Commit graph

21887 commits

Author SHA1 Message Date
Michael Tretter
3d0c5dd58e kmssink: allow only supported resolutions
If the input buffers have a different size than the display, the frames
would have to be scaled or positioned on the display. The kmssink cannot
decide which behaviour would be appropriate for which use case.

In order to avoid scaling or positioning of the input stream, allow only
the supported connector resolutions in the sink caps.

https://bugzilla.gnome.org/show_bug.cgi?id=773473

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2016-11-30 20:13:55 +01:00
Michael Tretter
ca96cc6083 kmssink: set mode based on framebuffer configuration
Displays usually support multiple modes. Therefore, the kmssink should
not only support the preferred mode, but any mode that is supported by
the display.

https://bugzilla.gnome.org/show_bug.cgi?id=773473
2016-11-30 20:13:55 +01:00
Michael Tretter
f52baadd1e kmssink: add mode setting and base plane rendering
The kmssink assumed that the mode was already set by another application
and used an overlay plane for displaying the frames.

Use the preferred mode of the monitor and render to the base plane if
the crtc does not have a valid mode.

https://bugzilla.gnome.org/show_bug.cgi?id=773473

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2016-11-30 20:13:55 +01:00
Vivia Nikolaidou
e27fc343cc interlace: Writing field-order into the src caps
Writing top-field-first vs bottom-field-first into the src caps

https://bugzilla.gnome.org/show_bug.cgi?id=775409
2016-11-30 18:50:41 +02:00
Tim-Philipp Müller
7f0697c758 docs: add aggregator _get_type functions for signals + properties
https://bugzilla.gnome.org/show_bug.cgi?id=775379
2016-11-30 09:35:27 +00:00
Matthew Waters
1db88cbee7 glmemoryegl: remove spurious #if GST_GL_HAVE_DMABUF conditions
8c2118823b had some incorrect preprocessor
conditions that aren't actually needed.  Remove them.

https://bugzilla.gnome.org/show_bug.cgi?id=775248
2016-11-30 19:29:27 +11:00
Garima Gaur
aa08be43c7 gst: Fix caps leak
https://bugzilla.gnome.org/show_bug.cgi?id=775072
2016-11-30 09:59:08 +02:00
Philippe Renon
bf11338d6f opencv: check presence of required opencv_contrib headers
https://bugzilla.gnome.org/show_bug.cgi?id=772822
2016-11-29 21:26:19 -05:00
Philippe Renon
4664fc0b27 opencv: add opencv image format documentation
https://bugzilla.gnome.org/show_bug.cgi?id=774576
2016-11-29 21:21:49 -05:00
Philippe Renon
f6021e0016 opencv: account for sparse/padded formats when converting caps to cv image type
https://bugzilla.gnome.org/show_bug.cgi?id=774576
2016-11-29 21:21:49 -05:00
Nicolas Dufresne
cfc420bf4d opencvvideofilter: Don't parse the caps twice
The GstVideoFilter already provide caps parsed into GstVideoInfo. Avoid
doing that twice by splitting the helper.

https://bugzilla.gnome.org/show_bug.cgi?id=775288
2016-11-29 21:21:49 -05:00
Nicolas Dufresne
ed3877655d opencvfilter: Properly port to GstVideoFilter
This is a subblass of VideoFilter but yet does not use any of it's
features. This also fixes issue in case the incoming images have custom
strides as the VideoMeta is no longer ignored.

https://bugzilla.gnome.org/show_bug.cgi?id=775288
2016-11-29 21:21:49 -05:00
Philippe Normand
efbb6d2a13 mssdemux: fix meson build
Follow-up of 73721ad4e9.
Forgot to add the fragment parser in the meson build file.
2016-11-29 15:18:43 +01:00
Philippe Normand
73721ad4e9 mssdemux: improved live playback support
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.

https://bugzilla.gnome.org/show_bug.cgi?id=755036
2016-11-29 14:43:41 +01:00
Sebastian Dröge
5725bad218 decklink: Fix compiler warning
gstdecklink.cpp: In member function ‘virtual HRESULT GStreamerDecklinkInputCallback::VideoInputFrameArrived(IDeckLinkVideoInputFrame*, IDeckLinkAudioInputPacket*)’:
gstdecklink.cpp:766:34: error: ‘base_time’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
         capture_time -= base_time;
                                  ^
2016-11-29 15:35:09 +02:00
Anton Eliasson
03615a772a codecparsers: h264parse: improve documentation commentary
https://bugzilla.gnome.org/show_bug.cgi?id=775306
2016-11-29 10:34:16 +00:00
Anton Eliasson
0e8567a981 codecparsers: h264parse: docs spellcheck
Spell checks, correct capitalization and some rewording to
better fit the terms used in the H.264 spec.

https://bugzilla.gnome.org/show_bug.cgi?id=775306
2016-11-29 10:30:50 +00:00
Scott D Phillips
70ba84ee12 schro: #include math.h before schroedinger headers
The schroedinger headers unconditionally #define over C99's rint when
compiling with msvc which messes up the later inclusion of math.h.
Including math.h before schroedinger headers avoids getting syntax
errors in math.h

https://bugzilla.gnome.org/show_bug.cgi?id=775293
2016-11-29 09:49:05 +00:00
Nirbheek Chauhan
2160e0e2bd meson: Rework opencv plugin checks
a) Use get_pkgconfig_variable() to get the opencv prefix
b) Place an upper limit on the opencv version
c) Ensure that headers are available

(b) and (c) just copy what the configure.ac checks do.
2016-11-29 02:00:52 +05:30
Sebastian Dröge
57bb47f3f7 mpegtssection: Fix off-by-one in PMT parsing 2016-11-28 20:05:02 +02:00
Sebastian Dröge
911a6083c8 mpegtssection: Don't assert if the given section length is longer than the PMT actually is
Instead error out cleanly and just assert that we didn't read more than
the available data.
2016-11-28 19:53:46 +02:00
Sebastian Dröge
fdf1a57953 decklink: Correctly set top-field-first/bottom-field-first
First of all, all the HD and UHD modes should be top-field-first, as
also returned by the Decklink mode iterator API.

Then we should include the caps field "field-order" in the caps of the
source (not the sink due to negotiation problems with optional fields).

And finally we should set the TFF flag on interlaced buffers that are
top-field-first.
2016-11-28 17:19:26 +02:00
Sebastian Dröge
aec46143bb decklinksrc: Add property to drop frames that are marked as having no input signal
https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
331b2af050 decklinksrc: Add property to skip the first N seconds of capture
On some hardware the first few frames are bogus and not very useful.
Their timestamps are off, they have no timecodes, or there are spurious
black frames / no-signal frames. After a few frames this stabilizes
though.

https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
cf224a9990 decklinksrc: Set GAP flag on buffers that are captured without signal
https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
09dd64bb4f decklinksrc: Keep track of a window of capture/stream time mappings and calculate relationship
Based on this we calculate the actual capture time, which should get us
rid of any capturing jitter by averaging it out.

Also add a output-stream-time property which forces the elements to
output the stream time directly instead of doing any conversion to the
pipeline clock. Use with care.

https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
881a08671e decklinksrc: Stop using the "hardware" timestamps and directly use the pipeline clock
The hardware timestamps have no relation to when frames were produced,
only when frames arrived somewhere in the hardware. Especially there is
no guarantee that audio and video will have the same hardware timestamps
although they belong together, and even more important: the rate with
which the hardware timestamps increase is completely unrelated to the
rate with which the frames are captured!

As such we can as well use the pipeline clock directly and stop doing
complicated calculations. Also as a side effect this allows now running
without any pipeline clock, by directly making use of the stream times
as reported by the driver.

https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
423e4593aa rawparse: Whitespace cleanup 2016-11-28 14:26:17 +02:00
Tim-Philipp Müller
de4bb6e1d4 dataurisrc: remove plugin, moved to core
https://bugzilla.gnome.org/show_bug.cgi?id=774527
2016-11-28 11:26:50 +00:00
Sebastian Dröge
674efaadd9 m3u8: Mark uri_join() function as static
We don't really want to export this, especially not without any
namespacing. This can cause problems for static builds.
2016-11-28 10:49:23 +02:00
Sebastian Dröge
b0a6b5eac8 tsdemux: Post an error message on the bus if we activated a program without pads
Otherwise decodebin and applications are going to wait forever for pads
to appear, which is never going to happen.

Happens on this stream, which probably just need support for it added:
https://samples.mplayerhq.hu/3D/AVC_codec_in_m2ts_not_recognized/AVC_codec_not_recognized_right_video_sample.m2ts
2016-11-28 10:30:11 +02:00
Matthew Waters
024e92afe7 glwindow: move g_main_context_push/pop_thread_default() to run()
Calling g_main_context_push_thread and then g_main_context_invoke()
(used by gst_gl_window_send_message_async()) in the same thread will
cause the invoked function to run immediately instead of being delayed.

This had implications for the creation of the OpenGL context not waiting
until the main loop had completely started up and as a result would
sometimes deadlock in short create/destroy scenarios.

https://bugzilla.gnome.org/show_bug.cgi?id=775171
2016-11-28 14:27:03 +11:00
Matthew Waters
25fbc6d877 glcontext: fix race between creation/shutdown
626bcccff9 removed some locks that
allowed the main loop quit to occur before the context was fully
created.

2776cef25d attempted to readd them but
missed the scop of the quit() call.

Also remove the use of g_thread_join() as that's not safe to use when
it's possible to lose the last reference from the GL thread.

https://bugzilla.gnome.org/show_bug.cgi?id=775171
2016-11-28 14:27:03 +11:00
Sebastian Dröge
2f87392ee7 rawbaseparse: Fix output buffer size trimming
For frame->buffer, baseparse is doing that automatically for us. For
frame->output_buffer it doesn't and assumes that the subclass is already
doing that. Consistency!
2016-11-27 12:40:53 +02:00
Sebastian Dröge
eef53ef6ed dash: Fix stripping of space at the beginning/end of durations
The way how strchr() was called here, it could easily read after the end
of the string. Use g_ascii_isspace() instead.

Detected by asan in the unit test.
2016-11-27 12:20:11 +02:00
Sebastian Dröge
7488a8fb35 opencv: Make the OpenCV plugin optional in the meson build 2016-11-27 11:56:18 +02:00
Sebastian Dröge
5a6b121d5b rawparse: Properly align raw audio/video output buffers
That is, aligned to the basic type for audio and to 32 bytes for video.
Fixes crashes if the raw buffers are passed to SIMD processing functions.

https://bugzilla.gnome.org/show_bug.cgi?id=774428
2016-11-27 11:45:33 +02:00
Luis de Bethencourt
de99cf0de1 opencv: Enable in meson build
https://bugzilla.gnome.org/show_bug.cgi?id=774223
2016-11-26 17:55:23 +00:00
Tim-Philipp Müller
555c4eb1b2 common: use https protocol for common submodule
https://bugzilla.gnome.org/show_bug.cgi?id=775110
2016-11-26 11:23:39 +00:00
Sebastian Dröge
88e060743a mxfdemux: Post an error message if we got EOS before having any source pads
Otherwise, sending an EOS event has no effect and the application waits
forever for something to happen.
2016-11-26 12:28:57 +02:00
Sebastian Dröge
55043aff12 h264parse: Fix indentation 2016-11-26 12:16:58 +02:00
Sebastian Dröge
cb4ccecc97 h265parse: Fix assertion when encountering an invalid NALU
Error out properly instead.

https://bugzilla.gnome.org/show_bug.cgi?id=775130
2016-11-26 12:16:58 +02:00
Sebastian Dröge
47bf425cba h264parse: Fix assertion when encountering an invalid NALU
Error out properly instead.

https://bugzilla.gnome.org/show_bug.cgi?id=775130
2016-11-26 12:16:58 +02:00
Edward Hervey
d58f668ece mpegtssection: Add more section size checks
The smallest section ever needs to be at least 3 bytes (i.e. just the short
header).
Non-short headers need to be at least 11 bytes long (3 for the minimum header,
5 for the non-short header, and 4 for the CRC).

https://bugzilla.gnome.org/show_bug.cgi?id=775048
2016-11-26 10:46:08 +01:00
Edward Hervey
7b12593cce mpegtssection: Fix PAT parsing
Use the estimated number of programs for parsing. Avoids over-reading.

https://bugzilla.gnome.org/show_bug.cgi?id=775120
2016-11-26 10:45:52 +01:00
Edward Hervey
9053a01e72 hlsdemux: Handle GST_SEEK_TYPE_NONE seek
When one is only updating the "stop" position (i.e. non-flushing seek,
with GST_SEEK_TYPE_NONE on the "start" (or stop in reverse) position),
we only need to store those values instead of moving the current position.

https://bugzilla.gnome.org/show_bug.cgi?id=775127
2016-11-26 10:45:52 +01:00
Sebastian Dröge
9b89f58cae ext: Fix various compiler warnings with clang
wldisplay.c:179:15: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
  if (shm_fmt < 0)
      ~~~~~~~ ^ ~

gstsegmentation.cpp:419:40: error: implicit conversion from 'int' to 'char' changes value from 255 to -1 [-Werror,-Wconstant-conversion]
          filter->cvFG->imageData[j] = 255;
                                     ~ ^~~

https://bugzilla.gnome.org/show_bug.cgi?id=775112
2016-11-25 23:47:15 +02:00
Sebastian Dröge
939528e542 gl/x11: Remove unused static function 2016-11-25 23:44:25 +02:00
Sebastian Dröge
d3b45a145f mxfdemux: Fix up another size check and prevent allocating too much memory 2016-11-25 16:46:45 +02:00
Sebastian Dröge
31a2f2d5a1 mxfdemux: Handle zero-sized KLV items better and don't assert on them 2016-11-25 15:59:44 +02:00