Commit graph

386 commits

Author SHA1 Message Date
Jonas Bonn
2f6ad787b2 multiudpsink: allow binding to IPv6 address
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6.  When binding to an IPv6 address, this
results in the following error:

gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)

This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
2022-04-22 10:43:13 +00:00
Camilo Celis Guzman
5eadde319c rtphdrextsdes: fixup test trying to g_free a local variable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2235>
2022-04-22 08:41:59 +00:00
Edward Hervey
964ee0299d hls/m3u8: Fix starting segment for live playlist
RFC 8216 6.3.3 "Playing the Media Playlist File" : states that for live media
playlists "the client SHOULD NOT choose a segment that starts less than three
target durations from the end of the Playlist file"

This is an off-by-one error. Since we are looking for the "index" of the
segment, we need to subtract 1 from the searched position.

Ex: For a playlist with 12 entries, we want to start playback on the 9th segment
... which is at index 8.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2259>
2022-04-22 08:06:27 +00:00
Edward Hervey
8f2d347559 hls: Relax webvtt checks
If no hour field is present (which is allowed), the remaining data can be less
than 15 character.

Fix time translation failures if the hour field wasn't present

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2248>
2022-04-20 17:47:00 +00:00
Sebastian Dröge
02115a5efc rtpmanager: Move some duplicated constant and helper function to a single place
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
c7e12974ba rtpbin/rtpjitterbuffer: Don't parse RTCP SRs twice unless needed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
82169aa140 rtpjitterbuffer: Add property to throttle handling of RTCP SR / NTP-64 syncing
This proxies the "rtcp-sync-interval" property of rtpbin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
ce38614e1a rtpsession: Handle RTCP-SR-REQ (RFC6051) RTCP feedback message
This causes an RTCP SR to be sent at the earliest possible time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
0c819d2f31 rtpbin/rtpjitterbuffer: Allow syncing to an SR without CNAME if the CNAME is already known
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
cbaac3cdba rtpbin/jitterbuffer: Use inband 64-bit NTP timestamps according to RFC6051 for faster synchronization
When signalled via the caps that the header extension is used, it will
be read and used in the same way as the RTP/NTP time mapping from RTCP
SRs.

If the CNAME of the stream's SSRC is provided out of band via e.g. the
SDP then this allows streams to be synchronized immediately on the first
packet instead of having to wait for the first RTCP SR to arrive.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/383

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
7c796b3c05 rtpsession: Only add send latency to the running time if it is actually known
Otherwise we can't know the running time yet if rtcp-sync-send-time is
set, and have to wait until the latency is known later.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
7ffc830959 rtpsession: Update 64-bit NTP header extensions with the actual NTP time in senders
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
8980c35efe rtpmanager: Add header extension implementation for the 64-bit RFC6051 NTP header extension
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Xavier Claessens
e950095867 Always define ENABLE_NLS
GLib guarantees libintl API is always available, provided by
proxy-libintl as last resort. GLib itself unconditionally define
ENABLE_NLS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
82ca0e291b Delete unused i18n headers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
b99ecc78ca Replace gst-i18n-*.h with gi18n-lib.h
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Tim-Philipp Müller
0dd04764f7 tests: dash_mpd: fix linker issues with non-optimizing compilers
undefined reference to `download_request_take_buffer'

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117#note_1344646

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2228>
2022-04-19 10:35:30 +00:00
Ruben Gonzalez
70579285a8 gst_plugin_load_file: force plugin reload if diff filename
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.

This seems to have also fixed some documentation issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
2022-04-19 14:26:08 +05:30
Edward Hervey
af78c16dd5 New HLS, DASH and MSS adaptive demuxer elements
This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.

These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).

Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.

Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>
2022-04-18 14:11:23 +00:00
Hou Qi
8dcb8a28af v4l2videodec: copy colorimetry values to output_state caps
This is to avoid transcoding negotiation fail between v4l2h265dec
and v4l2h264enc caused by colorimetry mismatch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2192>
2022-04-18 13:17:55 +00:00
Brad Hards
488b760e7e tests: rename 'icles' subdir to be more descriptive
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2178>
2022-04-14 11:57:11 +00:00
Havard Graff
71891e5647 qtdemux: fix leak of channel_mapping
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2179>
2022-04-14 19:41:36 +09:00
Ming Qian
030d749019 doc: Update cache after NV12_8L128 and NV12_10BE_8L128 addition
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>
2022-04-13 07:20:58 +00:00
Ming Qian
dce02a870e v4l2: Add NV12_8L128 in gst_v4l2_object_get_caps_info
It should be included in
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1379>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>
2022-04-13 07:20:58 +00:00
Ming Qian
6af66167d0 v4l2: Add a missed break
Fix a typo that miss a break in the switch statement

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>
2022-04-13 07:20:58 +00:00
Robert Rosengren
e4a6521ac7 rtpbin: Fix division by zero when using ts-offset-smoothing-factor
avg_ts_offset may cause division by zero when calculating potential
overflow protection. This fix will avoid the division.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2151>
2022-04-11 15:29:49 +02:00
Tristan Matthews
86f0f8b67f rtpopusdepay: assume 2 channels if sprop-stereo is missing
Fixes #1064

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2125>
2022-04-08 13:11:25 +00:00
Matthias Fuchs
42ec223f94 qmlglsrc: Fix deadlock when stopping
This fix makes sure that streaming thread stops waiting when the
qmlglsrc element transitions from playing to paused.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2115>
2022-04-06 10:54:51 +00:00
Matthias Fuchs
af71adf315 qmlglsrc: Fix missing depth & stencil buffer
Qt Quick primitives which have some kind of alpha blending
(transparency, rounded corners) are z-sorted by Qt and rendered in the
correct order. For opaque primitives Qt relies on the OpenGL depth
buffer to correctly determine the visibility of stacked elements.

This change enables the depth buffer to make sure that opaque primitives
are correctly z-stacked.

https://doc.qt.io/qt-6/qtquick-visualcanvas-scenegraph-renderer.html#opaque-primitives

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2114>
2022-04-06 09:18:16 +00:00
Sebastian Dröge
0813efc821 rtpstats: Remove non-existing twcc field docs from RTPPacketInfo and add missing field docs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2121>
2022-04-06 10:15:13 +03:00
Sebastian Dröge
46d7763879 rtpsession: Remove unused twcc fields from the struct
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2121>
2022-04-06 10:15:13 +03:00
Xavier Claessens
a40634eebe Use gmodule-no-export-2.0
We don't need `-Wl,--export-dynamic`, that's used only for executables
that needs to export an API to be used by plugins they load.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Xavier Claessens
b004464ac6 Remove glib and gobject dependencies everywhere
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.

While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Thibault Saunier
b358897a3b navigation: Rename parse_state to parse_modifier_state
`parse_state` sounds a bit weird and `parse_modifier_state` is clearer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2087>
2022-04-01 06:38:43 +00:00
Nirbheek Chauhan
b7086a368f meson: Add some messages when selecting libsoup
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>
2022-03-29 18:30:03 +00:00
Nirbheek Chauhan
54eff61f0f soup: Fix usage of symbols / defines that are gone in libsoup3
I am not sure about the SOUP_MESSAGE_OVERWRITE_CHUNKS change, but it
was definitely already broken when using libsoup-3.0 in a shared
build. souphttpsrc probably needs to be ported from SoupMessage to
SoupServerMessage when using libsoup-3.0.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1111

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>
2022-03-29 18:30:03 +00:00
Nirbheek Chauhan
6c910dc746 soup: Fix pre-processor macros in souploader for libsoup-3.0
Some of the preprocessor conditionals in the loader were very broken
with libsoup-3.0 + --default-library=static

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1111

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>
2022-03-29 18:30:03 +00:00
Matthew Waters
5d76ddb466 osxcoreaudio: fix unused-but-set warning
../sys/osxaudio/gstosxcoreaudio.c:480:18: error: variable 'interleaved' set but not used [-Werror,-Wunused-but-set-variable]
  gboolean sign, interleaved;
                 ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Sebastian Dröge
a4ea62ef5b video-format: Move NV12_8L128 into the correct position in GST_VIDEO_FORMATS_ALL
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2045>
2022-03-28 10:39:24 +03:00
Matthew Waters
8cdbfec5ed deinterlace: silence unused-but-set werror from imported code
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2042>
2022-03-28 03:00:58 +00:00
Matthew Waters
aa6c674dd8 osxvideosink: fix unused-but-set-variable warning
../sys/osxvideo/osxvideosink.m:859:11: error: variable 'data' set but not used [-Werror,-Wunused-but-set-variable]
  guint8 *data, *readp, *writep;
          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2040>
2022-03-28 09:50:38 +11:00
Thibault Saunier
2db3ddaa9d navigationtest: Add some support for modifiers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2010>
2022-03-25 15:16:03 +00:00
Thibault Saunier
25819c41fb navigation: Add support for key Modifiers in all relevant events
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2010>
2022-03-25 15:16:03 +00:00
Matthew Waters
c1a3f958e7 rtpptdemux: fix leak of caps when ignoring a pt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2025>
2022-03-25 05:44:36 +00:00
Vivienne Watermeier
ea2f686487 qt: Add touch event support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
2022-03-23 13:14:52 +00:00
Vivienne Watermeier
59199a0131 gtk: Add touch event support
Add a handler for touch events to gtkbasewidget.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
2022-03-23 13:14:52 +00:00
Vivienne Watermeier
97bc8f193f navigationtest: Display touchscreen events, log all events
Represents touchscreen events as a trail of black squares, one for each
reported position. Additionally, this adds the `display-mouse` and
`display-touch` properties to toggle visibility of mouse/touchscreen
events, since touchscreens often emulate mouse events, as well as
logging for all received navigation events.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
2022-03-23 13:14:52 +00:00
Vivienne Watermeier
6c2f6c3bd4 all: Use new navigation interface and API
Use and implement the new navigation interface in all relevant sink elements,
and use API functions everywhere instead of directy accessing the event structure.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
2022-03-23 13:14:52 +00:00
Stéphane Cerveau
1170ab3c29 wavparse: handle query in any parse state
In order to create the stream_id, we need to
pass the query to the default query handler.

If the parse state is different from GST_WAVPARSE_DATA
the query should be passed to the default query
handler.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1987>
2022-03-22 16:25:35 +00:00
Jan Alexander Steffens (heftig)
074f7c2e4e flvmux: Clean up aggregate's control flow
This unifies exits to go through a single out label. It mostly
simplifies how EOS is handled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1035>
2022-03-22 15:28:57 +00:00
Nicolas Dufresne
ebf63e1b91 doc: Update cache after NV12_8L128 addition
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1379>
2022-03-22 00:41:39 +00:00
Ming Qian
2861bd9456 v4l2: Add NV12_8L128 and NV12_10BE_8L128
These formats are used by i.MX 8QXP/8QM VPU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1379>
2022-03-22 00:41:39 +00:00
Matthew Waters
206021e4d4 rtpmanager/rtx: implement initial support for reading/writing rid extensions
Two RTP Header extensions are very relevant for rtprtxsend/receive.
1. "urn:ietf:params:rtp-hdrext:sdes:rtp-stream-id": will always be removed
2. "urn:ietf:params:rtp-hdrext:sdes:repaired-rtp-stream-id": will be written
    instead of the "rtp-stream-id" header extension.

Currently it's only a simple replacement of one header extension for
another however a future change would only add the relevant extension
based on some heuristics (like, video frames only on one of the rtp key
frame buffers, or only until the rtx ssrc has been validated by the peer)
in order to reduce the required bandwidth.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
2022-03-21 03:18:18 +00:00
Matthew Waters
33be3e5936 test: add tests for sdes-based RTP header extensions
mid, stream id and repaired stream id.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
2022-03-21 03:18:18 +00:00
Matthew Waters
1e55e2d654 rtpmanager: add support for RFC8852 (rid) RTP header extensions
Both for regular RID and for adding on a repaired (RTX) etc stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
2022-03-21 03:18:18 +00:00
Matthew Waters
ecd9cce3b1 rtpmanager: add support for writing RFC8843 (BUNDLE mid) RTP header extension
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
2022-03-21 03:18:18 +00:00
Sebastian Dröge
3de245ed17 videocrop: Add support for v210
Like UYVY and similar formats this is rounding down to the start of the
previous macro-pixel to not mix up the different components.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1988>
2022-03-19 01:25:07 +00:00
Sebastian Dröge
49ec82b209 videocrop: Use GST_ROUND_DOWN_2 instead of re-defining a local version
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1988>
2022-03-19 01:25:07 +00:00
Sebastian Dröge
cd86181d54 videocrop: Rename PACKED_COMPLEX to PACKED_YVYU
It's not handling any kind of complex packed format, only formats that
are like YVYU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1988>
2022-03-19 01:25:07 +00:00
Nirbheek Chauhan
1cb127f16b meson: Bump all meson requirements to 0.60
Lots of new warnings ever since
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1934

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1977>
2022-03-18 22:49:16 +00:00
Sangchul Lee
7691c6776a rtpjitterbuffer: Fix invalid memory access in rtp_jitter_buffer_pop()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1973>
2022-03-17 12:46:14 +00:00
Hou Qi
b962126b06 v4l2videodec: set frame duration according to framerate
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1953>
2022-03-16 14:15:04 +00:00
Tim-Philipp Müller
7895bf38ad rtspsrc: proxy new "add-reference-timestamp-meta" property from rtpjitterbuffer
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.

This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
2022-03-16 09:52:58 +00:00
Tim-Philipp Müller
c29d741c0e rtpbin: proxy new "add-reference-timestamp-meta" property from rtpjitterbuffer
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.

This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
2022-03-16 09:52:58 +00:00
Tim-Philipp Müller
c88bfc0b3e rtpjitterbuffer: add "add-reference-timestamp-meta" property
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.

This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
2022-03-16 09:52:58 +00:00
Hou Qi
738dbf1cb7 v4l2videodec: safely retrun from video_dec_loop with stream unlock
This is to avoid decoder hang when doing trick play between
different resolutions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1960>
2022-03-16 02:13:00 +00:00
Sebastian Dröge
5ca39060f4 rtpjitterbuffer: Improve accuracy of RFC7273 clock time calculations
Previously the result of the calculations included inaccuracies caused
by the NTP clock estimation, which caused the timestamps to jitter
+/- 1/clockrate.

By reorganizing the calculations it is possible to get rid of this
inaccuracy and calculate deterministic and exact packet timestamps based
on the actual NTP clock as long as the estimation is not off by more
than 2**31 clockrate units.

The only remaining inaccuracy that is introduced now is caused by the
conversion from the NTP clock to the pipeline clock.

Also split up debug output, demote many messages to the trace debug
level and output more intermediate results.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1955>
2022-03-15 23:33:37 +00:00
Nirbheek Chauhan
8c2ef0f025 twcc: Add some logging to debug TWCC feedback
This should allow people to debug when TWCC feedback is not enabled
because they haven't set the extmap in the caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1952>
2022-03-15 22:32:07 +00:00
Nirbheek Chauhan
a6bb63dcd7 twcc: Note that packet-loss-pct can count reordering as loss
This is difficult to encounter in ordinary networks, but is
encountered when using tc-netem to add random delays to packets, and
also when your UDP stream is bonded over multiple links with varying
characteristics.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1952>
2022-03-15 22:32:07 +00:00
Havard Graff
e5bd9839c4 rtprtxsend: don't require clock-rate in caps
For multiplexing, the rtpstreams you are multiplexing might not use
the same clock-rate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1881>
2022-03-15 19:05:00 +00:00
Havard Graff
4d31641302 rtprtxsend: don't start the task unless we are doing rtx
The rtxsend element can do pass-through when not enabled (no pt-map set)
and in those cases there is no point in starting an additional task
that does absolutely nothing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1880>
2022-03-15 12:03:27 +00:00
Havard Graff
6f57199958 rtprtxreceive: add ssrc-map property
Mirroring the rtxsend, this allows the application to "pre-map" the
retransmission-ssrcs to the "real" ssrc, if this information is known.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1878>
2022-03-14 09:14:10 +00:00
Carlos Rafael Giani
671c89c392 mpg123: Add gapless playback support
Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1028>
2022-03-14 10:32:15 +02:00
Carlos Rafael Giani
0431a0845c mpegaudioparse: Support gapless playback
Gapless playback is handled by adjusting buffer timestamps & durations
and by adding GstAudioClippingMeta.

Support for "Frankenstein" streams (= poorly stitched together streams)
is also added, so that gapless playback support doesn't prevent those
from being properly played.

Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1028>
2022-03-14 10:32:15 +02:00
Jan Alexander Steffens (heftig)
2db283499e deinterlace: scalerbob: Reduce latency to 0
We only need the current field, just like `linear`.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1926>
2022-03-12 22:48:39 +00:00
Vivia Nikolaidou
8c648384f2 yadif: Fix CHECK macro for YUY2 format
Used to make comb artifacts for videotestsrc pattern=ball for YUY2
format only (not AYUV).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1938>
2022-03-12 17:18:47 +00:00
Damian Hobson-Garcia
bd2a55dcb3 doc: New cropping parameters added to v4l2src
v4l2src add several new parameters to control cropping of
the captured video stream.  Update the doc cache to reflect
this.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
2022-03-11 15:02:08 +00:00
Damian Hobson-Garcia
1fc8347c1e examples: v4l2: Add v4l2src crop example
Add a simple utility to illustrate how to set input cropping on v4l2src.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
2022-03-11 15:02:08 +00:00
Damian Hobson-Garcia
70086fda22 v4l2src: Add support for cropping at capture source input
Add properties to control input cropping in the V4L2 device.
The input cropping is applied before composing the result to the
capture buffer.  By default the capture size will be set to the same
size as the crop region, but it can be scaled to a different output
frame size if supported by the V4L2 device.
If scaling is not supported, the cropped image will
be composed as is into the top-left corner of the capture buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
2022-03-11 15:02:08 +00:00
Damian Hobson-Garcia
ceff3e8ff7 v4l2object: Add function to get crop regions from device
Get the current crop bounding region from the V4L2 device so
that it can be provided to applications and used to validate
crop settings. Also make the default crop region available so
that it can be used to reset the crop when appropriate.

Uses the selection API when available with fallback to the crop
API for older kernels.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
2022-03-11 15:02:08 +00:00
Damian Hobson-Garcia
25f240993c v4l2object: rename crop function to reflect its usage
The gst_v4l2_object_set_crop() is used for removing buffer
alignment padding. Give it a name that better reflects
that usage.  This helps to distinguish from cropping of the
input image (e.g. cropping at the image sensor on a captre
device), which can be  unrelated to the memory buffer padding,
especially if scaling is involved.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
2022-03-11 15:02:08 +00:00
Sangchul Lee
67df5815a9 rtpvp8depay: Fix crash when making 'GstRTPPacketLost' custom event
This patch fixes a seg.fault in gst_structure_new() with warnings as below.

GLib-GObject-WARNING **:
 ../gobject/gtype.c:4330: type id '0' is invalid
GLib-GObject-WARNING **:
 can't peek value table for type '<invalid>' which is not currently referenced

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1918>
2022-03-10 19:37:49 +00:00
Tomasz Andrzejak
e74435008f rtpbin: allow FEC elements with Always pads
This patch enable picking up FEC decoder or enocder that have
static repair packets pad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1860>
2022-03-10 08:33:27 +00:00
Nirbheek Chauhan
40efef1fac soup: Load the runtime library, not the development library
libsoup-2.4.so / libsoup-3.0.so are symlinks installed by development
packages, they are not available at runtime.

Also eliminate G_MODULE_SUFFIX since it's not useful for us, and is
actually incorrect on macOS anyway.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1071

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1899>
2022-03-10 07:44:54 +00:00
Edward Hervey
568b918971 qtdemux: Propagate stick events downstream when creating pads
If upstream provided a stream collection event before any pads were created,
make sure it's propagated downstream when pads are created.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1891>
2022-03-09 16:09:31 +00:00
Havard Graff
a2c25ccd09 rtprtxsend: if no rtx is present, don't expose a rtx-ssrc in caps
The point here is that rtpsession will create a new rtpsource when
the field "rtx-ssrc" is present, and when not doing rtx, that means
a random ssrc will create a new rtpsource that will be included in RTCP
messages for the current session.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1882>
2022-03-09 15:30:37 +00:00
Havard Graff
2a8fa45ba8 rtprtxsend: don't process or warn if no map is set
This makes it more gentle when doing "pass-through"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1879>
2022-03-09 12:01:22 +05:30
Mikhail Fludkov
815d279f2e rtprtxreceive: fix crash when RTX payload has zero length
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1875>
2022-03-08 09:07:41 +00:00
Havard Graff
86c7231dae rtprtxreceive: allow passthrough and non-rtp buffers
To avoid mapping rtp buffers when RTX is not in use, and to not
do a full error on receiving a non-rtp buffer, since you have no control
of what a rouge sender might send you.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1874>
2022-03-07 23:43:49 +00:00
Havard Graff
a475c93346 rtprtx: don't access type-system per buffer
When doing only a single stream of audio/video this hardly matters,
but when doing many at the same time, the fact that you have to get
a hold of the glib global type-system lock every time you process a buffer,
means that there is a limit to how many streams you can process in
parallel.

Luckily the fix is very simple, by doing a cast rather than a full
type-check.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1873>
2022-03-07 22:01:03 +00:00
Havard Graff
2a26daee46 rtprtx: signed/unsigned and style fixes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1872>
2022-03-07 21:16:45 +00:00
Hou Qi
fa6f34d595 v4l2bufferpool: Fix race condition between qbuf and pool streamoff
There is a chance that pool->buffers[index] sets BUFFER_STATE_QUEUED, but
it has not been queued yet which makes pool->buffers[index] still NULL.
At this time, if pool_streamff release all buffers with BUFFER_STATE_QUEUED
state regardless of whether the buffer is NULL or not, it will cause segfault.

To fix this, also check buffer when streamoff release buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1842>
2022-03-07 15:14:15 +00:00
Hou Qi
b11084f729 flvmux: Add protection when unref GstFlvMuxPad
This is to avoid gst_object_unref: assertion 'object != NULL' failed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1843>
2022-03-07 13:03:16 +00:00
Nicolas Dufresne
0b7e8efe61 doc: AV1 demuxers now expose their alignment
Update the chache accordingly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Nicolas Dufresne
0f15580853 matroska: Fix AV1 alignment to TU
Matroska stores AV1 in temporal unit, so that all OBU sharing the same
timestamp are put together. This was previously just assumed, which isn't
safe now that we have more alignments.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Nicolas Dufresne
f6c070fbff isomp4: Fix AV1 default alignment
ISOMP4 store TU (temporal units) worth of AV1. Expose this in the
caps to reduce overhead in the parser, and in the muxer to avoid
storing frames split in the wrong way.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Tristan Matthews
9d0d001d19 matroskamux: allow width+height caps changes for VP8/9
For VP8 and VP9, width+height changes are signalled inband.

Refs https://github.com/Kurento/bugtracker/issues/535 and
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/1047/diffs?commit

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1657>
2022-03-04 14:17:20 -05:00
Tristan Matthews
c6ba57eb8e matroskamux: allow width + height changes for avc3|hev1
For avc3 and hev1, the intent was to allow more flexibility for caps changes
(see https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/1047/diffs?commit_id=9bd8d608d5bae27ec5ff09e733f76ca32b17420c)
however width and resolution were previously omitted.

avc3 and hev1 specifically support changing stream-parameters on the fly, whereas avc1/hvc1 disallow in-band SPS.

This commit allows for changes to width and height for these which is in line with matroskamux's behaviour prior to 1.14.0.

Practically speaking, one use case where this is commonly seen is when capturing a WebRTC stream, as the browser will adapt the resolution live.

Suggested-by: Mathieu Duponchelle "<mathieu@centricular.com>"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1657>
2022-03-04 14:17:20 -05:00
Jan Alexander Steffens (heftig)
ce503d0645 deinterlace: Prevent race between _set_method and latency query
It's possible that the method is being manipulated while downstream
queries our latency, leading to crashes.

Prevent that from happening.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1854>
2022-03-04 16:14:46 +00:00
Nirbheek Chauhan
f42f65a993 soup: Fix static build with MSVC
../ext/soup/gstsouploader.c(818): error C4098: '_soup_session_send_async': 'void' function returning a value

It's technically a false warning, but that's how MSVC works, so fix
it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1805>
2022-03-03 23:07:35 +05:30
Nirbheek Chauhan
7f04ee970b soup: Fix pkgconfig generation and documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1805>
2022-03-03 16:59:16 +00:00
Nirbheek Chauhan
2e3a575533 soup: Fix static build when default_library=both
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1007

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1805>
2022-03-03 16:59:16 +00:00
Nirbheek Chauhan
845402e6db soup: Don't error out in static build unless option is enabled
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1805>
2022-03-03 16:59:16 +00:00
Philippe Normand
c28b9b6245 soup: Lookup libsoup dylib files on Apple platforms
Fixes #1007

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1805>
2022-03-03 16:59:16 +00:00
Damian Hobson-Garcia
2f410f26bf v4l2src: Reset the compose window to the default after setting format
When the size of V4L2 capture or output is changes with VIDIOC_S_FMT,
the device is only required to update the compisition window to fit
inside the new frame size.  This can result in captured data only being
updated on a portion of the frame after a resize.

Update the composition window to the default value determined by the
V4L2 device driver whenever the format is changed to make sure that
all image data is composed to its full size.

Fixes #765

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1806>
2022-03-03 13:28:31 +00:00
Sebastian Dröge
9f798776e5 matroska-mux: Handle pixel-aspect-ratio caps field correctly when checking caps equality
Not having this field is equivalent with it being 1/1 so consider
it like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
2022-03-02 10:27:47 +00:00
Sebastian Dröge
1b851ae23f matroska-mux: Handle multiview-mode/flags caps fields correctly when checking caps equality
Not having these fields is equivalent with them being mono/0 so consider
them like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
2022-03-02 10:27:47 +00:00
Jan Schmidt
cebf769725 matroska-mux: If a stream has a TITLE tag, use it for the name.
If a title tag is pushed to a pad, store it as the Track name.
This means that players will use it as the human readable
description of the track, instead of something generic like 'Video'
or 'Subtitle'

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
2022-03-01 13:17:40 +00:00
Jan Schmidt
7efdc9c7f5 matroskademux: Don't parse Tracks element twice
If the tracks element was parsed from the SeekEntry, don't
parse it a second time and recreate tracks, as this
loses any tags that were read using the seek table.

If a genuinely new Tracks element is found, do read that
as it is needed for MSE support.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
2022-03-01 13:17:40 +00:00
Sebastian Fricke
c999d2c3a9 Maintain build instructions at a single location
Do not maintain similar build instructions within each gst-plugins-*
subproject and the subproject/gstreamer subproject. Use the build
instructions from the mono-repository and link to them via hyperlink.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
2022-03-01 11:33:10 +00:00
Vivia Nikolaidou
b699feefee yadif.asm: Fix improper usage of LOAD macro
LOAD macro relies in m7 being zero for interleaving purposes. Using LOAD
on the m7 register makes it interleave with its new content instead of
with 0.

The effect of this bug was bobbing on some static lines that appeared
over fast-moving content.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1816>
2022-03-01 07:22:10 +00:00
Vivia Nikolaidou
d499342f0d yadif.asm: Typo fixes in comments
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1816>
2022-03-01 07:22:10 +00:00
Vivia Nikolaidou
087ca88213 yadif: Fix bug in C implementation of CHECK
It was different compared to the corresponding part in both ffmpeg and
the asm implementation. Fixing this makes videotestsrc pattern=spokes
not jump at all when not using the asm optimisations.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1816>
2022-03-01 07:22:10 +00:00
Ming Qian
24eb35f113 v4l2videodec : enable resolution change
The dynamic resolution changes when
the sequence starts when the decoder detects a coded frame with one or
more of the following parameters different from those previously
established (and reflected by corresponding queries):
1.coded resolution (OUTPUT width and height),
2.visible resolution (selection rectangles),
3.the minimum number of buffers needed for decoding,
4.bit-depth of the bitstream has been changed.

Although gstreamer parser has parsed the stream resolution.
but there are some case that we need to handle resolution change event.
1. bit-depth is different from the negotiated format.
2. the capture buffer count can meet the demand
3. there are some hardware limitations that the decoded resolution may
be larger than the display size. For example, the stream size is
1920x1080, but some vpu may decode it to 1920x1088.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
2022-03-01 00:00:50 +00:00
Ming Qian
fe56af607b v4l2videodec : refactor the setup process of capture
v4l2videodec do some refactoring so that it can support
dynamic resolution change event.

1.wrap the setup process of capture as a function,
as decoder need setup the capture again when
dynamic resolution change event is received.

2.move the function "remove_padding"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
2022-03-01 00:00:50 +00:00
Sebastian Dröge
b0afaffc5d rtp: In payloaders map the RTP marker flag to the corresponding buffer flag
This allows downstream of a payloader to know the RTP header's marker
flag without first having to map the buffer and parse the RTP header.

Especially inside RTP header extension implementations this can be
useful to decide which packet corresponds to e.g. the last packet of a
video frame.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1776>
2022-02-28 10:13:11 +00:00
Joseph Donofry
630dbea94c osxaudiosrc: Support a device as both input and output
osxaudiodeviceprovider now probes devices more than once to determine
if the device can function as both an input AND and output device.

Previously, if the device provider detected that a device had any output
capabilities, it was treated solely as an Audio/Sink.  This causes issues
that have both input and output capabilities (for example, USB interfaces
for professional audio have both input and output channels).  Such devices
are now listed as both an Audio/Sink as well as an Audio/Source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1385>
2022-02-28 06:51:21 +00:00
Sanchayan Maity
cc3419daf6 rtp: ldac: Set frame count information in payload
The RTP payload seems to be required as it carries the frame count
information. Also, gst_rtp_base_payload_allocate_output_buffer had
the second argument incorrect.

Strangely some devices like Shanling MP4 and Sony XM3 would still
work without this while some like the Sony XM4 do not.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1797>
2022-02-26 21:09:57 +05:30
Xavier Claessens
3d8372cc50 devenv: Add some missing GStreamer specific env variables
This should make "meson devenv" closer to what "gst-env.py" sets.

- GST_VALIDATE_SCENARIOS_PATH
- GST_VALIDATE_APPS_DIR
- GST_OMX_CONFIG_DIR
- GST_ENCODING_TARGET_PATH
- GST_PRESET_PATH
- GST_PLUGIN_SCANNER
- GST_PTP_HELPER
- _GI_OVERRIDES_PATH

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1768>
2022-02-25 20:35:26 +00:00
Jan Alexander Steffens (heftig)
d6ec88c775 deinterlace: greedyh: Stop adding 2 to cur_field_idx
Just a simplification.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1790>
2022-02-25 12:06:56 +00:00
Jan Alexander Steffens (heftig)
dc1ae0aaa0 deinterlace: greedyh: Use _plane in _packed, fix planar formats
This greatly reduces code duplication. It also exposed the cause for
planar formats not being properly deinterlaced:

The planar path was missing the initial offset adjustment that the
packed path did to `L2` and `L2P` in the case of an even field, which
caused it to select the wrong weave lines every other field.

Add those offsets in `_plane`.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1047
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1790>
2022-02-25 12:06:55 +00:00
Jan Alexander Steffens (heftig)
625cbcf70a deinterlace: greedyh: Rename _planar_plane to _plane
As well as `i` to `plane`.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1790>
2022-02-25 12:06:55 +00:00
Jan Alexander Steffens (heftig)
7e16955e4d deinterlace: greedyh: Move code from _planar into _planar_plane
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1790>
2022-02-25 12:06:55 +00:00
Jan Alexander Steffens (heftig)
19ca706fe8 deinterlace: greedyh: Move _planar_plane upwards
In preparation of refactoring. No functional change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1790>
2022-02-25 12:06:55 +00:00
Guillaume Desmottes
8bbdd9addb rtpsource: fix rtp_source_get_nack_deadlines doc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1775>
2022-02-22 09:40:35 +00:00
Matthew Waters
b0f72ed788 ulpfecenc: slightly safer dispose impl
Technically dispose can be called more than once (even if gstelement is
not actually set up to do that) so need to protect against that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1761>
2022-02-21 09:43:33 +00:00
Matthew Waters
629b427a13 ulpfecenc: fix unmatched free() call
One must always match a g_slice_new with a g_slice_free and a g_new with
a g_free.  This was not the case for the internal ctx struct.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1761>
2022-02-21 09:43:33 +00:00
Matthew Waters
acc9024039 rtpulpfecenc: add some debug logging
Like, what configuration we are using or whether a fec packet is
generated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1761>
2022-02-21 09:43:33 +00:00
Nirbheek Chauhan
4e22ef5bd2 matroska-demux: Emit a warning when no codec data found
It is bad if an mkv file does not have codec data for the ProRes
variant, so we should emit a warning. ffmpeg does the same thing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1739>
2022-02-21 08:49:28 +00:00
Nicolas Dufresne
3d2eb5a04c doc: Add NV12_16L32S into the cache
Autogenerated by CI

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:56 +00:00
Nicolas Dufresne
e2b2ff26c9 v4l2transform: Handle caps changes
As this element is single threaded, we only need to stop the objects to
allow changing the format again. Fixes assertion notably on shutdown and
on some other situation where the format may be set twice without
actually activating the element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Nicolas Dufresne
d394b8b4bd v4l2object: Avoid crash on early failure
This happens while an external error lead to an early shutdown.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Nicolas Dufresne
ec9585d148 video4linux2: Add MM21 support
This enables mtk-vcodec and MDP driver from mainline Linux kernel.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Nicolas Dufresne
bab9041c4b Port plugins to gst_video_format_info_extrapolate_stride()
This reduces code duplication and simplify addition of new
pixel formats into related plugins.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Rouven Czerwinski
748c5f3579 gstv4l2tuner: return NULL if no norm set
If the video4linux device supports norms but has no norm set, norm is
returned as an uninitialized variable after the ioctl call, leading to
gst_v4l2_tuner_get_norm_by_std_id() returning a random norm from the
supported norms. Catch this case and instead return NULL to indicate
that no norm is setup.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1625>
2022-02-20 21:38:40 +00:00
Tim Mooney
54a1f60077 v4l2: include <sys/ioccom.h> on Illumos
Needed for _IOR/_IORW

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1524>
2022-02-18 21:34:49 +00:00
Sebastian Wick
e61e069189 matroska: default prores fourcc apcn
If there is no codec private data for prores it should default to Apple
ProRes 422 Standard Definition (apcn). Can be tested with
strobe_scientist.mkv from
https://developers.google.com/media/vp9/hdr-encoding

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1734>
2022-02-18 08:38:31 +00:00
Seungha Yang
53ed876002 qtdemux: Do not send unnecessary GAP events
Each stream may have its own segment timeline
(i.g., different segment.start or segment.base)
depending on edit-list and composition-to-decode atom.

Make sure whether time position of a stream has been actually
far behind than that of current target stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1352>
2022-02-17 19:39:53 +00:00
Seungha Yang
e1f0687b09 meson: Do hard build error for some MSVC warnings
Handle various MSVC warnings as errors for development version.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1006>
2022-02-16 17:03:29 +00:00
Sebastian Dröge
8bda2ef474 qtmux: Don't post an error message if pushing a sample failed with FLUSHING
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1711>
2022-02-15 13:43:41 +02:00
Heiko Becker
d03971dac7 meson: Don't build lame plugin with -Dlame=disabled
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1686>
2022-02-15 04:05:08 +05:30
Marek Vasut
c9e108378a jpegdec: Pull row_stride from GST_VIDEO_FRAME_PLANE_STRIDE()
The libjpeg-turbo internal state might not be correctly initialized for
the first frame in a stream, pull the frame stride from gstreamer frame
metadata instead, which is correct even for the first frame, and which
makes this code consistent with the surrounding lines.

Fixes: e6d83d8f96 ("jpegdec: Support libjpeg-turbo colorspace conversion")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
2022-02-13 14:46:31 +01:00
Marek Vasut
d277002186 jpegdec: Call gst_jpeg_turbo_parse_ext_fmt_convert() before jpeg_start_decompress()
It is imperative that the libjpeg-turbo state is properly initialized
before jpeg_start_decompress() is called. Make sure cinfo.out_color_space
and cinfo.raw_data_out are set to their final values matching their peer
caps before calling jpeg_start_decompress().

Fixes: e6d83d8f96 ("jpegdec: Support libjpeg-turbo colorspace conversion")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
2022-02-13 14:46:31 +01:00
Marek Vasut
4ee4a9bff9 jpegdec: Factor out gst_jpeg_turbo_parse_ext_fmt_convert()
Pull out peer caps checking code into gst_jpeg_turbo_parse_ext_fmt_convert().
This code is used by libjpeg-turbo extras to determine whether peer is capable
of handling buffers into which libjpeg-turbo can directly decode data. This
kind of check must be performed before jpeg_start_decompress() is called in
gst_jpeg_dec_prepare_decode() as well as in gst_jpeg_dec_negotiate(), hence
the common code.

This commit does modify the code a little to make it easier to call from both
call sites without much duplication, hence the extra `if (*clrspc)` test.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
2022-02-13 14:46:31 +01:00
Marek Vasut
9a029f016d Revert "jpegdec: only allow conversions from RGB"
This reverts commit 2aa2477208.
The commit is completely wrong, libjpeg-turbo is perfectly capable
of decoding I420 (YUV) to RGB. The test case provided alongside the
aforementioned commit passes without this revert because it decodes
image of JCS_YCrCb color space, so the new `if (clrspc == JCS_RGB)`
condition is false on that image, and the libjpeg-turbo decoding
does not get used. The real bug is hidden by that commit.

The real problem is in the call order of gst_jpeg_dec_prepare_decode()
and gst_jpeg_dec_negotiate(). The gst_jpeg_dec_prepare_decode() calls
jpeg_start_decompress() which sets up internal state of the libjpeg,
however, neither cinfo.out_color_space nor cinfo.raw_data_out are
set correctly yet. Those two are set up in gst_jpeg_dec_negotiate()
which is called a bit later. Therefore, the real fix is the set up
cinfo.out_color_space and cinfo.raw_data_out before calling
jpeg_start_decompress(). This is however a separate patch.

Fixes: 2aa2477208 ("jpegdec: only allow conversions from RGB")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
2022-02-13 14:46:31 +01:00
Bastien Nocera
32633a9a14 gtk: Fix rotation not being applied when paused
The video wouldn't be redrawn immediately when a rotation was applied
but the pipeline was paused, as no new buffers were scheduled to be
displayed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1618>
2022-02-10 23:33:02 +00:00
Bastien Nocera
ec77a1aac8 gtk: Add a way to queue redrawing the base GTK widget
This will be used to request a redraw of the GTK widget should the
display be changed using properties not directly handled by the base GTK
widget, but by one of its descendants.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1618>
2022-02-10 23:33:02 +00:00
Robert Rosengren
265878c4ba rtpbin: Safer ts-offset-smoothing-factor calculation
Protect the ts-offset-smoothing-factor calculation from overflow. Output
warning and fallback to ts-offset if it is detected.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1409>
2022-02-08 11:11:35 +00:00
Robert Rosengren
31dd9226ce rtpbin: add ts-offset-smoothing-factor property
Add property to set the TS offset smoothing factor and set default value
to not use it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1409>
2022-02-08 11:11:35 +00:00
Danny Smith
bc964141c8 rtpbin: applied smoothing to jittery sender time-stamps
Applying a moving average filter to the timestamp offsets
for smoothing jittery and preventing aggressive skew handling.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1409>
2022-02-08 11:11:34 +00:00