Keep an extra write ref on the control socket. This ensures that we
avoid a read/write on the socket when going from non-empty->empty->not-empty.
We remove the write ref only when we actually are empty and we need to
wait for flushing or a new buffer.
This makes the bufferpool benchmark about 30% faster than the pure
malloc implementation.
This way we make sure that a) the lock is always taken when checking
the cookie and calling the iterator's next functions and b) it is
not taken while calling any of the iterator filter functions.
https://bugzilla.gnome.org/show_bug.cgi?id=711138
events_foreach adds an extra ref when giving the event to the
user function. In case it was unrefed by the user, this extra ref
disappeared, but events_foreach still should unref again to
lose its own ref before removing the event from the array.
https://bugzilla.gnome.org/show_bug.cgi?id=722467
Make this work again:
audiotestsrc ! tee name=t t.src_0 ! queue ! fakesink t.src_1 ! queue ! fakesink
and this fail again:
audiotestsrc ! tee name=t t.src_1 ! queue ! fakesink t.src_0 ! queue ! fakesink
as tee just counts itself and does not care about the pad names we request
from it.
This allows blocking a pad, add a new blocking probe, removing
the first probe and then having the second probe called. Which
could then decide that data-flow should actually continue
instead of blocking now.
https://bugzilla.gnome.org/show_bug.cgi?id=721289
Also only check the data types for non-IDLE probes. When we
are idle, we have no data type obviously.
Previously we were calling IDLE probes during data flow whenever
a non-blocking probe would be called. The pad was usually not idle
at that time.
Checking twice the lower bound is great (you never know, it might change
between the two calls by someone using emacs butterfly-mode), but it's a bit
more useful to check the higher bound are also identical.
Detected by Coverity
If a category with the same name is found when creating a new
one, the found category is returned instead of an invalid pointer.
Fixes issue with gst-vaapi (which uses an internal copy of the
codec parsers) caused by commit ccba9130.
https://bugzilla.gnome.org/show_bug.cgi?id=720036
Make a new flag on the pad that tweaks the default behaviour of the
accept-caps function. By default it will check for a subset of the
query-caps result but this is not always desirable. The query-caps
result contains all the constraints to make a good caps decision
upstream but sometimes, like for parsers, not all the constrained caps
fields are known upstream and then a subset check would fail. Switching
to an intersection makes this work again.
See https://bugzilla.gnome.org/show_bug.cgi?id=705024https://bugzilla.gnome.org/show_bug.cgi?id=677401
* add many missing declarations to sections
* GstController has been removed, update docs
* skip GstIndex when generating documentation
* rephrase so gtkdoc doesn't imagine return value
* add missing argument description for gst_context_new()
* document GstOutputSelectorPadNegotiationMode and move to header-file
https://bugzilla.gnome.org/show_bug.cgi?id=719614
* fix typo GstBufferFlag -> GstBufferFlags
* fix typo GstFeatures -> GstCapsFeatures
* fix typo GstAllocatorParams -> GstAllocationParams
* fix typo GstContrlSources -> GstControlSource
* do not refer to gstcheck as an object
* make references gtk_init() and tcase_set_timeout() not be references
* gst_element_get_pad() renamed gst_element_get_static_pad()
* gst_clock_id_wait_async_full() renamed gst_clock_id_wait_async()
* _drop_element() is really gst_queue_array_drop_element()
* gst_pad_accept_caps() was removed, do not refer to it
* separate GST_META_TAG_MEMORY_STR declaration from description
* do not describe removed gst_collect_pads_collect()
* correctly link to GstElementClass' virtual set_context()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=719614
Older versions of flex (before 2.5.36) don't add the prototype, so it must
be added manually. We can't check by the version number, because Debian/Ubuntu
patched it into their 2.5.35 at some point.
This reverts commit 8162a583a4.
Automatically copying the sticky events makes it impossible for apps
and elements to filter the events with event probes. This causes
regressions (See #719437). The best option is to let the app/element
copy and filter the events themselves after the ghostpad target is
set.
Update the sticky events on SRC ghostpads when retargeting. This ensures
that the ghostpad has the exect same sticky events as the target pad. We
don't want to do this for SINK ghostpads, they got the events from
downstream and we don't want to overwrite them with the target pad
events.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707621
gstutils.c:3659:41: error: format string is not a string literal
[-Werror,-Wformat-nonliteral]
gchar *expanded = g_strdup_vprintf (stream_id, var_args);
https://bugzilla.gnome.org/show_bug.cgi?id=710621
gst_parse_launchv, gst_parse_launchv_full and gst_parse_launch_full
all return floating refs, the same as gst_parse_launch, which just
calls gst_parse_launch_full internally anyway.
Add a unit test assertion to check it's true.
Spotted by nemequ on IRC.
Wrap caps strings so that it can handle serialization and deserialization
of caps inside caps. Otherwise the values from the internal caps are parsed
as if they were from the upper one
https://bugzilla.gnome.org/show_bug.cgi?id=708772
It was unintuitive that GstContext was actually a list of different
contexts. GstContext now is only a type string and a structure to
contain the actual context.
Non-persistent contexts are removed when elements go back
to NULL state, persistent contexts are not. Applications
most likely want to set persistent contexts.
Since the default number of max unused threads in GThreadPool has been
changed from 0 to 2 it needs to be set to 0 to stop all threads or
valgrind will report them as memory leaks.
This makes gst_parse_bin_from_description() return an element instead of
a bin if there's only one element. Also changed gstparse.c to use this,
so gst-launch won't create superfluous bins.
https://bugzilla.gnome.org/show_bug.cgi?id=703405
The current documentation is controverse, while it states that the
returned value is valid only while the query is is valid, which presumes
a 'transfer none' policy. But the tooltip for the 'out' annotation
states the default is 'transfer-full'.
Add the missing 'transfer none' annotations to fix this.
Tweak the documentation slightly to clarify that the estimated-total in
a a Buffering query the total remaining time of a download, not the
total time for the complete download. Also indicate the unit used.
https://bugzilla.gnome.org/show_bug.cgi?id=704934
If all stream-start messages had a group id (for backwards compatibility),
we only consider a stream started if all had the same group id.
In 2.0 we should make the group id mandatory.
All streams that have the same group id are supposed to be played
together, i.e. all streams inside a container file should have the
same group id but different stream ids. The group id should change
each time the stream is started, resulting in different group ids
each time a file is played for example.
This makes sure that no bin misses the clock-lost messages, independent
of the state, and could return an old, non-working clock from
gst_bin_provide_clock_func().
https://bugzilla.gnome.org/show_bug.cgi?id=701997
Fixes compiler warnings such as
gstallocator.c:61:8: error: conflicting types for 'gst_memory_alignment'
../gst/gstallocator.h:52:18: note: previous declaration of 'gst_memory_alignment' was here
Renegotiation and reconfiguration will fail because all queries
and events won't be accepted by the pad if it's flushing. In the
best case this just causes unneeded work and spurious warnings in
the debug logs, in the worst case it causes elements to fail completely.
When appending/prepending tags, avoid re-creating (and copying) lists if we already
have one and instead just append/prepend the GValue to the list.
https://bugzilla.gnome.org/show_bug.cgi?id=702545
Before this patch gst_init would intercept --help, causing for example
cheese's --help to look like this:
[hans@shalem cheese]$ cheese --help
Usage:
cheese [OPTION...] - GStreamer initialization
Help Options:
-h, --help Show help options
--help-all Show all help options
--help-gst Show GStreamer Options
gst_init is the only gfoo_init function which does this.
https://bugzilla.gnome.org/show_bug.cgi?id=702089
API: gst_value_array_append_and_take_value
API: gst_value_list_append_and_take_value
We were already using this internally, this makes it public for code
which frequently appends values which are expensive to copy (like
structures, arrays, caps, ...).
Avoids copies of the values for users. The passed GValue will also
be 0-memset'ed for re-use.
New users can replace this kind of code:
gst_value_*_append_value(mycontainer, &myvalue);
g_value_unset(&myvalue);
by:
gst_value_*_append_and_take_value(mycontainer, &myvalue);
https://bugzilla.gnome.org/show_bug.cgi?id=701632
But do this only for events that are not dropped by flushing,
i.e. do it only for everything except SEGMENT and EOS.
Without this we might drop a CAPS event if flushing happens
at an unfortunate time and nobody is resending the CAPS event.
https://bugzilla.gnome.org/show_bug.cgi?id=700806
If a pad block was triggered from sending a sticky event downstream, it
could happen that the pad block is relinking pads, which then requires
to resend previous sticky events.
Previous patch was inforcing a complete ordering of the sticky events, while
in fact, only STREAM_START, CAPS and SEGMENT events need proper ordering.
See: https://bugzilla.gnome.org/show_bug.cgi?id=688188
We can prevent buggy element from causing other elements to fail or crash
by sorting sticky event at insertion. In this case, we also warn as this
is not supposed to happen.
See: https://bugzilla.gnome.org/show_bug.cgi?id=688188
Fixes abort when the old specifiers are used. Fix up the conversion
specifier, it would get overwritten with 'c' below to the extension
format char, which then later is unhandled, leading to the abort.
Also fix up and enable unit test for this.
https://bugzilla.gnome.org/process_bug.cgi
Source elements with limited bandwidth capabilities and supporting
buffering for downstream elements should set this flag when answering
a scheduling query. This is useful for the on-disk buffering scenario
of uridecodebin to avoid checking the URI protocol against a list of
hardcoded protocols.
Bug 693484
API: GST_PLUGIN_STATIC_DECLARE()
API: GST_PLUGIN_STATIC_REGISTER()
Based on a patch by Håvard Graff <havard.graff@tandberg.com>.
This now allows GST_PLUGIN_DEFINE() to create a static plugin if
GST_PLUGIN_BUILD_STATIC is defined. The resulting plugin can be
statically linked or dynamically linked during compilation but
can't be dynamically loaded during runtime.
Also adds GST_PLUGIN_STATIC_DECLARE() and GST_PLUGIN_STATIC_REGISTER(),
which allows to register a static linked plugin easily.
It is still required to manually register every single statically linked
plugin from inside the application as this can't be automated in a portable
way.
A new configure parameter --enable-static-plugins was added that allows
to build all plugins we build here as static plugins.
Fixes bug #667305.
The gst_plugin_feature_rank_compare_func() should return
negative value, if the rank of both PluginFeatures are equal and
the name of first PluginFeature comes before the second one.
https://bugzilla.gnome.org/show_bug.cgi?id=697990
Don't use snprintf(), but use sprintf instead and do our own
length calculations, because glibc may complain about us passing
%n in a format string if the string is in writable memory, and
here the format string is always in writable memory since we
construct it on the fly. This happens if glibc has been compiled
with _FORTIFY_SOURCE=2, which seems to be the case on some
distros/systems). On the upside, we now use the sprintf code path
on all systems which should be better from a maintenance point
of view.
https://bugzilla.gnome.org/show_bug.cgi?id=697970
Make GST_PLUGIN_DEFINE use G_STRINGIFY() to convert the name argument
into a meaningful string. The advantage of this is that `name' can be
expanded from other macros defined in the plug-in element.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=697872
Don't use just GLIB_HAVE_ALLOCA_H to check if alloca is available,
that's just for the header. GLib may define alloca for us otherwise
too irrespective of GLIB_HAVE_ALLOCA_H.
Fixes compiler warning with mingw32:
gst/printf/vasnprintf.c:73:0: warning: "alloca" redefined
Does not do anything yet. On a sidenote, we can't just use
%p\001 or so to signal the extension because g-i complains
about an invalid ascii character then, so have to resort to
something more elaborate, such as %p\aA etc.
https://bugzilla.gnome.org/show_bug.cgi?id=613081
and remove all the printf extension/specifier stuff for
the system printf. Next we need to add back the custom
specifiers to our own printf implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=613081
We will add support for our own printf modifiers, so we can
get nice debug log output on all operating systems irrespective
of the specific libc version used.
https://bugzilla.gnome.org/show_bug.cgi?id=613081
Iterate over the fields of the superset instead of those of the subset.
This way we can check the presence of the subset field and do the subset check
in one iteration.
Very often, when the end of a segment is detected by demuxer, the position
is slightly outside the segment boundaries. Currently, if that is the case
the base will be set to NONE instead of normal accumulation. This would
break non-flushing seeks in oggdemux and most likely other demuxers.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696899
This is equal to any other caps features but results in unfixed caps. It
would be used by elements that only look at the buffer metadata or are
currently working in passthrough mode, and as such don't care about any
specific features.
These are meant to specify features in caps that are required
for a specific structure, for example a specific memory type
or meta.
Semantically they could be though of as an extension of the media
type name of the structures and are handled exactly like that.
Elements should override GstElement::set_context() and also call
gst_element_set_context() to keep this context up-to-date with
the very latest context they internally use.
When flushing, it is expected that upstream will send a SEGMENT
event afterwards.
This also avoids stray SEGMENT events from coming through after a
flush.
Unref the allocator *after* we have freed the memory. We also need to keep
a ref to the allocator around because following the now freed memory would
lead to crashes.
This reverts commit 1a1a9e143f.
This breaks the pipelines/tagschecking unit test for some reason
(fakesrc ! capsfilter ! qtmux linking fails now). It might be
a bug in the unit test of course, but someone will need to
investigate this. Reverting for now.
https://bugzilla.gnome.org/show_bug.cgi?id=692508
Only use the allocator of the copied memory when we can use the default
_alloc function on it. Otherwise we will have to use the default
allocator for the copy.
motivation comes from: /* FIXME: why not gst_pad_get_pad_template (pad); */
this code path is quite nicer, we now only revert to creating the template
if gst_pad_get_pad_template fails.
with this fork, we gain a non-allocation of GstCaps *templcaps
https://bugzilla.gnome.org/show_bug.cgi?id=692508
Set operations on the bitmasks don't make much sense and result
in invalid caps when used as a channel-mask. They are now handled
exactly like integers.
This functionality was not used anywhere except for tests.
https://bugzilla.gnome.org/show_bug.cgi?id=691370
gst_bin_query() now forwards the query to the source pads as well if
none of the sinks of the bin satisfied the query. This helps in the
case of DURATION queries done a bin containing a source element.
Fixes bug 638749
Under certain GST_STATE_CHANGED_PAUSED_TO_PLAYING transitions, a pipeline with
a NULL clock will fail an assertion due to an unchecked call to gst_object_ref().
This is fixed by simply adding a check and only ref-ing if the clock is not NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=693065
Add gstenumtypes.h/c for inclusion with g-ir-scanner. This fixes
problems where introspection based bindings think GstState is
typeless due to the GType not being included as an annotation.
https://bugzilla.gnome.org/show_bug.cgi?id=691185
the code ifed a debug statement, that can't be right. anyway, the way it is,
we don't really need that branch, as we set the flag to unset only if set
(and that can't fail) hence the end result is always to unset the flag.
Signed-off-by: Niv Sardi <xaiki@evilgiggle.com>
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=691985
The _1_0 suffixed environment variables override the
non-suffixed ones, so if we're in an environment that
sets the _1_0 suffixed ones, such as jhbuild, we need
to set those to make sure ours actually always get
used.
Avoid unnecessary value copying, and unnecessary init/unset
cycles which all go through the value table. There's a bunch
of places where we copy a value and then unset it in the next
line, instead of just taking over the source value.
Add a GST_BIN_FLAG_NO_RESYNC that disables a resync when an element is added,
removed or linked in the bin. This is interesting for complex bins that
dynamically add elements to themselves and want to manage the state of those
elements without interference from resyncs.
See https://bugzilla.gnome.org/show_bug.cgi?id=690420
We don't need to link to gthread-2.0 any longer, since all
the normal thread-related stuff is in GLib proper, and we
don't use g_thread_init() any more.
https://bugzilla.gnome.org/show_bug.cgi?id=689043
The function init_pre() in gstreamer/gst/gst.c calls setlocale(LC_ALL, ""),
which sets the locale to the values specified in the environment. This is
wrong for two reasons:
1. It is absolutely not the task of a library to decide on the correct locale
for a program. Some programs change the locale for various (good or bad)
reasons, and libraries should respect that. Programs where GStreamer's
overwriting of the locale causes bugs include Emacs [1, 2], Sublime Text [3],
and Lua [4].
[1] http://debbugs.gnu.org/cgi/bugreport.cgi?bug=12392
[2] http://bugzilla.novell.com/show_bug.cgi?id=779426
[3] http://www.sublimetext.com/forum/viewtopic.php?f=3&t=8543
[4] https://github.com/pavouk/lgi/issues/19
Note that setting the locale can cause problems for programs that are not even
linked against GStreamer. In the case of Emacs, for example, GStreamer seems
to be initialized through GTK via libcanberra.
2. Setting the locale is not thread-safe, and therefore should not be done in a
library.
https://bugzilla.gnome.org/show_bug.cgi?id=685650
passing argument 1 of 'g_mutex_lock' discards 'const' qualifier from pointer target type
passing argument 1 of 'g_mutex_unlock' discards 'const' qualifier from pointer target type
It's usually not a problem if a query fails if there's no peer,
especially as it will happen during pad linking (caps query)
quite often and spams the logs.
If we try to push sticky events but a probe dropped them, we don't mark
the event as received and mark the pad as PENDING_EVENTS. This ensures
that we resend the event the next time. For this we need to let the
custom flow return from the probe trickle up to
gst_pad_push_event_unchecked() so that we can differentiate between
OK and DROPPED probe returns.
First check that we can actually register the implementation before
making a GstMetaInfo. If we can't register we would otherwise end
up with an undefined type and an invalid GstMetaInfo.
It's possible that type registration fails because another metadata
with the same implementation name was already registered.
Fixes negotiation taking a ridiculous amount of
time (multiple 10s of seconds on a core2) when
there are duplicate entries in lists.
Could have a negative performance impact on other
scenarios because we now have to iterate the
dest list to avoid duplicates, but we don't
have a lot of lists any more these days, and
they tend to be small anyway. The negatives
are hopefully countered by the positive effects
of reducing the list length early on in the
process. And in any case, it's the right thing
to do.
Based on patch by Andre Moreira Magalhaes.
https://bugzilla.gnome.org/show_bug.cgi?id=684981
This happened when glib was not using system printf, and caused the
internal gstreamer printf extensions to be used for all %p printfs,
causing crashes.
https://bugzilla.gnome.org/show_bug.cgi?id=684970
Also add test to make sure that if a pad probe is removed while it's
callback is running, the cleanup_hook isn't called again if it
returns GST_PAD_PROBE_REMOVE
Facilitate GstBuffer -> GstSample transition for some tags,
could be hard to catch otherwise when creating tags, since
it'll only be apparent later when someone tries to read the
tags.
We usually first create the stream_id for the stream_start event and then add
the pad to the element. This means that this functions should work when there
are no pads on the element yet.
Recheck for sticky events after doing a pad block because the pad block could
have caused a relink and then we need to resend the events to the newly linked
pad.
Fixes things like switching of visualisations.
The duration should be re-queried via a query using the
normal path, we don't want applications to use the value
from the message itself, since it might no match what a
duration query done from the sink upstream might yield.
Also disables duration caching in GstBin. It should be
added back again at some point.
When making a copy of the memory allocated from the default memory allocator,
make sure the new copy has the same alignment as the original memory.
See https://bugzilla.gnome.org/show_bug.cgi?id=680796
Elements such as the GstIirEqualizerNBands would so far not store the properties
of their children. Now we also grab the properties of child elements and try to
restore them.
Not so useful: just adds/reads stuff from an internal GList without
actually doing anything with those paths, so remove for now:
gst_registry_add_path
gst_registry_get_path_list
https://bugzilla.gnome.org/show_bug.cgi?id=608841
No longer accept any old GObjects. This makes things nicer for
bindings. If a utility function that handles both nicely
is deemed worthwhile, we can still add one to gstutils.
https://bugzilla.gnome.org/show_bug.cgi?id=681681
Add an alternative version of gst_pad_check_reconfigure that doesn't
clear the reconfigure flag.
Useful for increasing error resilience without duplicating the
reconfigure code in pad task functions.
API: gst_pad_needs_reconfigure
https://bugzilla.gnome.org/show_bug.cgi?id=681198
GObject Introspection does not support macros.
This is needed for bindings. We can still add back
macros or inline functions again later if we think
it's worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=678301
When max_buffers > 0 and the pool is empty, actually try to allocate more
buffers up to the max_buffers limit.
We need to add a counter for this to count how many buffers we allocated and
check this against the max_buffers limit.
Reorganise and clean up some code.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=681153
The order of returned pads wasn't specified before, so let's specify
it and use an order which might prove the most useful : the order in
which pads were added to the element.
If someone changes the order, make sure users of those iterators from
now on don't rely on that order !
This is because we need to be able to signal different TOCs
to downstream elements such as muxers and the application,
and because we need to send both types as events (because
the sink should post the TOC messages for the app in the
end, just like tag messages are now posted by the sinks),
and hence need to make TOC events multi-sticky.
https://bugzilla.gnome.org/show_bug.cgi?id=678742
This specifies if a given taglist applies to the complete
medium or only this specific stream. By default a taglist
has a stream scope.
Fixes bug #677619.
Add an offset field that is used to track at what position the segment was
updated. This is used to set the running time to 0 when we do a flushing
seek that doesn't update the position.
See https://bugzilla.gnome.org/show_bug.cgi?id=680306
Remove the user_data from the alloc vmethod. Subclasses that implement a new
alloc function can also implement their own vmethod to pass extra arguments. We
can then also require that custom allocators implement an alloc function so that
gst_allocator_alloc() always works.
So we can serialise/deserialise taglists inside structures,
which used to work automagically before because GstTagList
was just a typedef to GstStructure (same for the GType),
but now that it's a separate GType we need to register
explicit functions for this.
Helps with GDP stuff in pipelines/streamheader tests.
Remove the estimated-total field, this should not be part of the buffering
message.
Set the default value of buffering-left to 0 when the percent is 100.
In the proxy_query_caps function, also filter against the filter in the query.
We don't need to filter against the filter in the query anymore in the default
caps query function because we already did this in the proxy_query_caps.
Define a 0 and -1 step amount. They used to almost do the same thing but now, 0
cancels/stops the current step and -1 keeps on stepping until the end of the
segment.
See https://bugzilla.gnome.org/show_bug.cgi?id=679378
This reverts commit dd9fedb41f.
This is not the right place to escape the \, we should only escape the spaces to
keep the arguments together that were provided as one group (with quotes on the
shell).
Stop querying the duration once an element return unknown and return unknown
as a final result. This avoid eventually cutting off a stream too early.
Add a tests to docuement the behavior.
The ghostpad code directly activates/deactivates the child code by
calling gst_pad_activate_mode, rather than gst_pad_set_active, so
make sure to clear the flags in gst_pad_activate_mode(), which should
catch all cases.
Make gst_query_add_allocation_meta() take a copy of the passed caps instead of
taking ownership. This makes it easier for the caller in most cases because it
doesn't have to make a copy and deal with NULL values.
Make GstAllocator a GstObject instead of a GstMiniObject, like bufferpool.
Make a new gstallocator.c file. Make a GstAllocator subclass for the default
allocator.
Clear the initial floating ref in the init function for
busses and clocks. These objects can be set on multiple
elements, so there's no clear parent-child relationship
here. Ideally we'd just not make them derive from
GInitiallyUnowned at all, but since we want to keep
using GstObject features for debugging, we'll just do
it like this.
This should also fix some problems with bindings, which
seem to get confused when they get floating refs from
non-constructor functions (or functions annotated to
have a 'transfer full' return type). This works now:
from gi.repository import GObject, Gst
GObject.threads_init()
Gst.init(None)
pipeline=Gst.Pipeline()
bus = pipeline.get_bus()
pipeline.set_state(Gst.State.NULL)
del pipeline;
https://bugzilla.gnome.org/show_bug.cgi?id=679286https://bugzilla.gnome.org/show_bug.cgi?id=657202
This re-uses existing code and makes sure we properly serialise
and deserialise datetimes where not all fields are set (thus
fixing some warnings when serialising such datetimes).
We still don't do that in _to_iso8601_string() though, since
this will probably mostly be used in tags, where it doesn't
matter so much and the microsecond argument might not be
well-received by some tag readers.
When we fail to parse the number of seconds, reset the value to -1
instead of passing some error value as seconds. Also, we can still
try to parse timezone information.
Expose the GstAllocation structure and provide an _init function. This makes it
easier to make 'subclasses' of the allocator that contain more info.
It also allows us to expose the flags on the allocator miniobject.
Make a flag to note that the allocator uses a custom alloc function.
Make it possible to add API specific flags to the ALLOCATION query. This makes
it possible to also check what kinds of subfeatures of the metadata API are
supported.
Add a method that memory implementations can call to initialize the standard
GstMemory structure.
Move the parent handling in the _free handler.
Rearrange some internal function parameters so that the order is consistent.
Add more memory examples
Move the locking methods from GstMemory to GstMiniObject.
Add a miniobject flag to enable LOCKABLE objects. LOCKABLE objects can
use the lock/unlock API to control the access to the object.
Add a minobject flag that allows you to lock an object in readonly mode.
Modify the _is_writable() method to check the shared counter for LOCKABLE
objects. This allows us to control writability separately from the refcount for
LOCKABLE objects.
The NO_SHARE flag does not influence the exclusiveness of the buffer initially
but only if a _share operation can be done. Otherwise, we would not be able to
WRITE map a buffer memory because it would have a share count of at least 2.
We implement the locking in gst_memory_map with the lock flags, make matching
flags the same number so that we can use the map flags directly as lock flags.
Expose the internally used methods for locking and unlocking the object. Pass
the access mode to the unlock function for extra checks and because we need it
for the EXCLUSIVE locks.
Make some new defines to specify the desired locking.
Add a new EXCLUSIVE lock mode which will increment the shared counter. Objects
with a shared counter > 1 will not be lockable in WRITE mode.
Improve parallel installability in setups like jhbuild by
providing versioned variants of some environment variables:
GST_REGISTRY_1_0
GST_PLUGIN_PATH_1_0
GST_PLUGIN_SYSTEM_PATH_1_0
GST_PLUGIN_SCANNER_1_0
will now be checked before checking the unversioned ones.
https://bugzilla.gnome.org/show_bug.cgi?id=679407
We added a minimum length of three letters originally so we would
fail to recognise DOS/Windows-style filenames as valid URIs (as we
should). Two should be just fine as well.
Make GstSeekFlag to GstSegmentFlag conversion explicit, and
set only those seek flags in the segment flags which are
mapped. This makes sure we don't have extraneous flags
littering our segment flag field, which also fixes the
debug printing/serialisation of segment events in the
debug log.
Visual C++ does not have isnan(), so add fallback to
math-compat.h (could use _isnan() in this case, but
this makes it work for all cases where isnan is missing).
https://bugzilla.gnome.org/show_bug.cgi?id=679112
Make a gst_buffer_append_region() function that allows you to append a memory
region from one buffer to another. This is a more general version of
gst_buffer_append().
If we have a file called Foo\Bar.ogg, there is no way to pass
that filename properly to filesrc in gst_parse_launch(), since
gst_parse_unescape() will just unescape \x to x.
Not cherry-picking this into 0.10 since there are apparently
apps that work around this problem and which would break if
we fixed it there too.
https://bugzilla.gnome.org/show_bug.cgi?id=673319
Take into account that not all fields might be valid (though they
are valid in the GDateTime structure). But we should just return
unordered if the set fields don't match. Also, don't check
microseconds when comparing datetimes, since we don't serialise
those by default if they're available. This ensures date times are
still regarded as equal after serialising+deserialising.
Some tag parsers and writers use same datetime format based on ISO 8601.
We can reduce some code by creating some general functions for it.
API: gst_date_time_to_iso8601_string()
API: gst_date_time_new_from_iso8601_string()
https://bugzilla.gnome.org/show_bug.cgi?id=678031
Now that TOCs are refcounted and have a GType, we can just
stuff a ref of the TOC directly into the various toc
event/message/query structures and get rid of lots of
cracktastic GstStructure <-> GstToc serialisation and
deserialisation code. We lose some TOC sanity checking
in the process, but that should really be done when
it's being created anyway.
Let's keep it simple for now:
gst_toc_setter_reset_toc() -> gst_toc_setter_reset()
gst_toc_setter_get_toc_copy() -> removed
gst_toc_setter_get_toc() -> returns a ref now
gst_toc_setter_get_toc_entry_copy() -> removed,
use TOC functions instead
gst_toc_setter_get_toc_entry() -> removed,
use TOC functions instead
gst_toc_setter_add_toc_entry() -> removed,
to avoid problems with (refcount-dependent)
writability of TOC; use TOC functions instead
So mini objects don't have to poke into the GstMiniObject part
of the structure. Saves lines of code, and seems slightly cleaner.
We don't have proper OO hierarchies or methods here after all.
