Fix formts for various GST_DEBUG et al. invocations. More precisely,
make size_t arguments use the %zu format specifier accordingly; force
XID formats to be a 32-bit unsigned integer; and fix the format used
for gst_vaapi_create_surface_with_format() error cases since we have
been using strings nowadays.
The following helper functions are no longer used, thus are removed:
- gst_vaapi_video_format_from_structure()
- gst_vaapi_video_format_from_caps()
- gst_vaapi_video_format_to_caps()
Replace gst_vaapi_display_get_{decode,encode}_caps() APIs with more
more convenient APIs that return an array of GstVaapiProfile instead
of GstCaps: gst_vaapi_display_get_{decode,encode}_profiles().
Replace gst_vaapi_display_get_{image,subpicture}_caps() APIs, that
returned GstCaps, with more convenient APIs that return an array of
GstVideoFormat: gst_vaapi_display_get_{image,subpicture}_formats().
Fix display creation code to check that any display obtained from a
neighbour actually has the type we expect. Note: if display type is
set to "any", we can then accept any VA display type.
The GLTextureUploadMeta implementation assumed that for each upload()
sequence, the supplied texture id is always the same as the one that
was previously cached into the underlying GstVaapiTexture. Cope with
any texture id change the expense to recreate the underlying VA/GLX
resources.
https://bugzilla.gnome.org/show_bug.cgi?id=719643
Improve robustness when some expected packets where not received yet
or that were not correctly decoded. For example, don't try to decode
a picture if there was no valid frame headers parsed so far.
https://bugs.freedesktop.org/show_bug.cgi?id=57902
Conformance test Base_Ext_Main_profiles/BA3_SVA_C.264 complys with
extended profile specifications. However, the SPS header has the
constraint_set1_flag syntax element set to 1. This means that, if
a Main profile compliant decoder is available, then it should be
able to decode this stream.
This changes makes it possible to fall-back from Extended profile
to Main profile if constraint_set1_flag is set to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=720190
Recognize streams marked as conforming to the "Constrained Baseline
Profile". If VA driver supports that as is, fine. Otherwise, fallback
to baseline, main or high profile.
Constrained Baseline Profile conveys coding tools that are common
to baseline profile and main profile.
https://bugzilla.gnome.org/show_bug.cgi?id=719947
[Added fallbacks to main and high profiles]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The GStreamer codecparser layer now parses the scaling lists in zigzag
scan order, as expected, so that to match the original bitstream layout
and specification. However, further convert the scaling lists into
raster scan order to fit the existing practice in most VA drivers.
https://bugzilla.gnome.org/show_bug.cgi?id=706406
- gst_vaapi_utils_h264_get_level():
Returns GstVaapiLevelH264 from H.264 level_idc value
- gst_vaapi_utils_h264_get_level_idc():
Returns H.264 level_idc value from GstVaapiLevelH264
- gst_vaapi_utils_h264_get_level_limits():
Returns level limits as specified in Table A-1 of the H.264 standard
- gst_vaapi_utils_h264_get_level_limits_table():
Returns the Table A-1 specification
* Profiles:
- gst_vaapi_utils_h264_get_profile():
Returns GstVaapiProfile from H.264 profile_idc value
- gst_vaapi_utils_h264_get_profile_idc():
Returns H.264 profile_idc value from GstVaapiProfile
* Chroma formats:
- gst_vaapi_utils_h264_get_chroma_type():
Returns GstVaapiChromaType from H.264 chroma_format_idc value
- gst_vaapi_utils_h264_get_chroma_format_idc():
Returns H.264 chroma_format_idc value from GstVaapiChromaType
The previous fix was only valid to express the maximum size of the
macroblock layer, i.e. without any headers. Now, also account for
the slice headers and top picture header, but also any other header
we might stuff into the VA coded buffer, e.g. sequence headers.
Fix coded buffer size for each codec. A generic issue was that the
number of macroblocks was incorrectly computed. The second issue was
specific to MPEG-2 were the max number of bits per macroblock, and
as defined by the standard, was incorrectly mapped to the (lower)
H.264 requirement. i.e. 4608 bits vs. 3200 bits limit.
Change get_context_info() into a set_context_info() function that
initializes common defaults into the base class, thus allowing the
subclasses to specialize the context info further on.
The set_context_info() hook is also the location where additional
context specific data could be initialized. At this point, we are
guaranteed to have valid video resolution size and framerate. i.e.
gst_vaapi_encoder_set_format() was called beforehand.
Clean public APIs up so that to better align with the decoder APIs.
Most importantly, gst_vaapi_encoder_get_buffer() is changed to only
return the VA coded buffer proxy. Also provide useful documentation
for the public APIs.
Kill GstVaapiEncoderSyncPic objects that are internally and temporarily
allocated. Rather, associate a GstVaapiEncPicture to a coded buffer
through GstVaapiCodedBufferProxy user-data facility.
Besides, use a GAsyncQueue to maintain a thread-safe queue object of
coded buffers.
Partial fix for the following report:
https://bugzilla.gnome.org/show_bug.cgi?id=719530
Fix the GstVaapiEncoderClass parent class type. Make sure to validate
subclass hooks as early as possible, i.e. in gst_vaapi_encoder_init(),
thus avoiding useless run-time checks. Also simplify the subclass
initialization process to be less error prone.
Refactor the GstVaapiCodedBuffer APIs so that to more clearly separate
public and private interfaces. Besides, the map/unmap APIs should not
be exposed as is but appropriate accessors should be provided instead.
* GstVaapiCodedBuffer: VA coded buffer abstraction
- gst_vaapi_coded_buffer_get_size(): get coded buffer size.
- gst_vaapi_coded_buffer_copy_into(): copy coded buffer into GstBuffer
* GstVaapiCodedBufferPool: pool of VA coded buffer objects
- gst_vaapi_coded_buffer_pool_new(): create a pool of coded buffers of
the specified max size, and bound to the supplied encoder
* GstVaapiCodedBufferProxy: pool-allocated VA coded buffer object proxy
- gst_vaapi_coded_buffer_proxy_new_from_pool(): create coded buf from pool
- gst_vaapi_coded_buffer_proxy_get_buffer(): get underlying coded buffer
- gst_vaapi_coded_buffer_proxy_get_buffer_size(): get coded buffer size
Rationale: more optimized transfer functions might be provided in the
future, thus rendering the map/unmap mechanism obsolete or sub-optimal.
https://bugzilla.gnome.org/show_bug.cgi?id=719775
Add gst_vaapi_surface_proxy_copy() function that creates a new surface
proxy with the same information from the parent proxy, except that the
user-defined destroy notify function is not copied over.
The underlying VA surface is pushed back to the video pool only when
the last reference to the parent surface proxy is released.
Optimize gst_vaapiencode_handle_frame() to avoid extra memory allocation,
and in particular the GstVaapiEncObjUserData object. i.e. directly use
the VA surface proxy from the source buffer. This also makes the user
data attached to the GstVideoCodecFrame more consistent between both
the decoder and encoder plug-in elements.
Add gst_buffer_new_allocate() and gst_buffer_fill() implementations.
Fix gst_buffer_new_wrapped_full() implementation to handle the destroy
notify function.
GStreamer 0.10.36 is the latest and ultimate version to be released
from the GStreamer 0.10 branch. i.e. no further releases are to be
made. So, we can safely enable the built-in videoutils replacement
now that they are in sync with the 0.10 branch.
Add initial API for video encoding: only basic interfaces and small
encoder objects are implemented so far.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
GstBitWriter provides a bit writer that can write any number of bits
to a pre-allocated memory buffer. Helper functions are also provided
to write any number of bits from 8, 16, 32 and 64 bit variables.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Extend GstVaapiContextInfo structure to hold the desired rate control
mode for encoding purposes. For decoding purposes, this field is not
used and it is initialized to GST_VAAPI_RATECONTROL_NONE.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add GstVaapiRateControl types and GType values in view to supporting
rate controls for encoding. This is meant to be used for instance in
GstVaapiContext.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This library is using symbols that don't exist in GStreamer 0.10 so
it needs to link to built-in implementation (libgstvaapi-videoutils).
https://bugzilla.gnome.org/show_bug.cgi?id=712282
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Destroy VPP output surface pool on exit. Also avoid a possible crash
in double-free situation caused by insufficiently reference counted
array of formats returned during initialization.
The <gst/vaapi/gstvaapicontext.h> header was removed from the public
set of APIs. So, don't make public headers (gstvaapidecoder.h) depend
on private files.
Add gst_vaapi_fitler_set_deinterlacing_references() API to submit the
list of surfaces used for forward or backward reference in advanced
deinterlacing mode, e.g. Motion-Adaptive, Motion-Compensated.
The list of surfaces used as deinterlacing references shall be live
until the next call to gst_vaapi_filter_process().
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix deinterlacing flags to make more sense. The TFF (top-field-first)
flag is meant to specify the organization of reference frames used in
advanced deinterlacing modes. Introduce the more explicit flag TOPFIELD
to specify that the top-field of the supplied input surface is to be
used for deinterlacing. Conversely, if not set, this means that the
bottom field of the supplied input surface will be used instead.
Add a couple of helper functions:
- gst_vaapi_filter_has_operation(): checks whether the VA driver
advertises support for the supplied operation ;
- gst_vaapi_filter_use_operation(): checks whether the supplied
operation was already enabled to its non-default value.
The user-defined destroy notify function is meant to be called only when
the surface proxy was fully released, i.e. once it actually released the
VA surface back to the underlying pool.
Fix GstVaapiPicture, GstVaapiSlice and GstVaapiSurfaceProxy initialization
sequences to have the expected default values set beforehand in case of an
error raising up further during creation. i.e. make it possible to cleanly
destroy those partially initialized objects.
https://bugzilla.gnome.org/show_bug.cgi?id=707108
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix ensure_operations() to release the VPP operations array if non
NULL, prior to returning to the caller. The former function was also
renamed to a more meaningful get_operations() since the caller owns
the returned array that needs to be released.
Fix first-time operation lookup through find_operation() if the set
of supported operations was not initially determined through the
gst_vaapi_filter_get_operations() helper function.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix intiialization of GstVaapiFilterOpData for colorbalance related
operations. In particular, fill in the va_subtype field accordingly.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
VASurfaceAttrib and VAProcFilterParameterBufferType are symbols
that need to be guarded for libva 0.34 and 0.33, respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=709102
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix calculation of MCU count for image sizes that are not a multiple
of 8 pixels in either dimension, but also for non-common sampling
factors like 4:2:2 in non-interleaved mode.
Add support for images with multiple scans per frame. The Huffman table
can be updated before SOS, and thus possibly requiring multiple uploads
of Huffman tables to the VA driver. So, the latter must be able to cope
with multiple VA buffers of type 'huffman-table' and with the correct
sequential order.
Improve robustness when some expected packets where not received yet
or that were not correctly decoded. For example, don't try to decode
a picture if there was no valid frame headers.
Improve debugging and error messages. Rename a few variables to fit the
existing naming conventions. Change some fatal asserts to non-fatal
error codes.
Split the input buffer data into decoder units that represent a JPEG
segment. Handle scan decoder unit specifically so that it can include
both the scan header (SOS) but also any other ECS or RSTi segment.
That way, we parse the input buffer stream only once at the gst-vaapi
level instead of (i) in gst_vaapi_decoder_jpeg_parse() to split the
stream into frames SOI .. EOI and (ii) in decode_buffer() to further
determine segment boundaries and decode them.
In practice, this is a +15 to +25% performance improvement.
Fix decode_buffer() function to gracefully skip comment (COM) segments.
This fixes decoding of streams generated by certain cameras, e.g. like
the Logitech Pro C920.
https://bugzilla.gnome.org/show_bug.cgi?id=708208
Signed-off-by: Junfeng Xu <jun.feng.xu@intel.com>
Look for the exact image bounds characterised by the <SOI> and <EOI>
markers. Use the gst_jpeg_parse() codec parser utility function to
optimize the lookup for the next marker segment.
https://bugzilla.gnome.org/show_bug.cgi?id=707447
Fix calculation of the offset to the next marker segment since the
correction of the codecparser part to match the API specification.
i.e. the GstJpegMarkerSegment.size field represents the size in bytes
of the segment minus any marker prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=707447
Signed-off-by: Junfeng Xu <jun.feng.xu@intel.com>
Fix detection of VA/JPEG decoding API with non-standard libva packages.
More precisely, some packages were shipping with a <va/va.h> header that
did not include <va/va_dec_jpeg.h>.
https://bugzilla.gnome.org/show_bug.cgi?id=706055
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
As a last resort, if video processing capabilities (VPP) are not available,
or they did not produce anything conclusive enough, then try to fallback to
the original rendering code path whereby the whole VA surface is rendered
as is, no matter of video cropping or deinterlacing requests.
Note: under those conditions, the visual outcome won't be correct but at
least, something gets displayed instead of bailing out.
Try to use VA/VPP processing capabilities to handle video cropping and
additional rendering flags that may not be directly supported by the
underlying hardware when exposing a suitable Wayland buffer for the
supplied VA surface. e.g. deinterlacing, different color primaries than
BT.601, etc.
Update the frame redraw infrastructure with a new FrameState stucture
holds all the necessary information used to display the next pending
surface.
While we are at it, delay the sync operation down to when it is actually
needed. That way, we keep performing additional tasks meanwhile.
Disable video cropping in MPEG-2 codec because it is partially implemented
and actually because nobody implements it that way, and the standard spec
does not specify the display process either anyway.
Most notably, there are two possible use cases for sequence_display_extension()
horizontal_display_size & vertical_display_size: (i) guesstimating the
pixel-aspect-ratio, or (ii) implement some kind of span & scan process
in conjunction with picture_display_extension() information.
https://bugzilla.gnome.org/show_bug.cgi?id=704848
This fixes the following issue:
CC libgstvaapi_0.10_la-gstvaapidecoder_mpeg4.lo
gstvaapidecoder_mpeg4.c:113: error: redefinition of typedef
'GstVaapiDecoderMpeg4Class'
gstvaapidecoder_mpeg4.c:44: note: previous declaration of
'GstVaapiDecoderMpeg4Class' was here
make[5]: *** [libgstvaapi_0.10_la-gstvaapidecoder_mpeg4.lo] Error 1
make[5]: Leaving directory
`/builddir/build/BUILD/gstreamer-vaapi-0.5.5.1/gst-libs/gst/vaapi'
https://bugzilla.gnome.org/show_bug.cgi?id=705148
Add basic deinterlacing support, i.e. bob-deinterlacing whereby only
the selected field from the input surface is kept for the target surface.
Setting gst_vaapi_filter_set_deinterlacing() method argument to
GST_VAAPI_DEINTERLACE_METHOD_NONE means to disable deinterlacing.
Also move GstVaapiDeinterlaceMethod definition from vaapipostproc plug-in
to libgstvaapi core library.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add ProcAmp (color balance) adjustments for hue, saturation, brightness
and contrast. The respective range for each filter shall be the same as
for the VA display attributes.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Sharpening is configured with a float value. The supported range is
-1.0 .. 1.0 with 0.0 being the default, and that means no sharpening
operation at all.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Noise reduction is configured with a float value. The supported range
is 0.0 .. 1.0 with 0.0 being the default, and that means no denoise
operation at all.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add helper functions to ensure an operation VA buffer is allocated to
the right size; that filter caps get parsed and assigned to the right
operation too; and that float parameters are correctly scaled to fit
the reported range from the VA driver.
Add gst_vaapi_video_format_from_string() helper function to convert from
a video format string representation to a suitable GstVideoFormat. This
is just an alias to gst_video_format_from_string() for GStreamer 1.0.x
builds, and a proper iteration over all GstVideoFormat string representations
otherwise for earlier GStreamer 0.10.x builds.
Add helper functions to describe GstVaapiPoint and GstVaapiRectangle
structures as a standard GType. This could be useful to have them
described as a GValue later on.
Don't expose GstVaapiContext APIs and make them totally private to
libgstvaapi core library. That API would also tend to disappear in
a future revision. Likewise, don't expose GstVaapiDisplayCache API
but keep symbols visible so that the various render backends could
share a common display cache implementation in libgstvaapi.
Try to clean-up the documentation from any stale entry too.
Don't expose functions that reference a GstVaapiImageRaw, those are
meant to be internal only for implementing subpictures sync. Also add
a few private definitions to avoid functions calls for retrieving
image size and format information.
Use hardware accelerated XRenderComposite() function, from the RENDER
extension, to blit a pixmap to screen. Besides, this can also support
cropping and scaling.
Implement the new render-to-pixmap API. The only supported pixmap format
that will work is xRGB, with native byte ordering. Others might work but
they were not tested.
Add API to transfer VA urfaces to native pixmaps. Also add an API to
render a native pixmap, for completeness. In general, rendering to
pixmap would only be useful to certain VA drivers and use cases on
X11 display servers. e.g. GLX_EXT_texture_from_pixmap (TFP) handled
in an upper layer.
Mark dummy pictures as output already so that we don't try to submit
them to the upper layer since this is purely internal / temporary
picture for helping the decoder.
Once the picture was output, it is no longer necessary to keep an extra
reference to the underlying GstVideoCodecFrame. So, we can release it
earlier, and maybe subsequently release the associate surface proxy
earlier.
Fix new internal video format API, based on GstVideoFormat, to not
clobber with system symbols. So replace the gst_video_format_* prefix
with gst_vaapi_video_format_ prefix, even if the format type remains
GstVideoFormat.
Fix memory leak when processing interlaced pictures and that occurs
because the first field, represented as a GstVideoCodecFrame, never
gets released. i.e. when the picture is completed, this is generally
the case when the second field is successfully decoded, we need to
propagate the GstVideoCodecFrame of the first field to the original
GstVideoDecoder so that it could reclaim memory.
Otherwise, we keep accumulating the first fields into GstVideoDecoder
private frames list until the end-of-stream is reached. The frames
are eventually released there, but too late, i.e. too much memory
may have been consumed.
https://bugzilla.gnome.org/show_bug.cgi?id=701257
The queue of free objects to used was deallocated with g_queue_free_full().
However, this convenience function shall only be used if the original queue
was allocated with g_queue_new(). This caused memory corruption, eventually
leading to a crash.
The correct solution is to pair the g_queue_init() with the corresponding
g_queue_clear(), while iterating over all free objects to deallocate them.
Fix creation of surface pool objects to honour explicit pixel format
specification. If this operation is not supported, then fallback to
the older interface with chroma format.
If a VA surface was allocated with the chroma-format interface, try to
determine the underlying pixel format on gst_vaapi_surface_get_format(),
or return GST_VIDEO_FORMAT_ENCODED if this is not a supported operation.
Make it possible to create VA surfaces with a specific pixel format.
This is a new capability brought in by VA-API >= 0.34.0. If that
capability is not built-in (e.g. using VA-API < 0.34.0), then
gst_vaapi_surface_new_with_format() will return NULL.
Add gst_video_format_get_chroma_type() helper function to determine
the GstVaapiChromaType from a standard GStreamer video format. It is
possible to reconstruct that from GstVideoFormatInfo but it is much
simpler (and faster?) to use the local GstVideoFormatMap table.
Add new chroma formats available with VA-API >= 0.34.0. In particular,
this includes "RGB" chroma formats, and more YUV subsampled formats.
Also add a new from_GstVaapiChromaType() helper function to convert
libgstvaapi chroma type to VA chroma format.
Make gst_vaapi_image_pool_new() succeed, and thus returning a valid
image pool object, only if the underlying VA display does support the
requested VA image format.
Get rid of GstCaps to create surface/image pool, and use GstVideoInfo
structures instead. Those are smaller, and allows for streamlining
libgstvaapi more.
Add new video format mappings to VA image formats:
- YUV: packed YUV (YUY2, UYVY), grayscale (Y800) ;
- RGB: 32-bit RGB without alpha channel (XRGB, XBGR, RGBX, BGRX).
Fix debug message string with image format expressed with GstVideoFormat
instead of the obsolete format that turned out to be a fourcc.
This is a regression from git commit e61c5fc.
In particular, use gst_video_info_from_caps() helper function in VA image
for implementating gst_vaapi_image_get_buffer() [vaapidownload] and
gst_vaapi_image_update_from_buffer() [subpictures] in GStreamer 0.10 builds.
Drop GstVaapiImageFormat helpers since everything was moved to the new
GstVideoFormat based API. Don't bother with backwards compatibility and
just bump the library major version afterwards.
If the stream has a sequence_display_extenion, then attach the
display_horizontal/display_vertical dimension as the cropping
rectangle width/height to the GstVaapiPicture.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
If the Advanced profile has display_extension fields, then set the display
width/height dimension as cropping rectangle to the GstVaapiPicture.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
If the encoded stream has the frame_cropping_flag set, then associate
the cropping rectangle to GstVaapiPicture.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Make it possible associate an empty cropping rectangle to the surface
proxy, thus resetting any cropping rectangle that was previously set.
This allows for returning plain NULL when no cropping rectangle was
initially set up to the surface proxy, or if it was reset to defaults.
Add helper macros to retrieve the VA surface information like size
(width, height) or chroma type. This is a micro-optimization to avoid
useless function calls and NULL pointer re-checks in internal routines.
Add gst_vaapi_picture_set_crop_rect() helper function to copy the video
cropping information from raw bitstreams to each picture being decoded.
Also add helper function to surface proxy to propagate that information
outside of libgstvaapi. e.g. plug-in elements or standalone applications.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The MPEG-2 standard specifies (6.3.7) that all quantisation matrices
shall be reset to their default values when a Sequence_Header() is
decoded.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Break the circular references between GstVaapiContext and its children
GstVaapiSurfaces. Since the VA surfaces held an extra reference to the
context, which holds a reference to its VA surfaces, then none of those
were released.
How does this impact support for subpictures?
The only situation when the parent context needs to disappear is when
it is replaced with another one because of a resolution change in the
video stream for instance, or a normal destroy. In this case, it does
not really matter to apply subpictures to the peer surfaces since they
are either gone, or those that are left in the pipe can probably bear
a reinstantiation of the subpictures for it.
So, parent_context is set to NULL when the parent context is destroyed,
other VA surfaces can still get subpictures attached to them, individually
not as a whole. i.e. subpictures for surface S1 will be created from
active composition buffers and associated to S1, subpictures for S2 will
be created from the next active composition buffers, etc. We don't try
to cache the subpictures in those cases (pending surfaces until EOS
is reached, or pending surfaces until new surfaces matching new VA context
get to be used instead).
Make sure to create the GLX context once the window object has completed
its creation. Since gl_resize() relies on the newly created window size,
then we cannot simply overload the GstVaapiWindowClass::create() hook.
So, we just call into gst_vaapi_window_glx_ensure_context() once the
window object is created in the gst_vaapi_window_glx_new*() functions.
Make it possible to add extra an extra filter to most of display cache
lookup functions so that the GstVaapiDisplay instance can really match
a compatible and existing display by type, instead of relying on extra
string tags (e.g. "X11:" prefix, etc.).
Drop obsolete GST_VAAPI_IS_xxx() helper macros since we are no longer
deriving from GObject and so those were only checking for whether the
argument was NULL or not. This is now irrelevant, and even confusing
to some extent, because we no longer have type checking.
Note: this incurs more type checking (review) but the libgstvaapi is
rather small, so this is manageable.
Make GstVaapiID a gsize instead of guessing an underlying integer large
enough to hold all bits of a pointer. Also drop GST_VAAPI_ID_NONE since
this is plain zero and that it is no longer passed as varargs.
Port GstVaapiDecoder and GstVaapiDecoder{MPEG2,MPEG4,JPEG,H264,VC1} to
GstVaapiMiniObject. Add gst_vaapi_decoder_set_codec_state_changed_func()
helper function to let the user add a callback to a function triggered
whenever the codec state (e.g. caps) changes.
Port GstVaapiVideoPool, GstVaapiSurfacePool and GstVaapiImagePool to
GstVaapiMiniObject. Drop gst_vaapi_video_pool_get_caps() since it was
no longer used for a long time. Make object allocators static, i.e.
local to the shared library.
Drop support for user-defined data since this capability was not used
so far and GstVaapiMiniObject represents the smallest reference counted
object type. Add missing GST_VAAPI_MINI_OBJECT_CLASS() helper macro.
Besides, since GstVaapiMiniObject is a libgstvaapi internal object, it
is also possible to further simplify the layout of the object. i.e. merge
GstVaapiMiniObjectBase into GstVaapiMiniObject.
Propagate the picture size from the bitstream to the GstVaapiDecoder,
and subsequent user who installed a signal on notify::caps. This fixes
decoding of TS streams when the demuxer failed to extract the required
information.
Add gst_vaapi_decoder_get_frame_with_timeout() helper function that will
wait for a frame to be decoded, until the specified timeout in microseconds,
prior to returning to the caller.
This is a fix to performance regression from 851cc0, whereby the vaapidecode
loop executed on the srcpad task was called to often, thus starving all CPU
resources.
Rework GstVideoDecoder::handle_frame() to decode the current frame,
while possibly waiting for a free surface, and separately submit all
decoded frames from a task. This makes it possible to pop and render
decoded frames as soon as possible.
Add support for interlaced streams with GStreamer 1.0 too. Basically,
this enables vaapipostproc, though it is not auto-plugged yet. We also
make sure to reply to CAPS queries, and happily handle CAPS events.
Fix support for interlaced contents with GStreamer 0.10. In particular,
propagate GstVaapiSurfaceProxy frame flags to GstVideoCodecFrame flags
correctly.
This is a regression from commit 87e5717.
