This fixes simplification of caps with GstFractionRange structures,
for example, this caps:
video/x-raw, framerate=(fraction)5/1; video/x-raw, framerate=(fraction)[ 5/1, 30/1 ]
can now be simplified to:
video/x-raw, framerate=(fraction)[ 5/1, 30/1 ]
instead of:
video/x-raw, framerate=(fraction){ 5/1, [ 5/1, 30/1 ] }
And this:
video/x-raw, framerate=(fraction)[ 2/1, 5/1 ]; video/x-raw, framerate=(fraction)[ 5/1, 30/1 ]
can be simplified to:
video/x-raw, framerate=(fraction)[ 2/1, 30/1 ]
instead of
video/x-raw, framerate=(fraction){ [ 2/1, 5/1 ], [ 5/1, 30/1 ] }
This fixes overly-complicated GL caps set by avfvideosrc on macOS and
iOS when capturing from a webcam.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4132>
Removing a meta from a buffer means one doesn't have access to it
anymore. Instead use the already reffed composition directly.
Fixes a use-after-free in the following pipeline:
... ! vulkanupload ! timeoverlay ! vulkanoverlaycompositor ! ...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4143>
As specified in EIA/CEA-608-B section 8.4:
When closed captioning is used on line 21, field 2, it shall conform
to all of the applicable specifications and recommended practices as
defined for field 1 services with the following differences:
a) The non-printing character of the miscellaneous control-character pairs
that fall in the range of 14h, 20h to 14h, 2Fh in field 1, shall be replaced
with 15h, 20h to 15h, 2Fh when used in field 2.
b) The non-printing character of the miscellaneous control-character pairs
that fall in the range of 1Ch, 20h to 1Ch, 2Fh in field 1, shall be replaced
with 1Dh, 20h to 1Dh, 2Fh when used in field 2.
This means simply switching the "field" field in the caps isn't enough for
converting raw 608 from one field to another, some control codes also
need to be amended.
+ Adds simple test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4126>
GstBufferPool implementation was referenced for this GstD3D11PoolAllocator,
for example GstAtomicQueue, various atomic operations, and GstPoll ones.
However, such combination seems to be almost pointless
since gst_poll_{read,write}_control() takes mutex and also
GstPoll uses Win32 event handle internally.
Use simple SRWLOCK and CONDITION_VARIABLE instead, and don't make things
complicated/inefficient.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2887>
When we run Cheese 41.1 on our imx platform, Cheese preview freeze
at first frame.
During pipeline state changing from NULL to PLAYING, if there are
both elements that state change asynchronously and state change
with no preroll in the bin, the element inside may send ASYNC_DONE
message to it, while the bin's pending state is VOID_PENDING.
In this case, the bin will not post ASYNC_DONE message to parent
bin, which makes parent bin thinks that there are still elements
in it that haven't completed state changing, causing the pipeline
freeze in an intermediate state.
This commit modifies the bin_handle_async_done() function. When the
bin, whose pending state is VOIDING_PENDING, receives the ASYNC_DONE
message, it will also post this message to its parent bin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3490>
A flush is resetting or not depending on the reset_time argument in the
FLUSH_STOP event is set.
Resetting flushes reset the running time to zero and clear any existing
segment. These are the kind of flushes used by flushing seeks, and by far the
most common. Non-resetting flushes are much more niche, used for instance for
quality changes in adaptivedemux2 and MediaSource Extensions in WebKit.
A key difference between the seek use case and the quality change use case is
that the latter is much more removed from the player. Seeks generally occur
because an user request it, whereas quality changes can be automatic.
Currently, there are three notable cases where position queries fail:
(a) before pre-roll, as there is no segment yet. This is one is understandable,
as for at least some time before pre-roll, we cannot know if a media stream
would start at 0 or any other position, or the duration of the stream for that
matter.
(b) after a resetting flush caused by a seek. This kind of flush resets the
segment, so it's not surprising position queries fail. This is inconvenient for
applications, as it means they always need to handle position reporting (e.g.
in UI) separately every time they request a seek, e.g. by caching the seek
target and using it when the position query fail. I'm not fond of this
behavior, as it's unintuitive and makes GStreamer harder to use, but at this
point could be difficult to change and it's not within the scope of this
proposal.
(c) after a non-resetting flush, e.g. caused by a quality change. The segment
is not reset in this case. Position queries work until a FLUSH_STOP is sent.
Querying position after a FLUSH_START but before a FLUSH_STOP works, and
returns the position the sink was at the moment the FLUSH_START was received.
**This in fact the only reliable way (short of adding probes to the sink
element) to get this position**, as FLUSH_START receival is asynchronous with
playback.
In the case (c), as of currently, position queries fail once the FLUSH_STOP is
received. But unlike in (b), the application has no position to fall back to,
as the FLUSH_START was initiated by elements inside the pipeline that are in a
lower layer of abstraction. Specific applications that have control of both the
player and the internal element doing the flushing -- such as WebKit -- can
still work around this problem through layer violations (lucky!), but this
still puts in question this behavior in GStreamer.
This patch fixes this case by amending the position query handler of basesink,
which was previously erroneously returning early with "wrong state", even
though the flush occurs in PAUSED or PLAYING.
A unit test checking this behavior has also been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3471>
The code wants to prepend one byte to every byte pair. It correctly did
so by working backwards pair-wise, but then didn't work backwards
instead of each individual pair / future triplet, overwriting
information before attempting to read it.
The code also failed to update the len pointer after prepending.
This fixes both issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4100>
The abort() method of SourceBuffer in Media Source Extensions is
expected to flush the demuxer and discard the current fragment,
if any. The configuration of tracks, if any, should be preserved.
qtdemux has different behavior for flush events depending on the
context.
This patch activates the intended behaviour only for streams of the
VARIANT_MSE_BYTESTREAM type, conformant to the ISO BMFF Bytestream
specification[1]. This flush behaviour is the same as the one
already in use for adaptivedemux sources.
[1] https://www.w3.org/TR/mse-byte-stream-format-isobmff/https://bugzilla.gnome.org/show_bug.cgi?id=795424
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4101>
Removing sockets from the epoll for cancellation is unreliable and might
not be thread-safe. Rather, have SRT watch a FD from the cancellable if
available. Keep the cancellable cancelled while we're not open.
Use the regular single-socket `sock` and `poll_id` fields for the
listening thread instead of duplicating them.
Before polling we need to check the socket state. SRT closes broken
sockets by itself and when the epoll contains our cancellation FD it can
no longer be empty, which was an error before.
Treat more failures in the read and write operations as an opportunity
to try a reconnect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4087>
Seems that SRT can remove the socket from the poll by itself when the
connection gets closed. Consider this an error condition and ensure we
only "abort successfully" when we're actually trying to unlock.
Needs more investigation but this is enough to prevent the element from
getting stuck not reporting an error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4087>
