We only want to do a hard reset of the observations if we're working
with TIME segments in push mode. For BYTE segment we want to keep
the observations (in order to do seeks in push-mode).
When in push mode, we want to discard all previous observations from the
mpegtspacketizer when we get a DISCONT buffer.
This avoids trying to calculate bogus timestamps (estimating them using old
PCR observations).
We only do a hard reset in push-mode. In pull-mode we still need the observations
(in order to seek properly)
This is not public API, use g_assert() instead of
g_return_if_fail(), so that it's compiled out in
releases. It's only called from our code, with &foo.
Introduced by c4c9fe60b pcapparse: Take buffer directly from the adapter
Using gst_adapter_take_buffer_fast() can lead to buffers that are
made up of multiple memories with the first memory smaller than the
RTP header size, which violates assumptions GstRtpBaseDepayloader
makes, namely that the complete RTP header will be in the first
memory. This leads to such packets being dropped when feeding
them from pcapparse to RTP depayloaders. Use take_buffer() so
we get buffers with a single memory.
Introduced by c4c9fe60b pcapparse: Take buffer directly from the adapter
Flush any trailing bytes after the payload from the adapter as well,
otherwise we'll read a bogus packet size from the adapter next and
then everything goes downhill from there.
https://bugzilla.gnome.org/show_bug.cgi?id=751879
Can be used to fix misbehaving sinks. It will pass through all buffers
until it encounters GST_FLOW_ERROR or GST_FLOW_NOT_NEGOTIATED (configurable).
At that point it will unref the buffers and return GST_FLOW_NOT_LINKED
(configurable) - until the next READY_TO_PAUSED or FLUSH_STOP.
https://bugzilla.gnome.org/show_bug.cgi?id=750098
Move the pixel-aspect-ratio calculations higher up in caps
determination, so the results are available for a call to
gst_video_multiview_guess_half_aspect() when stereoscopic video
is detected.
Use QOS messages to update rendered and dropped frame stats. This is
the only accurate method. The old method didn't take max-lateness and
latency into account.
After few iteration, this variable became the same as dts. It's not
the min as the name says, but the dts of the current buffer. Simply
remove and place with dts. Also move the debug trace to actually
print the signed version of the running-time dts.
after e000a6f0a4, there is build error in bad plugins
this happens because, GST_CLOCK_STIME_IS_VALID () is being checked for pad_data
but it expects a GstClockTime parameter. Changing the check to 'dts'
https://bugzilla.gnome.org/show_bug.cgi?id=750961
The segment should start at first PTS, and the vairable name lower_pts
state so correctly. Though we where using the first DTS instead. This
could lead to small desynchronization of video stream.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Use the saved DTS, make it signed and pass that to the stream muxer. This
preserves the running time sign. All usage of -1 as invalid TS are now
replaced with G_MININT64. Negative values will be seen as wrap-around
point, but the delta between PTS and DTS will remain correct. Demuxers
don't care about absolute values, they only cares about deltas.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
There was code to detect backward dts, but the marker min_dts
was never set. Setting it enable this feature that prevents
potential integer overflow when generating TS.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Wait until at least one keyframe has been parsed before
deciding to switch to passthrough mode, in case the
stream contains SEI messages that supplement the output
caps - for example by providing stereoscopic information
We were off by one byte in the matching
It should be (using 24 bit matching):
* startcode : 0000 0000 0000 0000 1000 00xx
* mask (bin) : 1111 1111 1111 1111 1111 1100
* mask (hex) : f f f f f c
* match : 0 0 0 0 8 0
https://bugzilla.gnome.org/show_bug.cgi?id=750685
In case of the videomark being partially or fully outside,
an error was bein thrown saying, mark width is more than video width.
And when the width, offset properties are set to maximum it resulted in crash.
Instead of throwing error, added logic to detect the mark
in case of partial visibility or dont show the mark when it is outside.
https://bugzilla.gnome.org/show_bug.cgi?id=743908
In case of the videomark being partially or fully outside, an error was being
thrown saying the mark width is more than video width. And when the width,
offset properties are set to maximum it resulted in crash. Instead of throwing
an error, add logic to detect the mark in case of partial visibility or don't
show the mark when it is outside.
https://bugzilla.gnome.org/show_bug.cgi?id=743908
Chinese broadcaster encapsulate AVS video codec into MPEG2-TS. They
use the stream_id 0x42 to identify AVS video streams. It should be noted
that this id is currently within the ISO reserved range, hence it's
utilisation is unofficial.
https://bugzilla.gnome.org/show_bug.cgi?id=727731
Value of res is reset to FALSE in each iteration of the while loop. We want to
conserve TRUE if any pad event succeeded until we arrive to done.
Also, buf is set to the value of *outbuf twice. Removing the first assignment
since the second one is outside of a conditional.
Like SPS/PPS they do contain information which will be needed to
decode the following data (as per definition of the flag)
Also ensures that the series of SPS/PPS/SEI NALU before a keyframe
can be considered as one contiguous header
In the same way we do it for the DELTA_UNIT flag
This allows downstream elements to know whether a given mpeg-ts
packet contains a corresponding HEADER elementary unit
Timestamps should start at the segment start, rather than 0, so
we need to not subtract the first timestamp. This makes the sink
correctly account for running time when switching PMTs where a
stream starts not quite at zero, causing timing offsets that can
become noticeable and causing dropped frames after a few times.
A new program object is created to replace an existing one
in the programs hash table, so its refcount needs to match.
With the default of 0 refcount on creation, the next PAT
change will cause that refcount to be both incremented and
decremented (assuming the new PAT references that stream too),
which will cause the program to be destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=748412
In the H263 spec, CPFMT is present only if the use of a custom
picture format is signalled in PLUSEPTYPE and UFEP is "001",
so we need to check params->format and only if the value is
6 (custom source format) the CPFMT should be read, otherwise
it's not present and wrong data will be parsed.
When reading the CPFMT, the width and height were not
calculated correctly (wrong bitmask).
https://bugzilla.gnome.org//show_bug.cgi?id=749253
Rather than one of the input pad video info's.
The test checking this was not constraining the output frame size
to ensure that the out of frame stream was not being displayed.
No need to call gst_remove_silence_reset() in gst_remove_silence_init() because
vad_new() already calls this function. Since there are no more uses of
_silence_reset(), we can remove it altogether.
Don't use the apis in codec-utils to extract the profile and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
It's a waste of resources to map it if it won't be converted
or used at all. Since we moved the frame mapping down, we need
to use the GST_VIDEO_INFO accessor macros now in the code above
that instead of the GST_VIDEO_FRAME accessor macros.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
For each frame, compare the frame boundaries, check if the format contains an
alpha channel, check opacity, and skip the frame if it's going to be completely
overwritten by a higher zorder frame. The check is O(n^2), but that doesn't
matter here because the number of sinkpads is small.
More can be done to avoid needless drawing, but this covers the majority of
cases. See TODOs. Ideally, a reverse painter's algorithm should be used for
optimal drawing, but memcpy during compositing is small compared to the CPU used
for frame conversion on each pad.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
Don't use the apis in codec-utils to extract the profile,tier and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
Free the existing descriptor array, if any, before replacing it.
Fix leaks with the
validate.file.playback.scrub_forward_seeking.test-mpeg2-mp3_mxf scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=748580
If the stream which is about to be removed still has a ref on a tag list we
should drop it.
Fix a leak which was occasionally happening with the
validate.file.playback.change_state_intensive.tron_en_ge_aac_h264_ts scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=748576
Replace videocrop ! videoscale ! capsfilter with the digitalzoom
bin that has the same pipeline internally and already updates
the capsfilter automatically when caps change, removing this code
from wrappercamerabinsrc and making it cleaner.
Avoids one extra uneeded renegotiation if the elements are already
configured to their final property values when the caps event
goes through.
Also avoids hitting bug https://bugzilla.gnome.org/show_bug.cgi?id=748344
It contains videocrop ! videoscale ! capsfilter and implements digital
zooming.
At this moment, it is a private element of the camerabin plugin.
This will remove some code used in wrappercamerabinsrc to make
code clearer and digitalzoom can potentially be used by other
applications in the future, it has nothing camerabin specific.
wrappercamerabinsrc has a videocrop element to be used for
zooming and for cropping when input caps is different when used
with the GstPhotography interface. The zooming part needs
the following elements:
capsfilter ! videocrop ! videoscale ! capsfilter
The capsfilters should always have the same caps to ensure the
zooming is done and preserves dimensions, unless when it is needed
to do more cropping due to input dimensions those caps
need to be modified accordingly to preserve the output dimensions.
This, however, makes it hard to get caps negotiation to work properly
as we need to have different caps in the capsfilters to account for
the extra cropping needed. It could be simple for fixed caps but it
gets tricky with unfixed ones.
To solve this, this patch splits the zooming and dimension reduction
cropping into 2 separate videocrop elements. The first one does
the dimension cropping, which is only needed when the GstPhotography
API is used and the source provides a caps that is different than
what is requested, while the second is dedicated to zoom crop only.
The first part of the pipeline goes from:
src ! videoconvert ! capsfilter ! videocrop ! videoscale ! capsfilter
to
src ! videocrop ! videoconvert ! capsfilter ! videocrop ! videoscale ! capsfilter
It might add an extra overhead in the image capture as the image might need
to be cropped twice but this can be solved by enabling videocrop to use
crop metas so only the later one does the real cropping.
It also makes the code a bit simpler.
Remove tee and output-selector and just link the source
pad to the outputs we want as needed.
The way we need to prioritize caps negotiation and allocation
queries depending on the mode enabled is too custom to be
handled using tee and output-selector.
This provides more flexibility and doesn't get in the way of proper
handling of negotiation and allocation queries.
The detection for missing format/alignment is done way before this
codepath is reached (at which point we have already decided of a
format and alignment).
CID #1232800
When block width property is set to 0, exception occurs.
This happens due to divide by zero errors in calculations.
block width property can never be 0. Hence adjusting the minimum value to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=744188
Such seeks are used to change playback rate and we do not want
to alter the position in that case, so we bypass the flush/seek
logic, and set things up so a new segment is scheduled to be
regenerated.
https://bugzilla.gnome.org/show_bug.cgi?id=735100
This will happen when the PMT changes, replacing streams with
new ones. In that case, we need to accumulate the running time
from the previous chain in the segment base.
https://bugzilla.gnome.org/show_bug.cgi?id=745102
Reset the internal segment before freeing it.
mxf_index_table_segment_parse() allocates data inside the segment
(like segment->delta_entries) which have to be freed using
mxf_index_table_segment_reset().
https://bugzilla.gnome.org/show_bug.cgi?id=746803
Also:
- Don't modify size on early buffer
The size is the size of the buffer, not of remaining part.
- Use the input caps when manipulating the input buffer
Also store in in the sink pad
- Reply to the position query in bytes too
- Put GAP flag on output if all inputs are GAP data
- Only try to clip buffer if the incoming segment is in time or samples
- Use incoming segment with incoming timestamp
Handle non-time segments and NONE timestamps
- Don't reset the position when pushing out new caps
- Make a number of member variables private
- Correctly handle case where no pad has a buffer
If none of the pads have buffers that can be handled, don't claim to be EOS.
- Ensure proper locking
- Only support time segments
https://bugzilla.gnome.org/show_bug.cgi?id=740236
When the timeout is reached, only ignore pads with no buffers, iterate
over the other pads until all buffers have been read. This is important
in the cases where the input buffers are smaller than the output buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=745768
Correctly calculate alpha in a few places by dividing by 255,
not 256.
Fix the argb and bgra blending functions to avoid an off-by-one
error in the calculations, so painting with alpha = 0xff doesn't
ever bleed through from behind
Currently the alignment property just makes sure that we
output things in multiples of align*packet_size bytes, but
with no clear maximum size. When streaming MPEG-TS over
UDP one wants buffers with a maximum packet size of 1316.
The alignment property so far would just output buffers
that are a multiple of 1316 then.
Instead we now make the alignment property output
individual buffers with the alignment size, which
is entirely backwards compatible with the expected
behaviour up until now. For efficiency reason
collect all those buffers in a buffer list and
send that downstream.
Also collect data to push downstream in a buffer
list from the adapter if we don't align things,
which is still more efficient because of the
silly way the muxer currently creates output
packets.
https://bugzilla.gnome.org/show_bug.cgi?id=722129
Actually accumulate the sample counter to check the accumulated error
between actual timestamps and expected ones instead of just resetting
the error back to 0 with every new buffer.
Also don't reset discont_time whenever we don't resync. The whole point of
discont_time is to remember when we first detected a discont until we actually
act on it a bit later if the discont stayed around for discont_wait time.
https://bugzilla.gnome.org/show_bug.cgi?id=746032
This allows us to handle new segment events correctly; either by dropping
buffers or inserting silence; for example if the offset is changed on an srcpad
connected to audiomixer.
If the video source happens to allow max-zoom to be greater than our maximum hard coded
value of 10 then the user cannot set anything greater than our maximum specified in the
param spec. We have to update our param spec to prevent glib from capping the value
https://bugzilla.gnome.org/show_bug.cgi?id=745740
This reverts commit d387cf67df.
The analysis was wrong: The first 20ms of latency are introduced by the source
already and put into the latency query, making it only necessary to cover the
additional 20ms of audiomixer inside audiomixer.
This prevents it from going into passthrough after receiving 2
byte-stream caps (different ones) as it would keep the have_pps and
have_sps set to true and would just go into passthrough without
updating its caps.
This patch makes it reset its stream information to restart properly
when new caps are received.
https://bugzilla.gnome.org/show_bug.cgi?id=745409
To avoid useless renegotiation of the pipe we can check for
negotiated caps on src_filter and compare it with requested
filter. If the caps intersect, avoid restart.
Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
https://bugzilla.gnome.org/show_bug.cgi?id=672610
Let's assume a source that outputs outputs 20ms buffers, and audiomixer having
a 20ms output buffer duration. However timestamps don't align perfectly, the
source buffers are offsetted by 5ms.
For our ASCII art picture, each letter is 5ms, each pipe is the start of a
20ms buffer. So what happens is the following:
0 20 40 60
OOOOOOOOOOOOOOOO
| | | |
5 25 45 65
IIIIIIIIIIIIIIII
| | | |
This means that the second output buffer (20 to 40ms) only gets its last 5ms
at time 45ms (the timestamp of the next buffer is the time when the buffer
arrives). But if we only have a latency of 20ms, we would wait until 40ms
to generate the output buffer and miss the last 5ms of the input buffer.
The two branches of the if conditional are identical, which means in all cases
the same gst_asf_put_guid() will be executed. Do it directly.
CID #1226448
the calculations for detecting the videomark is being repeated
in for loop unnecessarily. Moving this outside of for loop
such that the code need not be executed evertime the loop is executed.
https://bugzilla.gnome.org/show_bug.cgi?id=744778
Value stored in ret will be ovewritten in the next iteration of the loop. Which
means it is never used.
Plus a style issue to make gst-indent happy and allow the commit.
Don't use private GMutex implementation details to check
whether it has been freed already or not. Just turn dispose
function into finalize function which will only be called
once, that way we can just clear the mutex unconditionally.
the calculations for drawing the videomark is being repeated
in for loop unnecessarily. Moving this outside of for loop
such that the code need not be executed evertime the loop is executed.
https://bugzilla.gnome.org/show_bug.cgi?id=744371
Always update the segment and not only for accurate seeking and always
send a new segment event after seeks.
For non-accurate force a reset of our segment info to start from
where our seek led us as we don't need to be accurate
https://bugzilla.gnome.org/show_bug.cgi?id=743363
Detect invisible pixels, and skip gstspu_vobsub_blend_comp_buffers()
when there are only invisible pixels. This significantly reduces the
CPU load in cases of DVDs which don't use the clip_rect to exclude
processing for parts of the screen where the video is visible.
https://bugzilla.gnome.org/show_bug.cgi?id=667221
There's no reason why audiomixer should override the segment
base of upstream with whatever value it got from a SEEK event,
or even worse... with 0 if there was no SEEK event yet. This
broke synchronization if upstream provided a segment base other
than 0, e.g. when using pad offsets.
Also that this code did things conditional on the element's state
should've been a big warning already that something is just wrong.
If this breaks anything else now, let's fix it properly :)
Also don't do fancy segment position trickery when receiving a
segment event. It's just not correct.
The flush is called on discont and we shouldn't output a new segment
each time a discont happens. So this commit remove the mark for a new
segment when flushing streams by propagating the 'hard' flag passed
on the flusing from the base class.
https://bugzilla.gnome.org/show_bug.cgi?id=743363
Instead of using the GST_OBJECT_LOCK we should have
a dedicated mutex for the pad as it is also associated
with the mutex on the EVENT_MUTEX on which we wait
in the _chain function of the pad.
The GstAggregatorPad.segment is still protected with the
GST_OBJECT_LOCK.
Remove the gst_aggregator_pad_peak_unlocked method as it does not make
sense anymore with a private lock.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Reduce the number of locks simplify code, what is protects
is exposed, but the lock was not.
Also means adding an _unlocked version of gst_aggregator_pad_steal_buffer().
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Assignment is done to variable segment.stop when the intention was to assign to
local variable stop. Instead of overwriting it, the value is now clamped and
segment.stop is set to it soon after.
CID #1265772
AIFF chunks are supposed to be even aligned.
Aligning the SSND chunk will allow the aiff muxer to properly write
chunks (like the ID3 one) at the end of the file.
https://bugzilla.gnome.org/show_bug.cgi?id=727402
This did not actually work since the video_buffer was set to NULL after
the first black frame.
Reported by: Patrik Oldsberg <patrik.oldsberg@ericsson.com>
This patch calls gst_h264_parser_parse_subset_sps() when a
SPS subset NAL type is found.
All the bits required for parsing the SPS subset in NALs were
already there, just we need to call them when the this NAL type
is found.
With this parsing, the number of views (minus 1) attribute is
filled, which was a requirement for negotiating the stereo-high
profile.
https://bugzilla.gnome.org/show_bug.cgi?id=743174
Initial support for MVC NAL units. It is only needed to propagate the
complete set of NAL units downstream at this time.
https://bugzilla.gnome.org/show_bug.cgi?id=696135
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
klass->setup (scope) will always return TRUE since all children of this class
do so, no need to store the return. Besides, the value is overwritten a few
lines down before it is used.
Change helps keep files in sync after:
-base commit a91d521a36
ret is assigned but not used and in the next cycle of the loop it is overwritten
with default_prepare_output_buffer (). If there is a flow error the function
should return instead.
CID #1226475
Value from left_luminance is assigned to out_luminance here, but that stored
value is not used before it is overwritten in the next cycle of the loop.
Removing assignation.
CID #1226473
found is initialized to FALSE to then only be used in two conditional statements
that will always be false, making the blocks inside them dead code. Looking back
in the file's history the setting of the variable's value before it is checked
was dropped as part of the port to 0.11, bringing that value setting back.
https://bugzilla.gnome.org/show_bug.cgi?id=742638
CLAMP checks both if value is '< 0' and '> max'. Value will never be a negative
number since it is an unsigned integer. Removing that check and only checking if
it is bigger than max and setting it appropriately.
Also converting the previous instance of this into MIN() for consistency.
CID 1139793
Some video bitstreams report a too restrictive set of profiles. If a video
decoder was to strictly follow the indicated profile, it wouldn't support that
stream, whereas it could in theory and in practice. So we should relax the
profile restriction for allowing the decoder to get connected with parser.
https://bugzilla.gnome.org/show_bug.cgi?id=739992
CLAMP checks both if y is '< 0' and '> h1'. y will never be a negative number
since it is an unsigned integer. Removing that check and only checking if it
bigger than h1 and setting it to that max approprietaly.
CID 1139792
type is truncated to 0-31 with "& 0x1f", but right after that it is checks if
the value is equivalent to GST_H265_NAL_VPS, GST_H265_NAL_SPS, and
GST_H265_NAL_PPS (which are 32, 33, and 34 respectively). Obviously, this will
never be True if the value is maximum 31 after the truncation.
The intention of the code was to truncate to 0-63.
After further investigation the previous commit is wrong. The code intended to
check if the type is 39 or the ranges 41-44 and 48-55. Just like gsth265parse.c
does. Type 40 would not be complete.
nal_type is the index for a GstH265NalUnitType enum. There are two types of dead
code here:
First, after checking if nal_type is >= 39 there are two OR conditionals that
check if the value is in ranges higher than that number, so if nal_type >= 39
falls in the True branch those other conditions aren't checked and if it falls
in the False branch and they are checked, they will always also be False. They
are redundant.
Second, the enum has a range of 0 to 40. So the checks for ranges higher than 41
should never be True.
Removing this redundant checks.
CID 1249684
Everytime a buffer is being provided from baseparse, we are parsing all the data from the beginning.
But since we would have already parsed some of the data in the previous iterations,
it doesnt make much sense to keep parsing the same everytime.
Hence skipping the data which is already read in previous iterations to improve the parsing performance.
https://bugzilla.gnome.org/show_bug.cgi?id=740058
The image capture mutex and the pad object lock would cause a race
if the pad query was made right when the image probe was running.
The image probe needs the capture mutex and the querying would need
the pad object lock.
