Allows proxying the control interface from one property on one GstObject
to another property (of the same type) in another GstObject.
E.g. in a parent-child relationship, one may need to
gst_object_sync_values() on the child and have a binding (set elsewhere)
on the parent update the value.
Note: that this doesn't solve GObject property forwarding and must be
taken care of by the implementation manually or using GBinding.
https://bugzilla.gnome.org/show_bug.cgi?id=774657
Add unit test to ensure that.
It can be a normal execution path to do some map trials and there is
no need to worry the user in that case.
The application has to check the return value of gst_memory_map.
https://bugzilla.gnome.org/show_bug.cgi?id=765600
In file included from ../../libs/gst/net/gstntppacket.c:35:0,
from netclock-replay.c:25:
../../config.h:546:0: error: "__MSVCRT_VERSION__" redefined [-Werror]
#define __MSVCRT_VERSION__ 0x0601
In file included from /usr/x86_64-w64-mingw32/sys-root/mingw/include/crtdefs.h:10:0,
from /usr/x86_64-w64-mingw32/sys-root/mingw/include/stdio.h:9,
from netclock-replay.c:21:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/_mingw.h:220:0: note:
this is the location of the previous definition
# define __MSVCRT_VERSION__ 0x0700
https://bugzilla.gnome.org/show_bug.cgi?id=774108
Introduce a new operator ':' - e.g. element1 ':' element2
For example, 'uridecodebin : encodebin' -
if the encodebin has multiple profiles compatible with the
decodebin, multiple links will be created.
With '!' , after one delayed link is successfully done, the
pad-added callback is disconnected.
https://bugzilla.gnome.org/show_bug.cgi?id=751450
This carries over code for a similar test from multiqueue to ensure full
control over the dataflow while testing. (The previous attempt was racy
since the fill level changed without any thread sync with the test code.)
https://bugzilla.gnome.org/show_bug.cgi?id=771210
Basically we already have each test with a 20sec timeout,
and testsuite can last more than the default 30secs from
meson. 3 minutes is another arbitrary timeout but should
be good enough.
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large multiqueue max sizes and watermarks like 0.5%.
Also adding a test to check the fill and watermark level behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=770628
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large queue2 max sizes and watermarks like 0.5%.
Also adding a test to check the fill and watermark level behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=769449
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
A new event which precedes EOS in situations where we
need downstream to unblock any pads waiting on a stream
before we can send EOS. E.g, decodebin draining a chain
so it can switch pads.
https://bugzilla.gnome.org/show_bug.cgi?id=768995
Redirection messages are already used in fragmented sources and in
uridecodebin, so it makes sense to introduce these as an official message
type.
https://bugzilla.gnome.org/show_bug.cgi?id=631673
We don't do calculations with different units (buffer offsets and bytes)
anymore but have functions for:
1) getting the number of bytes since the last discont
2) getting the offset (and pts/dts) at the last discont
and the previously added function to get the last offset and its distance from
the current adapter position.
https://bugzilla.gnome.org/show_bug.cgi?id=766647
API: gst_buffer_prev_offset
API: gst_buffer_get_offset_from_discont
The gst_buffer_get_offset_from_discont() method allows retrieving the current
offset based on the GST_BUFFER_OFFSET of the buffers that were pushed in.
The offset will be set initially by the GST_BUFFER_OFFSET of
DISCONT buffers, and then incremented by the sizes of the following
buffers.
The gst_buffer_prev_offset() method allows retrievent the previous
GST_BUFFER_OFFSET regardless of flags. It works in the same way as
the other gst_buffer_prev_*() methods.
https://bugzilla.gnome.org/show_bug.cgi?id=766647
It is better to have separate tests:
1) the test name will tell what is broekn when the test fails
2) we still run the other tests when one assert fails
3) the tests are easier to understand
4) we don't rely on sie effect of previous actions
5) ...
Also ix the assertion message for the name checks (Gst -> fakeobject).
GObject allow calling g_object_notify() within set_property() and
won't notify it twice. As it was raised during review, add a unit test to
make sure.
https://bugzilla.gnome.org/show_bug.cgi?id=766923
This means applications and bin sub-classes can easily track when
a new child element is added to the pipeline sub-hierarchy or
removed.
Currently doesn't signal deep added/removed for elements inside
a bin if a bin is added/removed.
https://bugzilla.gnome.org/show_bug.cgi?id=578933
gst_check_setup_sink_pad() internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free the
buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=765903
The test rely on bus being flushed when setting the bin to the NULL state which
is not the case. This apply only when setting the pipeline state to
NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=765720
This ensures the following special case is handled properly:
1. Queue is empty
2. Data is pushed, fill level is below the current high-threshold
3. high-threshold is set to a level that is below the current fill level
Since mq->percent wasn't being recalculated in step #3 properly, this
caused the multiqueue to switch off its buffering state when new data is
pushed in, and never post a 100% buffering message. The application will
have received a <100% buffering message from step #2, but will never see
100%.
Fix this by recalculating the current fill level percentage during
high-threshold property changes in the same manner as it is done when
use-buffering is modified.
https://bugzilla.gnome.org/show_bug.cgi?id=763757
We need to clear some global state and register a new test
basetransform subclass for each test because we do things
in class_init base on global state.
https://bugzilla.gnome.org/show_bug.cgi?id=623469
The test assumed that if a buffer has the same pointer address as
before it is in fact the same mini object and has been re-used by
the pool. This seems to be mostly true, but not always. The buffer
might be destroyed and when a new buffer is created the allocator
might return the same memory that we just freed.
Instead attach a qdata with destroy notify function to buffer
instances we want to track to make sure the buffer actually
gets finalized rather than resurrected and put back into the pool.
Be notified in the application thread via bus messages about
notify::* and deep-notify::* property changes, instead of
having to deal with it in a non-application thread.
API: gst_element_add_property_notify_watch()
API: gst_element_add_property_deep_notify_watch()
API: gst_element_remove_property_notify_watch()
API: gst_message_new_property_notify()
API: gst_message_parse_property_notify()
API: GST_MESSAGE_PROPERTY_NOTIFY
https://bugzilla.gnome.org/show_bug.cgi?id=763142
Checking the current element's state when we're adding pads to
the parent element is checking the wrong thing.
Silences a 'attempting to add an inactive pad to a running element'
warning when adding a ghost pad to a running parent bin of the parent
bin of the element.
https://bugzilla.gnome.org/show_bug.cgi?id=764176
This takes readings in the form of ...
<local_1> <remote_1> <remote_2> <local_2>
... with one observation per line, and then replays it using the
netclientclock code.
The output is the statistics structure emitted by the netclientclock,
which can then be analysed and tuned once we get those readings for
potential edge-cases.
It should be possible to find some inputs with "bad" data and convert
this into a unit test for future tweaks to run against.
The alias define GST_TYPE_PARENT_BUFFER_META_API_TYPE is wrong and
breaks the usage of gst_buffer_get_parent_buffer_meta().
This patch fixes the GType alias and make another alias to keep the API
compatibility guarded by GST_DISABLE_DEPRECATED.
Also added a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=763112
When holding a regular ref it will cause the GstBus to never
reach 0 references and it won't be destroyed unless the application
explicitly calls gst_bus_remove_signal_watch().
Switching to weakref will allow the GstBus to be destroyed.
The application is still responsible for destroying the
GSource.
https://bugzilla.gnome.org/show_bug.cgi?id=762552
Showcases the regression introduced by this commit:
Commit: ab55ad7eaa
Author: Stian Selnes <stian@pexip.com>
Date: Wed Jan 27 13:20:23 2016 +0100
ghostpad: Do nothing in _internal_activate_push_default
Fixes a race where an entry is set to BUSY in
gst_system_clock_id_wait_jitter() and is UNSCHEDULED before
gst_system_clock_id_wait_jitter_unlocked() starts processing it. The
wakeup added by gst_system_clock_id_unschedule() must be cleaned up.
Two stress tests are added. One test that triggers the specific issue
described above. The second stresses the code path where a wait is
rescheduled because the poll returned early.
https://bugzilla.gnome.org/show_bug.cgi?id=761586
Change the gst_tracer_record_new() api to take the parameters the make the
spec structure directly. This allows us to own the top-level structure and
also collect the args so that we can take ownership of the sub-structures.
https://bugzilla.gnome.org/show_bug.cgi?id=760821
