Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_session):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_finalize):
Avoid leaking pads in the RTP manager.
Original commit message from CVS:
Based on patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(rtcp_thread), (start_rtcp_thread), (stop_rtcp_thread),
(join_rtcp_thread), (gst_rtp_session_change_state):
Avoid a deadlock when joining the RTCP thread in PAUSED because it might
be blocked downstream. Also avoid spawning multiple rtcp threads.
Fixes#520894.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic@users.sf.net>
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Don't try to reset the clock skew when we have no timestamps.
Fixes#519005.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate):
Ignore streams that did not receive an SR packet when doing
synchronisation. Fixes#516160.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir at gmail dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Try to get the new clock-rate from the buffer caps when we receive a new
payload type instead of always firing the signal. Fixes#512774.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(create_stream), (payload_type_change), (new_ssrc_pad_found):
Also handle lip-sync when the clock-rate is not provided with caps but
with a signal.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the fixed clock-rate from the jitterbuffer and extend it so that
a clock-rate can be provided with each buffer instead. Fixes#511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_change_state),
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Remove old unused variable.
Track pt on input buffers and get the clock-rate when it changes.
Ignore packets with unknown clock-rate. See #511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/rtpsource.c: Fix unref of buffer using the
wrong function. Fixes#511920
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_next_timeout),
When reconsidering RTCP timeouts, set the next timeout against the last
report time instead of the current clock time so that we don't end up
reconsidering forever.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Only peek at the tail element instead of popping it off, which allows
us to greatly simplify things when the tail element changes.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_recv_rtp_sink):
* gst/rtpmanager/gstrtpssrcdemux.c:
(gst_rtp_ssrc_demux_sink_event):
Forward FLUSH events instead of leaking them.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the tail-changed callback in favour of a simple boolean when we
insert a buffer in the queue.
Add method to peek the tail of the buffer.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (apply_offset),
(gst_rtp_jitter_buffer_loop):
Remove some old unused variables.
Don't add the latency to the skew corrected timestamp, latency is only
used to sync against the clock.
Improve debugging.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_reset_skew), (calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Handle case where server timestamp goes backwards or wildly jumps by
temporarily pausing the skew correction.
Improve debugging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_client):
Fix crasher in dispose.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Handle cases where input buffers have no timestamps so that no clock
skew can be calculated, in this case interpollate timestamps based on
rtp timestamp and assume a 0 clock skew.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c: (apply_latency),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query):
Remove jitter correction code, it's now in the lower level object.
Use new -core method for doing a peer query.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Move jitter correction to the lowlevel jitterbuffer.
Increase the max window size.
When filling the window, already start estimating the skew using a
parabolic weighting factor so that we have a much better startup
behaviour that gets more accurate with the more samples we have.
Increase the default weighting factor for the steady state to get
smoother timestamps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_dispose),
(gst_rtp_bin_finalize):
Fix cleanup crasher.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Dynamically adjust the skew calculation window so that we calculate it
over a period of around 2 seconds.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (calc_ntp_ns_base),
(gst_rtp_bin_change_state), (new_payload_found), (create_send_rtp):
Calculate and configure the NTP base time so that we can generate better
NTP times in SR packets.
Set caps on new ghostpad.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Clean debug statement.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_internal_links), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Add ntp-ns-base property to convert running_time to NTP time.
Handle NEWSEGMENT events on send and recv RTP pads so that we can
calculate the running time and thus NTP time of the packets.
Simplify getting the current NTP time using the pipeline clock.
Implement internal links functions.
Use the buffer timestamp to calculate the NTP time instead of the clock.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_chain), (gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links),
(gst_rtp_ssrc_demux_src_query):
* gst/rtpmanager/gstrtpssrcdemux.h:
Implement internal links function.
Calculate the diff between different streams, this might be used later
to get the inter stream latency.
* gst/rtpmanager/rtpsession.c: (rtp_session_send_rtp):
Simple cleanup.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp), (rtp_source_get_new_sr):
Make the clock skew window a little bigger.
Apply the clock skew to all buffers, not just one with a new timestamp.
Calculate and debug sender clock drift.
Use extended last timestamp to interpollate for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_client),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain), (create_stream),
(gst_rtp_bin_init), (caps_changed), (new_ssrc_pad_found),
(create_recv_rtp), (create_recv_rtcp), (create_send_rtp):
* gst/rtpmanager/gstrtpbin.h:
Updated example pipelines in docs.
Handle sync_rtcp buffers from the SSRC demuxer to perform lip-sync.
Set the default latency correctly.
Add some more points where we can get caps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Add ts-offset property to control timestamping.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_send_rtcp), (gst_rtp_session_sync_rtcp),
(gst_rtp_session_cache_caps), (gst_rtp_session_clock_rate),
(gst_rtp_session_sink_setcaps), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Various cleanups.
Feed rtpsession manager with NTP time based on pipeline clock when
handling RTP packets and RTCP timeouts.
Perform all RTCP with the system clock.
Set caps on RTCP outgoing buffers.
* gst/rtpmanager/gstrtpssrcdemux.c: (find_demux_pad_for_ssrc),
(create_demux_pad_for_ssrc), (gst_rtp_ssrc_demux_base_init),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain):
* gst/rtpmanager/gstrtpssrcdemux.h:
Also demux RTCP messages.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rb), (rtp_session_process_sr),
(rtp_session_process_rr), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_send_bye),
(session_start_rtcp), (session_report_blocks), (session_cleanup),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Remove the get_time callback, the GStreamer part will feed us with
enough timing information.
Split sync timing and RTCP timing information.
Factor out common RB handling for SR and RR.
Send out SR RTCP packets for lip-sync.
Move SR and RR packet info generation to the source.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp),
(rtp_source_process_sr), (rtp_source_process_rb),
(rtp_source_get_new_sr), (rtp_source_get_new_rb),
(rtp_source_get_last_sr):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Use caps on incomming buffers to get timing information when they are
there.
Calculate clock scew of the receiver compared to the sender and adjust
the rtp timestamps.
Calculate the round trip in sources.
Do SR and RR calculations in the source.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop):
Use extended timestamp to release buffers from the jitterbuffer so that
we can handle the rtp wraparound correctly.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Improve Comments.
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state), (gst_rtp_session_parse_caps),
(gst_rtp_session_clock_rate), (gst_rtp_session_sink_setcaps),
(gst_rtp_session_event_send_rtp_sink), (create_recv_rtp_sink),
(create_send_rtp_sink):
Also parse the sink caps for clock-rate instead of only relying on the
result of the signal.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Make sure we fetch the clock rate for payloads we are sending out so
that we can use it for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state),
(gst_rtp_session_event_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Distribute synchronisation parameters to the session manager so that it
can generate correct SR packets for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_base_time),
(rtp_session_set_timestamp_sync), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Add methods for setting sync parameters.
Set correct RTP time in SR packets using the sync params.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Record last RTP <-> GST timestamp so that we can use them to convert NTP
to RTP timestamps in SR packets.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_clear_pt_map):
Add some more advanced example pipelines.
* gst/rtpmanager/gstrtpsession.c: (rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_send_rtcp):
Add some debug and FIXME.
Release LOCK when performing session cleanup.
* gst/rtpmanager/rtpsession.c: (session_report_blocks):
Add some debug.
* gst/rtpmanager/rtpsource.c: (calculate_jitter),
(rtp_source_send_rtp):
Make sure we always send RTP packets with the session SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query):
When synchronizing buffers, take peer latency into account.
Don't try to add our latency to invalid peer max latency values.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.signals:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpclient.h:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpptdemux.h:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpsession.h:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/rtpmanager/gstrtpssrcdemux.h:
Rename all GstRTPFoo structs to GstRtpFoo so that GST_BOILERPLATE
registers a GType that's different than the GstRTPFoo types that
farsight registers (luckily GType names are case sensitive). Should
finally fix#430664.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_set_property):
When drop-on-latency is set but we have no latency configured, just push
the buffer as fast as possible.
Fix typo in comment.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_sink_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix EOS handling.
Convert some DEBUG into WARNINGs.
Pause task when flushing.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(rtcp_thread), (gst_rtp_session_event_recv_rtcp_sink):
Use system clock for RTCP session management timeouts.
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_bye_ssrc), (on_bye_timeout), (on_timeout):
Release the session lock when emiting signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
Add some debug info.
* gst/rtpmanager/rtpsession.c: (rtp_session_init),
(rtp_session_send_rtp):
Store real user name in the session.
Original commit message from CVS:
* gst/rtpmanager/async_jitter_queue.c: (signal_waiting_threads),
(async_jitter_queue_pop_intern_unlocked):
Fix the case where the buffer underruns and does not block.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_base_init),
(create_recv_rtcp), (create_send_rtp), (create_rtcp),
(gst_rtp_bin_request_new_pad):
Rename RTCP send pad, like in the session manager.
Allow getting an RTCP pad for receiving even if we don't receive RTP.
fix handling of send_rtp_src pad.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
When no pt map could be found, fall back to the sinkpad caps.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Fix pad names.
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_create_source), (rtp_session_process_sr),
(rtp_session_send_rtp), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Unlock session when performing a callback.
Add callbacks for the internal session object.
Fix sending of RTP packets.
first attempt at adding NTP times in the SR packets.
Small debug and doc improvements.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Update stats for SR reports.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst/rtpmanager/gstrtpbin.c: (create_stream),
(gst_rtp_bin_class_init), (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Make default jitterbuffer latency configurable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Debuging cleanups.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_finalize):
Don't use GLib-2.10 API, we only require GLib 2.8 at the moment.
Original commit message from CVS:
* configure.ac:
Disable rtpmanager for now because it depends on CVS -base.
* gst/rtpmanager/Makefile.am:
Added new files for session manager.
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(create_stream), (pt_map_requested), (new_ssrc_pad_found):
Some cleanups.
the session manager can now also request a pt-map.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_base_init),
(gst_rtp_session_class_init), (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread), (start_rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_process_rtp), (gst_rtp_session_send_rtp),
(gst_rtp_session_send_rtcp), (gst_rtp_session_clock_rate),
(gst_rtp_session_get_time), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_recv_rtcp_sink),
(gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_send_rtcp_src),
(gst_rtp_session_request_new_pad):
* gst/rtpmanager/gstrtpsession.h:
We can ask for pt-map now too when the session manager needs it.
Hook up to the new session manager, implement the needed callbacks for
pushing data, getting clock time and requesting clock-rates.
Rename rtcp_src to send_rtcp_src to make it clear that this RTCP is to
be send to clients.
Add code to start and stop the thread that will schedule RTCP through
the session manager.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_new_ssrc), (on_ssrc_collision), (on_ssrc_validated),
(on_bye_ssrc), (rtp_session_new), (rtp_session_set_callbacks),
(rtp_session_set_bandwidth), (rtp_session_get_bandwidth),
(rtp_session_set_rtcp_bandwidth), (rtp_session_get_rtcp_bandwidth),
(source_push_rtp), (source_clock_rate), (check_collision),
(obtain_source), (rtp_session_add_source),
(rtp_session_get_num_sources),
(rtp_session_get_num_active_sources),
(rtp_session_get_source_by_ssrc),
(rtp_session_get_source_by_cname), (rtp_session_create_source),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye),
(rtp_session_process_app), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_get_rtcp_interval),
(rtp_session_produce_rtcp):
* gst/rtpmanager/rtpsession.h:
The advanced beginnings of the main session manager that handles the
participant database of RTPSources, SSRC probation, SSRC collisions,
parse RTCP to update source stats. etc..
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_finalize), (rtp_source_new),
(rtp_source_set_callbacks), (rtp_source_set_as_csrc),
(rtp_source_set_rtp_from), (rtp_source_set_rtcp_from),
(push_packet), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_process_bye),
(rtp_source_send_rtp), (rtp_source_process_sr),
(rtp_source_process_rb):
* gst/rtpmanager/rtpsource.h:
Object that encapsulates an SSRC and its state in the database.
Calculates the jitter and transit times of data packets.
* gst/rtpmanager/rtpstats.c: (rtp_stats_init_defaults),
(rtp_stats_calculate_rtcp_interval), (rtp_stats_add_rtcp_jitter):
* gst/rtpmanager/rtpstats.h:
Various stats regarding the session and sources.
Used to calculate the RTCP interval.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
Some more custom marshallers.
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(clock_rate_request), (create_stream), (gst_rtp_bin_class_init),
(pt_map_requested), (new_ssrc_pad_found), (create_recv_rtp):
* gst/rtpmanager/gstrtpbin.h:
Prepare for caching pt maps.
Connect to signals to collect pt maps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add request_clock_rate signal.
Use scale insteat of scale_int because the later does not deal with
negative numbers.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_class_init),
(gst_rtp_pt_demux_chain):
* gst/rtpmanager/gstrtpptdemux.h:
Implement request-pt-map signal.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_init), (gst_rtp_bin_provide_clock):
* gst/rtpmanager/gstrtpbin.h:
Provide a clock.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Add some debug and comments.
Fix double unref() in error cases.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file
Also used various streaming sources available on the internet to fine-tune
the code.
The header/codec_data extraction methods are from FFMpeg (LGPL).
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.
Fixes#564437
sizeof("foo") includes the string's NUL-terminator in the size returned,
but we're writing strings here with an explicit size at the beginning
and no NUL-terminator. In most cases using sizeof("foo") as length in
memcpy is not harmful, but it is where the string goes right at the
end of our buffer to write, since we don't allocate space for that
NUL terminator.
These filters use information from previous frames to
generate the current frame and a caps change will make
the effect start from the beginning again.
This produces a water ripple effect on the video input,
based on motion or a rain drop algorithm.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588695.
This combines the StreakTV and BaltanTV filters from the
effectv project.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588368.
This filter adds a radiation-like motion blur effect
to the video stream.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588359.
This filter binarizes input frames and combines them with various
optical pattern.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588349.
When blending a source layer with an alpha of 'a' on top of another
destination layer we take the sum of:
* 'a' percent of the source layer
* (100 - 'a') percent of the destination layer (the remainder)
Once buffering has started (with an mdat atom), continue buffering
until moov atom is reached, which handles cases with multiple
mdat atoms. Also keep adapter/offset better in sync with upstream
and fix some debug statements. Fixes#587426.
This reverts commit 5503a59a57.
Reverting this since it causes regressions with a lot of sample files
I have, all of which worked fine with the last -good release (#586891).
Whenever we alloc something based on a user-supplied size, we should
really use g_try_new(), otherwise we can easily be made to abort by
passing a ridiculously large number to us for allocing. Fixes
problems with some fuzzed files.
Check the possibly 64-bit atom size more carefully before casting it
to an int and passing it to gst_pad_pull_range(), otherwise we might
end up pulling 0 bytes, getting an empty buffer as requested and
dereferencing not available data whilst thinking we actually asked
for and got 0x1000000000000 bytes. Similar fix for push mode operation
where neededbytes ends up being 0 bytes, which makes us assert. Fixes
crash with broken or fuzzed file (NB #122378).
Fix the caps to include the depth (instead of width twice) in the caps of
audio/x-raw-int.
Fix negotiation to not only copy the rate/channels of the first structure.
Don't call gst_avi_demux_src_convert() for each single index entry. Not
only do we already have the pointer to the stream context, we also know
the formats we want to convert from and to already, so we may just as
well use optimised conversion routines that bypass some of the checks
and lookups made in gst_avi_demux_src_convert().
Include the header from where we include all the system headers with the
socket stuff before we try to define EAI_ADDRFAMILY ourselves, otherwise
we define it ourselves and then get a compiler warning if a system header
defines it as well without guarding against it being defined already.
Don't leak buffers when resyncing to a keyframe.
Avoid leaking buffers when exiting the loop on error conditions.
Add some more debug info.
Fixes#585911
The previous patch to add support for additional sample formats possibly
introduced a reentrancy bug: a variable used for a loop index was declared
static. This patch fixes that, and also adds a "/* *INDENT-ON* */" annotation
following the macro block. (I don't know what the annotation is for, but the
adder, where I copied this from, has it).
Setting it to a value<16 would cause crashes before because
current_plane was set to the old number of planes-1. Also
fix calculations for non-2^n planes values.
