Commit graph

511 commits

Author SHA1 Message Date
Sebastian Dröge
ee300b6c33 mpegtspacketizer: Reset values before parsing each section 2016-11-22 13:00:21 +02:00
Sebastian Dröge
ab4bb225bd mpegtspacketizer: Make sure in all cases that we have enough data left for reading a section start
In some cases we ended up parsing sections without.
2016-11-22 12:56:03 +02:00
Scott D Phillips
0345fb8aef mpegtsdemux: fix operator precedence in SAFE_FOURCC_ARGS
Type cast has higher precedence than bitwise shift, so the third
argument will truncate to 8 bits and then shift right by 8 bits
resulting in constant zero.

https://bugzilla.gnome.org/show_bug.cgi?id=774293
2016-11-12 10:53:02 +02:00
Edward Hervey
6622e2dacf mpegtsdemux: Implement efficient program updates
If the parent bin can handle it, only add/remove the new/gone stream
instead of re-adding/re-moving everything

https://bugzilla.gnome.org/show_bug.cgi?id=772742
2016-10-12 15:07:46 +02:00
Edward Hervey
ddacbb7793 mpegtsdemux: Ensure we always get an upstream stream-id
This was a regression.

We only have a upstream-id via STREAM_START if we were in push-mode.
In pull-mode we need to create one.

Note: It would be good to eventually have that method (copied from
gst_pad_get_stream_id_internal()) public in the future
2016-10-12 14:35:21 +02:00
Edward Hervey
ee70f830a8 mpegtsdemux: Fix issues with GST_DISABLE_GST_DEBUG
Some variables were hidden or unused
2016-10-11 16:47:37 +02:00
Edward Hervey
bcc06d679a mpegtsdemux: Switch to using GstStream/GstStreamCollection
For each MpegTSBaseStream, we have a GstStream object which
subclasses can extend with information.

For each program a GstStreamCollection is created with all
GstStream from each stream.
2016-10-11 12:38:02 +02:00
Edward Hervey
dc703b50b3 mpegtsbase: Remove duplicated code
Just have one function to check for private section streams
2016-10-11 12:37:57 +02:00
Edward Hervey
fb36608ccd mpegts: Also clear packetizer on TIME DISCONT
When dealing with TIME-based input, the incoming stream could have
potentially changed completely.

In order to check whether it did or not, we need to re-check all sections
(PAT, PMT...). If it didn't, we will keep using the existing streams/pad,
and if it did we will act as if there was a program switch.

Fixes HLS streaming with decodebin3/playbin3
2016-10-08 14:14:00 +02:00
Wonchul Lee
69b866326e tsdemux: Add conditions to identify ATSC EAC3
https://bugzilla.gnome.org/show_bug.cgi?id=770528
2016-10-03 15:14:54 -04:00
Graham Leggett
7713bb763e tsdemux: handle a NULL name in DVB short event descriptor
Resolves the warning:

GStreamer-WARNING **: Trying to set NULL string on field 'title' on taglist.

https://bugzilla.gnome.org/show_bug.cgi?id=771198
2016-09-13 12:23:28 +01:00
Wonchul Lee
35d147930d tsdemux: Support ATSC EAC3
EAC3 bit streams shall be identified with a stream_type value of 0x87 when
transmitted as PES streams conforming to ATSC-published standards. It is specified
in ATSC Standard A/52.

https://bugzilla.gnome.org/show_bug.cgi?id=770528
2016-09-01 17:56:41 -04:00
Thibault Saunier
2fb716409c Use the new API to post flow ERROR messages on the bus
https://bugzilla.gnome.org/show_bug.cgi?id=770158
2016-08-26 19:23:31 -03:00
Thibault Saunier
50473d77cc meson: Make mpegts lib build when using subprojects
The headers passed as parametter are relative to the build dir
basically "../subproject/gst-plugins-bad/gst-libs/gst/mpegts/XXX.h"
but that does not match what is needed at build time when building as
subproject, also we always add current dir as include_dir so we are
safe including directly.

And link mpegtsdemux against the 'math' library as it is needed.
2016-08-25 15:17:17 -03:00
Nirbheek Chauhan
42af2d66d8 Add support for Meson as alternative/parallel build system
https://github.com/mesonbuild/meson

With contributions from:

Tim-Philipp Müller <tim@centricular.com>
Matej Knopp <matej.knopp@gmail.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)

Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded

... and many more. For more details see:

http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.html
http://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html

Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
2016-08-20 11:35:54 +01:00
Edward Hervey
51c5ff45de tsdemux: Fix draining on wrong programs
When draining a program, we might send a newsegment event on the pads
that are going to be removed (and then the pending data).

In order to do that, calculate_and_push_newsegment() needs to know
what list of streams it should take into account (instead of blindly
using the current one).

All callers to calculate_and_push_newsegment() and push_pending_data()
can now specify the program on which to act (or NULL for the default
one).
2016-08-03 17:15:41 +02:00
Edward Hervey
e2b98a7721 tsdemux: Fix GAP synchronization without a valid PCR PID
For streams that don't have a valid PCR PID, we just use the latest
PTS from any given stream.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:41 +02:00
Michael Olbrich
36e6590335 tsdemux: handle pcr_pid == 0x1fff
Streams without PCR make senses in HLS, where the playlist timestamps
can be used to seek or calculate the duration.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:41 +02:00
Arnaud Vrac
7a3d189250 mpegtsdemux: do not abort playback when no PCR were found during initial scan
Seeking will not be possible in those streams but at least the can be
played. Note scanning is only done when tsdemux is configured in pull mode.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:41 +02:00
Arnaud Vrac
35a1720de1 mpegtsdemux: only wait for PCR when PCR pid is set
Streams without PCR make senses in HLS, where the playlist timestamps
can be used to seek or calculate the duration.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:40 +02:00
Michael Olbrich
48c5cc1b1b tsdemux: add support for LPCM with stream_type = 0x83
https://bugzilla.gnome.org/show_bug.cgi?id=765807
2016-07-25 13:38:29 +03:00
Jan Schmidt
e3f5ccb333 tsdemux: Change the pad naming scheme to include a generation ID
A simple fix for the problem of creating new pads with duplicate
names when switching program, easier than the alternative of
trying to work out which pads might persist and manage that.

See https://bugzilla.gnome.org/show_bug.cgi?id=758454
2016-06-06 13:05:34 +03:00
Damian Ziobro
abc1c4fc9a mpegtsbase: remove unused variables: upstream_live and queried_latency
https://bugzilla.gnome.org/show_bug.cgi?id=766343
2016-05-13 10:28:46 +03:00
Jan Schmidt
d6ea4d83f2 mpegtsbase: Fix when applying new PMT with same program number
When the sub-class is delaying deactivation of the old program,
but it has the same program number as the new program, don't
overwrite the old program in the hash table and then steal
the new program back out of it. Instead, add the new program to
the hash table after handling removal of the old one.
2016-04-12 14:09:47 +10:00
Thiago Santos
dbd12ec82b mpegtsbase: plug EIT string leak 2016-03-24 11:29:35 -03:00
Thiago Santos
f8cad7d755 mpegtspacketizer: simplify variable reset
Just set it directly to 0, instead of checking and reseting
2016-03-24 11:06:55 -03:00
Vineeth TM
8cdfb13658 bad: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763081
2016-03-24 14:56:51 +02:00
Tim-Philipp Müller
5ec337f8ae tsdemux: add video/x-h265 to template caps 2016-03-12 15:44:54 +00:00
Jan Schmidt
6de7f0c0fa mpegts: Don't leave freed programs in the hash table
When the sub-class claims a program for later freeing, make
sure it's not left in the hash table, or it can cause crashes on shutdown.

Make sure tsdemux frees any program it has kept around at shutdown
if it wasn't freed already.

https://bugzilla.gnome.org/show_bug.cgi?id=763503
2016-03-12 03:32:32 +11:00
Edward Hervey
215c9eb71a tsdemux: Don't reset/recalculate segments with accurate seeks
When dealing with accurate seeks, we must send out a segment which
is exactly what is requested.

https://bugzilla.gnome.org/show_bug.cgi?id=763262
2016-03-08 15:13:40 +01:00
Aurélien Zanelli
d87177b69b mpegtspacketizer: handle early PTS conversion when a group has been found
In some cases, the PTS might be smaller than the first observed PCR
value which causes element to apply wraparound leading to bogus
timestamp. To solve this, we only apply it if the PTS-PCR difference is
greater that 1 second to be sure that it's a real wraparound.

Moreover, using unsigned 32 bits values to handle wrapover could end up
with bogus value, so it use pts value to handle it.

Also, convert pcr time to gst time before comparing it to pts.
Since refpcr is expressed in PCR time base while pts is expressed in GStreamer
time.

https://bugzilla.gnome.org/show_bug.cgi?id=743259
2016-03-03 00:50:15 +11:00
Edward Hervey
ab31900b64 tsparse: Fix per-program-pad pushing
This fixes a couple of issues regarding the output of (request)
per-program pads output:

We would never push out PAT sections (ok, that was one reallly stupid
mistake. I guess nobody ever uses this feature ...).

In the case where the PMT section of a program was bigger than one
packet, we would only end up pushing the last packet of that PMT. Which
obviously results in the resulting stream never containing the proper
(complete) PMT.

The problem was that the program is only started (in the base class)
after the PMT section is completely parsed. When dealing with single-program
pads, tsparse only wants to push the PMT corresponding to the requested
program (and not the other ones). tsparse did that check by looking
at the streams of the program...
... but that program doesn't exist for the first packets of the initial
PMT.

The fix is to use the base class program information (if it parsed the
PAT it already has some information, like the PMT PID for a given program)
if the program hasn't started yet.
2016-02-19 18:12:59 +01:00
Edward Hervey
00a1879d65 tsparse: Use GstFlowCombiner
In addition to the fact that it's a sane thing to do for multi-source
pad elements, it also avoids the situation where just using a request
pad (and not the main static pad) would result in the processing
stopping.
2016-02-19 18:04:23 +01:00
Vineeth TM
ee8a5455d0 mpegtsbase: Refactor code to check for subclass seek handling
If subclass is not able to handle seek event, then there is no need to
stop streaming and send flush events. We should simply return FALSE

https://bugzilla.gnome.org/show_bug.cgi?id=758516
2016-02-17 10:51:07 +02:00
Vineeth TM
6676ed6cb0 mpegtsbase: Add condition to check for non working negative rate
tsdemux is not able to handle negative playback rates.
But in mpegtsbase, the same check is not being done.
added a check to not handle negative rate while seeking unless
the same is handled upstream.

https://bugzilla.gnome.org/show_bug.cgi?id=758516
2016-02-17 10:51:07 +02:00
Edward Hervey
a21c2618c5 tsdemux: Expose DVB Subpicture as subpictures
For some reason we were considering them as private data.
2015-12-02 14:15:04 +01:00
Edward Hervey
531117b7df tsdemux: Push GAP events *after* deactivating old programs
The order in which program switch must happen is:
1) drain all data on old pads (but don't push EOS)
2) add new pads (but don't push any data on them)
3) Push EOS and remove old pads
4) Start pushing data on new pads

There was one caveat in this implementation, which is that when
we activate a sparse pad (step 2) we would push a GAP event. The problem
is that, while being an event, it is actually *data*.

We therefore need to make sure pushing those GAP event is done at the step
we start pushing data.

https://bugzilla.gnome.org/show_bug.cgi?id=750402
2015-12-02 14:15:04 +01:00
Edward Hervey
7336294635 tsdemux: Make sure old streams are drained before switching
Before we add any streams, make sure we drain all streams. This ensures
there's consistency that only "new" data will be pushed on buffers once
the new pads are added

https://bugzilla.gnome.org/show_bug.cgi?id=750402
2015-12-02 14:15:04 +01:00
Edward Hervey
14e6d2d427 mpegtsdemux: Allow deactivation of programs to be delayed
When changing programs, the order of events needs to be the following:
* add pads from new program
* send EOS on old pads
* remove old pads
* emit 'no-more-pads'

Previously tsdemux was not doing that, and was first deactivating and
removing old pads before adding new ones.

We fix this by allowing subclasses of mpegtsbase to be able to handle
themselves the deactivation of programs. In this case tsdemux will
properly deactivate it once it has activated the new program.

https://bugzilla.gnome.org/show_bug.cgi?id=750402
2015-12-02 14:15:04 +01:00
Reynaldo H. Verdejo Pinochet
86ec812429 Remove unnecessary NULL checks before g_free()
g_free() is NULL-safe
2015-11-18 16:05:42 -08:00
Nicolas Huet
d65d8657e6 mpegtsdemux: fix section_data leak
If packet->payload_unit_start_indicator is true and pointer 0, there is no
discontinuity check. Therefore there could be a previous section not complete
that need to be cleared.

https://bugzilla.gnome.org/show_bug.cgi?id=758010
2015-11-13 09:37:53 +01:00
Luis de Bethencourt
fc23467152 tsdemux: remove memory leak
The values of channel_mapping are copied by gst_codec_utils_opus_create_caps ()
but it doesn't free or take ownership of the g_new0 allocated memory. This
needs to be freed before going out of scope.

CID 1338692
2015-11-12 12:08:15 +00:00
Nicolas Huet
21a025c2a1 tsdemux: fix pending buffers leak when flushing
https://bugzilla.gnome.org/show_bug.cgi?id=757895
2015-11-11 15:35:54 +01:00
Etienne Peron
a336181ef5 tsdemux: Fix pad leak when the pad is never exposed
If tsdemux never receives data for a stream, the corresponding pad will never
be added and stream->active will remain FALSE. When the stream is removed, the
pad will not be unreffed and will be leaked.

https://bugzilla.gnome.org/show_bug.cgi?id=757873
2015-11-11 15:32:30 +01:00
Matthew Waters
ac9a2971bd tsdemux: provide our own definition of log2()
The log2 function/macro doesn't exist when targetting android API < 18 (or MSVC
< 2013) whereas our current baseline is API 9.
2015-11-11 18:57:55 +11:00
Tim-Philipp Müller
edab4deb3a glshader, tsdemux: simplify code
Jus use _delete_link() instead of _remove_link() + _free1()
2015-11-06 13:00:55 +00:00
Sebastian Dröge
ee2e082a27 tsdemux: Don't create an incomplete OpusHead but set all the other caps fields instead
OpusHead is optional, the other fields are not.

https://bugzilla.gnome.org/show_bug.cgi?id=757152
2015-11-03 20:35:41 +02:00
Sebastian Dröge
2609c394d7 tsmux: Simplify Opus caps parsing by using codecutils helpers
https://bugzilla.gnome.org/show_bug.cgi?id=757152
2015-11-03 20:35:41 +02:00
Sebastian Dröge
ecf7c7742c tsdemux/mux: Add support for GstAudioClippingMeta for Opus
https://bugzilla.gnome.org/show_bug.cgi?id=757153
2015-11-03 20:35:41 +02:00
Sebastian Dröge
1e785a3778 tsdemux: Add support for Opus
Code partially based on
  https://git.videolan.org/?p=ffmpeg.git;a=commit;h=74141f693ded2fbf75af56fff309d2db35183635
and based on the spec draft at
  https://wiki.xiph.org/OpusTS

Makes it possible to demux
  http://www.obe.tv/Downloads/opus.ts

https://bugzilla.gnome.org/show_bug.cgi?id=757049
2015-11-03 20:35:41 +02:00
Tim-Philipp Müller
54fc1ed5f4 tsdemux: fix latency handling again
The tsdemux latency should always be added to the minimum
latency (which is always a valid clock time value). The
"cleanup" in commit a1f709c2 made it so that it would not
be added if upstream reported 0 as minimum latency (as
e.g. udpsrc would). This broke playback of live mpeg-ts
streaming in some cases, leading to playback stutter due
to a too-small configured latency for the pipeline.

https://bugzilla.gnome.org/show_bug.cgi?id=751508
2015-08-24 10:46:31 +01:00
Edward Hervey
7ea4a66b9f mpegtsdemux: Fix illogical comparision
A variable can't be two values at once. We want to stop if it's not the
actual ts *AND* not the other ts

CID #1316475
2015-08-16 12:56:56 +02:00
Luis de Bethencourt
7ddaf8741b mpegtsbase: remove redundant check
No need to check if done is True since break will already terminate the for
loop.
2015-07-29 16:52:08 +01:00
Edward Hervey
631b2d8826 mpegtsbase: Fix previous commit
We only want to do a hard reset of the observations if we're working
with TIME segments in push mode. For BYTE segment we want to keep
the observations (in order to do seeks in push-mode).
2015-07-09 18:33:00 +02:00
Edward Hervey
0247dc7489 mpegtsbase: Flush more on DISCONT buffers in push mode
When in push mode, we want to discard all previous observations from the
mpegtspacketizer when we get a DISCONT buffer.

This avoids trying to calculate bogus timestamps (estimating them using old
PCR observations).

We only do a hard reset in push-mode. In pull-mode we still need the observations
(in order to seek properly)
2015-07-09 18:15:54 +02:00
Tim-Philipp Müller
f0358aac16 tsdemux: remove unnecessary check
This is not public API, use g_assert() instead of
g_return_if_fail(), so that it's compiled out in
releases. It's only called from our code, with &foo.
2015-07-08 14:50:00 +01:00
Tim-Philipp Müller
eeaf4d11b7 tsdemux: add support for KLV metadata streams
There's no timestamps for these streams though, we
might want to make some up based on the last/next
video PTS or so.
2015-07-08 14:50:00 +01:00
Nicolas Dufresne
338f7e8c8d tsdemux: Segment start should match first PTS
The segment should start at first PTS, and the vairable name lower_pts
state so correctly. Though we where using the first DTS instead. This
could lead to small desynchronization of video stream.

https://bugzilla.gnome.org/show_bug.cgi?id=740575
2015-06-12 17:10:29 -04:00
Luis de Bethencourt
afcb49dcce tsdemux: correct fix for dead code
Rename template to caps to keep the original intention of the code after
commit b4c9aa1c

CID #1304674
2015-06-08 14:19:27 +01:00
Luis de Bethencourt
e9cb38017b Revert "tsdemux: remove dead code"
This reverts commit 0635acfec0.
2015-06-08 14:14:41 +01:00
Luis de Bethencourt
0635acfec0 tsdemux: remove dead code
After commit b4c9aa1c30 template will always be
NULL. The if conditional will always be FALSE, so removing it.

CID #1304674
2015-06-08 13:37:35 +01:00
Luis de Bethencourt
7aed8e184f tsdemux: remove ignored assignment
Function goes to done before the value set in start_offset is ever used.
2015-06-05 14:34:59 +01:00
Thiago Santos
b4c9aa1c30 tsdemux: refactor pad creation
Avoid repeating the same pad creation code everywhere
2015-06-04 13:51:01 -03:00
Thiago Santos
d91f5e85e7 mpegtsbase: do not access variable after unref
Data might not exist anymore
2015-06-02 16:55:08 -03:00
Aurélien Zanelli
633b4db556 tsdemux: enable Chinese AVS video stream
Chinese broadcaster encapsulate AVS video codec into MPEG2-TS. They
use the stream_id 0x42 to identify AVS video streams. It should be noted
that this id is currently within the ISO reserved range, hence it's
utilisation is unofficial.

https://bugzilla.gnome.org/show_bug.cgi?id=727731
2015-06-02 12:41:26 +01:00
Vincent Penquerc'h
1dd94be326 tsdemux: fix buffer timestamp not being in stream time
Timestamps should start at the segment start, rather than 0, so
we need to not subtract the first timestamp. This makes the sink
correctly account for running time when switching PMTs where a
stream starts not quite at zero, causing timing offsets that can
become noticeable and causing dropped frames after a few times.
2015-05-15 14:50:35 +01:00
Vincent Penquerc'h
4a219df304 tsdemux: accumulate previous segment base time 2015-05-15 14:49:04 +01:00
Vincent Penquerc'h
29fd6332a4 tsdemux: fix refcounting when applying a new PMT
A new program object is created to replace an existing one
in the programs hash table, so its refcount needs to match.

With the default of 0 refcount on creation, the next PAT
change will cause that refcount to be both incremented and
decremented (assuming the new PAT references that stream too),
which will cause the program to be destroyed.

https://bugzilla.gnome.org/show_bug.cgi?id=748412
2015-05-15 14:45:49 +01:00
Guillaume Desmottes
94446498de tsdemux: fix taglist leak
If the stream which is about to be removed still has a ref on a tag list we
should drop it.

Fix a leak which was occasionally happening with the
validate.file.playback.change_state_intensive.tron_en_ge_aac_h264_ts scenario.

https://bugzilla.gnome.org/show_bug.cgi?id=748576
2015-04-28 14:58:03 +01:00
Jimmy Ohn
365375a1de mpegtspacketizer: fix find_subtable() return value
find_subtable() returns a pointer, so return NULL and
not FALSE when nothing is found.

https://bugzilla.gnome.org/show_bug.cgi?id=748527
2015-04-28 14:48:22 +01:00
Luis de Bethencourt
925b65b02e Rename property enums from ARG_ to PROP_
Property enum items should be named PROP_ for consistency and readability.
2015-04-27 10:55:18 +01:00
Tim-Philipp Müller
699452ef31 Remove obsolete Android build cruft
This is not needed any longer.
2015-04-26 18:59:32 +01:00
Luis de Bethencourt
fa4822a41b tsdemux: clean assignment typo
No need to set the value twice.

https://bugzilla.gnome.org/show_bug.cgi?id=745102

CID #295122
2015-04-20 11:30:28 +01:00
Luis de Bethencourt
f52cf2a7c4 tsdemux: remove dead code
position of GstSegment is an unsigned int64, it can never be below zero.

CID #1295123
2015-04-20 10:58:33 +01:00
Olivier Crête
b4219a3e63 mpegtsbase: Remove unused latency query code
The behavior changes based on the type of segment,
not on the liveness of the source.
2015-04-17 13:59:08 -06:00
Olivier Crête
a1f709c293 tsdemux: Cleanup latency query handling
The minimum latency is always 0 or more. And we should
requery upstream as it may have changed.
2015-04-17 13:59:08 -06:00
Edward Hervey
ed27244c03 mpegtspacketizer: Unify debug statements
Use 0x%04x for PIDs
2015-04-17 16:21:28 +02:00
Edward Hervey
b80ae9cdcd tsdemux: Unify duration querying code
And properly use it in the SEEKING query.

Fixes seeking with gst-play
2015-04-17 16:21:28 +02:00
Vincent Penquerc'h
cb0eaeadfd tsdemux: fix segment position tracking for the general case
Different streams can have different PTS/DTS bases, and some
streams may not even have DTS.

https://bugzilla.gnome.org/show_bug.cgi?id=745102
2015-04-16 13:35:40 +01:00
Vincent Penquerc'h
338bfe5e35 tsdemux: handle seeks with no target (ie, keep current position)
Such seeks are used to change playback rate and we do not want
to alter the position in that case, so we bypass the flush/seek
logic, and set things up so a new segment is scheduled to be
regenerated.

https://bugzilla.gnome.org/show_bug.cgi?id=735100
2015-04-09 15:44:20 +01:00
Vincent Penquerc'h
68f57d20b9 tsparse: fix timestamps not updating after a PMT change
The PCRs stay locked onto the same PID as before the change,
but the relevant PID has no reason to be the same after it.

https://bugzilla.gnome.org/show_bug.cgi?id=745102
2015-04-09 15:44:20 +01:00
Vincent Penquerc'h
ade79a9ad2 tsdemux: send new segment when a stream is added
This will happen when the PMT changes, replacing streams with
new ones. In that case, we need to accumulate the running time
from the previous chain in the segment base.

https://bugzilla.gnome.org/show_bug.cgi?id=745102
2015-04-09 15:44:20 +01:00
Vincent Penquerc'h
fc2460b331 tsdemux: keep track of current position
This allows seeking to correctly set the base on the segment.

https://bugzilla.gnome.org/show_bug.cgi?id=745102
2015-04-09 15:44:20 +01:00
Thiago Santos
b347ea9870 tsdemux: Fix segment and segment event handling during seeking
Always update the segment and not only for accurate seeking and always
send a new segment event after seeks.

For non-accurate force a reset of our segment info to start from
where our seek led us as we don't need to be accurate

https://bugzilla.gnome.org/show_bug.cgi?id=743363
2015-02-13 15:29:24 -03:00
Thiago Santos
b18a09dbec tsdemux: remove update segment logic
This is not needed in 1.x series anymore
2015-02-03 13:50:42 -03:00
Aurélien Zanelli
d0a50be26d tsdemux: don't mark streams as needing a new segment on flush
The flush is called on discont and we shouldn't output a new segment
each time a discont happens. So this commit remove the mark for a new
segment when flushing streams by propagating the 'hard' flag passed
on the flusing from the base class.

https://bugzilla.gnome.org/show_bug.cgi?id=743363
2015-02-03 13:50:42 -03:00
Sudip Jain
9f2cb50f54 mpegtsbase: scan more bytes to find initial PCRs
Fixes playback of Samsung-Colorful-Variety-1080i.ts.

https://bugzilla.gnome.org/show_bug.cgi?id=729768
2014-12-13 01:59:07 +00:00
Edward Hervey
56ae254dd3 mpegtbase: Improve last PCR detection
When dealing with random-access content (such as files), we initially
search for the last PCR in order to figure out duration and to handle
other position estimation such as those used in seeking.

Previously, the code looking for that last PCR would search in the last
640kB of the file going forward, and stop at the first PCR encountered.
The problem with that was two-fold:
* It wouldn't really be the last PCR (it would be the first one within
  those last 640kB. In case of VBR files, this would put off duration
  and seek code slightly.
* It would fail on files with bitrates higher than 52Mbit/s (not common)

Instead this patch modifies that code by:
* Scanning over the last 2048kB (allows to cope with streams up to 160Mbit/s)
* Starts by the end of the file, going over chunks of 300 MPEG-TS packets
* Doesn't stop at the first PCR detected in a chunk, but instead records all
  of them, and only stop searching if there was "at least" one PCR within
  that chunk

This should improve duration reporting and seeking operations on VBR files

https://bugzilla.gnome.org/show_bug.cgi?id=708532
2014-12-01 15:04:25 +01:00
Edward Hervey
16fc431ada tsdemux: Only activate warning for real streams
streams with stream_type 0xff are PCR-only streams, it's normal not
to have a pad for them.
2014-12-01 13:31:21 +01:00
Ramprakash Jelari
f9e50eee58 mpegtspacketizer: Fix format string compiler warning 2014-11-24 13:34:21 +01:00
Matthieu Bouron
0b040b7131 mpegtsbase: do not remove programs on EOS
As a consequence, tsdemux won't remove its pads anymore on EOS.

Fixes the case when mpegtsbase is not able to process new packets
after EOS as the corresponding pids aren't known anymore because
the programs were removed and the pes/psi were kept, preventing the
PAT to be parsed again.

https://bugzilla.gnome.org/show_bug.cgi?id=738695
2014-10-30 16:28:40 +01:00
Jan Schmidt
068cba5df6 tsparse: Handle backward and discont timestamps better.
Assume that small backward PCR jumps are just from upstream packet
mis-ordering and don't reset timestamp tracking state - assuming that
things will be OK again shortly.

Make the threshold for detecting discont between sequential buffers
configurable and match the smoothing-latency setting on tsparse
to better cope with data bursts.
2014-10-29 23:02:50 +11:00
Jan Schmidt
a49ce685d1 tsparse: Implement timestamp/retimestamping of output buffers
When the set-timestamps property is set, use PCRs on the provided
(or autodetected) pcr-pid to apply (or replace) timestamps on the
output buffers, using piece-wise linear interpolation.

This allows tsparse to be used to stream an arbitrary mpeg-ts file,
or to smooth jittery reception timestamps from a network stream.

The reported latency is increased to match the smoothing latency if
necessary.
2014-10-29 23:02:50 +11:00
Tim-Philipp Müller
2cd4f5d0c1 tsdemux: send initial GAP event on sparse streams for faster startup with playbin
Signal sparse streams properly in stream-start event and force sending
of pending sticky events which have been stored on the pad already and
which otherwise would only be sent on the first buffer or serialized
event (which means very late in case of subtitle streams). Playsink in
playbin waits for stream-start or another serialized event, and if we
don't do this it will wait for the multiqueue to run full before
starting playback, which might take a couple of seconds.

https://bugzilla.gnome.org/show_bug.cgi?id=734040
2014-10-20 12:32:19 +02:00
Edward Hervey
b59a9262c0 tsdemux: GAP detection
All pads of a stream are now added at the beginning. In order to cope with
streams that don't get any data (forever or for a long time) we detect gaps
and push out GAP events when needed.

Cleanups and commenting by Jan Schmidt <jan@centricular.com>

https://bugzilla.gnome.org/show_bug.cgi?id=734040
2014-10-20 12:32:10 +02:00
Jesper Larsen
1b8e76d235 tsdemux: do not discard on discont if PES start
If a discontinuity in the stream is detected, data is discarded until
a new PES starts. If the first packet after the discontinuity is also
the start of a PES, there is no reason to discard the packets.

https://bugzilla.gnome.org/show_bug.cgi?id=737569
2014-09-29 11:41:01 +02:00
Aurélien Zanelli
77b850c08d tsdemux: fix trivial coding style issue
https://bugzilla.gnome.org/show_bug.cgi?id=736531
2014-09-12 11:31:59 +02:00
Aurélien Zanelli
6d767a09d8 tsdemux: fix overflow of packet_length field of PESHeader
packet_length is defined as a guint16 in the PESHeader structure. This
definition match the specification. But since we add 6 bytes to the
packet_length value (length of start_code + stream_id + packet_length),
we can overflow the guint16 when the value in the PES header is greater
than 65529.
So use a guint32 instead of a guint16 to avoid overflow.

https://bugzilla.gnome.org/show_bug.cgi?id=736490
2014-09-12 11:27:52 +02:00
Jesper Larsen
ff444dbf6d tsdemux: clear mutex resources in dispose
https://bugzilla.gnome.org/show_bug.cgi?id=736390
2014-09-10 18:53:47 +01:00
Thiago Santos
52257fe538 tsdemux: remove pads when resetting the element
Otherwise the pads will be there if it is restarted and the stream
can be a completely different one.

https://bugzilla.gnome.org/show_bug.cgi?id=734394
2014-08-19 00:02:33 -03:00