While only filler packets should be allowed, for good measure also skip
any other KLV packets in the range where there could be index table
segments.
This fixes parsing of partitions with multiple index table segments,
which are separated by a filler packet, or other packets.
This is needed to know the PTS, without that we only know the DTS and
using that also for the PTS is wrong unless we have an intra-only codec.
If we can't get the temporal reordering from the index table, don't set
any PTS for non-intra-only codecs and let decoders figure out something.
https://bugzilla.gnome.org/show_bug.cgi?id=784027
When retrieving the `mxfdemux.structure` property, it leads to an
assertion as metadatas need to be resolved for the call to
mxf_metadata_base_to_structure to be valid.
The RSIZ capabilities tag stores the JPEG 2000 profile. In the case of
broadcast profiles, it also stores the broadcast main level, which
specifies the bit rate.
https://bugzilla.gnome.org/show_bug.cgi?id=782337
Also swap the linktype after we detected that we need to do
byteswapping. Fixes a problem with reading pcap files generated
on a machine with different endianness.
When caps changes while streaming, the new caps was getting processed
immediately in videoaggregator, but the next buffer in the queue that
corresponds to this new caps was not necessarily being used immediately,
which resulted sometimes in using an old buffer with new caps. Of course
there used to be a separate buffer_vinfo for mapping the buffer with its
own caps, but in compositor the GstVideoConverter was still using wrong
info and resulted in invalid reads and corrupt output.
This approach here is more safe. We delay using the new caps
until we actually select the next buffer in the queue for use.
This way we also eliminate the need for buffer_vinfo, since the
pad->info is always in sync with the format of the selected buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=780682
When there are more than 64 channels, we don't want to exceed the
bounds of the ordering_map buffer, and in these cases we don't want to
remap at all. Here we avoid doing that.
Based on a patch originally for plugins-good/interleave in
https://bugzilla.gnome.org/show_bug.cgi?id=780331
This duplicated property is no longer needed as there is now API to
allow bindings access GST_TYPE_ARRAY (see gst_util_get/set/object_array).
Additionnally, Python has proper overrides which will make this looks
like Python. A 2x2 matrix would be set this way:
element = matrix = Gst.ValueArray(Gst.ValueArray([1.0, -1.0]),
Gst.ValueArray([1.0, -1.0))
Notice that you need to "cast" each arrays to Gst.ValueArray, otherwise
there is an ambiguity between Gst.ValueArray and Gst.ValueList list type.
Fortunatly, Gst.ValueArray implements the Sequence interface, so it can
be indexed like normal python matrix.
Inserts AU delimeter by default if missing au delimeter from upstream.
This should be done only in case of byte-stream format.
Note that:
We have to compensate for the new bytes added for the AU, otherwise
insertion of PPS/SPS will use wrong offsets and overwrite wrong data.
Also mark the AU delimiter blob const, and use frame->out_buffer for
storing the output to keep baseparse assumptions valid.
Original-Patch-By: Michal Lazo <michal.lazo@mdragon.org>
Helped by Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=736213
Those are the rules:
In the SPS:
* if frame_mbs_only_flag=1 => all frame progressive
* if frame_mbs_only_flag=0 => field_pic_flag defines if each frame is
progressive or interlaced, thus the mode is 'mixed' in GStreamer
terms.
https://bugzilla.gnome.org/show_bug.cgi?id=779309
Doing lazy conversion of PCR values doesn't work right
when a PCR discont is encountered. Instead, convert PCR
values to the continuous timestamp domain as soon as we
encounter them and store that instead.
This element transforms a given number of input channels into a given number of
output channels according to a given transformation matrix. The matrix
coefficients must be between -1 and 1. In the auto mode, input/output channels
are automatically negotiated and the transformation matrix is a truncated or
zero-padded identity matrix.
https://bugzilla.gnome.org/show_bug.cgi?id=777376
See https://bugzilla.gnome.org/show_bug.cgi?id=773666
This would ideally be solved in baseparse but that requires further
thought at this point, and in the meantime it would be good to have
rawbaseparse not assert on this but handle it gracefully instead.
DVDs always have subpictures that start on an even Y
coordinate, but gstspu does more generic vobsubs these
days, so handle ones that start on an odd vertical position.
https://bugzilla.gnome.org/show_bug.cgi?id=777400
timecodestamper will post an element message which contains the current
timecode it just stamped. If a timecode was already found and not
replaced, it will still post it in a message.
https://bugzilla.gnome.org/show_bug.cgi?id=777048
... rather than when determining when to end the frame.
The opportunity to do so might not come when forced to drain,
and it seems nicer anyway to do so at parse wrapup time.
This happens if we had no CAPS event yet but e.g. got an EOS event. We
would then try to output a 0-sized buffer, but getting that from the
adapter will give an assertion, return NULL and then crash.
If they were not ported after 4+ years it seems unlikely that anybody is
ever going to need them again. They're still in the GIT history if
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774530
Compositor does not support it currently and it needs special support
for handling this correctly, and is rather non-trivial to implement for
all formats.
For frame->buffer, baseparse is doing that automatically for us. For
frame->output_buffer it doesn't and assumes that the subclass is already
doing that. Consistency!
This is useful e.g. if audio buffers should be exactly the duration of a
video frame, or if a audio buffers should never be too large because of
latency constraints.
The element is taking a fractional buffer duration, to allow working
with e.g. 1001/30000 as output duration and it accumulates rounding
errors in the buffer durations and compensates for them by making some
buffers one sample larger than the others.
https://bugzilla.gnome.org/show_bug.cgi?id=774689
We will allocate a screen area of width*height*bpp bytes, however this
calculation can easily overflow if too high width or height are given
inside the stream. Nonetheless we would just assume that enough memory
was allocated, try to fill it and overwrite as much memory as wanted.
Also allocate the screen area filled with zeroes to ensure that we start
with full-black and not any random (or not so random) data.
https://scarybeastsecurity.blogspot.gr/2016/11/0day-poc-risky-design-decisions-in.html
Ideally we should just remove this plugin in favour of the one in
gst-libav, which generally seems to be of better code quality.
https://bugzilla.gnome.org/show_bug.cgi?id=774533
Type cast has higher precedence than bitwise shift, so the third
argument will truncate to 8 bits and then shift right by 8 bits
resulting in constant zero.
https://bugzilla.gnome.org/show_bug.cgi?id=774293
Consistently use GST_ROUND_UP_4(width) as stride for
bayer buffers. Bayer data will usually come in widths
that are multiples of 4 anyway, so hopefully this
should not have any adverse impact on anyone in
practice.
Before, bayer2rgb required input buffers to are sized
accordingly, but then didn't actually round up when
calculating row offsets. rgb2bayer didn't use a rounded
stride nor buffer size.
https://bugzilla.gnome.org/show_bug.cgi?id=752014
rawvideoparse wouldn't error out on not-negotiated,
but would just keep on going, because it didn't pass
the flow return value back to the parent class and
thus upstream, so the source wouldnt' stop streaming.
MSVC warns about this because it's a C++ compiler, and this actually
results in useful things such as the incorrect 'gboolean' return value
for functions that return GstFlowReturn, so let's do explicit
conversions to reduce the noise and increase its efficacy.
With MSVC, this gives the following warning:
warning C4305: 'function': truncation from 'double' to 'gfloat'
Apparently, MSVC does not figure out what type to use for constants
based on the assignment. This warning is very spammy, so let's try to
fix it.
In file included from ../subprojects/gst-plugins-base/gst-libs/gst/video/video.h:27:0,
from ../subprojects/gst-plugins-bad/gst/segmentclip/gstvideosegmentclip.c:25:
../subprojects/gst-plugins-base/gst-libs/gst/video/video-format.h:27:39: fatal error: gst/video/video-enumtypes.h: No such file or directory
#include <gst/video/video-enumtypes.h>
^
compilation terminated.
https://ci.gstreamer.net/job/GStreamer-master-meson/269/console
In M2TS mode, we need an extra 4 bytes in the buffer, so need
to ensure the buffer can contain these. The allocation site
does not know the mode, so this is done in all cases.
This was a regression.
We only have a upstream-id via STREAM_START if we were in push-mode.
In pull-mode we need to create one.
Note: It would be good to eventually have that method (copied from
gst_pad_get_stream_id_internal()) public in the future
For each MpegTSBaseStream, we have a GstStream object which
subclasses can extend with information.
For each program a GstStreamCollection is created with all
GstStream from each stream.
When dealing with TIME-based input, the incoming stream could have
potentially changed completely.
In order to check whether it did or not, we need to re-check all sections
(PAT, PMT...). If it didn't, we will keep using the existing streams/pad,
and if it did we will act as if there was a program switch.
Fixes HLS streaming with decodebin3/playbin3
The default value of D-bit is changed to TRUE so discontinuity
is set for initial request and seek request as well.
Only set the e_bit flag for the CUSTOM_DOWNSTREAM event if
a cached buffer exists.
https://bugzilla.gnome.org/show_bug.cgi?id=770221
EAC3 bit streams shall be identified with a stream_type value of 0x87 when
transmitted as PES streams conforming to ATSC-published standards. It is specified
in ATSC Standard A/52.
https://bugzilla.gnome.org/show_bug.cgi?id=770528
The headers passed as parametter are relative to the build dir
basically "../subproject/gst-plugins-bad/gst-libs/gst/mpegts/XXX.h"
but that does not match what is needed at build time when building as
subproject, also we always add current dir as include_dir so we are
safe including directly.
And link mpegtsdemux against the 'math' library as it is needed.
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Matej Knopp <matej.knopp@gmail.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
_stdint.h is generated by Autotools and we don't really need it. All
supported platforms now ship with stdint.h. The only stickler was MSVC,
and since Visual Studio 2015 it also ships stdint.h now.
After seeking in aiff files the information about the data end offset is
discarded, leading to audio artifacts with metadata chunks at the end of
a file.
This patch retains the end offset information after a seek event.
https://bugzilla.gnome.org//show_bug.cgi?id=769376
timecodewait receives a timecode as an argument (either as string or as
GstVideoTimeCode - one is gst-launch-friendly and the other is code-friendly),
and it will drop all audio and video buffers until that timecode has been
reached.
https://bugzilla.gnome.org/show_bug.cgi?id=766419
When draining a program, we might send a newsegment event on the pads
that are going to be removed (and then the pending data).
In order to do that, calculate_and_push_newsegment() needs to know
what list of streams it should take into account (instead of blindly
using the current one).
All callers to calculate_and_push_newsegment() and push_pending_data()
can now specify the program on which to act (or NULL for the default
one).
Fixing the following warning when generating documentation:
xml/element-gaussianblur.xml:72: element refsect2: validity error :
ID GstGaussianBlur already defined
<refsect2 id="GstGaussianBlur" role="typedef">
^
Warning: multiple "IDs" for constraint linkend: GstGaussianBlur.
DOC Fixing cross-references
Fixing the following warning when generating documentation:
xml/element-chromium.xml:74: element refsect2: validity error :
ID GstChromium already defined
<refsect2 id="GstChromium" role="typedef">
^
Warning: multiple "IDs" for constraint linkend: GstChromium.
DOC Fixing cross-references
When skipping data, check if they are filler bytes. If so, drop the
data instead of skipping. We don't want to output filler bytes, but they
shouldn't cause a discontinuity.
https://bugzilla.gnome.org/show_bug.cgi?id=768125
If the input alignment claims AU alignment, each received
buffer should contain a complete video frame, so never hold over parts
of buffers for later processing. Also reduces latency, as packets
are parsed/converted and output immediately instead of 1 buffer
later.
Fixes a problem where an (arguably disallowed) padding byte on the
end of a buffer is detected as an extra byte in the following
start code, and messes up the timestamping that should apply to
that start code.
This is an automatic update with manual merges of running
"make update" in the doc/plugins directory. This should help
later maintenance of the plugins doc. A lot of plugin are
not referenced yet in the doc. Will come later.
And always set the sampling field on the src caps, if necessary guessing a
correct value for it from the colorspace field.
Also, did some cleanup: removed sampling enum - redundant.
https://bugzilla.gnome.org/show_bug.cgi?id=766236
The heuristic to choose between packetise or not was changed to use the
segment format. The problem is that this change is reading the segment
during the caps event handling. The segment event will only be sent
after. That prevented the decoder to go in packetize mode, and avoid
useless parsing.
https://bugzilla.gnome.org/show_bug.cgi?id=736252
A simple fix for the problem of creating new pads with duplicate
names when switching program, easier than the alternative of
trying to work out which pads might persist and manage that.
See https://bugzilla.gnome.org/show_bug.cgi?id=758454
Remove code that dealt with odd strides separately - there's
not really any overhead to just using 1 codepath for both matched
and unmatched stride output.
Add separate codepaths for BE vs LE GRAY16 input so they're
handled properly
As is done everywhere else, and avoids setting bogus values
And remove useless *<val> checks (we always provide valid values and
it's an internal function).
CID #1320700
This helps in cases where raw audio data is being delivered, but the
buffers do not come in sample aligned sizes. The new unalignedaudioparse
bin can be autoplugged and configures an internal audioparse element to
align the data. audioparse itself gets support for audio/x-unaligned-raw
input caps; the output caps then contain the same information, except that
the name is changed to audio/x-raw (since audioparse aligns the data).
This ensures that souphttpsrc ! audioparse still works.
https://bugzilla.gnome.org/show_bug.cgi?id=689460
When scanning for SCR / PTS / DTS, handle the case where
the pack header is followed by the optional system header,
so we can correctly collect timestamps in such cases.
https://bugzilla.gnome.org/show_bug.cgi?id=623860
When the file size is smaller than the configured 4MB scan
limit for timestamps, don't underflow the guard variable
when checking if it's time to stop.
Limit the backward SCR scan to the same 4MB as the PTS scan.
Add some comments.
