7211 commits

This branch

This branch

All branches

Author	SHA1	Message	Date
Tim-Philipp Müller	80e43452a1	checks: add test for leak to rtpbin unit test ... See #591476.	2009-08-14 13:47:18 +01:00
Olivier Crête	7f569ca9c8	rtpbin: Fix reference leak ... Fixes #591476.	2009-08-14 13:47:18 +01:00
Zaheer Merali	8dd9583357	dvdec: set bottom field first on PAL interlaced content, not top field first ... DV interlaced content is always bottom field first. Fixes #591712.	2009-08-14 13:34:53 +01:00
Hans de Goede	10d41286d5	v4l2src: fix 'hang' with some cameras caused by bad timestamping if no framerate is available ... For cameras/drivers that don't support e.g. VIDIOC_G_PARM we'd end up without a framerate and would try to divide by 0, causing run-time warnings and all frames to be timestamped with 0, which makes sinks that sync against the clock drop them, causing 'hangs' (observed with the pwc driver and a Logitech QuickCam Pro 4000). So if we do not know the framerate, simply don't adjust the timestamps. Fixes #591451.	2009-08-14 13:30:31 +01:00
Filippo Argiolas	a3a61f8940	v4l2src: clear format list in READY->NULL ... Clear format list and probed caps when going to NULL so if a new device is set we'll probe the formats again instead of using previously detected ones. Fixes bug #591747.	2009-08-14 10:15:43 +02:00
Tim-Philipp Müller	352e071660	0.10.15.2 pre-release	2009-08-11 17:30:41 +01:00
Tim-Philipp Müller	1edaca62f0	Add myself to MAINTAINERS file and update Wim's e-mail.	2009-08-11 15:25:39 +01:00
Tim-Philipp Müller	9590df3c2e	v4l2: fix make distcheck by disting some more headers	2009-08-11 03:08:01 +01:00
Tim-Philipp Müller	dbad1d424a	docs: update	2009-08-11 02:43:35 +01:00
Tim-Philipp Müller	4701696a92	Move rtpmanager from -bad to -good. ... Hook up build infrastructure (autotools, docs, unit test).	2009-08-11 02:43:09 +01:00
ric	92abe07e80	rtpsource: avoid buffer leak on bad seqnum ... Fixes #590797	2009-08-11 02:30:47 +01:00
Wim Taymans	9f68303a2e	rtpsource: allow for NULL caps on buffers ... Add the NULL caps check where it matters and also cover another case of potential NULL caps. Fixes #590030	2009-08-11 02:30:47 +01:00
Olivier Crête	e37844fdc7	rtpsource: Incoming buffers do not always have caps	2009-08-11 02:30:47 +01:00
Wim Taymans	3091137217	rtpsession: avoid doing lip-sync in BYE ... When we get a BYE packet, don't do lip-sync with the SR inside because some senders have trouble constructing valid SR packets after BYE.	2009-08-11 02:30:47 +01:00
Wim Taymans	3747ede14a	rtpbin: don't do lip-sync after a BYE ... After a BYE packet from a source, stop forwarding the SR packets for lip-sync to rtpbin. Some senders don't update their SR packets correctly after sending a BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with the current lip-sync instead.	2009-08-11 02:30:47 +01:00
Wim Taymans	d2ef095b80	rtpbin: only reconsider once for BYE ... When iterating the sources of a BYE packet, don't signal a reconsideration for each of them but signal after we handled all sources.	2009-08-11 02:30:47 +01:00
Olivier Crête	e8c6bcdf8d	rtpsession: Free conflicting addresses on finalize	2009-08-11 02:30:46 +01:00
Wim Taymans	428368b44a	rtpbin: use new method for netaddress to string	2009-08-11 02:30:46 +01:00
Wim Taymans	512ba93159	rtpbin: do better cleanup of the src ghostpads ... Connect to the pad-removed signal of the ptdemux elements so that we remove the ghostpads for them. Fixes cleanup when going to NULL as well as when releasing the sinkpads. Fixes #561752	2009-08-11 02:30:46 +01:00
Wim Taymans	d7a8663e05	rtpsession: add a comment	2009-08-11 02:30:46 +01:00
Wim Taymans	c53e595d23	rtpbin: add SDES property ... Remove all individual SDES properties and use one sdes property that takes a GstStructure instead. This will allow us to add more custom stuff to the SDES messages later.	2009-08-11 02:30:46 +01:00
Wim Taymans	9f330992f5	rtpbin: add SDES property that takes GstStructure ... Remove all individual SDES properties and use one sdes property that takes a GstStructure instead. This will allow us to add more custom stuff to the SDES messages later.	2009-08-11 02:30:46 +01:00
Wim Taymans	d8496fb105	rtpbin: removed old gstrtpclient	2009-08-11 02:30:45 +01:00
Branko Subasic	779f67adc4	rtpbin: add support for buffer-list ... Add support for sending buffer-lists. Add unit test for testing that the buffer-list passed through rtpbin. fixes #585839	2009-08-11 02:30:45 +01:00
Tim-Philipp Müller	c5793a6a45	Make build without warnings with debugging disabled	2009-08-11 02:30:45 +01:00
Olivier Crête	cf873498d2	rtpbin: Transform the right session sdes message ... Fixes #584165	2009-08-11 02:30:45 +01:00
Olivier Crête	dee142a945	Add ssrc to application/x-rtp-source-sdes structure	2009-08-11 02:30:45 +01:00
Wim Taymans	bf15048f42	rtpsouce: the network address is in network order ... Bring the network address in netowkr byte order to the host order.	2009-08-11 02:30:45 +01:00
Wim Taymans	91eef69131	rtpsource: byteswap the port from GstNetAddress ... Since the port in GstNetAddress is in network order we might need to byteswap it before adding it to the source statistics.	2009-08-11 02:30:45 +01:00
Wim Taymans	51251d0fa8	rtpbin: remove ptdemux ghostpads	2009-08-11 02:30:44 +01:00
Wim Taymans	57653143c3	tests: add receive rtpbin unit test	2009-08-11 02:30:44 +01:00
Wim Taymans	7d9c2d20df	rtpbin: add to new signal to remove SSRC pads	2009-08-11 02:30:44 +01:00
Ali Sabil	6c684e59c6	ssrcdemux: emit signal when pads are removed ... Add action signal to clear an SSRC in the ssrc demuxer. Add signal to notify of removed ssrc. See #554839	2009-08-11 02:30:44 +01:00
Wim Taymans	48872d8215	rtpbin: use our ghostpads instead of its target ... Since we keep a reference to our ghostpads, we can use them to track sessions. This avoid us having to mess with the target of the ghostpad.	2009-08-11 02:30:44 +01:00
Wim Taymans	02b34602c4	tests: more rtpbin checks	2009-08-11 02:30:44 +01:00
Wim Taymans	901b7f3b69	rtpbin: don't warn when getting request pads twice ... Allow getting the request pads multiple times, just return the previously created pads.	2009-08-11 02:30:44 +01:00
Wim Taymans	0ae6e3603b	rtpsource: add RTP and RTCP source address ... Add the RTP and RTCP sender addresses in the stats structure.	2009-08-11 02:30:44 +01:00
Wim Taymans	62727e8fab	rtpsession: reuse source code for SDES ... Reuse the RTPSource object property instead of duplicating code.	2009-08-11 02:30:44 +01:00
Wim Taymans	232624c908	tests: add more rtpbin tests	2009-08-11 02:30:44 +01:00
Wim Taymans	1710d8a3a5	tests: add rtpbin unit test ... Add the beginnings of an rtpbin unit test Add some more stuff to .gitignore	2009-08-11 02:30:43 +01:00
Wim Taymans	1719af9113	rtpbin: set target state on new elements ... Set the state on newly added elements to the state of the parent. Add some debug info and do some cleanups	2009-08-11 02:30:43 +01:00
Wim Taymans	9c92ee6209	rtpbin: unref requests pads after releasing	2009-08-11 02:30:43 +01:00
Olivier Crête	a1c0bb2488	rtpbin: Implement releasing the streams ... See #561752	2009-08-11 02:30:43 +01:00
Olivier Crête	e77542d350	rtpbin: Keep jb signals handler ... Keep the signal handlers so they can be disconnected at release time See #561752	2009-08-11 02:30:43 +01:00
Wim Taymans	59d0590cd7	rtpbin: use the right lock for the sessions ... Use the right lock when iterating the sessions.	2009-08-11 02:30:42 +01:00
Olivier Crête	a9d6f3558c	rtpbin: Free session if request pads are released ... Free the session when all the request pads are released. Don't mess with the session list in free_session as it is called from a foreach on that list. Set the state of the upstream element to NULL first. See #561752	2009-08-11 02:30:42 +01:00
Olivier Crête	46388b767f	rtpbin: Implement relasing of the rtp recv pad	2009-08-11 02:30:42 +01:00
Olivier Crête	3509098468	rtpbin: Implement releasing of rtp send pads	2009-08-11 02:30:42 +01:00
Olivier Crête	2f6e9d7bf2	rtpbin: Implement release of the recv rtcp pad ... See #561752	2009-08-11 02:30:42 +01:00
Olivier Crête	47d4bb90c1	rtpbin: Implement releasing of rtcp src pad ... See #561752	2009-08-11 02:30:41 +01:00