Wim Taymans
482dacfb54
session: handle NACK feedback and generate events
...
Handle and parse the feedback NACK packets and generate a Retransmission
event for each NACKed packet
2013-08-19 22:04:49 +02:00
Thibault Saunier
e47ffb203b
videomixer: Do not send flush_stop ourself after a flush_start
...
When we receive a flush_start, we should wait for the next flush_stop
and foward it, not create a flush_stop ourself.
2013-08-17 11:40:27 +02:00
Wim Taymans
db90f6e68d
h264depay: init debug category early
...
Init the debug variable when we register the element because it is also used by
the payloader element when it calls the add_sps_pps method.
2013-08-16 17:12:19 +02:00
Chris Bass
3e9dea3f8c
qtdemux: check denominator isn't zero before scaling duration.
...
When gst_qtdemux_configure_stream sets fps_d, check that n_samples is
non-zero before using it as a denominator to scale the stream duration.
https://bugzilla.gnome.org/show_bug.cgi?id=706076
2013-08-16 10:14:30 +02:00
Wim Taymans
f11c2c9b3b
jitterbuffer: forward flush before stopping dataflow
...
First forward the flush event and then stop our loop function.
2013-08-14 16:19:32 +02:00
Olivier Crête
4c6e636720
rtph264pay: Use the SPS/PPS handling function from the depayloader
...
Remove duplicated copies
https://bugzilla.gnome.org/show_bug.cgi?id=705553
2013-08-13 10:38:23 -04:00
Olivier Crête
742b90747d
rtph264depay: Make the SPS/PPS deduplication function generic
...
Make it not touch any internals of the depayloader
https://bugzilla.gnome.org/show_bug.cgi?id=705553
2013-08-13 10:38:23 -04:00
Chris Bass
b40bf67526
aacparse: allow conversion from raw AAC to ADTS
...
This patch will prepend ADTS headers to raw AAC audio frames, allowing
upstream elements to link to decoders that only support AAC in ADTS format.
Note that no error correction bits are added to ADTS frames in this code.
https://bugzilla.gnome.org/show_bug.cgi?id=615740
2013-08-13 15:58:23 +02:00
Sebastian Dröge
282afae244
rtspsrc: Only free GCheckSum after its last usage
...
https://bugzilla.gnome.org/show_bug.cgi?id=705760
2013-08-13 12:44:11 +02:00
Matej Knopp
2269ac8f28
qtdemux: elst should offset samples instead of buffers
...
The current approach where buffers are offset is not ideal, as during seek
and loop current time is compared to sample times.
https://bugzilla.gnome.org/show_bug.cgi?id=700264
2013-08-12 13:48:04 +02:00
Thibault Saunier
6c349d6ec3
videomixer: Send EOS if buf_end >= segment.stop
...
That means the whole segment is already played, and we are sure we
are EOS at that point.
Also handle segment seeks, and do not send EOS in that case.
2013-08-11 19:05:18 +02:00
Matej Knopp
96afba915a
avidemux: send proper stream_start event
...
https://bugzilla.gnome.org//show_bug.cgi?id=705449
2013-08-08 11:57:32 +02:00
Sebastian Dröge
9863e08839
matroskademux: Don't print warnings during flushing and stop as soon as possible
...
https://bugzilla.gnome.org//show_bug.cgi?id=705442
2013-08-08 11:53:15 +02:00
Tim-Philipp Müller
957c8e3e61
rtpvp8depay: mark key frames and delta frames properly
...
https://bugzilla.gnome.org/show_bug.cgi?id=705550
2013-08-07 11:14:38 +01:00
Wim Taymans
48174164eb
session: add NACK feedback in RTCP
2013-08-06 15:50:19 +02:00
Wim Taymans
4379ed1dee
source: add methods to register NACK
...
Add a method to register a missing packet for an ssrc along with
methods to get the missing packets and clear them.
2013-08-06 15:50:19 +02:00
Wim Taymans
50638b8106
session: handle Retransmission event and schedule NACK
...
Handle the retransmission event from downstream and use it to schedule a NACK
request.
2013-08-06 15:50:19 +02:00
Wim Taymans
0bddbd682d
session: pass data to remove func
...
Pass the data to the remove function because we are going to deref it when there
is pli or fir.
2013-08-06 15:50:19 +02:00
Thibault Saunier
38946bd9f4
qtdemux: Fix compilation
2013-08-06 15:31:38 +02:00
Thibault Saunier
593a31f2b4
qtdemux: Raw buffer DTS should always be CLOCK_TIME_NONE
2013-08-06 15:17:44 +02:00
Thibault Saunier
c5fa4666b7
videomixer: Make sure to send EOS if the buffer end time equals the segment end time
...
Otherwize EOS never gets sent in that particular case.
2013-08-06 12:21:33 +02:00
Sjoerd Simons
d14d4c436c
goom: Ensure src caps are writable
...
In some cases the src caps determined by goom weren't writable, causing
a bunch of assertion failures and failed caps. Fixed by always
explicitely making the caps writable
https://bugzilla.gnome.org/show_bug.cgi?id=705475
2013-08-05 15:33:39 +02:00
Wim Taymans
3c82de59f9
session: use common send_rtcp method
...
Reuse the send_rtcp method that already asks for the current time when
requesting a keyframe.
2013-08-05 15:02:59 +02:00
Wim Taymans
3c14c6021c
session: Don't use ClockTimeDiff for unsigned delays
2013-08-05 15:02:59 +02:00
Edward Hervey
4f4f6432cc
qtmux: Use buffer PTS if DTS is not set
...
Avoids ending up with completely bogus scaled duration/pts when new
buffers have invalid DTS.
2013-08-04 17:15:38 +02:00
Tim-Philipp Müller
7272dec5fe
rtpdec: use generic marshaller
2013-08-04 11:20:41 +01:00
Tim-Philipp Müller
fe098e3aff
udp: remove unused marshal and enumtypes files
2013-08-04 11:03:07 +01:00
Tim-Philipp Müller
7469cd3a4c
rtpmanager: use generic marshaller
2013-08-04 11:03:07 +01:00
Wim Taymans
7584f91f31
jitterbuffer: send event in right direction
2013-08-04 00:24:36 +02:00
Wim Taymans
9613e481ad
session: add FIR and PLI like other RTCP packets
...
Add the FIR and PLI packets like the other RTCP packet instead of from the
on-sending-rtcp default signal handler.
2013-08-03 00:33:24 +02:00
Wim Taymans
743e1b1191
jitterbuffer: fix property ranges
2013-08-02 17:22:55 +02:00
Wim Taymans
cd0164f4cc
jitterbuffer: push retransmission events
2013-08-02 16:43:59 +02:00
Wim Taymans
9a13267e85
jitterbuffer: add support for retransmission retry
...
When we didn't receive a packet after requesting retransmission, retry
asking for retransmission for a certain period.
2013-08-02 14:54:56 +02:00
Wim Taymans
e9ad5126db
jitterbuffer: add properties
...
Add properties to control retransmission parameters
2013-08-02 14:47:56 +02:00
Wim Taymans
a8c7ff7489
jitterbuffer: use corrected timeout when rescheduling
...
When we recalculate the timeout, use the corrected timeout value depending on
the timer type.
2013-08-02 12:44:58 +02:00
Wim Taymans
9c7e3e3455
jitterbuffer: update timers after queueing
...
Else we might update the timer needlessly for duplicates.
2013-08-02 12:43:00 +02:00
Wim Taymans
ebd6b8f8ab
jitterbuffer: move method up
2013-08-02 12:42:08 +02:00
Wim Taymans
f6b6797874
jitterbuffer: small cleanup
2013-08-02 06:28:32 +02:00
Wim Taymans
0e41414926
jitterbuffer: unschedule old expected packets
...
When we receive a new packet, unschedule old outstanding packets when their
seqnum is too far away.
2013-08-01 23:36:07 +02:00
Wim Taymans
70695466ed
jitterbuffer: refactor timer update
2013-08-01 23:32:00 +02:00
Wim Taymans
4ab3f5d3da
jitterbuffer: update timers when removing
...
Update the timers when we remove a timer.
Handle canceled timers, make them unschedule the current timer and
trigger the timeout code.
2013-08-01 23:24:29 +02:00
Wim Taymans
b983cf675b
jitterbuffer: fix typo
2013-08-01 23:22:02 +02:00
Wim Taymans
f3c658cbe6
jitterbuffer: improve timeout management
...
If we change the seqnum of an existing timer and we were waiting for
that timer, unschedule it. If we change the timeout of an existing timer and we
were waiting on it, only unschedule when the new time is smaller.
2013-08-01 15:40:52 +02:00
Wim Taymans
77e5d320ab
jitterbuffer: install timer for expected arrival
...
Install a timer that is triggered when the expected arrival time of a packet
expired.
2013-08-01 15:11:13 +02:00
Wim Taymans
f08d98404e
jitterbuffer: improve unschedule of timers
...
Conflicts:
gst/rtpmanager/gstrtpjitterbuffer.c
2013-08-01 14:57:11 +02:00
Wim Taymans
9d3b824e2a
jitterbuffer: move code around
2013-08-01 12:21:53 +02:00
Wim Taymans
fe32e80c92
jitterbuffer: estimate inter packet spacing
...
When we see two packets with consecutive seqnums and a different RTP time, use
the DTS difference as the inter packet spacing estimate.
2013-08-01 12:07:11 +02:00
Wim Taymans
255b7106f5
jitterbuffer: keep track of current timeout
2013-08-01 12:01:15 +02:00
Wim Taymans
7e43dba19b
jitterbuffer: cleanup timer handling
2013-08-01 11:49:10 +02:00
Wim Taymans
9d88ac9cbb
jitterbuffer: reset is only possible with a GAP
2013-08-01 11:40:41 +02:00
Wim Taymans
f864131227
jitterbuffer: operate on DTS
...
Make the jitterbuffer schedule the timeouts based on the DTS instead
of the PTS. This makes it all smoother with reordered frames and gives
the decoder time to reorder the frames in time.
2013-08-01 11:36:56 +02:00
Wim Taymans
80c5934290
jitterbuffer: rename timout variable
2013-08-01 11:14:12 +02:00
Wim Taymans
aa951433ee
jitterbuffer: small cleanup
2013-07-31 17:08:58 +02:00
Wim Taymans
69c78f72d5
jitterbuffer: block output in paused or buffering
2013-07-31 16:59:58 +02:00
Wim Taymans
4fbbc53a49
jitterbuffer: store pts in timer
...
Only store the pts in the timer so that we can both do timeouts with timings on
the input and output of the jitterbuffer.
2013-07-31 16:59:09 +02:00
Wim Taymans
77846d35c6
rtpjitterbuffer: refactor jitterbuffer
...
Refactor the jitterbuffer code. Make separate function for peeking a buffer,
pushing the next buffer, waiting for timeouts and handling the timeouts.
The main loop now tries to push as many buffers as it can until it runs out of
buffers or when it detects a seqnum discont. Then it will wait for some event to
happen before attempting to push more buffers.
Make methods to register timeouts in an array. These timeouts are registered
when we detect a missing packet, sync for the first packet or when we find an
estimation for the end-of-stream.
This greatly simplifies and clarifies the code and also makes it possible to
register more complicated timeout schemes later.
2013-07-30 23:24:23 +02:00
Wim Taymans
ea931d4f57
rtpjitterbuffer: use NULL to ignore percent
...
If we pass NULL to pop and push we ignore the percent result.
2013-07-30 23:24:23 +02:00
Wim Taymans
b3e8a85a54
jitterbuffer: refactor
...
Move eos estimation into separate function
2013-07-30 23:24:22 +02:00
Tim-Philipp Müller
a5532b4510
flvdemux: don't leak stream_id string
...
https://bugzilla.gnome.org/show_bug.cgi?id=705142
2013-07-30 14:28:19 +01:00
Sebastian Dröge
2e35b36aab
gst: Don't swap start/stop for negative rates in the SEGMENT query
2013-07-29 12:12:41 +02:00
Matej Knopp
47ed79fb1c
qtdemux: Check for data size when parsing h264 codec data from strf atom
2013-07-29 11:53:07 +02:00
Sebastian Dröge
722ef42196
matroskademux: Implement SEGMENT query
2013-07-29 10:53:54 +02:00
Sebastian Dröge
d135373beb
flvdemux: Implement SEGMENT query
2013-07-29 10:53:47 +02:00
Sebastian Dröge
4e78974c87
avidemux: Implement SEGMENT query
2013-07-29 10:50:59 +02:00
Matej Knopp
2dcdfe07f7
qtdemux: Support H264 fourcc
...
https://bugzilla.gnome.org/show_bug.cgi?id=704996
2013-07-29 09:11:39 +02:00
Sebastian Dröge
1fbb6d30a6
avidemux: Fix duration reporting in push mode
...
https://bugzilla.gnome.org/show_bug.cgi?id=700933
2013-07-28 17:38:56 +02:00
Sebastian Dröge
89a3dc2ecd
avidemux: Don't forget unmapping and unreffing buffer
2013-07-28 17:32:59 +02:00
Matej Knopp
1947587784
avidemux: unmap buffer
...
https://bugzilla.gnome.org/show_bug.cgi?id=704951
2013-07-28 17:32:59 +02:00
Wim Taymans
02359f9219
session: don't make buffer writable prematurely
...
There is no reason to make the SR buffer writable at this point. This is better
delayed until needed.
2013-07-26 22:31:41 +02:00
Wim Taymans
0261199fc4
session: ignore RTCP for inactive sources
2013-07-26 22:31:23 +02:00
Wim Taymans
a4b4ca53c0
session: small cleanup
2013-07-26 22:25:17 +02:00
Wim Taymans
e0abd2e9b5
session: handle partial RTCP report blocks
...
When we have more SSRCs to report than what fit in an RTCP packet, use a
generation counter to make sure all of them end up in a packet eventually.
2013-07-26 17:29:10 +02:00
Wim Taymans
6cce6fb04c
session: create SSRC before doing session cleanup
...
Make the internal source before we do session cleanup
2013-07-26 17:29:10 +02:00
Wim Taymans
5b0298c63e
session: reorganize the report block code
2013-07-26 17:29:10 +02:00
Matej Knopp
7335b81c47
matroskademux: fix memory leak in check_subtitle_buffer
...
https://bugzilla.gnome.org/show_bug.cgi?id=704921
2013-07-26 17:11:31 +02:00
Wim Taymans
3c44cd7c83
session: refactor active and sender checks
2013-07-26 14:21:40 +02:00
Wim Taymans
e952f7ba43
session: remove internal sources on timeout
...
When an internal source times out and becomes a receiver, remove it.
2013-07-26 12:18:01 +02:00
Wim Taymans
e9e2fe3950
session: create an internal source for RTCP
...
When we need to do RTCP and we don't have an internal source yet,
make one.
2013-07-26 12:18:01 +02:00
Wim Taymans
bd0709c15c
session: remove old code to change SSRC
...
Remove code used to change the SSRC after a collision. We now send
a RECONFIGURE event upstream to make the upstream element change the SSRC.
2013-07-26 12:18:01 +02:00
Wim Taymans
88f5a5f355
source: don't update packet SSRC
...
Remove the code to update the SSRC in packets, it can never be called now that
we always use a source with matching packet SSRC.
2013-07-26 12:18:01 +02:00
Wim Taymans
abc90da1dc
session: delay allocation of internal source
...
Allocate the internal source when we receive a caps with the SSRC or when we see
a buffer with the SSRC.
2013-07-26 12:18:01 +02:00
Wim Taymans
e0a1ce1291
session: generate reconfigure on collision
...
When we detect a collision, change the SSRC that we suggest upstream
and trigger RECONFIGURE. This should make upstream select a new SSRC.
2013-07-26 12:18:01 +02:00
Wim Taymans
495d43c089
session: produce RTCP for all internal sources
...
Loop over all the internal sources and produce RTCP. We also need
to queue the RTCP packets and send them when we are finished.
2013-07-26 12:18:00 +02:00
Wim Taymans
9505fd4150
session: deprecate internal source and ssrc properties
...
Deprecate the internal source and internal ssrc properties. There might
be more than one internal source.
2013-07-26 12:17:59 +02:00
Wim Taymans
3d6ee1fb5e
session: internal sources don't use probation
2013-07-26 12:17:59 +02:00
Wim Taymans
0e53e9109e
session: give caps to session
...
Let the session parse the caps and update its SSRC when needed.
2013-07-26 12:17:59 +02:00
Wim Taymans
c06482a2cb
session: make method to suggest available SSRC
...
Make a method to suggest the best available SSRC. This is the SSRC of the last
created internal source and is used to instruct upstream to produce this
SSRC.
2013-07-26 12:17:59 +02:00
Wim Taymans
33ce50e8b1
session: keep SDES and set on new internal sources
...
Keep track of the SDES ourselves and set it on all newly created
internal sources.
2013-07-26 12:17:59 +02:00
Wim Taymans
5652f02b76
session: make method to make internal sources
...
Add a method to obtain an internal source and use it to create
our internal source
2013-07-26 12:17:59 +02:00
Wim Taymans
7f83927c95
session: count internal sources and how many are senders
2013-07-26 12:17:58 +02:00
Wim Taymans
719343c206
rtpsession: separate BYE marking and scheduling
...
First mark sources with BYE and then schedule the BYE RTCP message.
2013-07-26 12:17:58 +02:00
Wim Taymans
391943ba82
session: get SSRC from RTCP packet itself
...
Get the SSRC from the RTCP packet instead.
2013-07-26 12:17:57 +02:00
Wim Taymans
a3f75a17ef
session: fix bandwidth calculation
...
We iterate over all sources and the internal one is also in the
hashtable so avoid adding it twice.
2013-07-26 12:17:57 +02:00
Wim Taymans
9eaef9d332
session: add some docs
2013-07-26 12:17:56 +02:00
Wim Taymans
2163355a47
session: Rearrange RTCP reporting a little
...
Make a function to generate an RTCP packet for a source, pass the source as a
parameter.
Move timeout of collisions to session cleanup phase.
2013-07-26 12:17:56 +02:00
Wim Taymans
a3bf374351
session: move check for is_early around
...
Move the check for the early RTCP to where it is needed and used.
2013-07-26 12:17:56 +02:00
Wim Taymans
b069db6a2e
session: parse packet outside of the session lock
2013-07-26 12:17:56 +02:00
Wim Taymans
57c27ec319
session: do nicer checks for internal sources
2013-07-26 12:17:56 +02:00
Wim Taymans
93d07298ff
session: let source keep track if it sent BYE
2013-07-26 12:17:56 +02:00
Wim Taymans
0c9c1434a8
source: reset more
2013-07-26 12:17:56 +02:00
Wim Taymans
1d02496d15
source: also use the source for bye_reason
...
Store the BYE reason in our internal source object. Rename the methods on the
source object a little because now the BYE can be received in RTCP or
set when the session wants to send BYE.
2013-07-26 12:17:56 +02:00
Wim Taymans
ddd071e54c
session: configure sdes with structure only
...
Remove code to configure the SDES with methods and types, only
allow configuration with GstStructure
2013-07-26 12:17:55 +02:00
Wim Taymans
0060e1d45d
session: refactor add and find source
...
Make functions to find and add a source to the hashtable.
2013-07-26 12:17:55 +02:00
Wim Taymans
adb0d68c07
session: remove source from sync_rtcp
...
We don't need to know the sender source of the session in the
callback, the SR packet is for all participants in the session.
2013-07-26 12:17:55 +02:00
Wim Taymans
bf7d8173b3
jitterbuffer: add some more debug
2013-07-26 12:17:55 +02:00
Vincent Penquerc'h
91d4abceaa
aacparse: allow conversion from ADTS to raw AAC
...
Some muxers (eg, qtmux) only support raw AAC, so this allows linking
an encoder that outputs ADTS only to those muxers.
The conversion is simple (omit the first 7 or 9 bytes of the frame),
but has to be done in pre_push instead of handle_frame as 1.0 does
not seem to allow skipping bytes there as 0.10 used to.
Other conversions are not supported (yet).
2013-07-26 09:44:11 +01:00
Vincent Penquerc'h
55e9338846
aacparse: fix object_type parsing off-by-one in ADTS frame
...
According to http://wiki.multimedia.cx/index.php?title=ADTS ,
the value stored in ADTS headers is one less than the object
type of the AAC stream.
A look at ffmpeg shows it also adds 1 to the value read off
the ADTS header.
Note that this might break other things that happen to have
an inverse off by one to match the existing code.
2013-07-26 09:44:10 +01:00
Thiago Santos
7eac4c7c03
avidemux: fix seqnum handling for seeks
...
Use the same seqnum as the seek for flushes/segments that are
caused by the seek. Also do the same for segment events
Fixes #676242
2013-07-25 15:24:31 -03:00
Thiago Santos
8bd12e12b3
matroskademux: fix seqnum handling for seeks
...
Use the same seqnum as the seek for flushes/segments that are
caused by the seek. Also do the same for segment events
Fixes #676242
2013-07-25 15:24:31 -03:00
Thiago Santos
e49b6e7c35
qtdemux: correctly handle seqnum for seeks and segments
...
Use the same seqnum on messages and events for derived events.
Fixed for flushes / stream-start / segment after a seek, and segment
after a segment.
Fixes #676242
2013-07-25 15:24:31 -03:00
Wim Taymans
c44a29bd53
bin: fix compilation
2013-07-24 14:17:45 +02:00
Wim Taymans
cc92ef1db2
vrawdepay: fix UYVP format
2013-07-24 12:42:31 +02:00
Wim Taymans
8191b6fcd2
vrawpay: fix UYVP format
2013-07-24 12:41:58 +02:00
Wim Taymans
37af93c361
vrawpay: fix caps
2013-07-24 12:41:44 +02:00
Wim Taymans
f87875e35b
rtpjitterbuffer: fix locking
...
Take the lock earlier so that we do things that follow with the right
locking.
2013-07-24 10:49:03 +02:00
Wim Taymans
dece8413ef
rtpsession: don't use invalid times in RTCP timeouts
...
An invalid timeout can be calculated when we disabled RTCP by setting the
bandwidth to 0. Make sure all code can handle this case.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674626
2013-07-23 17:41:48 +02:00
Wim Taymans
25e0f0d6b6
rtpsession: lock session when changing bandwidth
...
Take the session lock when changing the bandwidth properties so that we don't
end up with inconsistent behaviour.
2013-07-23 17:41:48 +02:00
Wim Taymans
c337265ee4
session: reset some RTCP variables
...
The early_send time was set to 0 and always triggering an early RTCP packet.
2013-07-23 17:41:48 +02:00
Edward Hervey
3d48d25756
qtdemux: Add all the mpeg XDCAM variants
...
This should cover all known XDCAM variants (which are all mpeg2 video)
Fixes #672227
2013-07-23 15:03:31 +02:00
Carlos Rafael Giani
95429f1d4b
rtpbin: added custom downstream sync event
...
rtpbin can now send a custom in-band downstream event which informs
downstream that the bin has received an RTCP SR packet. This is useful
for applications which want to drop the initial unsynchronized received
RTP packets.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703560
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
2013-07-23 06:25:20 +02:00
Tim-Philipp Müller
f18b1f7e80
deinterlace: fix on-the-fly changing of "mode" and "fields" properties
...
We call setcaps() to reconfigure ourselves, but we need to pass
the current *sink* caps, not the source caps then. Also fix a
caps leak.
https://bugzilla.gnome.org/show_bug.cgi?id=641599
2013-07-22 18:00:16 +01:00
Sebastian Dröge
0c2ff91a5c
wavparse: Add support for group-id in the stream-start event
2013-07-22 15:30:13 +02:00
Sebastian Dröge
169b490664
rtspsrc: Add support for group-id in the stream-start event
2013-07-22 15:30:13 +02:00
Sebastian Dröge
5a9f4a3cbc
rtpsession: Add support for group-id in the stream-start event
2013-07-22 15:30:13 +02:00
Sebastian Dröge
57dd1189d5
matroskademux: Add support for group-id in the stream-start event
2013-07-22 15:30:13 +02:00
Sebastian Dröge
1a0278ed64
qtdemux: Add support for group-id in the stream-start event
2013-07-22 15:30:13 +02:00
Sebastian Dröge
1122698491
flvdemux: Add support for group-id in the stream-start event
2013-07-22 15:30:12 +02:00
Sebastian Dröge
6cc16da531
avidemux: Add support for group-id in the stream-start event
2013-07-22 15:30:12 +02:00
Mathieu Duponchelle
d67a671bfb
videomixer: use gst_util_uint64_scale*_round.
...
There could be a case where:
1) you do a new set_caps after buffers have been processed.
2) ts_offset gets set to a different value, eg 0.033333333
3) your pads get EOS, but the check dor that doesn't work
because you use ts_offset + a truncated value < segment.stop
4) so in the next collected, you end up comparing for example:
0.9999999999 > 1., which is false and means you don't send EOS.
Also adds scale_round in two other places where it potentially could
have caused problems.
2013-07-21 19:21:57 -04:00
Olivier Crête
96a8fb92e2
qtdemux: Add WRLE support
2013-07-19 14:58:30 -04:00
Tim-Philipp Müller
aa7d597120
qtdemux: make files from Vivotek camera play
...
Skip tracks of 'vivo' subtype with empty stsd instead of
erroring out saying that the file is broken.
https://bugzilla.gnome.org/show_bug.cgi?id=699791
2013-07-19 19:38:30 +01:00
Tim-Philipp Müller
ce52b319ff
qtmux: when streaming don't try to seek when stopping
...
It might cause errors in sinks that are not seekable and
have reported this (like e.g. fdsink)
https://bugzilla.gnome.org/show_bug.cgi?id=696228
2013-07-19 17:31:38 +01:00
Wim Taymans
bdd3c31902
qtdemux: simplify some helpers
...
Some helper functions are not needed anymore or can be simplified.
2013-07-19 17:26:54 +02:00
Wim Taymans
61a8937ced
qtdemux: for non-raw video, move palette in caps
...
We only need to append the palette to raw video buffers, non-raw video has the
palette in the caps still.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704292
2013-07-19 17:14:46 +02:00
Arnaud Vrac
40ab78825c
qtdemux: nitpicking in esds parsing
2013-07-19 14:26:18 +02:00
Arnaud Vrac
d0d25a5e1f
qtdemux: set proper caps for mpeg-1 audio
...
Remove AAC specific fields from mpeg-1 audio caps, remove assumption
that the mpeg1 audio layer is 3, and set `parsed' field.
https://bugzilla.gnome.org/show_bug.cgi?id=704548
2013-07-19 14:26:08 +02:00
Arnaud Vrac
5def061d20
qtdemux: remove chapter stream
...
Remove all streams that are actually table of contents, since we will
never need the data after parsing them.
2013-07-18 11:48:12 +02:00
Arnaud Vrac
ae67c13416
qtdemux: send gap event for sparse streams in push mode
...
This allows to pre-roll at least if the next subtitle buffer
is far away.
2013-07-18 11:48:11 +02:00
Arnaud Vrac
1237898351
qtdemux: do not use indexes from sparse stream when seeking in push mode
...
This makes seeking more accurate in push mode, since the previous
keyframe on a sparse stream might be far away.
2013-07-18 11:48:11 +02:00
Arnaud Vrac
e561d12655
qtdemux: advertise subtitle streams as sparse
2013-07-18 11:48:11 +02:00
Arnaud Vrac
6e26f1d067
mastrokademux: do not push discont buffers if they aren't discont
...
Unset the discont flag instead of posssibly pushing a buffer with
a flag that's still set.
https://bugzilla.gnome.org/show_bug.cgi?id=682110
2013-07-17 18:10:11 +01:00
Wim Taymans
4c97701650
qtdemux: extract the palette from stsd
...
Sometimes a palette is inside the stsd, extract it instead of always using
the default one
2013-07-17 15:17:19 +02:00
Sebastian Dröge
9f73447229
goom2k1: Fix event handling and negotiate as soon as possible
2013-07-17 14:30:16 +02:00
Sebastian Dröge
78c7c16e9e
goom: Fix event handling and negotiate as soon as possible
2013-07-17 14:28:43 +02:00
Wim Taymans
6b82c89562
qtdemux: add support for WRAW
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704292
2013-07-17 09:57:17 +02:00
Wim Taymans
f698483bb3
qtdemux: palette is appended to buffers, not in caps
...
Fix the palette handling, in 1.0 we append the palette to the buffer instead of
placing it on the caps.
See also https://bugzilla.gnome.org/show_bug.cgi?id=704292
2013-07-17 09:57:16 +02:00
Olivier Crête
54c5a7f690
rtp: Use gst_adapter_take_buffer_fast() where possible in RTP payloaders
2013-07-16 15:37:49 -04:00
Arnaud Vrac
54bba4f60c
qtdemux: reset segment on flush stop
...
cca2f555d1
introduces a regression, where the demux segment is not
reset on flush stop, so the next upstream segment event will calculate
an invalid base time on the new segment to be sent downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=704255
2013-07-16 10:47:20 +02:00
Matej Knopp
ca32442f86
qtdemux: offset samples according to edit list
...
https://bugzilla.gnome.org/show_bug.cgi?id=700264
2013-07-15 09:59:23 +02:00
Matej Knopp
ae92ea21a1
aacparse: be less verbose when parsing LOAS streams
...
https://bugzilla.gnome.org/show_bug.cgi?id=704162
2013-07-15 07:55:08 +02:00
Matej Knopp
3111161e8a
qtdemux: unselect instead of ignoring disabled track, detect chapter track
...
https://bugzilla.gnome.org/show_bug.cgi?id=704007
2013-07-12 11:45:33 +02:00
Kyosuke Nekomura
4d517e94ef
audioecho: Fix handling of delay property in PLAYING/PAUSED state
...
https://bugzilla.gnome.org/show_bug.cgi?id=703901
2013-07-12 09:36:16 +02:00
Olivier Crête
3aa20e7c8d
rtpmux: Enable proxy caps on the src pads
2013-07-11 17:21:22 -04:00
Matej Knopp
7b69f427f1
qtdemux: correct argument order in gst_util_uint64_scale_int_round
...
https://bugzilla.gnome.org/show_bug.cgi?id=703350
2013-07-10 09:20:17 +02:00
Olivier Crête
1997acc8b2
rtpmux: Keep caps order from the peer or the filter
2013-07-09 17:43:31 -04:00
Sebastian Dröge
3d0988f46f
videomixer: Fix handling of buffers without a duration
...
We'll have to pop buffer from collectpads and store it
internally only to get the timestamp of the next buffer.
If we continue to keep it in collectpads, no new buffer
to calculate the end time will ever arrive.
https://bugzilla.gnome.org/show_bug.cgi?id=703743
2013-07-09 12:42:17 +02:00
Sebastian Dröge
9e9d2ce098
videomixer: Fix negotiation with 0/1 framerates
...
https://bugzilla.gnome.org/show_bug.cgi?id=703743
2013-07-09 11:53:28 +02:00
Jonas Holmberg
beebe2b7af
matroskademux: Unlock stream lock after use
...
Stream lock of sink pad was not unlocked after non-updating seek.
2013-07-09 11:25:14 +02:00
Ognyan Tonchev
aa2d96c46b
multipartmux: Re-set need_segment flag after FLUSH_STOP
...
https://bugzilla.gnome.org/show_bug.cgi?id=703182
2013-07-09 09:16:20 +02:00
Sebastian Dröge
0cc77d8e30
rtph263ppay: Don't pass upstream filter caps to downstream
...
Downstream usually can't accept video/x-h263 but only application/x-rtp,
so we would always get an empty intersection here.
https://bugzilla.gnome.org/show_bug.cgi?id=702632
2013-07-08 14:10:44 +02:00
Wim Taymans
ab24598443
rtspsrc: avoid some strdup
2013-07-02 11:13:25 +02:00
Wim Taymans
7c950ef3f2
rtspsrc: add select-stream signal
...
Add a signal to let the app select what streams will be selected.
See https://bugzilla.gnome.org/show_bug.cgi?id=634419
2013-07-02 10:40:35 +02:00
Wim Taymans
2d276e1bcb
rtspsrc: avoid strdup
2013-07-02 10:40:35 +02:00
J. Rick Ramstetter
f01b751e52
rtp: Fix documentation and comments to use rtpbin instead of old gstrtpbin
...
https://bugzilla.gnome.org/show_bug.cgi?id=703426
2013-07-02 10:12:17 +02:00
Wim Taymans
1db7e62060
rtspsrc: add signal to notify of the SDP
...
This way, the app can look and modify the SDP.
2013-07-01 17:31:30 +02:00
Matej Knopp
4053e1d6ac
qtdemux: compute framerate from average sample duration
...
https://bugzilla.gnome.org/show_bug.cgi?id=703350
2013-07-01 12:53:17 +02:00
Alban Browaeys
97015d3c93
flvdemux: Add flvversion 1 to the flash-video caps
...
This allows using avdec_flv which requires this field to be
present in the caps. FLV only supports flash-video version 1
right now.
https://bugzilla.gnome.org/show_bug.cgi?id=703076
2013-07-01 11:43:46 +02:00
Sebastian Dröge
5f6469fe2a
deinterleave: Don't hold object lock while sending events downstream
...
Based on a patch by Kishore Arepalli <kishore.arepalli@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=703114
2013-07-01 11:37:00 +02:00
Sebastian Dröge
75b5a54f17
matroskademux: Add MPEG4 video profile/level to the caps
2013-07-01 11:01:13 +02:00
Sebastian Dröge
423bddac6a
matroskademux: Add AAC profile/level to the caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=703312
2013-07-01 11:01:13 +02:00
Wim Taymans
c469434ea8
vorbispay: add support for config-interval
...
Align code with the theora payloader and add support for the config-interval to
periodically send out the config headers.
2013-06-28 15:21:56 +02:00
Wim Taymans
006562c9f4
theorapay: small cleanups
2013-06-28 15:21:12 +02:00
Wim Taymans
cdc66462ce
theorapay: handle streamheaders as well
2013-06-28 12:08:19 +02:00
Wim Taymans
3169432ed4
vorbispay: always collect headers on data
...
When we see a data packet, always check if we need to collect any previous
headers.
2013-06-28 12:07:58 +02:00
Wim Taymans
6c716dfc25
vorbispay: handle streamheader as well
...
Take config strings from the streamheader when we can
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=664312
2013-06-28 11:43:17 +02:00
David Svensson Fors
692206d3a7
rtph264pay: avoid double buffer unmap on error
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703171
2013-06-27 17:14:11 +02:00
Wim Taymans
3289a2963b
rtspsrc: reset-sync before play
...
Call reset-sync on the rtpbin before we go to playing. This makes us require SR
packets for all streams again before we attempt to sync them. If we don't reset,
it might be that we combine SR packets from before and after the PAUSE/PLAYING
state change and end up with huge bogus offsets.
2013-06-27 17:02:14 +02:00
Wim Taymans
519305d14d
jitterbuffer: improve sync on first packets
...
Don't throw away the first RTCP packet if it arrives before the first
RTP packet but remember and use it to signal sync once we get the
RTP packet.
See https://bugzilla.gnome.org/show_bug.cgi?id=691400
2013-06-27 16:23:20 +02:00
Wim Taymans
8969f00661
jitterbuffer: only signal loop when active
...
Only signal the loop function when it is active.
2013-06-27 16:15:45 +02:00
Wim Taymans
4bd2ffb26e
jitterbuffer: signal timestamp discont
...
We can now use the RESYNC buffer flag to mark a timestamp discont when we update
the ts-offset property.
2013-06-27 16:13:37 +02:00
Wim Taymans
4258ddcc36
jpegpay: turn some errors into warnings
...
Turn some errors into warnings, we can continue processing so this should
not be fatal.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=657079
2013-06-26 20:49:41 +02:00
Wim Taymans
bb9d42b976
rtspsrc: avoid some flushes
2013-06-26 14:58:53 +02:00
Wim Taymans
f39ef2ab68
rtspsrc: handle data message when waiting for reply
...
When we are waiting for a server reply, handle data messages instead of
ignoring them.
2013-06-26 14:41:36 +02:00
Wim Taymans
61219dc6ed
rtspsrc: handle data messages in separate method
...
Refactor and make a method to handle a data message.
2013-06-26 14:41:36 +02:00
Wim Taymans
a4be0c6de3
rtspsrc: add some more docs to handle-request signal
...
See https://bugzilla.gnome.org/show_bug.cgi?id=702705
2013-06-25 20:36:18 +02:00
Youness Alaoui
52e440c91b
Send a clock_provide message on the bus when we get a netclock
2013-06-25 14:50:47 +02:00
Youness Alaoui
547df8e14f
rtspsrc: Expose use-pipeline-clock property
2013-06-25 14:50:33 +02:00
Wim Taymans
35f6e79b94
udpsink: bind to the given interface
...
Actually call BINDTODEVICE to bind to the interface as given by the
property.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702819
2013-06-24 17:13:05 +02:00
Sebastian Dröge
3c9aba91dc
matroska: Add initial VP9 support
2013-06-21 18:22:13 +02:00
Youness Alaoui
95906b8f1c
rtsp: go back into the loop after doing pause
...
After we do a pause request, go back to loop mode so that we can listen
for server messages again.
See https://bugzilla.gnome.org/show_bug.cgi?id=702705
2013-06-21 10:42:20 +02:00
Olivier Crête
2cd6f53e24
rtpptdemux: Wait after the caps to forward the other events
...
First forward the stream-start, then the caps, then the rest
2013-06-20 23:16:59 -04:00
Wim Taymans
b96d931bf4
rtspsrc: fix race in state change to paused
...
When we go to paused, we first flush the connection and then send the pause
command. As a result of the flushing, the scheduled paused command can get
lost. Wait until the connection is completely flushed and the rtsp task is
waiting before issuing the paused or playing request.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702705
2013-06-20 14:43:47 +02:00
Wim Taymans
8428423c04
qtdemux: handle SEGMENT query
2013-06-20 11:31:22 +02:00
Kishore Arepalli
5b32891ae1
avidemux: duration query returns zero for DV video in avi
...
https://bugzilla.gnome.org/show_bug.cgi?id=702625
2013-06-19 11:17:22 +02:00
Sebastian Dröge
b001da2926
qtdemux: Disable usage of allocation queries
...
This can only reliably work if demuxers have a
separate streaming thread per srcpad. This should be
done in a demuxer base class, which integrates parts
of multiqueue
https://bugzilla.gnome.org/show_bug.cgi?id=701856
2013-06-19 11:07:48 +02:00
Alex Ashley
46a137c810
Avoid skipping moov atoms for fragmented MP4 files.
...
bug #700505
Following a representation change that causes a resolution change,
the video decoder fails to decode correctly. Dashdemux detects the
representation change and pushes a new caps event and an
initialization segment (a new moov atom) to the downstream qtdemux,
but it doesn't handle this new moov yet, it will only parse the
first one it receives.
This commit changes qtdemux to accept a new moov in a dash bitstream
switching scenario.
2013-06-19 01:44:22 -03:00
Thiago Santos
384e8f6c34
qtdemux: send stream-start only once for each stream
...
Do not send stream start again when reconfiguring a pad for new caps.
That is common for adaptive streams
2013-06-19 00:55:30 -03:00
Jens Georg
745be945ce
rtpmp2tdepay: accept mislabelled streams from GStreamer 0.10 as well
...
The mp2t payloader in 0.10 mislabelled the streams as MP2T-ES
instead of MP2T, so accept that as well for compatibility reasons.
https://bugzilla.gnome.org/show_bug.cgi?id=702457
2013-06-17 15:39:17 +01:00
Wim Taymans
d9bc48edc9
rtspsrc: manage element state ourselves
...
Lock the state of the all our elements and manage their states
outselves. Because we are working async, we can't rely on the state
change function to set the state at the right time or to return the
right return value from the state change function.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702046
2013-06-16 05:40:13 +02:00
Bruno Gonzalez
e89a48616b
matroskademux: Don't unlock stream lock without locking it first
...
https://bugzilla.gnome.org/show_bug.cgi?id=702167
2013-06-14 14:10:13 +02:00
Wim Taymans
51c9f7989f
rtpsession: Use the right hashtable to calculate bandwidth
...
Don't use an unused hashtable to iterate source to calculate bandwidth.
Remove unused code.
2013-06-13 16:02:19 +02:00
Sebastian Dröge
01cc493944
Revert "videomixer: When all sinkpads are eos, update output segment stop and forward it"
...
This reverts commit 2d3910fc79
.
It's not solving any problem and instead causes code to fall apart.
https://bugzilla.gnome.org/show_bug.cgi?id=701519
2013-06-12 18:25:59 +02:00
Tim-Philipp Müller
213cd2777b
matroskademux: mark subtitle streams as sparse in stream-start event
...
And also mark the streams that should be selected by default if
marked so in the headers.
https://bugzilla.gnome.org/show_bug.cgi?id=600648
2013-06-12 15:31:22 +01:00
Stefan Sauer
39c4c5f251
audiopanorama: add prebuilt files
2013-06-11 22:14:33 +02:00
Stefan Sauer
349a60e164
audiopanorama: cleanup of transform()
...
Only map input if we are reading it. Cleanup the logging and the comments a bit.
2013-06-11 21:48:18 +02:00
Stefan Sauer
1dc06932a2
audiopanorama: use orc to speedup processing
...
Use special variants for the case when we don't change the panorama (pan=0.0).
Simplify the processing functions by passing the panorama value directy instead
of the instance. Use orc for clearing buffers too.
2013-06-11 21:48:18 +02:00
Mathieu Duponchelle
6e23f1fec4
videomixer: check last end_time after conversion to running segment
...
The last end_time was saved after conversion, so the comparison
had to be made after conversion for it to make sense.
https://bugzilla.gnome.org/show_bug.cgi?id=701385
2013-06-11 21:03:35 +02:00
Mathieu Duponchelle
4243714301
videomixer: add mix->segment.start to output_end_time
...
When the segment start is not 0, this created a situation where
the output_end_time is inferior to output_start_time, and the duration
of the next buffer ended up underflowing.
https://bugzilla.gnome.org/show_bug.cgi?id=701385
2013-06-11 21:03:03 +02:00
Sebastian Dröge
e2b46a776f
matroskademux: Send stream headers after the segment event
...
https://bugzilla.gnome.org/show_bug.cgi?id=700799
2013-06-11 13:54:53 +02:00
Sebastian Dröge
adc9f0bd10
qtdemux: Do allocation query after exposing all pads and no-more-pads
...
Also configure video streams as early as possible.
Related https://bugzilla.gnome.org/show_bug.cgi?id=701856
but not fixing that.
2013-06-11 12:27:19 +02:00
Sebastian Dröge
ab275b62a8
flvdemux: Don't forward CAPS events from upstream
...
Just use the default pad event handler.
https://bugzilla.gnome.org/show_bug.cgi?id=701976
2013-06-11 12:27:19 +02:00
Stefan Sauer
4ef27eb0f9
audiopanorama: move the enum to the header and use instead of gint
...
Move the enum for the processing method to the header so that we can use the
type for the instance struct.
2013-06-09 20:39:48 +02:00
Sebastian Dröge
1ba08e331c
wavenc: Link with libgstbase for GstByteWriter
2013-06-07 15:15:15 +02:00
Sebastian Dröge
db1c2a28a6
wavparse: Push stream-start event in pull mode before anything else
2013-06-07 13:27:07 +02:00
Sebastian Dröge
048866f1b1
Release 1.1.1
2013-06-05 18:31:40 +02:00
Sebastian Dröge
ea75b890dc
wavenc: Fix taglist ref handling that made the unit test fail
2013-06-05 15:50:04 +02:00
Wim Taymans
0d27829a6b
udpsink: avoid leaking the host
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=701586
2013-06-05 12:14:01 +02:00
Thiago Santos
7c12435f9b
qtdemux: make sure taglist is writable before adding tags
...
Avoids assertions
2013-06-02 15:37:06 -03:00
Thiago Santos
78dfdee2aa
qtdemux: effectively skip tracks that weren't listed on the 1st moov
...
Without this, stream is NULL and the code will try to access it, leading
to segfaults.
2013-06-02 13:06:15 -03:00
Thiago Santos
70fca21c28
qtdemux: skip redundant check
...
!got_moov is already checked the line above
2013-06-02 13:06:15 -03:00
Stefan Sauer
bcf1bba689
level: remove unused variables in instance struct
2013-06-01 21:34:37 +02:00
Anton Belka
db29522a43
wavenc: add tags & toc support
...
Write tags as LIST INFO chunk. Format the toc as cue + LIST adtl chunk. Remove
old #ifdef'ed code.
2013-06-01 21:34:37 +02:00
Wim Taymans
1f0600ee6f
Revert "rtph264pay: Restructuring to allow for adding optional caps"
...
This reverts commit 61666898cf
.
This commit changes what the set_sps_pps() function does, not it doesn't
set caps anymore (and should have been renamed). The main problem is that
not all call sites are updated and thus leak the string.
2013-05-31 15:18:48 +02:00
Wim Taymans
1516c14881
Revert "rtph264pay/depay: Add frame dimensions a payloaded caps"
...
This reverts commit 3dca756a5d
.
The H264 RTP spec has no attributes for width and height.
2013-05-31 15:11:12 +02:00
Wim Taymans
b79d217396
Revert "rtph264pay/depay: Add optional framerate caps for use in SDP"
...
This reverts commit d8825e2a5c
.
There is no framerate attribute in the h264 RTP spec.
2013-05-31 15:09:51 +02:00
Wim Taymans
190b3d6688
Revert "rtpjpegpay/depay: Replace framesize caps with width/height"
...
This reverts commit 0075d111b4
.
Extra application/x-rtp are SDP fields, which are strings.
2013-05-31 15:08:16 +02:00
Wim Taymans
f870cef8bc
Revert "rtpjpegpay/depay: Replace framerate caps field with fraction"
...
This reverts commit 9fd25a810b
.
We deal with sdp attributes in application/sdp, which are always strings.
2013-05-31 15:05:51 +02:00
Wim Taymans
25082a50b9
rtspsrc: add extra TLS url protocols
...
We also support TLS protocols now.
2013-05-31 12:34:22 +02:00
Sebastian Dröge
e2e1d1a158
videomixer: Add FIXME comment about the DURATION query from adder
...
Currently the code just takes with maximum upstream duration, which
is wrong. It should be the maximum upstream duration in running time.
2013-05-30 23:56:38 +02:00
Mathieu Duponchelle
5223868caa
videomixer: Set a reference to mix->current_caps as the QUERY_CAPS result.
2013-05-30 15:36:48 -04:00
Stefan Sauer
6feaf69bec
level: misc cleanups
...
Fix some oudated comments. Sort out some confusion of interval_frames and num_frames.
2013-05-30 17:38:55 +02:00
Stefan Sauer
52282b5faa
level: fix discontinuities in timestamps
2013-05-28 19:09:12 +02:00
Wim Taymans
80850df711
rtspsrc: create and push stream-start in TCP mode
2013-05-28 15:45:49 +02:00
Wim Taymans
4fc1f3088b
rtspsrc: remove some obsolete code
...
It is not needed to do a state change from the _play() function on
ourselves. The state change function already did that and we don't want to
interfere with that (or use hacks to avoid interference).
2013-05-28 15:10:07 +02:00
Wim Taymans
e6f850996b
rtspsrc: set RTCP caps on the RTCP pads
2013-05-28 12:26:25 +02:00
Wim Taymans
63f0ecbbe7
rtpsession: send stream-start and segment events
...
Also send stream-start and segment event on the RTCP pad.
We don't need to send anything on the sync_src pad because we
already forwarded all incomming events.
2013-05-28 12:26:25 +02:00
Wim Taymans
779bcc093c
rtspsrc: add signal to handle server requests
...
Add a signal to be notified of a server request. The signal handler can then
construct the response message for the server.
See https://bugzilla.gnome.org/show_bug.cgi?id=632207
2013-05-28 12:26:24 +02:00
Nicolas Dufresne
cd30a81ee3
videomixer: Maintain z-order when new pad are added
...
https://bugzilla.gnome.org/show_bug.cgi?id=701109
2013-05-27 22:43:25 -04:00
Thibault Saunier
7a3df1ab31
videomixer: Always handle flush_stop_pending atomically
...
It is not protected with the COLLECT_PADS_STREAM_LOCK anymore
2013-05-25 12:20:08 -04:00
Thibault Saunier
608bd3e2db
videomixer: Do not take COLLECT_PADS_STREAM_LOCK when unnecessary
...
Collectpad takes the lock itself when receiving serialized events
and we should not take it for not serialized ones
2013-05-25 11:03:31 -04:00
Sebastian Dröge
1b5a8ac41c
flxdec: Properly skip non-frame chunks
2013-05-24 19:34:05 +02:00
Sebastian Dröge
ae3ee32f42
flxdec: Flush data from adapter after reading it
...
Otherwise we're going in an infinite loop, reading the same data
over and over again.
2013-05-24 19:31:14 +02:00
Andoni Morales Alastruey
a62af107ae
goom2k1: fix more duplicated symbols
2013-05-24 09:29:23 +02:00
Sebastian Rasmussen
9fd25a810b
rtpjpegpay/depay: Replace framerate caps field with fraction
...
The previous implementation had the formatting of SDP attributes happen
in each RTP payloader, now instead the constituent values are propagated
as caps fields. This allows for applications to do SDP offer/answer
based on caps negotiation.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700748
2013-05-23 21:05:49 +02:00
Sebastian Rasmussen
0075d111b4
rtpjpegpay/depay: Replace framesize caps with width/height
...
The previous implementation had the formatting of SDP attributes happen
in each RTP payloader, now instead the constituent values are propagated
as caps fields. This allows for applications to do SDP offer/answer
based on caps negotiation.
Keep parsing a-framerate, x-framerate and x-dimensions in rtpjpegdepay
to be backwards compatible with previous payloaders.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700748
2013-05-23 21:05:43 +02:00
Sebastian Rasmussen
d8825e2a5c
rtph264pay/depay: Add optional framerate caps for use in SDP
...
This allows for applications to format SDP attributes and still do SDP
offer/answer based on caps negotiation.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700749
2013-05-23 21:04:17 +02:00
Sebastian Rasmussen
3dca756a5d
rtph264pay/depay: Add frame dimensions a payloaded caps
...
This allows for applications to format SDP attributes and still do SDP
offer/answer based on caps negotiation.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700749
2013-05-23 21:04:11 +02:00
Sebastian Rasmussen
61666898cf
rtph264pay: Restructuring to allow for adding optional caps
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700749
2013-05-23 21:04:00 +02:00
Sebastian Dröge
e26b8c2832
(dyn|multi)udpsink: Add properties to specify the bind address and port
...
By default we use the any addresses and a random port for binding the socket.
2013-05-23 18:42:09 +02:00
Sebastian Dröge
5b79b8ff3c
(dyn|multi)udpsink: Bind socket before using it
...
https://bugzilla.gnome.org/show_bug.cgi?id=700878
2013-05-23 18:05:07 +02:00
Sebastian Dröge
1ed7f7a6a8
(multi)udpsink: Add missing getters for socket-v6 and used-socket-v6 properties
2013-05-23 17:26:31 +02:00
Nicolas Dufresne
d8c5e31657
videomixer: Don't hold stream-lock while pushing non-serialized events
...
https://bugzilla.gnome.org/show_bug.cgi?id=700868
2013-05-23 09:20:04 -04:00
Nicolas Dufresne
a7e0f251ca
videomixer: Don't hold object lock while sending events
...
https://bugzilla.gnome.org/show_bug.cgi?id=700868
2013-05-23 09:20:04 -04:00
Sebastian Dröge
ecc6c607ff
deinterlace: The return value of gst_pad_set_caps() is not relevant anymore
...
Caps can fail to be set because the pad is not linked yet for example.
2013-05-22 17:34:07 +02:00
David Schleef
318cd39c3e
qtdemux: Add error if file has playready drm
2013-05-21 18:21:49 -07:00
Thibault Saunier
18ef4f18d0
videomixer: Send a reconfigure event upstream if sinkpad caps are not usable
...
https://bugzilla.gnome.org/show_bug.cgi?id=684237
2013-05-21 12:15:36 -04:00
Alexander Schrab
a1df050356
mulawdec: Handle NULL buffers in handle_frame
...
https://bugzilla.gnome.org/show_bug.cgi?id=698894
2013-05-21 15:18:04 +02:00
Sebastian Rasmussen
2361567bae
rtpjpegpay/depay: Add framesize caps for use in SDP
...
The format of the value adheres to RFC6064 and it is meant to be parsed
and included in the SDP sent by gst-rtsp-server to its clients.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700748
2013-05-21 09:09:03 +02:00
Sebastian Rasmussen
919eed0787
rtpjpegpay: Add optional framerate caps for use in SDP
...
The format of the value adheres to RFC4566 and it is meant to be parsed
and included in the SDP sent by gst-rtsp-server to its clients.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700748
2013-05-21 09:08:21 +02:00
Mathieu Duponchelle
2d3910fc79
videomixer: When all sinkpads are eos, update output segment stop and forward it
...
https://bugzilla.gnome.org/show_bug.cgi?id=699793
2013-05-20 21:06:56 +02:00
Mathieu Duponchelle
521c9a7b5d
videomixer: Don't reset the output segment on flush stop
...
Only init it when getting from READY to PAUSED, and change it on seek events.
https://bugzilla.gnome.org/show_bug.cgi?id=699793
2013-05-20 21:03:03 +02:00
Thibault Saunier
86b106091c
videomixer: Send caps event from the streaming thread
...
This way we avoid races in caps negotiation and we make sure
that the caps are sent after stream-start.
https://bugzilla.gnome.org/show_bug.cgi?id=684237
2013-05-19 09:28:04 -04:00
Thibault Saunier
718f9004d0
videomixer: Do not send flush_stop when receiving a seek
...
There is no reason to send a flush-stop when receiving a seek event.
In the case of a flushing seek, we could eventually want to, but in
the code path were we check if the seek is "flushing", we have the
following comment that makes sense:
"we can't send FLUSH_STOP here since upstream could start pushing data
after we unlock mix->collect.
We set flush_stop_pending to TRUE instead and send FLUSH_STOP after
forwarding the seek upstream or from gst_videomixer_collected,
whichever happens first."
https://bugzilla.gnome.org/show_bug.cgi?id=684237
2013-05-19 09:28:04 -04:00
Thibault Saunier
85b6852deb
videomixer2: Protect flush_stop_pending with the collectpad stream lock
...
And make sure to expect a flush-stop after a flush-start
https://bugzilla.gnome.org/show_bug.cgi?id=684237
2013-05-19 09:28:04 -04:00
Michael Olbrich
d1c56376d6
rtpmp4apay: clear config buffer before using it
...
This is necessary because parts of the memory are only modified with "|="
https://bugzilla.gnome.org/show_bug.cgi?id=700514
2013-05-18 10:57:56 +01:00
Thiago Santos
55caa99ccd
qtdemux: Do not expect EOS after a segment event if upstream is mss
...
In case qtdemux is handling a mss stream, do not mark the stream to wait
for EOS after a segment. Even if it seems to be the last one according to
the current streams information.
MSS handling is different here because there is another demuxer driving
the pipeline
2013-05-16 16:50:49 -03:00
Thiago Santos
5517e352ab
qtdemux: only set channels and rate if qtdemux knows it
...
Setting both of those to 0 is pointless and means that qtdemux
doesn't know the real value. Avoid setting it in this case.
2013-05-16 16:50:49 -03:00
Arnaud Vrac
6edcc564ba
qtdemux: set alac caps using info from codec buffer
...
The samplerate field in the STSD atom is not right for some ALAC files
(usually when audio is 96kHz/24bits), so the audio caps must be
extracted from the codec data.
https://bugzilla.gnome.org/show_bug.cgi?id=700382
2013-05-15 18:42:11 +01:00
Arnaud Vrac
8ed611cdbc
avidemux: do not push discont buffers if they aren't discont
...
https://bugzilla.gnome.org/show_bug.cgi?id=682110
2013-05-15 13:16:11 +01:00
Joshua M. Doe
837dcfb363
videocrop: Add support for GRAY16_LE/GRAY16_BE
...
https://bugzilla.gnome.org/show_bug.cgi?id=700331
2013-05-15 09:29:30 +02:00
Sebastian Dröge
41e1af3751
rgvolume: Send all events through the proxypads instead of just sending to the target
...
Otherwise the sticky events are missing on the proxypads.
2013-05-14 17:29:58 +02:00
Sebastian Dröge
4fdbf88a65
matroskaparse: Make sure to send a segment event before dataflow
2013-05-14 13:52:18 +02:00
Sebastian Dröge
5c8bb90262
deinterlace: Improve handling of min/max buffer numbers of the buffer pool
2013-05-14 09:45:12 +02:00
Matej Knopp
30c00f4fb7
deinterlace: set caps for buffer pool config
2013-05-14 09:38:24 +02:00
Olivier Crête
4f0fdabf10
multifilesink: Let the base class do get_times
...
This will make sync=TRUE work, the default is still sync=FALSE
2013-05-13 13:34:22 -04:00
Nicolas Dufresne
f67c227878
interleave: Send stream-start before caps event
2013-05-13 15:37:38 +02:00
Nicolas Dufresne
04c9f43567
rtpmux: Send stream-start before caps
2013-05-13 15:37:05 +02:00
Sebastian Dröge
6dee7d3a06
icydemux: Fix sticky event handling
2013-05-13 15:19:25 +02:00
Sebastian Dröge
9ac456bd43
flvmux: Push sticky events in the right order
2013-05-13 15:06:03 +02:00
Sebastian Dröge
0ab23ef5c9
deinterleave: Fix sticky event handling
2013-05-13 14:54:35 +02:00
Sebastian Dröge
c94fbf6206
deinterleave: Code style fixes
2013-05-13 13:55:44 +02:00
Sebastian Dröge
f28ab45f3e
rtpgstpay: First let baseclass handle events, then put them into the stream
...
Fixes handling of sticky events.
https://bugzilla.gnome.org/show_bug.cgi?id=700213
2013-05-13 13:44:35 +02:00
Tim-Philipp Müller
8359b6bff1
multipartdemux: fix example pipeline
...
Need jpegparse.
2013-05-10 14:01:14 +01:00
Nicolas Dufresne
0b737fba0d
shapewipe: Can't map twice the same buffer for writing
...
I took the opportunity to simplify that code a bit. We now use
gst_buffer_make_writable() to make the buffer writable and map twice the
same buffer, with first map being read/write, and second read only. This
get rid of the critical:
GStreamer-CRITICAL **: gst_structure_set_name: assertion `IS_MUTABLE
https://bugzilla.gnome.org/show_bug.cgi?id=700044
2013-05-10 09:27:02 +02:00
Nicolas Dufresne
13a5d0304d
shapewipe: Ensure caps are writable
...
The exist one case where that we endup with original caps in ret, in which
case we are not guaratied to have writable caps. Simply ensure this is the
caps are writable before entering the loop.
https://bugzilla.gnome.org/show_bug.cgi?id=700044
2013-05-10 09:26:07 +02:00
Nicolas Dufresne
59c2f459de
shapewipe: Fix sample pipeline in documentation
...
https://bugzilla.gnome.org/show_bug.cgi?id=700044
2013-05-10 09:26:00 +02:00
Sebastian Dröge
3110b7cc31
Revert "videomixer2: Take into account new segments"
...
This reverts commit 84ae670ab4
.
Actually this is not how it is supposed to work. videomixer
creates a [0,-1] segment and then puts frames of the different
streams there based on their running times in their own segments.
2013-05-09 16:26:19 +02:00
Mathieu Duponchelle
84ae670ab4
videomixer2: Take into account new segments
...
Also forward the event downstream on the next opportunity.
https://bugzilla.gnome.org/show_bug.cgi?id=699793
2013-05-09 16:18:54 +02:00
Tim-Philipp Müller
643450c9b8
Revert "gstrtspsrc: set buffer-size for multicast buffers"
...
This reverts commit 2481e95d03
.
This is already done five lines above, it was added a year
ago in commit 561b131e
.
2013-05-09 09:09:59 +01:00
Nicolas Dufresne
2d53229a86
audiowsinclimit: Frequence property renamed cutoff
...
Updating the documentation to reflect this change.
See: https://bugzilla.gnome.org/show_bug.cgi?id=699964
2013-05-09 08:46:04 +02:00
Aha Unsworth
2481e95d03
gstrtspsrc: set buffer-size for multicast buffers
...
For receiving video data via RTSP when the video is sent via
multicast there is no way to specify the udpsrc buffer-size.
On windows the native network buffer is not large and with video
i-frames being huge the buffer is to small and you get i-frame corruption,
it looks terrible, and there is no (easy) way to set the udpsrc buffer-size.
https://bugs.freedesktop.org/show_bug.cgi?id=52264
2013-05-08 16:57:53 -03:00
Sebastian Dröge
1588cda9a1
videomixer2: Send stream-start before caps event
...
https://bugzilla.gnome.org/show_bug.cgi?id=699895
2013-05-08 16:02:46 +02:00
Thiago Santos
a0e934e72e
qtdemux: push new caps events when caps change
...
Whenever the demuxer has a new caps on a stream, it should set the
new_caps variable to true and a new caps event will be pushed before
the next buffer
2013-05-07 19:29:17 -03:00
Thiago Santos
725faab590
qtdemux: do not push discont buffers if they aren't discont
...
qtdemux takes its buffers from a GstAdapter. Those buffers are created
from the larger buffer that it obtained from upstream and they carry
the same flags, including DISCONT if it is set. In these cases, all
buffers that qtdemux is going to push would be marked as DISCONT.
This scenario can make parsers/decoders flush on every buffer leading
to no decoding at all hapenning. This patch prevents this by unsetting
the flag if it shouldn't be set.
2013-05-07 19:29:17 -03:00
Thiago Santos
4d073beeee
qtdemux: some code cleanup for mss handling code
...
* Explicitly init variables for fragmented formats at init
* Do not use GstClockTime type if the variable isn't a timestamp
* Fix a style/readability issue at an if block
* Group 2 mss mode conditional blocks together to improve readability
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:29:17 -03:00
Thiago Santos
d1b91c755c
qtdemux: avoid storing non-time newsegments to push later
...
This can confuse downstream when they get a byte segment after receiving
the natural time segment from qtdemux that it sends when starting to
push buffers. This is specially the case with parsers that try to
convert the position from byte to time format and might miss the
correct position for playback to start.
2013-05-07 19:29:17 -03:00
Thiago Santos
895525b5cb
qtdemux: avoid setting fields to non-writable caps
2013-05-07 19:29:17 -03:00
Wim Taymans
544d926732
qtdemux: don't send so many segment events
...
Only send one segment event in the beginning of the stream, not
after each moov and moof atom.
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:29:17 -03:00
Wim Taymans
d9cd4fcc17
qtdemux: place incomming timestamps on output
...
Place the incomming timestamp (if any) directly onto the outgoing buffers
and interpollate other timestamps.
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:29:17 -03:00
Thiago Santos
cca2f555d1
qtdemux: improve reset of internal status
...
Reset different variables on state changes to ready and when
handling a flush-stop. For handling flush stops we should check
if there is an upstream adaptive demuxer driving the pipeline as this
means that qtdemux will get a new moov atom. For 'standard' isomedia
streams this isn't true and qtdemux should keep the previous moov
information around.
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:29:17 -03:00
Thiago Santos
6c69e59677
qtdemux: prepare qtdemux to accept multiple dash moovs in a row
...
Whenever dashdemux switches bitrates it sends a new moov with the
new stream configuration. qtdemux should now handle this by splitting
the exposing and configuration of streams into separate functions. When
the stream is new it is configured and exposed, when it is a new bitrate
of an existing stream it is only reconfigured.
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:25:30 -03:00
Andre Moreira Magalhaes (andrunko)
2a7d3d1598
qtdemux: Move FLUSH_STOP/PAUSED_TO_READY handling to a reset method.
...
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:18:03 -03:00
Louis-Francis Ratté-Boulianne
d499b461da
qtdemux: Remove old pads when exposing streams and other general fixes.
...
Conflicts:
gst/isomp4/qtdemux.c
2013-05-07 19:18:03 -03:00
Thiago Santos
a3c19eeea1
qtdemux: handle mss streams
...
smoothstreaming streams should be handled as a special kind of
fragmented isomedia. In MSS the fragments will not contain a
'moov' atom with the media descriptions, this has to be extracted
from the caps.
Additionally, there should be another demuxer upstream that is likely
going to be the one to answer/act on queries and events, so qtdemux has
to forward those upstream.
2013-05-07 19:18:03 -03:00
Sebastian Rasmussen
9532b04947
rtpgstpay: fix invalid memory access in event handler
...
First process event in payloader, then hand it to the
base class which takes ownership of the event.
https://bugzilla.gnome.org/show_bug.cgi?id=699637
2013-05-04 10:49:23 +01:00
Tim-Philipp Müller
68ac392e8f
ac3parse, dcaparse: check buffer size before trimming
...
and unref old buffer as soon as possible.
2013-05-04 10:08:47 +01:00
Andoni Morales Alastruey
3462282b83
dcaparse: add support for "audio/x-private1-dts"
2013-05-03 13:44:23 +02:00
Andoni Morales Alastruey
4531381541
ac3parse: add support for "audio/x-private1-ac3"
2013-05-03 13:44:23 +02:00
Andoni Morales Alastruey
4a78a77e65
rtp: fix duplicated symbols with libvpx
2013-05-02 14:03:33 +02:00
Andoni Morales Alastruey
584fdbad84
goom2k1: fix duplicated symbols with goom
2013-05-02 14:03:26 +02:00
Sebastian Dröge
ae05ed4f05
rtph264pay: If the adapter is empty on EOS don't try to map its content
...
https://bugzilla.gnome.org/show_bug.cgi?id=699314
2013-05-01 15:49:45 +02:00
Ognyan Tonchev
0584d5c4c9
matroskademux: add stream-format=raw to aac caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=699303
2013-05-01 15:47:15 +02:00
Tim-Philipp Müller
7ccb387e85
udp: log WARNING debug message if UDP multicast is likely to be broken
2013-04-27 11:25:12 +01:00
Tim-Philipp Müller
4273eccace
udpsrc: add includes to get socklen_t defined on Windows
...
https://bugzilla.gnome.org/show_bug.cgi?id=692400
2013-04-27 11:16:54 +01:00
Yury Delendik
4bc06859d1
qtdemux: add support for VP6F VP6 flash codec
...
https://bugzilla.gnome.org/show_bug.cgi?id=699010
2013-04-27 09:39:45 +01:00
Edward Hervey
3e5ad52c0d
monoscope: Fix debug statement
2013-04-26 12:16:49 +02:00
Alexander Schrab
3ec9673dfc
mulawdec: change base class to GstAudioDecoder
...
https://bugzilla.gnome.org/show_bug.cgi?id=698894
2013-04-26 08:46:34 +02:00
Mathieu Duponchelle
6b153ce385
videomixer: send stream-start event.
2013-04-25 16:09:34 -03:00
Wim Taymans
1df2e623b5
docs: add some pay/depayloaders
...
See https://bugzilla.gnome.org/show_bug.cgi?id=551631
2013-04-25 14:05:55 +02:00
Sebastian Dröge
fb0384fa0d
mulaw: Some minor memleak fixes and cleanup
2013-04-25 12:44:15 +02:00
Alexander Schrab
f0edb5fb70
mulawenc: change to gstaudioencoder base, added bitrate tags
2013-04-25 12:36:15 +02:00
Sebastian Dröge
b1af93f791
(multi)udpsink: Use separate sockets for IPv4 and IPv6
...
https://bugzilla.gnome.org/show_bug.cgi?id=534243
2013-04-25 12:12:23 +02:00
Sebastian Dröge
0b552150ce
dynudpsink: Use separate sockets for IPv4 and IPv6
...
https://bugzilla.gnome.org/show_bug.cgi?id=534243
2013-04-25 12:09:27 +02:00
Sebastian Dröge
ed8ea46424
udp: Don't include removed gstudp.h in noinst_HEADERS
2013-04-25 10:43:56 +02:00
Sebastian Dröge
afb284e3a9
udp: Remove unused enum type
2013-04-25 09:16:14 +02:00
Sebastian Dröge
a957457cc1
udp: Use the generic marshaller instead of generating marshallers
2013-04-25 09:13:51 +02:00
Sebastian Dröge
07d3363436
udpsrc: Rename instance variable from host to multi_group
...
This is more consistent as it's used for the multicast-group property.
2013-04-25 09:07:41 +02:00
Sebastian Dröge
427673d283
udpsrc: Add bind-address property
...
This is equivalent to multicast-group currently for backwards compatibility.
In 2.0 this should be handled separately, the former only being the multicast
group and the latter always being the address the socket is bound to, even if
a multicast group is given.
2013-04-25 09:05:12 +02:00
Wim Taymans
5ba3fd3c63
vrawdepay: return output buffer from process
...
Return the output buffer from the process function instead of pushing
it ourselves. This way, the subclass can actually deal with the return
value of the push.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=693727
2013-04-24 16:24:25 +02:00
Wim Taymans
eac9efb92e
rtp: a marker bit should translate to RESYNC
...
A marker bit on an audio packet does not mean a DISCONT (in the GStreamer sense
of missing data) but it means that the packet is the end of a talkspurt and thus
a good opportunity to resync to the clock. Use the RESYNC buffer flag to note
this.
Real discontinuities are marked with DISCONT still when the seqnum has a GAP or
when the input buffer has the DISCONT flag set.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=627204
2013-04-24 15:42:45 +02:00
Sebastian Dröge
fdb667ae00
rtpjpegdepay: Drop frame if it's less than 2 bytes large
...
https://bugzilla.gnome.org/show_bug.cgi?id=677560
2013-04-22 10:19:29 +02:00
Sreerenj Balachandran
504360fe36
autodetect: use _plugin_feature_rank_compare API instead of duplicating the code.
2013-04-18 14:00:06 +02:00
Olivier Crête
24bb263d54
videomixer: Don't unref query, we don't own it
...
Fixes double-unref bug. Bug found by Youness Alaoui
2013-04-16 19:29:48 -04:00
Sebastian Dröge
b0b0557c48
gst: Add better support for static plugins
2013-04-15 15:54:11 +02:00
Andoni Morales Alastruey
2ea9a66dd5
goom2k1: fix duplicated symbol with goom
2013-04-15 08:43:05 +02:00
Wim Taymans
9d7519f66e
rtp: register tag image types
...
The rtpgstdepay needs the type to be available in order to deserialize the
event.
2013-04-12 16:18:42 +01:00
Wim Taymans
b1f4587d75
rtpgstdepay: handle event parse failures better
2013-04-12 16:18:42 +01:00
Anton Belka
b959d827be
wavenc: add TOC setter support
2013-04-12 14:35:47 +02:00
Stefan Sauer
f4577ff492
wavenc: small cleanups for toc handling
...
Don't add empty labl/note chunks. Always pass instance as the first param. Add more logging.
2013-04-12 14:35:47 +02:00
Sebastian Dröge
b17750ed9e
rtspsrc: Proxy the ntp-sync property of rtpbin
2013-04-12 12:58:50 +02:00
Sebastian Dröge
53dae1585e
rtspsrc: Give the manager always the name "manager"
...
This allows to use the GstChildProxy interface to adjust
properties on it.
2013-04-12 12:51:05 +02:00
Anton Belka
bda2703e88
wavenc: add 'note' chunk support
2013-04-11 20:47:18 +02:00
Wim Taymans
f8013487c9
rtspsrc: add support for NetClientClock
...
When the server suggests a GstNetTimeProvider in the SDP, set up a
GstNetClientClock that slaves to the remote clock and suggest this clock in
provide_clock.
2013-04-11 15:00:05 +01:00
Wim Taymans
f96aa414e1
udpsink: avoid alloc and free in render function
...
Avoid doing alloc and free in the render function for each buffer. Instead,
allocate the needed arrays in _init and use those.
2013-04-11 14:57:11 +01:00
Stefan Sauer
48b9919e31
waveparse: remove superfluous g_list_first() calls
...
The variables already point to the start of the list.
2013-04-10 14:25:24 +02:00
Andreas Fenkart
20d3ec8810
rtpsbcdepay: fix sbc frame length calculation for mono and stereo modes
...
https://bugzilla.gnome.org/show_bug.cgi?id=697463
2013-04-09 23:17:57 +01:00
Anton Belka
5ae92ce770
wavparse: add 'note' chunk support
...
Add 'note' chunk support in TOC as GST_TAG_COMMENT
https://bugzilla.gnome.org/show_bug.cgi?id=696549
2013-04-09 22:58:27 +02:00
David Schleef
a55ccff854
qtdemux: check value inside enda to set endianness
2013-04-09 13:30:17 -07:00
Wim Taymans
ece73b786a
icydemux: avoid copy when we can
2013-04-09 17:34:12 +02:00
Wim Taymans
91a3afc4dc
gstpay: use bufferlist to avoid memcpy
2013-04-09 16:53:31 +02:00
Wim Taymans
3d7d757521
udpsink: improve debug
2013-04-09 16:53:31 +02:00
Alexander Schrab
79d5a7d03c
wavparse: error out if we receive eos before any valid data
...
https://bugzilla.gnome.org/show_bug.cgi?id=696684
2013-04-09 00:27:31 +01:00
Matej Knopp
67c2219687
deinterlace: force deinterlacing in "interlaced" mode
...
https://bugzilla.gnome.org/show_bug.cgi?id=697467
2013-04-07 20:48:21 +01:00
Nicola Murino
c41c16424d
rtpsbcdepay: fix printf format compiler warnings
...
https://bugzilla.gnome.org/show_bug.cgi?id=697343
2013-04-05 13:50:19 +01:00
Stefan Sauer
b79f667ef4
level: resync on discont
...
Drop pending data on discont and start a new cycle with a new base timestamp.
Cleanup some variables.
2013-04-04 22:49:49 +02:00
Olivier Crête
f8831c0cd2
rtpsbcdepay: Rank as secondary
...
This way, it will be selected by decodebin
Bug reported by andreas.fenkart@streamunlimited.com
https://bugzilla.gnome.org/show_bug.cgi?id=697227
2013-04-03 18:25:36 -04:00
Stefan Sauer
2e56032031
level: subdivide buffers for sample accurate interval handling
...
Previously we would skip level message when processing buffers > the requested
interval. Also the message frequency would contain quite some jitter due to only
considering them at the end of buffers.
Cleanup the tests while we're at it.
2013-04-03 21:40:17 +02:00
Stefan Sauer
b062171dda
spectrum: remove old since comment
2013-04-03 20:30:08 +02:00
Sebastian Dröge
d80ff8e7f3
rtspsrc: Proxy the multicast-iface property of udpsrc
2013-04-03 17:53:13 +02:00
Olivier Crête
6f3734c305
rtpssrcdemux: Only forward stick events while holding the sinkpad stream lock
...
Otherwise we get a race where if the RTCP packet comes in first and while
it is added the pads, the segment event arrives on the RTP stream, the event
may be lost completely and never forwarded.
2013-04-02 23:42:42 -04:00
Olivier Crête
76679f9ae9
rtpssrcdemux: No need to explicitely forward the caps
...
They are forwarded with the other events
2013-04-02 23:42:41 -04:00
Olivier Crête
4ad8693f3c
rtpssrcdemux: Remove unused GstSegment
2013-04-02 23:42:41 -04:00
Olivier Crête
7293b0eff7
rtpssrcdemux: Simplify event forwarding
...
Use the gst_pad_forward() mechanic, this way we won't miss pads that are
added while we are pushing
2013-04-02 23:42:41 -04:00
Olivier Crête
f4c3aef13a
rtpssrcdemux: Don't cross the internal links
...
We had the wrong condition to check for the internal links, so RTP and RTCP
pads got crossed!
2013-04-02 23:42:41 -04:00
Tim-Philipp Müller
078ff16abe
matroskademux: fix some debug messages
2013-04-03 00:49:37 +01:00
Arnaud Vrac
00b46b4744
matroskademux: handle TrueHD audio codec id
...
https://bugzilla.gnome.org/show_bug.cgi?id=697113
2013-04-02 22:47:54 +01:00
Wim Taymans
ac2bcfa833
theorapay: add delta-unit to output frames
2013-03-31 19:14:04 +02:00
Matej Knopp
5686512b77
qtmux: use timestamp delta as duration if possible
...
https://bugzilla.gnome.org/show_bug.cgi?id=696437
2013-03-30 15:18:45 -07:00
Josep Torra
509631f60b
rtp: fixes debug message printf related compiler warnings in SBC depayloader
2013-03-30 09:44:41 +01:00
Arun Raghavan
87bdad4bfc
rtp: Add an rtpsbcdepay element
...
Pretty straightforward - takes SBC encapsulated in RTP, depayloads, and
pushes out SBC buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=690582
2013-03-28 17:22:33 +00:00
Tim-Philipp Müller
477cc51fe7
rtp: fix SBC payloader
...
Init RTP buffer on stack correctly, so mapping it works
without criticals and the payloader actually works.
2013-03-27 22:18:34 +00:00
David Schleef
53f8b05b08
Use %03u for format in gst_pad_create_stream_id_printf()
2013-03-25 18:57:08 -07:00
Sebastian Dröge
56062768af
capssetter: Prevent unneeded caps copying and allocation
2013-03-25 10:12:03 +01:00
Dirk Van Haerenborgh
766c5b22ed
capssetter: Pass any or filter caps upstream
...
capsetter accepts anything and just forwards different caps,
as such it should return ANY caps on the sinkpad.
https://bugzilla.gnome.org/show_bug.cgi?id=693005
2013-03-25 10:11:32 +01:00
Tim-Philipp Müller
35769f7c5d
wavparse: expose CUE sheet items as tracks not chapter entries in TOC
...
https://bugzilla.gnome.org/show_bug.cgi?id=677306
2013-03-24 17:55:55 +00:00
Tim-Philipp Müller
163a7afa1a
wavenc: add some example pipelines
2013-03-23 12:59:26 +00:00
Anton Belka
e808173483
wavenc: add TOC support
...
https://bugzilla.gnome.org/show_bug.cgi?id=680998
2013-03-23 12:55:08 +00:00
Matej Knopp
f29e62c131
qtdemux: make empty subtitle buffer recognition more robust
...
https://bugzilla.gnome.org/show_bug.cgi?id=696244
2013-03-23 11:24:23 +00:00
David Schleef
c0443a17c4
qtmux: Fix test regression with one buffer streams
2013-03-22 15:14:15 -07:00
David Schleef
5bd2864101
qtdemux: split large raw audio samples
...
In order to deal with a file that has samples that are 24 seconds
long. Seeking still doesn't work with such files.
2013-03-22 14:14:05 -07:00
David Schleef
364433c105
qtmux: Remove documentation for dts-method
2013-03-22 14:14:04 -07:00
David Schleef
6571e388be
qtmux: deprecate dts-method property
2013-03-22 14:14:04 -07:00
David Schleef
ee56a7cb99
qtmux: Fix problems causing bad durations in file
...
- Fix up out-of-order incoming DTS values.
- Fix duration of initial sample.
2013-03-22 14:14:04 -07:00
David Schleef
816e186029
qtmux: fix all timestamps once first_ts is determined
2013-03-22 14:14:04 -07:00
David Schleef
258c40c6dd
qtmux: Use PTS/DTS from incoming buffers
...
Remove old DTS guessing code.
2013-03-22 14:14:04 -07:00
Nicola Murino
709f05234f
qtmux: expose mulaw caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=696052
2013-03-22 20:08:06 +00:00
Rodolfo Schulz de Lima
874808fd2c
qtdemux: fix sample leak when processing private qt tags
...
https://bugzilla.gnome.org/show_bug.cgi?id=696355
2013-03-22 08:47:17 +00:00
Matej Knopp
d8ac666137
qtmux: set stream language code from tag
...
https://bugzilla.gnome.org/show_bug.cgi?id=696358
2013-03-22 08:40:26 +00:00
Matej Knopp
49d9050e9a
qtdemux: send GAP events for subtitle streams
...
https://bugzilla.gnome.org/show_bug.cgi?id=696244
2013-03-21 10:03:37 +00:00
Matej Knopp
516a0b8acb
qtdemux: ignore empty subtitle buffers
...
https://bugzilla.gnome.org/show_bug.cgi?id=696244
2013-03-21 10:03:34 +00:00
Matej Knopp
f494635126
qtdemux: recognize SBTL subtype for subtitles
...
https://bugzilla.gnome.org/show_bug.cgi?id=696244
2013-03-21 10:03:14 +00:00
Anton Belka
0f97b6f978
flacparse: add support for the toc-select event
...
Select tracks from the CUE sheet by sending a toc-select
event based on the uid in the TOC.
https://bugzilla.gnome.org/show_bug.cgi?id=540891
2013-03-21 00:38:48 +00:00
Michael Smith
b85c5f236b
mp4mux: in faststart mode, don't output up to 4 kB of garbage at the end.
2013-03-19 18:09:31 -07:00
Tim-Philipp Müller
5240b7453c
sbcparse: pack multiple frames into one output buffer
...
Don't output a single buffer for every tiny SBC frame
2013-03-20 00:35:17 +00:00
Kishore Arepalli
288e05c99d
deinterlace: fix infinite loop on EOS with non-default methods or fields
...
Fixes problem of infinite loop in gst_deinterlace_reset_history.
Last field in the history was never deinterlaced because idx becomes negative.
Happens e.g. with method=scalerbob fields=bottom or
method=greedyl fields=top
https://bugzilla.gnome.org/show_bug.cgi?id=695644
https://bugzilla.gnome.org/show_bug.cgi?id=693173
2013-03-17 14:47:26 +00:00
Tim-Philipp Müller
dfde4179e8
avimux: change raw video caps order so that GRAY8 is last
...
People like colours.
https://bugzilla.gnome.org/show_bug.cgi?id=695543
2013-03-12 00:16:18 +00:00
Ognyan Tonchev
3f8ad30cee
rtph264pay: Don't use upstream caps with peer_query_caps ()
...
Calling gst_pad_peer_query_caps () on the src pad with the caps
upstream can produce as a filter from gst_rtp_h264_pay_getcaps ()
is wrong and makes caps negotiation fail if upstream caps are not
NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=695629
2013-03-11 16:55:13 -04:00
Dirk Van Haerenborgh
065bdf5925
avimux: support raw BGR
...
https://bugzilla.gnome.org/show_bug.cgi?id=695543
2013-03-11 14:51:00 +01:00
Dirk Van Haerenborgh
d7743cf7c6
avidemux: support raw video with negative height
...
https://bugzilla.gnome.org/show_bug.cgi?id=695541
2013-03-11 14:23:46 +01:00
Tim-Philipp Müller
694dbcc5a0
dtmf: move dtmf plugin from -bad to -good
...
https://bugzilla.gnome.org/show_bug.cgi?id=687416
2013-03-09 01:18:30 +00:00