* Update outgoing segment.base with accumulated time, ensuring all
streams are synchronized.
* Only consider streams as "new" is they have a STREAM_START event
with a different seqnum.
* Use GstStream segment.base instead of separate variable to store
the past running time.
* Disable passthrough
* Switch to glib 2.32 GMutex/GCond
* Avoid getting pad parent the expensive way
* Minor other fixes
This allows the following use-cases to expose the group and pads
before an ALLOCATION query comes through:
* Single stream use-cases
* Multi stream use-cases where all streams sent the CAPS event before
the first ALLOCATION query
Some cases will still make the initial ALLOCATION query fail though,
which isn't optimal, but not fatal (it will recover when pads are
exposed, a RECONFIGURE event is sent upstream and elements can
re-send an ALLOCATION query which will reach downstream elements).
https://bugzilla.gnome.org/show_bug.cgi?id=680262
A caps event is also used to establish that a stream has prerolled.
Without this, we end up allowing negotiation queries to fail, ending
in decoders (and other elements) to not be configured right from the
start with the most optimal settings.
Might just be paranoia, but better safe than sorry. Make sure
the compiler really always passes a 64-bit integer to the
g_object_set() vararg function.
They are not added again by every code path, e.g. when switching
only the deinterlace flag and are missing then.
Fixes bug #678763.
Conflicts:
gst/playback/gstplaysink.c
...and in playbin2 additionally prefer sinks over parsers.
This makes sure that we a) always directly plug a sink if it supports
the (compressed) format and b) always plug parsers in front of decoders.
This avoids that bin being leftover and being found when reusing playbin2,
and fixes restarting on a new URI after failing to activate with a previous
URI.
https://bugzilla.gnome.org/show_bug.cgi?id=673888
For audio/video we should flush too for fastest stream switches but this
currently isn't possible because the flushes would need to go to the sink,
which then causes state changes and causes all timing information to be
changed.
Should work out of the box in 0.11 with the flush-stop that doesn't reset
the times.
Conflicts:
gst/playback/gstplaybin2.c
gst/playback/gstplaysink.c
gst/playback/gstsubtitleoverlay.c
Sending a non-flushing seek might not be enough for switching
to an external sub that has already been used because the flushes
are needed to reset the state of its decodebin's queue.
For example, if the subtitle is short enough, the queue might get
and EOS and keep its 'unexpected' return state. If the user switches
to another subtitle and back to the external one, the buffers
won't get past the queue.
This patch fixes this by adding the flush flag to the seek and
preventing that this flush leaves the suburidecodebin.
https://bugzilla.gnome.org/show_bug.cgi?id=638168
Conflicts:
gst/playback/gstplaybin2.c
Make the uri property getter return the next uri, like it was configured in the
setter.
Make a new current-uri and current-suburi property that reflects the currently
playing uri and suburi.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=676665
This makes sure that we always prefer sinks that support a format without
decoding, independant of its rank. Previously we only sorted by rank.
Conflicts:
gst/playback/gstplaybin2.c
If a property is not found (for example last-sample when
gst_debug_bin_to_dot_file is used while the pipeline is
slightly broken (thus no last-sample) the unref of the item
gvalue which is not refed fails. Only unref if it was found.
The sinkpads are unblocked when going from PAUSED->READY, we need to block them
again when going READY->PAUSED. The blocking of the pad previously only happened
when it was freshly obtained with _request_pad or when the caps changed. If we
don't release the pad when going to READY it was previously never blocked again
causing not-linked errors.
For streaming sources a queue is added before the demuxer, which can not be
properly filled by live sources. As http source can be live sources, this
caused issues for example with http live sources.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674057
Adds a property for playsink to define how it should handle
events sent in send_event function. The default is the same as
GstBin's, sending events to all internal sinks. There is also
mode-first, that will send to sinks until the one handles the
event successfully.
https://bugzilla.gnome.org/show_bug.cgi?id=673211
When the video sink is a fakesink, which does not implement the
navigation interface, playsink will drop the navigation command.
In this case, send to the video sink as a fallback. It breaks
the interface abstraction, but is better than just dropping the
navigation event.
We need to call the default query handler of the proxy pad because only that one
will forward the query to the target pad in case of the allocation query.
After a PAUSED->READY change the sink pads are currently not set to
blocking state. When the element is set back to PAUSED, the change will
be done asynchronously, but as the _pad_blocked_cb() callback is now not
called, the state change never completes.
Fix that by setting the sink pads to blocking state on a PAUSED->READY
change, which ensures that the _pad_blocked_cb() is called when needed
on any future READY->PAUSED change. The sink pads are already put to
blocking state on NULL->READY change, so this behavior is consistent.
Fixes bug #668097.
In order to allow for proper functionality when a decoder only supports
one instance at a time (dsp), we must block the demuxer pads when they
get created if they are not part of the active group, preventing buffers
from being sent to the decoder (and initializing it through setcaps),
then after we switch to a new group, we unblock the demuxer pads for
the active groups. In the callback for the unblock, we prune the old
groups, making sure the previous decoder instance is destroyed before
we push a buffer to the new instance.
Since caps are no longer 'shared' between two pads (but forwarded from
source pad to sink pad) we end up with the first chain pad not having
specified caps (i.e. typefind:src).
This solves the issues by getting the pad's peer caps.
It is not optimal since it will (for most demuxers) return the pad
template caps, which might contain non-fixed caps (ex : with
qtdemux "video/quicktime; video/mj2; audio/x-m4a; application/x-3gp")
https://bugzilla.gnome.org/show_bug.cgi?id=667337
... to avoid unnecessary spurious errors (upon e.g. shutdown).
If a real error is applicable in this unusual circumstance (missing other pad),
other (STREAM_LOCK protected) call paths can take care of that.
... to also properly indicate chain's endpad if no elements are in the
chain (due to the endpad being a raw demuxer pad, or one setup without
decoders since uridecodebin or higher up decided not to need those).
Previously we always used textoverlay for rendering the output of
a parser, now the same code as for the renderers is used and the
element with the highest rank is used.
Fixes bug #663822.
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.
Replace g_thread_create() with g_thread_try_new().
Make appsink return a GstSample. Remove the pull_buffer_list method because it
is not very useful anymore.
Pass GstSample to the conversion function.
Update playbin2 and examples
This happens when the internal elements are added before any NEWSEGMENT
event arrived and in that case we shouldn't send a NEWSEGMENT event
to the internal elements at all. They will get the NEWSEGMENT event
from upstream later.
If the sink supports raw audio/video, we first check
if the decoder could output any raw audio/video format
and assume it is compatible with the sink then. We don't
do a complete compatibility check here if converters
are plugged between the decoder and the sink because
the converters will convert between raw formats and
even if the decoder format is not supported by the decoder
a converter will convert it.
We assume here that the converters can convert between
any raw format.
Fixes bug #665120.
After preroll the multiqueue limits are still set to the preroll
limits if use-buffering is set to TRUE. In that case we only want
time limits on the multiqueue if upstream is seekable.
Such streams were detected as seekable, as the query on the typefind
element was testing the m3u8 file listing the actual streams, and
not going through the demuxer(s).
We now check for seekability for each multiqueue following a demuxer,
so the query will flow through the elements which might prevent seeking.
https://bugzilla.gnome.org/show_bug.cgi?id=647769
The ghostpad acceptcaps functions are not valid in this case because
we don't only accept the caps accepted by the target but could also
insert converters. Fixes bug #663892.
This allows us to easily get ahold of all pads on a stream-topology message, including
pre-decoder ones, while "pad" only gives us access to the raw pads (as used by discoverer).
Set up targets on READY->PAUSED state change to passthrough by
default. This prevents the targets from being unset on the
first run, while the 'raw' variable would mean that some
target is set.
The identity element should be handled by the GstBin's cleanup,
removing it on the remove_elements function might remove it
too soon, as this function can be called directly from playsink
The playsink was nastily poking a boolean in the structure.
Make those booleans properties, so we are told when they change,
and rebuild the conversion bin when they do.
Some cleanup to go with it too.
https://bugzilla.gnome.org/show_bug.cgi?id=661262
ie, audio/x-raw- for audio, video/x-raw- for video.
Add a trailing - to be more specific. I doubt there's anything
like audio/x-rawhide or something, but you never know.
https://bugzilla.gnome.org/show_bug.cgi?id=661262
The code was doing counterintuitive rewiring of pads when the
bin did not contain any elements. We now add an identity element
in that case, which makes it simpler, and should fix the AC3
passthrough mode when using pulseaudio (but I don't see the bug
here so can't test).
https://bugzilla.gnome.org/show_bug.cgi?id=661262
This is made possible by filtering errors. This is required to let
harware accelerated element query the video context. The video context
is used to determine if the HW is capable, and thus if the element is
supported or not.
Fixes bug #662330.
If the pad block never happens because there is no data flow at all, the
callback is never fired and the reference is never released. This causes a
reference cycle between the pad and element, so valgrind is not very vocal
about it (memory is still reachable).
The bins' getcaps was bypassing the inner elements, and thus
failing to account for the caps transformations they allow,
which caused YUV video pipelines to fail with ximagesink, which
does not support YUV, even though the convenience bin includes
a colorspace converter for just this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=660816
The new code was checking for a prefix, and would find video/
first. Check in two passes, first checking for a perfect match,
and falling back to a prefix check if nothing was found.
https://bugzilla.gnome.org/show_bug.cgi?id=657261
The fact that a decoder is not compatible with the fixed sink
is currently happenning in the case where we have hardware accelerated
video decoders on the system (especially vaapi elements that are actually plugged),
and the user is providing a sink that doesn't support the surface.
A simple example that shows how it used to crash on a system where gstreamer-vaapi
is installed:
gst-launch playbin2 video-sink=xvimagesink uri=/codec/supported/by/vaapi
What we are now doing in this case, is avoid using the accelerated
decoder and plug a "normal" decoder instead (if avalaible).
This commit doesn't handle the case where we have hardware accelerated
demuxing.
gstsubtitleoverlay.c: In function 'gst_subtitle_overlay_video_sink_event':
gstsubtitleoverlay.c:1736:22: error: 'target' may be used uninitialized in this function
With unfixed caps we can't reliably decide if the final caps
are going to be "raw" (e.g. supported by a sink) or not.
We will get here again later when the caps are fixed.
If subdrained isn't initialized to FALSE then a chain might think
that its group is drained when in fact it's not and this can cause
a switch too early or even cause a deadlock.
This reverts commit b0b4e286c8.
We agreed that the previous (pre-.35) behaviour is broken and a bug and the
current behaviour is correct, deterministic and allows the application to
handle stuff properly while the old behaviour can't be handled properly by
applications and just worked in some applications by luck.
The solution to the problem that was solved by relying on the old, broken
behaviour would be, to make decodebin2/playbin2 more aware of decoders and
improve the autoplugging of decoders by considering the caps supported by the
sink instead of just using something with the highest rank.
See bug #656923.
Fixes regression since 0.10.33 where sinks that can cope with non raw
caps or custom caps are not autoplugged if there's a sink configured
with the properties video-sink and audio-sink which cannot handle
the stream. This change checks for compatibility on the configured one
and use it if success. Otherwhise it tries with the found factories.
This reverts commit a22faad18a. Instead
of disabling subtitles completelly when video stream have custom caps,
just let the sutbtileoverlay cope with them as now it's able to.
Implement handling of non raw video streams by avoiding colorspace
elements and autoplugging a compatible renderer if available. Fallback
to passthrough if no compatible renderer is found.
Only log in debug log for now, since the check is a bit
half-hearted, its purpose is mostly to make sure people
use gst_filename_to_uri() or g_filename_to_uri().
https://bugzilla.gnome.org/show_bug.cgi?id=654673
g_value_get_object() does not give us our own ref.
Fixes "Trying to dispose object "flacparse", but it still has a parent "registry0".
You need to let the parent manage the object instead of unreffing the object directly."
and similar warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=658416
This is done by adding a capsfilter after every parser/converter that contains
all possible caps supported by downstream elements. A capsfilter is necessary
here because the decoder is only selected after the parser selected a format
and the parser can't know what downstream would support otherwise.
This reverts commit 105814e2c7.
The general consensus seems to be that we should revert this for
now. If such behaviour is desired, we should probably enable it
via a flag. And maybe use the scaletempo plugin instead.
Make enums for the chroma siting for easier use in the videoinfo.
Make enums for the color range, color matrix, transfer function and the
color primaries. Add these values to the video info structure in a Colorimetry
structure. These values define the exact colors and are needed to perform
correct colorspace conversion. Use a couple of predefined colorimetry specs
because in practice only a few combinations are in use.
Add view_id to the video frames to identify the view this frame represents in
multiview video.
Remove old gst_video_parse_caps_framerate, use the videoinfo for this.
Port elements to new colorimetry info.
Remove deprecated colorspace property from videotestsrc.
Rework the audio caps similar to the video caps. Remove
width/depth/endianness/signed fields and replace with a simple string
format and media type audio/x-raw.
Create a GstAudioInfo and some helper methods to parse caps.
Remove duplicate code from the ringbuffer and replace with audio info.
Use AudioInfo in the base audio filter class.
Port elements to new API.
Instead of just assuming all pads are created at the same time,
remember which ones are actually new (via ->pending_blocked_pads).
This allows the following use-case to properly work:
* Upstream starts with audio-only
* Only that pad gets data, blocks and a real audio sink is created
* Upstream laters adds a video stream
* A new pad is requested, blocks and reconfiguration kicks in in
order to add a new real video sink
When we don't have specific {audio|video|text}-sink properties, don't
set them on playsink when reconfiguring.
If we do that, we end up setting the previous configured sink to
GST_STATE_NULL resulting in any potentially pending push being returned
with GST_FLOW_WRONG_STATE which will cause the upstream elements to
silently stop.
https://bugzilla.gnome.org/show_bug.cgi?id=655279
When we have a multi-stream (i.e. audio and video) input and the demuxer
adds/removes pads for a new stream (common in a mpeg-ts stream when the
program stream mapping is updated), the algorithm for EOS handling was
previously wrong (it would only drop the EOS of the *last* pad but would
let the EOS on the other pads go through).
The logic has only been changed a tiny bit for EOS handling resulting in:
* If there is no next group, let the EOS go through
* If there is a next group, but not all pads are drained in the active
group, drop the EOS event
* If there is a next group and all pads are drained, then the ghostpads
will be removed and the EOS event will be dropped automatically.
This allows us to make parsers accept both parsed and unparsed input
without decodebin plugging them in a loop until things blow up, ie.
without affecting applications that still use the old playbin or the
old decodebin.
(Making parsers accept parsed input is useful for later when we want
to use parsers to convert the stream-format into something the decoder
can handle. It's also much more convenient for application authors
who can plug parsers unconditionally in transcoding pipelines, for
example).
This is especially needed when switching between a non-sparse and sparse
video stream, see bug #537382. It also lowers the time needed for switching
between streams a bit.
In particular, in audio only cases whose (estimated) metadata provides bitrate
information, the buffer-size based on such bitrate (and buffer-duration)
will be much more reasonable than queue2 default buffer-size.
For streams at low bitrates we need to set a limit in time because the limit
in bytes might not reached too late, sometimes more than 30 seconds.
This limit can only be set if upstream is seekable (see #584104)
Closes#647769
These reconfigure based on the caps and plugin in converters if
necessary. This also makes switching between compressed and raw
streams work flawlessly without loosing the states of any element
somewhere or having running time problems.
Before playbin2 would use different selectors for raw audio and
compressed audio (and the same for video) and used different
pads from playsink. This made the involved logic much more
complex and was not implemented completely in playsink, which
made it impossible to support files with a compressed and
uncompressed stream that is support by the sink.
playbin2 handles raw/non-raw streams the same now and the
decision is left to playsink, which now can also handle
caps changes from raw to non-raw and the other way around.
Fixes bug #632788.
