This can be used by sinks to take compressed formats, correctly payload
these in IEC 61937 frames and feed these to sinks that support
passthrough output over IEC 60958 (S/PDIF) or, in the case of MP3, over
Bluetooth.
Initial implementation includes AC3, E-AC3, MPEG-1, MPEG-2 (non-AAC),
and DTS (type-I/II/II) payloading. More formats can be added as needed.
API: gst_audio_iec61937_frame_size()
API: gst_audio_iec61937_payload()
https://bugzilla.gnome.org/show_bug.cgi?id=642730
This allows subclasses to provide a "payload" function to prepare
buffers for consumption. The immediate use for this is for sinks that
can handle compressed formats - parsers are directly connected to the
sink, and for formats such as AC3, DTS, and MPEG, IEC 61937 patyloading
might be used.
API: GstBaseAudioSinkClass:payload()
https://bugzilla.gnome.org/show_bug.cgi?id=642730
Adds support for pushing E-AC3 buffers and doing bytes-to-ms conversion
correctly. The assumption (as with other formats) is that something like
IEC 61937 payloading will be used. Correspondingly the ringbuffer spec
is populated so that the data rate is 4x normal AC3.
https://bugzilla.gnome.org/show_bug.cgi?id=642730
These are meant to be used for buffers containing AAC data. Nothing uses
this yet, but for now it serves to distinguish from GST_BUFTYPE_MPEG
which represents non-AAC MPEG audio.
API: GST_BUFTYPE_MPEG2_AAC
API: GST_BUFTYPE_MPEG4_AAC
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the
needed Android.mk files.
Androgenizer can be found here:
http://git.collabora.co.uk/?p=user/derek/androgenizer.git
A race was observed between query() and setcaps() where the latter would
change the ringbuffer spec while the former was performing operations
based this data.
Observed a case where the src went to null-state during the query,
hence the spec pointer was no longer valid, and
gst_util_unit64_scale_int crashed (assertion `denom > 0´failed)
Add locking to make sure the ringbuffer can't disappear.
Given a large enough drift-tolerance, one could end up in a situation
where one would keep aligning the written buffers behind the current
read-segment position. The result for the reader would be complete
silence, possible preceded by very choppy audio.
By checking the available headroom, one can determine if there is
room to do alignment, or if one should resort to a resync instead to get
the pointers back on track.
Also refactor the alignment-logic out of the render function for cleaner
code.
Commit ba2e500bd9 ensured to provide
a running clock when EOS had finished rendering. However,
other measures are needed (and were in place before) to ensure a
running clock when EOS still needs rendering (i.e. waiting).
So, specifically, re-introduce eos_rendering removed in aforementioned commit,
this time as a public variable so subclasses can be aware of the situation.
Fixes (part of) #645961.
API: GstBaseAudioSink:eos_rendering
Fixes introspection failures caused by type assertions/warnings.
Since we now moved from _get_type() functions to external GType
variables in a couple of places, we actually have to call gst_init()
to make sure these are set when we use GST_TYPE_FOO.
Make sure to use the PKG_CONFIG_PATH set at configure time instead of
just relying on an env-var set one. This makes sure both g-ir-compiler
and g-ir-scanner use the same PKG_CONFIG_PATH for determining include
paths etc.
Observed a case where the sink went to null-state during the query,
hence the ringbuffer-pointer was NULL, causing a crash.
Moving the ringbuffer-check code until after the query, and hold the
lock during the check and while using the spec-values. It should not matter
to the query wether the ringbuffer is present or not, and it actually
gets a time bit more time to get the ringbuffer set up in this case!
Fixes#635231
So run-time bindings can introspect the names correctly (we abuse this
field as description field only in elements, not for public API
(where the description belongs into the gtk-doc chunk).
https://bugzilla.gnome.org/show_bug.cgi?id=629746
Don't take an extra ref on the sink and source because that creates a reference
cycle. Instead, use the invalidate method of the clock when the sink and source
are freed. This way, we don't call into the time function anymore after the
objects are disposed.
When calling gobject-introspection scanner, make sure our own
freshly-built libs within the source tree (well, build dir) come
first in the PKG_CONFIG_PATH. May or may not help to make sure
that it doesn't pick up older external plugins-base libs (or
.gir files) from outside the source tree / build directory as
dependencies of the introspected lib instead of using the
stuff we just built in a sibling directory.
https://bugzilla.gnome.org/show_bug.cgi?id=623698
Elements usually use their own instance as instance data but the
clock can have a longer lifetime than their elements and the clock
doesn't own a reference of the element.
Fixes bug #623807.
Check for the state of the ringbuffer before doing the checks of the other
buffer properties, when we're not started, we don't care about those values.
This reverts commit cea2644ed8.
Many audio sink assume that they can create a clock in
the instance init function and it will be there forever
and not be cleared by the state change functions.
Point g-ir-scanner to the .la file of our library, which hopefully
makes it find the right dependencies in all cases (ie. our locally
built libgstreamer and not the system-installed one). This is also
how it's done in Gtk+ and how it's documented in the wiki, see
http://live.gnome.org/GObjectIntrospection/AutotoolsIntegrationFixes#603710.
Use new girdir and typlibdir from core .pc files, so we can figure
out the right includes to pass to the gobject-introspection tools,
whether core is installed in the same prefix as gobject-introspection
or in a different prefix or uninstalled. This also keeps us from adding
bogus paths to the includes that only work if core is uninstalled.
Also add some missing includes/pkgs where needed.
Increase default drift tolerance to 40ms to avoid glitches with decoders
or formats where there's a lot of timestamp jitter for some reason or
another (in this case: asf/wma), at least until we implement timestamp
smoothing.
Our calibration against the pipeline clock is done with the adjusted
ringbuffer time, so take the adjustement into account. Fixes some audio dropouts
when reusing audio sinks after switching clocks and slaving methods in a
pipeline.
When we are calibrating the internal clock against the external clock take into
account the time offset applied to our internal clock because we will subtract
that in the render_function again.
When we start and we need to produce the first sample, go to the next sample
that will be written into the ringbuffer instead of trying to go to sample 0.
We relied on rather small ringbuffer sizes to correctly go to the current
sample, which breaks whith large buffers.
Fixes#600945
Add drift-tolerance property (defaulting to 20ms) to handle resync after clock
drift or timestamp drift instead of relying on the latency-time value for clock
drift and 500ms for timestamp drift.
Remove warning about discont timestamp and simply resync. The warning is in some
cases not correct and is triggered more frequently now that we lower the
tolerance value.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
I also renamed glib_enum_prefix to glib_gen_prefix as we also use that for the
marshallers. Also rename the rtsp-marshal.list to work with the unified prefix.
Check for pulsesink < 0.10.17 because it includes code that is now included in
baseaudiosink. Disable that code in baseaudiosink to be compatible with the
older version.
Take the time of the clock so that the last_time field is set. This is important
for sinks that restart their internal ringbuffer after a caps change and need to
know the last know position.
When going to NULL, we reset the ringbuffer so that it starts beck from 0. We
also make sure that the clock is updated with the elapsed time so that it
alsways increments even when the ringbuffer goes back to 0. When this happened
we need to adjust the sample position for the reset ringbuffer.
Fixes#594136
The old one did the mistake of not actually advancing the ringbuffer, it just
adjusted the segbase, introducing the whole lenght of the ringbuffer as an
extra delay in the pipeline.
Also make sure that the resync can never go back in time, producing the same
timestamps that has already been produced, as this can cause severe problems
for sinks and other synching mechanisms.
Fixes#594256
Add section docs for multichannel, so that it has a short desc in the toc too.
Move the section docs in adio up, so that the follow the copyright like
elsewhere.
Unparent and free the ringbuffer when going to NULL, like we do with the
audiosrc element. We can do this now because we correctly manage the time
jumping back to 0.
Hack around thread-safety issues in GObject and our racy _get_type()
functions (we could easily fix the _get_type() functions, but we still
need to hack around the GObject class races until we require a newer
GLib version, I think).
Use the unadjusted internal clock times to calculate the internal/external
offset when calibrating the clock.
When going to NULL, unparent and free the ringbuffer, like we do in the source
element.
See #578506
Add two methods for getting the unadjusted time of the clock and one for
adjusting an internal time. We will need these methods for correctly handling
the time after a gst_audio_clock_reset().
Add a debug category and some debug lines to the audio clock.
API: gst_audio_clock_get_time()
API: gst_audio_clock_adjust()
API: GST_AUDIO_CLOCK_CAST()
After we pause the stream and interrupt the writeout to the ringbuffer, also adjust
the amount of output samples we consumed. We can't do this reliably with the
current API when we are doing trick modes but we can do the right thing for
normal playback.
Original commit message from CVS:
Patch by: José Alburquerque <jaalburqu svn gnome org>
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_new):
* gst-libs/gst/audio/gstaudioclock.h:
Make gst_audio_clock_new use const gchar* to ease the wrapping of
C++ bindings. Fixes#566723.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_change_state):
Avoid holding the OBJECT_LOCK when calling ringbuffer functions that
take the ringbuffer lock because rinbuffer lock > OBJECT_LOCK. We can do
this because the async_play method is deprecated and usually not called
anymore.
Original commit message from CVS:
* gst-libs/gst/audio/Makefile.am:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/multichannel.h:
* gst-libs/gst/audio/testchannels.c:
* win32/MANIFEST:
* win32/common/audio-enumtypes.c:
(gst_audio_channel_position_get_type),
(gst_ring_buffer_state_get_type),
(gst_ring_buffer_seg_state_get_type),
(gst_buffer_format_type_get_type), (gst_buffer_format_get_type):
* win32/common/audio-enumtypes.h:
* win32/common/multichannel-enumtypes.c:
* win32/common/multichannel-enumtypes.h:
* win32/vs6/grammar.dsp:
* win32/vs6/libgstaudio.dsp:
* win32/vs7/libgstaudio.vcproj:
* win32/vs8/libgstaudio.vcproj:
Switch glib-mkenum for gst-libs/gst/audio from multichannel- to
audio- in order to wrap all enums declarations of that library.
This modification should not matter since that header file is not a
public header (it will be included by public headers).
Modify win32 crap^Wfiles accordingly.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.h:
* gst-libs/gst/audio/gstbaseaudiosink.h:
Complete Sebastien's commit from the 13th by exporting the
_slave_method_get_type() methods.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps):
Pause the write thread before deactivating and releasing the ringbuffer
to avoid a deadlock when we do gapless playback with different sample
rates in playbin2. Fixes#564929.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
Make GstAudioSrcSlaveMethod get_type() function non-static
as it's public now.
* win32/common/libgstaudio.def:
* win32/common/libgstnetbuffer.def:
Add some missing functions to the list of exported symbols.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_slave_method_get_type),
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosink.h:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_slave_method_get_type),
(gst_base_audio_src_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
API: Add GST_TYPE_BASE_AUDIO_(SRC|SINK)_SLAVE_METHOD to the
public API. This is needed for the C++ bindings to be able
to use this base classes. Fixes bug #564200, #564206.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_offset), (gst_base_audio_src_create):
Avoid nasty int overflows after about 12 hours and 25 minutes when these
code paths are triggered.
A free beer to Håvard Graff for finding this!
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_event),
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
Really fix audiosink drain handling by keeping track of the running_time
of the last sample.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
Time is already in running_time. Remove base_time handling. Fixes
audiosinks not draining and thus chopping some audio in the end.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
Add one log message to check for audio_drained. Sync one log message
with the condition. Send EOS after draining audio in pull mode.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_callback):
Use gst_base_sink_do_preroll() to wait for PLAYING and before waiting
for the latency to expire, fixes#559567.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_class_init), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_activate), (gst_audioringbuffer_release),
(gst_audioringbuffer_stop):
Implement a separate activate functions to start monitoring the segments
or, in pull mode, pulling in data.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_init), (gst_base_audio_sink_dispose),
(gst_base_audio_sink_query_pad), (gst_base_audio_sink_query),
(gst_base_audio_sink_setcaps), (gst_base_audio_sink_callback),
(gst_base_audio_sink_activate_pull),
(gst_base_audio_sink_async_play),
(gst_base_audio_sink_change_state):
Implement pad and element convert query function.
Activate the ringbuffer.
Use the segment last_stop value as the offset to pull.
Use new basesink _do_preroll() method to preroll in the pulling thread.
Take appropriate locking in the pulling thread.
* gst-libs/gst/audio/gstringbuffer.h:
Update some docs.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_convert),
(gst_ring_buffer_activate), (gst_ring_buffer_is_active):
* gst-libs/gst/audio/gstringbuffer.h:
Add methods to more accuratly control the pulling thread of a
ringbuffer.
Add format conversion helper code to the ringbuffer.
API: GstRingBuffer:gst_ring_buffer_activate()
API: GstRingBuffer:gst_ring_buffer_is_active()
API: GstRingBuffer:gst_ring_buffer_convert()
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_acquire), (gst_audioringbuffer_release),
(gst_audioringbuffer_stop):
Signal thread startup earlier so that we can immediatly go into pull
mode when we have to and block on preroll.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read):
In pull mode we want the callback to prepull a buffer we can preroll on
even when we are not yet playing.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Fix debug statements (space between '%' and actual format).
Original commit message from CVS:
* gst-libs/gst/audio/audio.h: (GST_AUDIO_FIELD_SIGNED):
Remove trailing comma from enum list, which causes problems
with -pendantic (#550729).
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audioringbuffer_stop):
Disable a code path that is now called but causes a deadlock for some
reason and is unneeded.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_stop):
Since we now call stop, we trigger this code path that causes a deadlock
is apparently not needed.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_stop):
Also allow the case where the ringbuffer was paused when we try to stop
it so that the basesrc stop function is still called.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
When not slaved to another clock also subtract the base_time from our
internal clock time to get the running time.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstaudiosrc.h:
More docs and shuffling. What can we do with the hundreds of #defines.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
* gst-libs/gst/audio/gstaudiofilter.h:
* gst-libs/gst/audio/gstringbuffer.h:
* gst-libs/gst/interfaces/propertyprobe.h:
* gst-libs/gst/tag/gsttagdemux.h:
Reducing number of dundocumented symbols.
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
Fix doc comment syntax.
* gst-libs/gst/interfaces/propertyprobe.c:
Add more doc-comments and a FIXME: for the signal.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query), (gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_render):
Report latency even if we are not live instead of hiding it.
Take ts-offset and render-delay of the basesink into account when
scheduling samples.
Rework the clipping code so that we can take the various offsets into
account and still do correct clipping.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
* gst-libs/gst/audio/multichannel.h:
API: Make gst_audio_check_channel_positions() public.
* tests/check/libs/audio.c: (GST_START_TEST):
Add some simple checks for gst_audio_check_channel_positions().
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
Add a gtk-doc chunk for the new properties to have a Since: indication.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_dispose),
(gst_base_audio_src_get_property), (gst_base_audio_src_setcaps),
(gst_base_audio_src_change_state):
Provide readable actual-buffer-time and actual-latency-time properties
that reflect the configured ringbuffer values. Fixes#524724.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Allow rear center together with rear left/right and other previously
conflicting channel positions. The reason why they weren't allowed
was the channel mixing implementation in audioconvert.
Also take this into account when fixing channel layouts.
Allow setting channel positions for 1/2 channels when using
gst_audio_set_structure_channel_position().
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_compatible), (gst_channel_mix_detect_pos),
(gst_channel_mix_fill_one_other), (gst_channel_mix_fill_others),
(gst_channel_mix_fill_special), (gst_channel_mix_fill_matrix):
Major rewrite of the channel mixing.
We now allow previously conflicting channel positions to appear
together (rear center and rear left/right for example).
Fixes bug #533817.
Rework the way channels are mixed together to take more possible
channel positions into account, properly mix from/to side channels
and don't assume that either center, left&right or nothing of a
specific position is available anymore.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Adjust unit tests with non-standard 1/2 channel layouts to the more
correct new behaviour.
Add a unit test for 5.1->Stereo downmixing.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_init),
(gst_audio_clock_reset), (gst_audio_clock_get_internal_time):
* gst-libs/gst/audio/gstaudioclock.h:
Add method to inform the clock that the time starts from 0 again. We use
this info to calculate a clock offset so that the time we report in
internal_time is monotonically increasing, as required by the clock base
class. Fixes#521761.
API: GstAudioClock::gst_audio_clock_reset()
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_change_state):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Reset reported time when we (re)create the ringbuffer.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
Allow non-standard 2 channel layouts.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some tests for converting and remapping non-standard 1 and 2
channel layouts.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_sync_latency):
We can only use our optimal calibration if we prerolled before the
latency expired.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c: (gst_gnome_vfs_src_init),
(gst_gnome_vfs_src_finalize),
(gst_gnome_vfs_src_received_headers_callback),
(gst_gnome_vfs_src_create), (gst_gnome_vfs_src_stop):
* ext/gnomevfs/gstgnomevfssrc.h:
Set the ICY caps on the srcpad from where they get picked up by the base
class now and set on the outgoing buffers.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
* sys/v4l/v4lsrc_calls.c: (gst_v4lsrc_buffer_new):
BaseSrc now sets the caps on outgoing buffers automatically.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play),
(gst_base_audio_sink_change_state):
Change the way in which the ringbuffer is started when dealing with a
slaved clock and latency. We now sync to the clock until we reach
upstream latency before starting the ringbuffer. This has the effect
that we can accurately align the master and slave clocks and let the
rate correction code take care of the initial drift or rounding errors
instead of leaving them uncorrected with the old approach.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render), (gst_base_audio_sink_async_play):
Revert previous patch that attempted to more accurately calculate the
initial offset between master and slave clock. The best thing we can do
in general is take the time of both clocks as the diff since we don't
know when the actual preroll happened.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_acquire):
Choose to allocate one less segment but require one additional segment
as latency.
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audioringbuffer_acquire):
No need to increment the number of segments in the source.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (clock_convert_external),
(gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_none_slaving), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play):
Remove adding latency when returning the internal time while subtracting
it again when we use the value a little later.
When calculating the end timestamp, we are making a rounding error
with the current algorithm. Ensure that we don't accumulate these
rounding errors when aligning samples by not resampling at all if we
don't need to. Fixes#419351.
Make the initial calibration of the clock slaving a little more
predictable and accurate. Also handle the case where we don't do
clock slaving.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query):
Report the latency with the new seglatency parameter.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_debug_spec_buff), (gst_ring_buffer_parse_caps),
(gst_ring_buffer_acquire):
* gst-libs/gst/audio/gstringbuffer.h:
Add new field to the ringbufferspec to specify the expected latency
between the underlying device read/write pointer, this is needed
when writing sinks that sit a little closer to the hardware.
Add some more docs for other fields.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.h:
Clarify some docs.
* gst-libs/gst/audio/gstbaseaudiosrc.c: (slave_method_get_type),
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_set_slave_method),
(gst_base_audio_src_get_slave_method),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Add property and methods for selecting the clock slave method in the
source, like in the sink.
We only implement "none" and "re-timestamp" for now.
API: gst_base_audio_src_set_slave_method()
API: gst_base_audio_src_get_slave_method()
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_may_start):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
* gst/playback/gstplayback.c: (plugin_init):
* gst/volume/gstvolume.c: (plugin_init):
Work around missing bits of thread-safety on older GLibs some
more to avoid assertions when starting up multiple playbin
objects concurrently (see #512382).
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving), (gst_base_audio_sink_render):
Guard against over and underflows because of clock slaving.
When we are using our own clock, still compensate for any calibrations
that we might have done to our clock.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_release):
Small debug improvement.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Fix bug in determining the sample start/stop position, we want to base
this decision on the fact that we are going forwards or backwards, not
slower or faster. This fixes some ugly resync warnings when playing at
very slow speeds.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h:
Rename recently added buffer types to make more sense.
* ext/alsa/gstalsasink.c: (alsasink_parse_spec),
(gst_alsasink_write):
Adapt for above API changes.
Fixes bug #520523.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Fix duration when no clock was provided. Fixes#520300.
Original commit message from CVS:
2008-02-29 Julien Moutte <julien@fluendo.com>
* ext/alsa/gstalsa.c: (gst_alsa_open_iec958_pcm),
(gst_alsa_probe_supported_formats): Probe for IEC958 pcm to
detect
if we can do SPDIF output.
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (set_hwparams), (alsasink_parse_spec),
(gst_alsasink_prepare), (gst_alsasink_close),
(gst_alsasink_write):
* ext/alsa/gstalsasink.h: Initial support for SPDIF.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h: Add non linear buffer
types
to support AC3, EC3 and IEC958 buffers.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(GST_AUDIO_CHANNEL_POSITIONS_FIELD_NAME),
(gst_audio_get_channel_positions), (gst_audio_set_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(add_list_to_struct), (gst_audio_set_caps_channel_positions_list),
(gst_audio_fixate_channel_positions):
Fix confusing terminology in docs and code: structure fields are
'fields' and not 'properties'.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions), (add_list_to_struct):
Give more useful warning messages if one of the channel
layout enums passed to us is invalid and if the "channels"
field in the caps has a GType we don't expect.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c:
(gst_audio_filter_class_init):
Initialize the GstRingerBuffer class to get it's debug category
initialized. gst_ring_buffer_parse_caps() uses the ringbuffer debug
category and otherwise we get some g_critical(). Fixes bug #512334.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
Ref audio clock class from a thread-safe context to make sure
we're not bit by GObjects lack of thread-safety here (#349410),
however unlikely that may be in practice.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audio_filter_get_type):
Don't set element details for the abstract GstAudioFilter class.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c:
(gst_audio_filter_class_init), (gst_audio_filter_get_unit_size):
Implement get_unit_size() vmethod of GstBaseTransform.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_open_device),
(gst_audioringbuffer_close_device), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release), (gst_audioringbuffer_start),
(gst_audioringbuffer_pause), (gst_audioringbuffer_stop),
(gst_audio_sink_create_ringbuffer):
Improve debug output.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_pause), (gst_ring_buffer_delay):
Prevent some functions from doing things and failing when the
ringbuffer is not yet acquired.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Add debug info.
When going from PLAYING to PAUSED, pause the ringbuffer before calling
the parent state change function, just like the audiosink, because the
parent waits for the element to finish its processing before completing
the state change. This makes going to PAUSED a lot snappier.
When going from READY to PAUSED, don't allow the ringbuffer to start
yet.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain):
Our EOS time contains the base_time, _wait_eos() expects a running_time
so we have to subtract the base_time again before calling the function.
This fixes an EOS regression where the base_time was added twice and EOS
took longer and longer in certain situations.
Fixes#498767.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstbaseaudiosink.c: (slave_method_get_type),
(gst_base_audio_sink_set_provide_clock),
(gst_base_audio_sink_get_provide_clock),
(gst_base_audio_sink_set_slave_method),
(gst_base_audio_sink_get_slave_method),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_drain),
(gst_base_audio_sink_none_slaving),
(gst_base_audio_sink_handle_slaving):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Expose methods for some object properties so that subclasses can more
easily configure them.
Added slave method none, that completely disables slaving to the
internal clock.
API: gst_base_audio_sink_set_provide_clock()
API: gst_base_audio_sink_get_provide_clock()
API: gst_base_audio_sink_set_slave_method()
API: gst_base_audio_sink_get_slave_method()
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_set_provide_clock),
(gst_base_audio_src_get_provide_clock),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Expose methods for some object properties so that subclasses can more
easily configure them.
API: gst_base_audio_src_set_provide_clock()
API: gst_base_audio_src_get_provide_clock()
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_parse_caps):
Return NULL instead of an enum that happens to be 0, fixes warning
on MSVC (#492114).
* gst-libs/gst/audio/gstringbuffer.h:
No trailing commas in enum list (for gcc-2.9x).
* gst/videotestsrc/videotestsrc.c: (random_char):
Make information loss explicit instead of implicitly truncating to
eight bits via the return value. Fixes runtime error on MSVC when
using the debug CRT (#492114).
* win32/common/config.h.in:
Fix a bunch of '#undef FOO bar', which MSVC doesn't like (#492114).
* win32/common/libgstinterfaces.def:
* win32/common/libgstrtp.def:
Export a few more symbols (#492114).
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/audio.h:
Readd the deprecation guards, but preserve compilability.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
Don't guard deprecated enum with #ifndef DISABLE_DEPRECATED, or
compilation with DISABLE_DEPRECATED and without REMOVE_DEPRECATED
(ie. normal cvs builds) will fail.
Original commit message from CVS:
* docs/libs/Makefile.am:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/audio.h:
* gst-libs/gst/interfaces/mixer.c:
tell gtk-doc about the deprecation guard. Apply more doc fixes.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstaudiofilter.h:
* gst-libs/gst/interfaces/mixer.h:
* gst-libs/gst/rtp/gstbasertpdepayload.c:
* gst-libs/gst/rtp/gstbasertpdepayload.h:
* gst-libs/gst/sdp/gstsdpmessage.c:
Fix the docs according to what gtk-doc complained about.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_change_state):
Also explicitly release the ringbuffer when going to NULL because it
is required in the setcaps function, before the state change to PAUSED
completes.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain):
Use new basesink method to make our EOS drain interruptable.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Also handle the case where there is no clock set on the audio source,
like in the unit tests.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_async_play):
When slaved to the clock, don't try to align a sample with the previous
one when going to PLAYING again.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_set_property):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/rtp/gstrtcpbuffer.c: (gst_rtcp_ntp_to_unix),
(gst_rtcp_unix_to_ntp):
* gst-libs/gst/rtsp/gstrtspmessage.c: (gst_rtsp_message_get_type):
* gst/playback/gstqueue2.c:
* tests/examples/seek/seek.c: (set_scale):
Fix a bunch of compile warnings shown with Forte.
* gst/audiorate/gstaudiorate.c:
Always pull in config.h before including any system headers.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_init):
Disable pull mode scheduling, we're not ready for it yet and it subtly
breaks a lot of things.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_provide_clock),
(gst_base_audio_src_set_property),
(gst_base_audio_src_get_property), (gst_base_audio_src_create):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
Allow othe clocks than the internal clock to be used for the pipeline.
Add property to disable clock provide.
API: GstBaseAudioSrc::provide-clock
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
When skew slaving, try to hover around the middle of a segment so that
we at most drift by half a segment.
If we are aligning in the oposite direction of the clock skew, we don't
have to resync.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
Use gst_util_uint64_scale() instead of doing the math
with double for GST_FRAMES_TO_CLOCK_TIME() and
GST_CLOCK_TIME_TO_FRAMES(). For large timestamps this
prevents rounding errors. Fixes#467667.
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
When clipping a buffer with no timestamp, assume it is
within the segment without warnings.
Fixes: #460978
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/audio.c: (gst_audio_buffer_clip):
* gst-libs/gst/audio/audio.h:
* tests/check/libs/audio.c: (GST_START_TEST), (audio_suite):
API: Add buffer clipping function for raw audio buffers. Fixes#456656.
Also add deprecation guards for gst_audio_structure_set_int() to the
header.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_callback):
Quick hack to make audiosinks stop at EOS when operating in
pull-mode; needs to be fixed properly some day.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_init): Enable pull-mode operation.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
After an interrupt (PAUSED/flush) assume that the next sample should not
be aligned to the previous sample. Fixes#417992.
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (_do_init),
(gst_base_audio_src_create):
* po/POTFILES.in:
When posting a warning message because samples were dropped, post
something more intelligible than he default error message for clock
errors which is just confusing in this context (#432984).
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving):
Don't try to create invalid calibration parameters by making the
internal time go backwards, instead make external time go forward.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c: (slave_method_get_type),
(gst_base_audio_sink_class_init), (gst_base_audio_sink_init),
(gst_base_audio_sink_query), (gst_base_audio_sink_get_time),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_event),
(clock_convert_external), (gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_handle_slaving), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Store private stuff in GstBaseAudioSinkPrivate.
Add configurable clock slaving modes property.
API:: GstBaseAudioSink::slave-method property
Some more latency reporting tweaks.
Added skew based clock slaving correction and make it the default until
the resampling method is more robust.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:(gst_base_audio_sink_render):
Use gst_guint64_to_gdouble for conversion.
* win32/MANIFEST:
Add new files to the win32 MANIFEST.
* win32/common/libgstaudio.def:
* win32/common/libgstpbutils.def:
Add new exported functions.
* win32/vs6/gst_plugins_base.dsw:
* win32/vs6/libgstdecodebin.dsp:
* win32/vs6/libgstplaybin.dsp:
Change the link to libgstpbutils.lib.
* win32/vs6/libgstdecodebin2.dsp:
Add a new project for decodebin2.
* win32/vs6/libgstpbutils.dsp:
Add a new project for pbutils.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_async_play):
Fix regression that made GStreamer skip the first samples of audio.
Fixes#414684.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func):
* gst-libs/gst/audio/gstaudiosrc.c: (audioringbuffer_thread_func):
Improve debugging.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query), (gst_base_audio_sink_event),
(gst_base_audio_sink_render), (gst_base_audio_sink_async_play):
Improve latency and clock slaving calculations.
Improve slave clock calibration.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full):
When we are asked to render N sample to 0 bytes, return N.
Original commit message from CVS:
2007-02-22 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_init): Disable pull-mode activation until we
figure out how to make audio sinks go to PLAYING.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c:
(gst_audio_filter_class_init), (gst_audio_filter_change_state):
Clear our formats structure and free the caps contained in it when
shutting down.
Original commit message from CVS:
2007-02-05 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_callback): Update basesink->offset so that we
pull monotonically increasing offsets instead of, um, seeking back
to 0 each time. Fixes alsasrc ! alsasink!
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audio_filter_get_type),
(gst_audio_filter_class_init), (gst_audio_filter_init),
(gst_audio_filter_set_caps),
(gst_audio_filter_class_add_pad_templates):
* gst-libs/gst/audio/gstaudiofilter.h:
Port GstAudioFilter to 0.10. This change technically breaks
API and ABI (and thus also every library developer's heart),
but seems justifiable on the grounds that the base class was
completely unusable before (ie. would crash immediately when
actually used). Fixes#403963 (and eventually also #403572).
Also document all of this a bit.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_fixate): Implement, stolen from baseaudiosrc.
(gst_base_audio_sink_activate_pull): Remove the handwavey nego
stuff, as the base class handles this now. Actually tell the ring
buffer to start.
(gst_base_audio_sink_callback): Cast the ring buffer correctly.
How did this work before? Maybe I'm not as awesome a programmer as
I think.
* gst-libs/gst/audio/gstbaseaudiosrc.c
(gst_base_audio_src_fixate): Rework as a basesrc vmethod instead
of a pad function.
Original commit message from CVS:
* gst-libs/gst/audio/mixerutils.h:
Add G_BEGIN_DECLS and G_END_DECLS guards so these helpers can be
used when compiling with c++ compilers as well.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_class_init)
(gst_base_audio_sink_init):
(gst_base_audio_sink_activate_pull): Add an activate_pull function
to baseaudiosink, and tell basesink that we can work in pull mode.
This way the ring buffer thread drives the pipeline directly, if
pull mode is possible. There is some lingering nastiness regarding
capsnego, however.
(gst_base_audio_sink_callback): Implement the callback to pull
data. This interface is a bit light, though -- it should get a
GstFlowReturn return value at least.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_render):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Make the clock sync code more accurate wrt resampling and playback
at different rates.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full), (gst_ring_buffer_commit):
* gst-libs/gst/audio/gstringbuffer.h:
Use better algorithm to interpolate sample rates.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func):
* gst-libs/gst/audio/gstaudiosrc.c: (audioringbuffer_thread_func):
Use g_strerror instead of strerror so we get UTF-8.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_render):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Extract rate from the NEWSEGMENT event.
Use commit_full to also take rate adjustment into account when writing
samples to the ringbuffer.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
* gst-libs/gst/audio/gstringbuffer.h:
Added _commit_full() to also take rate into account.
Use simple interpolation algorithm to resample audio.
API: gst_ring_buffer_commit_full()
* tests/examples/seek/scrubby.c: (speed_cb), (do_seek):
* tests/examples/seek/seek.c: (segment_done):
Don't try to seek with 0.0 rate, just pause instead.
Remove bogus debug line.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps):
Don't crash when ringbuffer is not yet created.
Patch by: Ville Syrjala <ville dot syrjala at movial dot fi>
Fixes#361634.
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
* gst/playback/gststreamselector.c:
(gst_stream_selector_request_new_pad):
Activate pads befre adding them to running elements.
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* ext/gnomevfs/gstgnomevfssink.c:
* ext/gnomevfs/gstgnomevfssrc.c:
Fix URI interface implementation return type.
* ext/pango/gsttextoverlay.c: (gst_text_overlay_set_property):
Fix what looks like a copy/paste issue when assigning values.
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
(gst_audio_filter_template_get_type):
Cast to prevent Forte warnings.
* gst-libs/gst/cdda/gstcddabasesrc.c: (gst_cdda_base_src_create):
Fix URI interface implementation return type.
gst_pad_query_position requires a signed integer pointer as
3rd parameter, GstClockTime is unsigned.
* gst/audioconvert/audioconvert.c:
Fix integer overflow when treated as signed.
* gst/audioresample/resample.c: (resample_add_input_data):
Cast to prevent warnings on Forte.
* gst/ffmpegcolorspace/imgconvert.c: (build_rgb_palette):
Fix integer overflow when treated as signed.
* gst/ffmpegcolorspace/imgconvert_template.h:
Fix integer overflow when treated as signed. RGBA_OUT shifts bits.
* gst/playback/gstdecodebin.c: (queue_filled_cb),
(cleanup_decodebin):
Who initialises a guint to -1!
Cast function pointers to prevent warnings on Forte.
* gst/playback/gstplaybasebin.c: (queue_deadlock_check),
(queue_threshold_reached):
Cast function pointers correctly to prevent warnings on Forte.
* gst/playback/gststreaminfo.c: (gst_stream_info_dispose):
Cast function pointers correctly to prevent warnings on Forte.
* gst/subparse/gstssaparse.c: (gst_ssa_parse_setcaps):
Obvious change to unsigned, 0xEF > max signed char.
* gst/tcp/gstmultifdsink.c: (get_buffers_max), (count_burst_unit):
GstClockTime is unsigned, initialise correctly.
* gst/tcp/gsttcp.c: (gst_tcp_socket_write):
Cast so pointer arithemetic doesn't cause warnings on Forte.
* gst/videorate/gstvideorate.c:
Use correct return value.
* tests/examples/seek/scrubby.c:
GstClockTime is unsigned, initialise correctly.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
When we have a timestamp, we can still perform clipping.
When we have no clock, we must play the sample ASAP.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Add some more info in a WARNING.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Handle PAUSE in create function, use new -core addition to
wait for playing. Fixes pausing and resuming capture from an
audiosrc.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Constify some more.
Caller supports interrupted reads now.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_samples_done), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Early morning compilation fix.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c:
Add docs about icydemux usage in connection with gnomevfssrc
* ext/libvisual/visual.c:
* ext/ogg/gstoggaviparse.c:
* ext/ogg/gstoggdemux.c:
* ext/ogg/gstoggmux.c:
* ext/ogg/gstoggparse.c:
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
* gst-libs/gst/audio/gstaudiosink.c:
* gst-libs/gst/audio/gstaudiosrc.c:
* gst/audiorate/gstaudiorate.c:
More G_OBJECT macro fixing.
* gst/audiotestsrc/gstaudiotestsrc.h:
Fix wrong info in header due to copy & paste
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (gst_base_audio_sink_callback):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_fixate),
(gst_base_audio_src_get_times), (gst_base_audio_src_get_offset),
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Do the delay calculation in the source/sink base classes as this is
specific for the capture/playback mode.
Try to fixate a bit better, like round depth up to a multiple of 8
bigger than width.
Handle underruns correctly by marking DISCONT on buffers and adjusting
timestamps to handle the gap.
Set offset/offset_end correctly on buffers.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_pause),
(gst_ring_buffer_samples_done), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Remove resync and underrun recovery from the ringbuffer.
Fix ringbuffer read code on under/overrun.
Original commit message from CVS:
* configure.ac:
We require 0.10.10.1 now because of _wait_preroll().
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Use gst_base_sink_wait_preroll().
Original commit message from CVS:
* ext/alsa/gstalsa.c: (caps_add_channel_configuration),
(gst_alsa_detect_channels):
* ext/alsa/gstalsasink.c:
Add support for cards that (only) do more than 8 channels,
like the Delta 44 (#345188).
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
* gst-libs/gst/audio/multichannel.h:
API: add GST_AUDIO_CHANNEL_POSITION_NONE, which stands for an
unspecified channel position and cannot be combined with any
of the other audio channel positions; adjust position layout
checks accordingly (#345188).
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Don't try to align a sample to an unknown value.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_provide_clock), (gst_base_audio_sink_render):
When the audio clock is slaved to another clock, never try to align
samples but trust the rate interpolation algorithm.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_prepare):
Don't try to calculate silence samples, base class does this much
better now.
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps),
(gst_ring_buffer_acquire):
Calculate silence samples correctly.
* gst-libs/gst/audio/gstringbuffer.h:
Add _CAST macro.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_finalize), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release), (gst_audioringbuffer_stop):
Fix leak.
Avoid type casting when we can.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_dispose):
Fix mem leak.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_fixate_channel_positions):
Const-ify two arrays.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_set_clock),
(gst_base_audio_src_check_get_range), (gst_base_audio_src_create):
Don't try to post an error message when setting the clock fails
as this can happen when adding an element to a bin which will then
deadlock. Fixes#347296.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_prepare):
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps):
Revert last two changes that broke the freeze.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps):
Calculate correct silence samples so we don't fill our ringbuffer
with noise.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init),
(gst_base_audio_sink_provide_clock):
Use gobject_class instead of G_OBJECT_CLASS (klass)
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_init),
(gst_base_audio_src_set_clock), (gst_base_audio_src_provide_clock),
(gst_base_audio_src_get_time),
(gst_base_audio_src_check_get_range), (gst_base_audio_src_create),
(gst_base_audio_src_create_ringbuffer):
Fix latency and buffer-time constants and properties ala basesink.
Implement pull based scheduling. Fixes#346527.
Set default blocksize in GstBaseSrc to 0, we default to pushing out
one segment.
Refuse slaving to another clock instead of silently not working.
Only provide a clock when we are actually able to do so.
Various small cleanups and compiler hints.
Original commit message from CVS:
* docs/libs/Makefile.am:
* docs/libs/gst-plugins-base-libs-docs.sgml:
* docs/libs/gst-plugins-base-libs-sections.txt:
* docs/libs/gst-plugins-base-libs.types:
add remaining symbols into correct setions
* gst-libs/gst/audio/gstringbuffer.c:
fix incomplete docs
* gst-libs/gst/audio/gstringbuffer.h:
comment out not yet implemented function
* gst-libs/gst/floatcast/floatcast.h:
* gst-libs/gst/netbuffer/gstnetbuffer.c:
add short descriptions
* gst-libs/gst/interfaces/propertyprobe.c:
fix return value docs
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_chunk):
simplify debug logging
* gst-libs/gst/riff/riff-read.h:
sync function prototype and docs
* gst-libs/gst/rtp/gstbasertpaudiopayload.h:
remove left over symbol
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_setcaps):
* gst-libs/gst/audio/gstbaseaudiosink.h:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps),
(gst_ring_buffer_samples_done):
* gst-libs/gst/audio/gstringbuffer.h:
Document better the fact that latency_time and buffer_time are values
stored in microseconds, and not the usual GStreamer nanoseconds.
Change the variables (compatibly) that store them from GstClockTime
to guint64 to make it more clear that they're not storing clock times.
Also, remove the bogus property description that says the user can
specify -1 to get the default value, since that's never been the case.
When computing the default segment size for the ring buffer, make it
an integer number of samples.
When the sub-class indicates a delay greater than the number of
samples we've written return 0 from the audio sink get_time method.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
It's okay to have caps with channels=1 and a channel position
different from GST_AUDIO_CHANNEL_POSITION_FRONT_MONO
(deinterleavers might want to keep the position in the caps,
so that they can be re-interleaved again properly later).
Leave check for unexpected 2-channel layouts intact for now.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_event),
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
patch to make timestamp checking more tollerant to rounding
errors given that real discontinuities are to be marked on
buffers. Fixes some asf files and #338778.
Also avoid some crashers when we receive an event in the
NULL state.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (gst_base_audio_src_init),
(gst_base_audio_src_get_time), (gst_base_audio_src_create):
GstBaseAudioSrc must be live or it does not work.
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audio_src_init):
Don't set live to TRUE as this is the default in the parentclass.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event):
Starting the ringbuffer when we did not acquire it can cause
a deadlock, is pointless and causes nasty things for
subclasses.
Fixes gst-launch audiotestsrc num-buffers=0 ! alsasink.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_create),
(gst_base_audio_src_change_state):
Fix audio sources, forgot to make the ringbuffer
startable...
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_create),
(gst_base_audio_src_change_state):
unparent instead of unref the ringbuffer.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_async_play),
(gst_base_audio_sink_do_play), (gst_base_audio_sink_change_state):
Implement new async_play vmethod to start slaving and allow
playback start in case of async PLAY state changes.
* gst-libs/gst/video/gstvideosink.c: (gst_video_sink_init):
Enable QoS with new method in base class.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_dispose):
Since we _parent the ringbuffer, we also need to
_unparent instead of a plain _unref.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_change_state):
* gst-libs/gst/audio/gstringbuffer.c: (wait_segment),
(gst_ring_buffer_may_start):
* gst-libs/gst/audio/gstringbuffer.h:
Only start playback if we are playing.
should fix#330748.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-docs.sgml:
* docs/libs/gst-plugins-base-libs-sections.txt:
* docs/libs/gst-plugins-base-libs.types:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
Added some more docs to libs and plugins.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read), (gst_ring_buffer_clear):
* gst-libs/gst/audio/gstringbuffer.h:
Document ringbuffer some more.
* gst/videorate/gstvideorate.c: (gst_video_rate_class_init),
(gst_video_rate_setcaps), (gst_video_rate_reset),
(gst_video_rate_init), (gst_video_rate_flush_prev),
(gst_video_rate_swap_prev), (gst_video_rate_event),
(gst_video_rate_chain), (gst_video_rate_change_state):
* gst/videorate/gstvideorate.h:
Fix videorate to use segments.
Make it work with 0/1 framerates (closes#331903)
Handle EOS correctly.
Added docs.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_provide_clock):
Don't try to provide a clock in the NULL state.
Original commit message from CVS:
* gst-libs/gst/audio/mixerutils.c:
(element_factory_rank_compare_func):
Make order in which elements are tried more determinable.
Original commit message from CVS:
* gst-libs/gst/audio/TODO:
Update TODO
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_offset):
When trying to play samples ASAP and we don't have a
previous sample, try to play at position 0 instead of
an invalid position.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
Minor docs fix.
* gst-libs/gst/riff/Makefile.am:
* gst-libs/gst/riff/riff-ids.h:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_wavext_add_channel_layout), (gst_riff_create_audio_caps):
Add support for WAVEFORMATEX, eg. PCM audio with more than two
channels and a channel layout map.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_get_channel_positions):
When we have more than 2 channels, but no channel layout is
specified in the caps, return some default channel layout
to the caller and warn about about a possibly buggy element
(could be buggy filtercaps as well of course) (#317038).
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_pause_unlocked), (gst_ring_buffer_delay),
(gst_ring_buffer_samples_done), (wait_segment),
(gst_ring_buffer_commit), (gst_ring_buffer_clear):
Add some compiler G_(UN_)LIKELY help.
SIGNAL the ringbuffer waiters when going to PAUSED as well to
make sure they can exit their functions. Should fix#330748
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (gst_base_audio_sink_preroll),
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
Always sync on first sample we receive when starting.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (gst_base_audio_sink_setcaps),
(gst_base_audio_sink_drain), (gst_base_audio_sink_preroll),
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
Use scale functions when possible.
Fix error messages.
Free clockid when after waiting for EOS.
Use G_(UN_)LIKLY when it makes sense.
Fix sample clipping bug found by Arwed v. Merkatz fixes#330789.
Original commit message from CVS:
2006-02-09 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstringbuffer.c
(gst_ring_buffer_samples_done): Cast to guint64, fixes an integer
overflow after 13.5 hours of recording. Kapow!
* ext/alsa/gstalsasrc.c (gst_alsasrc_delay): Clamp the delay to
the buffer size -- we don't care about underrun/overrun reporting
right now, just need to return a useful value.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_provide_clock),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_render):
Don't try to provide a clock when we are not negotiated since
we might not be able to make it run.
Original commit message from CVS:
* gst-libs/gst/audio/TODO:
Updated.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_event):
On EOS, wait till the last sample is played before posting EOS.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_class_init), (gst_audioringbuffer_release),
(gst_audioringbuffer_pause):
Implement pause that does not wait for completion.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
Don't drop buffers when going to PAUSED but perform preroll on
remaining samples now that core base class supports this.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_release),
(gst_ring_buffer_pause_unlocked), (gst_ring_buffer_stop),
(gst_ring_buffer_commit):
Pause should not signal waiters.
Implement return value of _commit correctly.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h: (GST_CLOCK_TIME_TO_FRAMES)
* gst-libs/gst/audio/gstbaseaudiosink.c: (gst_base_audio_sink_render)
use of gst_guint64_to_gdouble to be compliant with vs6
* gst/playback/gstdecodebin.c: (try_to_link_1)
* gst/videorate/videorate.c: (gst_video_rate_blank_data)
use of G_GINT64_CONSTANT for int64 constants
* win32/common/libgstinterfaces.def:
export some symbols (gst_mixer_get_type,gst_mixer_track_get_type)
* win32/vs6:
update and add new project files
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
Undo previous commit, it breaks resume after pause.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps), (gst_base_audio_sink_event),
(gst_base_audio_sink_preroll), (gst_base_audio_sink_render):
Improve debugging.
Post error when caps cannot be parsed.
Resync on discontinuity in the stream.
Clip samples to segment boundaries.
return WRONG_STATE sooner when we are flushing.
* gst-libs/gst/audio/gstbaseaudiosrc.c: (gst_base_audio_src_init),
(gst_base_audio_src_get_time), (gst_base_audio_src_create):
Make audiosrc operate in TIME.
Set TIMESTAMP and DURATION on buffers.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Fix playback of non-synchronised streams by assuming a rate
of 1.0 instead of a random one.
Makes this work again:
gst-launch filesrc location=raw_audio.file ! 'audio/x-raw-int,
endianness=(int)4321, signed=(boolean)true, width=(int)16,
depth=(int)16, rate=(int)44100, channels=(int)2' ! audioconvert !
audioresample ! alsasink
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps):
Set depth and width for alaw/mulaw (fixes#326601).
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_init),
(gst_ring_buffer_set_flushing), (gst_ring_buffer_start),
(gst_ring_buffer_pause), (wait_segment):
* gst-libs/gst/audio/gstringbuffer.h:
Name (private) union, makes Forte compiler happy (this time
for real) (#324900).
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_init),
(gst_ring_buffer_set_flushing), (gst_ring_buffer_start),
(gst_ring_buffer_pause), (wait_segment):
* gst-libs/gst/audio/gstringbuffer.h:
Sun's Forte compiler doesn't seem to like anonymous structs,
so use same setup as in GstBaseSrc (fixes#324900).
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
update strings, values are in microseconds
change the default sink buffer time to something that is smaller
(to help software volume mixing have a slightly lower delay) but
still be acceptable on Wim's laptop
Original commit message from CVS:
* gst-libs/gst/audio/TODO:
Updated TODO
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_open_device),
(gst_audioringbuffer_close_device), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release):
Small cleanups.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
Slave to the master clock when going to PLAYING and unslave when
going to PAUSED.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_open_device), (gst_ring_buffer_close_device),
(gst_ring_buffer_acquire), (gst_ring_buffer_release),
(gst_ring_buffer_samples_done), (gst_ring_buffer_set_sample),
(gst_ring_buffer_clear_all), (wait_segment),
(gst_ring_buffer_commit), (gst_ring_buffer_read),
(gst_ring_buffer_advance):
* gst-libs/gst/audio/gstringbuffer.h:
Add some docs and cleanups.
Original commit message from CVS:
* configure.ac:
added GST_LIB_LDFLAGS and GST_ALL_LDFLAGS
* gst-libs/Makefile.am:
* gst-libs/gst/audio/Makefile.am:
* gst-libs/gst/interfaces/Makefile.am:
* gst-libs/gst/net/Makefile.am:
* gst-libs/gst/riff/Makefile.am:
* gst-libs/gst/rtp/Makefile.am:
* gst-libs/gst/tag/Makefile.am:
* gst-libs/gst/video/Makefile.am:
and use them
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_read):
If we are reading too slowly, jump forward in the ringbuffer
instead of blocking.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_set_clock),
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
Fix for calibration API change.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_get_channel_positions),
(gst_audio_set_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Use gst_value_array_*() functions on value arrays, not
gst_value_list_*().
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_set_clock),
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
And we provide a clock by default, of course...
Original commit message from CVS:
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_init):
This clock can be slaved to a master clock now.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_init),
(gst_base_audio_sink_dispose), (gst_base_audio_sink_provide_clock),
(gst_base_audio_sink_set_clock),
(gst_base_audio_sink_set_property),
(gst_base_audio_sink_get_property), (gst_base_audio_sink_preroll),
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Handle slaving the internal clock to the clock selected in the
pipeline.
Add property to make the basesink not provide a clock.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_class_init), (gst_base_rtp_depayload_init),
(gst_base_rtp_depayload_wait):
* gst-libs/gst/rtp/gstbasertpdepayload.h:
We can use the clock in GstElement, no need to store it ourselves.
Original commit message from CVS:
* gst-libs/gst/audio/audio.c: (gst_audio_duration_from_pad_buffer):
* gst-libs/gst/audio/audio.h:
fix prototype - wondering why the test worked regardless
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_change_state):
Fix the audiosrc base class again, we did not unflush.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_provide_clock),
(gst_base_audio_sink_change_state):
Set ringbuffer to non-flushing when going to PAUSED, set to
flushing again when going to READY.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_init),
(gst_ring_buffer_stop):
Start in flushing mode by default.
Don't set flushing in the _stop method, let the app call
this explicitly.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_stop):
Set ringbuffer to flushing when stopping so that we don't
block on wait_segment anymore and livelock.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.h:
Don't break ABI.
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_caps_to_pixfmt):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_set_caps):
Some more comments.
Handle missing required caps fields better.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_get_offset),
(gst_base_audio_sink_render):
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_open_device), (gst_ring_buffer_close_device),
(gst_ring_buffer_set_flushing), (gst_ring_buffer_start),
(gst_ring_buffer_pause_unlocked), (gst_ring_buffer_pause),
(gst_ring_buffer_stop), (wait_segment), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
* gst-libs/gst/audio/gstringbuffer.h:
Add flushing mode to the ringbuffer so that it in all cases does
not try to handle more audio. This makes sure it does not try to
block anymore when flushing and fixes a livelock.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_offset), (gst_base_audio_sink_render):
Remove g_print
Use sync property from baseclass to disable sync.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_offset), (gst_base_audio_sink_render):
Buffers with no timestamps get aligned with previous buffers or
on underrun, played ASAP.
Original commit message from CVS:
* ext/theora/theoradec.c: (theora_dec_src_query),
(theora_dec_sink_event):
* ext/vorbis/vorbisdec.c: (vorbis_dec_src_query),
(vorbis_dec_sink_event), (vorbis_handle_identification_packet),
(vorbis_handle_data_packet):
* ext/vorbis/vorbisdec.h:
Fix old naming.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Don't try to sync on buffers without a timestamp.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read), (gst_ring_buffer_clear):
Don't assert on normal stuff.
* gst/playback/gstplaybin.c: (do_playbin_seek):
API fix.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Cleanups.
Commit and read from ringbuffer in samples rather than bytes.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Respect segment rate and accum when scheduling samples.
Original commit message from CVS:
* ext/alsa/gstalsasink.c:
Also allow unsigned int.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Small cleanup
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_stop):
Only actually wait for the thread to be stopped if it's
running.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_render):
If we receive EOS we can start playback of what we had.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c: (gst_base_audio_src_event),
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_read):
patch from Edgard Lima <edgard.lima@indt.org.br>
Fixed gstbaseaudiosrc adding ring buffer sync to it.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_loop):
Report the FLOW_RETURN as string in the error message.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_clear_all):
Don't assert when clearing an unnegotiated buffer.
Original commit message from CVS:
2005-10-02 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstringbuffer.c (gst_ring_buffer_clear)
(gst_ring_buffer_prepare_read):
* gst-libs/gst/audio/gstaudiosink.c (audioringbuffer_thread_func):
Demote to LOG.
Original commit message from CVS:
* check/generic/states.c:
* ext/ogg/gstoggdemux.c: (gst_ogg_pad_typefind):
* gst/playback/gstdecodebin.c: (gst_decode_bin_init):
Fixes for changes in registry API.
* configure.ac: Only export gst_plugins_desc. Add -no-undefined
to GST_PLUGIN_LDFLAGS.
* ext/libvisual/visual.c: Make the library shut up.
* gst-libs/gst/audio/audio.c: Don't define a plugin in a library.
* gst-libs/gst/audio/gstaudiofilter.c: same
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit):
* gst/volume/gstvolume.c: (gst_volume_class_init),
(volume_transform):
fixing lost sync, some more debugging
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Resync if the buffer timestamps drift more than a 10th
of a second.
