Anton Obzhirov
4504356dda
gleffects: port all effects to GLES2.0
...
https://bugzilla.gnome.org/show_bug.cgi?id=745955
2015-03-30 19:06:44 +01:00
Thiago Santos
f00aec48fa
hlssink: implement a chain_list to request key unit for segments
...
upstream might send buffer lists instead of buffers and hlssink's
probe won't get called and a new segment won't be created when needed.
This patch fixes it by adding a chain_list function to the sink pad
that will just pass through the whole bufferlist if no segment needs
to be requested at the moment or convert the list into buffers to
check the proper timestamp to request the next key-unit that will
start the segment.
https://bugzilla.gnome.org/show_bug.cgi?id=746906
2015-03-30 12:31:08 -03:00
Mark Nauwelaerts
32e87b1024
mxfdemux: resurrect some flow return handling
...
https://bugzilla.gnome.org/show_bug.cgi?id=744572
2015-03-28 18:22:29 +01:00
Mark Nauwelaerts
b2d109242f
mpegdemux: resurrect some flow return handling
...
https://bugzilla.gnome.org/show_bug.cgi?id=744572
2015-03-28 18:22:29 +01:00
Thiago Santos
66b01c9a0c
adaptivedemux: do not try to advance fragment if there is none
...
It might return OK from subclasses and it could cause a bitrate
renegotiation. For DASH and MSS that is ok as they won't expose
new pads as part of this but it can cause issues for HLS as
it will expose new pads, leading to pads that will only have EOS
that cause decodebin to fail
https://bugzilla.gnome.org/show_bug.cgi?id=745905
2015-03-27 16:22:57 -03:00
Olivier Crête
45422791f7
rtpopuspay: Forward stereo preferences from caps upstream
...
https://bugzilla.gnome.org/show_bug.cgi?id=746617
2015-03-25 15:26:55 -04:00
Olivier Crête
c82a2d4aa0
rtpopuspay: Set the number of channels to 2 as per RFC draft
...
https://bugzilla.gnome.org/show_bug.cgi?id=746617
2015-03-25 15:25:29 -04:00
Jun Xie
9e6198d9ef
dashdemux: set default @startNumber and also avoid wrong overwrite
...
Set default @startNumber to 1, if @startNumber is missing at all level.
Also avoid incorrect overwriting inherited value.
https://bugzilla.gnome.org/show_bug.cgi?id=746347
2015-03-24 16:35:59 -03:00
Luis de Bethencourt
78ce8ff74f
audioaggregator: check sink caps are valid
2015-03-24 16:18:22 +00:00
Luis de Bethencourt
cfdcb14730
Revert "audioaggregator: check sink caps are valid"
...
This reverts commit 6d4d0d1cdf
.
Never put code with side effects into an assertion, it can be compiled out
2015-03-24 16:17:00 +00:00
Luis de Bethencourt
6d4d0d1cdf
audioaggregator: check sink caps are valid
...
CID #1291622
2015-03-24 15:53:17 +00:00
Luis de Bethencourt
fb758d019c
opusenc: fall through switch statement
...
Adding a comment makes coverity happy and quells the issue.
CID 1291629
2015-03-24 15:14:05 +00:00
Nirbheek Chauhan
dceb8aefd1
videoaggregator: Document why buffer_vinfo is needed
2015-03-24 14:54:33 +01:00
Nirbheek Chauhan
802a29eb48
videoaggregator: Check if there's a previous buffer to 'keep'
...
If we want to keep a previous buffer but there's no previous buffer, we actually
need more data instead.
2015-03-24 14:54:33 +01:00
Philippe Normand
14ac40f106
gl/dispmanx: surfaceless EGL context support
...
Show the DispmanX window only if there's no shared external GL context
set up. When a window is required by the context a transparent
DispmanX element is created and later on made visible by the ::show
method.
https://bugzilla.gnome.org/show_bug.cgi?id=746632
2015-03-24 11:12:05 +00:00
Luis de Bethencourt
b3ad336af1
gaudieffects: clean solarize code
2015-03-23 15:10:39 +00:00
Luis de Bethencourt
70cc73fd70
gaudieffects: removing values only used once
2015-03-23 15:10:39 +00:00
Luis de Bethencourt
110fa9c09c
gaudieffects: small cleanup in headers
2015-03-23 15:10:39 +00:00
Sebastian Dröge
9dd671abe3
opusenc: Set output format immediately after creating the encoder instance
...
We know the caps by then, there's no need to wait until we actually receive
the first buffer.
2015-03-23 13:15:30 +01:00
Sebastian Dröge
948fbe154f
opusenc: Remove another unused variable
2015-03-23 13:13:35 +01:00
Sebastian Dröge
42b5cc8938
opusenc: Remove useless headers and header_sent variables from the instance struct
...
They are only used inside a single function.
2015-03-23 13:12:25 +01:00
Sebastian Dröge
856bb027f9
opus: Handle sprop-stereo and sprop-maxcapturerate RTP caps fields
...
https://bugzilla.gnome.org/show_bug.cgi?id=746617
2015-03-23 12:24:55 +01:00
Sebastian Dröge
a128502221
opusdec: Take channels and sample rate from the caps if we have no stream header
2015-03-23 12:09:25 +01:00
Sebastian Dröge
c2f38cd054
opusdec: Reset the decoder if the caps change
2015-03-23 12:09:09 +01:00
Sebastian Dröge
bb5b0f2d12
opusdec: Take output sample rate from the stream headers too
...
This way we let opusdec do the resampling if needed and don't carry
around buffers with a too high sample rate if not required.
While Opus always uses 48kHz internally, this information from the
header specifies which frequencies are safe to drop.
2015-03-23 11:57:09 +01:00
Sebastian Dröge
716eaf765b
opusheader: Put number of channels and sample rate into the caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=746617
2015-03-23 11:56:09 +01:00
Julien Isorce
e1e17dcadb
glwindow: remove unused gl_thread field
2015-03-22 19:12:15 +01:00
Julien Isorce
d35e3b8481
gldisplay: fix GThread leak
...
https://bugzilla.gnome.org/show_bug.cgi?id=746541
2015-03-22 19:03:19 +01:00
Nicola Murino
0719c8c766
glimagesink: fix caps leak
...
https://bugzilla.gnome.org/show_bug.cgi?id=746541
2015-03-21 16:52:08 +00:00
Jose Antonio Santos Cadenas
ff11a1a8a0
srtpdec: Add support for buffer list
...
https://bugzilla.gnome.org/show_bug.cgi?id=746387
2015-03-19 16:31:47 +01:00
Jose Antonio Santos Cadenas
8f8b0f5478
srtpenc: Do not drop all buffers in buffer list if one fails
...
https://bugzilla.gnome.org/show_bug.cgi?id=746387
2015-03-19 16:27:21 +01:00
Luis de Bethencourt
fd3c60de34
gaudieffects: update copyright dates of dilate
2015-03-19 13:59:42 +00:00
Luis de Bethencourt
78ebbb4fd7
gaudieffects: factorize transform code of dilate
2015-03-19 13:58:21 +00:00
Sebastian Dröge
82b73713cb
dtls: Pass the connection instance as data to the thread pool
...
No need to ref/unref the connection every time we push something on the pool.
However we have to provide non-NULL data to the pool, so let's just give it
some coffee.
2015-03-19 14:04:28 +01:00
Sebastian Dröge
602b1ca3d2
dtls: Remove unused thread struct field
2015-03-19 13:55:53 +01:00
Sebastian Dröge
fd609f6bc0
dtls: Use a shared thread pool for the timeouts
...
This way we will share threads with other DTLS connections if possible, and
don't have to start/stop threads for timeouts if there are many to be handled
in a short period of time.
Also use the system clock and async waiting on it for scheduling the timeouts.
2015-03-19 13:30:00 +01:00
Sebastian Dröge
4072666c7d
dtls: Shutdown timeout thread when it's not needed
...
It is not needed most of the time and usually we have a thread
idling around doing nothing all the time after the first few seconds.
2015-03-18 18:21:35 +01:00
Matthew Waters
0ee027b6ee
gl/docs: update some doc comments
2015-03-18 10:13:25 -07:00
Sebastian Dröge
7782bdf286
dtlsenc: Clear the queue when deactivating the pad
2015-03-18 17:40:47 +01:00
Sebastian Dröge
4fed95c534
dtlsenc: Handle pad activity states properly
2015-03-18 17:40:34 +01:00
Sebastian Dröge
ff01df1093
dtlsenc: Don't manually activate/deactivate srcpad
2015-03-18 17:35:12 +01:00
Jose Antonio Santos Cadenas
8d2e98bc3f
srtpdec: Separate buffer encoding functionality into a different function
...
https://bugzilla.gnome.org/show_bug.cgi?id=746387
2015-03-18 16:26:48 +01:00
Jose Antonio Santos Cadenas
f295beda07
srtpenc: Add support for buffer list
...
https://bugzilla.gnome.org/show_bug.cgi?id=746387
2015-03-18 16:26:48 +01:00
Jose Antonio Santos Cadenas
ef4a904700
srtpenc: Add missing locks
...
https://bugzilla.gnome.org/show_bug.cgi?id=746387
2015-03-18 16:22:58 +01:00
Jose Antonio Santos Cadenas
2d3938c063
srtpenc: Split chain functionality so it can be reused for buffer list
...
https://bugzilla.gnome.org/show_bug.cgi?id=746387
2015-03-18 16:21:36 +01:00
Sebastian Dröge
3614302cf8
dtlsenc: Use a GQueue instead of a GPtrArray
...
Using a GPtrArray as a queue is not very efficient as the whole
array has to be copied whenever an element is removed from the
beginning.
2015-03-18 13:52:38 +01:00
Sebastian Dröge
47b73f0d52
dtlsdec: Fix locking
...
Especially don't hold any mutex while adding/removing pads or pushing data.
2015-03-18 10:06:47 +01:00
Sebastian Dröge
989c2ef67b
dtlsdec: Add support for buffer lists
2015-03-18 10:06:15 +01:00
Sebastian Dröge
2082476efb
dtls: Fix some search & replace mistakes from renaming the elements
2015-03-18 09:46:40 +01:00
Jose Antonio Santos Cadenas
e2cdbdae13
srtpenc: Improve memory management on chain function
...
Avoiding copy the buffer twice, one while mapping and other with mencpy
https://bugzilla.gnome.org/show_bug.cgi?id=746356
2015-03-17 18:18:43 +01:00