These are not usable as they are, and can easily lead to crash
or leaks. This also silence warning from the scanner. If we manage to
make this usable, we can then remove that mark, it will require
to make this type boxed.
gstbasetransform.h:196: Warning: GstBase: "@submit_input_buffer" parameter unexpected at this location:
* @submit_input_buffer: Function which accepts a new input buffer and pre-processes it.
gstnetcontrolmessagemeta.c:103: Warning: GstNet: gst_buffer_add_net_control_message_meta: unknown parameter 'message' in documentation comment, should be 'addr'
Make gst_collect_pads_clip_running_time() function also store the
signed DTS in the CollectData. This signed DTS value can be used by
muxers to properly handle streams where DTS can be negative initially.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Allow for sub-classes which want to collate incoming buffers or
split them into multiple output buffers by separating the input
buffer submission from output buffer generation and allowing
for looping of one of the phases depending on pull or push mode
operation.
https://bugzilla.gnome.org/show_bug.cgi?id=750033
In basesink functions gst_base_sink_chain_unlocked(), below code is used to
checking if buffer is late before doing prepare call to save some effort:
if (syncable && do_sync)
late =
gst_base_sink_is_too_late (basesink, obj, rstart, rstop,
GST_CLOCK_EARLY, 0, FALSE);
if (G_UNLIKELY (late))
goto dropped;
But this code has problem, it should calculate jitter based on current media
clock, rather than just passing 0. I found it will drop all the frames when
rewind in slow speed, such as -2X.
https://bugzilla.gnome.org/show_bug.cgi?id=749258
Since frame->priv->discont was cleared earlier,
GST_BASE_PARSE_FLAG_LOST_SYNC was never being set.
Take the chance to refactor the frame creation a bit to
organize the flags setting and reset.
https://bugzilla.gnome.org/show_bug.cgi?id=738237
Otherwise we're going to set a rather arbitrary DTS of segment.start (usually
0) for live sources, which confuses synchronization if the source started
capturing at a later time. And it's especially wrong for raw media, for which
we should not set any DTS at all.
https://bugzilla.gnome.org/show_bug.cgi?id=747731
It could be triggered by:
gst-launch-1.0 videotestsrc num-buffers=20 ! videcrop bottom=214748364 ! videoconvert ! autovideosink
Spotted while testing:
https://bugzilla.gnome.org/show_bug.cgi?id=743910
The flush-stop event should not restart the task for live sources unless
the element is playing. This was breaking seeks in pause with the rtpsrc.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
Otherwise baseparse will consider empty streams to be an error while
an empty stream is a valid scenario. With this patch, errors would
only be emitted if the parser received data but wasn't able to
produce any output from it.
This change is only for push-mode operation as in pull mode an
empty file can be considered an error for the one driving the
pipeline
Includes a unit test for it
https://bugzilla.gnome.org/show_bug.cgi?id=733171
Large scale skip is an optimization, and thus it is safer to
stop skipping than to continue. Clear skip on segments and
discontinuities, as these are points where it is possible that
the original idea of "bytes to skip" changes.
Allows buffers to be reclaimed when caps is to be renegotiated so
that bufferpools can be stopped. As the allocation query is
serialized all buffers have been already drained from the pipeline,
except this last_sample one.
https://bugzilla.gnome.org/show_bug.cgi?id=682770
Use gst_buffer_copy_deep() to force the copy of the underlying
memory instead of possibly doing a shallow copy of the buffer
and just referencing the memory
https://bugzilla.gnome.org/show_bug.cgi?id=745287
Based on patch from Song Bing <b06498@freescale.com>
Don't just set the need_preroll flag to TRUE in all cases. When we
are already prerolled it needs to be set to FALSE and when we go to
READY we should not touch it. We should only set it to TRUE in other
cases, like what the code above does.
See https://bugzilla.gnome.org/show_bug.cgi?id=736655
Both for the peer filter caps and the converted caps based on the peer caps.
If the peer filter caps are EMPTY, the peer caps query will also return
EMPTY. There's no ned to both downstream/upstream with this query.
When using a negative rate (rate being segment.rate * segment.applied_rate),
we will end up reporting decreasing positions, therefore adjust the clamping
against last reported value accordingly.
Fixes positions getting properly reported with applied_rate < 0.0
https://bugzilla.gnome.org/show_bug.cgi?id=738092
TRUE is 1, but every other non-zero value is also considered true. Comparing
for equality with TRUE would only consider 1 but not the others.
Also normalize booleans in a few places.
Instead of checking if our outcaps are equivalent to the previous incaps, and
if that is the case not setting any caps on the pad... compare against our
previous outcaps because that's what we care about.
Fixes some cases where the outcaps became equivalent to the previous incaps,
but the previous outcaps were different and we were then sending buffers
downstream that were corresponding to the caps we forgot to set on the pad.
Resulting in crashes or image corruption.
Currently we are just returning FALSE, but we do have the information
we should just answer the query the same way as when answering through
the GstElement.query vmethod default implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=739580
Fixes 'Attempt to unlock mutex that was not locked'
warning with newer GLibs when sink is shut down in
certain situations. Triggered by the decodebin
test_reuse_without_decoders unit test in -base
sometimes, esp. on slower machines.
Add a first_buffer boolean state flag to have baseparse do actions
before pushing data. This is used to check the caps for streamheader
buffers that are prepended to the stream, but only if the first buffer
isn't already marked with the _HEADER flag. In this case, it is assumed
that the _HEADER marked buffer is the same as the streamheader.
https://bugzilla.gnome.org/show_bug.cgi?id=735070
Adds API to get or peek a sub-reader of a certain size from
a given byte reader. This is useful when parsing nested chunks,
one can easily get a byte reader for a sub-chunk and make
sure one never reads beyond the sub-chunk boundary.
API: gst_byte_reader_peek_sub_reader()
API: gst_byte_reader_get_sub_reader()
Just remove one skip annotation that causes this:
** (g-ir-compiler:12458): ERROR **: Caught NULL node, parent=empty
with older g-i versions such as 1.32.1.
Adds gst_byte_reader_masked_scan_uint32_peek just like
GstAdapter has a _peek and non _peek version
Upgraded tests to check that the returned value is correct in the
_peek version
API: gst_byte_reader_masked_scan_uint32_peek
https://bugzilla.gnome.org/show_bug.cgi?id=728356
When going to READY, it is possible that we are still pusing a frame but that
our srcpad has already been set to flushing. In that case we should not
post any error on the bus but instead cleanly return FLOW_FLUSHING.
https://bugzilla.gnome.org/show_bug.cgi?id=733320
When the parser receives non-aligned packets it can push a buffer
and get a not-linked return while still leaving some data still to
be parsed. This remaining data will not form a complete frame and
the subclass likely returns _OK and baseparse would take that
as the return, while it the element is actually not-linked.
This patch fixes this by storing the last flow-return from a push
and using that if a parsing operation doesn't result in data being
flushed or skipped.
https://bugzilla.gnome.org/show_bug.cgi?id=731474
Currently the scan uses Boyer-moore method and its performance is good.
but, it can be optimized from an implementation of view.
The original scan code is implemented by byte array and index-based access.
In _scan_for_start_code(), the index is increasing from start to end and the
base address of the byte array is referred to as return value.
In the case, index-based access can be replaced by pointer access, which
improve the performance by removing index-related operations.
Its performace is enhanced by approximately 8% on arm-based embedded devices.
Although it seems trivial, it can affect the overall performance because the
_scan_for_start_code() function is very often called when H.264/H.265 video is
played.
In addition, the technique can apply for all architectures and it is good in
view of readability and maintainability.
https://bugzilla.gnome.org/show_bug.cgi?id=731442
Adds a utility struct that is capable of storing and aggregating flow returns
associated with pads.
This way all demuxers will have a standard function to use and have the
same expected results.
Includes tests.
https://bugzilla.gnome.org/show_bug.cgi?id=709224
Buffer pool set_config() may return FALSE if requested configuration needed
small changes. Reget the config and try setting it again (validating the
changes first). This ensure we have a configured pool if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=727916
Currently, if prepare() takes too much time, we skip the call to render().
The side effect of this, is that we endup starving the render(). The solution
in this patch is to always render frames that are on time before prepare() is
executed. This will maximize the number of frames we display and smoothly
degrade the rendering performance.
https://bugzilla.gnome.org/show_bug.cgi?id=729335
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
We iterate the current discont group backwards and push each GOP forwards,
starting from the last one. However if the first buffer in the current
discont group is a keyframe, we will keep it around until next time,
which is far from ideal. Just push it.
This prevents situations where a first branch would get seeked and
receive a buffer before all branches got seeked, and thus collected
would get called based on EOS from the previous segment.
As a consequence, during the process of seeking, don't decrease
the eospads number when a FLUSH_STOP is received.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=724571
Don't set the size to -1 in automatic_eos mode (which also updates the
duration to -1). We only want automatic_eos mode influence the maxsize
calculations without any side effects.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=724564
This defaults to TRUE and if it is set to FALSE it is the subclasses
responsibility to return GST_FLOW_EOS from the create() vmethod once
the stream is done.
Store the eos event seqnum and use it when creating the
new eos event to be pushed downstream. To know if the eos
was caused by the eos events received on send_event, a
'forced_eos' flag is used to use the correct seqnum on
the event pushed downstream.
Useful if the application wants to check if the EOS message
was generated from its own pushed EOS or from another source
(stream really finished).
Also adds a test for this
https://bugzilla.gnome.org/show_bug.cgi?id=722791
If on passthrough during reverse playback, do not accumulate buffers as
baseparse will never check for DISCONT flag to push those buffers.
So just push buffers downstream as if it was forward playback.
https://bugzilla.gnome.org/show_bug.cgi?id=721941
TIME segments are being ignored and a standard initialized
segment is used instead. This causes issues as not properly detecting
reverse playback or not cliping output based on the segment.
This seems to be a regression from one of the GstSegment/GstEvent
redesigns on the 0.10 -> 1.0 transition
It wasn't required, instead baseparse was using it to check the media
caps to identify if it was handling audio or video.
The pending_segment was removed and a checked_media boolean
replaced it for a more accurate naming.
https://bugzilla.gnome.org/show_bug.cgi?id=721350
A GAP event is handled as an empty buffer by sinks and they expect
to receive start up events before GAP events (like a segment).
This is important specially if there is a GAP at the beginning of
a stream (before any buffers) so that the segment event can be
pushed downstream before the GAP
https://bugzilla.gnome.org/show_bug.cgi?id=721350
* fix typo GstBufferFlag -> GstBufferFlags
* fix typo GstFeatures -> GstCapsFeatures
* fix typo GstAllocatorParams -> GstAllocationParams
* fix typo GstContrlSources -> GstControlSource
* do not refer to gstcheck as an object
* make references gtk_init() and tcase_set_timeout() not be references
* gst_element_get_pad() renamed gst_element_get_static_pad()
* gst_clock_id_wait_async_full() renamed gst_clock_id_wait_async()
* _drop_element() is really gst_queue_array_drop_element()
* gst_pad_accept_caps() was removed, do not refer to it
* separate GST_META_TAG_MEMORY_STR declaration from description
* do not describe removed gst_collect_pads_collect()
* correctly link to GstElementClass' virtual set_context()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=719614
pads->data is the public list. It is dynamically rebuilt at each call to
check_collected, in check_pads to be specific. When you add a pad and
collectpads have been started, it is not added to the public list.
Thus there exists a possible race where :
1) You would add a pad to collectpads while running.
2) You set collectpads to flushing before check_collected has been called again
-> the pad is not set to flushing
3) the pad starts pushing data as downstream might not be prepared, in the case
of adder it then returns FLOW_FLUSHING.
4) elements like demuxers, when they get a FLOW_FLUSHING, stop their tasks,
never to be seen again.
https://bugzilla.gnome.org/show_bug.cgi?id=708636
The seqnum of the segment after a seek should be the same of
the seek event. Downstream elements might rely on seqnums to
identify events related to a seek.
This is particularly important when a demuxer maps a TIME seek
into a BYTES seek for upstream and it needs to identify the
corresponding segment event and map it back into TIME to push
downstream, possibly using the values from the original seek
event.
https://bugzilla.gnome.org/show_bug.cgi?id=707530
If a pad is removed while a collectpads element (say adder) is in a chain
function waiting to be collected, there is a possibility that an unref happens
on a NULL pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=707536
This avoids triggering plenty of extra code/methods/overhead downstream when
we can just quickly check whenever we want to set caps whether they are
identical or not
https://bugzilla.gnome.org/show_bug.cgi?id=706600
Use custom code to implement flush-stop, we can't reuse the set_flushing code
because we can't touch the live_playing flag and we need to signal the
streaming thread.
In some specific cases (like transmuxing) we want to force the element
to actually parse all incoming data even if the element deems it is not
necessary.
This property simply ignores requests from the element to enable passthrough
mode which results in processing always being enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=705621
Adds a variant of the _push function that doesn't check the queue limits
before adding the new item. It is useful when pushing an element to the
queue shouldn't lock the thread.
One particular scenario is when the queue is used to serialize buffers
and events that are going to be pushed from another thread. The
dataqueue should have a limit on the amount of buffers to be stored to
avoid large memory consumption, but events can be considered to have
negligible impact on memory compared to buffers. So it is useful to be
used to push items into the queue that contain events, even though the
queue is already full, it shouldn't matter inserting an item that has
no significative size.
This scenario happens on adaptive elements (dashdemux / mssdemux) as
there is a single download thread fetching buffers and putting into the
dataqueues for the streams. This same download thread can als generate
events in some situations as caps changes, eos or a internal control
events. There can be a deadlock at preroll if the first buffer fetched
is large enough to fill the dataqueue and the download thread and the
next iteration of the download thread decides to push an event to this
same dataqueue before fetching buffers to other streams, if this push
locks, the pipeline will be stuck in preroll as no more buffers will be
downloaded.
There is a somewhat common practice in dash streams to have a single
very large buffer for audio and one for video, so this will always
happen as the download thread will have to push an EOS right after
fetching the first buffer for any stream.
API: gst_data_queue_push_force
https://bugzilla.gnome.org/show_bug.cgi?id=705694
Calling gst_buffer_get_size represented 2/3 of the cost of helper_find_peek
which was called whenever a typefindfunction wanted to peek at data.
We already know the size (from the GstMapInfo), so just use that.
Pass the fixed caps we're asked to accept as a filter for the caps
query, so we don't get a fully-expanded set of caps back (which we don't
need and can take a lot of time for intersection).
This reduces the time for camerabin to produce a second frame on a
logitech C910 camera from around 52 seconds to a bit less then 16
seconds on my system.
https://bugzilla.gnome.org/show_bug.cgi?id=702632
When we asynchronously go from READY to PLAYING, also call the
state change function so that subclasses can update their state for PLAYING.
Because the PREROLL lock is not recursive, we can't make this without
races and we must assume for now that the subclass can handle concurrent calls
to PAUSED->PLAYING and PLAYING->PAUSED. We can make this assumption because not
many elements actually do something in those state changes and the ones that
did would be broken even more without this change.
https://bugzilla.gnome.org/show_bug.cgi?id=702282
Doing it after every single create() is not very efficient and not necessary.
Especially on network file systems fstat() is not cached and causes network
traffic, making the source possibly unusable slow.
https://bugzilla.gnome.org/show_bug.cgi?id=652037
This makes sure that at least one buffer per second is rendered if buffers
are dropped before ::prepare. Without this change, at least one buffer per
second wouldn't be too late before ::prepare anymore but would be dropped
before ::render because of last_render_time being set before ::prepare
already.
This function works just like gst_data_queue_pop, but it doesn't
remove the object from the queue.
Useful when inspecting multiple GstDataQueues to decide from which
to pop the element from.
Add: gst_data_queue_peek
Importantly, this patch converts DTS to running time. Less importantly,
and possibly a problem for some muxers, is that it orders buffers by
DTS (if it is valid, otherwise PTS). This is generally correct, but
might be somewhat surprising to muxers.
Also note that once converted to running time, DTS can end up negative.
gst_pad_get_current_caps() on the source pad might yield NULL caps
if we're being shut down and the source pad has already been
deactivated by the other thread that's changing state. Just bail
out in that case, instead of passing NULL caps to the transform_size
function, which it might not expect.
Fixes spurious warnings in audioresample shutdown unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=693996
... and tracking of DTS. Fixes cases where PTS is locked on to the
DTS of an incoming buffer with no PTS with invalid data, leading to
no outgoing PTS (since it is not allowed smaller than DTS).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=691481
Use GSIZE_TO_POINTER instead. sizeof(GType) may be larger
than sizeof(gulong) and sizeof(int), so the casts may
chop off some bits from the GType value on some architectures.
Don't retry to negotiate when we fail to negotiate but instead produce a
NOT_NEGOTIATED error. We only want to retry negotiation if the result from
gst_pad_push() returned NOT_NEGOTIATED.
When negotiation fails, mark the pad as needing a reconfigure again so
that it gets picked up again next time.
Signed-off-by: Niv Sardi <xaiki@evilgiggle.com>
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=691986
The _1_0 suffixed environment variables override the
non-suffixed ones, so if we're in an environment that
sets the _1_0 suffixed ones, such as jhbuild, we need
to set those to make sure ours actually always get
used.
Useful for video parses that want to attach matter or
find out if downstream supports certain metas.
API: GstBaseParseClass::src_query()
API: GstBaseParseClass::sink_query()
https://bugzilla.gnome.org/show_bug.cgi?id=691475
Add a max-bitrate property that will slightly delay rendering of buffers if it
would exceed the maximum defined bitrate. This can be used to do
rate control on network sinks, for example.
API: GstBaseSink::max-bitrate
API: gst_base_sink_set_max_bitrate()
API: gst_base_sink_get_max_bitrate()
Large streams would index one frame every second, which can get quite
large with multi-hour streams, so add an additional byte-based
minimum distance as well, which will kick in for long streams
and make sure we never have more than a couple of thousand index
entries.
https://bugzilla.gnome.org/show_bug.cgi?id=666053
Using multiple libraries causes problems for the C# bindings and
will for similiar languages such as Java when there are bindings
for them.
Also change --library=libgstfoo-X.la to --library=gstfoo-X as
the man page suggests it should be done.
https://bugzilla.gnome.org/show_bug.cgi?id=679315
Use a new GCond, protected with the object lock, to signal completion
of the async state change. We can't reuse the live lock because that
one can be locked when the create function blocks.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=686723
gst_base_src_start_complete() can fail when the thread could not be
started, for example. Make sure it causes the state change to fail by
retrieving the result from _start_complete().
Basetransform attempts to do passthrough mode regardless of the order of
the transform_caps method. Add a method to disable this.
This is needed for elements like capsfilter that want to transform caps
based on the order of the caps property.
The 3rd parameter of gst_base_src_new_seamless_segment in
0.10 is the time associated with the start of the new segment,
not the position in the new segment. Fix the name of the parameter,
the docs, and the implementation to match the needs of the only
extant consumer: DVD playback.
It's not right, and we don't know what extra properties
that event might have set in future (e.g. sparseness).
This change means collectpad users need to create their
own stream-start event now. We could add a utility
function that creates a stream-start event based on
the input stream-start events.
Hacky, because the still-frame code all lives in -base, where we
can't use it - so this is a hacky duplication of -base code. Not
sure which way to fix this: Move baseparse to -base, or move still-frame
events to core?
Make the event handling more like what videodecoder does,
to ensure that all events are passed to child classes before being
placed on the pending queue or pushed onward.
We only deal in TIME format ourselves, but if the subclass can handle
converting other formats into TIME format, we can support that too.
Fixes seeking in DEFAULT (sample) format with flacparse,
and the flacdec unit test.
Sometimes a transform filter would need the buffer pool or the memory
allocator negotiated by the base class, for example, for querying different
parameters, such as a bigger number of buffers to allocate by the buffer pool.
This patch expose a two getters accessors: one for the buffer pool and the
other for the memory allocator.
Sometimes the sources would use the buffer pool or the memory allocator for
something else than just allocating output buffers; for example, querying for
different parameters, such as a bigger number of buffers to allocate by the
pool.
This patch expose a two getters accessors: one for the buffer pool and the
other for the memory allocator.
Don't just return FALSE for seek events with negative rates when
operating in push mode. An upstream demuxer may support this just
fine, so if we're not operating in pull mode always check upstream
first if it can handle the seek event. This fixes reverse playback
where the upstream demuxer supports it (e.g. with qtdemux). The
same code would work fine in 0.10, because baseparse will just
call the default pad event handler if FALSE was returned from the
baseparse event handler, and the pad event handler will just
forward it upstream. In 0.11 the baseclass or subclass is
responsible for chaining up to the parent class or forwarding the
event upstream in any case.
Disable reverse playback in pull mode for now, there seems to
be something going wrong with the segment configuration in that
case.
This specifies if a given taglist applies to the complete
medium or only this specific stream. By default a taglist
has a stream scope.
Fixes bug #677619.
Define a 0 and -1 step amount. They used to almost do the same thing but now, 0
cancels/stops the current step and -1 keeps on stepping until the end of the
segment.
See https://bugzilla.gnome.org/show_bug.cgi?id=679378
Move code that checks for upstream seekability and all that to
the right place, otherwise it will never be done for formats
that have headers such as FLAC, as handle_and_push frame will
be called the first time only after headers have been processed
(and framecount is > 0). This then makes us report that we
can't seek, which disables the seek bar in totem.
when we have a new step event with a -1 amount, make sure that we follow the
regular code path so that the stop_end handler is called as usual. This takes
care of flushing the buffer in case of a flushing step and also posts a step end
message.
See https://bugzilla.gnome.org/show_bug.cgi?id=679378
In 0.11 the caller may provide a buffer to be filled by the source to
pull_range/get_range/create, but it's easy to miss this new case when
porting code from 0.10. Provide fallback that copies the created data
into the provided buffer for now.
This makes oggdemux in pull-mode work with dataurisrc.
Make gst_query_add_allocation_meta() take a copy of the passed caps instead of
taking ownership. This makes it easier for the caller in most cases because it
doesn't have to make a copy and deal with NULL values.
Make GstAllocator a GstObject instead of a GstMiniObject, like bufferpool.
Make a new gstallocator.c file. Make a GstAllocator subclass for the default
allocator.
Make it possible to add API specific flags to the ALLOCATION query. This makes
it possible to also check what kinds of subfeatures of the metadata API are
supported.
This is a queue which has the same API as GQueue, except that:
* It uses an array, instead of a doubled-linked-list
* The array can only grow.
This code is not-threadsafe. It is up to the owner to make sure the
proper locking is taken before calling this API.
Rename gst_base_sink_wait_eos() to gst_base_sink_wait() to avoid confusion and
introspection problems with the ::wait_eos vmethod. Also this method can be used
to wait for other things than EOS. Update the docs a little.
Add the running-time of the buffer that caused the async operation to complete
to the async-done message.
Update bin to handle the new async-done message.
Use the new RESET_TIME message to reset the start-time of the pipeline to the
requested time.
Make basesink request a new running-time when the flush-stop message tells it to
insteasd of waiting for preroll.
Use the pad methods to set and check the reconfigure flags
Clear the reconfigure flag before we negotiate so that we don't miss any
reconfigure events while negotiating
Release the object lock before we get the time of the clock because that code
might take other locks.
Fix potential clock refcount error because we released the object lock but
didn't ref the clock.
... since processing might still continue (if e.g. NOT_LINKED)
and then proper state (e.g. offset) needs to be maintained
(e.g. to arrange for a new frame setup).
The proto for helper_find_suggest has a different argument than the actual
function in the same file has. This causes the Sun Studio compiler to fail.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=676624
Conflicts:
libs/gst/base/gsttypefindhelper.c
Add a prepare method that is called before sync happens. The purpose of this
method is to prepare the rendering of the giving buffer so that the following
render() call after sync is a quick as possible.
In gst_base_src_start_complete() we do a perform_seek() that will eventually
start the streaming thread which acquires the live lock and then goes to sleep
in the case of appsrc. Right after we perform seek we also try to acquire the
live lock which might then deadlock.
fix this by taking the stream lock before performing the seek. This makes sure
that the streaming thread cannot start and grab the live lock until we are done
and release the stream lock again.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=676048
This allows subclasses to override it, as is necessary for e.g. the
video-crop meta. It is now necessary that after decide_allocation()
there is always a allocator and a configured buffer pool inside the
query.
It causes the timestamp to go wrong, should not cause much of a performance
increase and in the cases where it is faster, it is broken in 0.10 as well.
We should try to review this when rewriting the adapter for 0.11 memory
features.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674791
... which presently mainly serves to answer SEEKING query negatively
to dissuade upstream encoders from doing any seeking and
"header finalization" (since the returned result of pushing a
sticky event is fairly useless nowadays).
Remove GST_MAJORMINOR and replace it by GST_API_VERSION
Also set GST_VERSION_{MAJOR,MINOR,MICRO,NANO} explicitely
now.
All versions are at 1.0.0 now for the release soon but
API/ABI can still change until the 1.0.0 release.
Next release versions until 1.0.0 will be 0.10.9X and
these will be release candidates. GST_VERSION_* will
nonetheless stay at 1.0.0.0.
This avoids ending up with plenty of pending data (since we'll only
try to parse/push one frame from the incoming buffer).
Fixes increasing memory consumption when parsers aren't linked
Conflicts:
libs/gst/base/gstbaseparse.c
This avoids ending up with plenty of pending data (since we'll only
try to parse/push one frame from the incoming buffer).
Fixes increasing memory consumption when parsers aren't linked
Add an option to control if transform_ip is called in passthrough mode or not.
for elements that don't want to look at the data in passthrough mode, this can
avoid some extra processing, mostly in subclasses.
gst_buffer_take_memory -> gst_buffer_insert_memory because insert is what the
method does.
Make all methods deal with ranges so that we can replace, merge, remove and map
a certain subset of the memory in a buffer. With the new methods we can make
some code nicer and reuse more code. Being able to deal with a subset of the
buffer memory allows us to optimize more cases later (most notably RTP headers
and payload that could be in different memory objects).
Make some more convenient macros that call the more generic range methods.
Add gst_buffer_append() which appends the memory blocks from one buffer to
another. Remove the old inefficient _merge() and _join() methods which forced a
premature memcpy in most cases.
Remove the _is_span() and _span() methods they are not needed anymore now that
we can _append(). Merging and spanning will be delayed until mapping or maybe
not at all when the element can deal with the different memory blocks.
... which controls how to (forcibly) deal with (non-)writable data and
is not necessarily related to identical caps.
In particular, it is also not so helpful anymore with a more advanced
GstVideoFilter subclass which always has a transform_ip method currently,
even though its subclass may not have a corresponding _ip method.
Improve the docs of the get/pull_range functions, define the lifetime of the
buffer in case of errors and short reads.
Make sure the code does what the docs say.
Make it so that one can specify a buffer for get/pull_range where the downstream
element should write into. When passing NULL, upstream should allocate a buffer,
like in 0.10.
We also need to change the probes a little because before the pull probe, there
could already be a buffer passed. This then allows us to use the same PROBE
macro for before and after pulling.
While we're at the probes, make the query probe more powerful by handling the
GST_PAD_PROBE_DROP return value. Returning _DROP from a query probe will now
return TRUE upstream and will not forward the probe to the peer or handler.
Also handle _DROP for get/pull_range properly by not dispatching to the
peer/handler or by generating EOS when the probe returns DROP and no buffer.
Make filesrc handle the non-NULL buffer passed in the get_range function and
skip the allocation in that case, writing directly into the downstream provided
buffer.
Update tests because now we need to make sure to not pass a random value in the
buffer pointer to get/pull_range
Separate the bufferpool and allocator hints in the allocation query, some
of the values don't always make sense together.
Keep the bufferpool and its configuration together.
Keep the allocator and its parameters together.
Allow for multiple bufferpool configurations in the query.
Group the extra allocation parameters in a GstAllocationParams structure to make
it easier to deal with them and so that we can extend them later if needed.
Make gst_buffer_new_allocate() take the GstAllocationParams for added
functionality.
Add boxed type for GstAllocationParams.
Change gst_allocator_alloc() so that we can also spicify flags and padding.
Add 2 new flags to mark the memory 0 prefixed/padded. This allows us to
remove some resizes in the base classes.
When allocating memory, memset prefix and padding with 0 when the flags tell
us to.
On resize, clear the zero padding flags if we can't guarantee the memory is
still 0 filled.
Update tests.
Negotiating padding is needed on second thought so include it in the
ALLOCATION query.
Make the bufferpool take padding into account when allocating.
Make basesrc take padding into account.
Use padding and prefix when allocating in basetransform.
Rework some caps operations so they don't rely on writable caps but instead take
ownership of the input caps and do _make_writable() only when needed.
Remove some const from caps functions, it does not make much sense for
refcounted objects and does not allow us to return a refcount to the const input
caps.
Rework the base classes fixate vmethods to not operate on the caps in-place.
All this saves us around 30% of caps and structure copy and new operations.
Answer the allocation query with FALSE when we are not negotiated yet because at
that point we have no idea if we need to proxy the allocation query or not.
Previously only the last would be pushed, which would cause
invalid running times downstream. This also fixes the handling
of update newsegment events.
The segment start adjustment code in pull mode should never trigger
anymore because the bisection code earlier would have already made
sure that we're at the desired position.
Also move the gap handling some lines below after sending the currently
configured segments. Otherwise we might fill gaps in a segment that is
not configured downstream yet.
Add a vmethod to filter metadata that should be passed upstream. By default,
don't pass anything.
Add a vmethod to transform metadata from the input buffer to the output buffer.
By default, nothing is transformed or copied.
Remove metadata that describes the particular memory of the buffer it is
attached to. We need to do this because in non-passthrough mode we will allocate
new memory for our output buffer.
Improve the propose allocation vmethod by passing the downstream allocation
query to it. This way the vmethod implementation can use properties of the
downstream allocation to generate the upstream query result. If there is no
downstream quety, it means that the element is working in passthrough mode.
Implement a default decide_allocation.
Rename gst_base_transform_suggest to gst_base_transform_reconfigure_sink because
that is what it does. Also remove the caps and size because that is not needed.
Rename gst_base_transform_reconfigure to gst_base_transform_reconfigure_src.
Remove some old unused code in capsfilter.
Always call the propose_allocation method and provide a default implementation
that passes the query on in passthrough mode so that subclasses can also call
this. Also pass if the transform is in passthrough mode so that the
implementation can adjust its algorithm.
Make it possible to also implement non-inplace fixate functions. Let the fixate
function make the caps writable when needed because some fixate functions might
not need to modify the caps.
Make it possible to configure a GDestroyNotify and user_data for
gst_memory_new_wrapped() this allows for more flexible wrapping of foreign
memory blocks.
Use a frame flag to signal to subclass it should reset any retained
state w.r.t. frame parsing since the frame being passed is 'new',
i.e. not related to previously passed and processed data.
Make the pad activation code look more like other activation code.
Only start the sinkpad task when we decide to activate in pull mode, when we
later add srcpad pullmode this will be needed.
... so as to allow the push-mode case to provide data to subclass
on a buffer by buffer basis (as in regular forward case), rather
than all buffers of a fragment chucked together.
Also refactor buffer handling some more, and add some debug.
... since that is already handled by _update_duration, or should not be done
altogether if the duration is determined by non-estimated means.
Fixes#669502.
Clean up the prepare_output_buffer function.
Reuse the input buffer when it is writable and when doing an
in-place but non-passthrough transform.
Move the copy-metadata function call to the prepare_output_buffer default
function. If subclasses implement a custom prepare_output_buffer, they must also
copy the metadata themselves.
Remove a useless memory copy because prepare_output_buffer already did that.
Place the allocator object in the ALLOCATION query instead of the name. This
allows us to exchange allocators that are not in the global pool of allocators.
Update elements for the new api
Add refcounting to the GstAllocator object.
Remove const from functions because the allocator is refcounted now.
Rename the vmethods for consistency
Expose the constructor for GstAllocator and add a destroy notify for the
user_data. This should make it possible to create allocators that are not
registered and shared globally along with the possibility to destroy them
properly.
Update defs with new symbols.
And only forward the allocation query if we're working in
passthrough mode if no ::propose_allocation is implemented.
In place buffer transformations will change the buffer
content and require explicit handling of all metas.
When _clear gets called between _map and _unmap, buffers
will be unreffed. If the adapter was mapped, memory leaks
may occur.
While calling _clear between _map and _unmap does not seem
like such a great idea, this is possible in the audio
encoder base class, as _clear may be called in _finish_frame.
Since the audio encoder relies on flushing to keep track of
timestamps, delaying flushing till after handle_frame seems
dangerous.
So, we unmap on clear, as the next unmap will do nothing.
This makes _clear safe to call between _map and _unmap,
while avoiding leaking the mapped buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=664133
GstBaseParse was not clearing its adapter on reset causing
problems when a pipeline went for example from PLAYING to NULL
state and then back to PLAYING again. The data from the last
stream would be used in the parser.
https://bugzilla.gnome.org/show_bug.cgi?id=667444
There are many good use cases for GstIndex and we want
to add it back again in some form, but possibly not with
the current API, which is very powerful (maybe too powerful),
but also a bit confusing. At the very least we'd need to
make the API bindings-friendly.
Conflicts:
libs/gst/base/gstbasetransform.c
libs/gst/controller/gstinterpolationcontrolsource.c
libs/gst/controller/gstlfocontrolsource.c
plugins/elements/gstfilesrc.c
Dit not merge controller or basetransform changes.
