Otherwise upstream can get confused about offsets as there will
be a jump once the tags have been parsed due to the stripped area.
If upstream pulls from 0 to 100, and then tagdemux does the
tag reading and finds out that the first 200 bytes are the tag, the
next pull from upstream will have an offset of 200 bytes. So
upstream will get the following data:
0 - 100, 300 - (EOS), as it will continue requesting from where
it has last stopped, but tagdemux will add an offset to skip the
tags.
This patch makes sure that the tags have been parsed and skipped
since the first pull range call.
https://bugzilla.gnome.org/show_bug.cgi?id=744580
This reverts commit 19b9356680.
These two "profiles" are actually a complete set of profiles, which we will
need to handle separately. Unfortunately it seems like we need information
from the SPS to detect the exact profile.
The new gst_install_plugins_context_set_confirm_search() API can be used
to pass a hint to modify the behaviour of the external installer
process.
https://bugzilla.gnome.org/show_bug.cgi?id=744465
The new gst_install_plugins_context_set_desktop_id() and
gst_install_plugins_context_set_startup_notification_id() API can be
used to pass extra details to the external installer process.
https://bugzilla.gnome.org/show_bug.cgi?id=744465
These values are for now taken from x265 and need to be checked against
the spec. Especially we need to check if information from other fields
need to be taken into consideration too, e.g. the bit depth and chroma
index from the SPS.
This however makes 4:4:4 output of x265enc actually work.
Make a convenience function that combines 2 scalers to perform a 2d
scale. This removes quite a bit of overhead in method calls when doing a
typical scale and it also can reuse a piece of unused memory in the
vertical scaler.
Use the 2d scaler in video-converter and remove the other scalers and
temp memory.
Only merge scalers for selected formats.
Use nearest neighbour scaling for chroma when doing nearest neighbour
for the luma.
Also fastpath GRAY16_OE in nearest neighbour.
configure parameters correctly for packed fastpath.
Small performance tweaks for RGB and friends.
Add, but ifdef out, alternative nearest neighbour scaling, it is slower
than the current table based version.
Use memcpy instead of orc_memcpy because it is measurably faster.
Fix YUY2 and friends vertical scaling.
video-scaler.c:1331:14: error: variable 'func' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
} else if (bits == 16) {
^~~~~~~~~~
video-scaler.c:1348:3: note: uninitialized use occurs here
func (scale, src_lines, dest, dest_offset, width, n_elems);
^~~~
video-scaler.c:1331:10: note: remove the 'if' if its condition is always true
} else if (bits == 16) {
^~~~~~~~~~~~~~~~
video-scaler.c:1260:27: note: initialize the variable 'func' to silence this warning
GstVideoScalerVFunc func;
^
= NULL
video-converter.c:3406:12: error: implicit conversion from enumeration type 'GstVideoFormat' to different
enumeration type 'GstFormat' [-Werror,-Wenum-conversion]
format = convert->fformat[plane];
~ ^~~~~~~~~~~~~~~~~~~~~~~
video-converter.c:3413:44: error: implicit conversion from enumeration type 'GstFormat' to different enumeration
type 'GstVideoFormat' [-Werror,-Wenum-conversion]
gst_video_scaler_horizontal (h_scaler, format,
~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
video-converter.c:3471:12: error: implicit conversion from enumeration type 'GstVideoFormat' to different
enumeration type 'GstFormat' [-Werror,-Wenum-conversion]
format = convert->fformat[plane];
~ ^~~~~~~~~~~~~~~~~~~~~~~
video-converter.c:3487:42: error: implicit conversion from enumeration type 'GstFormat' to different enumeration
type 'GstVideoFormat' [-Werror,-Wenum-conversion]
gst_video_scaler_vertical (v_scaler, format, lines, d + out_x, i,
~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
video-converter.c:3551:12: error: implicit conversion from enumeration type 'GstVideoFormat' to different
enumeration type 'GstFormat' [-Werror,-Wenum-conversion]
format = convert->fformat[plane];
~ ^~~~~~~~~~~~~~~~~~~~~~~
video-converter.c:3569:46: error: implicit conversion from enumeration type 'GstFormat' to different enumeration
type 'GstVideoFormat' [-Werror,-Wenum-conversion]
gst_video_scaler_horizontal (h_scaler, format,
~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
video-converter.c:3577:42: error: implicit conversion from enumeration type 'GstFormat' to different enumeration
type 'GstVideoFormat' [-Werror,-Wenum-conversion]
gst_video_scaler_vertical (v_scaler, format, lines, d + out_x, i,
~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
In function gst_video_scaler_vertical() the bits variable is always
set to either 8 or 16 in every possible format. No need to initialize it.
If the format isn't valid it goes to no_func, so there is no need to
handle the case of bits not being 8 or 16.
CID #1268401
Add API to add and get custom headers that are not
covered by our header fields enum. This is backwards
compatible in that it will also work for our defined
fields, so if we ever add a new header field to the
enum, get_header_by_name() for the same header string
will still work.
API: gst_rtsp_message_add_header_by_name()
API: gst_rtsp_message_take_header_by_name()
API: gst_rtsp_message_remove_header_by_name()
API: gst_rtsp_message_get_header_by_name()
Add fastpaths for all planar conversion and scaling.
Improve gray and alpha handling.
Add option to specify the chroma resampler method and set to linear as
default.
video-converter.c:3645:24: error: implicit conversion from enumeration type
'GstFormat' to different enumeration type 'GstVideoFormat'
[-Werror,-Wenum-conversion]
convert->fformat = fformat;
~ ^~~~~~~
video-converter.c:3667:24: error: implicit conversion from enumeration type
'GstFormat' to different enumeration type 'GstVideoFormat'
[-Werror,-Wenum-conversion]
convert->fformat = fformat;
~ ^~~~~~~
video-converter.c:3963:50: error: implicit conversion from enumeration type
'const GstVideoFormat' to different enumeration type 'GstFormat'
[-Werror,-Wenum-conversion]
if (!setup_scale (convert, transforms[i].fformat))
~~~~~~~~~~~ ~~~~~~~~~~~~~~^~~~~~~
If we have timestamps on input buffers and are in trickmode no-audio
mode, then don't pass anything to the subclass for decode and simply
send gap events downstream
Only for forward playback for now - reverse requires accumulating
GAP events and pushing out in reverse order.
https://bugzilla.gnome.org/show_bug.cgi?id=735666
In trickmode no-audio mode, or when receiving a GAP buffer,
discard the contents and render as a GAP event instead.
Make sure when rendering a gap event that the ring buffer will
restart on PAUSED->PLAYING by setting the eos_rendering flag.
This mostly reverts commit 8557ee and replaces it. The problem
with the previous approach is that it hangs in wait_preroll()
on a PLAYING-PAUSED transition because it doesn't commit state
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=735666
The decoder can fail to drain on EOS if there was only one gather
set, because it will never have sent the segment event downstream
and set the output segment, and fail to detect that the rate < 0.0
Make sure to send pending events before sending all the gather data
for decode.
In gst_video_resampler_init () if method is GST_VIDEO_RESAMPLER_METHOD_NEAREST
then params.envelope is not initialized but still used later in line 382.
Make sure this variable is initiliazed to avoid undefined behaviour.
CID #1256568
Don't render out silence samples to a buffer, just
start the clock running, since any buffer with the
GAP flag will be discarded in render() now anyway.
Make the base audio sink throw away buffers marked GAP, or all
incoming buffers when performing a trick play with
GST_SEGMENT_TRICKMODE_NO_AUDIO flag set, and make sure to start
the ringbuffer when that happens so the clock starts running.
Preserve the timing calculations when rendering, so state is all
updated the same, but just don't render samples.
https://bugzilla.gnome.org/show_bug.cgi?id=735666
video-converter.c:3073:48: error: implicit conversion from enumeration type 'GstFormat' to different enumeration type 'GstVideoFormat'
[-Werror,-Wenum-conversion]
gst_video_scaler_horizontal (h_scaler, format,
~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
video-converter.c:3081:44: error: implicit conversion from enumeration type 'GstFormat' to different enumeration type 'GstVideoFormat'
[-Werror,-Wenum-conversion]
gst_video_scaler_vertical (v_scaler, format, lines, d, i, out_w);
~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
video-converter.c:3137:24: error: implicit conversion from enumeration type 'const GstVideoFormat' to different enumeration type 'GstFormat'
[-Werror,-Wenum-conversion]
convert->fformat = GST_VIDEO_INFO_FORMAT (in_info);
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../gst-libs/gst/video/video-info.h:125:43: note: expanded from macro 'GST_VIDEO_INFO_FORMAT'
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../gst-libs/gst/video/video-format.h:361:59: note: expanded from macro 'GST_VIDEO_FORMAT_INFO_FORMAT'
~~~~~~~~^~~~~~
video-converter.c:3157:24: error: implicit conversion from enumeration type 'GstVideoFormat' to different enumeration type 'GstFormat'
[-Werror,-Wenum-conversion]
convert->fformat = GST_VIDEO_FORMAT_GRAY8;
Add fast path scaling for YUY2 and other packed YUV formats. Add a new
method to merge the scalers of the Y and UV components into one scaler.
Add faster horizontal 2tap scaler.
See https://bugzilla.gnome.org/show_bug.cgi?id=741987
Some audio sink sub-classes (pulsesink) don't start their clock
when the ringbuffer starts, but always have to on EOS. When we
explicitly need to start the ringbuffer, make sure sub-classes will
do it by (ab)using the existing eos_rendering flag.
Add support for scaling of images with pstride == 1. This can be used
to scale individual planes later.
Rework some of the scaling code to take the pstride as a parameter.
CLAMP checks both if value is '< 0' and '> max'. Value will never be a negative
number since it is an unsigned integer. Removing that check and only checking if
it is bigger than max and setting it appropriately.
CID 1256559
CLAMP checks both if n_taps is '< 0' and '> max_taps'. n_taps will never be a
negative number because it is an unsigned integer. Removing that check and only
making sure it isn't set bigger than max.
CID 1256558
Add an option to disable chroma resampling.
Improve the matrix option values so that you can choose to use the input
or output matrix or disable conversion.
The gst_discoverer_info_get_missing_elements_installer_details()
documentation and annotation says that the return value should be freed
with g_strfreev(), but actually it's owned by the GstDiscovereInfo
object and should definitely not get freed by the caller as well.
https://bugzilla.gnome.org/show_bug.cgi?id=742006
Video buffer pool will update video alignment to respect stride alignment
requirement. But haven't updated it to video alignment in configure.
Which will cause user get wrong video alignment.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=741501
Otherwise calls to get the clock time might change its internal state
and the internal/external time for calibration get unbalanced leading to
a clock jump
https://bugzilla.gnome.org/show_bug.cgi?id=740834
This makes sure that the element is in the same state before start() is called
the very first time and every future call after the element was used already.
Also it ensure that we always have a clean state before start(), cleaned the
same way in every case.
The same was done already in the decoder, and we cleaned some state just above
manually that would also be taken care of by reset().
This makes sure that the element is in the same state before start() is called
the very first time and every future call after the element was used already.
The stop() vfunc might mess with some of our fields we have just
reset, which could cause memory leaks or invalid state taken over
to later.
Also the stop() vfunc, or anything called until it from another thread,
might want to be able to use the fields that were just resetted and
become confused because of that.
In the decoder we already had a workaround for things like this happening,
this workaround is not needed anymore.
The implementation of that vfunc might want to use the object lock for
something too. It's generally not a good idea to keep the object lock while
calling any function implemented elsewhere.
Also the ringbuffer can only be NULL at this point, remove a useless if block.
And in the sink actually hold the object lock while setting the ringbuffer on
the instance. Code accessing this is expected to use the object lock, so do it
here ourselves too.
Allows subclasses to do custom caps query replies.
Also exposes the standard caps query handler so subclasses can just
extend on top of it instead of reimplementing the caps query proxying.
Allows decoders to proxy downstream restrictions on caps.
Also implements accept-caps query to prevent regressions caused by the
new fields on the return of a caps query that would cause the accept-caps
to fail as it uses subset caps comparisons
