When dealing with streams/contents which have large duration, it is
more user-friendly to show more details in the high values (hours or days)
than in the microseconds.
This patch will use the following formatting schemes:
* Below 1hour : MM:SS.SSS
* Below 24hours : HHhMMmSSs
* Above : DDdHHhMMm
In GStreamer 1.12 and older, the GstBaseSrc live lock used to be held while
create() virtual function was called. As appsrc pushes serialized event in
that virtual function, we ended up with some deadlock while setting the
state to NULL. This test simulates this situation.
https://bugzilla.gnome.org/show_bug.cgi?id=783301
Sending an event can accepted event if the caps were rejected
because the event could be queued and processed later.
Also send a drain query in the caps test to make sure that the
event has been processed.
https://bugzilla.gnome.org/show_bug.cgi?id=781673
Performing a gst_sdp_media_get_caps_from_media() would result in
changing fields in the GstSDPMedia violating the const tag in the
function declaration.
Before there would be a line with a=rtpmap:96 VP8/90000
after, that attribute would only contain a=rtpmap:96
Fix by performing modifications on duplicated strings instead of on
the internal values.
Also add a simple test for checking that the representation doesn't
change by a gst_sdp_media_get_caps_from_media()
The path was only adding the build root. We need to also add the
prefix for the case we work with installed setup. As the search is
recursive, I had to remove any subdirectory to the already present build
root.
The term stride is confusing here, since the stride is always use
to signal the pixel row size of an image (including padding). Also
a frame may have a single stride, which adds to the confusion. This
patch uses frame-size, which simply indicate the frame size in the
case the images have some padding in between.
https://bugzilla.gnome.org/show_bug.cgi?id=780053
This allow using those property through gst-launch-1.0. This type
gained a deserilizer recently. The syntax is: <val1, val2, ...>.
Note that we also use the type int instead of uint to avoid having
to cast when specifying the values. The deserilizers assume
int by default.
https://bugzilla.gnome.org/show_bug.cgi?id=780053
In gst_video_time_code_is_valid, also check for invalid
ranges when using drop-frame TC. Refactor some code which
broke after the check was added.
https://bugzilla.gnome.org/show_bug.cgi?id=779010
See https://bugzilla.gnome.org/show_bug.cgi?id=773666
This would ideally be solved in baseparse but that requires further
thought at this point, and in the meantime it would be good to have
rawbaseparse not assert on this but handle it gracefully instead.
Duration query would return TRUE and duration=-1. This
worked in the unit test because the unit test implementation
was a bit broken.
Both queries need to access rate with a lock.
Fix broken duration query test as well. It relied on broken
behaviour by the videorate query handler, and also it was
implemented as a downstream query rather than an upstream
query. And we must return HANDLED from the probe so that the
query we intercept actually returns TRUE.
https://bugzilla.gnome.org/show_bug.cgi?id=699077
In some case we might have EncodingProfile that will be defined
in a way that, for example if a Preset is not present, another
profile for that stream should be used.
A test is added showing the feature.
https://bugzilla.gnome.org/show_bug.cgi?id=776188
To make the structs usable in bindings, and fix
gstrtspmessage.c:1188: Warning: GstRtsp:
gst_rtsp_message_parse_auth_credentials: return value: Invalid
non-constant return of bare structure or union; register as
boxed type or (skip)
https://bugzilla.gnome.org/show_bug.cgi?id=774416
Deterministic generation of snow and smpte is important for tests so
that it's not affected by other videotestsrc elements in current or
possibly previous tests.
https://bugzilla.gnome.org/show_bug.cgi?id=773102
Also the format must be fixed on the default raw caps. If not
gst_video_info_from_caps() will fail and
gst_video_decoder_negotiate_default_caps() return FALSE.
The test simulates the use case where a gap event is received before
the first buffer causing the decoder to fall back to the default caps.
https://bugzilla.gnome.org/show_bug.cgi?id=773103
Add a test that check that we handle time ranges (a range of time that maps to
the same sample).
Also update the other tests to use our check api to compare int64 values to get
better output on failure.
Split large tests into small tests and name them specifically. Use helpers to
avoid repetition. Make sure the order in the file is the same as we add the to
the suite.
Workaround source_root being the root directory of all projects
in the subproject case.
Remove now unneeded getpluginsdir and define c++ tests in the same loop.
Bump meson requirement to 0.35
Comparing floats for equality is not necessarily going to
work reliably, so use fail_unless_equals_float() for this.
Test would fail on x86 (Intel Atom x5-Z8300).
It's been broken for years, and it's unlikely it will ever
be fixed for collectpads/adder now that there's audiomixer
which works fine. So let's disable it, since all it does
is that it creates noise that distracts from other failures.
https://bugzilla.gnome.org/show_bug.cgi?id=708891
The videoscale test takes eternities to run, that's not
great. Split the test into multiple ones. That way they
can be run in parallel. Reduces time to run all tests in
-base from 29 secs to 12 secs when using meson/ninja.
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
With contributions from Jan Schmidt <jan@centricular.com>
* decodebin3 and playbin3 have the same purpose as the decodebin and
playbin elements, except make usage of more 1.x features and the new
GstStream API. This allows them to be more memory/cpu efficient.
* parsebin is a new element that demuxers/depayloads/parses an incoming
stream and exposes elementary streams. It is used by decodebin3.
It also automatically creates GstStream and GstStreamCollection for
elements that don't natively create them and sends the corresponding
events and messages
* Any application using playbin can use playbin3 by setting the env
variable USE_PLAYBIN3=1 without reconfiguration/recompilation.
Elements inherited from GstAudioDecoder, supporting PLC and introducing
delay produce invalid timestamps. Good example is opusdec with in-band FEC
enabled. After receiving GAP event it delays the audio concealment until
the next buffer arrives. The next buffer will have DISCONT flag set which
will make GstAudioDecoder to reset it's internal state, thus forgetting
the timestamp of GAP event. As a result the concealed audio will have the
timestamp of the next buffer (with DISCONT flag) but not the timestamp
from the event.
The serialization of double typed geographical
coordinates to DMS system supported by the exif
standards was previously truncated without need.
The previous code truncated the seconds part of
the coordinate to a fraction with denominator
equal to 1 causing a bug on the deserialization
when the test for the coordinate to be serialized
was more precise.
This patch applies a 10E6 multiplier to the numerator
equal to the denominator of the rational number.
Eg. Latitude = 89.5688643 Serialization
DMS Old code = 89/1 deg, 34/1 min, 7/1 sec
DMS New code = 89/1 deg, 34/1 min, 79114800UL/10000000UL
Deserialization
DMS Old code = 89.5686111111
DMS New code = 89.5688643
The new test tries to serialize a higher precision
coordinate.
The types of the coordinates are also guint32 instead
of gint like previously. guint32 is the type of the
fraction components in the exif.
https://bugzilla.gnome.org/show_bug.cgi?id=767537
It internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free
the buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766226
It internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free
the buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766226
It internally uses gst_check_chain_func() so we
should call gst_check_drop_buffers() when tearing down tests to free
the buffers which have been exchanged through the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766226
This tag match the EXIF_TAG_FOCAL_LENGTH_IN_35_MM_FILM exif tag and is
stored on a short. Hence there is a precision loss compared to the
GstTag which is a double value.
https://bugzilla.gnome.org/show_bug.cgi?id=753930
Doing so prevents us dropping buffers in the rare, but possible, situations,
when the stream changes SSRC and new sequence numbers does not differ
much from the last sequence number from previous SSRC. For example:
ssrc - 0xaaaa 101,102,103,104 ssrc - 0xbbbb 102, 103, 104, 105...
In the scenario above we don't want to drop the first 3 packets of
0xbbbb stream.
https://bugzilla.gnome.org/show_bug.cgi?id=764459
WebVTT is a new subtitle format for HTML5 video. In this first
version of the parser the cue settings are parsed but only stored in
the internal parser state structure. Later on these settings could be
part of the GstBuffer metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=629764
The default one is 6 minutes, the test was using 5 minutes so just
resort to using the default.
For the non-valgrind test also use the default 20 secs instead of
reducing it to 6s. No real reason to set a custom value here.
When caps are already negotiated it should be possible to
select formats other than the one that was negotiated. If downstream
allows alpha video caps and it has already negotiated to a non-alpha
format, caps queries should still return the alpha caps as a possible
format as caps renegotiation can happen.
Includes tests (for compositor) to check that caps queries done after
a caps has been negotiated returns complete results
https://bugzilla.gnome.org/show_bug.cgi?id=757610
Reduce resolution, which shouldn't make any difference
to what's tested here. Makes test finish in less than
half the time it took before (8s vs. 21s).
value of 32768L << 16 and 1L << 31 is 2147483648
but it exceeds the positive range of int which is 2147483647
resulting in integer overflow error. Use G_GINT64_CONSTANT instead of L.
https://bugzilla.gnome.org/show_bug.cgi?id=760769
We did not take the sample size into account. Rearrange the tests to have more
conversion test and an extra test case for passthrough operations.
Fixes#759890
Use (1 << 31) as the multiplier for int<->float conversions. This makes
sure that int->float conversions always end up with floats between
[-1.0, 1.0].
For the conversion from float to int, this multiplier will give the complete
int range after we perform clipping.
Change the unit test to take this into consideration.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755301
Encrypted RTP buffers may contain encrypted padding, hence it's
necessary to have an option to relax the validation in order to
successfully map the buffer.
When the flag GST_RTP_BUFFER_MAP_FLAG_SKIP_PADDING is set
gst_rtp_buffer_map() will map the buffer like if padding is not
present.
https://bugzilla.gnome.org/show_bug.cgi?id=752705
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753852
While creating caps in audiointerleave tests, bitmask is being set as 0x9
This is resulting in segmentation fault. Fix the same by typecasting to guint64
https://bugzilla.gnome.org/show_bug.cgi?id=755840
The obscured check in compositor was using the dimensions of the pad to clamp
the h/w of the pad instead of the output resolution, and was doing an incorrect
calculation to do so. Fix that by simplifying the whole calculation by using
corner coordinates. Also add a test for this bug which fell through the cracks,
and just skip all the obscured tests if the pad's alpha is 0.0.
https://bugzilla.gnome.org/show_bug.cgi?id=754107
Push all pending events before pushing the gap. This ensures the
segment is pushed before the gap so it can be properly translated
to the running time
Includes unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=753360
We need to sync the pad values before taking the aggregator and pad locks
otherwise the element will just deadlock if there's any property changes
scheduled using GstController since that involves taking the aggregator and pad
locks.
Also add a test for this.
https://bugzilla.gnome.org/show_bug.cgi?id=749574
The padding (if any) is included in the length of the last packet, see
RFC 3550.
Section 6.4.1:
padding (P): 1 bit
If the padding bit is set, this individual RTCP packet contains
some additional padding octets at the end which are not part of
the control information but are included in the length field. The
last octet of the padding is a count of how many padding octets
should be ignored, including itself (it will be a multiple of
four).
Section A.2:
* The padding bit (P) should be zero for the first packet of a
compound RTCP packet because padding should only be applied, if it
is needed, to the last packet.
* The length fields of the individual RTCP packets must add up to
the overall length of the compound RTCP packet as received.
https://bugzilla.gnome.org/show_bug.cgi?id=751883
When the 'ignore-eos' property is set on a pad, compositor will keep resending
the last buffer on the pad till the pad is unlinked. We count the buffers
received on appsink, and if it's more than the buffers sent by videotestsrc, the
test passes.
Add flags and enums to support multiview signalling in
GstVideoInfo and GstVideoFrame, and the caps serialisation and
deserialisation.
videoencoder: Copy multiview settings from reference input state
Add gst_video_multiview_* support API and GstVideoMultiviewMeta meta
https://bugzilla.gnome.org/show_bug.cgi?id=611157
According to this section of the rfc.
https://tools.ietf.org/html/rfc5506#section-3.4.2
The validation should be updated to accept more types of RTCP
packages, with this mask change feedback packages will be also
accepted.
Change-Id: If5ead59e03c7c60bbe45a9b09f3ff680e7fa4868
The original 0/1 framerate must still be allowed to be configured
on the upstream side of videorate, otherwise future caps renegotiation
is going to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=750032
[API] gst_discoverer_info_to_variant
[API] gst_discoverer_info_from_variant
[API] GstDiscovererSerializeFlags
+ Serializes as a GVariant
+ Adds a test
+ Does not serialize potential GstToc (s)
https://bugzilla.gnome.org/show_bug.cgi?id=748814
Rather than one of the input pad video info's.
The test checking this was not constraining the output frame size
to ensure that the out of frame stream was not being displayed.
We verify that all the buffers on an obscured sinkpad are skipped by overriding
the map() function in the GstVideoMeta of the buffers to set a variable when
called. We also test that the buffers do get mapped when they're not obscured.
Blame^WCredit for the GstVideoMeta map() idea goes to Tim.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
scrubby has two options, wav and playbin. Wav takes a file location so make
the playbin option take a file location as well instead of an uri. This also
means the usage help string will be correct for the playbin option.
In scrubby, there is no need to link wavparse with the sink dynamically.
The pad is available when the element is generated.
Change video and audio sinks to the automatically detected sinks.
gtk_widget_set_double_buffered () has been deprecated since GTK 3.14.
Also, widgets are realized automatically and gtk_wiget_realize () is only
meant to be used in widget implementations.
A bitmask is 64 bits, but integer immediates are passed as int
in varargs, which happen to be 32 bit with high probability.
This triggered a valgrind jump-relies-on-uninitalized-value
report well away from the site, since it doesn't trigger on
stack accesses, and there must have been enough zeroes to stop
g_object_set at the right place.
Remove all the bus watch and main loop code from the block_deadlock
test, it's not needed: neither pipeline will ever post an EOS or ERROR
message on the bus, and we're the only ones posting an error, from a
timeout. Might just as well just sleep for a bit and then do whatever
we want to do.
Don't gratuitiously set tcase timeout, just use whatever is the
default (or set via the environment).
Make individual pipeline runs shorter.
Check for valgrind and only do a handful iterations when running
in valgrind, not 100 (each iteration takes about 4s on a core i7).
Make videotestsrc output smaller buffers than the default resolution,
we don't care about the buffer contents here anyway.
Fixes test timeouts when run in valgrind.
On slower systems, or under high system load (e.g. check-valgrind),
the sending_buffers_with_9_gstmemories test would sometimes fail,
because the read call only returns 32 bytes instead of the full
36 bytes expected. This is because multisocketsink might end up
doing a partial write of 32 bytes first, and then write the
missing 4 bytes later, but since we don't wait for all of data
to be written, there's a short window where our read call in the
unit test might then only receive the 32 bytes written so far,
which makes it deeply unhappy.
Instead, make sure we loop to read all bytes.
This test sets a rather short timeout, increase this when
we run under valgrind. Also add a short sleep to the
fakesrc ! fakesink pipeline to avoid thrashing the CPU,
which would often not stop the main loop when it should.
Also fix wrong (0.10) return value from pad probe callback.
In case upstream does not provide videorate with framerate information,
it will detect the current framerate from the buffer it received,
but if downstream forces the use of variable framerate (most probably
through the use of a caps filter with framerate = 0 / 1), videorate will
respect that.
And add some unit tests
https://bugzilla.gnome.org/show_bug.cgi?id=734424
When generating segment, we can't assume the first buffer is actually
the first expected one. If it's not, we need to adjust the segment to
start a bit before.
Additionally, we if don't know when the stream is suppose to have
started (no clock-base in caps), it means we need to keep everything in
running time and only rely on jitterbuffer to synchronize.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
This provides notification that the socket in use was closed by the peer
and gives an opportunity to replace it with a new one which is not
closed, allowing reading from many sockets in order.
I use this in pulsevideo to implement reconnection logic to handle the
pulsevideo service dieing, such that is can be restarted without
disrupting downstream.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=739546
`socketsrc` can be considered a source counterpart to `multisocketsink`.
It can be considered a generalization of `tcpclientsrc` and
`tcpserversrc`: it contains all the logic required to communicate over
the socket but none of the logic for creating the sockets/establishing
the connection in the first place, allowing the user to accomplish this
externally in whatever manner they wish making it applicable to other
types of sockets besides TCP.
This commit essentially copies the implementation directly from
tcpserversrc. Later patches will tidy the implementation up and
re-implement `tcpclientsrc` and `tcpserversrc` in terms of `socketsrc`.
See https://bugzilla.gnome.org/show_bug.cgi?id=739546
If a buffer is made up of non-contiguous `GstMemory`s `gst_buffer_map`
has to copy all the data into a new `GstMemory` which is contiguous. By
mapping all the `GstMemory`s individually and then using scatter-gather
IO we avoid this situation.
This is a preparatory step for adding support to multisocketsink for
sending file descriptors, where a GstBuffer may be made up of several
`GstMemory`s, some of which are backed by a memfd or file, but I think this
patch is valid and useful on its own.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=746150
Should wait state change complete before start another state change.
Can't ensure can received async-done message when state change from PLAYING to PAUSED.
https://bugzilla.gnome.org/show_bug.cgi?id=736655
Don't feed 64-bit integer variable into vararg function that expects
an unsigned integer to go with GST_TAG_TRACK_NUMBER. This would
cause crashes on 32-bit platforms, and if not that then test
failures if the comparisons fail later (at least on big endian
platforms).
Test that a pipeline can change from PLAYING to PAUSED and back in
the following scenarios:
1. One track reach EOS after pushed some buffers while another track
still pushes buffers
2. One track reach EOS without buffers while another track still pushes
buffers
https://bugzilla.gnome.org/show_bug.cgi?id=736655
The flush stop could have happened between the source trying
to push the segment event and the buffer, this would cause a warning.
Prevent that by taking the source's stream lock while flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
With the current audiomixer, the input caps need to be the same,
otherwise there is an unavoidable race in the caps negotiation. So
enforce that using capsfilters
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Add the supported seeking range in the advanced seek area.
Also implement seeking querying the pipeline to retrieve those
values and show to the user. It is done in a smaller frequency
compared to the position/duration querying.
Allows subclasses to do custom caps query replies.
Also exposes the standard caps query handler so subclasses can just
extend on top of it instead of reimplementing the caps query proxying.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
Refactor the encoder's caps query proxying function to a common place
and use it in the videodecoder to proxy downstream restrictions.
The new function is private to the gstvideo lib.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
The set_format vfunc does not pass ownership of the caps
to the decoder, so we mustn't unref the caps there.
gst_event_new_caps() does not take ownership of the caps
passed, so we must unref the caps afterwards.
Fixes leaks when running test in valgrind in 1.4 branch.
Shows visual result of blending a logo on top of
a video surface, esp. when the logo is partially
outside of the video surface and needs to be
clipped.
https://bugzilla.gnome.org/show_bug.cgi?id=739281
Add test to check rendering of overlays of different sizes
that are completely or partially outside the video surface.
Once the overlay is blended to the video, verify if the
position of the blended overlay is as expected, by comparing
the pixels of the blended video with the expected values.
https://bugzilla.gnome.org/show_bug.cgi?id=739281
Make an ORC version of the 2x vertical upsampling code.
Improve unit tests, test chroma up and down sampling.
memset buffer in conversion to make valgrind happy.
There don't seem to be any unit tests for the socket handling elements. As
I am about to attempt some refactorings I've added some basic tests which
exercise some of the happy-paths in tcpclientsrc, tcpserversrc,
tcpserversink and tcpclientsink. They should let me know if I've caused
serious breakage.
They are far from exhaustive but are sufficient for me to have caught a few
memory-leaks in the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=739544
Combine multiplies in 4x filters.
Rename conversion functions to make them nicer in orc.
Add ORC versions for various downsampling algorithms
Add unit test chroma resampler
Make a more complete pack/unpack test, check if the image after
pack/unpack has the same color and precision, and has correctly
duplicated subsampled pixels.
Add a video scaler object build on top of the resampler. It has
implementation to deal with interlaced video as well as horizontal and
vertical scaling functions.
Move the conversion code used in videoconvert to the video library
and expose a simple but generic API to do arbitrary conversion. It can
currently do colorspace conversion but the plan is to add videoscale to
it as well.
See https://bugzilla.gnome.org/show_bug.cgi?id=732415
Adds a new test to textoverlay to make sure it can properly handle
elements that have ANY caps but fail to add the overlay meta in
the allocation query.
This test verifies that textoverlay won't use the caps features even
knowing that the overlay meta is accepted when querying the downstream
caps because it also needs downstream to confirm by putting the meta
in the allocation query.
https://bugzilla.gnome.org/show_bug.cgi?id=735800
Make textoverlay negotiate caps more correctly.
1) Check what caps we received in the video-sink
2) If it already has the overlay meta -> use it directly
3) If it doesn't, textoverlay try adding the overlay meta and using it,
if downstream doesn't support it, just use what is received in the
video-sink
4) Check if the allocation query also supports the meta to enable
really using it
Before it wasn't really doing renegotiation of any kind, just
re-checking if it should use the overlay meta or not
Also had to update the caps in the test as memory:SystemMemory seems
to be required when you use a caps feature otherwise intersection/subset
checks will fail.
https://bugzilla.gnome.org/show_bug.cgi?id=733916
Set up a fakesink with a pad probe to replace the missing encoder to detect
if encoding was really required and only error out in this case. Otherwise
just let passthrough branch work.
This delays the error posting from the set_state function to when buffers
are really flowing. Unit test updated accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=650652
Make the MIKEY message and payload objects miniobjects so that they have
a GType and are refcounted.
We can reuse the dispose method to clear our payload objects.
Add some annotations.
Implement a copy function for the MIKEY message.
Fix the unit test.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=732589
With most decoder libraries, and especially when accessing codecs via
OpenMAX or similar APIs, we don't have the ability to properly related
the output buffers to a number of input samples. And could e.g. get
a fractional number of input buffers decoded at a time.
Previously this would in the end lead to an error message and stopped
playback. Change it to a warning message instead and try to handle it
gracefully. In theory the subclass can now get timestamp tracking
wrong if it completely misuses the API, but if on average it behaves
correct (and gst-omx and others do) it will continue to work properly.
Also add a test for the new behaviour.
We don't change it in the encoder yet as that requires more internal logic
changes AFAIU and I'm not aware of a case where this was a problem so far.
Aggregate buffering messages to only post the lower value
to avoid setting pipeline to playing while any multiqueue
is still buffering.
There are 3 scenarios where the entries should be removed from
the list:
1) When decodebin is set to READY
2) When an element posts a 100% buffering (already implemented)
3) When a multiqueue is removed from decodebin.
For item 3 we don't need to handle it because this should only
happen when either 1 is hapenning or when it is playing a
chained file, for which number 2 should have happened for the
previous stream to finish
https://bugzilla.gnome.org/show_bug.cgi?id=726423
playbin's buffer-size property takes a gint, not a gint64,
so only pass the bits expected to the vararg function, or
the terminator might not be found, leading to crashes, esp.
with negative numbers.
Spotted by Ravi Kiran K N <ravi.kiran@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=729617
The KEMAC payload actually needs to have subpayloads and the key should
go into the KEY_DATA subpayload. Add support for subpayloads and
implement the KEY_DATA payload.
Add some pointers to the conversion functions that allow us to add
encryption and decryption later.
MIKEY is defined in RFC 3830 and is used to exchange SRTP encryption
parameters between a sender and a receiver in a secure way.
This library implements a subset of the features, enough to implement
RFC 4567, using MIKEY in SDP and RTSP.
This provides an audio-filter and video-filter property to allow
applications to set filter elements/bins. The idea is that these will
e
applied if possible -- for non-raw sinks, the filters will be skipped.
If the application wishes to force the application of the filters, this
can be done by setting the new flag introduced on playsink -
GST_PLAY_FLAG_FORCE_FILTERS.
https://bugzilla.gnome.org/show_bug.cgi?id=679031
Storing a 64 bit integer in a 32 bit integer and then checking
for the error cases might not be ideal.
error: comparison of constant -9223372036854775808 with
expression of type 'guint' (aka 'unsigned int') is always true
Check that even if the subclass doesn't call set_output_format, the base
class should use upstream provided caps to fill the output caps that is
pushed before the gap event is forwarded, otherwise it ends again fixating
the rate and channels to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=722144
Adds a test that simulates a scenario where the first buffers after
a segment can't be decoded and the decoder asks for those frames
to be released. The videodecoder base class should make sure that
the events attached to those first buffers are pushed even if the
buffers aren't going to be.
https://bugzilla.gnome.org/show_bug.cgi?id=721835
Add a simple playback test that makes sure that video decoder pushes
buffers in the same order it receives and that it respects the
set timestamps and durations
This reverts commit 40fe5dcc84.
Using an idle probe here is not ideal because we'll send an EOS event
from the application thread... which might block for quite some time.
Go back to a block probe.
With the latest GLib, g_source_remove() complains about not finding
the timeout source with the given ID here, since it was already
destroyed by returning FALSE from the timeout callback. Also return
FALSE from the bus watches when we don't want to be called any more.
Wait for thread to exit before starting to free the
to_push list, otherwise thread might check the final
to_push->next node only after we've freed it already.
We already have internally the information on what type of stream (audio,
video, container, subtitle, ...) a certain caps is.
Instead of forcing callers to specify which CODEC_TAG category a certain
caps is, use that information to make a smart choice.
Does not break previous behaviour of gst_pb_utils_add_codec_description_to_tag_list
(if tag is specified it will be used, if caps is invalid it will be rejected,
...).
https://bugzilla.gnome.org/show_bug.cgi?id=702215
The function gst_rtp_buffer_get_payload can not be used in Python
because it lacks necessary length parameter. This patch adds a new
function, gst_rtp_buffer_get_payload_bytes, to use from Python
bindings. The new function has the advisory "Rename to:" annotation
so it can replace the gst_rtp_buffer_get_payload whan creating
bindings.
The function gst_rtp_buffer_get_extension_bytes is also added. It wraps
gst_rtp_buffer_get_extension_data which doesn't work in Python due to
incomplete annotation and because it returns the length as number of
32-bit words.
https://bugzilla.gnome.org/show_bug.cgi?id=698562
The array of factories should not contain a NULL element at the end
since the number of arguments is determined via G_N_ELEMENTS and the
NULL will be used as an argument to gst_element_factory_make() if
the other sources in the list weren't usable.
This allows getting a pad for a specific encoding profile, which can
be useful when there are several stream profiles of the same type.
Also update the encodebin unit tests so that we check that the returned
pad has the right caps.
https://bugzilla.gnome.org/show_bug.cgi?id=689845
This reverts commit adc9694ed7.
No need to restrict the conversion, we can handle interlace correctly. We
basically unpack each field, then convert each field to the target colorspace
and pack and interleave each field to the target format. We also disable any
fast path that can't deal with interlaced formats.
We were setting the query-func on the sink-pad, which got overwritten when
adding the new pad to collect pads. Instead register our query-func with the
collect pads object. This fixes filter caps. Add a test for it.
These override the variants without version suffix. Makes
'make check' work properly in environments that set the
suffixed variant for 1.0, such as jhbuild.
jhbuild already sets $GST_PLUGIN_PATH_1_0 which overrides $GST_PLUGIN_PATH. Set
both for the tests to see the locally built elements. Fixes 'make check' in
jhbuild.
A return value of FALSE here indicates that we don't have control-values. In
0.10 we were returning the default value of the property. Now we don't fill an
array with defaults in the ControlBinding, but leave it up to the element to
handle this case.
The behaviour is sensibly changed here. Instead of purely falling when a
preset is set on the #GstEncodingProfile, we now make sure that the
element that is plugged corresponds to the one specified as preset. Then,
if we have a preset_name, we use it, if it fails, we fail (we might rather
just keep working even without setting the element properties?)
+ Add tests that it behave correctly
