4053 commits

Author	SHA1	Message	Date
Sebastian Dröge	6b46019abf	playbin: Only put parsers and sinks first, not all non-decoders ... https://bugzilla.gnome.org/show_bug.cgi?id=722316	2014-01-18 13:33:57 +01:00
Wim Taymans	5df274f824	streamsplitter: handle ACCEPT_CAPS query correctly ... We can accept a caps when one of the downstream peers can accept the caps. This is not the same as checking a subset of the getcaps result because parsers might accept broader caps than what their getcaps function returns (See https://bugzilla.gnome.org/show_bug.cgi?id=677401). Fixes https://bugzilla.gnome.org/show_bug.cgi?id=722330	2014-01-16 16:32:34 +01:00
Wim Taymans	1fa70ac02d	videoconvert: don't interpolate chroma in I420 -> RGB ... Don't try to interpolate the chroma samples, the used algorithm only works for horizontal cositing. Let's switch to a faster and safer version until we handle chroma siting correctly in the fastpaths.	2014-01-13 17:24:01 +01:00
Vincent Penquerc'h	0d66d05c98	videotestsrc: fix unit test breaking on duration query ... The new switch caused breaks to not break of the main switch anymore, causing fall through.	2014-01-10 14:24:12 +00:00
Sebastian Dröge	b21a67f99e	videoconvert: Update disted orc files once again	2014-01-10 15:06:23 +01:00
Vincent Penquerc'h	1185fbd29a	videotestsrc: do not set TIME duration when asked for another format ... This fixes asserts in pipelines such as: gst-launch-1.0 videotestsrc num-buffers=1000 ! x264enc ! h264parse ! \ matroskamux name=mux ! filesink location=test.mkv	2014-01-10 09:56:34 +00:00
Sebastian Dröge	4ff4c1c10a	videoconvert: Update disted orc files	2014-01-10 09:21:30 +01:00
Wim Taymans	14b5999bca	videoconvert: rework YUV->RGB fastpaths ... Rework the orc code to be around 10% faster and support arbitrary matrices. Pass the matrix parameters to the YUV->RGB functions to make them work for all matrices. This enables more and faster fastpath conversions. See https://bugzilla.gnome.org/show_bug.cgi?id=721701	2014-01-09 18:19:59 +01:00
Wim Taymans	5ca04cb798	videoconvert: fix I420 to BGRA fast-path some more ... Calculate alpha value differently so that we can avoid running out of registers.	2014-01-09 18:08:41 +01:00
Wim Taymans	38e1541466	videoconvert: remove unused code	2014-01-08 16:20:12 +01:00
Stefan Sauer	86e6f10781	typefind: add support of BWF RF64 a 64bit wav variant ... Detect and describe the RF64 Broadcast Wave Format. Fixes #519220	2014-01-05 23:35:52 +01:00
Sebastian Dröge	eff7866dd0	videotestsrc: Always set pixel-aspect-ratio and interlace-mode in the fixed caps ... Otherwise our caps will not be compatible with elements that require a 1/1 pixel-aspect-ratio or progressive video. https://bugzilla.gnome.org/show_bug.cgi?id=721103	2013-12-30 19:48:29 +01:00
Edward Hervey	ed59e06c57	videorate: Remove useless assignement ... Was already set before	2013-12-30 13:45:04 +01:00
Matthieu Bouron	98e0dec715	playback: add ANY caps features to default audio/video raw caps ... Allows elements using audio/video caps features to be used by playbin.	2013-12-30 11:25:49 +01:00
Sebastian Dröge	cd4602ecfa	videoconvert: Fix I420 to BGRA fast-path alpha setting ... This fast-path was adding 128 to every component including alpha while it should only be done for all components except alpha. This caused wrong alpha values to be generated. Also remove the high-quality I420 to BGRA fast-path as it needs the same fix, which causes an additional instruction, which causes orc to emit more than 96 variables, which then just crashes. This can only be fixed in orc by breaking ABI and allowing more variables.	2013-12-23 14:56:15 +01:00
Sebastian Dröge	218d0702c9	subparse: Add support for parsing LRC subtitles ... https://bugzilla.gnome.org/show_bug.cgi?id=678590	2013-12-18 15:52:53 +01:00
Sebastian Dröge	bc2342e4ad	subparse: Add typefinder for LRC subtitles	2013-12-18 15:52:53 +01:00
Stefan Sauer	51038d70aa	pbutils: add typefinder and descriptions for audio/x-xi ... xi files can be read by libsndfile.	2013-12-17 18:06:12 +01:00
Wim Taymans	6db3b535eb	uridecodebin: copy sticky events	2013-11-29 17:30:09 +01:00
Wim Taymans	a7151d0b3e	decodebin2: copy sticky events	2013-11-29 17:26:13 +01:00
Tim-Philipp Müller	1d40b1d2bb	tcp: fix compilation with MSVC ... error C2440 at line 165 of gsttcpserversink.c type cast error: cannot convert from GSocket* to GstMultiSinkHandle	2013-11-28 16:24:13 +00:00
Wim Taymans	65e492a403	decodebin2: activate ghost pad before targetting ... Activate the decodebin2 pad before setting the target. This makes sure that the events are copied.	2013-11-28 11:27:23 +01:00
Sebastian Dröge	0e9806a03e	playsink: Fix visualizations if no visualization plugin was set ... https://bugzilla.gnome.org/show_bug.cgi?id=712280	2013-11-26 12:03:24 +01:00
Sebastian Dröge	eb7cae8033	typefind: Add typefinder for OpenEXR	2013-11-23 20:15:09 +01:00
Jihyun Cho	a81b2380cf	subparse: fix null pointer access in sami parser ... https://bugzilla.gnome.org/show_bug.cgi?id=712805	2013-11-21 16:34:04 +00:00
Tim-Philipp Müller	5d7125413e	subparse: g_memmove() is deprecated ... Just use plain memmove(), g_memmove() is deprecated in recent GLib versions. https://bugzilla.gnome.org/show_bug.cgi?id=712811	2013-11-21 15:19:47 +00:00
Tim-Philipp Müller	b1ff48c1a1	docs: remove old 0.10 Since markers ... They're just confusing.	2013-11-16 16:10:07 +00:00
Reynaldo H. Verdejo Pinochet	8d9dc05245	typefind: Fix identification of some MPEG files ... Make sure we begin by peeking at MPEG2_MAX_PROBE_LENGTH bytes. Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=678011	2013-11-14 23:46:12 -03:00
Thibault Saunier	ddf4ca2203	playback: Add subpicture/x-dvb as raw caps ... https://bugzilla.gnome.org/show_bug.cgi?id=710325	2013-10-30 22:28:43 +01:00
Antonio Ospite	fdfc6baf14	videoscale: fix adding borders when NV12 is used ... When the frame buffer is NV12 the borders are not added at all, fix that and fill them to black. https://bugzilla.gnome.org/show_bug.cgi?id=711003	2013-10-30 18:38:21 +01:00
Matthieu Bouron	22f411378e	videoconvert: remove unneeded guint comparaison ... https://bugzilla.gnome.org/show_bug.cgi?id=710760	2013-10-25 12:42:19 +01:00
Thibault Saunier	4305e1c33e	encodebin: Handle changes in encoding_profile::restriction during playback ... There are cases where we want to change the restrictions caps during playback, handle that in encodebin. https://bugzilla.gnome.org/show_bug.cgi?id=709588	2013-10-09 15:25:19 -03:00
Thiago Santos	c2eb3d4e71	videotestsrc: implement duration query ... Add duration query to videotestsrc, it can answer this query when the num-buffers property is set. https://bugzilla.gnome.org/show_bug.cgi?id=709646	2013-10-08 16:10:54 -03:00
Thiago Santos	866f132821	videotestsrc: implement reverse playback ... Decrement the n_frames counter when doing reverse playback to have timestamps and offsets reducing instead of increasing https://bugzilla.gnome.org/show_bug.cgi?id=701813	2013-10-08 09:34:47 -04:00
Matej Knopp	12f85c325d	audioconvert: Map buffer as READWRITE if the buffer and memory is writable ... and only use the input buffer as temporary buffer in that case. https://bugzilla.gnome.org/show_bug.cgi?id=709408	2013-10-04 14:02:06 +02:00
Sebastian Dröge	dd4fe544bc	playsink: If the visualisation is changing and reconfiguration is pending, do it all during reconfiguration ... Otherwise we will have two pad blocks that want to use the same mutex and block each other via the streamlock. https://bugzilla.gnome.org/show_bug.cgi?id=709210	2013-10-02 15:03:46 +02:00
Sreerenj Balachandran	ebaa714c9f	typefind: Add typefind function for H265 ... https://bugzilla.gnome.org/show_bug.cgi?id=708680	2013-10-01 23:14:33 +02:00
Thiago Santos	f8d8a56d7b	playbin: make sure elements are in null before disposing ... If a pipeline fails to preroll, it might happen that the sinks are put into READY state from playbin's sink activation, but they are never set to playsink, so they aren't being managed by a GstBin and will keep their READY state until they are unreffed, leading to a warning. Prevent this by always forcing them to NULL when deactivating a group https://bugzilla.gnome.org/show_bug.cgi?id=708789	2013-10-01 17:53:05 -03:00
MathieuDuponchelle	f330c01412	adder: Don't take channel mask in consideration in mono or stereo ... This could cause negotiation to fail. https://bugzilla.gnome.org/show_bug.cgi?id=708633	2013-09-28 13:32:58 +02:00
Matej Knopp	2f0993a95d	audiorate: clip buffer before pushing it ... https://bugzilla.gnome.org/show_bug.cgi?id=708953	2013-09-28 11:41:07 +02:00
Sebastian Dröge	cac572ec5d	playbin: Make sure to cache context types we did not store yet ... https://bugzilla.gnome.org/show_bug.cgi?id=708668	2013-09-24 12:47:26 +02:00
Mathieu Duponchelle	663f71a5dd	adder: send pending segment out before checking for EOS ... Otherwise there would be cases where it would not send its segment out when the first collected after getting it would already yield EOS. https://bugzilla.gnome.org/show_bug.cgi?id=708590	2013-09-24 10:04:37 +02:00
Sebastian Dröge	78b0e16773	playbin: Implement context caching for sinks that are not in playsink yet	2013-09-18 22:39:25 +02:00
Sebastian Dröge	e21d3d214a	playbin: No need to set the GstContext on the sink before activating it ... This is all handled by the GstBin code now.	2013-09-18 22:39:25 +02:00
Wim Taymans	58e6f33e35	videoscale: fix 4tap for RGB15 and RGB16 ... Fix component ordering, it's wrong in both the scanline and merge function so it cancels eachother out and isn't really a except for loss of precision of the green component. Fix calculation of the filter weight	2013-09-12 12:27:19 +02:00
Wim Taymans	1ede455199	videoscale: optimize merge for RGB15 and RGB16	2013-09-12 12:27:19 +02:00
Wim Taymans	b3e5d55040	videoscale: remove redundant MAX ... The checks above make it inpossible for the value to be smaller than what we check against with the MAX call.	2013-09-12 12:27:19 +02:00
Wim Taymans	a156fe4a1a	videoscale: fix RGB15 masks	2013-09-10 16:24:56 +02:00
Wim Taymans	85c572a57e	videoscale: simplify YUYV and UYVY linear scaling ... Simplify the code and make it handle odd width	2013-09-10 16:24:56 +02:00
Wim Taymans	ccf53052a0	videoscale: small cleanups ... Use BLEND macro Fix NV12 corner case	2013-09-10 16:24:56 +02:00
Wim Taymans	d365b68517	videoscale: fix RGB15 masks	2013-09-10 16:24:56 +02:00
Wim Taymans	d7c02f389f	videoscale: simplify nearest scaling ... Round the accumulator to avoid later checks Remove some bound checks that would never trigger Fix odd width scaling	2013-09-10 16:24:56 +02:00
Wim Taymans	c8cbcb6f02	videoscale: pick nearest line in scaling ... Use rounding to pick the nearest line instead of rounding down.	2013-09-10 16:24:55 +02:00
Loïc Minier	8492b956cd	playback: fix docs of convert-sample action signal ... convert-sample returns a GstSample, not a GstBuffer. https://bugzilla.gnome.org/show_bug.cgi?id=707660	2013-09-07 14:58:46 +01:00
Wim Taymans	9b4e2b4b36	videoconvert: disable fastpath for odd width on some formats	2013-09-06 12:45:36 +02:00
Wim Taymans	ede804041c	videotestsrc: flush pending lines on odd height	2013-09-05 17:46:03 +02:00
Wim Taymans	e97f6401de	videoconvert: add additional width/height constraints ... Some of the fastpath function can only work with aligned widht/height so make sure we check this as well when choosing a fastpath. Add fastpath for I420/YV12 -> BGRx	2013-09-05 17:22:50 +02:00
Wim Taymans	ce2b40670a	videoconvert: don't convert too much with odd width	2013-09-05 16:26:33 +02:00
Wim Taymans	700afbf6fd	videoconvert: handle lines in one go ... Handle odd heights in 1 go when no vertical subsampling is used.	2013-09-05 11:05:36 +02:00
Wim Taymans	ce2ad4ae4a	videoconvert: fix height round down	2013-09-05 11:04:03 +02:00
Wim Taymans	22da49a55c	videoconvert: also allocate temp lines in fastpath ... Some of the fastpath functions need tmplines, so make sure we allocate some in the fastpath too. This avoids SEGFAULTs with odd heights. See https://bugzilla.gnome.org/show_bug.cgi?id=663248	2013-09-04 17:36:29 +02:00
Wim Taymans	579be969e5	videoconvert: add more fastpaths ... Also reuse the I420 code for YV12 because it can handle the swapped UV fields just fine.	2013-09-04 15:10:50 +02:00
Alex Ashley	7240e2e38c	typefind: Added "dash" and "avc3" fourCC codes to qt_type_find. ... This commit adds detection of the "dash" and "avc3" compatible brands in qt_type_find. Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment (i.e. the first sample in each mdat box). The principal reason for avc3 is to make it easier for client implementations, because it removes the requirement to insert the SPS+PPS in to the decoder pipeline every time there is a representation change. https://bugzilla.gnome.org/show_bug.cgi?id=702004	2013-09-04 13:33:59 +02:00
Wim Taymans	c731f1cba0	videoconvert: only chroma subsample when needed	2013-09-03 17:37:14 +02:00
Wim Taymans	10b3b88e9c	videoconvert: fix handling of chroma resample ... Increase the number of temporary lines that we need, it is possible that the up and downsampling offsets are out of phase and that we need to keep some extra lines around. Also copy the unhandled output lines for the next round instead of overwriting them. Fixes https://bugzilla.gnome.org/show_bug.cgi?id=706823	2013-09-03 15:42:44 +02:00
Wim Taymans	cfb7b51c08	videoconvert: improve debug	2013-09-03 15:41:56 +02:00
Tim-Philipp Müller	0715e73725	audioconvert: improve fixate_format function readability even more ... Do the flags comparisons only once and re-use the result.	2013-08-23 19:47:57 +01:00
Tim-Philipp Müller	f317061b9c	audioconvert: simplify fixate_format function some more ... If we have no output format yet, any format will do. The !out_info condition existed in every path, so just split it our for clarity. KISS.	2013-08-23 19:43:14 +01:00
Tim-Philipp Müller	7a481c13ae	audioconvert: make fixate function more readable ... Use some variables to replace accessor macros to make code a little bit mor readable.	2013-08-23 19:11:17 +01:00
Tim-Philipp Müller	f448977dbd	audioconvert: remove unnecessary deep nesting in fixate function ... Makes it easier to read and removes two levels of indentation.	2013-08-23 18:53:48 +01:00
Sebastian Dröge	cebae4514a	audioconvert: If we have to lose precision, try to lose as less precision as possible ... https://bugzilla.gnome.org/show_bug.cgi?id=706624	2013-08-23 18:52:50 +02:00
Sebastian Dröge	ec9b17479d	typefind: Add typefinder for video/x-pva ... https://bugzilla.gnome.org/show_bug.cgi?id=158719	2013-08-22 14:23:43 +02:00
Carlos Rafael Giani	e8e8fa22f3	typefind: improved and extended typefinder for module music formats ... introduced new caps: audio/x-mod, modtype : { xm, okt, mod, ptm, ... } https://bugzilla.gnome.org/show_bug.cgi?id=706061	2013-08-19 10:32:26 +02:00
Sebastian Dröge	802d734a27	Revert "typefind: improved and extended typefinder for module music formats" ... This reverts commit 4c79f35c7a. It causes some MP4 files to be detected as mod files.	2013-08-16 12:12:05 +02:00
Carlos Rafael Giani	4c79f35c7a	typefind: improved and extended typefinder for module music formats ... introduced new caps: audio/x-mod, modtype : { xm, okt, mod, ptm, ... } https://bugzilla.gnome.org/show_bug.cgi?id=706061	2013-08-16 09:34:48 +02:00
Jie Yang	5640ba17c8	typefind: ADTS/AAC, find more aac sync to select correctly ... https://bugzilla.gnome.org/show_bug.cgi?id=691462	2013-08-15 13:26:38 +02:00
Sebastian Dröge	61c1d15ce7	playsink: Don't set sink to NULL if a new one is set while the old one is still in use	2013-08-14 15:43:53 +02:00
Tim-Philipp Müller	a2ebeb8357	gio: fix printf format compiler warning	2013-08-14 11:43:50 +01:00
Sreerenj Balachandran	81782144d9	typefind: Add typefind function for WebP image format ... https://bugzilla.gnome.org/show_bug.cgi?id=705826	2013-08-12 14:41:00 +01:00
Jonathan Matthew	cc1de5ae94	gio: make better use of the cached buffer ... When playing mp3 files from a smb server, we get 64k read requests that mostly overlap. Without using the cache to partially satisfy these, we send these requests straight to the server, resulting in a lot more network traffic than necessary. https://bugzilla.gnome.org/show_bug.cgi?id=705415	2013-08-12 15:24:31 +02:00
Sebastian Dröge	b22f046cbc	streamsynchronizer: Set proxy flags on the pads and use default event handler for simplicity ... https://bugzilla.gnome.org//show_bug.cgi?id=705555	2013-08-12 13:02:15 +02:00
Thibault Saunier	4afdc04089	adder: Raw buffers DTS should always be CLOCK_TIME_NONE	2013-08-06 15:11:05 +02:00
Thibault Saunier	a174ff25bc	adder: set DTS and PTS, sync on DTS	2013-08-06 12:25:44 +02:00
Arnaud Vrac	a8df760c96	playbin: check for tags on the right combiner instance ... The get-tags actions are not working in all cases, because the track number is used to resolve the stream combiner instead of the stream type. https://bugzilla.gnome.org/show_bug.cgi?id=705369	2013-08-03 17:17:10 +01:00
Edward Hervey	258aca37dd	videotestsrc: Demote ERROR statement back to DEBUG ... It crawled in with david's latest commit	2013-08-02 11:00:06 +02:00
David Schleef	0c4beda8f0	videotestsrc: Add pinwheel and spokes patterns	2013-07-31 11:37:33 -07:00
Matej Knopp	496dd67859	videorate: ignore GAP event ... videorate automatically fills gaps with the previous frames. https://bugzilla.gnome.org/show_bug.cgi?id=705048	2013-07-29 08:24:06 +02:00
Matej Knopp	470531d56e	audiorate: ignore GAP event ... audiorate automatically fills gaps with silence. https://bugzilla.gnome.org/show_bug.cgi?id=705048	2013-07-29 08:23:43 +02:00
Sebastian Dröge	b12cd5432a	multisocketsink: Fix handling of partial writes and WOULD_BLOCK errors	2013-07-28 13:52:28 +02:00
Sebastian Dröge	692fd81ac7	multifdsink: Update current time after every write ... Each write will update the last_activity_time and otherwise we would compare against a too old current time and immediately timeout because current time is smaller than last activity time (overflow).	2013-07-28 13:23:41 +02:00
Sebastian Dröge	930bfe3cbc	multihandlesink: Update current time after every write ... Each write will update the last_activity_time and otherwise we would compare against a too old current time and immediately timeout because current time is smaller than last activity time (overflow).	2013-07-28 13:22:17 +02:00
Edward Hervey	46ce07333b	videotestsrc: Initialize GstVideoInfo in ::start() ... Otherwise we end up with bogus values and races	2013-07-26 16:14:05 +02:00
Edward Hervey	96efe720a1	videotestsrc: Don't error on not-negotiated ... Base classes will handle re-negotiation if needed, but emitting an error message will make applications stop.	2013-07-26 16:14:05 +02:00
Edward Hervey	9dd0e6cccc	ext/gst: Ensure default query/event handlers are used ... And in some cases, just remove our implementation that does nothing	2013-07-26 16:08:35 +02:00
Tim-Philipp Müller	ef5c6d351f	typefinding: don't detect mp3 based on just a few bits ... Remove dodgy code that detects mp3 with as little as a valid frame sync at the beginning. This was only used in some unit tests in -good where there were only a few bytes after the id3 tag. We now require at least two frame headers. Fixes mis-dection of text files with UTF-16 LE BOM as mp3. https://bugzilla.gnome.org/show_bug.cgi?id=681368	2013-07-25 13:20:11 +01:00
Sebastian Dröge	0bd0c925e3	playsink: Remove two unused variables	2013-07-23 13:42:40 +02:00
Sebastian Dröge	e4b1a58675	subtitleoverlay: Remove some more unneeded segment tracking	2013-07-23 13:41:55 +02:00
Sebastian Dröge	436ea03362	playsinkconvertbin: Remove obsolete segment tracking ... This is now all handled automatically with sticky events.	2013-07-23 13:36:09 +02:00
Sebastian Dröge	f92da706fd	playbin: Ensure that everything in a GstSourceGroup gets the same group-id ... Including streams from external subtitle files. If not everything implements the group-ids playbin invents its own.	2013-07-23 12:42:50 +02:00
Sebastian Dröge	94fc577dd5	playsink: Fix handling of colorbalance element if the sink does not implement it	2013-07-23 12:35:46 +02:00
Sebastian Dröge	0947c7ab30	playsink: Improve segment handling in the custom flushing for subtitle stream switches ... This code needs a lot more work to be improved for 1.0.	2013-07-23 11:13:19 +02:00
Sebastian Dröge	33cba1054d	subtitleoverlay: Segment events are sticky now and propagated automatically when needed	2013-07-23 11:11:33 +02:00
Sebastian Dröge	d4b48ec70d	streamcombiner: Proxy all sink events downstream ... Thanks to Mathieu Duponchelle for noticing this regression introduced with the last change. https://bugzilla.gnome.org/show_bug.cgi?id=704706	2013-07-23 09:14:23 +02:00
Sebastian Dröge	2465895266	streamsynchronizer: Implement grouping of streams via the group-id ... https://bugzilla.gnome.org/show_bug.cgi?id=704427 https://bugzilla.gnome.org/show_bug.cgi?id=704408	2013-07-22 15:24:13 +02:00
Sebastian Dröge	9bd140d3b7	streamcombiner: Fix locking ... We have to hold the streams-lock when iterating over all pads, also the stream-lock of the pad is already locked when we receive EOS. Call gst_pad_event_default() for the correct default handling of events.	2013-07-22 08:08:27 +02:00
Mathieu Duponchelle	2f8b0f1e34	encoding: fix EOS handling in streamsplitter / combiner. ... This commit adds a streamcombinerpad with an is_eos field. When streamcombiner receives an EOS on one of its pads, it forwards it all its other pads are EOS. This commit also removes the notion of "stream-switching-eos".	2013-07-21 20:25:54 -04:00
Tim-Philipp Müller	7d16f95730	subparse: use g_strdup() and friends ... Fixes build issue on windows, but is also better seeing that these string are going to get freed with g_free() and not free().	2013-07-17 09:04:47 +01:00
Tim-Philipp Müller	3eea81e4a2	subparse: don't leak parse context for sami and qttext ... In gst_sub_parse_dispose() parser_type will be UNKNOWN, so these deinit calls were never executed. And we should clean up the parser state in the downwards state change anyway.	2013-07-16 18:31:46 +01:00
Young-Ho Cha	f597efe24b	subparse: remove libxml dependency for sami parser and re-enable sami parser ... To celebrate 2013.gnome.asia, updated sami parser for gstreamer 1.x. :D Remove conditional block for check libxml usage and implement a simple html markup parser for the sami parser. https://bugzilla.gnome.org/show_bug.cgi?id=693056	2013-07-16 18:04:02 +01:00
Sebastian Dröge	432b092247	playbin: Don't prefer decoders for which we found a matching sink ... It doesn't make much sense.	2013-07-16 12:21:44 +02:00
Sebastian Dröge	4cfda00120	playbin: Also consider possible converters for raw streams when selecting compatible sink/source combinations ... https://bugzilla.gnome.org/show_bug.cgi?id=704285	2013-07-16 11:22:35 +02:00
Sebastian Dröge	5ee98c146e	playbin: Fix sorting for decoder factories for which we didn't find a compatible sink ... They might just need some converters for raw audio/video. https://bugzilla.gnome.org/show_bug.cgi?id=704285	2013-07-16 09:32:31 +02:00
Sebastian Dröge	10c91ea5b5	playbin: Don't print a warning when setting a sink to NULL ... https://bugzilla.gnome.org/show_bug.cgi?id=704194	2013-07-15 09:10:30 +02:00
Sebastian Dröge	edecd7eec3	playbin: Properly destroy and set to NULL sinks that don't work	2013-07-12 12:05:37 +02:00
Alban Browaeys	f174c450c9	playbin: Fix logic to detect if a stream-change is currently pending ... Fixes duration reporting in gapless playback between files. https://bugzilla.gnome.org/show_bug.cgi?id=585969	2013-07-12 09:54:06 +02:00
Sebastian Dröge	9ab6ab4257	playbin: Only give sinks a new bus if they have no parent yet ... Otherwise we will remove the bus that would proxy messages to playsink and never set it again. If the sink is already in playsink, all failures are fatal anyway as it's either a sink that worked before or one that was set by the user. https://bugzilla.gnome.org/show_bug.cgi?id=701997	2013-07-10 17:17:05 +02:00
Sebastian Dröge	d7f1d9954f	playbin: Store a/v/t sinks locally too, not just in playsink	2013-07-10 13:22:04 +02:00
Sebastian Dröge	4c1fc76407	playsink: ref_sink() any sinks that are set on playsink ... Otherwise the behaviour of the properties is inconsistent.	2013-07-10 13:21:29 +02:00
Sebastian Dröge	043c1888f3	streamsynchronizer: Non-TIME segment streams are not waiting automatically ... This was leftover code from porting to 1.0 and fixes the playbin unit test. https://bugzilla.gnome.org/show_bug.cgi?id=701943	2013-07-10 13:00:21 +02:00
Sebastian Dröge	f68b6c2626	playbin: Change sink ownership handling to be a bit more sane ... playbin will now only activate the sinks in a single place and will never change the states of any sinks that are owned by playsink. Also handle text-sinks the same way as audio/video sinks inside playbin.	2013-07-09 14:57:05 +02:00
Thibault Saunier	38790e5757	adder: Do not send flush_start event with the stream lock taken ... FLUSH_START is not serialized, so the lock should not be taken when sending it.	2013-07-04 22:10:13 -04:00
Tim-Philipp Müller	ba32b2e16b	audioresample: make explicit that neon is disabled and why ... https://bugzilla.gnome.org/show_bug.cgi?id=703477	2013-07-03 09:44:32 +01:00
Carlos Rafael Giani	1b48d431f4	audioresample: disable 16-bit integer NEON support ... it seems to be broken (produces no audio), plus the performance gain is small Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>	2013-07-03 08:14:42 +02:00
Sebastian Dröge	7c28c180ec	playbin: If we had a previous autoplugged sink, try to reuse it ... https://bugzilla.gnome.org/show_bug.cgi?id=701997	2013-07-02 14:25:28 +02:00
Sebastian Dröge	b3a15872b7	playsink: If we switch sinks, make sure that the old sink is set to NULL	2013-07-02 14:18:20 +02:00
Sebastian Dröge	841d738f7c	playbin: Don't change the state of sinks that we passed to playsink already	2013-07-02 14:02:57 +02:00
Sebastian Dröge	c725591010	playsink: Consider new audio/video sinks when reconfiguring	2013-07-02 14:01:52 +02:00
Sebastian Dröge	a0e61534ef	playbin: Improve debug output regarding sink selection	2013-07-02 12:27:03 +02:00
Brendan Long	d3acb2b01a	playbin: Post an error message if a stream combiner doesn't return a request pad.	2013-07-02 09:34:19 +02:00
Sebastian Dröge	f39d1dc3b4	playbin: Only intersect to check if a sink can handle raw caps ... Doing a subset check requires fixed caps, which we might not have here. https://bugs.webkit.org/show_bug.cgi?id=116042	2013-07-01 13:46:51 +02:00
Vincent Penquerc'h	5a064ca423	typefind: avoid too low mpeg/ts probability on small amount of data ... With the current test, we get into problems when we try to typefind a MPEG stream from a small amount of data, which can happen when we get data pushed from a HTTP source. We thus make a second test to give higher probability if all the potential headers were either pack or pes headers (ie, no potential header was unrecognized). This fixes an issue with a MPEG1/MP2 stream being properly discovered as video/mpeg from a file, but as audio/mpeg from souphttpsrc. https://bugzilla.gnome.org/show_bug.cgi?id=703256	2013-07-01 11:08:24 +02:00
Patricia Muscalu	f9acd972ef	videotestsrc: do not leak lines ... Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703177	2013-06-27 12:39:47 +02:00
Sreerenj Balachandran	8a2dbeb1ef	playsink: Fix the block diagram of deinterlace bin. ... Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702465	2013-06-17 16:28:44 +02:00
Brendan Long	b5f7a621bb	playbin: Emit {audio,text,video}-changed signals when pads are removed ... https://bugzilla.gnome.org/show_bug.cgi?id=702195	2013-06-14 14:23:11 +02:00
Sebastian Dröge	eb09e561c4	videoconvert: Fix leaking of the chroma resample helper objects	2013-06-11 15:24:05 +02:00
Sebastian Dröge	15375861b5	adder: Reject segments that have a different rate than the output segment ... adder does no rate conversion.	2013-06-09 19:20:20 +02:00
Sebastian Dröge	4465741222	playbin: When activating a fixed sink, proxy error messages too ... If activating a fixed sink fails, everything will fail later anyway and we can just error out early.	2013-06-08 23:51:13 +02:00
Sebastian Dröge	44352deadb	playbin: Improve autoplugging of decoder/sink combinations by trying to activate the sink ... And if that fails don't bother autoplugging that sink. Also gives us more accurate sink caps.	2013-06-08 23:34:53 +02:00
Sebastian Dröge	ff8839d97b	playbin: Proxy the playbin context to the sinks	2013-06-08 23:22:54 +02:00
Sebastian Dröge	77af24c493	playbin: Proxy sink messages if we activate a sink in playbin already ... This makes sure the application gets any context related messages and can do whatever is required to a) get the sink a context or b) share the context with other elements in the pipeline. The proxying is necessary because the sink is not a child element of playbin, but instead will at a later point be a child of some bin inside playsink. https://bugzilla.gnome.org/show_bug.cgi?id=700967	2013-06-08 23:22:54 +02:00
Sebastian Dröge	c49531f1b7	decodebin: Let serialize queries before caps events through ... Otherwise we're going to deadlock forever because no autoplugging happens without having caps, but caps can never be send because we're blocking. Serialized queries before caps should never be sent unless really necessary.	2013-06-06 15:57:49 +02:00
Sebastian Dröge	ff5d3313d4	Release 1.1.1	2013-06-05 18:31:27 +02:00
Sebastian Dröge	cc5a476fc6	adder: Add GstChildProxy interface for the sinkpads ... This allows to set the sinkpad properties more easily. Next step: Implement proper synchronization in adder, almost done!	2013-05-30 23:56:52 +02:00
Sebastian Dröge	349174b48e	adder: Hold object lock in setcaps a bit longer to prevent race conditions	2013-05-30 23:56:52 +02:00
Sebastian Dröge	dde8d8919d	adder: Simplify segment event handling ... We don't care about upstream segments but generate our own. This makes the code more similar to videomixer again.	2013-05-30 23:56:52 +02:00
Sebastian Dröge	2953810ba5	adder: Use gst_audio_info_is_equal() to check if we get the same caps	2013-05-30 23:56:52 +02:00
Sebastian Dröge	0693b78e86	adder: Don't calls gst_pad_set_caps() on sinkpads ... It doesn't make much sense and the CAPS query handling on the sinkpads should handle this.	2013-05-30 23:56:52 +02:00
Sebastian Dröge	5e63a0f674	adder: Set GAP flag on silence buffers we created	2013-05-30 23:56:52 +02:00
Sebastian Dröge	667b856cbc	adder: Remove caching of the processing function ... The compiler will generate a hashtable from the switch-case, and we need to call functions explicitely for the volume!=1.0 cases anyway.	2013-05-30 23:56:52 +02:00
Sebastian Dröge	a76ade2d78	adder: Add support for per-stream volumes	2013-05-30 23:56:52 +02:00
Sebastian Dröge	addb07bc58	adder: Add optimized orc code for F64 processing	2013-05-30 23:56:52 +02:00
Sebastian Dröge	308c8fef68	adder: The output buffer must be readable and writable	2013-05-30 23:56:51 +02:00
Sebastian Dröge	509246cbac	adder: Add support for muting individual pads	2013-05-30 23:56:51 +02:00
Sebastian Dröge	3974379a7f	adder: Sync pad properties with the GstController	2013-05-30 23:56:51 +02:00
Sebastian Dröge	561ce54b27	adder: Add custom GstPad subclass to hold additional data and properties ... This will later allow to set per-stream volumes and mute status.	2013-05-30 23:56:51 +02:00
Wim Taymans	00bbca2f9f	videoconvert: free tmplines correctly ... Keep track of how many tmplines we allocated and use that to free the correct amount of lines. Fixes https://bugzilla.gnome.org/show_bug.cgi?id=701234	2013-05-30 05:27:31 +02:00
Daniel Drake	d32d2f0b14	playsink: pass translated color balance value to channel ... We found a case where untranslated values were being passed from the proxy to the underlying channel, causing bad color balance values in some setups. Thanks to Sebastian Dröge for clarifying how the code works, and suggesting the fix. Fixes https://bugzilla.gnome.org/show_bug.cgi?id=701202	2013-05-29 20:20:10 +02:00
Brendan Long	96aab6d8a5	playbin: Don't take an extra reference to the custom stream combiners ... They are automatically reffed when added to the bin because they're already not floating anymore.	2013-05-29 20:12:48 +02:00
Sebastian Dröge	0dee7777ff	playbin: Set custom stream-combiners to NULL and unref before finalizing	2013-05-29 10:35:11 +02:00
Brendan Long	53caa99a59	playbin: Rename select to combine and selector to combiner in playbin	2013-05-29 09:53:34 +02:00
Brendan Long	ba5f6cfe72	playbin: Add support for custom stream-combiners ... This allows to chose something else than input-selector for multiple audio/video/text streams, e.g. an adder could be used for audio. It is needed for example to implement some of the more advanced HTML5 video features. https://bugzilla.gnome.org/show_bug.cgi?id=698851	2013-05-29 09:52:32 +02:00
Sebastian Dröge	14192c031a	decodebin: Don't call autoplug-query on shutdown ... And remove leftover debug code	2013-05-28 13:32:23 +02:00
Sebastian Dröge	e482b5b8e6	playbin: In autoplug-queries, add the actual decoder/parser/etc template caps ... Add the actual decoder/parser/etc caps at the very end to make sure we don't cause empty caps to be returned, e.g. if a parser asks us but a decoder is required after it because no sink can handle the format directly.	2013-05-28 13:23:40 +02:00
Sebastian Dröge	a4ec6fe0b7	playbin: Forward CONTEXT queries to the corresponding sink if we have one ... https://bugzilla.gnome.org/show_bug.cgi?id=700967	2013-05-28 13:14:15 +02:00
Sebastian Dröge	e5064ee723	playbin: Refactor autoplug-query handling ... We now only check sinks and factories of the corresponding media type. It doesn't make sense to pass audio/subtitle caps to a video decoder.	2013-05-28 13:08:00 +02:00
Sebastian Dröge	d366613401	decodebin: Block on serialized queries too ... Otherwise we will only block after the serialized, non-sticky event after the CAPS event or the first buffer. If we're waiting for another pad to finish autoplugging after we got final caps on this pad, it will mean that we will let the ALLOCATION query pass although the pad is not exposed yet.	2013-05-28 13:06:15 +02:00
Sebastian Dröge	9513b770f4	decodebin: Pass the element in the autoplug-query signal too	2013-05-28 12:10:33 +02:00
Sebastian Dröge	730e633d58	decodebin: Need to lock the chain mutex in autoplug_query	2013-05-28 11:40:51 +02:00
Sebastian Dröge	b86267b5be	playsinkconvertbin: Fix leak of the downstream caps filter	2013-05-28 11:36:58 +02:00
Sebastian Dröge	db8d53bc17	playbin: Refactor autoplug-query handling a bit	2013-05-28 11:05:21 +02:00
Wim Taymans	7b8ff707b6	videoconvert: run chroma resamplers ... Run the chroma upsampler after unpack and the chroma subsampler before pack for higher quality conversions and correct chroma siting.	2013-05-27 11:05:08 +02:00
Wim Taymans	e5bc2b0d05	videotestsrc: subsample chroma before packing ... Run the chroma subsampler before packing.	2013-05-27 11:05:08 +02:00
Wim Taymans	4f2e1b46a7	videoconvert: reformat	2013-05-27 11:05:06 +02:00
Wim Taymans	620e3aad07	videoconvert: actually use the input pixels ... Operate on the provided pixels array instead of the temp array.	2013-05-27 11:05:06 +02:00
Sebastian Dröge	92af499eb7	typefind: Ensure we have enough data when reading the sync marker in the AAC/LOAS typefinder	2013-05-24 17:43:53 +02:00
Sebastian Dröge	fa7ad8743c	decodebin: Lock the state of child elements as long as we manage their states ... https://bugzilla.gnome.org/show_bug.cgi?id=690420	2013-05-24 13:41:46 +02:00
Sebastian Dröge	be4dba23ea	Revert "decodebin2: use NO_RESYNC flag" ... This reverts commit 0feecef275.	2013-05-24 11:47:13 +02:00
Sebastian Dröge	ca1279e4a3	decodebin: Use signal handler IDs instead of disconnecting by function ... This is cleaner and faster.	2013-05-22 17:29:17 +02:00
Sebastian Dröge	504e57ccc5	decodebin: Connect and disconnect the have-type signal of typefind before starting/shutting down	2013-05-22 13:49:18 +02:00
Sebastian Dröge	f4952a9baf	typefind: Add variant=itu to the h263 typefinder caps ... https://bugzilla.gnome.org/show_bug.cgi?id=700770	2013-05-22 10:58:10 +02:00
Sebastian Dröge	1756f86042	playsink: Use signal handler IDs instead of disconnecting/blocking by function ... This is cleaner and faster.	2013-05-21 16:35:18 +02:00
Sebastian Dröge	d802c7395a	playback: Only do a subset filtering for the factories if we have fixed caps ... Otherwise we're plugging a parser/converter currently and have unfixed caps.	2013-05-15 17:15:18 +02:00
Sebastian Dröge	062246fc6e	decodebin: Return immediately from checking if a chain is complete if we're shutting down	2013-05-15 14:51:16 +02:00
Sebastian Dröge	83f2476976	decodebin: Hold the expose lock when freeing a chain ... https://bugzilla.gnome.org/show_bug.cgi?id=700342	2013-05-15 14:47:53 +02:00
Sebastian Dröge	74a31a02fc	playbin: Fix deadlock caused by lock order inversion ... First the source group lock, then the elements list lock.	2013-05-15 13:38:32 +02:00
Sebastian Dröge	450a47c0a5	playback: Use subset checks instead of intersection ... https://bugzilla.gnome.org/show_bug.cgi?id=700272	2013-05-14 10:07:44 +02:00
Sebastian Dröge	b19d64d785	subparse/ssaparse: Fix event handling and order	2013-05-10 12:21:31 +02:00
Mathieu Duponchelle	aec0e48aa1	videorate: Reset base timestamp and out_frame_count in any case on SEGMENT_EVENT ... Fixes #699187	2013-05-09 16:22:13 +02:00
Sebastian Dröge	b0ec886cb9	playbin2: Chose more balanced metric to compare ranks of decoder/sink combinations	2013-05-09 15:05:21 +02:00
Sebastian Dröge	b23f4e4ab9	playbin: Fix infinite loop in GSequence iteration code	2013-05-08 21:27:17 +02:00
Sebastian Dröge	4c52518ef5	uridecodebin: Always store queue2 elements for later removal ... Otherwise we accumulate more and more queue2 elements, and let each of them start a thread doing nothing but waiting each time uridecodebin goes to PAUSED. https://bugzilla.gnome.org/show_bug.cgi?id=699794	2013-05-08 14:52:18 +02:00
Andoni Morales Alastruey	3ad2dec005	typefind: fix detection of HLS playlists with alternative renditions ... https://bugzilla.gnome.org/show_bug.cgi?id=699923	2013-05-08 13:23:52 +02:00
Sebastian Dröge	7ff4f8f4d4	playbin: Use the GSequence more efficiently ... This makes it possible to take advantage of the O(log n) lookups of GSequence on the ~1000 element lists and only do iterations on <10 element lists. Previously the code iterated over ~1000 element lists multiple times.	2013-05-07 15:23:05 +02:00
Sreerenj Balachandran	52c5115ff0	playbin: Use GSequence instead of GList to store the GstAVElement list. ... The GstAVElement list might be big. Use GSequence to optimize it.	2013-05-07 15:23:05 +02:00
Sreerenj Balachandran	a8d1b45491	playbin: autoplug the audio/video decoders and sinks based on capsfeatures. ... Autoplug the decoder elements and sink elements based on the number of common capsfeatures if the ranks are the same. This will also helps to autoplug the h/w_decoder and h/w_renderer. https://bugzilla.gnome.org/show_bug.cgi?id=698712	2013-05-07 15:23:05 +02:00
Sebastian Dröge	b719dd9f89	decodebin: Expose pads when they receive EOS before any buffers ... Stops decodebin from waiting forever to expose a pad if there is never data on it. https://bugzilla.gnome.org/show_bug.cgi?id=691072	2013-05-06 15:49:00 +02:00
Thibault Saunier	b940cba826	streamsplitter: Keep srcpad alive while querying peer	2013-05-02 12:29:48 +01:00
Thibault Saunier	372eddf00e	adder: Get collectpad stream lock when fowarding flush events ... Fixes #698410	2013-05-02 12:29:48 +01:00
Tim-Philipp Müller	04a70ea835	typefindfunctions: minor SSA typefinder clean-up ... Remove code that doesn't make sense as it is. If there's a 2-byte UTF-16 BOM or a 4-byte UTF-32 BOM, the following text won't be 8-bit ASCII.	2013-04-28 18:56:28 +01:00
Sebastian Dröge	7f6e1bdfdb	tcp: Use the generic marshaller instead of generating custom ones	2013-04-25 09:20:29 +02:00
Sebastian Dröge	e06cc5295a	tcp: Add FIXME comment for 2.0 to rename "host" to "bind-address" for the server elements	2013-04-25 09:06:33 +02:00
Sebastian Dröge	9c5c0ca878	streamsynchronizer: Fix check for belonging to another stream ... https://bugzilla.gnome.org/show_bug.cgi?id=697820	2013-04-24 11:11:41 +02:00
Tim-Philipp Müller	88acbd60cd	typefindfunctions: fix crash in new MSS typefinder ... Fixes icydemux test_first_buf_offset_when_merged_for_typefinding unit test segfaulting on a NULL pointer.	2013-04-24 00:08:15 +01:00
Wim Taymans	c5840ebbd9	decodebin2: also remove the bytes limit ... Remove the byte limit for adaptive http streaming. Because some fragments might be very big, we might need a lot of buffering. I also suspect another problem where data is actually missing and things go out of sync somehow.	2013-04-23 11:20:28 -03:00
Wim Taymans	26c5bc1ce4	decodebin2: update buffer size in multiqueue ... When we disable buffering in the more upstream multiqueue elements, we need to also update the queue limits. In particular, the max_size_time should be set to 0 or else we might simply deadlock.	2013-04-23 11:20:28 -03:00
Thiago Santos	5cd07bd2af	decodebin2: only allow 'lower' multiqueues to emit buffering messages ... When we have a scenario of demuxers linked to demuxers, decodebin2 will create multiqueue at different levels of the pipeline. The problem is that only the lowest multiqueue's should do the buffering messaging, as they will handle with the raw streams data. When all multiqueues are doing buffering, the upper ones can handle large buffers that easily fill them, moving from 0% to 100% from buffer to buffer, causing too much buffering messages to be posted. This hangs the pipeline unnecessarily and might lead to deadlocks.	2013-04-23 11:20:28 -03:00
Thiago Santos	6382d4c0ad	decodebin2: do not handle the next-groups list as if it was a single item ... Decodebin2's chains store a next_groups list that was being handled as it could only have a single element. This is true for most of the chaining streams scenarios where streams change not very often. In more stressfull changing scenarios, like adaptive streams, those changes can happen very often, and in short time intervals. This could confuse decodebin2 as this list was always being used as a single element list. This patches makes it handle as a real list, using iteration instead of picking the first element as the correct one always.	2013-04-23 10:32:19 -03:00
Thiago Santos	054ffc6e2b	decodebin2: preserve next groups order	2013-04-23 10:32:19 -03:00
Thiago Santos	42db7c7b08	decodebin2: still report chain as drained when not 'handled' ... Even if the chain hasn't been 'handled' in this switching round, report it as drained so upper chains/groups know abou it. This makes switching happen on upper levels of the groups/chain trees	2013-04-23 10:32:19 -03:00
Thiago Santos	ce20bc1dc0	typefind: add smoothstreaming manifest typefinding ... Checks if the received XML is a smoothstreaming manifest in both UTF8 and UTF16 formats. The check is made for a SmoothStreamingMedia top level element. Conflicts: gst/typefind/gsttypefindfunctions.c	2013-04-23 10:32:19 -03:00
Sebastian Dröge	d77f76049e	streamsynchronizer: Don't consider a stream added for an already running one as "new" ... Fixes enabling visualizations after disabling them after they were enabled already.	2013-04-23 13:54:49 +02:00
Sebastian Dröge	2e017bd595	streamsynchronizer: If a stream belongs to an already running stream, don't wait ... This fixes enabling visualizations after the audio stream already started. https://bugzilla.gnome.org/show_bug.cgi?id=697820	2013-04-23 13:19:38 +02:00
Tim-Philipp Müller	f5c0d61be7	Update disted orc backup files ... Generated with 0.4.17 now.	2013-04-22 13:58:33 +01:00
Tim-Philipp Müller	830926e47d	uridecodebin: don't report 'no uri handler found' if the URI was rejected by a source ... If a source element could be created for a URI, but all elements rejected the URI for some reason, propagate the error from the URI handler instead of reporting a 'no uri handler found for protocol xyz' error, which is confusing. Fixes error reporting with dvb:// URIs when the channel config file could not be found or not be parsed or the channel isn't listed. https://bugzilla.gnome.org/show_bug.cgi?id=678892	2013-04-21 17:30:58 +01:00
Thibault Saunier	fbe80a688d	adder: Do not try to wait for flush_stop after receiving a segment event ... + Add a simple test	2013-04-21 16:11:41 +02:00
Stefan Sauer	fa9c0cdf6e	volume: skip controlled processing if we have no timestamp	2013-04-21 16:11:41 +02:00
Sreerenj Balachandran	9c94a1812f	playbin: use _plugin_feature_rank_compare API instead of duplicating the code.	2013-04-18 13:59:52 +02:00
Sreerenj Balachandran	8cf6049643	decodebin: use _plugin_feature_rank_compare API instead of duplicating the code.	2013-04-18 13:59:36 +02:00
Philippe Normand	26fb72cf65	uridecodebin: query bandwidth capability to source element ... Use a scheduling query to check if the source element has some bandwidth limitations. If this is the case on-disk buffering might be used. If the source element doesn't handle the scheduling query then fallback to checking the URI protocol against the hardcoded list of protocols known to handle buffering already. Fixes bug 693484.	2013-04-16 16:47:28 +02:00
Sebastian Dröge	948a4a3632	gst: Add better support for static plugins	2013-04-15 15:52:58 +02:00
Sreerenj Balachandran	9b33c75cd4	playbin: use ascending order for name based sorting of pluginfeatures. ... The compare_factories_func() should return negative value if the rank of both PluginFeatures are equal and the name of first PluginFeature comes before the second one (== ascending order).	2013-04-15 12:05:22 +02:00
Sreerenj Balachandran	f07eb23728	decodebin: use ascending order for name based sorting of pluginfeatures. ... The _decode_bin_compare_factories_func() should return negative value if the rank of both PluginFeatures are equal and the name of first PluginFeature comes before the second one (== ascending order).	2013-04-15 12:05:16 +02:00
Tim-Philipp Müller	1c0288db38	playbin: fix jpeg passthrough to decoder sinks by marking image/* as video stream	2013-04-12 11:51:30 +01:00
Sebastian Dröge	882677eb8e	videoscale: Allow passthrough for ANY caps features	2013-04-08 08:30:38 +02:00
Sebastian Dröge	d0133a2d11	videoconvert: Allow passthrough for ANY caps features	2013-04-08 08:30:38 +02:00
David Schleef	c07efdabd8	videoscale: set reasonable limits on properties ... Properties sharpen, sharpness, and envelope are only useful near their default values. Decrease ranges to avoid brokenness. https://bugzilla.gnome.org/show_bug.cgi?id=682171	2013-04-06 13:19:44 -07:00
Stefan Sauer	c2b34b05de	videoscale: set min value to DBL_MIN to avoid a value of 0.0 that would crash	2013-04-05 22:39:43 +02:00
Wim Taymans	92b77c5aa4	decodebin2: forward all sticky events to decodepad ... Forward all sticky events to the decodepad before exposing the pads. This makes sure all sticky events are on the exposed pad. Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696915	2013-04-04 15:00:52 +02:00
Wim Taymans	c082c06b6c	decodebin: debug sticky events on exposed pads	2013-04-04 14:53:32 +02:00
Wim Taymans	08dd2454cd	decodebin2: small cleanup ... Take the event from the probe just once.	2013-04-04 14:37:15 +02:00
Wim Taymans	34eea4d5f2	streamsynchronizer: update position for reverse ... When doing reverse playback the positino advances from timestamp_end to timestamp.	2013-03-31 12:57:35 +02:00
Edward Hervey	b3d94bd0e4	encodebin: Add action signal to get pad for a given profile ... This allows getting a pad for a specific encoding profile, which can be useful when there are several stream profiles of the same type. Also update the encodebin unit tests so that we check that the returned pad has the right caps. https://bugzilla.gnome.org/show_bug.cgi?id=689845	2013-03-31 12:02:05 +02:00
Wim Taymans	bc4238f959	videoconvert: use one matrix function ... Use only one matrix function pointer, let the implementation cast the pixels to the right size.	2013-03-30 19:14:40 +01:00
Wim Taymans	43a9bfae78	videoconvert: use one temp array for lines ... Use only one temporary array for pixels.	2013-03-30 19:14:40 +01:00
Sebastian Dröge	3475d4f457	decodebin: Remove GstdecodePads that are not going to be exposed ... This makes sure that they're unlnked and don't cause any errors or block the pipeline.	2013-03-30 17:17:04 +01:00
Sebastian Dröge	7f78f7f9e3	playbin: Ignore caps from audio/video sink factories if there are fixed sinks already	2013-03-30 12:15:38 +01:00
Sebastian Dröge	57a0806b3a	playbin: Handle caps queries from unlinked elements ... Pass them to all possible sinks and the current sinks to allow elements to chose a more optimal initial caps.	2013-03-30 11:49:42 +01:00
Sebastian Dröge	0932391d3f	decodebin: Add autoplug-query signal to handle queries for yet unconnected elements ... This allows playbin to answer the CAPS query with the possible sink caps for example, and allows decoders to chose more optimal caps.	2013-03-30 11:49:42 +01:00
Sebastian Dröge	9ce0818c7d	decodebin: Don't add a children to a decode group twice ... This can happen if a demuxer does not provide fixed caps from the beginning but only sets them later.	2013-03-30 11:49:42 +01:00
Stefan Sauer	fbf2647f3e	audiotestsrc: fix a comment typo from previous commit	2013-03-29 17:16:17 +01:00
Stefan Sauer	f68c95ebaa	audiotestssrc: truncate the seek pos to the sample and round the time ... Before it was done the other way around and that can trigger the assert that already is in place. This also makes more sense; when seeking to time x, we want then sample that is <= that pos.	2013-03-29 16:46:14 +01:00
Wim Taymans	701ae2f144	videoconvert: respect the pack_lines when packing ... Packing is supposed to happen on the amount of lines specified in the format info. It's currently all set to 1 but that will change.	2013-03-28 18:16:09 +01:00
Wim Taymans	33a54ba4f3	videoconvert: be smarter when selecting a conversion ... Try to select the conversion that would result in the minimal amount of quality loss. Quality loss is calculated rather arbitrarily but it avoids doing something really stupid in most cases.	2013-03-28 18:15:24 +01:00
Wim Taymans	3532323817	videoconvert: small cleanup	2013-03-28 18:15:24 +01:00
Stefan Sauer	f19acfc60b	uridecodebin: remove commented code ... This is dead since ~6 years.	2013-03-28 12:36:51 +01:00
Stefan Sauer	8c390fe80a	audiotestsrc: simplify the caps ... Drop channel-mask as we only do mon/stereo and channel-mask is optional in these cases.	2013-03-25 16:47:02 +01:00
Simon Berg	f18d2a5a9a	audiotestsrc: fix rounding errors that might cause segments to be one sample too short ... https://bugzilla.gnome.org/show_bug.cgi?id=676884	2013-03-24 20:53:05 +00:00
Simon Berg	d8b42e993b	audiotestsrc: fix buffer size of last buffer ... The last buffer before EOS may be smaller than the maximum size. The current code doesn't adjust for this, it only sets the duration and offsets. https://bugzilla.gnome.org/show_bug.cgi?id=696411	2013-03-24 20:53:05 +00:00
Wim Taymans	a092cbee5e	videoconvert: avoid double free ... Set variable to NULL after free so that we don't free twice.	2013-03-24 00:38:22 +01:00
Wim Taymans	b1950b6409	Revert "videoconvert: prevent bad interlaced conversions" ... This reverts commit adc9694ed7. No need to restrict the conversion, we can handle interlace correctly. We basically unpack each field, then convert each field to the target colorspace and pack and interleave each field to the target format. We also disable any fast path that can't deal with interlaced formats.	2013-03-24 00:21:36 +01:00