Pipeline serialisation to and from XML is horribly broken for all
but the most simple use cases, and will likely never be fixed.
Make sure everyone playing around with these tools is aware of
this, to avoid frustration. See countless bug reports in bugzilla.
Fixes bug #622685.
A pad is 'negotiable' when its container element is in a state greater
than GST_STATE_READY
API:gst_pad_is_negotiable
API:gst_pad_set_negotiable
API:GST_PAD_NEGOTIABLE
https://bugzilla.gnome.org/show_bug.cgi?id=618644
Just truncate and then fixate. We check for empty caps in the begin and a
fixate-func that empties a caps would be broken. It also helps lazy caps impl.
in bug 618853 by avoiding the gst_caps_get_size().
We need to check the pad caps on the srcpad as well as on the sinkpad. Revert
this commit as it removes the check on the srcpad and can leave the srcpad
unnegotiated (or negotiated with wrong caps)
This reverts commit 07dc1e5b49.
This check is not necesarry as we are not negotiating anymore. And it can
be wrong if upstream can't produce this caps anymore, but downstream can
process them fine.
When we unblock a pad with the same user_data, the destroy callback is not
called. This leads to refcounting leaks that cannot be avoided. Instead always
call the destroy notify whenever we install a new pad block.
In particular, this fixes a nasty pad leak in decodebin2.
Also update the unit test to have more accurate comments and test the required
behaviour.
The default gst_pad_fixate_caps() previously would only fixate each individual
struct. In case there are multiple structs, the resulting caps would still not
be fixed. In the spirit of how individual structs are fixated, this patch
changes gst_pad_fixate_caps() to remove all but the first struct.
Fixes#595886
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
Post the structure change messages on the sinkpads of the elements. This allows
us to catch unlinked pads earlier without ending up with inconsistent element
degrees.
The internal links function is deprecated since some time and
there already were GST_REMOVE_DEPRECATED markers in the source file,
now add them to the header too.
Fixes bug #592209.
This makes the generated code faster since:
* It won't have to read an undirect value (which will most likely be
outside of the L1/L2 cache)
* We know that value never changes (the compiler has no clue that it doesn't).
Move MT safety to main description (it does not belong to Return: or Since:
statement). Add a few missing return docs. Downgrade a normal comment froma doc
comment. Fix a doc header to only contain symbol name.
Reuse buffer code for bufferlists. Not sure if this measurably impacts performance
for the simple buffer case, if it does after doing some benchmarks, we can
decouple it later.
Fixes#572285
Post a stream-status message indicating that a new task was created so that the
application has a chance to change the properties of the task.
Fix unit test to take into account the new ref of the message.
Move the gst_pad_can_link() implementation from gstutils to gstpad and use
gst_pad_link_prepare() to make it work correctly and also check the caps.
Make the broken implementation in gstutils static.
Small cleanups in the _get_fixed_caps() function.
Fixes#575682.
Keep track of when a new callback is installed in the callback and call the new
callback in that case.
Add unit test for checking pad blocking.
Fixes#573823.
When de/activating a pad in pull mode the pad needs to de/activate the
peer pad it is connected to, failure to be able to do this in activation mode
is an error.
However if there is no peerpad, we can still deactivate the pad correctly and
assume the application will deactivate the unlinked peer pad eventually.
Fixes#574163.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_configure_src):
When we use gst_pad_alloc_buffer() without wanting to set the caps we
also don't need to check if the caps are compatible because the caller
presumably is going to perform its own custom checks. Fixes some cases
where basetransform elements would error out when it was not needed.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_range), (gst_pad_pull_range):
Revert a patch from 21 months ago that broke caps negotiation in pull
mode. Basically, having a buffer pass over a pad will trigger the
setcaps function when caps change, just like in push mode.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes#510354.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked):
Original patch by : Simon Descaries
Fix small refount leak in caps compatibility check.
Fixes#551676.
Original commit message from CVS:
* gst/gstpad.c: (add_unref_pad_to_list),
(gst_pad_get_internal_links_default):
Add fallback when calling the deprecated function on an element that
implements the new internal_link handler.
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* docs/gst/gstreamer-sections.txt:
* win32/common/libgstreamer.def:
* gst/gstpad.c: (gst_pad_init),
(gst_pad_set_iterate_internal_links_function),
(int_link_iter_data_free), (iterate_pad),
(gst_pad_iterate_internal_links_default),
(gst_pad_iterate_internal_links), (gst_pad_get_internal_links):
* gst/gstpad.h:
Add threadsafe replacement functions for getting internal links of an
element. Deprecate the old internal links functions.
API:GstPad::gst_pad_set_iterate_internal_links_function()
API:GstPad::GstPadIterIntLinkFunction
API:GstPad::gst_pad_iterate_internal_links()
API:GstPad::gst_pad_iterate_internal_links_default()
* gst/gstghostpad.c: (gst_proxy_pad_do_iterate_internal_links),
(gst_proxy_pad_init):
Implement threadsafe internal links.
* tests/check/elements/tee.c: (GST_START_TEST), (tee_suite):
Unit test for internal links on tee. See #549504.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default):
Make the internal links function less thread-unsafe and add some
comments, dunno why.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_acceptcaps_default),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full):
Remove silly redundant debug.
Add some more debug info.
Clarify the docs regarding new caps received from pad_alloc.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Only sanity-check the buffer size if requested_caps == buffer_caps
(ie. don't take pad caps into account, they're not relevant here)
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_event_default_dispatch):
The default event function on a sinkpad should return TRUE when
there are no internal links but should collect the return values from
the internal links otherwise.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Move size sanity check to the right place: downstream may return
a buffer with a smaller size if the buffer caps are different than
the requested ones, as may happen when doing reverse negotiation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_buffer_alloc_unchecked):
Add sanity check to make sure we don't get smaller buffers
than requested (and fallback to normal buffer alloc if we do).
Original commit message from CVS:
* gst/gstconfig.h.in:
Add 'id' for example.
* gst/gstpad.c:
* gst/gstutils.c:
* plugins/elements/gstfdsink.c:
Link to signals. Doc and comment fixes.
Original commit message from CVS:
* gst/gstpad.c:
* tests/check/gst/gstpad.c:
Be sure that we have a new copy of the caps and not
reffed caps from a template
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_dispose):
Really unlink the peer pad instead of setting the peer pointer to NULL
when we dispose the pad.
This correctly calls the unlink functions and makes sure that the peer
does not have a handle to invalid memory. See #504671.
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add testsuite for above case.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_peer_query):
* gst/gstpad.h:
Add function to perform a query on the peer of a pad.
API: gst_pad_peer_query()
Original commit message from CVS:
* docs/design/part-TODO.txt:
Add some more TODO items
* gst/gstbin.c: (find_message), (gst_bin_change_state_func):
Improve debugging.
* gst/gstcaps.c: (gst_caps_intersect):
Optimize trivial intersection case between identical caps pointers.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func):
* gst/gstpad.c:
Fix spelling and grammar mistakes.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_push):
Show the caps change in the log to help spotting the case of not
exactly matching caps.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_caps_unlocked),
(gst_pad_acceptcaps_default), (gst_pad_configure_sink),
(gst_pad_configure_src):
Added simple version of improved caps checking. It was previously
assumed that a setcaps function would check the validity of the caps but
people prefer us to check caps against the template automatically.
Fixes#421543.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't get empty paths on the PATH variables
* gst/gstpad.c (gst_pad_is_active, gst_pad_set_blocked_async):
Don't format for the uncommon terminal width of 84 characters.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full),
(gst_pad_chain_unchecked), (gst_pad_push):
Revert last commit. This needs some more thoughts.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps), (gst_pad_alloc_buffer_full),
(gst_pad_chain_unchecked), (gst_pad_push):
Check in set_caps if the caps are compatible with the pad and remove
two functions that are redundant now. Fixes#421543.
Original commit message from CVS:
Patch by: <syrjala at sci dot fi>
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_send_event):
Fix possible deadlock if pad eventfunc is not specified. Fixes#421177.
Improve debugging.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default),
(gst_pad_dispatcher):
Improve debugging of default pad dispatcher and query functions.
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Allow
getrange() to return buffers with other caps, while we fix
demuxers and typefind, or otherwise change part-negotiation.txt.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_activate_pull): Refuse to activate unlinked
sink pads in pull mode. In addition to being correct, fixes
filesrc ! decodebin ! identity ! fakesink.
(gst_pad_get_range, gst_pad_pull_range): Don't call
gst_pad_set_caps() if the caps changes; instead error out with
GST_FLOW_NOT_NEGOTIATED, as discussed in part-negotiation.txt.
Original commit message from CVS:
2007-01-10 Andy Wingo <wingo@pobox.com>
* docs/design/part-negotiation.txt: Update with, um, one way that
pull-mode negotiation might work?
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_get_allowed_caps): Remove the restriction
that the pad must be a src pad; makes sense to call it the other
way in pull mode, and the logic is symmetric anyway.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Set caps
on the pads if necessary, as in push()/chain(). Update docs.
Shouldn't affect existing pull() usage as it is currently only
being used on buffers without caps.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_add_pad):
* gst/gstghostpad.c: (gst_ghost_pad_new_full):
* gst/gstpad.c: (gst_pad_init):
Set pads to FLUSHING when they are created. Check, warn and fix when a
demuxer adds an inactive pad to itself when running. Fixes#339326.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c:
Fix documentation for gst_pad_dispatcher. Fixes#374475.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c: (gst_pad_init), (pre_activate),
(gst_pad_set_blocked_async), (gst_pad_acceptcaps_default),
(gst_pad_accept_caps), (handle_pad_block), (gst_pad_push_event):
Some small cleanups. Improve debugging.
* gst/gstpad.h:
Signal all waiting threads with a broadcast instead of just one.
Fixes#369942.
Original commit message from CVS:
* docs/design/part-events.txt:
Update some docs.
* docs/design/part-block.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
Revert BLOCKING patch, it tries to be smart without really having a
clear idea what or how. So, now we discard all FLUSHING events again on
a blocking pad. Should fix gnonlin again.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
Patch by: Sebastien Cote <sebas642 at yahoo dot ca>
* gst/gstpad.c: (gst_pad_get_caps_unlocked),
(gst_pad_save_thyself):
Update some docs.
Write pad direction in XML output. Fixes#345496.
Original commit message from CVS:
* docs/design/part-block.txt:
Further explain the use of flushing on blocked pads.
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
* gst/gstpad.h:
Added new GstPadFlag : GST_PAD_BLOCKING.
Adds the notion of pads really blocking, which enables to properly
handle FLUSH_START/FLUSH_STOP events on blocked pads.
Fixes#358999
API: gst_pad_is_blocking()
API: GST_PAD_IS_BLOCKING() macro
API: GST_PAD_BLOCKING GstPadFlag
Original commit message from CVS:
* gst/gstinfo.c: (_gst_debug_nameof_funcptr):
Fix locking order, handle NULL function values properly.
* gst/gstinfo.h:
Fix docs.
* gst/gstpad.c: (gst_pad_buffer_alloc_unchecked):
Initialised variable before using it and fix debug statement to
print the address of the function rather than the address of the
variable on the stack holding the address of the function.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_start_task), (gst_pad_pause_task),
(gst_pad_stop_task):
Improve debugging for task functions.
* gst/gsttask.c: (gst_task_func), (gst_task_set_lock),
(gst_task_start), (gst_task_pause), (gst_task_join):
Make sure that the task function started and finished after a
join().
Don't try to push the task function on the threadpool multiple
times.
Improve the g_warning message with some useful suggestions
about how to fix the problem.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gsttask.c: (gst_task_join):
Small doc updates.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_stop_task):
When pad (de)activation failed for some reason, restore the old
activation mode and set the pad to flushing instead of assuming the
pad is deactivated.
If the _task_join() failed, reinstall the task on the pad so that it can
be stopped later and return an error.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_dispose),
(gst_pad_get_property), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_set_blocked_async),
(gst_pad_set_activate_function),
(gst_pad_set_activatepull_function),
(gst_pad_set_activatepush_function), (gst_pad_set_chain_function),
(gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_internal_link_function), (gst_pad_set_link_function),
(gst_pad_set_unlink_function), (gst_pad_set_getcaps_function),
(gst_pad_set_acceptcaps_function),
(gst_pad_set_fixatecaps_function), (gst_pad_set_setcaps_function),
(gst_pad_set_bufferalloc_function), (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_get_caps),
(gst_pad_peer_get_caps), (gst_pad_accept_caps),
(gst_pad_peer_accept_caps), (gst_pad_set_caps),
(gst_pad_configure_sink), (gst_pad_configure_src),
(gst_pad_get_allowed_caps), (gst_pad_get_negotiated_caps),
(gst_pad_buffer_alloc_unchecked), (gst_pad_alloc_buffer_full),
(gst_pad_query), (gst_pad_load_and_link), (handle_pad_block),
(gst_pad_chain_unchecked), (gst_pad_push), (gst_pad_get_range),
(gst_pad_send_event):
Use _DEBUG_OBJECT when it makes sense.
Protect GST_PAD_CAPS with the OBJECT_LOCK.
Small cleanups and code reflows.
Avoid caps refcounting in _accept_caps.
Refactor alloc_buffer so that the code performed on the peer is in a
separate function. Also if the pad does not implement a buffer alloc
function, we should still check if the pad is flushing before falling
back to the default allocator.
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_activate_pull),
(gst_pad_activate_push):
Use some more macros where it makes sense.
Allow pad mode switching instead of asserting. When a pad
is activated in one mode and we activate it in another,
deactivate it first before activating it in a different mode.
Fixes#329198.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_chain_unchecked), (gst_pad_chain),
(gst_pad_push), (gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
* gst/gstpad.h:
Lots of comments and docs added to the pad functions.
Flesh out the expected behaviour of the get_range() functions.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_push):
Restore acceptcaps checking behaviour now that good plugins have
been released.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_link):
Must set peer pads before calling the link function, otherwise
a task started from a link function might get a flow-not-linked
result when trying to push because the other thread where the
linking happens hasn't had a chance to set the peers yet. This
might happen for example when a queue gets linked to a downstream
element, as queue starts a streaming task when its source pad
gets linked. Happens in real life when playing back flac/musepack
files in playbin (#332390).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_property):
Use g_value_get_object() instead of g_value_dup_gst_object(),
to avoid double-reffing the pad template (which we then sink,
so this worked previously if (and only if) the pad template
was floating.
* gst/gstpadtemplate.c: (gst_pad_template_init),
(gst_pad_template_pad_created):
Never return floating references to pad templates, create
them as initially-sunken.
Document an extra function (and make this stop sinking our
pad template, since that is now guaranteed to do nothing,
since we created it sunken).
* gst/gstghostpad.c:
Fix docs typo.
Original commit message from CVS:
2006-04-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_blocked_async): More debug.
* libs/gst/base/gstbasetransform.c
(gst_base_transform_sink_eventfunc): When resetting our segment on
FLUSH_STOP, also update the flag saying we haven't seen a
newsegment.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_alloc_buffer_full),
(gst_pad_push):
Don't leak buffers, caps and pads on negotiation errors.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_alloc_buffer_full),
(gst_pad_push):
Don't pound the cpu to pieces by checking get_caps when accept_caps
is called with the same caps as the pad already has.
Use GST_DEBUG_OBJECT when outputting caps change information.
Original commit message from CVS:
* gst/gstbuffer.h:
Documentation fix.
* gst/gstpad.c: (gst_pad_init), (gst_pad_acceptcaps_default),
(gst_pad_accept_caps), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_chain), (gst_pad_push):
Make the default acceptcaps behaviour be to check the requested
caps against the gst_pad_get_caps output.
Ensure that gst_pad_accept_caps is used to check caps when a pad
doesn't have a setcaps function, so that pads automatically refuse
caps that they don't allow in their pad template. (Fixes#332986)
When a buffer with attached caps is pushed, ensure that the source
pad receives those caps even if the element didn't call
gst_pad_set_caps first.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_blocked_async):
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe): Make those function act on the
ghostpad target when it's a ghostpad. (Closes#331727)
------------------------------------------------------
Original commit message from CVS:
2006-02-19 Julien MOUTTE <julien@moutte.net>
* gst/gstinfo.h: Add GST_STR_NULL to the second string.
* gst/gstpad.c: (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_getcaps_function): GST_DEBUG_PAD_NAME evaluates to
2 strings. You can't use the STR_NULL macro on that.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_getcaps_function)
* gst/parse/grammar.y: (gst_parse_found_pad), (gst_parse_perform_delayed_link)
Fixed NULL pointer used in GST_CAT_DEBUG using GST_STR_NULL macro
So now, we can use --gst-debug-level=5 on Windows
* win32/common/libgstcontroller.def:
Added export of gst_controller_init
* win32/vs6/libgstcontroller.dsp:
Fixed Release post build configuration
Original commit message from CVS:
* gst/gstcaps.c:
Clarify behaviour of _is_equal() when passing NULL parameters.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_set_caps):
Cleanups. Don't unref NULL caps.
When setting the same caps, protect caps of the pad with
proper lock.
Use full functionality of _is_equal() when comparing caps.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gst.h: Include glib-compat.h.
* gst/glib-compat.h: Add G_GNUC_NULL_TERMINATED.
* gst/glib-compat.c: Include the public and the private header.
* gst/glib-compat-private.h: Copied here from glib-compat.h.
* gst/gstvalue.c:
* gst/gstpad.c:
* gst/gstregistryxml.c: s/glib-compat/glib-compat-private/.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_send_event): Doc more. Take stream lock on
behalf of event function if necessary. It should no longer be
necessary to take the stream lock in pad's event functions. Fixes
#320299.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_new_from_static_template):
* gst/gstpad.h:
add gst_pad_new_from_static_template functions
* gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
* gst/elements/gsttee.c: (gst_tee_init):
and use them
Original commit message from CVS:
* gst/glib-compat.c: (g_value_dup_gst_object):
* gst/glib-compat.h:
* gst/gstpad.c: (gst_pad_set_property):
use gst_object_ref when setting the pad template; this will
trigger the pad template leaks on GLib 2.6 and the slaves
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/gstpad.c: (gst_pad_get_property):
GST_PAD_PAD_TEMPLATE(pad) gets the pad template, while
GST_PAD_TEMPLATE(pad) does a cast. We want the former here.
(#321452)
Original commit message from CVS:
2005-11-14 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_active): Change docs; parent's
STATE_LOCK not necessary. Fixes#311489.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_caps), (gst_pad_peer_get_caps):
While checking the flag for reentrancy in the gstcaps function
is nice to detect recursive invocations, it also makes it
impossible to call getcaps from multiple threads, which must be
possible. So, checking for recursive calls has to go.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added check for bug #317341
* gst/gstbuffer.c:
* gst/gstbuffer.h:
Some more spiffifying.
* gst/gstghostpad.c: (gst_ghost_pad_do_link):
Call peer linkfunction if we are a source pad. Totally fixes
#317341
* gst/gstpad.c:
Update docs, source pads should call the peer linkfunction
so they can atomically perform the pad link.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_blocked_async):
comparing a flag and a gboolean rarely returns coherent results...
Added two characters (!!) to make that work correctly.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer), (handle_pad_block),
(gst_pad_push), (gst_pad_push_event):
Unlock blocked pads when they are flushed.
Original commit message from CVS:
2005-10-16 Julien MOUTTE <julien@moutte.net>
* gst/gstcaps.c: (gst_caps_intersect): Fix a bad bug with a
simple
fix. Because of unsigned ints, caps intersection was going nuts
and
trying to access structures with G_MAXUINT index. That fixes
videotestsrc ! ffmpegcolorspace ! fakesink
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked): logs
consistency.
Original commit message from CVS:
2005-10-12 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_pause_task): Actually return FALSE if
there is no task. Shouldn't affect any code, as nothing in our
plugins checks this return value.
(gst_pad_stop_task): Also take the stream lock if the pad has no
task. Docs updated.
Original commit message from CVS:
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_activate_pull), (gst_pad_activate_push):
Cleanup activation code. Reset old state if
activation failed.
Original commit message from CVS:
2005-10-11 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (pre_activate): Renamed from pre_activate_switch,
take the mode we're going to as an arg. Go head and set the mode
and flushing flags now, so that if the activate function starts a
thread all the flags will be in the right state.
(post_activate): Renamed also. Just handle making sure streaming
finishes for the deactivation case, and setting the deactivated
mode.
(gst_pad_set_active): Complain loudly if deactivation fails.
(gst_pad_activate_pull): Adapt to pre/post_activate changes.
(gst_pad_activate_push): Adapt to pre/post_activate changes,
remove the terrible hack.
Original commit message from CVS:
* docs/design/part-states.txt:
Some more docs.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_recalc_state),
(gst_bin_change_state_func), (bin_bus_handler):
Doc updates. Don't distribute the same clock over and over again.
* gst/gstclock.c:
* gst/gstclock.h:
Doc updates.
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark),
(gst_pad_get_type), (gst_pad_push), (gst_pad_push_event),
(gst_pad_send_event):
* gst/gstpad.h:
Make probe emission threadsafe again.
Register quarks and move _get_name() from utils.
Doc updates.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_change_state), (gst_pipeline_provide_clock_func):
Only redistribute the clock of it changed.
* gst/gstsystemclock.h:
Doc updates.
* gst/gstutils.c:
* gst/gstutils.h:
Moved the _flow_get_name() to GstPad.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_event_default_dispatch):
give events a chance to be handled by event probes when the pad
is not linked
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_push), (gst_pad_push_event):
emit have-data before checking for peers. This allows
for probe handlers to connect elements. This helps autopluggers.
* check/gst/gstpad.c: (GST_START_TEST), (_probe_handler),
(gst_pad_suite):
add six checks, linked/unlinked with no/true/false probe
Original commit message from CVS:
2005-10-03 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_activate_push): There is a race condition
whereby calling a pad's activatepush() function can start a thread
that starts to push or pull before the pad gets the FLUSHING flag
unset. Hack around it by holding the stream lock until the flag is
set. Need to replace this with a proper solution. Together with
the ghost pad fixes, this fixes mp3 playing/tagreading.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_change_state):
Only error is an error.
* gst/gstbin.c: (gst_bin_change_state):
Better debugging.
* gst/gstpad.c: (gst_pad_alloc_buffer), (gst_pad_chain):
Also call pad_block in pad alloc.
* gst/gstutils.c: (gst_flow_get_name):
Better debugging.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_change_state):
Make state change function use 3 queues again, we were
adding elements in the wrong order.
* gst/gstghostpad.c: (gst_ghost_pad_do_unlink):
Some debug info,
* gst/gstpad.c: (gst_pad_dispose):
Added some debug info first.
Original commit message from CVS:
* common/gtk-doc.mak:
don't fail on building XML, FC4 slave shows a bunch of doc
missing bits that I don't get
* gst/gstpad.c:
* gst/gstpipeline.c:
* gst/gststructure.c:
some doc updates
Original commit message from CVS:
* docs/README:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_chain):
* gst/gstpluginfeature.c:
* gst/gstutils.c:
various doc updates
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
change an assert into an error until it gets fixed properly
Original commit message from CVS:
2005-09-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstutils.c: New file.
(test_buffer_probe_n_times): A simple buffer probe test. More to
come, foolios.
* gst/gstutils.c (gst_pad_add_buffer_probe): Connect to
have-data::buffer, not have-data.
(gst_pad_add_event_probe): Likewise for have-data::event.
(gst_pad_add_data_probe): More docs. The part about 'resolving the
peer' isn't quite right yet though.
(gst_pad_remove_buffer_probe, gst_pad_remove_event_probe)
(gst_pad_remove_data_probe): Change to take the guint handler_id
as their arg, not the function+data, which is more glib-like.
* gst/gstpad.c (gst_pad_emit_have_data_signal): Add a detail to
the signal emission to indicate if the data is a buffer or an
event.
(gst_pad_get_type): Initialize buffer and event quarks.
(gst_pad_class_init): have-data is now a detailed signal, yes it
is.
Original commit message from CVS:
* check/gst/gstpad.c: (GST_START_TEST), (name_is_valid),
(gst_pad_suite):
add tests for valid pad naming
* gst/check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func):
add ASSERT_WARNING
remove printing of code, it is fragile when the code contains
% and the line number is enough info
* gst/check/gstcheck.h:
* gst/gstpad.c: (gst_pad_template_new):
fix memleaks
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer):
Catch misbehaving pad_alloc functions that don't
set up caps and do it for them.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_pad_buffer_alloc):
Add comment.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Make state change function thread-safe.
* gst/gstpad.c: (gst_pad_alloc_buffer):
Set offset on generic buffer allocated by fallback.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/gstelement.sgml:
* gst/gstpad.c:
* libs/gst/controller/gst-controller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_new),
(gst_controller_find_controlled_property):
run the wingo-magic script against the docs
Original commit message from CVS:
* gst/base/gstadapter.c: (gst_adapter_flush):
Flushing out 0 bytes is ok for this function.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
no newsegment gives a warning and sets the start/stop to
invalid.
* gst/base/gstbasetransform.c: (gst_base_transform_change_state),
(gst_base_transform_set_passthrough):
Some debug info.
* gst/gstminiobject.c: (gst_mini_object_ref):
Check refcount here too.
* gst/gstpad.c: (gst_pad_init):
Pads are initially flushing and refusing data.
* gst/gstutils.c: (gst_element_link_pads_filtered):
When adding a capsfilter element make sure it has the
same state as the parent bin.
Original commit message from CVS:
* gst/gstbin.h:
removed ';' from the end of macro defs
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/.cvsignore:
* gst/gstbus.h:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_set_state), (activate_pads),
(gst_element_save_thyself):
* gst/gstevent.c: (gst_event_new_newsegment):
* gst/gstevent.h:
* gst/gstiterator.c:
* gst/gstiterator.h:
* gst/gstpad.c:
* gst/gstprobe.h:
* gst/gstutils.c: (gst_pad_query_convert):
* gst/gstutils.h:
fixed parameter name mismatches between source, header and docs
added some more docs, resolved the last batch of unused elements in
docs (now someone needs to doc them)
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Make sure all tasks are stopped.
* check/gst/gstbin.c: (GST_START_TEST):
Unref after usage for proper valgrinding.
* gst/gstpad.c: (gst_pad_finalize), (gst_pad_stop_task):
Really wait for the task to stop before destroying the
mutex.
* gst/gstqueue.c: (gst_queue_sink_activate_push),
(gst_queue_src_activate_push):
Small cleanups. Don't stop the task when we did not start
it.
* gst/gsttask.c: (gst_task_get_type), (gst_task_init),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause),
(gst_task_join):
* gst/gsttask.h:
Protect the stream lock with the object lock.
Disallow setting the stream lock when running.
Add cleanup_all to wait for the threadpool to finish.
Remove code to autoallocate a mutex if none was provided.
Add _join() to wait for a task to stop.
Protect the thread pool with a global lock.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_new_and_alloc):
some debugging
* gst/gstcaps.h:
whitespace fixes
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_alloc_buffer):
more debugging
* gst/gststructure.c: (gst_caps_structure_fixate_field_boolean):
* gst/gststructure.h:
add a fixate function for booleans; add a FIXME that these func
names should probably be gst_structure_fixate_*
Original commit message from CVS:
* check/Makefile.am:
clean up environment for when registry gets built versus
when actual tests are run; valgrind seems to not report
leaks if GST_PLUGIN_PATH is set to some specific values
* check/gst/gstbin.c: (GST_START_TEST):
add more refcounting checks; maybe this exposes a
preroll lock bug ?
* common/check.mak:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/check/gstcheck.h:
* gst/gstbin.c: (bin_element_is_semi_sink), (gst_bin_get_state),
(gst_bin_change_state):
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_chain):
add/fix debugging/whitespace
Original commit message from CVS:
* check/Makefile.am:
set GST_TOOLS_DIR
* gst/check/gstcheck.c: (gst_check_message_error):
* gst/check/gstcheck.h:
add a fail_unless_equals_int
add fail_unless for error messages
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Small update.
* gst/gstbin.c: (unlink_pads), (gst_bin_add_func),
(gst_bin_remove_func):
Unlinking pads while holding the bin LOCK is not a good
idea.
* gst/gstpad.c: (gst_pad_class_init),
(gst_pad_link_check_hierarchy), (gst_pad_get_caps_unlocked),
(gst_pad_accept_caps), (gst_pad_set_caps), (gst_pad_send_event):
No prob setting template after creating the pad.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added some more tests for wrong hierarchy
* docs/design/part-overview.txt:
Some updates.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_dispose):
Cleanups.
* gst/gstelement.c: (gst_element_remove_pad), (gst_element_seek),
(gst_element_dispose):
Some more cleanups.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_check_hierarchy), (gst_pad_link_prepare),
(gst_pad_get_caps_unlocked), (gst_pad_accept_caps),
(gst_pad_set_caps), (gst_pad_send_event):
Check for correct hierarchy when linking pads. Moving to
strict requirement for ghostpads when linking elements in
different bins.
* gst/gstpad.h:
Clean ups. Added WRONG_HIERARCHY return value.
Original commit message from CVS:
* gst/gstpad.c: (fixate_value), (gst_pad_default_fixate),
(gst_pad_fixate_caps):
Implement default fixation once again, so that gst_pad_fixate()
actually does anything at all. This probably needs to be some
sort of a last resort, and use profile-based fixation first, but
since that doesn't exist yet, this is the best we have. Fixes
visualization in Totem.
Original commit message from CVS:
Removed plugable schedulers.
Removed Scheduler/Manager from elements.
Removed gsttypes.h, rearranged includes.
Removed dependency pad<->element, element<>pipeline, and
various others, fix includes.
implement gst_pad_get_parent() with gst_object_get_parent()
Make GstTask sefcontained.
Fix _get_state() on GstBin, it did not return ASYNC with a 0
timeout.
Fix endless loop in iterator_fold_with_resync.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Added more debug info in the negotiate process.
* gst/gstmessage.h:
Prepare for segment playback.
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_set_caps):
Better debugging.
* gst/gstutils.c:
Some more docs.
* tools/gst-launch.c: (main):
NULL pipeline on errors.
Original commit message from CVS:
* check/gst/gstpad.c:
* check/gstcheck.c:
* gst/gstpad.c: (gst_pad_get_internal_links_default):
if pad has no parent, return NULL as list of internal links
Original commit message from CVS:
2005-07-05 Andy Wingo <wingo@pobox.com>
* check/gst/gstbus.c (pound_bus_with_messages):
* check/gst/gstmessage.c (START_TEST):
* check/pipelines/simple_launch_lines.c (got_handoff): Application
message API change.
* gst/base/gstbasetransform.c (gst_base_transform_setcaps): More
logic weaks here: always run transform_caps, trying passthrough
operation only if the original caps intersects with the transform.
* gst/gstpad.c (gst_pad_link_check_compatible_unlocked): Debug
source and sink caps.
* gst/base/gstbasetransform.c (gst_base_transform_getcaps):
Intersect the peer caps with the pad template before going into
transform_caps.
(gst_base_transform_transform_caps): More debugging.
* gst/gstmessage.h (gst_message_new_application): Take a GstObject
src argument.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
Original commit message from CVS:
2005-07-02 Jan Schmidt <thaytan@mad.scientist.com>
* gst/gstpad.c: (gst_pad_emit_have_data_signal):
Put the mini_object into GValue as a mini_object,
not a gpointer.
Original commit message from CVS:
* gst/gstpad.c: (_gst_do_pass_data_accumulator),
(silly_return_true_function), (gst_pad_class_init),
(gst_pad_emit_have_data_signal), (gst_pad_chain), (gst_pad_push),
(gst_pad_get_range), (gst_pad_pull_range), (gst_pad_push_event),
(gst_pad_send_event):
Fix accumulator, add default value by using _emitv() instead
of _emit() for signal emission.
Original commit message from CVS:
* docs/manual/advanced-dataaccess.xml:
* examples/manual/Makefile.am:
Add probe example.
* gst/gstpad.c: (_gst_do_pass_data_accumulator):
Make work (??).
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
Small debug line.
* gst/gstclock.h:
map SIGNAL and BROADCAST to the right function.
* gst/gstobject.h:
Remove redundant braces.
* gst/gstpad.c: (gst_pad_set_caps):
Don't call setcaps function when reseting caps to NULL.
* gst/gstsystemclock.c: (gst_system_clock_dispose),
(gst_system_clock_async_thread), (gst_system_clock_id_wait_async),
(gst_system_clock_id_unschedule):
Use BROADCAST as this is what we do.
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
2005-06-23 Jan Schmidt <thaytan@mad.scientist.com>
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
Don't restart typefinding on a discont.
* gst/gstelement.c: (gst_element_set_state):
Debug spelling fix.
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_send_event):
Allow changing mode of an active pad.
Debug output fixes.
* gst/registries/gstlibxmlregistry.c: (load_feature):
Don't cast a static pad template to a normal pad template.
Original commit message from CVS:
* gst/gstpad.c:
Small doc updates.
* gst/gstvalue.c: (gst_value_compare_buffer),
(gst_value_serialize_buffer), (gst_value_deserialize_buffer),
(gst_value_compare_flags), (gst_value_serialize_flags),
(gst_value_deserialize_flags), (_gst_value_initialize):
Fix serialisation of buffers, they are not boxed types anymore
Original commit message from CVS:
* check/gstcheck.h:
add macros for checking refcounts on objects and caps
* check/gst/gstpad.c: (START_TEST), (gst_pad_suite):
add some more unit tests
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_allowed_caps):
fix leaked refcounts (I hope :)) so unittest works
* gst/gstpad.h:
whitespace removal
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* gst/gstpad.c: (gst_real_pad_init), (gst_pad_set_active),
(gst_pad_link_prepare), (gst_pad_link), (gst_pad_accept_caps),
(gst_pad_configure_sink), (gst_pad_configure_src),
(gst_pad_alloc_buffer), (gst_pad_query), (gst_pad_send_event),
(gst_pad_start_task):
Propagate errors from _set_caps() in configure_src/sink
functions instead of returning TRUE.
FLUSH events can travel up and downstream
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_alloc_buffer),
(gst_pad_query), (gst_pad_send_event), (gst_pad_start_task):
A flushing pad cannot be used to alloc_buffer from.
Original commit message from CVS:
* gst/gstbin.c: (bin_element_is_sink), (has_ancestor),
(bin_element_is_semi_sink), (append_child), (gst_bin_change_state):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_send_event), (gst_pad_start_task):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop),
(gst_queue_sink_activate), (gst_queue_src_activate),
(gst_queue_change_state):
* gst/gstqueue.h:
Fix state changes for non sinks. We now change sinks, then elements
with unconnected srcpads, then the rest.
More efficient queue unlocking in flush and state changes.
Set the pad activate mode even if it does not have an activate
function.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_send_event), (gst_pad_start_task):
Disable attempt at mode switching until it is figured out.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_finish_preroll),
(gst_basesink_chain_unlocked), (gst_basesink_activate):
* gst/gstminiobject.c: (gst_mini_object_get_type),
(gst_mini_object_free):
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_push), (gst_pad_push_event):
* gst/gstqueue.c: (gst_queue_change_state):
Don't queue buffers in basesink when we are flushing.
Unref buffer when flushing in basesink.
Flush queue when going to READY
Unref buffer when _push() returns an error.
Don't free MiniObject instance when refcount is incremented
in _finalize() so that we can recover objects.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_set_caps),
(gst_pad_alloc_buffer), (gst_pad_query), (gst_pad_push):
* gst/gstqueue.c: (gst_queue_change_state):
Clear queue when going to READY.
Remove IN_SETCAPS flag too.
Original commit message from CVS:
Remove old query functions. Ported old code.
Added position/convert helper functions to gstutils.
Reordered gstpad.c code, grouping relevant things.
Remove gst_message_new(), always need to speficy a specific
message.
Original commit message from CVS:
2005-05-09 Andy Wingo <wingo@pobox.com>
* gst/gstiterator.h: Add some includes.
* gst/gstqueryutils.h: Include more headers.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_query_position): New routine, replaces
some uses of gst_pad_query.
* gst/gstqueryutils.c: Build fixes. Make parse functions ignore
NULL out parameters.
(gst_query_new_position): New proc, allocates a new position
query.
* gst/Makefile.am (libgstreamer_@GST_MAJORMINOR@_la_SOURCES): Add
gstqueryutils.c to the build.
* gst/gststructure.c (gst_structure_set_valist): Implement with
the generic G_VALUE_COLLECT.
Original commit message from CVS:
2005-05-06 Andy Wingo <wingo@pobox.com>
* gst/gstquery.h
* gst/gstquery.c (_gst_query_initialize): Extend GstQuery from
GstData, init a memchunk.
(standard_definitions): Add a few query types, deprecate a few.
(gst_query_get_type): New proc.
(_gst_query_copy, _gst_query_free, gst_query_new): GstData
implementation.
(gst_query_new_application, gst_query_get_structure): New public
procs.
* docs/design/draft-query.txt: Removed LINKS from the query types,
because all the rest can be dispatched to other pads -- seemed
ugly to have a query that couldn't be dispatched. internal_links
is fine as a pad method.
* gst/gstpad.h: Add query2 as a pad method, add the new functions
in gstpad.c, but maintain binary compatibility for the moment.
Will fix before 0.9 is out.
* gst/gstqueryutils.c:
* gst/gstqueryutils.h: New files, implement 3 methods for each
query type: parse_query, parse_response, and set. Probably need an
allocator as well.
* gst/gst.h: Add gstquery.h and gstqueryutils.h to the list.
* gst/elements/gstfilesink.c (gst_filesink_query2):
* gst/base/gstbasesrc.c (gst_basesrc_query2): Replace old query,
query_types, and formats methods.
* gst/gstpad.c (gst_pad_query2, gst_pad_query2_default)
(gst_pad_set_query2_function): New functions.
(gst_real_pad_init): Set query2_default as the default query2
function. Basically just dispatches to internally linked pads.
Needs review!
* gst/gstdata_private.h (_GST_DATA_INIT): Set data->refcount to 1
without using the atomic operations. Only one thread can possibly
be accessing the data at this point. Changed so as to avoid
gst_atomic operations.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_proxy_getcaps):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_getcaps):
* gst/gstpad.c: (gst_pad_peer_get_caps):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_bufferalloc), (gst_queue_handle_sink_event),
(gst_queue_src_activate), (gst_queue_change_state):
* gst/gstqueue.h:
* gst/gstutils.c: (gst_element_get_compatible_pad_template),
(intersect_caps_func):
Fix gst_pad_peer_get_caps(), make it return NULL if no peer.
Always take QUEUE_LOCK after STREAM_LOCK or we might deadlock.
Some fixes for the peer_get_caps() change.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_set_checkgetrange_function),
(gst_pad_link_check_compatible_unlocked), (gst_pad_link_prepare),
(gst_pad_check_pull_range), (gst_pad_pull_range),
(gst_static_pad_template_get_caps), (gst_pad_start_task),
(gst_pad_pause_task), (gst_pad_stop_task):
* gst/gstplugin.c: (gst_plugin_load):
* gst/gstplugin.h:
Remove gst_library_load as it does more harm than good with
the new g_module flags.
Revert bogus caps template check in pad linking, pad caps
are important when linking not the template, which is more
general than the current caps.
Original commit message from CVS:
* check/gst/gstpad.c: (START_TEST): Oh yeah, it's always nice to
make the regressions tests work. Remove some code that is no
longer true.
* gst/gstpad.c: (gst_pad_link_check_templates_compatible_unlocked):
Disable warning for pads without templates.
Original commit message from CVS:
* gst/gstpad.c: Remove handling of filtered caps. Fix/merge
functions that handle filtered links.
* gst/gstpad.h: Remove 'appfilter' field and prototypes of
removed functions.
* gst/gstutils.c: Fix/remove utility functions that handle
filtered caps.
* gst/gstutils.h:
* gst/gstvalue.c: Add serialization/deserialization of caps
* gst/parse/grammar.y: Ignore filtered caps when linking. This
requires fixing so that the filter caps notation creates
a capsfilter element and sets the filter_caps property. I
think everyone probably wants to keep the shorthand notation.
* docs/gst/tmpl/gstelement.sgml: updates for API changes.
* docs/gst/tmpl/gstpad.sgml:
* gst/elements/gstelements.c: Register capsfilter element.
* gst/Makefile.am: fix spacing
* docs/random/ds/0.9-suggested-changes: random
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_discontinuous_valist),
(gst_event_new_discontinuous), (gst_event_discont_get_value):
* gst/gstevent.h:
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_pull_range):
Added rate to the discont event to prepare for variable speed
and reverse playback.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
Original commit message from CVS:
Added state change code.
Added/updated docs.
Added sink base class, make fakesink extend the base class.
Small cleanups in GstPipeline.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_manager),
(gst_bin_send_event):
Add default event/set_manager handlers. The set_manager handler
takes care that the manager is distributed over kids that were
already in the bin before the manager was set. The event handler
is a utility virtual function that sends the event over all sinks,
so that gst_element_send_event (bin, event); has the expected
behaviour.
* gst/gstpad.c: (gst_pad_event_default):
Re-install default event handling for discontinuities, so that
seeking works without requiring hacks in applications or extra
code in sinks.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_send_event):
Half hack, half utility: set a pipeline to PAUSED for seek events,
since that is the only way we can guarantee a/v sync. Means that
you can do gst_element_seek (pipeline, method, pos); on a pipeline
and it "just works".
Original commit message from CVS:
Next big merge.
Added GstBus for mainloop integration.
Added GstMessage for sending notifications on the bus.
Added GstTask as an abstraction for pipeline entry points.
Removed GstThread.
Removed Schedulers.
Simplified GstQueue for multithreaded core.
Made _link threadsafe, removed old capsnego.
Added STREAM_LOCK and PREROLL_LOCK in GstPad.
Added pad blocking functions.
Reworked scheduling functions in GstPad to prepare for
scheduling updates soon.
Moved events out of data stream.
Simplified GstEvent types.
Added return values to push/pull.
Removed clocking from GstElement.
Added prototypes for state change function for next merge.
Removed iterate from bins and state change management.
Fixed some elements, disabled others for now.
Fixed -inspect and -launch.
Added check for GstBus.
Original commit message from CVS:
Added GstBin test.
Added GstSystemClock test.
Implemented clock distribution code in GstBin.
Implemented iterate sinks method for future use.
Rearranged gstelement.h
Fix GstIterator comparison bug.
Moved some code to GstPipeline, mostly clocking related.
Original commit message from CVS:
First THREADED backport attempt, focusing on adding locks and
making sure the API is threadsafe. Needs more work. More docs
follow this week.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_child_state_change_func):
Remove a piece of code that could never be reached.
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_push), (gst_pad_pull),
(gst_pad_call_get_function):
* gst/gstpad.h:
* testsuite/pad/Makefile.am:
Fix#150546, enable tests.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_push):
Add check that the pad on which the push is performed is not a
get-based pad (#150546).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_query):
Do query on realized pad, similar to how convert/send_event handle
this. Also makes sense, since this pad belongs to the function to
which this query will be sent. Fixes#158163.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_is_negotiated),
(gst_pad_get_negotiated_caps):
GST_RPAD_* will only operate on a RealPad (it casts the pointer,
it doesn't actually check the contents), so be sure to hand it
a RealPad else we'll crash.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_is_fixed_foreach):
* gst/gstpad.c: (_gst_pad_default_fixate_value),
(_gst_pad_default_fixate_foreach):
* gst/gstvalue.c: (gst_type_is_fixed), (gst_value_is_fixed):
* gst/gstvalue.h:
Deprecate _type_is_fixed, use _value_is_fixed instead, since
in some cases (arrays), the fixedness depends on the content.
* gst/gstqueue.c: (gst_queue_handle_src_query):
Check for availability before doing something.
Original commit message from CVS:
2004-11-07 Martin Soto <martinsoto@users.sourceforge.net>
* gst/gstpad.c (gst_pad_collectv): Fix the return line.
(gst_pad_collect_valist): Fix gst_pad_collect_array
invocation. Apparently this functions were never tested.
