps as a channel-mask, which
describes which of the channels are present, and an optional
channel-reorder-map, which must only be used after negotiation for
fixated caps.
For negotiation only the channel-mask and the channel count is relevant
and all elements are expected to handle all reorder maps. Elements that
don't can use the new API to reorder an audio buffer from any order to
another order.
This simplifies negotiation a lot while still having as few reorderings
necassary as possible and still allow all kinds of channel layouts.
Whereas the previous default 0 was backwards compatible in that it lead
to erroring out immediately upon any error, elements that are really
ported and using the base class error macro can be assumed to intend to
improve behaviour rather than maintaining the old one. So, make it easy
on those and any future one and tolerate some errors by default, as intended.
Fixes#666579.
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.
Replace g_thread_create() with g_thread_try_new().
Make appsink return a GstSample. Remove the pull_buffer_list method because it
is not very useful anymore.
Pass GstSample to the conversion function.
Update playbin2 and examples
