Commit graph

116 commits

Author SHA1 Message Date
Sebastian Rasmussen
c7e4217121 curlsmtpsink: Lock and don't send final boundary upon error
Previously GstCurlSmtpSink could cause the pipeline thread to end up
waiting for a stopped thread to perform work.

The scenario was that the sink could be rendering a buffer and waiting
for the curl transfer thread to have sent the data. As soon as the
transfer thread has copied all data to curl's data buffer in
gst_curl_base_sink_transfer_read_cb() then the render call would stop
waiting and return GST_FLOW_OK. While this takes place the transfer
thread may suffer from an error e.g. due gst_poll_wait() timing out.
This causes the transfer thread to record the error, claim (it is not
really true since there was an error) that the data has been sent and
that a response has been received by trying to signal the pipeline
thread (but this has already stopped waiting). Finally the transfer
thread stops itself. A short while later the pipeline thread may attempt
to push an EOS event into GstCurlSmtpSink. Since there is no check in
gst_curl_smtp_sink_event() to check if the sink has suffered from any
error it may attempt to add a final boundary and ask the, now deceased,
transfer thread to transfer the new data. Next the sink element would
have waited for the transfer to complete (using a different mechanism
than normal transfers through GstCurlBaseSink). In this case there was
an error check to avoid waiting if an error had already been seen.
Finally GstCurlSmtpSink would chain up to GstCurlBaseSink which would
then block waiting for a response (normally this would be prevented by
the transfer thread suffering the error claiming that it had been
received, but GstCurlSmtpSink clobbered this flag after the fact).

Now GstCurlSmtpSink avoids this by locking over the entire event handing
(preventing simultaneous changes to flags by the two threads) and also
by avoiding to initiate transfer of final boundary if an error has
already been seen.

Also add GST_FIXME() for remaining similar issue where the pipeline
thread may block indefinitely waiting for transfer thread to transfer
data but the transfer thread errors out and fails to notify the pipeline
thread that the transfer failed.

https://bugzilla.gnome.org/show_bug.cgi?id=767501
2016-06-11 11:25:13 +01:00
Patricia Muscalu
0fbbbd042a curlsink: catch an unknown error
In this case the socket callback has not been called
by libcurl and the curlsink has not been notified about any
connection problems by libcurl.
This indicates that it's a bug in libcurl so catch it as
an unknown error.

https://bugzilla.gnome.org/show_bug.cgi?id=754432
2016-04-04 17:48:55 +01:00
Vineeth TM
8cdfb13658 bad: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763081
2016-03-24 14:56:51 +02:00
David Fernandez
55ba6f1ee8 curlbasesink: don't send empty buffers
Fixes problem in curlhttpsink when qtmux uses faststart.

https://bugzilla.gnome.org/show_bug.cgi?id=762013
2016-02-17 11:10:22 +00:00
Vineeth TM
7c42ba97d7 plugins-bad: Fix example pipelines
rename gst-launch --> gst-launch-1.0
replace old elements with new elements(ffmpegcolorspace -> videoconvert, ffenc_** -> avenc_**)
fix caps in examples

https://bugzilla.gnome.org/show_bug.cgi?id=759432
2015-12-15 10:30:49 +00:00
Tim-Philipp Müller
734d5a79c5 Fix code indentation 2015-11-06 19:29:49 +00:00
Luis de Bethencourt
9fb7add179 curlsshsink: remove redundant else statement
Else statement is redundant when the if block finishes with an return.
2015-07-06 15:25:16 +01:00
Patricia Muscalu
c1bad1be5d curlsink: handle socket callback for active FTP connections as well
Since version 7.28.0, libcurl allows application to set
socket options for active FTP connections.

Bump libcurl requirement to version tested.

https://bugzilla.gnome.org/show_bug.cgi?id=749815
2015-05-25 19:37:53 +01:00
Branko Subasic
f00d21aec5 curlsmtpsink: add final boundary to all multipart emails
Corrected the final boundary mechanism so that a final boundary is
added to each mail with multipart content that is sent,
not just to the last one.

https://bugzilla.gnome.org/show_bug.cgi?id=741553
2014-12-19 13:16:43 +00:00
L. Sorin
09f0b03762 curlsshsink: use the locally defined types
Just a matter of coding style, makes the code a bit tidier...

https://bugzilla.gnome.org/show_bug.cgi?id=731581
2014-10-26 21:04:02 +00:00
Stefan Sauer
24fd4cd74c curlbasesink: strip newlines from curl debug messages
The messages we receive in the custom log handler might end with a newline and
are not \0 terminated. Copy the messages, trim and terminate them.
2014-10-16 14:12:19 +02:00
Stefan Sauer
9b459b52f6 curlbasesink: small code cleanup
Use a local var and save a local var.
2014-10-16 14:12:19 +02:00
Vivia Nikolaidou
778b1814a8 curlsmtpsink: Set CURLOPT_UPLOAD to 1 to not use VRFY and other unneeded commands
Fixes the sink with SMTP servers that disable VRFY for spam protection.

http://sourceforge.net/p/curl/bugs/1389/
2014-10-06 21:28:45 +03:00
Lihua Liu
47abcb9a6b curlsmtpsink: Email with multipart content-type should end with a final boundary
Add final boundary for each of the sending out emails from smtpsink.

https://bugzilla.gnome.org/show_bug.cgi?id=736134
2014-10-06 15:42:53 +03:00
Lihua Liu
22e09f19ed curlsmtpsink: Email with multipart content-type should end with a final boundary
Add final boundary for each of the sending out emails from smtpsink.

https://bugzilla.gnome.org/show_bug.cgi?id=736134
2014-09-25 11:16:30 +03:00
Stefan Sauer
f8f2cca0e4 curl*sink: add more logging 2014-09-25 10:14:41 +02:00
Stefan Sauer
04d271dfd3 curlbasesink: add a debug function
If gstreamer is build with logging enabled, add a debug function and output
verbose messages to the log instead of stderr.
2014-09-25 08:05:50 +02:00
Stefan Sauer
8a8d3ac351 curlhttpsink: only add content-disposition header if a filename is set
The header is optional and therefore we better omit it if we don't have a filename.
2014-09-24 22:25:55 +02:00
Stefan Sauer
a80cde8cb6 curlbasesink: don't replace specific error messages with a generic one
Only set an error if we haven't set one already.
2014-09-24 22:25:55 +02:00
Stefan Sauer
2e51ba1219 curltlssink: swap check
Lets check for NULL first, as that is the default anyway.
2014-09-24 22:25:55 +02:00
Sebastian Dröge
a7e243b32e curlsshsink: Include gst.h and other stuff before anything else 2014-07-11 21:16:26 +02:00
Sebastian Dröge
198d8dd5f1 curl: Use winsock2 instead and the GLib macro for checking if we're on Windows 2014-07-11 13:25:57 +02:00
Alexey Pavlov
365d0cfb32 ext: Include winsock.h on Windows when required
https://bugzilla.gnome.org/show_bug.cgi?id=733052
2014-07-11 13:21:21 +02:00
Sebastian Rasmussen
96c78695f9 curls?ftpsink: Fix memory leaks due to new error handling
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=732174
2014-06-24 19:05:34 +02:00
L. Sorin
5edf0add57 curlsshsink: post error on bus in element, not transfer thread
Looks like this file was missed in Bug 728960:
https://bugzilla.gnome.org/show_bug.cgi?id=728960

https://bugzilla.gnome.org/show_bug.cgi?id=730459
2014-05-21 08:36:51 +02:00
L. Sorin
9c1e66302d curlsftpsink: authenticate remote host via public key fingerprint
Expose one more libcurl option: CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.
This allows authenticating the server by the MD5 fingerprint of
the server's public key.

https://bugzilla.gnome.org/show_bug.cgi?id=723167
2014-05-20 08:58:08 +02:00
Sebastian Rasmussen
241c3acad5 curl*sink: report errors from curl when setting options
https://bugzilla.gnome.org/show_bug.cgi?id=728960
2014-04-26 10:24:24 +02:00
Sebastian Rasmussen
c75c7a9a53 curl*sink: post error on bus in element, not transfer thread
https://bugzilla.gnome.org/show_bug.cgi?id=728960
2014-04-26 10:23:24 +02:00
Sebastian Rasmussen
13f87a1db1 curlhttpsink: allow for unconditionally disabling proxying
Previously if the proxy server hostname was the empty string
curlhttpsink would never even set the libcurl option. For libcurl
however, having a proxy server hostname be the empty string means that
proxying should be disabled even if environment variables might be set.
Now with the restriction lifted, doing this is allowed.

https://bugzilla.gnome.org/show_bug.cgi?id=728960
2014-04-26 10:21:56 +02:00
Sebastian Rasmussen
da987a3219 curl*sink: fix typos
https://bugzilla.gnome.org/show_bug.cgi?id=728960
2014-04-26 10:20:33 +02:00
Sebastian Rasmussen
bdd2676a67 curl*sink: fix some gst-indent problems
https://bugzilla.gnome.org/show_bug.cgi?id=728960
2014-04-26 10:20:11 +02:00
Vincent Penquerc'h
bbda6a1ab9 curl: remove unneeded NULL check
We just checked for NULL and allocated if it was. And glib aborts
if it can't allocate, I'm told.

Coverity 1139841
2014-04-10 17:37:22 +01:00
Vincent Penquerc'h
feede7ddfa curl: remove duplicate assignment
Coverity 1197708
2014-04-10 17:33:55 +01:00
Lihua Liu
f3464e01bb curlsmtpsink: Include timezone information in mail header
https://bugzilla.gnome.org/show_bug.cgi?id=724125
2014-02-11 21:03:18 +01:00
Sebastian Dröge
d111f37f74 curl: Fix indention 2013-12-17 12:18:16 +01:00
Haridass Selvaraj
23ab7d8c49 curlftpsink: Optionally create a temporary file during FTP transfer/upload
https://bugzilla.gnome.org/show_bug.cgi?id=711620
2013-12-17 12:18:01 +01:00
L. Sorin
15717842e4 curl: curlsftpsink - new libcurl-based sink element for SFTP
Note: SFTP = SSH File Transfer Protocol
The sink acts as a client and uploads data to the SFTP server.

https://bugzilla.gnome.org/show_bug.cgi?id=709795
2013-11-01 17:20:04 +01:00
Patricia Muscalu
0d6fc0215c curlsmtpsink: removed an incorrect assert
https://bugzilla.gnome.org/show_bug.cgi?id=702036
2013-06-11 21:08:28 +02:00
Patricia Muscalu
8303561bd9 curlsmtpsink: terminate transfer thread properly
If no EOS has been sent, the curl readfunc callback will
return ABORT. The media file in that case will not be properly
finalized.

https://bugzilla.gnome.org/show_bug.cgi?id=700886
2013-05-24 23:47:50 +01:00
Sebastian Dröge
e51cd4fe2f gst: Add better support for static plugins 2013-04-15 15:59:22 +02:00
Patricia Muscalu
4202eeff7d curltlssink: set correct level of SSL for the transfer
https://bugzilla.gnome.org/show_bug.cgi?id=692010
2013-01-22 10:55:14 +00:00
Tim-Philipp Müller
9e1b75fda3 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:09:59 +00:00
Sebastian Rasmussen
1c71fd351a curlsmtpsink: add comment describing function
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=686774
2012-10-24 11:29:47 +01:00
Tim-Philipp Müller
32ba17cd0f Use gst_element_class_set_static_metadata()
where possible. Avoids some string copies. Also re-indent
some stuff. Also some indent fixes here and there.
2012-10-17 17:46:34 +01:00
Руслан Ижбулатов
2c2d6b0753 curl: fix compiler warning with setsockopt() on windows
The optval argument is of type const char * on windows.

https://bugzilla.gnome.org/show_bug.cgi?id=685065
2012-09-29 11:41:56 +01:00
Руслан Ижбулатов
75dba03688 curl: fix build on win32
https://bugzilla.gnome.org/show_bug.cgi?id=684847
2012-09-28 09:57:53 +01:00
Mark Nauwelaerts
578861abea replace gst_element_class_set_details_simple with gst_element_class_set_metadata 2012-09-14 17:27:49 +02:00
Patricia Muscalu
a7037cd0e3 curl: fixed some memory leaks in the plugin and the unit tests
https://bugzilla.gnome.org/show_bug.cgi?id=681117
https://bugzilla.gnome.org/show_bug.cgi?id=681115
2012-08-03 20:28:40 +01:00
Wim Taymans
f710f1250b curl: fix compilation
Don't use deprecated thread API
2012-05-14 09:15:55 +02:00
Sebastian Dröge
fc317b8dbb curl: Fix equality comparison with extraneous parantheses compiler warning
gstcurlhttpsink.c:411:27: error: equality comparison with extraneous parentheses
2012-05-13 15:24:52 +02:00
Sebastian Rasmussen
3f20bbdcf4 curl: new curlsmtpsink element
https://bugzilla.gnome.org/show_bug.cgi?id=653741
2012-05-12 11:59:01 +01:00
Patricia Muscalu
766dd8bb71 curl: new curlftpsink element
http://bugzilla.gnome.org/show_bug.cgi?id=653741
2012-05-12 11:53:25 +01:00
Patricia Muscalu
f139656bec curl: new curlfilesink element
https://bugzilla.gnome.org/show_bug.cgi?id=653741
2012-05-12 11:53:01 +01:00
Patricia Muscalu
ae39cbfa57 curl: refactor curlsink, rename to curlhttpsink
Split into base, tls and http classes.

https://bugzilla.gnome.org/show_bug.cgi?id=653741
2012-05-12 11:48:03 +01:00
Sebastian Dröge
cda192b3b7 gst: Update for GST_PLUGIN_DEFINE() API changes 2012-04-05 18:02:56 +02:00
Sebastian Dröge
860ccd414d Merge remote-tracking branch 'origin/0.10'
Conflicts:
	NEWS
	RELEASE
	common
	configure.ac
	docs/libs/gst-plugins-bad-libs-sections.txt
	docs/plugins/gst-plugins-bad-plugins.args
	docs/plugins/gst-plugins-bad-plugins.hierarchy
	docs/plugins/gst-plugins-bad-plugins.interfaces
	docs/plugins/inspect/plugin-adpcmdec.xml
	docs/plugins/inspect/plugin-adpcmenc.xml
	docs/plugins/inspect/plugin-assrender.xml
	docs/plugins/inspect/plugin-audiovisualizers.xml
	docs/plugins/inspect/plugin-autoconvert.xml
	docs/plugins/inspect/plugin-bayer.xml
	docs/plugins/inspect/plugin-bz2.xml
	docs/plugins/inspect/plugin-camerabin2.xml
	docs/plugins/inspect/plugin-celt.xml
	docs/plugins/inspect/plugin-dataurisrc.xml
	docs/plugins/inspect/plugin-debugutilsbad.xml
	docs/plugins/inspect/plugin-dtmf.xml
	docs/plugins/inspect/plugin-dtsdec.xml
	docs/plugins/inspect/plugin-dvbsuboverlay.xml
	docs/plugins/inspect/plugin-dvdspu.xml
	docs/plugins/inspect/plugin-faac.xml
	docs/plugins/inspect/plugin-faad.xml
	docs/plugins/inspect/plugin-gsm.xml
	docs/plugins/inspect/plugin-h264parse.xml
	docs/plugins/inspect/plugin-mms.xml
	docs/plugins/inspect/plugin-modplug.xml
	docs/plugins/inspect/plugin-mpeg2enc.xml
	docs/plugins/inspect/plugin-mpegdemux2.xml
	docs/plugins/inspect/plugin-mpegtsdemux.xml
	docs/plugins/inspect/plugin-mpegvideoparse.xml
	docs/plugins/inspect/plugin-mplex.xml
	docs/plugins/inspect/plugin-pcapparse.xml
	docs/plugins/inspect/plugin-rawparse.xml
	docs/plugins/inspect/plugin-rtpmux.xml
	docs/plugins/inspect/plugin-rtpvp8.xml
	docs/plugins/inspect/plugin-scaletempo.xml
	docs/plugins/inspect/plugin-schro.xml
	docs/plugins/inspect/plugin-sdp.xml
	docs/plugins/inspect/plugin-segmentclip.xml
	docs/plugins/inspect/plugin-shm.xml
	docs/plugins/inspect/plugin-videomaxrate.xml
	docs/plugins/inspect/plugin-videoparsersbad.xml
	docs/plugins/inspect/plugin-vp8.xml
	docs/plugins/inspect/plugin-y4mdec.xml
	ext/celt/gstceltdec.c
	ext/dts/gstdtsdec.c
	ext/modplug/gstmodplug.cc
	ext/opus/gstopusenc.c
	gst-libs/gst/video/gstbasevideocodec.c
	gst-libs/gst/video/gstbasevideocodec.h
	gst-libs/gst/video/gstbasevideodecoder.c
	gst-libs/gst/video/gstbasevideodecoder.h
	gst-libs/gst/video/gstbasevideoencoder.c
	gst-libs/gst/video/gstbasevideoencoder.h
	gst/adpcmdec/Makefile.am
	gst/audiovisualizers/gstbaseaudiovisualizer.c
	gst/h264parse/gsth264parse.c
	gst/mpegdemux/mpegtsparse.c
	gst/mpegtsdemux/mpegtsbase.c
	gst/mpegtsdemux/mpegtspacketizer.c
	gst/mpegtsdemux/mpegtsparse.c
	gst/mpegtsdemux/tsdemux.c
	gst/mpegtsdemux/tsdemux.h
	gst/mxf/mxfdemux.c
	gst/rawparse/gstaudioparse.c
	gst/videoparsers/gsth263parse.c
	gst/videoparsers/gsth264parse.c
	sys/d3dvideosink/d3dvideosink.c
	sys/decklink/gstdecklinksink.cpp
	sys/dvb/gstdvbsrc.c
	sys/shm/gstshmsrc.c
	sys/vdpau/h264/gstvdph264dec.c
	sys/vdpau/mpeg/gstvdpmpegdec.c
	tests/examples/opencv/gst_element_print_properties.c
	win32/common/config.h
2012-03-29 17:41:53 +02:00
Sebastian Dröge
4b42d5c5c6 curl: Fix 'equality comparison with extraneous parentheses' compiler warning 2012-03-06 14:51:57 +01:00
Wim Taymans
1119f6ee41 Merge branch 'master' into 0.11
Conflicts:
	ext/chromaprint/gstchromaprint.c
	ext/mpeg2enc/Makefile.am
	ext/voaacenc/gstvoaacenc.c
	gst/dvbsuboverlay/gstdvbsuboverlay.c
	gst/mpegtsdemux/mpegtsbase.c
	gst/sdp/gstsdpdemux.c
	gst/videoparsers/gsth264parse.c
	sys/d3dvideosink/d3dvideosink.c
	tests/examples/camerabin/gst-camera-perf.c
	tests/examples/camerabin/gst-camerabin-test.c
	tests/examples/camerabin2/gst-camerabin2-test.c
	tests/examples/mxf/mxfdemux-structure.c
	tests/examples/scaletempo/demo-main.c
2012-02-10 16:46:50 +01:00
Tim-Philipp Müller
f8f4620451 build: fix CFLAGS order and LIBS order
_BAD_CFLAGS should always come first, then GST_PLUGINS_BASE_CFLAGS,
then GST_BASE_CFLAGS then GST_CFLAGS. Same for libs: first plugins
base libs, then GST_BASE_LIB then GST_LIBS.
2012-02-03 00:50:33 +00:00
Vincent Penquerc'h
8147669971 plenty: fixup glib deprecations 2012-01-27 15:47:07 +00:00
Vincent Penquerc'h
7521b597f4 various: fix pad template ref leaks
https://bugzilla.gnome.org/show_bug.cgi?id=662664
2011-11-28 13:08:27 +00:00
Edward Hervey
d9a930aa25 curlsink: Fix print-related issues 2011-03-04 12:15:32 +01:00
Tim-Philipp Müller
c6d7071d93 docs: add new curl plugin and curlsink element to docs 2011-03-01 11:16:56 +00:00
Tim-Philipp Müller
eb5b3be384 curlsink: no need for a private instance structure
The entire instance structure is private anyway.
2011-03-01 10:03:07 +00:00
Tim-Philipp Müller
6f01abd85d curlsink: clean up property registration code
Fix some typos, use same style as in all other plugins, avoiding
unnecessary temporary GParamSpec variables; use G_PARAM_SPEC_STATIC_STRINGS.
2011-03-01 09:56:51 +00:00
Patricia Muscalu
16b79f6f2d curl: add libcurl-based sink element
Sink acts as a client and can connect to servers to
upload media.

https://bugzilla.gnome.org/show_bug.cgi?id=641496
2011-02-28 23:55:33 +00:00